CONTINUED FROM PART 1

Size: px
Start display at page:

Download "CONTINUED FROM PART 1"

Transcription

1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 18/12/

2 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown. Design Number Class )Degussa GmbH Bennigsenplatz 1, Dusseldorf Date of Registration 21/02/2007 Container Design Number Class )Hsing-Tzu Wang 80, Ta-Hsin St., Hsi Dist., Taichung City, Taiwan, China Date of Registration 16/11/2007 Paint Spray Gun Design Number Class )Johnson & Johnson Ltd. 30, Forjett Street, Mumbai , Maharashtra, India. Date of Registration 30/11/2007 Light Source of Camera The Patent Office Journal 18/12/

3 Design Number Class )Reckitt Benckiser (UK) Limited Bath Road, Slough, Berkshire, SL1, 3UH, United Kingdom Date of Registration 18/03/2008 Air Freshener Device /09/2007 OHIM Design Number Class )Reckitt Benckiser (UK) Limited Bath Road, Slough, Berkshire, SL1, 3UH, United Kingdom Date of Registration 18/03/ /09/2007 OHIM Air Freshener Device Design Number Class )Liberty Shoes Limited Liberty Puram, 13, Milestone, GT Karnal Road, Kutail, DT-Karnal , Haryana, India. Date of Registration 21/04/2008 Sole for Footwear The Patent Office Journal 18/12/

4 Design Number Class )Liberty Shoes Limited Liberty Puram, 13, Milestone, GT Karnal Road, Kutail, DT-Karnal , Haryana, India. Date of Registration 21/04/2008 Sole for Footwear Design Number Class )Sanyang Industry Co., Ltd. No. 184, Keng Tzu Kou, Shang Keng Village, Hsin Fong Shiang, Hsinchu, County 304, Taiwan Date of Registration 24/04/2008 Motorcycle Design Number Class )Sanford, L.P Butterfield Road, Oak Brook, Illinois 60523, USA Date of Registration 01/05/2008 Writing Instrument 29/297,153 05/11/2007 U.S.A. The Patent Office Journal 18/12/

5 Design Number Class )R.C.J. Auto Forge Pvt, Ltd. E-756, 757, Phase-VII, Focal Point, Ludhiana , Punjab, India Date of Registration 07/05/2008 Scooter Design Number Class )Bridgestone Corporation 10-1, Kyobashi 1-Chome, Chuo-Ku, Tokyo, Japan. Date of Registration 16/06/2008 Tire Design Number Class )Sony Ericsson Mobile Communications AB SE , Lund, Sweden Date of Registration 23/06/ /01/2008 OHIM Mobile Phone The Patent Office Journal 18/12/

6 Design Number Class )MR. S. HAZARA THAIAH., NO. 4/588, USMAN SAHEB PET, NELLORE , AP, INDIA. 2)MR. S. Hazara Thaiah Date of Registration 24/06/2008 Plate Design Number Class )MR. N. MARIAPPAN., NO. 137, NORTH CAR STREET, SIVAKASI , TN, INDIA. 2)MR. N. Mariappan Date of Registration 26/06/2008 Decorative Plate Design Number Class )Littelfuse, Inc. 800 East Northwest Highway, Des Plaines, Illinois 60016, USA Date of Registration 14/07/2008 Fuse Element of Blade Fuse 29/302,292 14/01/2008 U.S.A. The Patent Office Journal 18/12/

7 Design Number Class )Advance Composite Sports Pvt. Ltd. 169, Leather Complex, Jalandhar , Punjab, India Date of Registration 04/08/2008 Ball Design Number Class )Charming Apparels (P) Ltd , 1st Floor, Main Road, Chandni Chowk, Delhi , India Date of Registration 04/08/2008 Textile Fabric Design Number Class )Nilkamal Limited Survey No.- 354/2 & 354/3, Near Rakholi Bridge, Silvassa - Khanvel Road, Village Vasona, Silvassa (D & N. H.), (U. T.) India Date of Registration 07/08/2008 Cabinet The Patent Office Journal 18/12/

