CONTINUED FROM PART- 1

Size: px
Start display at page:

Download "CONTINUED FROM PART- 1"

Transcription

1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 26/10/

2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 26/10/

3 CANCELLATION PROCEEDINGS under Section 19 of the Designs Act, 2000 The Asstt. Controller of Patents & Designs passed an order on 19/10/2012 to dismiss the petition filed by M/s. Bonjour International for cancellation of the registration of registered Design No dated 27/10/1997 under Class 3 titled as Flask in the name of Eagle Flask Industries Limited. The Asstt. Controller of Patents & Designs passed an order on 19/10/2012 to dismiss the petition filed by M/s. Bonjour International for cancellation of the registration of registered Design No dated 27/10/1997 under Class 1 titled as Flask in the name of Eagle Flask Industries Limited. The Patent Office Journal 26/10/

4 OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN NUMBER CLASS )CHINTAN PANKAJ KOTHARI 1A, ANKUR APARTMENT, 51 JUHU LANE, ANDHERI (WEST), MUMBAI , MAHARASHTRA, INDIA 13/04/2012 TELEPHONE JACK NA DESIGN NUMBER CLASS )LG HAUSYS, LTD. 20, YEOUIDO-DONG, YEONGDEUNGPO-GU, SEOUL , REPUBLIC OF KOREA 25/01/2012 SHEET FOR VEHICLE SEATS KR /08/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )MAX CO. LTD. 6-6, NIHONBASHI HAKOZAKI-CHO, CHUO-KU, TOKYO , JAPAN 17/02/2012 STAPLER /08/2011 JAPAN The Patent Office Journal 26/10/

5 DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 PUMP NA DESIGN NUMBER CLASS )AUDI AG INGOLSTADT, GERMANY 24/02/2012 CAR /09/2011 OHIM DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR REFREIGERATORS /06/2011 JAPAN The Patent Office Journal 26/10/

6 DESIGN NUMBER CLASS )SMC KABUSHIKI KAISHA AKIHABARA UDX 15F, , SOTOKANDA, CHIYODA-KU, TOKYO , JAPAN 17/01/2012 FLUID PRESSURE CYLINDER /07/2011 JAPAN DESIGN NUMBER CLASS )JOSEPH VOGELE AG JOSEPH-VOGELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 SIGNAL LIGHT FOR VEHICLE /08/2011 EUROPEAN UNION DESIGN NUMBER CLASS )M. B. EXPORTS LIMITED ADJ. KAIND CANAL BRIDGE, VILLAGE-KAIND, P.O. GHWADDI, NEAR DEHLON, LUDHIANA-MALERKOTLA ROAD, SH-11, LUDHIANA , PUNJAB, INDIA 12/04/2012 NA COUPLING FOR SUPPLY OF LIQUID SUBSTANCE The Patent Office Journal 26/10/

7 DESIGN NUMBER CLASS )THE PROCTER & GAMBLE COMPANY ONE PROCTER & GAMBLE PLAZA CINCINNATI, OHIO-45202, UNITED STATES OF AMERICA 02/05/2011 CONTAINER 29/378, /11/2010 U.S.A. DESIGN NUMBER CLASS )JOSEPH VOGELE AG JOSEPH-VOGELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 ROAD CONSTRUCTION MACHINE /08/2011 EUROPEAN UNION DESIGN NUMBER CLASS )KALEESUWARI REFINERY PRIVATE LIMITED, A COMPANY INCORPORATED UNDER THE COMPANIES ACT, 1956, HAVING ADDRESS AT, #53, RAJASEKARAN STREET, MYLAPORE, CHENNAI , TAMIL NADU, INDIA 07/05/2012 BOTTLE NA The Patent Office Journal 26/10/

8 DESIGN NUMBER CLASS )SATA GMBH & CO. KG DOMERTALSTRASSE 20, KORNWESTHEIM, GERMANY 13/02/2012 PROTECTIVE SUIT (SET) /08/2011 GERMANY DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 LIGHTING FIXTURE NA DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 PUMP NA The Patent Office Journal 26/10/

