CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
|
|
|
- Kevin McCormick
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 23/12/
2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 23/12/
3 CANCELLATION PROCEEDINGS under Section 19 of the Designs Act, 2000 The Ld. Asstt. Controller of Patents & Designs passed an order on 20/12/2011 to cancel the registration of registered Design No dated 26/6/2009 under Class titled as Footwear in the name of Asian Rubber Industries, 69, Najafgarh Road, New Delhi , India, an Indian partnership firm whose partners are Ashok Kumar, Manav Arora and Smt. Kannchan, All Indian national of the above address The Patent Office Journal 23/12/
4 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown Design Number Class )X6d Ltd., 199 Arch Makarios III Ave 3030 Limassol Cyprus Date of Registration 10/09/2010 3d Glasses 29/349, /03/2010 U.S.A. Design Number Class )Dev Marketing Nr. Bhilai way, Bridge Furniture street, Jilla Garden main Road, Bapunagar, Rajkot- GUJARAT, (India) Date of Registration 20/01/2011 Handle Design Number Class )3m Innovative Properties Company., 3M Center, Saint Paul, Minnesota , USA., Date of Registration 24/02/2011 Helmet 29/368, /08/2010 U.S.A. The Patent Office Journal 23/12/
5 Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 Ba Eindhoven, The Netherlands Date of Registration 28/02/2011 Analyzer for point of Care Diagnostics /08/2010 OHIM Design Number Class )SATA GmbH & Co. KG Domertalstrasse 20, Kornwestheim, Deutschland, Germany. Date of Registration 11/10/2010 Manometer /04/2010 Germany Design Number Class )Ajanta Manufacturing Limited Ajanta Corporate House, 8A National Highway, Same Kanthe, Morbi , Dist. Rajkot, State of Gujarat, India Date of Registration 10/02/2011 Regulator The Patent Office Journal 23/12/
6 Design Number Class )LEGO A/S Aastvej 1, Dk-7190 Billund, Denmark Date of Registration 15/04/2011 Building Block From Toy Building Set /01/2011 OHIM Design Number Class )Federal Elektrik Yatirim Ve Ticaret Anonim Sirketi 1. Organize Sanayi Bolgesi, Hanli Beldesi Sakarya/Turkey Date of Registration 18/03/2011 Miniature Circuit Breaker Design Number Class )Manika Moulds Pvt. Ltd., Aar-Pee Centre, , 6th Floor Guffic Compound, MIDC, Andheri(E), Mumbai , Maharashtra, India Date of Registration 22/03/2011 Battery Container The Patent Office Journal 23/12/
7 Design Number Class )Jay Time Industries 6/4, Gokul Nagar, Opp: Harishran Welding, Near Nathji Pan, 50 Feet Road, Kothariya Road, Rajkot-GUJARAT (India) Date of Registration 08/02/2011 Handle Design Number Class )Ma Design India Private Limited A-41, Sector-80, Phase-II, Noida , U.P. India., Date of Registration 04/07/2011 Cheese Board Design Number Class )Grohe Ag Industriepark Edelburg Hemer, Germany Date of Registration 06/07/2011 Faucet /01/2011 OHIM The Patent Office Journal 23/12/
8 Design Number Class )Sathya Auto Private Limited No. 133, Sidco Industrial Estate, Thirumazhisai, Chennai , India Date of Registration 12/07/2011 Jack Design Number Class )Hendrickson Usa, L.L.C., 500 Park boulevard, Suite 1010, Itasca, Illinois , United States of America Date of Registration 07/03/2011 Saddle For A Suspension 29/369, /09/2010 U.S.A. Design Number Class )Fumex Ab., Verkstadsvagen 2, SKELLEFTEA, Sweden Date of Registration 09/03/2011 Ventilation Equipment /09/2010 OHIM The Patent Office Journal 23/12/
