Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
|
|
- Ella Hopkins
- 5 years ago
- Views:
Transcription
1 MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic magnetic drive pumps in the world, offering high efficiency and durability for chemical process applications.
2 Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic magnetic drive pumps in the world, offering high efficiency and durability for chemical process applications. Using larger motors for even higher output, the MDW series opens up performance potential in previously unexplored areas. Application example Chemical transfer between supply tanks and through chemical process equipment. Chemical recirculation for filtration and heat exchange applications. Scrubber liquid recirculation. Replacements for conventional sealed pumps. MDW100 1
3 MDW series High discharge capacity, High head and high efficiency The heavy-duty MDW is capable of a maximum discharge capacity of 5,000 L/min and max. discharge head of 98m, enabling applications in previously unexplored areas with a wide range of liquid specific gravities. Highly chemically resistant Fluoroplastic and fine ceramic wetted parts offer high resistance to virtually every industrial chemical, irrespective of concentration. Robust structure Use of the high strength ductile cast iron external armour is mandatory for heavy duty chemical process applications. High casing pressure resistance is achieved with a unique rear casing design preventing stress concentration and incorporating a triple-layer structure (PAT). A special metal shaft is used on the MDW to withstand high radial forces and allow continuous extended operation even under harsh service conditions. Back pullout system The back pullout system allows easy maintenance and inspection without removing pipework. Integrated components and a sealed rear casing support structure enable motor removal safely without chemical leakage. Rear casing support Rear casing ISO compliant The MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional sealed centrifugal pumps. Performance curves (Flow range of IWAKI Magnetic drive process pumps) Hz MDW series HEAD (m) 50 MDE series 40 MDM series MXM series CAPACITY (L/min) 2
4 Construction 1 Front casing 2 Impeller 8 Gasket 7 Sleeve 3 Rear casing 8 Gasket (Air vent port) 8 Gasket (Drain port) 4 Split plate 9 O ring 6 Bearing 5 Magnet capsule Wet-end materials Part number Part name MDW50 MDW80, 100 Front casing Impeller ETFE CFRETFE Rear casing Split plate Magnet capsule Bearing Sleeve Gasket O-ring SiC SiC PTFE Kalrez 3
5 MDW series Pump identification MDW E K Z C 750 J - D 2 Pump size 50: 80mm x 50mm 80: 125mm x 80mm 100: 125mm x 100mm Nominal impeller size 170 to 2 Wet-end main material E: ETFE, CFRETFE, P: Motor poles 2: 4: Material of Bearing/Sleeve K: SiC Material of O-ring Z: Kalrez Type of motor C: Foot mounted type motor Motor output 110 to 750: 11kW to 75kW Pump standard J: JIS flange Special version A: Without drain + With base, coupling, coupling cover S: Without drain + With base, coupling, coupling cover + Special version D: With drain + With base, coupling, coupling cover X: With drain + With base, coupling, coupling cover + Special version B: Without drain + Without base, coupling, coupling cover Y: Without drain + Without base, coupling, coupling cover + Special version E: With drain + Without base, coupling, coupling cover Z: With drain + Without base, coupling, coupling cover + Special version Specification (50/Hz) Model Pump size Suction X Discharge mm Nominal Impeller size L/min Capacity m 3 /hr Head m Motor kw MDW50 80 X / / / / / 25 / 83 / / 31 22,, 37, 45, 55, 75 11, 15, 18.5, 22,, 37 MDW X / / / 120 / 99 37, 45, 55, / / / / 11, 15, 18.5, 22,, 37 MDW X / / / / / / / / 37, 45, 55, 75 11, 15, 18.5, 22,, 37 Common specification Temperature range of liquid handled Maximum operating pressure Motor MDW80/100: -10 to 105 C, MDW50: -10 to 120 C 1.6MPa Foot mounted type motor 4
