CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

Size: px
Start display at page:

Download "CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,"

Transcription

1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 13/09/

2 DESIGN CORRIGENDUM (01) The Registered Design No which has been erroneously published in the official Journal of India dated 02/08/2013, part II, at page 20381, column 3 in the name of BIOCEP LTD., A CORPORATION ORGANIZED OF P.O. BOX 1008, SAFED 13100, ISRAEL Class 24-01, Date of Registration 07/06/2012, Titled as CONTAINER USFD IN CELL SEPARATION DEVICE, Priority Number 51944, DATE 15/12/2011, Country Israel should read as BIOCEP LTD., A CORPORATION ORGANIZED OF P.O. BOX 1008, SAFED 13100, ISRAEL Class 24-01, Date of Registration 07/06/2012, Titled as CONTAINER USED IN CELL SEPARATION DEVICE, Priority Number 51944, DATE 15/12/2011, Country Israel (02) The Registered Design No which has been erroneously published in the official Journal of India dated 15/02/2013, part II, at page 4777, column 1 in the name of PAVONE IIARIA, VIA CARDINALE CICADA 37, I ATRI (TERAMO), ITALY, 2) Pavone Mariachiara, Class 03-01, Date of Registration 25/04/2012, Titled as HANDBAG, Priority Number DM/077300, Date 15/12/2011, Country WIPO should read as PAVONE ILARIA, VIA CARDINALE CICADA 37, I ATRI (TERAMO), ITALY, 2) Pavone Mariachiara, Class 03-01, Date of Registration 25/04/2012, Titled as HANDBAG, Priority Number DM/077300, Date 15/12/2011, Country WIPO (03) The Registered Design No which has been erroneously published in the official Journal of India dated 08/02/2013, part II, at page 3972, column 2 in the name of PAVONE IIARIA, VIA CARDINALE CICADA 37, I ATRI (TERAMO), ITALY, Class 03-01, Date of Registration 25/04/2012, Titled as HANDBAG, Priority Number DM/077300, Date 15/12/2011, Country WIPO should read as PAVONE ILARIA, VIA CARDINALE CICADA 37, I ATRI (TERAMO), ITALY, Class 03-01, Date of Registration 25/04/2012, Titled as HANDBAG, Priority Number DM/077300, Date 15/12/2011, Country WIPO (04) The Registered Design No which has been erroneously published in the official Journal of India dated 26/07/2013, part II, at page 19862, column 2 in the name of KOHLER CO., US CO.OF 444 HIGH LAND DRIVE, KOHLER, WISCONSIN UINTED STATES OF AMERICA, Class 23-02, Date of Registration 18/04/2011, Titled as PLUMBING FIXTURE, Priority Number 29/377,697, Date 25/10/2010, Country U.S.A. should read as KOHLER CO., US CO. OF 444 HIGH LAND DRIVE, KOHLER, WISCONSIN UNITED STATES OF AMERICA, Class 23-02, Date of Registration 18/04/2011, Titled as PLUMBING FIXTURE, Priority Number 29/377,697, Date 25/10/2010, Country U.S.A. The Patent Office Journal 13/09/

3 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 13/09/

4 THE DESIGNS ACT, 2000 SECTION 30 DESIGN ASSIGNMENT The Design stands in the name of Honda Motor Co., LTD. registered under the Designs Act, 2000 has been assigned in the Register of Designs in the name as follows:- Design No. Class Name , HONDA PATENTS & TECHNOLOGIES NORTH AMERICA, LLC OF 700 VAN NESS AVENUE, TORRANCE, CALIFORNIA 90501, A US CORPORATION The Patent Office Journal 13/09/

5 OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN NUMBER CLASS )KEJRIWAL RAHUL KUMAR, PRABHAT BUILDING, 6TH FLOOR, FLAT NO.36 B ROAD, CHURCHGATE, MUMBAI , MAHARASHTRA, INDIA. 18/01/2010 STATIONARY EQUIPMENT DESIGN NUMBER CLASS )SMC KABUSHIKI KAISHA, A JAPANESE CORPORATION OF AKIHABARA UDX 15F, , SOTOKANDA, CHIYODA-KU, TOKYO , JAPAN 09/01/2013 ELECTRIC CLAMP NUMBER DATE COUNTRY /07/2012 JAPAN DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM The Patent Office Journal 13/09/

6 DESIGN NUMBER CLASS )MAHESHBHAI SHIVALALBHAI GAJERA AN INDIAN NATIONAL PROPRIETOR OF SHREE HARIKRUPA DIE CASTING AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT K-1, 242/17, B/4 MEL-TECH, NEAR TURBO BEARING, AJI VASAHAT GIDC, RAJKOT , GUJARAT-INDIA. 22/01/2013 HANDLE DESIGN NUMBER CLASS )METTLER-TOLEDO AG, A CORPORATION ORGANIZED AND EXISTING UNDER THE LAWS OF SWITZERLAND, OF IM LANGACHER 44, CH-8606 GREIFENSEE, SWITZERLAND. 03/12/2012 INSTRUMENT FOR ELECTROCHEMICAL MEASUREMENTS NUMBER DATE COUNTRY /06/2012 OHIM DESIGN NUMBER CLASS )HOLLANDER HOME FASHIONS, LLC, A COMPANY INCORPORATED UNDER THE LAWS OF THE UNITED STATES OF AMERICA, OF 6501 CONGRESS AVENUE, SUITE 300, BOCA RATON, FLORIDA 33487, THE UNITED STATES OF AMERICA 05/02/2013 PILLOW NUMBER DATE COUNTRY /08/2012 CHINA The Patent Office Journal 13/09/

7 DESIGN NUMBER CLASS )CHANGCHAI CO., LTD., A COMPANY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 37 HUAIDE ROAD (NORTH), CHANGZHOU, JIANGSU , PEOPLE S REPUBLIC OF CHINA, AND JIANGSU UNIVERSITY, A UNIVERSITY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 301 XUEFU ROAD, ZHENJIANG, JIANGSU , PEOPLE S REPUBLIC OF CHINA 05/02/2013 DIESEL ENGINE NUMBER DATE COUNTRY /08/2012 CHINA DESIGN NUMBER CLASS )YAZAKI CORPORATION, A JAPANESE CORPORATION OF 4-28, MITA 1-CHOME, MINATO-KU, TOKYO , JAPAN 13/12/2012 BATTERY COVER NUMBER DATE COUNTRY /06/2012 JAPAN DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC The Patent Office Journal 13/09/