9 Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 23/05/2011 Tyre For Bicycle Design Number Class )HANSGROHE AG., Auestr. 5-9, D Schiltach, Germany Date of Registration 24/05/2011 Sanitary Faucet/Fitting /11/2010 OHIM Design Number Class )Nitto Denko Corporation 1-2, Shimohozumi 1-chome, Ibaraki-shi, Osaka , Japan Date of Registration 23/02/2011 Winding Core /08/2010 Japan The Patent Office Journal 23/12/
10 Design Number Class )Automatic Technology (Australia) Pty Ltd; 6-8 Fiveways Boulevard, Keysborough, Victoria 3173, Australia. Date of Registration 01/03/2011 Door Operator Unit 13793/ /09/2010 Australia Design Number Class )Reckitt Benckiser Llc., Morris Corporate Centre IV, 399 Interpace Parkway, Parsippany, New Jersey 07054, USA Date of Registration 17/02/2011 Dispenser /08/2010 OHIM Design Number Class )McNeil PPC INc 199 Grandview Road, Skillman, Nj 08558, USA Date of Registration 21/04/2011 Replaceable Toothbrush Head 29/377,588 22/10/2010 U.S.A. The Patent Office Journal 23/12/
11 Design Number Class )Gandhi Automations Pvt. Ltd., 2nd Floor, Chawda Commercial Centre, Link Road, Malad (West), Mumbai , Maharashtra, India Date of Registration 22/06/2011 Shutter (Shop) Design Number Class )Raj Bharti Plastics Pvt. Ltd., C/o Manubhai and Company, 94 Vithalwadi, Canara Bank Building, Kalbadevi Road, Mumbai Date of Registration 23/06/2011 Comb Design Number Class )Maya Appliances Private Limited #2 (Old No: 8), I Avenue, Boat Club, Chennai Date of Registration 21/12/2010 Mixer Grinder Jar The Patent Office Journal 23/12/
12 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 21/03/2011 Mixer Grinder Design Number Class )M/s FNS International Pvt. Ltd., ITL Twin Tower, B-09, 313, 3rd Floor, Netaji Subhash Palace, Pitampura, Delhi (India) Date of Registration 09/02/2011 Spoon Design Number Class )Columbus Premier Shoe Private Limited B-1/6, Paschim Vihar, New Delhi , India., Date of Registration 10/02/2011 Shoe The Patent Office Journal 23/12/
13 Design Number Class )Ajanta Manufacturing Limited Ajanta Corporate House, 8A National Highway, Same Kanthe, Morbi , Dist. Rajkot, State of Gujarat, India Date of Registration 10/02/2011 Socket Design Number Class )Tahiliani Design Pvt. Ltd. 708 Pace City -2 Sector -37, Part II, Gurgaon (Haryana) Date of Registration 29/04/2011 Garment Design Number Class )Honda Motor Co. Ltd., 1-1 Minami -Aoyama2- Chome, Minato- Ku Tokyo Japan Date of Registration 09/05/2011 Rear Combination Lamp For Automobile /11/2010 Japan The Patent Office Journal 23/12/
14 Design Number Class )Hariom Industries 12, Aarti Society Corner, 80 Feet Road, B/h Atika Industrial, Nr. Yash Pan, Neharunagar Road, Rajkot Gujarat (India) Date of Registration 13/12/2010 Handle Design Number Class )Anderson Power Products INC 13 Pratts Junction Road Sterling MA United State Of America Date of Registration 21/04/2011 Plug For Tool-Releasable Solar Power Connector 29/388,660 31/03/2011 U.S.A. Design Number Class )The Supreme Industries 601Central Plaza, 2/6, Sarat Bose Road, Kolkata , West Bengal, India. Date of Registration 27/06/2011 Chair The Patent Office Journal 23/12/