9 DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES LLC SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN, UNITED STATES OF AMERICA /02/2012 VEHICLE SWING DOOR HANDLE /08/2011 CHINA DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES LLC SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN, UNITED STATES OF AMERICA /02/2012 VEHICLE ROOF RACK /08/2011 CHINA DESIGN NUMBER CLASS )THE PROCTER & GAMBLE COMPANY ONE PROCTER & GAMBLE PLAZA, CINCINNATI, OHIO-45202, UNITED STATES OF AMERICA 30/09/2011 BOX /04/2011 WIPO The Patent Office Journal 26/10/

10 DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR AUTOMOBILE PLATE COMPONENTS /06/2011 JAPAN DESIGN NUMBER CLASS )DM & CO., CUDDALORE MAIN ROAD, UTHANGAL (P.O.), VIRDHACHALAM-TK, CUDDALORE TAMIL NADU, INDIA 19/08/2011 NA DRUG ORGANIZER DESIGN NUMBER CLASS )JOSEPH VOGELE AG JOSEPH-VOGELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 ROOF FOR VEHICLE /08/2011 EUROPEAN UNION The Patent Office Journal 26/10/

11 DESIGN NUMBER CLASS )EXPORTS INTERNATIONAL CORPORATION MANJU NAGAR, OPP. PRABHAT MARKET, RAMPUR ROAD, MORADABAD Â , U. P., INDIA 31/01/2012 CANDLE STAND NA DESIGN NUMBER CLASS )KOSAN KOZMETIK SAN. VE TIC A.S., GEBZE ORGANIZE SANAYI BOLGESI, IHSAN DEDE CADDESI NO:133, GEBZE KOCAELI, TURKEY 20/09/2011 BOTTLE NA DESIGN NUMBER CLASS )VENBERG SA., RUE DU RHONE 29, 1204 GENEVA, SWITZERLAND 23/09/2011 JEWEL NÂ DM/ /03/2011 WIPO The Patent Office Journal 26/10/

12 DESIGN NUMBER CLASS )HONDA MOTOR CO., LTD., 1-1, MINAMI-AOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN 22/12/2011 AUTOMOBILE /06/2011 JAPAN DESIGN NUMBER CLASS )M. B. EXPORTS LIMITED ADJ. KAIND CANAL BRIDGE, VILLAGE-KAIND, P.O. GHWADDI, NEAR DEHLON, LUDHIANA-MALERKOTLA ROAD, SH-11, LUDHIANA , PUNJAB, INDIA 12/04/2012 NA COUPLING FOR SUPPLY OF LIQUID SUBSTANCE DESIGN NUMBER CLASS )MICHELIN RECHERCHE ET TECHNIQUE S. A. ROUTE LOUIS-BRAILLE 10 ET 12, CH-1763 GRANGES- PACCOT, SWITZERLAND 2)SOCIETE DE TECHNOLOGIE MICHELIN 28/02/2012 TIRE TREAD 29/402, /09/2011 U.S.A. The Patent Office Journal 26/10/

13 DESIGN NUMBER CLASS )ASTRAZENECA AB SE SODERTALJE, SWEDEN 29/02/2012 INHALER /09/2011 OHIM DESIGN NUMBER CLASS )AUTOMATIC TECHNOLOGY (AUSTRALIA) PTY LTD; 6-8 FIVEWAYS BOULEVARD, KEYSBOROUGH, VICTORIA 3173, AUSTRALIA 01/03/2011 DOOR OPERATING UNIT 13792/ /09/2010 AUSTRALIA DESIGN NUMBER CLASS )MONTRES TUDOR S.A., 3 RUE FRANCOIS-DUSSAUD, GENEVA, SWITZERLAND 15/09/2011 WATCH /03/2011 SWITZERLAND The Patent Office Journal 26/10/

14 DESIGN NUMBER CLASS )S. P. M. FLOW CONTROL, INC WYATT DRIVE, FORT WORTH TEXAS 76108, USA 17/02/2012 FLUID END 29/399, /08/2011 U.S.A. DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 23/02/2012 NA AUTOMOBILE DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR REFREIGERATORS /06/2011 JAPAN The Patent Office Journal 26/10/