8 DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC DESIGN NUMBER CLASS )S.C. JOHNSON & SON, INC., A CORPORATION ORGANIZED AND EXISTING UNDER THE LAWS OF THE STATE OF WISCONSIN, UNITED STATES OF AMERICA WHO ARE AMERICAN BY NATIONALITY AND WHOSE ADDRESS IS 1525 HOWE STREET, RACINE, WISCONSIN , UNITED STATES OF AMERICA 20/12/2012 LIQUID APPLICATOR NUMBER DATE COUNTRY 29/425,767 27/06/2012 U.S.A. DESIGN NUMBER CLASS )DUKE MANUFACTURING CO., A COMPANY INCORPORATED IN THE STATE OF MISSOURI OF 2305 NORTH BROADWAY, ST. LOUIS, MISSOURI 63102, USA 24/12/2012 PAN NUMBER DATE COUNTRY 29/425,706 26/06/2012 U.S.A. The Patent Office Journal 13/09/

9 DESIGN NUMBER CLASS )HINDUSTAN UNILEVER LIMITED, A COMPANY INCORPORATED UNDER THE INDIAN COMPANIES ACT, 1913, HAVING ITS REGISTERED OFFICE AT UNILEVER HOUSE, B. D. SAWANT MARG, CHAKALA, ANDHERI (EAST), MUMBAI , STATE OF MAHARASHTRA, INDIA 26/12/2012 BOTTLE NUMBER DATE COUNTRY /07/2012 OHIM DESIGN NUMBER CLASS )M/S CITIZEN UDYOG, ST. NO. 2, NIRMAL NAGAR, DUGRI ROAD, LUDHIANA (PUNJAB) INDIA AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS:- NARESH BEHL BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 26/03/2013 BUTTON MOULDING MACHINE DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM The Patent Office Journal 13/09/

10 DESIGN NUMBER CLASS )DIVYESHBHAI BARASIYA AN INDIAN NATIONAL SOLE PROPRIETOR OF SHREE TECHNOCAST AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT AJI GIDC, SHED NO. K-1-242/5, MAL-TECH CHOWK, NR. TARBO BEARING, RAJKOT-3, GUJARAT-INDIA. 22/01/2013 HANDLE DESIGN NUMBER CLASS )AUDI AG, A JOINT STOCK COMPANY ESTABLISHED UNDER GERMAN LAW, OF INGOLSTADT, GERMANY 10/01/2013 VEHICLE WHEEL RIM NUMBER DATE COUNTRY /07/2012 OHIM DESIGN NUMBER CLASS )HONDA MOTOR CO., LTD., A CORPORATION OF JAPAN OF 1-1, MINAMI-AOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN 30/11/2012 REAR COMBINATION LAMP FOR AUTOMOBILES NUMBER DATE COUNTRY /05/2012 JAPAN The Patent Office Journal 13/09/

11 DESIGN NUMBER CLASS )METTLER-TOLEDO AG, A CORPORATION ORGANIZED AND EXISTING UNDER THE LAWS OF SWITZERLAND, OF IM LANGACHER 44, CH-8606 GREIFENSEE, SWITZERLAND. 03/12/2012 INSTRUMENT FOR ELECTROCHEMICAL MEASUREMENTS NUMBER DATE COUNTRY /06/2012 OHIM DESIGN NUMBER CLASS )PIYUSHBHAI DILIPBHAI DHOLARIYA (ADULT, & INDIAN NATIONAL) PROPRIETOR OF FLOWTECH INDUSTRIES HAVING PLACE OF BUSINESS AT : 7, PARSANA SOCIETY, 50 FOOT ROAD, NEAR SORATHIYAWADI CIRCLE, RAJKOT-GUJARAT (INDIA) 05/02/2013 HANDLE DESIGN NUMBER CLASS )M/S ESCORTS LTD., (A COMPANY INCORPORATED UNDER INDIAN COMPANIES ACT, 1956), 15/5, MATHURA ROAD, FARIDABAD , HARYANA., (INDIA) 04/03/2013 CRANE The Patent Office Journal 13/09/

12 DESIGN NUMBER CLASS )SKODA AUTO A.S. TR. VACLAVE KLEMENTA 869, CZ MLADA BOLESLAV, CZECH REPUBLIC 26/06/2012 CUPBOARD NUMBER DATE COUNTRY /02/2012 OHIM DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC DESIGN NUMBER CLASS )GOVERNMENT TOOL ROOM AND TRAINING CENTRE, DUMKA, VILL.+POST-JARDAHA, PS-TALJHARI, VIA-GHORMARA, DIST- DUMKA, PIN , NATIONALITY-AN INDIAN INSTITUTE 24/12/2012 DRUM BRAKE FOR RICKSHAW The Patent Office Journal 13/09/

13 DESIGN NUMBER CLASS )FILEX SYSTEMS PVT. LTD, 4379/4, 1ST FLOOR, ANSARI ROAD, DARYA GANJ, NEW DELHI [AN INDIAN COMPANY] 28/12/2012 FILE CLIP DESIGN NUMBER CLASS )M/S CITIZEN UDYOG, ST. NO. 2, NIRMAL NAGAR, DUGRI ROAD, LUDHIANA (PUNJAB) INDIA AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS:- NARESH BEHL BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 26/03/2013 ZIG-ZAG EMBROIDERY MACHINE DESIGN NUMBER CLASS )I. E. PARK S.R.L. SOLI BUMPER CARS, VIA DON PASQUINO BORGHI, 3, GATTATICO (REGGIO EMILIA), ITALY, AN ITALIAN COMPANY. 12/10/2012 BUMPER CAR NUMBER DATE COUNTRY /04/2012 OHIM The Patent Office Journal 13/09/