15 Design Number Class )Rana Sugars Limited (Distillery Division) Village Loukha, Teshsil Patti, District Tarn Taran (Punjab) India Date of Registration 28/06/2011 Bottle Design Number Class )Wim Plast Limited 5, Vakil Industrial Estate, Walbhat Road, Goregaon (East), Mumbai , Maharashtra, India. Date of Registration 28/06/2011 Table Design Number Class )M/s. Jiger Plast (India) 4/8, Corporate Avenue, New Udyog Bhavan, Sonawala Road, Goregaon (E), Mumbai: Maharashtra, India. Date of Registration 14/03/2011 Casserole The Patent Office Journal 23/12/
16 Design Number Class )Toyota Jidosha Kabushiki Kaisha., 1, Toyota-Cho, Toyota-Shi, Aichi-Ken, , Japan Date of Registration 21/03/2011 Automobile Design Number Class )Hole-In-The Education Limited 8, Balaji Estate, Sudershan Munjal Marg, Kalkaji, New Delhi , India. Date of Registration 28/04/2011 Kiosk Design Number Class )Tahiliani Design Pvt. Ltd. 708 Pace City -2 Sector -37, Part II, Gurgaon (Haryana) Date of Registration 29/04/2011 Garment The Patent Office Journal 23/12/
17 Design Number Class )Fm Merketing gmbh 23, A-5162 Obertrum am See, Austria Date of Registration 04/03/2011 Wireless Remote Control /09/2010 OHIM Design Number Class )Hendrickson Usa, L.L.C., 500 Park boulevard, Suite 1010, Itasca, Illinois , United States of America Date of Registration 07/03/2011 Spring Housing For A Suspension 29/369, /09/2010 U.S.A. Design Number Class )Fumex Ab., Verkstadsvagen 2, SKELLEFTEA, Sweden Date of Registration 09/03/2011 Ventilation Equipment /09/2010 OHIM The Patent Office Journal 23/12/
18 Design Number Class )LTA Corporation C/o. Goelet Llc 425 Park Avenue New York, Ny United States Of America Date of Registration 19/01/2011 Airship 29/366, /07/2010 U.S.A. Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio-45202, United States of America Date of Registration 23/03/2011 Packaging Container 29/375, /09/2010 U.S.A. Design Number Class )Reckitt Benckiser Llc., Morris Corporate Centre IV, 399 Interpace Parkway, Parsippany, New Jersey 07054, USA Date of Registration 17/02/2011 Dispenser /08/2010 OHIM The Patent Office Journal 23/12/
19 Design Number Class )Gandhi Automations Pvt. Ltd., 2nd Floor, Chawda Commercial Centre, Link Road, Malad (West), Mumbai , Maharashtra, India Date of Registration 22/06/2011 Shutter (Shop) Design Number Class )Wim Plast Limited 5, Vakil Industrial Estate, Walbhat Road, Goregaon (East), Mumbai , Maharashtra, Mumbai, India Date of Registration 28/06/2011 Chair Design Number Class )Nitto Denko Corporation 1-2, Shimohozumi 1-chome, Ibaraki-shi, Osaka , Japan Date of Registration 15/12/2010 Vent Filter for A Device for Generating, Storing, Converting or Employing Energy /06/2010 Japan The Patent Office Journal 23/12/
20 Design Number Class )Noslar International Pvt. Ltd., C-3/2, Wazirpur Industrial Area, Delhi , India Date of Registration 21/12/2010 Tyre Design Number Class )Buhler Sortex Ltd., 20 Atlantis Avenue, London E16 2BF, United Kingdom Date of Registration 17/03/2011 Sorting and Inspection Apparatus For Food Products Design Number Class )SOCO, LLC., Delaware, of 41E. All Saints Street, Suite 100, Frederick, MD USA Date of Registration 28/02/2011 Spin-Art Apparatus 29/369, /09/2010 U.S.A. The Patent Office Journal 23/12/
21 Design Number Class )Jay Machine Tools 3 Umakant Udhyognagar, Near Ashok Garden, Rajkot, Gujarat-India Date of Registration 31/05/2011 Piston Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 01/06/2011 Tyre For Bicycle Design Number Class )Indo Alusys Industries Limited 606, Tolstoy House, 15, Tolstoy Marg, New Delhi Date of Registration 06/06/2011 Sliding Interlock The Patent Office Journal 23/12/