6 Performance curves (m) 50Hz MDW50 () 70 HEAD 50 MDW80 () 40 MDW100 () MDW50 () MDW80 () MDW100 () (L/min) (m 3 /hr) CAPACITY 5
7 MDW series (m) Hz MDW50 () 70 HEAD 50 MDW80 () 40 MDW100 () MDW50 () MDW80 () MDW100 () (L/min) (m 3 /hr) CAPACITY 6
8 f Dimension (mm) L g h A B H1 H2 c e b d a W i Motor output Model W H1 H2 L a b c d e f g h i A B kw MDW50 MDW80 MDW (1397) (540) (485) (1435) 500 (255) (380) 4Xø23 37 (505) (1495) (400) 50A 80A 45 (610) 550 (280) Xø27 55 (525) (1508) 0 (425) 75 (6) (772) (1645) 0 (320) (1350) (259) 18.5 (540) (485) 500 (255) Xø23 (1397) 125 (380) 22 50A 80A (1435) (380) 37 (610) (505) (1525) 550 (280) (400) 4Xø27 37 (1535) (400) 45 (610) (580) 550 (265) Xø27 80A 125A 55 (1548) (425) 75 (6) (772) (1685) 0 (5) (13) (259) 15 (540) 500 (240) Xø (580) (1437) A 125A 22 (380) (1475) (610) 550 (265) (1565) (400) 4Xø27 37 (5) (1535) 280 (400) 45 (610) 550 (265) Xø27 100A 125A 55 (580) (1548) 0 (425) 75 (6) (772) (1685) 0 (5) (13) (259) 15 (540) (5) 500 (240) Xø (1437) A 125A 22 (380) (1475) (610) (5) 550 (265) (1565) (400) 4Xø27 Mass kg Kanda-Sudacho 2-chome Chiyoda-ku Tokyo Japan TEL : (81) FAX : The posting and copying from this catalogue without permission is not accepted firmly. European office Germany Holland Italy Spain Belgium Denmark Finland France Norway Sweden Switzerland U.K. : IWAKI Europe GmbH : IWAKI Europe GmbH : IWAKI Europe GmbH (Netherlands Branch) : IWAKI Europe GmbH (Italy Branch) : IWAKI Europe GmbH (Spain Branch) : IWAKI Belgium N.V. : IWAKI Nordic A/S : IWAKI Suomi Oy : IWAKI France S.A. : IWAKI Norge AS : IWAKI Sverige AB : IWAKI (Schweiz) AG : IWAKI Pumps (UK) Ltd. TEL: (49) TEL: (49) TEL: (31) TEL: (39) TEL: (34) TEL: (32) TEL: (45) TEL: (358) TEL: (33) TEL: (47) TEL: (46) TEL: (41) TEL: (44) FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: U.S.A. Argentina Singapore Indonesia Malaysia Australia Hong Kong China Korea Taiwan Thailand Vietnam Caution for safety use: Before use of pump, read instruction manual carefully to use the product correctly. Actual pumps may differ from the photos. Specifications and dimensions are subject to change without prior notice. For further details please contact us. Legal attention related to export. Our products and/or parts of products fall in the category of goods contained in control list of international regime for export control. Please be reminded that export license could be required when products are exported due to export control regulations of countries. : IWAKI America Inc. : IWAKI America Inc. (Argentina Branch) : IWAKI Singapore Pte Ltd. : IWAKI Singapore (Indonesia Branch) : IWAKIm Sdn. Bhd. : IWAKI Pumps Australia Pty Ltd. : IWAKI Pumps Co., Ltd. : GFTZ IWAKI Engineering & Trading Co., Ltd. : IWAKI Pumps (Shanghai) Co., Ltd. : IWAKI Korea Co.,Ltd. : IWAKI Pumps Taiwan Co., Ltd. : IWAKI (Thailand) Co.,Ltd. : IWAKI Pumps Vietnam Co., Ltd. TEL: (1) TEL: (54) TEL: (65) TEL: (62) TEL: () TEL: (61) TEL: (852) TEL: (86) TEL: (86) TEL: (82) TEL: (886) TEL: (66) TEL: (84) ( )Country codes FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: CAT-A SXN
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationMDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationMain material GFRPP IWAKI MAGNETIC DRIVE PUMPS
Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical
