CONTINUED FROM PART- 1
|
|
|
- Susanna Singleton
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 24/09/
2 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown Design Number Class )JATIN VASANT THAKKAR., L-3/4, EDEN HALL, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA. Date of Registration 05/11/2007 Tooth Brush Design Number Class )DEVENDER KUMAR GUPTA., 99 KAPIL VIHAR, PITAMPURA, DELHI, INDIA. Date of Registration 05/05/2008 Container Design Number Class )SRI SHYAMJI RASTOGI., CK-60/28, KARNA GHANTA, VARANASI, UP, INDIA. Date of Registration 14/05/2008 Undergarments The Patent Office Journal 24/09/
3 Design Number Class )ARUSH BALUJA., 15/78, SUBHASH NAGAR, NEWDELHI , INDIA. Date of Registration 14/05/2008 Coffee Set Design Number Class )Tata Motors Limited., Bombay House, 24 Homi Mody Street, Hutatma Chowk, Mumbai , Maharashtra, India. Date of Registration 16/03/2009 Multi-Edge Metal Cutting Composite Insert Design Number Class )Tata Motors Limited., Bombay House, 24 Homi Mody Street, Hutatma Chowk, Mumbai , Maharashtra, India. Date of Registration 16/03/2009 Multi-Edge Metal Cutting Composite Insert The Patent Office Journal 24/09/
4 Design Number Class )Crompton Greaves Limited., 6th Floor, C.G. House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 17/03/2009 Design Number Class Alternator 1)Weir Minerals Australia Ltd., 1 Marden Street, Artarmon, New South Wales 2064, Australia. Date of Registration 20/03/2009 Mine Dewatering Apparatus 14528/ /09/2008 Australia Design Number Class )Crompton Greaves Limited., 6th Floor, C.G. House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 23/03/2009 Ceiling Fan The Patent Office Journal 24/09/
5 Design Number Class )JAI SHRI KANT WADHWA, PLOT NO. C-52, INDUSTRIAL FOCAL POINT, NABHA, DISTT. PATIALA, PUNJAB, INDIA. Date of Registration 23/01/2008 Jar Design Number Class )Bridgestone Corporation 10-1, Kyobashi 1-chome, Chuo-ku, Tokyo , Japan Date of Registration 26/11/2008 Tire Tread Design Number Class )Nokia Corporation Keilalahdentie, 4, Fin-02150, Espoo, Finland. Date of Registration 01/12/2008 Handset 29/324, /09/2008 U.S.A. The Patent Office Journal 24/09/
6 Design Number Class )Innovative Office Products, Inc., 100 Keubler Road, Easton, Pennsylvania 18040, Usa. Date of Registration 08/10/2007 Stand 29/286,166 25/04/2007 U.S.A. Design Number Class )HSIL Limited, Bahadurgarh , Dist. Jhajjar, Haryana, India. Date of Registration 02/02/2009 Wall Mounted European Water Closet Design Number Class )Ge India Industrial Pvt. Ltd., Plot No. 42/1, & 45/14, Electronic City Phase 11, Bangalore , Karnataka, India. Date of Registration 02/02/2009 Well-Glass Luminaire The Patent Office Journal 24/09/
7 Design Number Class )Crompton Greaves Limited., 6th Floor, C.g. House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 09/02/2009 Solar Lantern Design Number Class )Nokia Corporation Keilalahdentie 4, Fin Espoo, Finland. Date of Registration 13/02/2009 Wireless Receiver 29/332,270 12/02/2009 U.S.A. Design Number Class )United States Gypsum Company 550 West Adams Street Chicago, Illinois United States of America Date of Registration 22/08/2008 Inside Corner Gate of a Reservoir for use in Applying joint Compound to Paper Beads 29/304, /02/2008 U.S.A. The Patent Office Journal 24/09/