15 DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 30/03/2012 MOTOR NA DESIGN NUMBER CLASS )EXPORTS INTERNATIONAL CORPORATION MANJU NAGAR, OPP. PRABHAT MARKET, RAMPUR ROAD, MORADABAD Â , U. P., INDIA 31/01/2012 NA BOWL DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS 21/12/2011 BABY BOTTLE /06/2011 OHIM The Patent Office Journal 26/10/

16 DESIGN NUMBER CLASS )M. B. EXPORTS LIMITED ADJ. KAIND CANAL BRIDGE, VILLAGE-KAIND, P.O. GHWADDI, NEAR DEHLON, LUDHIANA-MALERKOTLA ROAD, SH-11, LUDHIANA , PUNJAB, INDIA 29/03/2012 NA DOUBLE PISTON PUMP DESIGN NUMBER CLASS )S. V. ENTERPRISES F-39 & 40, 1ST FLOOR, L.S.C. MANSAROVER GARDEN, DELHI , INDIA 26/04/2012 CAMERA NA DESIGN NUMBER CLASS )JEIL INDUSTRY CO., LTD 309-2, SANMAK-DONG, YANGSAN-SI, GYEONGSANGNAM-DO, , KOREA 15/02/2010 CONTAINER BAG /08/2009 TAIWAN The Patent Office Journal 26/10/

17 DESIGN NUMBER CLASS )MA DESIGN INDIA PRIVATE LIMITED A-41, SECTOR - 80, PHASE - II, NOIDA , U.P., INDIA 27/01/2012 BOWL NA DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 MIXER GRINDER NA DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES LLC SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN, UNITED STATES OF AMERICA /02/2012 VEHICLE WHEEL COVER /08/2011 CHINA The Patent Office Journal 26/10/

18 DESIGN NUMBER CLASS )AUDI AG INGOLSTADT, GERMANY 24/02/2012 CAR /09/2011 OHIM DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR FRAMES OF BUILDINGS /06/2011 JAPAN DESIGN NUMBER CLASS )S.C. JOHNSON & SON, INC HOWE STREET, RACINE, WISCONSIN , UNITED STATES OF AMERICA 13/01/2012 OVERCAP WITH CONTAINER 29/397, /07/2011 U.S.A. The Patent Office Journal 26/10/

19 DESIGN NUMBER CLASS )SOUTHERN BATTERIES PVT. LTD. 328, BOMMASANDRA JIGANI LINK ROAD, ANEKAL TALUK, BANGALORE , KARNATAKA, INDIA 02/04/2012 BATTERY NA DESIGN NUMBER CLASS )FEMASYS INC RESEARCH COURT, SUITE 100, SUWANEE, GEORGIA 30024, U.S.A. 03/02/2012 DEVICE FOR MIXING FLUIDS 29/398, /08/2011 U.S.A. DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES LLC SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN, UNITED STATES OF AMERICA /02/2012 VEHICLE SWING DOOR HANDLE /08/2011 CHINA The Patent Office Journal 26/10/

20 DESIGN NUMBER CLASS )ASTRAZENECA AB SE SODERTALJE, SWEDEN 29/02/2012 INHALLER /09/2011 OHIM DESIGN NUMBER CLASS )LG HAUSYS, LTD. 20, YEOUIDO-DONG, YEONGDEUNGPO-GU, SEOUL , REPUBLIC OF KOREA 25/01/2012 SHEET FOR VEHICLE SEATS KR /08/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )MA DESIGN INDIA PRIVATE LIMITED A-41, SECTOR - 80, PHASE - II, NOIDA , U.P., INDIA 27/01/2012 WALL ORNAMENT NA The Patent Office Journal 26/10/

21 DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WALLS AND CEILING /06/2011 JAPAN DESIGN NUMBER CLASS )SPAL AUTOMOTIVE S.R.L VIA PER CARPI, 26/B CORREGGIO (REGGIO EMILIA) ITALY 14/05/2010 BLADE OF AXIAL FANS /11/2009 OHIM DESIGN NUMBER CLASS )SHILENDER GARG 3 NEMI SAGAR COLONY, QUEENS ROAD, VAISHALI NAGAR, JAIPUR Â 30021, INDIA 15/02/2012 CARPET NA The Patent Office Journal 26/10/