8 Design Number Class )Servewell Products Private Limited Opp. P. S. Plywood, Gondal Road, 8-B, National Highway, Survey No. 192, Village Veraval (Shapar), Dist. Rajkot, Gujarat, India. Date of Registration 11/08/2008 Coaster Design Number Class )Punita Trrikha S-69, Greater Kailash, Part-1, New Delhi , India Date of Registration 11/08/2008 Crystal Woven Shoe Design Number Class )La Opala RG Limited 10th Floor, "Chitrakoot", 230A, A.J.C. Bose Road, Kolkata , West Bengal, India Date of Registration 18/08/2008 Dish The Patent Office Journal 18/12/

9 Design Number Class )La Opala RG Limited 10th Floor, "Chitrakoot", 230A, A.J.C. Bose Road, Kolkata , West Bengal, India Date of Registration 18/08/2008 Dish Design Number Class )Roxtec AB Po Box 540 (Street address: Rombvagen 2) SE Karlskrona, Sweden Date of Registration 18/08/2008 Design Number Class A Frame for Pipe for Cable Penetration 1)M/s Jay Shakti Metal 4, Ankita Industrial Area. Patel chowk, Dhebar Road (South), Gujarat-India Date of Registration 25/08/2008 Handle The Patent Office Journal 18/12/

10 Design Number Class )Neil Gillan Beverley Palace Bloc B, 13 Boulevard De Belgiques, MC 9800, Monaco Date of Registration 28/08/2008 Storage Box /04/2008 OHIM Design Number Class )Neil Gillan Beverley Palace Bloc B, 13 Boulevard De Belgiques, MC 9800, Monaco Date of Registration 28/08/2008 Storage Box Design Number Class )Ravissant Pvt. Ltd , Commercial Complex, New Friends Colony, New Delhi Date of Registration 28/08/2008 Spoon The Patent Office Journal 18/12/

11 Design Number Class )Toyota Jidosha Kabushiki Kaisha 1, Toyota-cho, Toyota-shi, Aichiken, , Japan Date of Registration 28/08/2008 Automobile Design Number Class )Dasmesh Mechanical Works Rajkot Road, Malerkotla (Punjab), India Date of Registration 16/09/2008 Axial Flow Thresher For Harvester Combine Design Number Class )LA Bycycle (Thailand) Co., Ltd. 58 Moo 2, Tambol Oam-Yai, Amphur Sampran, Nakornpathom Province 73160, Thailand Date of Registration 30/09/2008 Bicycle Apparatus The Patent Office Journal 18/12/

12 Design Number Class )Genesis Colors Pvt. Ltd. 1 A-2, Rao Tula Ram Marg, New Delhi , India Date of Registration 30/09/2008 Saree Design Number Class )Genesis Colors Pvt. Ltd. 1 A-2, Rao Tula Ram Marg, New Delhi , India Date of Registration 30/09/2008 Saree Design Number Class )Larsen & Tourbo Limited L & T House, Ballard estate, Mumbai , Maharashtra, India Date of Registration 30/09/2008 Capacitor Switching Contactor The Patent Office Journal 18/12/

13 Design Number Class )Genesis Colors Pvt. Ltd. 1 A-2, Rao Tula Ram Marg, New Delhi , India Date of Registration 30/09/2008 Saree Design Number Class )Genesis Colors Pvt. Ltd. 1 A-2, Rao Tula Ram Marg, New Delhi , India Date of Registration 30/09/2008 Saree Design Number Class )Genesis Colors Pvt. Ltd. 1 A-2, Rao Tula Ram Marg, New Delhi , India Date of Registration 30/09/2008 Saree The Patent Office Journal 18/12/

14 Design Number Class )Genesis Colors Pvt. Ltd. 1 A-2, Rao Tula Ram Marg, New Delhi , India Date of Registration 30/09/2008 Saree Design Number Class )Darshana Industries Pvt. Ltd. 63, Hadapsar, Pune , Maharashtra, India. Date of Registration 01/10/2008 Flexible Mountings Design Number Class )Darshana Industries Pvt. Ltd. 63, Hadapsar, Pune , Maharashtra, India. Date of Registration 01/10/2008 Flexible Mounting The Patent Office Journal 18/12/