More informationMDW NEW Magnetic drive pumps
NEW MDW s e r i e s Magnetic drive pumps Max. flow capacity of 300m 3 /hr and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class
More informationMagnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
More informationMagnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
More informationIWAKI MAGNETIC DRIVE PUMPS MDW. Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN Max. flow capacity of 300 3 /hr and ax. discharge head of 98. The world s largest class fluoroplastic agnetic drive pup. The series
More informationSMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE
SMX-F series Self-priming magnetic drive pumps Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation Self-priming magnetic drive pumps Main material CFRETFE The SMX-F
More informationIwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended
More informationMETALLIC CENTRIFUGAL MAGNETIC DRIVE PUMPS MP M MMP MTFO
METALLIC CENTRIFUGAL MAGNETIC DRIVE PUS M M MTFO Small / Medium Sized Standard Centrifugal Pumps» Compact, metallic centrifugal magnetic drive pumps» Excellent heat and pressure resistance» Cover a wide
More informationIWAKI MAGNETIC DRIVE PUMPS MX-F
IAKI MAGNEIC DRIE PUMPS Chemically resistant magnetic drive pumps which can tolerate abnormal operation he series development was based on the concept of optimum reliability under severe operating conditions
More informationMain material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS SMX-F PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN
Main material CFREFE IWAKI SELF-PRIMING MAGNEIC DRIE PUMPS SM-F PAEN JAPAN / U.S.A. / EU / CHINA / AIWAN Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation he
More informationIWAKI CHEMICAL GEAR PUMPS
IWAKI CHEMICAL EAR PUMPS Fine ceramic used in internal gear The Iwaki series chemical pump is the first internal gear pump designed for chemical process applications, in which gears of fine ceramic (SiC
More informationIWAKI CHEMICAL GEAR PUMPS
IWAKI CHEMICAL EAR PUMPS Fine ceramic used in internal gear The Iwaki series chemical pump is the first internal gear pump designed for chemical process applications, in which gears of fine ceramic (SiC
More informationIWAKI Magnet Gear Pump MDG-M4 Instruction Manual
IWAKI Magnet Gear Pump MDG-M4 Instruction Manual Read this manual before use of product This instruction manual includes descriptions of the correct handling of the pump, maintenance and inspection procedures
More informationIWAKI Magnet Gear Pump MDG-M4 (built-in type) Instruction Manual
IWAKI Magnet Gear Pump MDG-M4 (built-in type) Instruction Manual Read this manual before use of product This instruction manual includes descriptions of the correct handling of the pump, maintenance and
More informationIWAKI Gas-Liquid Transfer Pump APN-30/-60 GD3-W Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-30/-60 GD3-W Instruction Manual Read this manual before use of product Thank you for selecting an IWAKI APN-30/-60 GD3-W gasliquid transfer pump (BLDC motor). This instruction
More informationIWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual. Read this manual before use of product
IWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual Read this manual before use of product Thank you for having purchased the Iwaki Bellows Pump Model: CFD-8T-B. This pump is designed
More informationIWAKI Gas-Liquid Transfer Pump APN-05/-10/-20/-30/-60-W (built-in type) Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-05/-10/-20/-30/-60-W (built-in type) Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI APN series gas-liquid transfer pump.