14 DESIGN NUMBER CLASS )(1) GOVINDBHAI MULJIBHAI BHOOT (2) DINESHBHAI MAGANBHAI CHORATIYA (BOTH PARTNERS ARE INDIAN NATIONAL) PARTNER OF SOMNATH METAL (INDIAN PARTNERSHIP FIRM) HAVING PLACE OF BUSINESS AT : 6, PATEL NAGAR, NR. BHALADA INDUSTRIES, 80 FEET ROAD, SORATHIAWADI, RAJKOT GUJARAT (INDIA) 10/01/2013 HANDLE DESIGN NUMBER CLASS )EVEREADY INDUSTRIES INDIA LTD., 1, MIDDLETON STREET, KOLKATA , WEST BENGAL, INDIA, AN INDIAN COMPANY. 15/01/2013 FLASHLIGHT DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM The Patent Office Journal 13/09/

15 DESIGN NUMBER CLASS )COLGATE-PALMOLIVE COMPANY, A DELAWARE CORPORATION, 300 PARK AVENUE, NEW YORK, NEW YORK 10022, USA 22/01/2013 ORAL CARE IMPLEMENT PACKAGE NUMBER DATE COUNTRY 29/429,782 16/08/2012 U.S.A. DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED, (AN INDIAN COMPANY), AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 20/03/2013 PROTECTIVE RELAY DESIGN NUMBER CLASS )M/S. V-GUARD INDUSTRIES LTD., AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT OF 1956 WHOSE ADDRESS IS 33/2905 F, VENNALA HIGH SCHOOL ROAD, VENNALA, KOCHI , KERALA STATE, INDIA 26/11/2012 BODY OF MIXER The Patent Office Journal 13/09/

16 DESIGN NUMBER CLASS )CHANGCHAI CO., LTD., A COMPANY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 37 HUAIDE ROAD (NORTH), CHANGZHOU, JIANGSU , PEOPLE S REPUBLIC OF CHINA, AND JIANGSU UNIVERSITY, A UNIVERSITY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 301 XUEFU ROAD, ZHENJIANG, JIANGSU , PEOPLE S REPUBLIC OF CHINA 05/02/2013 GEAR CHAMBER GAP OF SINGLE CYLINDER DIESEL ENGINE NUMBER DATE COUNTRY /08/2012 CHINA DESIGN NUMBER CLASS )SOMA GÁBOR UNGÁR, A CITIZEN OF HUNGARY, OF BUDAPEST Á FONYA U. 9. H-1025 HUNGARY 04/01/2013 ROLLER NUMBER DATE COUNTRY /07/2012 OHIM DESIGN NUMBER CLASS )APPLE INC., 1 INFINITE LOOP, CUPERTINO, CALIFORNIA 95014, UNITED STATES OF AMERICA, A CORPORATION INCORPORATED IN THE STATE OF CALIFORNIA 06/03/2013 LANYARD FOR ELECTRONIC DEVICE NUMBER DATE COUNTRY 29/431,562 08/09/2012 U.S.A. The Patent Office Journal 13/09/

17 DESIGN NUMBER CLASS )ASCO NUMATICS INDIA PRIVATE LIMITED, AN INDIAN COMPANY OF 57 KUNDRATHUR MAIN ROAD, GERUGAMBAKKAM, PIN , CHENNAI, TAMILNADU, INDIA. 20/07/2012 COIL FOR SOLENOID VALVE DESIGN NUMBER CLASS )KNOLL, INC., A DELAWARE CORPORATION, OF 1235 WATER STREET, EAST GREENVILLE, PENNSYLVANIA 18041, UNITED STATES OF AMERICA. 16/11/2012 TABLE BASE NUMBER DATE COUNTRY 29/423,927 06/06/2012 U.S.A. DESIGN NUMBER CLASS )GEBERIT INTERNATIONAL AG SCHACHENSTRASSE 77, 8645 JONA, SWITZERLAND, A COMPANY OF SWITZERLAND 01/03/2013 COVER FOR A DRAIN NUMBER DATE COUNTRY /09/2012 WIPO The Patent Office Journal 13/09/

18 DESIGN NUMBER CLASS )REFRACTORY INTELLECTUAL PROPERTY GMBH & CO. KG, AN AUSTRIAN COMPANY OF WIENERBERGSTR. 11, A-1100 WIEN, AUSTRIA 19/12/2012 CHECKER BRICK NUMBER DATE COUNTRY /06/2012 OHIM DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC The Patent Office Journal 13/09/

19 DESIGN NUMBER CLASS )APTARGROUP, INC., 475 WEST TERRA COTTA, SUITE E, CRYSTAL LAKE, ILLINOIS , UNITED STATES OF AMERICA, A DELAWARE CORPORATION 26/03/2013 DISPENSING CLOSURE NUMBER DATE COUNTRY 29/433,230 27/09/2012 U.S.A. DESIGN NUMBER CLASS )DR. JASWANTSING DILIPSING PATIL, M/S. DEEP GANGA TOTAL HEALTH SOLUTIONS PVT. LTD., C-101, SATELLITE GARDEN, FILM CITY ROAD, GOREGAON(E), MUMBAI /07/2012 PREFABRICATED CABINET DESIGN NUMBER CLASS )AUDI AG, A JOINT STOCK COMPANY ESTABLISHED UNDER GERMAN LAW, OF INGOLSTADT, GERMANY 10/01/2013 VEHICLE WHEEL RIM NUMBER DATE COUNTRY /07/2012 OHIM The Patent Office Journal 13/09/

20 DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES, LLC A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF UNITED STATES OF AMERICA, HAVING ITS OFFICE AT SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN , UNITED STATES OF AMERICA 11/01/2013 VEHICLE HEADLIGHT NUMBER DATE COUNTRY /08/2012 GERMANY DESIGN NUMBER CLASS )EVEREADY INDUSTRIES INDIA LTD., 1, MIDDLETON STREET, KOLKATA , WEST BENGAL, INDIA, AN INDIAN COMPANY. 15/01/2013 LAMP DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM The Patent Office Journal 13/09/