8 Design Number Class )United States Gypsum Company 550 West Adams Street Chicago, Illinois United States of America Date of Registration 22/08/2008 Outside Corner Gate of a Reservoir for Use in Applying Joint Compound to Paper Beads 29/304,090 25/02/2008 U.S.A. Design Number Class )Crompton Greaves Limited., 6th Floor, C.G. House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 23/03/2009 Ceiling Fan Design Number Class )Fischerwerke Gmbh & Co. Kg., Weinhalde 14-18, Waldachtal, Germany. Date of Registration 25/03/2009 Screw /09/2008 OHIM The Patent Office Journal 24/09/
9 Design Number Class )Crompton Greaves Limited., 6th Floor, C.G. House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 25/03/2009 Motor Design Number Class )S. ILANGOVAN AND PROF. (DR.) S.K.NAYAK., CIPET, TVK INDUSTRIAL AREA, GUINDY, CHENNAI , TN, INDIA. Date of Registration 25/03/2009 Wash Basin Design Number Class )S. ILANGOVAN AND PROF. (DR.) S.K.NAYAK., CIPET, TVK INDUSTRIAL AREA, GUINDY, CHENNAI , TN, INDIA. Date of Registration 25/03/2009 Cosmetic Box The Patent Office Journal 24/09/
10 Design Number Class )Hindustan Unilever Limited., Hindustan Lever House Backbay Reclamation, Mumbai , Maharashtra, India. Date of Registration 26/03/2009 Soap Bar Design Number Class )Michelin Recherche Et Technique S.A., And Societe De Technologie Michelin., Route Louis-Braille 10, Ch-1763, Granges-Paccot, Switzerland. And 23 Rue Breschet, Fr , Clermont-Ferrand, France. Date of Registration 27/03/2009 Tyre 29/326,043 10/10/2008 U.S.A. Design Number Class )Michelin Recherche Et Technique S.A., Route Louis-Braille 10, Ch-1763, Granges-Paccot, Switzerland. Date of Registration 27/03/2009 Tyre 15139/ /10/2008 Australia The Patent Office Journal 24/09/
11 Design Number Class )MR. LALIT HIRANANDANI D-23 INDRASUKH SOCIETY, FOUR BUNGALOWS, ANDHERI (WEST), MUMBAI , MAHARASHTRA, INDIA. Date of Registration 30/07/2007 Multifunctional Seating Called As Ybut Design Number Class )AVINASIAPPAN SUDARSAN., # G-9, VYASARPADI INDUSTRIAL ESTATE, VYASARPADI, CHENNAI , TAMIL NADU, INDIA. Date of Registration 17/07/2008 Pressure Cooker Design Number Class )Littelfuse, Inc., 800 East Northwest Highway, Des Plaines, Illinois 60016, U.S.A. Date of Registration 23/10/2008 Vehicle Electrical Center Cover 29/317,165 23/04/2008 U.S.A. The Patent Office Journal 24/09/
12 Design Number Class )S. B. International , Imperial Towers, C-Block Community Center, Naraina Vihar, New Delhi , India Date of Registration 23/10/2008 Mixing Spatula Design Number Class )De Beers Centenary AG., Alpenstrasse 5, 6000 Luzern 6, Switzerland Date of Registration 07/11/2008 Bracelet /07/2008 OHIM Design Number Class )Charming Apparels (P) Ltd., , 1st Floor, Main Road, Chandni Chowk, Delhi , India. Date of Registration 16/02/2009 Textile Fabric The Patent Office Journal 24/09/
13 Design Number Class )Charming Apparels (P) Ltd., , 1st Floor, Main Road, Chandni Chowk, Delhi , India. Date of Registration 16/02/2009 Textile Fabric Design Number Class )Charming Apparels (P) Ltd., , 1st Floor, Main Road, Chandni Chowk, Delhi , India. Date of Registration 16/02/2009 Textile Fabric Design Number Class )Hindustan Sanitaryware & Industries Limited., Bahadurgarh , Haryana, India. Date of Registration 16/02/2009 Cistern The Patent Office Journal 24/09/
14 Design Number Class )MR. CHINNAPPA GOUNDER THANGARAJ, MRS. CHINNAPPA GOUNDER ARUKKANI AMMAL & MRS. THANGARAJ HARIPRIYA., SF 150/B, SANJAY NAGAR, ERODE MAIN ROAD, KARUR , TN, INDIA. Date of Registration 18/02/2009 SEAT Cushion Design Number Class )MR. CHINNAPPA GOUNDER THANGARAJ, MRS. CHINNAPPA GOUNDER ARUKKANI AMMAL & MRS. THANGARAJ HARIPRIYA., SF 150/B, SANJAY NAGAR, ERODE MAIN ROAD, KARUR , TN, INDIA. Date of Registration 18/02/2009 Seat Cushion Design Number Class )Liberty Shoes Limited., Liberty Puram, 13, Milestone, Gt Karnal Road, Kutail, Dt-Karnal , Haryana, India. Date of Registration 20/02/2009 Sole For Footwear The Patent Office Journal 24/09/