22 Design Number Class )Minda Industries Limited Vill, Nawada Fatepur, P.O. Sikanderpur Badda, Manesar, Distt. Gurgaon, Haryana , India Date of Registration 04/02/2011 Fender Lamp For Vehicle Design Number Class )Apple Inc., 1 Infinite Loop, Cupertino, California 95014, Usa. Date of Registration 07/02/2011 Electronic Device 29/367, /08/2010 U.S.A. Design Number Class )Ajanta Manufacturing Limited Ajanta Corporate House, 8A National Highway, Same Kanthe, Morbi , Dist. Rajkot, State of Gujarat, India Date of Registration 10/02/2011 Socket The Patent Office Journal 23/12/
23 Design Number Class )S.C. Johnson & Son, Inc., 1525 Howe Street, Racine, Wisconsin , United State of America Date of Registration 24/12/2010 Dispenser 29/364, /06/2010 U.S.A. Design Number Class )Parmigiani Fleurier SA., 11, Rue Du Temple, 2114 Fleurier, Switzeland Date of Registration 04/03/2011 Watch Casing Body N DM/ /09/2010 WIPO Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 23/05/2011 Tyre For Bicycle The Patent Office Journal 23/12/
24 Design Number Class )Ccs Inc., 374 Okauencho, Shimodachiri-agaru, Karasuma-dori, Kamigyo-ku, Kyoto-city, Kyoto , Japan Date of Registration 28/03/2011 Light Emitting Diode Lamp /10/2010 Japan Design Number Class )Hisamitsu Pharmaceutical Co., Inc., 408, Tashirodaikan-machi, Tosu-shi, Saga, , Japan Date of Registration 31/01/2011 Packing Box D /12/2010 Japan Design Number Class )Efforts Polymers Pvt. LTd., 208, 2nd Floor, Avinash Mansion, 82/3, Joshi Road, Karol Bagh, New Delhi , (INDIA) Date of Registration 13/06/2011 Speed Breaker The Patent Office Journal 23/12/
25 Design Number Class )Faber-Castell Aktiengesellschaft Nurnberger Strasse 2, D Stein, Germany Date of Registration 28/02/2011 Grip Marker /11/2010 OHIM Design Number Class )Real Food Exporters Private Limited Mascarenhas Building, 3rd Floor, M.G. Road, Panjim, Goa , India Date of Registration 14/02/2011 Bottle Design Number Class )Draeger Medical Systems, Inc., 3135 Quarry Road, Telford, PA-18969, United States of America Date of Registration 25/04/2011 Enclosure For Patient Monitor The Patent Office Journal 23/12/
26 Design Number Class )Hindustan Unilever Limited Hindustan Lever House Backbay Reclamation, Mumbai , Maharashtra, India Date of Registration 07/06/2011 Bottle Without Cap /12/2010 OHIM Design Number Class )V2 Corp WZ-8/1, Industrial Area, Kirti Nagar, New Delhi , India Date of Registration 21/10/2010 Bottle. Design Number Class )Nemoto Kyorindo Co. Ltd., 27-20, Hongo 2-chome, Bunkyo-ku, Tokyo , Japan Date of Registration 01/02/2011 Liquid Injector The Patent Office Journal 23/12/
27 Design Number Class )Tahiliani Design Pvt. Ltd. 708 Pace City -2 Sector -37, Part II, Gurgaon (Haryana) Date of Registration 29/04/2011 Garment Design Number Class )Shanghai Wingtech Electronis Technology Co., Ltd., Room 6B01, G Area, No.666, East Beijing Road, Huangpu District, Shanghai, P.R. China Date of Registration 28/12/2010 Mobile Phone /07/2010 China Design Number Class )LTA Corporation C/O Goelet Llc 425 Park Avenue New York, Ny United States Of America Date of Registration 19/01/2011 Airship 29/366, /07/2010 U.S.A. The Patent Office Journal 23/12/