22 DESIGN NUMBER CLASS )JOSEPH VOGELE AG JOSEPH-VOGELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 ROOF FOR VEHICLE /08/2011 EUROPEAN UNION DESIGN NUMBER CLASS )SIEMENS AKTIENGESELLSCHAFT WITTELSBACHERPLATZ 2, MUNCHEN, GERMANY 20/12/2011 BELL COVER FOR SWITCHGEAR EU /08/2011 OHIM DESIGN NUMBER CLASS )IVECO S.P.A., VIA PUGLIA 35, TORINO, ITALY 24/11/2011 VEHICLE /05/2011 OHIM The Patent Office Journal 26/10/

23 DESIGN NUMBER CLASS )MASCO CORPORATION OF INDIANA 55 EAST 111TH STREET, INDIANAPOLIS, INDIANA /01/2012 WALL SHELF 29/400, /08/2011 U.S.A. DESIGN NUMBER CLASS )MA DESIGN INDIA PRIVATE LIMITED A-41, SECTOR - 80, PHASE - II, NOIDA , U.P., INDIA 27/01/2012 NA CHEESE BOARD DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 MIXER GRINDER NA The Patent Office Journal 26/10/

24 DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 NA LIGHTING FIXTURE DESIGN NUMBER CLASS )BELLECORE, LLC., P.O. BOX 541, CARLISLE, MASSACHUSETTS 01741, USA 18/11/2011 BODY BUFFER 29/392, /05/2011 U.S.A. DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 19/12/2011 ALTERNATOR NA The Patent Office Journal 26/10/

25 DESIGN NUMBER CLASS )PARAS PEN PVT. LTD. 575, RABINDRA SARANI, KOLKATA , INDIA 19/04/2012 PEN NA DESIGN NUMBER CLASS )DIAMINTANGIBLES INTERNATIONAL, LTD., C/O VALDY ADMINSTRATION INC., BRTISH COLONIAL, CENTER OF COMMERECE, 3RD FLOOR ONE BAY STREET, PO BOX N-7115 NASSAU, BAHAMAS; 08/11/2010 JEWELRY 29/361, /05/2010 U.S.A. DESIGN NUMBER CLASS )HEADWORKS BIO INC., TEXAS CORPORATION, 800 WILCREST, SUITE 340, HOUSTON, TEXAS 77042, U.S.A., 27/04/2011 MOVING BED BIOREACTOR CARRIER 29/377, /10/2010 U.S.A. The Patent Office Journal 26/10/

26 DESIGN NUMBER CLASS )LG HAUSYS, LTD. 20, YEOUIDO-DONG, YEONGDEUNGPO-GU, SEOUL , REPUBLIC OF KOREA 25/01/2012 SHEET FOR VEHICLE SEATS KR /08/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )MA DESIGN INDIA PRIVATE LIMITED A-41, SECTOR - 80, PHASE - II, NOIDA , U.P., INDIA 27/01/2012 NA TRAY DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 LIGHTING FIXTURE NA The Patent Office Journal 26/10/

27 DESIGN NUMBER CLASS )SENSORMATIC ELECTRONICS, LLC., NEVADA, 6600 CONGRESS AVENUIE, BOCA RATON, FLORIDA, UNITED STATES OF AMERICA 29/11/2011 PEDESTAL ANTENNA 29/ /06/2011 U.S.A. DESIGN NUMBER CLASS )WINSTON COMPANY, INC., 7704 EAST 38TH STREET, TULSA, OKLAHOMA 74145, UNITED STATES OF AMERICA 05/12/2011 DISPLAY BOX FOR TOY 29/393, /01/2011 U.S.A. DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR AUTOMOBILE PLATE COMPONENTS /06/2011 JAPAN The Patent Office Journal 26/10/