More informationIWAKI PNEUMATIC DRIVE BELLOWS PUMPS
IWAKI PNEUMATIC DRIVE BELLOWS PUMPS F For high purity chemical handling applications in semiconductor processing applications The F-Series includes pneumatic drive bellows pumps that are designed for use
More informationIWAKI Gas-Liquid Transfer Pump APN-085-W Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-085-W Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI APN series gas-liquid transfer pump. This instruction manual deals with
More informationIwaki Photoresist Dispensing Pump PDS-105 RA/RB
Iwaki Photoresist Dispensing Pump PDS-105 RA/RB Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This instruction manual describes important
More informationMXM. Magnetic drive pumps Magnetic drive pumps with an excellent balance of features and performance. s e r i e s
MXM s e r i e s Magnetic drive pumps Magnetic drive pumps with an excellent balance of features and performance The MXM series of pumps have now been added to the line-up of Iwaki s magnetic drive process
More informationIWAKI Air Pump BAN-0510/-0505 Instruction Manual. Read this manual before use of product
IWAKI Air Pump BAN-0510/-0505 Instruction Manual Read this manual before use of product Thank you for selecting an IWAKI BAN-0510/-0505 air pump. This instruction manual deals with "Safety Instructions",
More informationMain material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS SMX-F PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN
Main material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation The
More informationMDT Series Instruction Manual
IWAKI Magnetic Drive Turbine Pump MDT Series Instruction Manual Read this manual before use of product Thank you for having selected IWAKI s magnetic drive turbine pump MDT Series. This instruction manual
More informationIWAKI Air Pump APN-085-D3 Instruction Manual. Read this manual before use of product
IWAKI Air Pump APN-085-D3 Instruction Manual Read this manual before use of product Thank you for selecting an IWAKI APN-085-D3 air pump. This instruction manual deals with "Safety Instructions", "Outline",
More informationIWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual. Read this manual before use of product
IWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual Read this manual before use of product Thank you for having purchased the Iwaki Bellows Pump Model: CFD-8T-B. This pump is designed
More informationMagnetic drive pumps MX series
CATE 62 Magnetic drive pups MX series Withstands difficult operating conditions and offers high efficiency The MX Series represents the latest state of the art design in plastic agnetic drive pups. With
More informationIWAKI Magnetic Drive Pump MX-F100 Instruction Manual. Read this manual before use of product
IWAKI Magnetic Drive Pump MX-F100 Instruction Manual Read this manual before use of product Thank you for selecting an Iwaki MX-F type Magnetic Drive Pump. This instruction manual deals with "Safety Instructions",
More informationPDF-A Magnetic drive pumps. MDM series
PDF-A 0010-09 Magnetic drive pumps MDM series Magnetic drive process pump resistant to dry run damage The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Natural PFA and
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationIWAKI Electromagnetic Metering Pump ES-B/C Type Instruction Manual. Read this manual before use of product
IWAKI Electromagnetic Metering Pump ES-B/C Type Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI's electromagnetic metering pump ES series. This instruction manual
More informationIWAKI Hicera Pump V series Instruction Manual. Read this manual before use of product
IWAKI Hicera Pump V series Instruction Manual Read this manual before use of product Thank you for selecting an Iwaki V Series Hicera Pump. This instruction manual deals with "Safety instructions", "Outline",
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationIwaki Direct Drive Pump RD-40
Iwaki Direct Drive Pump RD-40 Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This instruction manual describes important precautions and
More informationYou ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
More informationKnife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
More informationKnife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
More informationIwaki Direct Drive Pump RD Series
Iwaki Direct Drive Pump RD Series Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This instruction manual describes important precautions
More informationFG Series, 230V ac Toroidal Single Primary Transformers
A high quality range of open style toroidal transformers with flying leads. Featuring a single primary winding rated at 230V 50/60Hz, and dual secondary windings. Secondary windings can be connected in
More informationHOW TO SEND E-INVOICES TO CARGOTEC
HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving
More informationIWAKI Metering Pump LK-A, B, C Models Instruction Manual
IWAKI Metering Pump LK-A, B, C Models Instruction Manual Read this manual before use of product Thank you for selecting IWAKI s diaphragm pump LK. This pump is a diaphragm type metering pump of which the
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More informationProcess Magnetic Drive Pump. Global Technical Information
Process Magnetic Drive Pump Global Technical Information Introduction Magnetic drive pumps have become the norm in the corrosive-resistant pump marketplace. Iwaki s magnetic drive pumps are always on step
More informationTotal credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationSlimline Axial Flow Fans 80mm 92mm 119mm
80mm, 119mm Features: Low cost, low noise, high pressure fans. Sleeve bearings. Rated plastic impellers. Supplied with 300mm, 22AWG lead wire. 80mm, 92mm, 119mm Slimline Features: Low cost slimline AC
More informationSingle-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
More informationStafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
More informationGuide Ball Bushing NEW
NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available
More informationHELICOPTERS Service. Helicopter Maintenance Upgrades
HELICOPTERS Service Helicopter Maintenance Upgrades MISSION SUCCESS WITH AIRBUS HELICOPTERS UPGRADES Airbus Helicopters Customer Centers are at your service: providing local, on-the-spot solutions Airbus
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationKnife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5
Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore
More informationMTC. Mold Temperature Control. Consilience Technology
We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationKnife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationThermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
More informationSFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability
SFC-FID ASTM System SFC-4000 Series SFC Performance Innovation Reliability The JASCO SFC-FID system has been developed as a simple and validated turn-key solution for the measurement of the two ASTM standard
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationMX-F. Magnetic drive pumps. Chemically resistant magnetic drive pumps which can tolerate abnormal operation. s e r i e s
MX-F s e r i e s Magnetic drive pumps Chemically resistant magnetic drive pumps which can tolerate abnormal operation The MX-F series development was based on the concept of optimum reliability under severe
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationFEDERAL RESERVE statistical release
FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90
More informationAnnex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a
194 Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a Antigua and Barbuda Bahamas China Belgium 0 0-9 122 0.2 1 59 0.1 Bermuda 0 0-17 1 907 2.8 0 0 - Brazil
More informationGrundfos Home Booster
GRUNDFOS DATA BOOKLET Grundfos Home Booster UPA 15-9, UPA 15-12, UPA 15-16, UPA 12 5/6 Hz Grundfos Home Booster Table of contents 1. Product description 3 Applications..................................................................................