28 Design Number Class )Nec Corporation 7-1, Shiba 5-chome, Minato-ku, Tokyo. Japan Date of Registration 25/02/2011 Settlement Terminal /08/2010 Japan Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 BA Eindhoven, The Netherlands Date of Registration 20/04/2011 Filter For Tea Maker /10/2010 OHIM Design Number Class )Wim Plast Limited 5, Vakil Industrial Estate, Walbhat Road, Goregaon (East), Mumbai , Maharashtra, Mumbai, India Date of Registration 28/06/2011 Chair The Patent Office Journal 23/12/
29 Design Number Class )M/s. RUNGTA PLASTIC INDUSTRIES B/63, Yash Bungalows, Opp. Jagdishnagar Society, Bh. hariomnagar, Ghodasar, AHMEDABAD-50. (Gujarat State) INDIA Date of Registration 18/03/2011 Valve Design Number Class )Manika Moulds Pvt. Ltd., Aar-Pee Centre, , 6th Floor Guffic Compound, MIDC, Andheri(E), Mumbai , Maharashtra, India Date of Registration 22/03/2011 Battery Container. Design Number Class )Indo Alusys Industries Limited 606, Tolstoy House, 15, Tolstoy Marg, New Delhi Date of Registration 06/06/2011 Sliding Interlock The Patent Office Journal 23/12/
30 Design Number Class )Manika Moulds Pvt. Ltd., Aar-Pee Centre, , 6th Floor Guffic Compound, MIDC, Andheri (E), Mumbai , Maharashtra, India Date of Registration 09/02/2011 Battery Container Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 BA Eindhoven, The Netherlands Date of Registration 06/07/2011 Speaker /01/2011 OHIM Design Number Class )Alpine Polyrub Pvt. Ltd., A-20, Mangol Puri Industrial Area, Phase-2, New Delhi , (India) Date of Registration 19/07/2011 Footwear The Patent Office Journal 23/12/
31 Design Number Class )Pole Star Distribution Private Limited G-2, "V.S. Manor", 2, Mannar Street, T. Nagar, Chennai , India Date of Registration 28/03/2011 Torch Design Number Class )ZEBRA CO. LTD., 2-9, Higashi-gokencho, Shinjuku-ku, Tokyo Japan Date of Registration 08/03/2011 Ballpoint Pen D /09/2010 Japan Design Number Class )B. Braun Melsungen Ag., Carl-Braun-Strasse 1, Melsungen, Federal Republic of Germany Date of Registration 10/11/2010 Bag for The Administration of Drugs and Feeds /05/2010 OHIM The Patent Office Journal 23/12/
32 Design Number Class )Hisamitsu Pharmaceutical Co. Inc., 408, Tashirodaikan-machi, Tosu-shi, Saga, , Japan Date of Registration 31/01/2011 Packing Box D /12/2010 Japan Design Number Class )The Gillette Company Ip/Legal Patent Derpartment -3E One Gillette Park Boston 02127, United State Of America Date of Registration 17/06/2011 Shaving Razor Handle And Cartridge Dispenser. 29/381,416 20/12/2010 U.S.A. Design Number Class )Ajanta Manufacturing Limited Ajanta Corporate House, 8A National Highway, Same Kanthe, Morbi , Dist. Rajkot, State of Gujarat, India Date of Registration 10/02/2011 Residual Current Circuit Breaker The Patent Office Journal 23/12/
33 Design Number Class )LEGO A/S Aastvej 1, Dk-7190 Billund, Denmark Date of Registration 15/04/2011 Building Block For Toy Building Set /01/2011 OHIM Design Number Class )Hindustan Unilever Limited Hindustan lever House Backbay Reclamation, Mumbai , State of Maharashtra, India Date of Registration 19/04/2011 Carbon Block for Water Purifier /10/2010 OHIM Design Number Class )Wim Plast Limited 5, Vakil Industrial Estate, Walbhat Road, Goregaon (East), Mumbai , Maharashtra, Mumbai, India Date of Registration 28/06/2011 Table The Patent Office Journal 23/12/