15 Design Number Class )Darshana Industries Pvt. Ltd. 63, Hadapsar, Pune , Maharashtra, India. Date of Registration 01/10/2008 Latch Design Number Class )Darshana Industries Pvt. Ltd. 63, Hadapsar, Pune , Maharashtra, India. Date of Registration 01/10/2008 Stay Plug Design Number Class )Shree Technocast Aji G.I.D.C., Shed No. K-1-242/5 Maltech Chowk, Rajkot, Gujarat, India Date of Registration 03/10/2008 Handle The Patent Office Journal 18/12/

16 Design Number Class )Shree Technocast Aji G.I.D.C., Shed No. K-1-242/5 Maltech Chowk, Rajkot, Gujarat, India Date of Registration 03/10/2008 Handle Design Number Class )Videojet Technologies Inc Mittel Boulevard, Wood Dale, Illinois 60191, United States of America Date of Registration 03/10/ /07/2008 China Design Number Class )Venberg SA Rue Du Rhà ne 29, 1204 Geneva, Switzerland Printer Cabinet Date of Registration 07/10/2008 Watch-Strap The Patent Office Journal 18/12/

17 Design Number Class )Piolax Inc. 51 Iwai-Cho, Hodogaya-Ku, Yokohama-Shi, Kanagawa , Japan Date of Registration 13/10/2008 Hose Clamp Design Number Class )Ajanta Limited Orpat Industrial Estate, Rajkot Highway, P.B. No. 115, morbi , State of Gujarat, India Date of Registration 13/10/2008 Switch Design Number Class )Paris Luxurious Care Pvt. Ltd. Baroda-Jambusar N. High way Road, At & Po. Dabhasa, Ta. Padra , Dist. Baroda (Gujarat), India Date of Registration 17/10/2008 Comb The Patent Office Journal 18/12/

18 Design Number Class )Charming Apparels (P) Ltd , 1st Floor, Main Road, Chandni Chowk, Delhi , India Date of Registration 10/11/2008 Dress Material Design Number Class )Charming Apparels (P) Ltd , 1st Floor, Main Road, Chandni Chowk, Delhi , India Date of Registration 10/11/2008 Dress Material Design Number Class )Charming Apparels (P) Ltd , 1st Floor, Main Road, Chandni Chowk, Delhi , India Date of Registration 10/11/2008 Textile Fabric The Patent Office Journal 18/12/

19 Design Number Class )Larsen & Tourbo Limited L & T House, Ballard estate, Mumbai , Maharashtra, India Date of Registration 27/11/2008 Single Phase Energy Meter Design Number Class )LG Systems 12 HIndustran Kohinoor Industrial Complex, LBS Marg, Vikhroli (West), Mumbai , Maharashtra, India Date of Registration 16/12/2008 Spool Design Number Class )BIBA Apparels Pvt. Ltd , "Whitehall", Kemps Corner, 143 A. K. Marg, Mumbai , Maharashtra, India Date of Registration 22/12/2008 Textile Fabric The Patent Office Journal 18/12/

20 Design Number Class )BIBA Apparels Pvt. Ltd , "Whitehall", Kemps Corner, 143 A. K. Marg, Mumbai , Maharashtra, India Date of Registration 22/12/2008 Textile Fabric Design Number Class )BIBA Apparels Pvt. Ltd , "Whitehall", Kemps Corner, 143 A. K. Marg, Mumbai , Maharashtra, India Date of Registration 22/12/2008 Textile Fabric Design Number Class )BIBA Apparels Pvt. Ltd , "Whitehall", Kemps Corner, 143 A. K. Marg, Mumbai , Maharashtra, India Date of Registration 22/12/2008 Textile Fabric The Patent Office Journal 18/12/

21 Design Number Class )BIBA Apparels Pvt. Ltd , "Whitehall", Kemps Corner, 143 A. K. Marg, Mumbai , Maharashtra, India Date of Registration 22/12/2008 Textile Fabric Design Number Class )Thermo Fisher Scientific Oy Ratastie 2, Vantaa, Finland Date of Registration 15/04/2009 Cuvette /11/2008 EUROPEAN UNION Design Number Class )M/S. Balaji Industries Virani Aghat, Plot No. 74, Opp. Aradhana Eng. Ring Road Bye Pass, Rajkot, Gujarat, India Date of Registration 16/04/2009 Slicer With Opener The Patent Office Journal 18/12/