21 DESIGN NUMBER CLASS )DAIKIN INDUSTRIES LTD. A JAPANESE COMPANY OF THE ADDRESS: UMEDA CENTER BUILDING, 4-12 NAKAZAKI-NISHI 2-CHOME, KITA- KU, OSAKA-SHI, OSAKA-FU, JAPAN 18/01/2013 AIR CONDITIONER NUMBER DATE COUNTRY /07/2012 JAPAN \ DESIGN NUMBER CLASS )(1) MITESHBHAI B. PIPALIYA (2) HITESHBHAI M. PIPALIYA (3) JIGNESHBHAI B. HIRAPARA ALL INDIAN NATIONAL PARTNERS OF PATEL DIE CASTING AN INDIAN PARTNERSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT PATELNAGAR-4, OPP. SATYANARAYAN MILL, 80 FEET MAIN ROAD, RAJKOT, GUJARAT-INDIA. 22/01/2013 HANDLE DESIGN NUMBER CLASS )(1) MRS. SNEH MEHTA W/O. SH. VIRENDRA MEHTA, (NATIONALITY-INDIAN) (2) PRIYANK MEHTA S/O. SH. VIRENDRA MEHTA (NATIONALITY-INDIAN) (3) PRITOSH MEHTA S/O. SH. VIRENDRA MEHTA (NATIONALITY-INDIAN) (4) MRS. KHUSHBOO MEHTA W/O. SH. PARITOSH MEHTA (NATIONALITY-INDIAN) PARTNERS OF ATTITUDES (AN INDIAN PARTNERSHIP FIRM) AT 42,MADRAMPURA, CIVIL LINE JAIPUR (RAJASTHAN) INDIA. 23/01/2013 BENCH The Patent Office Journal 13/09/

22 DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED, (AN INDIAN COMPANY), AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 20/03/2013 CURRENT TRANSFORMER DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED, (AN INDIAN COMPANY), AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 20/03/2013 VOLTAGE TRANSFORMER DESIGN NUMBER CLASS )BELL HELICOPTER TEXTRON INC., A U.S. COMPANY, POST OFFICE BOX 482, FT. WORTH, TX, J76101, U.S.A. 06/08/2012 HELICOPTER NUMBER DATE COUNTRY 29/ /02/2012 U.S.A. The Patent Office Journal 13/09/

23 DESIGN NUMBER CLASS )M/S V-GUARD INDUSTRIES LTD., AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT OF 1956 WHOSE ADDRESS IS 33/2905 F, VENNALA HIGH SCHOOL ROAD, VENNALA, KOCHI , KERALA STATE, INDIA 26/11/2012 BODY OF MIXER DESIGN NUMBER CLASS )CHANGCHAI CO., LTD., A COMPANY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 37 HUAIDE ROAD (NORTH), CHANGZHOU, JIANGSU , PEOPLE S REPUBLIC OF CHINA, AND JIANGSU UNIVERSITY, A UNIVERSITY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 301 XUEFU ROAD, ZHENJIANG, JIANGSU , PEOPLE S REPUBLIC OF CHINA 05/02/2013 FUEL TANK OF SINGLE CYLINDER DIESEL ENGINE NUMBER DATE COUNTRY /08/2012 CHINA DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES, LLC A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF UNITED STATES OF AMERICA, HAVING ITS OFFICE AT SUITE 800, 330 TOWN CENTRE DRIVE, DEARBORN MICHIGAN , UNITED STATES OF AMERICA 04/01/2013 VEHICLE FOG LAMP COVER NUMBER DATE COUNTRY /08/2012 GERMANY The Patent Office Journal 13/09/

24 DESIGN NUMBER CLASS )RECKITT & COLMAN (OVERSEAS) LIMITED, BATH ROAD, SLOUGH, BERKSHIRE, SL1 3UH, UNITED KINGDOM. 04/03/2013 AIR FRESHENER REFILL NUMBER DATE COUNTRY /09/2012 EUROPEAN UNION DESIGN NUMBER CLASS )THAIKATTIL JOSE, THAIKATTIL HOUSE, OLLUKARA P.O., THRISSUR, KERALA STATE, , INDIA, AN INDIAN NATIONAL 07/03/2013 FOOTWEAR DESIGN NUMBER CLASS )KNOLL, INC., A DELAWARE CORPORATION, 1235 WATER STREET, EAST GREENVILLE, PENNSYLVANIA 18041, UNITED STATES OF AMERICA. 16/11/2012 ELECTRICAL POWER POLE NUMBER DATE COUNTRY 29/423,815 05/06/2012 U.S.A. The Patent Office Journal 13/09/

25 DESIGN NUMBER CLASS )THIERRY ANNEZ DE TABOADA, A BELGIAN NATIONAL RESIDING AT 5397 NANCY GREENE WAY, NORTH VANCOUVER, BC V7R 4N2, CANADA. 18/02/2013 CAP WITH INTEGRATED SHIFTABLE EYEWEAR DESIGN NUMBER CLASS )NOKIA CORPORATION, A FINNISH CORPORATION, OF KEILALAHDENTIE 4, ESPOO, FIN-02150, FINLAND. 27/02/2013 MOBILE PHONE NUMBER DATE COUNTRY 29/ /08/2012 U.S.A. DESIGN NUMBER CLASS )RAJ MAHAJAN, H. NO. 4939, MOHAN NAGAR, NEAR POST OFFICE, SULTANWIND RAOD, AMRITSAR (PUNJAB), INDIA, AN INDIAN NATIONAL 01/03/2013 STAND FOR FAN The Patent Office Journal 13/09/