34 Design Number Class )Mr. Lalit Ramjibhai Thummar Nilkanth Park, Block No. H=36/1, Sheri No.6, B/h. Nilkant Cinema, Kothariya Main Road, Rajkot. Gujarat-India Date of Registration 23/12/2010 Railing Accessories (Metal Fitting). Design Number Class )ARKRAY, Inc., 57, Nishiaketa-cho, Higashikujo, Minami-Ku, Kyoto-shi, Kyoto, Japan Date of Registration 17/03/2011 Blood Glucose Level Measuring Device /09/2010 Japan Design Number Class )Dorma India Private Limited 14, Pattulous Road, Chennai , Tamil Nadu, India Date of Registration 22/03/2011 Metal Fitting - Glass Link (One Arm) The Patent Office Journal 23/12/
35 Design Number Class )Life Technologies Corporation State of Delaware, of 5791 Van Allen Way, Carlsbad, California 92008, USA Date of Registration 01/02/2011 Fluorometer 29/367, /08/2010 U.S.A. Design Number Class )M/s FNS International Pvt. Ltd., ITL Twin Tower, B-09, 313, 3rd Floor, Netaji Subhash Palace, Pitampura, Delhi (India) Date of Registration 09/02/2011 Spoon Design Number Class )The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, Boston, 02127, United States of America Date of Registration 27/04/2011 Shaving Cartridge 29/377, /10/2010 U.S.A. The Patent Office Journal 23/12/
36 Design Number Class )Tahiliani Design Pvt. Ltd. 708 Pace City -2 Sector -37, Part II, Gurgaon (Haryana) Date of Registration 29/04/2011 Garment Design Number Class )Manoj Bohra R-14/15, Jaishri Dhan Society, Bangur Nagar, Goregaon (W), Mumbai , India. Date of Registration 07/07/2011 Bottle Design Number Class )Hindustan Unilever Limited Hindustan Lever House Backbay Reclamation, Mumbai , State of Maharashtra, India Date of Registration 11/07/2011 Bottle With Pump /01/2011 OHIM The Patent Office Journal 23/12/
37 Design Number Class )Pradeepkumar Nandlal Dhoot Gangapurwala, 2275 Adat Bazar, Ahmednagar , Maharashtra, India Date of Registration 03/03/2011 Lcd Television Design Number Class )Parker Pen Products Halifax Avenue, Fradley Park, Lichfield, Staffordshire, WS13 8SS, United Kingdom Date of Registration 11/03/2011 Writing Instrument Design Number Class )Karp Jewellery Mfg. Hk Limited Rooms , 10/F, Tower 2, Harbour Center, 8 Hok Cheung Street, Hunghon, Kowloom, Hong Kong Date of Registration 13/09/2010 Diamond Jewellery The Patent Office Journal 23/12/
38 Design Number Class )Samir Joseph Nazareth No. 7, Indira Sagar Apartments, RT Road, Civil Lines, Nagpur , India Date of Registration 28/03/2011 Toilet Brush Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Design Number Class Vacuum Circuit Breaker 1)Mahindra & Mahindra Ltd., Gateway Building, Apollo Bunder, Mumbai , Maharashtra, India., Date of Registration 19/07/2011 Front Bumper For Vehicle The Patent Office Journal 23/12/
39 Design Number Class )Valbia S.R.L., Via A, Canossi 31, I Brozzo (Brescia), Italy Date of Registration 04/11/2010 Actuator Design Number Class )Welspun Retail Limited B-Trade World; 9th Floor, Kamla Mills, Compound; Senapati Bapat Marg; Lower Parel; Mumbai , Maharashtra, India Date of Registration 20/01/2011 Bed Sheet and Pillow Cover (Set) Design Number Class )Max Co. Ltd., 6-6, Nihonbashi Hakozaki-cho, Chuo-ku, Tokyo , Japan Date of Registration 13/06/2011 Staple Refill /12/2010 Japan The Patent Office Journal 23/12/
40 Design Number Class )Yash Agarwal S/o. Dr. Nawal Kishore Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj)., India Date of Registration 03/03/2011 Necklace and Earrings (Set) Design Number Class )Honda Motor Co. Ltd., 1-1, Minami-Aoyama 2-chome, Minato-ku, Tokyo, Japan Date of Registration 06/05/2011 Front Cowl For Motorcycle /11/2010 Japan Design Number Class )Ajanta Manufacturing Limited Ajanta Corporate House, 8A National Highway, Same Kanthe, Morbi , Dist. Rajkot, State of Gujarat, India Date of Registration 10/02/2011 Telephone Socket The Patent Office Journal 23/12/