22 Design Number Class )M/s Die-Cast Industries Plot No.209/210-C,N-Road,Aji G.I.D.C.Phase-II,Rajkot Gujarat India Date of Registration 20/04/2009 Design Number Class Handle 1)M/s Die-Cast Industries Plot No.209/210-C,N-Road,Aji G.I.D.C.Phase-II,Rajkot Gujarat India Date of Registration 20/04/2009 Design Number Class Hooks For Hanging 1)Hari Shankar Bahety 32, Sadhna Enclave, Near Malviya Nagar, New Delhi , Delhi, India Date of Registration 22/04/2009 Footwear The Patent Office Journal 18/12/

23 Design Number Class )Pearl Polymers Limited B-59, Greater Kailash, Part-I, New Delhi , India Date of Registration 30/04/2009 Bottle Design Number Class )Pearl Polymers Limited B-59, Greater Kailash, Part-I, New Delhi , India Date of Registration 30/04/2009 Bottle Design Number Class )Pearl Polymers Limited B-59, Greater Kailash, Part-I, New Delhi , India Date of Registration 30/04/2009 Bottle The Patent Office Journal 18/12/

24 Design Number Class )The Gillette Company Prudential Tower Building, Boston State of Massachusetts Date of Registration 04/05/2009 Razor Attachment 29/327,611 10/11/2008 U.S.A. Design Number Class )Perusahaan Otomobil Nasional SDN. BHD Hicom Industrial Estate, Batu 3, Shah Alam, Selangor Date of Registration 08/05/ /11/2008 Malaysia Side Mirror For A Vehicle Design Number Class )Su-Kam Power Systems Ltd. Plot No. WZ-1401/2, Nangal Raya, New Delhi , India Date of Registration 11/05/2009 Single Battery Trolly The Patent Office Journal 18/12/

25 Design Number Class )J & J Buildcon Pvt. Ltd. 151, Nariman Bhavan, Nariman Point, Mumbai , State of Maharashtra India Date of Registration 12/05/2009 Bottle Design Number Class )Sunshine Oleochem Ltd. 2nd Floor, Mahakosh House, 7/5 South Tukoganj, Indore , Madhya Pradesh, India Date of Registration 12/05/2009 Soap Design Number Class )Reckitt & Colman (Overseas) Limited Bath Road, Slough Berkshire, SL1 3UH, United Kingdom Date of Registration 13/05/2009 Dispenser /11/2008 U.K. The Patent Office Journal 18/12/

26 Design Number Class )Rakesh Kumar Kissan Battery House College Road, Barnala (Punjab) India Date of Registration 02/06/2009 Storage Battery Design Number Class )Rakesh Kumar Kissan Battery House College Road, Barnala (Punjab) India Date of Registration 02/06/2009 Design Number Class )MA Design India Private Limited C-26, Sector, 63, Noida , U.P. India Date of Registration 08/06/2009 Platter Storage Battery The Patent Office Journal 18/12/

27 Design Number Class )MA Design India Private Limited C-26, Sector, 63, Noida , U.P.India Date of Registration 10/06/2009 Decorative Article Design Number Class )MA Design India Private Limited C-26, Sector, 63, Noida , U.P.India Date of Registration 10/06/2009 Decorative Article Design Number Class )MA Design India Private Limited C-26, Sector, 63, Noida , U.P.India Date of Registration 10/06/2009 Candle Holder The Patent Office Journal 18/12/

28 Design Number Class )Toyota Jidosha Kabushiki Kaisha 1, Toyota-cho, Toyota-shi, Aichi-ken, , Japan Date of Registration 30/07/2009 Automobile Design Number Class )Pearl Polymers Limited B-59, Greater Kailash, Part-1, New Delhi , India. Date of Registration 05/08/2009 Bottle Design Number Class )Koninklijke Philips Electronics N.V. Groenewoudseweg 1, 5621 BA Eindhoven, The Netherlands Date of Registration 11/08/2009 Remote Control Device /02/2009 OHIM The Patent Office Journal 18/12/