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationTI TOWN CHEMICAL PUMPS
TMI Series (Industrial-process thermoplastic resin centrifugal pumps) Exceptional mechanical strength provided by the ductile cast iron (FCD 450) pump casing and non metallic back casing cover TI TOWN
More informationSeries PMB-D PRC-A PMB-C
Low Vacuum Pump Mechanical Booster Pump PMB / PRC Series By using mechanical booster pumps together with backing pumps such as dry vacuum pumps and oil rotary pumps, it is possible to increase pumping
More informationDYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future
LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA
More informationKnife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 13
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-06-03 issue 13 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
More informationCrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
More informationPerformance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com
More informationWorld Air Conditioner Demand by Region
World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning Industry Association 1 World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning
More informationMains Flex Oval/Round 2-3 Core
2 Core 3 Core Features: Flexible mains cable for internal use in the direct connection of equipment to mains power supplies. PVC insulated and sheathed flexible mains cords. Standard core colours : Brown
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationDrive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
More informationThick Film Chip Resistors
Thick Film Chip Resistors Features: Small size and light weight. Suitable for both flow and reflow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications:
More informationMC 1% Series Thick Film Chip Resistors
Features: Small size and light weight. Suitable for both flow and re-flow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications: Temperature coefficient
More informationEFI Internal Report 8, 2002 East Asian Forest Products Trade and Europe's Trade Relationship with East Asian Countries Bruce Michie and Emi Pesonen
EFI Internal Report, n Forest Products Trade and 's Trade Relationship with n Countries Bruce Michie and Emi Pesonen Publisher: an Forest Institute Torikatu, FI- Joensuu Finland Tel. + Fax. + 9 Email.
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationPREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
More informationMICRO DIAPHRAGM GAS PUMPS NMP 830, NMP 850 and NMP
MICRO DIAPHRAGM GAS PUMPS NMP 830, NMP 850 and NMP 850.1.2 DATA SHEET E005 NMP 830 KNE NMP 850 KNDC NMP 850.1.2 KNDC B Concept The Micro Diaphragm Gas Pumps from KNF are based on a simple principal - an
More informationOur Most Important Connection is with You. NSX ARINC 600. Power and Performance NSX ARINC 600
Our Most Important Connection is with You. NSX ARINC 600 Power and Performance NSX ARINC 600 NSX (ARINC 600) Radiall s NSX Arinc 600 series has been used for more than 30 years to connect high performance
More informationREVIEW OF MARITIME TRANSPORT 2013
UNITED NATIONS CONFERENCE ON TRADE AND DEVELOPMENT REVIEW OF MARITIME TRANSPORT 2013 Report by the UNCTAD secretariat Annex III UNITED NATIONS New York and Geneva, 2013 STATISTICAL ANNEX 173 True nationality
More informationSpherical Roller Bearings
Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.
More informationInstallation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr
More information1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
More informationRoll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit
More information