41 Design Number Class )Neoperl GmbH Klosterrunsstr Mullheim Germany Date of Registration 15/02/2011 Flow Controller /10/2010 OHIM Design Number Class )Aloys F. Dornbracht GmbH & Co. KG, Kobbingser Muhle 6, D Iserlohn, Germany Date of Registration 25/04/2011 Basin Mixer /12/2010 OHIM Design Number Class )Kyndal India Pvt. Ltd., L-19/8, DLF Phase-2, Gurgaon , Haryana, India Date of Registration 29/06/2011 Bottle The Patent Office Journal 23/12/
42 Design Number Class )Aneja Food Products "Naraingarh, G.T. Road, chheharta , Distt.Amritsar, Punjab State, India Date of Registration 17/03/2011 Jar Design Number Class )Demag Cranes & Components GmbH Ruhrstrasse 28, Wetter, Germany Date of Registration 21/03/2011 Rail For Hoists & Conveyors /09/2010 OHIM Design Number Class )Tahiliani Design Pvt. Ltd. 708 Pace City -2 Sector -37, Part II, Gurgaon (Haryana) Date of Registration 29/04/2011 Garment The Patent Office Journal 23/12/
43 Design Number Class )Nayasa Homeware Survey No. 367/16 & 378/2 Kachigam, Nani Daman, daman , (Union Territories) Daman Union Territories, India., Date of Registration 03/05/2011 Vacuum Flask. Design Number Class )Grohe Ag Industriepark Edelburg Hemer, Germany Date of Registration 06/07/2011 Faucet /01/2011 OHIM Design Number Class )Khushi Enterprise 5 Santoshpark Behind Ranuja Temple Kotharia Main Road Kotharia Rajkot Gujrat India Date of Registration 07/07/2011 Handle The Patent Office Journal 23/12/
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
PR70. Meter, Mix and Dispense Systems Ordering Information
PR70 Meter, Mix and Dispense Systems Ordering Information PR70 System Comparisons PR70e PR70 PR70 PR70v with LCM with DM with ADM with ADM System Configured system? No Yes Yes Yes Ratios Fixed Ratio 1:1
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Two-Component Hydraulic Fixed Ratio Metering System for Sealants and Adhesives. Improve your throughput with advanced dispensing technology
HFR Metering System Two-Component Hydraulic Fixed Ratio Metering System for Sealants and Adhesives Improve your throughput with advanced dispensing technology Consistent material flow Accurate, on-ratio
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Technology Innovation Leadership TRAINING CALENDAR
Technology Innovation Leadership TRAINING CALENDAR 2017-18 Courses Offered 2017-2018 Sr. No. Category Program Title Objective / Contents Period Participants Location Faculty 1 Common Module for all products
PR70. Meter, Mix and Dispense Systems
PR70 Meter, Mix and Dispense Systems PR70. Performance You Can Trust Reliable meter, mix and dispense systems Graco PR70 Meter, Mix and Dispense Systems offer superior accuracy for a broad range of applications
D6..M.. Butterfly Valves
D6..M.. Butterfly Valves Technical Databook Ver. Version 2 2.0 Belimo Asia Pacific D6..MH/MW Series Butterfly Valves Trade Selection by Belimo 2-way Butterfly Valves flanged DN50...500 For Open/Close or
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
TRANSPORT - RENUKOOT Printed Jan. 2018
TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...