29 Design Number Class )Ravissant Pvt. Ltd , Commercial Complex, New Friends Colony, New Delhi Date of Registration 24/08/2009 Conical Tea Pot Design Number Class )Aquamall Water Solutions Limited 143, C-4 Bommasandra Industrial Area, Off Hosur Road, Bangalore , Karnataka, India Date of Registration 03/09/2009 Water Purifier The Patent Office Journal 18/12/

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART-1

CONTINUED FROM PART-1 CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Kare Zindagi Instant Start

Kare Zindagi Instant Start Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best

More information

Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)

Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

Export Oriented Enterprises (EOE) 2nd Quarter 2018

Export Oriented Enterprises (EOE) 2nd Quarter 2018 Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

the T series high power motor protector Issue 2 14/01/03

the T series high power motor protector Issue 2 14/01/03 the T series high power motor protector Issue 2 1/01/03 T series design Designed for 12 volt and 2 volt high current switching in automotive DC applications, utilising the well proven Otter 'snap-action'

More information

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

HT, LT U.G. cables & PVC insulated Al wire

HT, LT U.G. cables & PVC insulated Al wire HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

TRANSPORT - RENUKOOT Printed Jan. 2018

TRANSPORT - RENUKOOT Printed Jan. 2018 TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...

More information

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended

More information

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines Important Safety Instructions pro.bose.com Please read this installation guide carefully and save it for future reference.

More information

replacement parts 6.1 General 6.2 Ordering

replacement parts 6.1 General 6.2 Ordering 6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Cabinet Fans & Smoke Spill Cabinet Fans

Cabinet Fans & Smoke Spill Cabinet Fans 1 Cabinet s & Smoke Spill Cabinet s Direct Drive Cabinet Single Skin - CD Series Cabinet manufactured in galvanized steel complete with inlet & outlet spigots. Squirrel cage induction motors with sealed

More information

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

FABRICATED FITTINGS I N D E X

FABRICATED FITTINGS I N D E X I N D E X FABRICATED FITTINGS Shackle Straps Type S-STRAP.. Page E-2 "U" Shackle Straps Type S-STRAP.. Page E-3 Cross Arm Braces Type X-BRACE.... Page E-4 Stay Rods and Bows Type STAY...... Page E-5 Saglinks

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Page 1 of 6 SOUTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE, GARLADINNE, DIST. ANANTAPUR (A.P.)

Page 1 of 6 SOUTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE, GARLADINNE, DIST. ANANTAPUR (A.P.) Page 1 of 6 Following 75 firms were advised to submit the Machine/Documents/Test Fee etc. followed by remainder. Due to no response, whatsoever, their applications are deleted from the Combined Seniority

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

Automated manufacturing facility admeasuring 150,000 sq.ft. area operational in 2019

Automated manufacturing facility admeasuring 150,000 sq.ft. area operational in 2019 New Product Automated manufacturing facility admeasuring 150,000 sq.ft. area operational in THE GROWTH AHEAD telecom aviation printing MARINE telecom electric panels 2000 telecom ITEMS SOLD 5449 ITEMS

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Made UNDER high pressure

Made UNDER high pressure Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL

at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL 29 at Spielwarenmesse International Toy Fair 2013 EXHIBITS 30 SPORTS GOODS EXPORT PROMOTION COUNCIL List of

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

SC05 E-04. AC Inlets Power Supply Connectors

SC05 E-04. AC Inlets Power Supply Connectors ELECT R O N I C COMPONENTS SC0 E-0 AC Inlets Power Supply Connectors Contents Contents... AC Inlets AC Inlets... AC Inlets (for Lead Wire)... Power Supply Connectors Low-Profile Type Poles... 6 Poles...