15 Design Number Class )SHABEER ALI PATHOOR PATHOOR HOUSE, KODINHI P.O. TIRURANGADI (VIA), MALAPPURAM DISTRICT, KERALA, PIN , INDIA. Date of Registration 06/07/2007 Footwear Design Number Class )SANJAY SHAH., 13, ARYAVARTA, NARAYAN DABHOLKAR ROAD, MUMBAI , INDIA. Date of Registration 28/11/2007 Gemstone Design Number Class )SANJAY SHAH., 13, ARYAVARTA, NARAYAN DABHOLKAR ROAD, MUMBAI , INDIA. Date of Registration 28/11/2007 Gemstone The Patent Office Journal 24/09/
16 Design Number Class )BHARAT BHUSHAN GUPTA., 21/4, SHAKTI NAGAR, DELHI , INDIA. Date of Registration 17/12/2007 Portable Sewing Machine Design Number Class )Honeywell International Inc. 101 Columbia Road, P.O. Box 2245, Morristown, New Jersy , U.S.A. Date of Registration 21/11/2007 All Terrain Vehicles Right-Hand Handle Bar Controller 29/293,433 21/11/2007 U.S.A. Design Number Class )Honeywell International Inc. 101 Columbia Road, P.O. Box 2245, Morristown, New Jersy , U.S.A. Date of Registration 21/05/2008 All Terrain Vehicles Left-Hand Handle Bar Controller 29/293,434 21/11/2007 U.S.A. The Patent Office Journal 24/09/
17 Design Number Class )Cholayil Private Limited., Cholayil, No. 8, J-Block, 6th Avenue, Anna Nagar, Chennai , Tn, India. Date of Registration 23/05/2008 Body Scrubber Design Number Class )Festo Ag & Co.Kg Ruiter Strasse 82, D Esslingen, Germany Date of Registration 03/10/2008 Detector For Detecting The Angular Position Of A Rotatable Shaft /04/2008 OHIM Design Number Class )MOON SI, YEON., SHINBANPO 15TH APT., 12 BANPO-DONG, SEOCHO-GU, SEOUL, JAPAN. Date of Registration 01/01/2009 Keys of Electric Keyboard The Patent Office Journal 24/09/
18 Design Number Class )SHRI MUNIT KUMAR & SHRI DEVINDER KUMAR., A-98/1, WAZIRPUR INDUSTRIAL AREA, DELHI , INDIA. Date of Registration 07/01/2009 BOWL FOR DOG FEEDING Design Number Class )Euro India, 5/500, Shakti Nagar, Gular Road, Aligarh , Up, India. Date of Registration 12/01/2009 Pull Handle Design Number Class )MYLSAMY RANGA RAMANUJAM., COATS, NO.-13/24, SITRA KALAPATTI ROAD, CIVIL AERODROME POST, COIMBATORE , TAMAILNADU, INDIA. Date of Registration 13/01/2009 Hampers The Patent Office Journal 24/09/
19 Design Number Class )PROF. (DR.) S.K.NAYAK & N. DURAI., CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY, TVK INDUSTRIAL AREA, GUINDY, CHENNAI , TAMILNADU, INDIA. Date of Registration 15/01/2009 Radiator Cap Design Number Class )Su-Kam Power Systems Ltd., Plot No. Wz-1401/2, Nangal Raya, New Delhi , India. Date of Registration 20/01/2009 Battery Tray Design Number Class )CROMPTOM GREAVES LIMITED 6th Floor, CG House, Dr. Annie Besant Road, Worli, Date of Registration 30/03/2007 METAL CASTING FOR CIRCUIT BREAKER The Patent Office Journal 24/09/
20 Design Number Class )KAIZAR MITHAIWALA AND RADHIKA NAIK., NO. 6, SEA VIEW TERRACE, WODEHOUSE ROAD, COLABA, MUMBAI , INDIA, Date of Registration 03/03/2008 Garment Design Number Class )HAKIM KHURSHID., DEVLILA APARTMENTS, SHOP NO. 8, FATEMA NAGAR, PUNE , MAHARASHTRA, INDIA. Date of Registration 11/03/2008 Profile Design Number Class )Preciosa, a.s., Opletalova 3197, Jablonec nad Nisou, Czech Republic Date of Registration 15/12/2008 Gemstone EM /06/2008 OHIM The Patent Office Journal 24/09/