26 DESIGN NUMBER CLASS )3M INNOVATIVE PROPERTIES COMPANY, A COMPANY INCORPORATED IN THE STATE OF DELAWARE OF 3M CENTER, SAINT PAUL, MINNESOTA , U.S.A. 17/12/2012 ORTHOPEDIC PRESSURE PAD NUMBER DATE COUNTRY 29/424,976 18/06/2012 U.S.A. DESIGN NUMBER CLASS )BECTON DICKINSON FRANCE S.A.S., A COMPANY INCORPORATED UNDER THE LAWS OF FRANCE, OF RUE ARISTIDE BERGES, LE PONT-DE-CLAIX, FRANCE 18/12/2012 MEDICAL INJECTOR NUMBER DATE COUNTRY 29/424,954 18/06/2012 U.S.A. DESIGN NUMBER CLASS )SUMITOMO RUBBER INDUSTRIES LTD. A COMPANY ORGANIZED UNDER THE LAWS OF JAPAN OF THE ADDRESS: 6-9, WAKINOHAMA-CHO 3-CHOME, CHUO-KU, KOBE-SHI, HYOGO , JAPAN 12/03/2013 TIRE FOR MOTORCYCLE The Patent Office Journal 13/09/

27 DESIGN NUMBER CLASS )LG ELECTRONICS INC. 20 YEOUIDO - DONG, YEONGDEUNGPO - GU, SEOUL , REPUBLIC OF KOREA A CORPORATION INCORPORATED UNDER THE LAWS OF THE REPUBLIC OF KOREA 14/03/2013 AIR CONDITIONER DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC The Patent Office Journal 13/09/

28 DESIGN NUMBER CLASS )SH. SONAL JAIN (AN INDIAN NATIONAL) (PROPRIETOR) TRADING AS LITTLE PROFIT TRADING COMPANY, 2804, 2ND FLOOR, MAIN QUTAB ROAD, SADAR BAZAR, DELHI /02/2013 COSMETIC CONTAINER DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM DESIGN NUMBER CLASS )RAMESHBHAI BABUBHAI RAMANI (INDIAN NATIONALS) AND SOLE PROPRIETOR OF JAY TIME INDUSTRIES (INDIAN PROPRIETORSHIP CONCERN) HAVING PLACE OF BUSINESS AT- 6/4, GOKUL NAGAR, OPP: HARISHRAN WELDING, NEAR NATHJI PAN, 50 FEET ROAD, KOTHARIYA ROAD, RAJKOT- GUJARAT (INDIA) 13/12/2012 HANDLE The Patent Office Journal 13/09/

29 DESIGN NUMBER CLASS )PRAVIN AMRUTIYA AN INDIAN NATIONAL SOLE PROPRIETOR OF RIDDHI ENGINEERS AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT 38, YAMUNA IND. ESTATE, PART-2, NEAR REVABHAI ESTATE, OPP. MARUTI VIDEO THEATER, CTM, AMRAIWADI, AHMEDABAD GUJARAT-INDIA. 15/01/2013 VALVE DESIGN NUMBER CLASS )MOEN INCORPORATED, A DELAWARE CORPORATION HAVING A PLACE OF BUSINESS AT AL MOEN DRIVE, NORTH OLMSTED, OHIO 44070, U.S.A. 16/01/2013 FAUCET CARTRIDGE NUMBER DATE COUNTRY 29/427,376 17/07/2012 U.S.A. DESIGN NUMBER CLASS )(1) GOPALBHAI MAVJIBHAI SAAVARIYA (2) KALPESHBHAI KANTIBHAI KANANI (3) HASMUKHBHAI CHHAGANBHAI BEDIYA (ALL THE PARTNERS ARE ADULT AND INDIAN NATIONAL) PARTNERS OF TARSHI MANUFACTURES (INDIAN PARTNERSHIP FIRM) HAVING PLACE OF BUSINESS AT: 50, FEET MAIN ROAD, PATEL NAGAR-2, SADBHAVNA SOCIETY, BHIOJA BHAGAT CHOWK, RAJKOT GUJARAT (INDIA) 04/12/2012 HANDLE The Patent Office Journal 13/09/

30 DESIGN NUMBER CLASS )LUMAX INDUSTRIES LIMITED, A COMPANY INCORPORATED UNDER THE LAWS OF THE REPUBLIC OF INDIA, HAVING ITS REGISTERED OFFICE AT B-85-86, MAYAPURI INDUSTRIAL AREA, PHASE-I, NEW DELHI , INDIA 29/01/2013 FOG LAMP FOR VEHICLES DESIGN NUMBER CLASS )ENDICO POWER TOOLS (INDIA), AN INDIAN COMPANY, OF 1276/1, STREET NO. 3, SHIMLAPURI, LUDHIANA , PUNJAB, INDIA 30/01/2013 GUIDE ROD OF ROUTER MACHINE DESIGN NUMBER CLASS )RADICO KHAITAN LIMITED PLOT NO. J-1, BLOCK B-1, MOHAN CO-OP INDUSTRIAL AREA, MATHURA ROAD, NEW DELHI , INDIA. 09/03/2012 BOTTLE The Patent Office Journal 13/09/

31 DESIGN NUMBER CLASS )RAJESH KUMAR (AN INDIAN NATIONAL), TRADING AS M/S. ADARSH INDUSTRIES, C-226, SECTOR-2, TAALA NAGRI, ALIGARH (U.P.) 06/03/2013 DOOR LOCK DESIGN NUMBER CLASS )MARCOPOLO S.A., NATIONALITY: BRAZILIAN ADDRESS AT AVENIDA MARCOPOLO, Nº 280, CAXIAS DO SUL, RS, BRAZIL 09/11/2012 REAR LAMP TO AUTOMOTIVE VEHICLE NUMBER DATE COUNTRY BR /05/2012 BRAZIL DESIGN NUMBER CLASS )HEGDE AGRO IMPEX PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY REGISTERED UNDER COMPANIES ACT 1956, HAVING ITS REGISTERED OFFICE & WORKS AT 2ND K. M., B. K. ROAD, SAGARA (T), SHIMOGA (D), KARNATAKA (ST.), INDIA 13/12/2012 TRANSPORTER The Patent Office Journal 13/09/

32 DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC DESIGN NUMBER CLASS )MOHAN SRIVASTAVA (AN INDIAN NATIONAL), TRADING AS M/S. VIKAS SCIENTIFIC INDUSTRIES, WZ-133, RING ROAD, NARAINA, NEW DELHI /12/2012 GROVED GLASS JOINT WITH RING The Patent Office Journal 13/09/