More information

Catalog. Low voltage General performance IE3 efficiency cast iron motors

Catalog. Low voltage General performance IE3 efficiency cast iron motors Catalog Low voltage General performance IE3 efficiency cast iron motors ABB Motors and Generators I Low voltage general performance IE3 efficiency motors 2 General performance IE3 efficiency cast iron

More information

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION

More information

Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS

Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

You ll find many Tsubaki products being

You ll find many Tsubaki products being You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,

More information

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiters positive action eliminates the inaccuracies of shearing

More information

SPnorm & SPbloc Self Priming Centrifugal Pumps

SPnorm & SPbloc Self Priming Centrifugal Pumps SPnorm & SPbloc Self Priming Centrifugal Pumps SPbloc SPbloc SPnorm SPnorm & SPbloc Self Priming Centrifugal Pumps SPnorm & SPbloc - Self Priming Centrifugal Pumps Design SPnorm: Horizontal self priming

More information

Manual changeover switches & Automatic transfer switches

Manual changeover switches & Automatic transfer switches Manual changeover switches & Automatic transfer switches Manual ChangeoverSwitches 63A to 1600A Advantagesforyou: Doublebreakperpolefacilitalingsuitabilityforisolationasper IEC60947-3 Safeisolationat0positionformaintenance

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

[To be published in the Gazette of India, Extraordinary, Part-II, Section 3, Sub-section (ii)]

[To be published in the Gazette of India, Extraordinary, Part-II, Section 3, Sub-section (ii)] [To be published in the Gazette of India, Extraordinary, Part-II, Section 3, Sub-section (ii)] Government of India Ministry of Finance Department of Revenue Notification No. 53/2016- Customs (N.T.), dated

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.

Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series. MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and

More information

(a) Name of Company : SHREE RANGAVADHUT ENGINEERS

(a) Name of Company : SHREE RANGAVADHUT ENGINEERS SHREE RANGAVADHUT ENGINEERS No. 8, 1 st Floor, Dhamanwala Service Complex, Opp. S.B.I., G.I.D.C., PANDESARA, Surat-394 221. Tele : 0261-2891016 e-mail : info@srae.co.in / shreerangavadhut2003@yahoo.co.in

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

ELECON. Range of Products for Plastic Industry. w w w. e l e c o n. c o m. Catalogue No.: 217/EECL/PROFILE/01/15

ELECON. Range of Products for Plastic Industry. w w w. e l e c o n. c o m. Catalogue No.: 217/EECL/PROFILE/01/15 ELECON Range of Products for Plastic Industry Catalogue No.: 217/EECL/PROFILE/01/15 w w w. e l e c o n. c o m Introduction Elecon, India s largest manufacturer of Industrial Gears Founded in 1951, over

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

News Letter Volume 1

News Letter Volume 1 News Letter 2017 Volume 1 30 Ÿ CONSISTENT QUALITY Ÿ SUPERIOR TECHNOLOGY Ÿ ENERGY EFFICIENT PRODUCTS Ÿ CUSTOMER SATISFACTION PRODUCT RANGE Ÿ FAN & MOTOR RUN CAPACITORS Ÿ AIR CONDITIONING CAPACITOR Ÿ SUBMERSIBLE

More information

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps

Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.

More information

Installation Instructions

Installation Instructions c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each

More information

SIAM Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy

SIAM Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy 10 th -12 th December 2001 Bangkok Indian Scenario Two types of I&M programmes

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

ESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC

ESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC 6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

SLN08 B-01. DC Solenoids

SLN08 B-01. DC Solenoids ELECT R O N IC COMPO NENTS SLN08 B-01 DC Solenoids Contents & Features Index & DC Solenoids Features... 1 Solenoid Specifications... 2 Product List... 3 How to Select Solenoids... 4-5 DC Solenoids (PM

More information

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com

More information

ARAI/TA(4G)/SMS/D680/ Dated 28 Jan 2010

ARAI/TA(4G)/SMS/D680/ Dated 28 Jan 2010 CERTIFICATE FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES M/s SMS Autoline Equipments Pvt. Ltd. Plot No.AP215, 6 th Street I Block, Vallalar Colony, Anna Nagar (West) Chennai 600 040 Cert Annex Drg

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:

More information

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant

More information

Installation Instructions

Installation Instructions c Installation Instructions Toyota Three Function Internal Reeving Hydraulic Supply Kits This sheet describes the installation of Cascade Three Function Internal Reeving Hydraulic Supply Kits for Toyota

More information

AKM Gearmotors. World Class Performance with no assembly required.

AKM Gearmotors. World Class Performance with no assembly required. AKM Gearmotors World Class Performance with no assembly required. AKM Brushless Servomotors The Kollmorgen AKM servomotors provide an unprecedented choice and flexibility from a wide range of standard

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY

More information