21 Design Number Class )Preciosa, a.s., Opletalova 3197, Jablonec nad Nisou, Czech Republic Date of Registration 15/12/2008 Gemstone EM /06/2008 OHIM Design Number Class )Pnl Metalware Pvt Ltd., G-1843, Kishan Gate Road, G.I.D.C. Metoda (Lodhika), Taluka: Lodhika, Dist.: Rajkot Gujarat, India Date of Registration 22/12/2008 Door Handle Design Number Class )PUNITA TRRIKHA S-69, GREATER KAILASH, PART-1, NEW DELHI , INDIA. Date of Registration 20/08/2007 Cuff Link The Patent Office Journal 24/09/
22 Design Number Class )Dolphin Hardware Industries Plot No. C-1-B, 236/5, Aji G.I.D.C., Near Cargo Motor s, Rajkot , Gujarat, India Date of Registration 13/08/2008 Knob The Patent Office Journal 24/09/
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone. Solar PV Rooftop 140 kwp at BCP Mumbai
Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone Solar PV Rooftop 140 kwp at BCP Mumbai 22.08.2017 AUTONIC at a glance Autonic Energy Systems Pvt. Ltd. was incorporated
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central
Maximum retail price list. For SKF domestic industrial products Deep groove ball bearings and taper roller bearings
Maximum retail price list For SKF domestic industrial products Deep groove ball bearings and taper roller bearings Effective from 1 st May, 2017 Deep groove ball bearings 16007 282 16007/C3 282 16008 386
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
Kare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
Manual changeover switches & Automatic transfer switches
Manual changeover switches & Automatic transfer switches Manual ChangeoverSwitches 63A to 1600A Advantagesforyou: Doublebreakperpolefacilitalingsuitabilityforisolationasper IEC60947-3 Safeisolationat0positionformaintenance
Transformation through Engineering and Innovation
Transformation through Engineering and Innovation Suspension Systems HYDRAULIC DAMPERS ESCORTS LIMITED is manufacturing heavy duty Hydraulic dampers for Indian railways since 1962. Escorts is the primary
HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
High Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
HYDRAULIC DRY DISC BRAKES PARTS CATALOG
HYDRAULIC DRY DISC BRAKES PARTS CATALOG INTRODUCTION AxleTech International is a global manufacturer, and supplier of axles, axle components, planetary axles, brakes, and aftermarket parts for commercial
Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort
Precision Motors for Infusion Systems Optimized performance for reliability, versatility and patient comfort Motor designs validated by decades of success in the field. For over 40 years, Portescap has
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Docket No 4899 Date/Time 20/03/2013
Welcome Dr. Vasani Rupesh PATENT OFFICE INTELLECTUAL PROPERTY BUILDING S.M.Road,Antop Hill, Mumbai-400037 Tel No. (091)(022) 241377010,24141026 Fax No. 022 24130387 E-mail: mumbai-patent@nic.in Web Site:
Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
HT, LT U.G. cables & PVC insulated Al wire
HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837
10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
Technology Innovation Leadership TRAINING CALENDAR
Technology Innovation Leadership TRAINING CALENDAR 2017-18 Courses Offered 2017-2018 Sr. No. Category Program Title Objective / Contents Period Participants Location Faculty 1 Common Module for all products
Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING
Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING INTRODUCTION ESPEE ENTERPRISES are turnkey project consultants for Lubricating blending
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
N60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