33 DESIGN NUMBER CLASS )M/S CITIZEN UDYOG, ST. NO. 2, NIRMAL NAGAR, DUGRI ROAD, LUDHIANA (PUNJAB) INDIA AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS:- NARESH BEHL BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 26/03/2013 DESIGN NUMBER CLASS SEWING MACHINE 1)SCHNEIDER ELECTRIC INDUSTRIES SAS, 35, RUE JOSEPH MONIER, RUEIL-MALMAISON, FRANCE. 04/10/2012 REMOTE CONTROL DEVICE NUMBER DATE COUNTRY /04/2012 OHIM DESIGN NUMBER CLASS )PHARMAJET INC., 400 CORPORATE CIRCLE, SUITE N, GOLDEN, COLORADO 80401, UNITED STATES OF AMERICA, A DELAWARE CORPORATION 16/01/2013 NEEDLE-FREE SYRINGE NUMBER DATE COUNTRY 29/427,826 23/07/2012 U.S.A. The Patent Office Journal 13/09/

34 DESIGN NUMBER CLASS )BITZER KUEHLMASCHINENBAU GMBH, OF THE ADDRESS ESCHENBRUENNLESTRASSE 15, SINDELFINGEN, GERMANY 15/10/2012 VALVE FOR GAS NUMBER DATE COUNTRY /04/2012 EUROPEAN UNION DESIGN NUMBER CLASS )APPLE INC., 1 INFINITE LOOP, CUPERTINO, CA 95014, U.S.A., A CORPORATION INCORPORATED IN THE STATE OF CALIFORNIA 05/12/2012 CONNECTOR FOR ELECTRONIC DEVICE NUMBER DATE COUNTRY 29/424,257 08/06/2012 U.S.A. DESIGN NUMBER CLASS )LARSEN & TOUBRO LIMITED, AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT, 1956 OF L & T HOUSE, BALLARD ESTATE, MUMBAI , STATE OF MAHARASHTRA, INDIA 07/12/2012 ENERGY METER The Patent Office Journal 13/09/

35 DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM DESIGN NUMBER CLASS )JAYESHBHAI DINESHBHAI SOJITRA (ADULT, & INDIAN NATIONAL) PROPRIETOR OF BALAJI INDUSTRIES (INDIAN PROPRIETORSHIP CONCERN) HAVING PLACE OF BUSINESS AT : VIRANI AGHAT, OPP: MANGAL PAN STREET, BALAJI ESTATE, OPP: PAWAN INDUSTRIES RAJKOT-GUJARAT (INDIA) 13/12/2012 HANDLE DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS 24/01/2013 TOTAL BODY SHAVER NUMBER DATE COUNTRY /07/2012 OHIM The Patent Office Journal 13/09/

36 DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED, (AN INDIAN COMPANY), AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 20/03/2013 MIXER GRINDER DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED, (AN INDIAN COMPANY), AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 20/03/2013 PACKAGING FOR FAN DESIGN NUMBER CLASS )JASH INTERNATIONAL., (AN INDIAN SOLE PROPRIETORSHIP CONCERN), HAVING OFFICE AT SHED NO. DD, KHAN REAL ESTATE COMPOUND, NEAR SAEED FARM, NATIONAL HIGHWAY NO. 8, NEAR VASAI PHATA, VASAI (EAST), DIST-THANE, MAHARASHTRA, INDIA. WHOSE PROPRIETOR IS BHUPENDRA DHAKAD. (INDIAN NATIONAL) OF ABOVE ADDRESS 25/03/2013 CASSEROLES The Patent Office Journal 13/09/

37 DESIGN NUMBER CLASS )HNI TECHNOLOGIES INC., A CORPORATION ORGANIZED AND EXISTING UNDER THE LAWS OF THE STATES OF IOWA, UNITED STATES OF AMERICA, OF 408 EAST 2ND STREET, MUSCATINE, IOWA 52761, UNITED STATES OF AMERICA 23/11/2012 CHAIR NUMBER DATE COUNTRY 29/422,685 23/05/2012 U.S.A. DESIGN NUMBER CLASS )DR. SAJI DAS APPUKUTTAN (INDIAN NATIONAL), TC. 15/ HOUSE NO 46, M.P. APPAN NAGAR, VAZHUTHACADU, THYCADU.POST, TRIVANDRUM. PIN , KERALA, INDIA 28/01/2013 PORTABLE BIOGAS PLANT DESIGN NUMBER CLASS )BAJAJ AUTO LIMITED, AN INDIAN COMPANY, INCORPORATED UNDER THE COMPANIES ACT OF 1956, HAVING ITS PRINCIPAL PLACE OF BUSINESS AT NEW 2ND & 3RD FLOOR, KHIVRAJ BUILDING, NO. 616, ANNASALAI, CHENNAI , STATE OF TAMIL NADU, INDIA, AND REGISTERED OFFICE AT AKURDI, PUNE , STATE OF MAHARASHTRA, INDIA 01/03/2013 SPEEDOMETER ASSEMBLY FOR VEHICLE The Patent Office Journal 13/09/

38 DESIGN NUMBER CLASS )MINDA INDUSTRIES LIMITED., AN INDIAN COMPANY OF VILL. NAWADA FATEPUR, P.O. SIKANDERPUR BADDA, MANESAR, DISTT. GURGAON, HARYANA , INDIA 06/03/2013 HANDLE BAR SWITCH FOR VEHICLE DESIGN NUMBER CLASS )CHETAN CABLETRONICS PVT. LTD., 45, ANGOORI BAGH, JAMUNA BAZAR, DELHI , INDIA. (AN INDIAN COMPANY DULY REGISTERED UNDER THE COMPANIES ACT, 1956). 27/02/2013 PACKAGES FOR MOULDED CABLE DESIGN NUMBER CLASS )GEBERIT INTERNATIONAL AG SCHACHENSTRASSE 77, 8645 JONA, SWITZERLAND, A COMPANY OF SWITZERLAND 01/03/2013 COVER FOR A DRAIN NUMBER DATE COUNTRY /09/2012 WIPO The Patent Office Journal 13/09/