28 DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WASHING MACHINES /06/2011 JAPAN DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 30/03/2012 AIR COOLER NA DESIGN NUMBER CLASS )3M INNOVATIVE PROPERTIES COMPANY 3M CENTRE, ST. PAUL;, MINNESOTA , USA 24/10/2011 HYDROCOLLOID FIRST AID DRESSING 29/390, /04/2011 U.S.A. The Patent Office Journal 26/10/

29 DESIGN NUMBER CLASS )JOSEPH VOGELE AG JOSEPH-VOGELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 EXTENSION ARM WITH LIGHT AND REAR MIRROR FOR VEHICLE /08/2011 EUROPEAN UNION DESIGN NUMBER CLASS )SAVERGLASS 3 RUE DE LA GARE, FEUQUIERES, FRANCE 01/02/2012 BOTTLE NA DESIGN NUMBER CLASS )PANASONIC CORPORATION 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 10/02/2012 PORTABLE DEVICE HOLDER FOR AUTOMOBILE /08/2011 JAPAN The Patent Office Journal 26/10/

30 DESIGN NUMBER CLASS )SABMILLER INDIA LIMITED JALAHALLI CAMP ROAD, YESHWANTHPUR, BANGALORE , KARNATAKA, INDIA 23/05/2012 BOTTLE NA DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES LLC SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN, UNITED STATES OF AMERICA /02/2012 VEHICLE BACK DOOR INTERIOR PANEL X 30/08/2011 CHINA DESIGN NUMBER CLASS )AUDI AG INGOLSTADT, GERMANY 27/02/2012 CAR /09/2011 OHIM The Patent Office Journal 26/10/

31 DESIGN NUMBER CLASS )MICHELIN RECHERCHE ET TECHNIQUE S. A. ROUTE LOUIS-BRAILLE 10 ET 12, CH-1763 GRANGES- PACCOT, SWITZERLAND 28/02/2012 TIRE TREAD 29/402, /09/2011 U.S.A. DESIGN NUMBER CLASS )LG HAUSYS, LTD. 20, YEOUIDO-DONG, YEONGDEUNGPO-GU, SEOUL , REPUBLIC OF KOREA 25/01/2012 SHEET FOR VEHICLE SEATS KR /08/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )BIOMÃ RIEUX, INC. 100 RODOLPHE STREET, DURHAM, NORTH CAROLINA, 27712, UNITED STATES OF AMERICA 25/01/2012 SPECIMEN CONTAINER NA The Patent Office Journal 26/10/

32 DESIGN NUMBER CLASS )LAKSHMI MACHINE WORKS LIMITED PERIANAICKENPALAYAM, COIMBATORE , TAMIL NADU, INDIA 08/09/2011 NA STRIPPER FOR TEXTILE MACHINES DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 17/02/2012 LIGHTING FIXTURE NA DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR FRAMES OF BUILDINGS /06/2011 JAPAN The Patent Office Journal 26/10/

33 DESIGN NUMBER CLASS )SMC KABUSHIKI KAISHA AKIHABARA UDX 15F, , SOTOKANDA, CHIYODA-KU, TOKYO , JAPAN 17/01/2012 FLUID PRESSURE CYLINDER /07/2011 JAPAN DESIGN NUMBER CLASS )M/S V-GUARD INDUSTRIES LTD. 33/2905 F, VENNALA HIGH SCHOOL ROAD, VENNALA, KOCHI , KERALA, INDIA 24/01/2012 MIXER NA DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 30/03/2012 TABLE FAN NA The Patent Office Journal 26/10/

34 DESIGN NUMBER CLASS )EXPORTS INTERNATIONAL CORPORATION MANJU NAGAR, OPP. PRABHAT MARKET, RAMPUR ROAD, MORADABAD Â , U. P., INDIA 31/01/2012 NA BOWL DESIGN NUMBER CLASS )PANASONIC CORPORATION 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 10/02/2012 PORTABLE DEVICE HOLDER FOR AUTOMOBILE /08/2011 JAPAN DESIGN NUMBER CLASS )MR. LALIT KUMAR PALTA (PROPRIETOR), NATIONALITY INDIAN TRADING AS LC PACKERS (INDIA) WHOSE ADDRESS IS KHASRA NO-107/1A, PRADHANJI KI GALI, HASTSAL INDUSTRIAL AREA, UTTAM NAGAR, NEW DELHI (INDIA) 18/05/2012 BOTTEL NA The Patent Office Journal 26/10/