Steam Valves with Rotary Actuators
Steam Valves with Rotary Actuators Technical Databook Version 3.1 Belimo Asia Pacific Steam Valve Product overview 2-way Steam Valves DN15...80 Equal-percentage characteristics for modulating control of
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
LubePro Series Pumps. For Simple, Injector-based Automatic Lubrication Systems. The Choice of Lubrication Professionals.
LubePro Series Pumps For Simple, Injector-based Automatic Lubrication Systems The Choice of Lubrication Professionals. As a hard-working professional focused on ensuring your production lines keep moving
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines
ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines Important Safety Instructions pro.bose.com Please read this installation guide carefully and save it for future reference.
at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL
at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL 29 at Spielwarenmesse International Toy Fair 2013 EXHIBITS 30 SPORTS GOODS EXPORT PROMOTION COUNCIL List of
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING
Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING INTRODUCTION ESPEE ENTERPRISES are turnkey project consultants for Lubricating blending
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Spare Parts List Series VP04 Pneumatic Remote Control Valve
Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024
Oil and Grease Pumps. Outstanding Performance and Reliability. The Industry s Most Trusted Pumps for:
Oil and Grease Pumps Outstanding Performance and Reliability The Industry s Most Trusted Pumps for: Fast Lubes and Small Garages Oil Jobbers General Service Shops Dealerships Body Shops Municipalities
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
GRIPPER CHAIN. For form, fill, and vacuum seal wrapping applications. Lower maintenance costs Increased uptime Increased productivity
GRIPPER CHAIN For form, fill, and vacuum seal wrapping applications Lower maintenance costs Increased uptime Increased productivity A formidable new force has taken hold of wrapping operations. Get a Grip
Series Progressive Divider Valves Durable and Dependable Lubrication Metering Systems
Series Progressive Divider Valves Durable and Dependable Lubrication Metering Systems Proven Quality. Leading Technology. Maximize your uptime with Graco Divider Valve Accessories Protect Your Equipment
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone. Solar PV Rooftop 140 kwp at BCP Mumbai
Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone Solar PV Rooftop 140 kwp at BCP Mumbai 22.08.2017 AUTONIC at a glance Autonic Energy Systems Pvt. Ltd. was incorporated
SD Series. Cord and Light Reels. Engineered Solutions to Help you Work Smarter and Faster. Quality Cord and Light Reels
SD Series Cord and Light Reels Engineered Solutions to Help you Work Smarter and Faster Quality Cord and Light Reels Organize your work space for a safer, more productive work environment. Make Graco your
Graco PD44. Patented Meter, Mix and Dispense Valve for Two-Component Micro Dispensing
Graco PD44 Patented Meter, Mix and Dispense Valve for Two-Component Micro Dispensing Graco PD44 Valve for Precise Micro-Dispensing 1.0cc 0.50cc 0.25cc 0.1cc 0.005cc 1/16" Dia. 1/8" Dia. 3/16" Dia. 1/4"
Setting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
Matrix Total Fluid Management System
Matrix Total Fluid Management System Automated, wireless oil dispense tracking and bulk tank monitoring P R O V E N Q U A L I T Y. L E A D I N G T E C H N O L O G Y. Save Time and Materials with Matrix
HT, LT U.G. cables & PVC insulated Al wire
HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office.
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Kare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
HOW TO SEND E-INVOICES TO CARGOTEC
HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central
CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
TYRE RANGE INDUSTRIAL & OTR AGRICULTURE
TYRE RANGE INDUSTRIAL & OTR AGRICULTURE ABOUT GALAXY BRAND Galaxy specializes in segments of the Off-Highway tyre market, Including; Skidsteer, Forestry, Industrial Forklift and Lawn and Garden, providing
European Patent Office Annual Report 2017 Country profile: Netherlands
European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703