39 DESIGN NUMBER CLASS )THOMAS C. FORD, A CITIZEN OF U.S.A., C/O SHAPIRO & COMPANY, C.P.A., 9229 SUNSET BLVD., SUITE 607, LOS ANGELES, CA 90069, USA 14/06/2012 FRAGRANCE BOTTLE WITH CAP NUMBER DATE COUNTRY 29/408,565 14/12/2011 U.S.A. DESIGN NUMBER CLASS )LEXMARK INTERNATIONAL, INC. OF THE ADDRESS: 740 WEST NEW CIRCLE ROAD, LEXINGTON, KENTUCKY 40550, UNITED STATES OF AMERICA 12/09/2012 LASER PRINTER TONER CARTRIDGE DESIGN NUMBER CLASS )PANASONIC CORPORATION, A JAPANESE COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN OF 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 26/12/2012 REFRIGERATOR The Patent Office Journal 13/09/

40 DESIGN NUMBER CLASS )HITACHI APPLIANCES, INC., A JAPANESE CORPORATION OF 16-1, KAIGAN 1-CHOME, MINATO-KU, TOKYO, JAPAN 13/02/2013 REFRIGERATOR NUMBER DATE COUNTRY /10/2012 JAPAN DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM DESIGN NUMBER CLASS )LALJIBHAI PANCHABHAI ROKAD (INDIAN NATIONAL) PROPRIETOR OF SITARAM METAL (INDIAN PROPRIETORSHIP CONCERN) HAVING PLACE OF BUSINESS AT: 3, PATEL NAGAR, 80 FEET ROAD, OPP: PATEL TOOLS, RAJKOT GUJARAT (INDIA) 13/12/2012 HANDLE The Patent Office Journal 13/09/

41 DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS 24/01/2013 VACUUM CLEANER NUMBER DATE COUNTRY /07/2012 OHIM DESIGN NUMBER CLASS )MEMMINGER - IRO GMBH, OF JAKOB-MUTZ STRASSE, 7, DORNSTETTEN, GERMANY, A GERMAN COMPANY 27/11/2012 YARN FEED DEVICE NUMBER DATE COUNTRY /06/2012 GERMANY DESIGN NUMBER CLASS )LUMAX INDUSTRIES LIMITED, A COMPANY INCORPORATED UNDER THE LAWS OF THE REPUBLIC OF INDIA, HAVING ITS REGISTERED OFFICE AT B-85-86, MAYAPURI INDUSTRIAL AREA, PHASE-I, NEW DELHI , INDIA 29/01/2013 FOG LAMP FOR VEHICLES The Patent Office Journal 13/09/

42 DESIGN NUMBER CLASS )SOCCER INTERNATIONAL PRIVATE LIMITED, AN INDIAN COMPANY, BASTI, SHEIKH ROAD, JALANDHAR , PUNJAB, INDIA. 30/01/2013 BLADDER FOR BALL DESIGN NUMBER CLASS )JOPEX INDUSTRIES SDN. BHD., A MALAYSIAN COMPANY OF LOT 2826, JALAN SRI GAMBUT, OFF JALAN KEBUN, SEKSYEN 32, SHAH ALAM, SELANGOR DARUL EHSAN, MALAYSIA 27/02/2013 TAP NUMBER DATE COUNTRY /08/2012 MALAYSIA DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA, A JAPANESE CO., OF 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 17/12/2012 CAR NUMBER DATE COUNTRY /06/2012 JAPAN The Patent Office Journal 13/09/

43 DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD., AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT, 1913, OF GODREJ INTERIO, PLANT 4, PIROJSHANAGER, VIKHROLI (WEST), MUMBAI , INDIA 13/03/2013 CHAIR DESIGN NUMBER CLASS )UNIEK HYDRAULICS., (AN INDIAN SOLE PROPRIETORSHIP CONCERN), HAVING OFFICE AT 126-5/10, BEHIND REHMAT MASJID, REHMAT MASJID ROAD, GANESH NAGAR, KANDIVALI (WEST), MUMBAI , MAHARASHTRA, INDIA WHOSE PROPRIETOR IS KACHAPPILLY VARGHESE JOSEPH (INDIAN NATIONAL) OF ABOVE ADDRESS 26/09/2012 LANTERN DESIGN NUMBER CLASS )PHOENIX CONTACT GMBH & CO. KG, OF FLACHSMARKTSTR. 8, BLOMBERG, GERMANY, A GERMAN COMPANY 11/12/2012 ELECTRICAL CONNECTOR NUMBER DATE COUNTRY /06/2012 OHIM The Patent Office Journal 13/09/

44 DESIGN NUMBER CLASS )(1) MRS. SNEH MEHTA W/O. SH. VIRENDRA MEHTA, (NATIONALITY-INDIAN) (2) PRIYANK MEHTA S/O. SH. VIRENDRA MEHTA (NATIONALITY-INDIAN) (3) PARITOSH MEHTA S/O. SH. VIRENDRA MEHTA (NATIONALITY-INDIAN) PARTNERS OF TRUNKS COMPANY (AN INDIAN PARTNERSHIP FIRM) AT 44, KARTARPURA INDUSTRIAL AREA, BAIS GODOWN, JAIPUR (RAJ.) INDIA. 23/01/2013 HANDLE DESIGN NUMBER CLASS )CROMPTON GREAVES LIMITED, (AN INDIAN COMPANY), AVANTHA HOUSE, 6TH FLOOR, DR. ANNIE BESANT ROAD, WORLI, MUMBAI , MAHARASHTRA, INDIA 20/03/2013 LIGHTING FIXTURE DESIGN NUMBER CLASS )JEYANTIBHAI DAHYABHAI PIPALIYA (ADULT AND INDIAN NATIONAL) SOLE PROPRIETOR OF AVADH MANUFACTURE (INDIAN PROPRIETORSHIP CONCERN) HAVING PLACE OF BUSINESS AT: 1, PATEL NAGAR, NR. RAJARAM TEMPLE, KOTHARIYA MAIN ROAD, RAJKOT GUJARAT (INDIA) 10/01/2013 HANDLE The Patent Office Journal 13/09/