35 DESIGN NUMBER CLASS )M. B. EXPORTS LIMITED ADJ. KAIND CANAL BRIDGE, VILLAGE-KAIND, P.O. GHWADDI, NEAR DEHLON, LUDHIANA-MALERKOTLA ROAD, SR-11, LUDHIANA , PUNJAB, INDIA 29/03/2012 NA LEVER RING FOR COUPLING The Patent Office Journal 26/10/

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Cooling systems for rolling stock

Cooling systems for rolling stock Cooling systems for rolling stock Siemens AG, München/ Berlin AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide systems for

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo

More information

15K Series Extented Mini Right Angle Drill Attachment

15K Series Extented Mini Right Angle Drill Attachment Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature

More information

10LF and 12LF Series Right Angle Grinders

10LF and 12LF Series Right Angle Grinders Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right

More information

High Accuracy Wire Electrical Discharge Machines

High Accuracy Wire Electrical Discharge Machines Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

More information

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10N10 Series Inline Grinder

10N10 Series Inline Grinder Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

You ll find many Tsubaki products being

You ll find many Tsubaki products being You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10N M6 Series Right Angle Grinder

10N M6 Series Right Angle Grinder Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

10LF and 12LF Series Right Angle Grinder and Sander

10LF and 12LF Series Right Angle Grinder and Sander Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015 Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.

NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors. NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

N60 Rotary Vane Pneumatic Motor

N60 Rotary Vane Pneumatic Motor Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model

More information

Cooling systems for rolling stock

Cooling systems for rolling stock Cooling systems for rolling stock Alstom Transport / Capa Pictures-F.Clément AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018 QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and

More information

Slide Bearings For Industrial, Marine And Offshore Installations

Slide Bearings For Industrial, Marine And Offshore Installations Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings

More information

ARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation

ARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation P ARTS MANUAL 0F Fork Clamp Manual Number 89 R-0 cascade Cascade is a Registered Trademark of Cascade Corporation 80-0D-CFS-B About This Manual Introduction This Manual shows the parts breakdown for standard

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

HYDRAULIC DRY DISC BRAKES PARTS CATALOG

HYDRAULIC DRY DISC BRAKES PARTS CATALOG HYDRAULIC DRY DISC BRAKES PARTS CATALOG INTRODUCTION AxleTech International is a global manufacturer, and supplier of axles, axle components, planetary axles, brakes, and aftermarket parts for commercial

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Installation Instructions

Installation Instructions c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual EN

Parts Manual EN Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature

More information

Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines

Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK

More information

STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS

STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions

More information

STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS

STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.

More information

Cooling Experts Around The Globe. Coolers and cooling modules for the automotive industry

Cooling Experts Around The Globe. Coolers and cooling modules for the automotive industry Cooling Experts Around The Globe Coolers and cooling modules for the automotive industry COOLING SYSTEMS FOR OFF-ROAD VEHICLES Mercedes G-Class Its distinctive design embodies individual class across the

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Agilent 4UHV Ion Pump Controller. For Ultra High Vacuum

Agilent 4UHV Ion Pump Controller. For Ultra High Vacuum Agilent 4UHV Ion Pump Controller For Ultra High Vacuum The New Agilent 4UHV Ion Pump Controller The new state-of-the-art Agilent 4UHV Ion Pump Controller operates up to four pumps simultaneously and independently.

More information

Single-acting pneumatic cylinder type ECS

Single-acting pneumatic cylinder type ECS Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

TRANSPORT - RENUKOOT Printed Jan. 2018

TRANSPORT - RENUKOOT Printed Jan. 2018 TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02 P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India

More information

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines Important Safety Instructions pro.bose.com Please read this installation guide carefully and save it for future reference.