+91-8048764444 Indian Entrance Automation http://www.indianentranceautomation.com/ We are manufacturing & supplying a range of automatic entrance systems & solution like Automatic Entrance Doors, Automatic
Maximum retail price list, For SKF domestic industrial products
Maximum retail price list, 2013 For SKF domestic industrial products Effective from 1 st November, 2013 SKF Ahmedabad Factory: World class industrial bearings manufactured locally The legacy of Knowledge
SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES
SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES 1 TABLE OF CONTENTS 4 PUMP SERIES PAGE SVM30...4 SVM55...6 SVM70...8 SVM100...10 1.32 1.98 2.64 3.30 3.96 4.62 5.28 5.94 6.61 7.27 EN ISO 9906 SUBMERSIBLE PUMPS
Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines
Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office.
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
LIST OF MOUs SIGNED BY GOVERNMENT OF TAMIL NADU
LIST OF MOUs SIGNED BY GOVERNMENT OF TAMIL NADU S.No Date Company Place Manufacturing Products 1. 07.06.2006 M/s. Motorola Sriperumputhur (U.S.A) SIPCOT Communication Equipments, Cell Phones & Accessories
YASKAWA AC DRIVES. Application Solution. Extruder. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Extruder YASKAWA AC Drive YASKAWA Matrix Converter For Extruder YASKAWA provides the answers to your extruder needs. YASKAWA ELECTRIC always stands in the shoes of
10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
Cooling systems for rolling stock
Cooling systems for rolling stock Alstom Transport / Capa Pictures-F.Clément AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide
CHAPTER 20 MOTOR VEHICLES
CHAPTER 20 MOTOR VEHICLES 20.1 In India the first car ran on roads in 1897. Prior to independence in the 1940s India had no automobile industry to speak of. Cars were brought into the country in a knocked
Cooling systems for rolling stock
Cooling systems for rolling stock Siemens AG, München/ Berlin AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide systems for
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.
NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has
Population and decadal change by residence -India: 2011 (Persons)
Population and decadal change by residence -India: 2011 (Persons) State/ UT Code India/ Population 2011 State/Union Territory # Percentage decadal change 2001-2011 Total Rural Urban Total Rural Urban 1
ARAI/TA(4G)/SMS/D680/ Dated 28 Jan 2010
CERTIFICATE FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES M/s SMS Autoline Equipments Pvt. Ltd. Plot No.AP215, 6 th Street I Block, Vallalar Colony, Anna Nagar (West) Chennai 600 040 Cert Annex Drg
Shower Panel - Rain Shower - EWC - Wash Basin
www.jaaz.in Shower Panel - Rain Shower - EWC - Wash Basin Index S About Jaaz... 3 MULTIFUNCTION SHOWER S S S S S MF-DWMB MF-WCM MF-WF MFS-WF2M MFS-4M... 4... 5... 6... 7... 7 WALLMOUNT SHOWER S ADWMS-300
Spectronic SP Air Circuit Breaker. Protecting people, property & productivity
Protecting people, property & productivity Circuit Breakers 800 to 2500A Series SP Rated short circuit breaking capacity : lcs 50 / 55KA ( 415V) Complete range Fixed with manual control 3 or 4 Poles The
PRODUCT CATALOG ADDENDUM FHOTON HR SOLARPAK. franklinwater.com
PRODUCT CATALOG ADDENDUM FHOTON HR SOLARPAK franklinwater.com MOVs for lightning protection Operating status indicated by multi-color LED Output motor phase connections for three-phase induction motor
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published