45 DESIGN NUMBER CLASS )AUDI AG, A JOINT STOCK COMPANY ESTABLISHED UNDER GERMAN LAW, OF INGOLSTADT, GERMANY. 10/01/2013 VEHICLE WHEEL RIM NUMBER DATE COUNTRY /07/2012 OHIM DESIGN NUMBER CLASS )EVEREADY INDUSTRIES INDIA LTD., 1, MIDDLETON STREET, KOLKATA , WEST BENGAL, INDIA, AN INDIAN COMPANY. 15/01/2013 LAMP DESIGN NUMBER CLASS )M/S V-GUARD INDUSTRIES LTD., AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT OF 1956 WHOSE ADDRESS IS 33/2905 F, VENNALA HIGH SCHOOL ROAD, VENNALA, KOCHI , KERALA STATE, INDIA 26/11/2012 BODY OF MIXER The Patent Office Journal 13/09/

46 DESIGN NUMBER CLASS )CHANGCHAI CO., LTD., A COMPANY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 37 HUAIDE ROAD (NORTH), CHANGZHOU, JIANGSU , PEOPLE S REPUBLIC OF CHINA, AND JIANGSU UNIVERSITY, A UNIVERSITY DULY ORGANIZED AND EXISTING UNDER THE LAWS OF PEOPLE S REPUBLIC OF CHINA OF 301 XUEFU ROAD, ZHENJIANG, JIANGSU , PEOPLE S REPUBLIC OF CHINA 05/02/2013 WATER TANK OF SINGLE CYLINDER DIESEL ENGINE NUMBER DATE COUNTRY /08/2012 CHINA DESIGN NUMBER CLASS )MIRC ELECTRONICS LIMITED, G-1, ONIDA HOUSE, MIDC, MAHAKALI CAVES ROAD, ANDHERI (EAST), MUMBAI , MAHARASHTRA, INDIA 01/03/2013 REMOTE CONTROLLER FOR AIR CONDITIONER DESIGN NUMBER CLASS )KNOLL, INC., A DELAWARE CORPORATION, 1235 WATER STREET, EAST GREENVILLE, PENNSYLVANIA 18041, UNITED STATES OF AMERICA. 16/11/2012 TABLE BASE NUMBER DATE COUNTRY 29/423,931 06/06/2012 U.S.A. The Patent Office Journal 13/09/

47 DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD., AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT, 1913, OF GODREJ INTERIO, PLANT 4, PIROJSHANAGER, VIKHROLI (WEST), MUMBAI , INDIA 01/03/2013 DESK DESIGN NUMBER CLASS )SUMITOMO RUBBER INDUSTRIES LTD. A COMPANY ORGANIZED UNDER THE LAWS OF JAPAN OF THE ADDRESS: 6-9, WAKINOHAMA-CHO 3-CHOME, CHUO-KU, KOBE-SHI, HYOGO , JAPAN 12/03/2013 TIRE FOR MOTORCYCLE DESIGN NUMBER CLASS )M/S. BIBA APPARELS PRIVATE LIMITED, AN INDIAN PRIVATE LIMITED COMPANY INCORPORATED UNDER THE PROVISION OF THE COMPANIES ACT, 1956, AND HAVING ITS S REGISTERED OFFICE AT RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 19/03/2013 TEXTILE FABRIC The Patent Office Journal 13/09/

48 DESIGN NUMBER CLASS )M/S CITIZEN UDYOG, ST. NO. 2, NIRMAL NAGAR, DUGRI ROAD, LUDHIANA (PUNJAB) INDIA AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS:- NARESH BEHL BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 26/03/2013 EMBROIDERY MACHINE The Patent Office Journal 13/09/

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART-1

CONTINUED FROM PART-1 CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office.

CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office.

CONTINUED FROM PART- 1 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo

More information

Kare Zindagi Instant Start

Kare Zindagi Instant Start Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)

Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor

More information

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015 Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN

More information

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

15K Series Extented Mini Right Angle Drill Attachment

15K Series Extented Mini Right Angle Drill Attachment Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature

More information

10LF and 12LF Series Right Angle Grinders

10LF and 12LF Series Right Angle Grinders Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right

More information

Product Manual PL31-15LF 04/02/ LF Series Inline Grinders

Product Manual PL31-15LF 04/02/ LF Series Inline Grinders Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10R90 Series Light Duty Precision Turbine Grinder

10R90 Series Light Duty Precision Turbine Grinder Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco

More information

75RM-2024 Right Angle Fixtured Nutrunner

75RM-2024 Right Angle Fixtured Nutrunner Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original

More information

10N10 Series Inline Grinder

10N10 Series Inline Grinder Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

You ll find many Tsubaki products being

You ll find many Tsubaki products being You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,

More information

High Accuracy Wire Electrical Discharge Machines

High Accuracy Wire Electrical Discharge Machines Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

15D Series Pistol Grip and Inline Drills

15D Series Pistol Grip and Inline Drills Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language

More information

Siddhi Vinayak. Engineers

Siddhi Vinayak. Engineers Siddhi Vinayak Engineers nd Office: Shop No. 9, Plot No. 146/2, II Phase, GIDC, Vapi -396195 Contact : Mr. Pratik Patel Mob. : +91 99984 72806 E-mail: siddhivinayakengineer@yahoo.com NBC Bearing National

More information

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION

More information

NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN SCIENCE & TECHNOLOGY INDUSTRIAL PARK, JIANGSU, VIA CAVALIERI DUCATI, BOLOGNA, REPUBLIC OF ITALY

NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN SCIENCE & TECHNOLOGY INDUSTRIAL PARK, JIANGSU, VIA CAVALIERI DUCATI, BOLOGNA, REPUBLIC OF ITALY 1 BMW AG BMW MOTORRAD AM JULIUSTURM 14-38, D-13599, BERLIN, FEDERAL REPUBLIC OF GERMANY Expiry R2350-16 29-Jun-2016 28-Jun-2019 2 CHANGZHOU HANDE ELECTRIC VEHICLE CO., TLD NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information