More information

AUTO SERV 2006 HIGHLIGHTS. Auto Serv 2006 featured

AUTO SERV 2006 HIGHLIGHTS. Auto Serv 2006 featured India s Focused Exhibition on Automotive Care, Maintenance, Service, Parts & Garage Equipments The 2 nd Edition 11 13 November, Chennai Trade Centre, Chennai. Confederation of Indian Industry (CII) organised

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects 09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems

More information

Installation Instructions

Installation Instructions c Installation Instructions Toyota Three Function Internal Reeving Hydraulic Supply Kits This sheet describes the installation of Cascade Three Function Internal Reeving Hydraulic Supply Kits for Toyota

More information

Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines

Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre

More information

Parts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number

Parts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number c Parts Manual Model Serial Number Sideshifter 100E-SSS-B203 R0 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:

More information

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended

More information

SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES

SUBMERSIBLE 4 PUMPS 4 PUMP - SVM SERIES SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES 1 TABLE OF CONTENTS 4 PUMP SERIES PAGE SVM30...4 SVM55...6 SVM70...8 SVM100...10 1.32 1.98 2.64 3.30 3.96 4.62 5.28 5.94 6.61 7.27 EN ISO 9906 SUBMERSIBLE PUMPS

More information

Installation instructions

Installation instructions www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure

More information

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A011 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker

More information

Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort

Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort Precision Motors for Infusion Systems Optimized performance for reliability, versatility and patient comfort Motor designs validated by decades of success in the field. For over 40 years, Portescap has

More information

Options for the Ball Screw QZ Lubricator Wiper Ring W

Options for the Ball Screw QZ Lubricator Wiper Ring W Options for the Ball Screw Lubricator Wiper Ring W CATALOG No.322-1E OPTIONS For Ball Screws, dust-prevention and lubrication accessories are available. You can make a selection according to the application

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

European Patent Office Annual Report 2017 Country profile: Netherlands

European Patent Office Annual Report 2017 Country profile: Netherlands European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A330 R0 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank All dealerships with an

More information

European Patent Office Annual Report 2018 Country profile: Denmark

European Patent Office Annual Report 2018 Country profile: Denmark Annual Report 208 Country profile: Denmark Contact: press@epo.org www.epo.org/media Date of publication: 2 March 209 Growth of European patent applications global 52 703 60 004 59 087 66 594 74 37 +4.6%

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number 65F Sideshifter 65F-SSS-B796 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com I NSPECTION & MAINTENANCE WARNING:

More information

Our cleaning science gets you back to business faster. Chematic Cleaners

Our cleaning science gets you back to business faster. Chematic Cleaners Our cleaning science gets you back to business faster Chematic Cleaners Chematic Cleaners Achieve significant time and cost savings by using Chematic for effective cleaning processes. Clear view on the

More information

15D Series Pistol Grip and Inline Drills

15D Series Pistol Grip and Inline Drills Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language

More information

Parts Manual EN

Parts Manual EN Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX

More information

Guide Ball Bushing NEW

Guide Ball Bushing NEW NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available

More information

Bearings for the Cement and Ready-Mix Concrete Industries

Bearings for the Cement and Ready-Mix Concrete Industries Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to

More information

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

US Exports to China by State

US Exports to China by State US Exports to China by State 2000 10 1818 N Street, NW, Suite 200, Washington, DC 20036 Tel: 202-429-0340 Fax: 202-775-2476 E-mail: info@uschina.org www.uschina.org Executive Summary Exports to China are

More information

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No. Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Setting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in

More information

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

Installation Instructions

Installation Instructions c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns

More information

GRIPPER CHAIN. For form, fill, and vacuum seal wrapping applications. Lower maintenance costs Increased uptime Increased productivity

GRIPPER CHAIN. For form, fill, and vacuum seal wrapping applications. Lower maintenance costs Increased uptime Increased productivity GRIPPER CHAIN For form, fill, and vacuum seal wrapping applications Lower maintenance costs Increased uptime Increased productivity A formidable new force has taken hold of wrapping operations. Get a Grip

More information