MACPAC REFUSE BODIES. Food Waste Vehicles.

Transcription

1 MACPAC REFUSE BODIES Food Waste Vehicles

2 General Description. MacPac Refuse Bodies Ltd have been working to extend the capability of the range of products offered & now includes Food Waste Vehicles that will assist both existing & new customers deal with the demands of the Food Waste Regulations in Northern Ireland and beyond. ( This means we can now offer Refuse Vehicle solutions that are capable of facilitating the safe & controlled collection / transport of food waste whilst offering key benefits such as: Varying Payload options from 2.5t 8t. Double Sealed Rear Door- reducing spillages & losses during collection & transport. Fully Enclosed Body allowing for safe & controlled collection / transport of waste. Enclosed Ejector Blade ensuring waste product is not trapped in body/ blade. Non Tipping Eject Procedure- enabling low mess during emptying & reducing spillages & splashback. 4 Ram Hydraulic Operation- assisting low maintenance & ease of operation. Manufactured using High Wear & High Corrosion Resistance Steel increasing vehicle service life. Plastic Waste Trap Plate- can be replaced easily during vehicle life, ensuring all waste is ejected. Bin Weighing & Vehicle Weighing options. Non Compaction Blade options.

3 MACPAC 65s SPECIFICATION MAKE AND TYPE CAPACITY MATERIAL OVERALL WIDTH OF VEHICLE MACPAC 65s 6.5 cubic metres High tensile steel A Metres HEIGHT OF VEHICLE 2.7 Metres (chassis dependant) COMPACTION RATIO 3:1 HOW IS COMPACTION CYCLE CONTROLLED Hydraulic pressure signal to return Solenoid operated hydraulic control HOW IS EJECTION CYCLE CONTROLLED Solenoid operated hydraulic control SAFETY FEATURES Fully interlocked on loading doors, bin lifter and tailgate LOCATION OF MANUAL LOADING Front near side and off side of body APERTURE LOADING Side loading body BIN LIFTER Manual lifter capable of lifting all bins up to 1100 litres HOPPER Fully enclosed hopper PAYLOAD Up to 2.7 TONNE (chassis dependant) Secondary rear door lock to ensure better seal Optional bin weighing system VWS

4 MACPAC 65s SPECIFICATION HIGH COMPACTION RATIO HELPING REDUCE COSTS Compaction ratio of 3:1 allows smaller body, lowers the centre of gravity, reducing wind drag in turn lower fuel costs and lower volume of waste to landfill UP TO 2.7 TONNE PAYLOAD ON 7.5 TONNE CHASSIS.(chassis dependant) BODY SIZE OF 6.5M 3 More collections per route HIGH COMPACTION FROM LOW REVS reducing engine wear AVERAGE 12 SECOND CYCLE PER BIN MULTIFUNCTIONAL Non- compaction mode at the touch of a button DESIGNED FOR MAXIMUM SAFETY Operatives work at side of vehicle clear from the rear impact zone and easily visible to driver at all times BUILT IN SAFETY FEATURES INCLUDING EASY LOAD EJECTION FROM CAB The loading doors cannot be opened while compaction is in operation, any attempt to do so stops the operation FULLY ENCLOSED HOPPER AND SEALED BODY Can also be used for food waste collections ROBUST DESIGN Made from high Grade A Steel spec steel

5 MACPAC 65s Dimensions: SPRINGFARM INDUSTRIAL ESTATE, ANTRIM, BT41 4NZ TEL:

6 MACPAC 110S REFUSE BODY

7 MACPAC 110s SPECIFICATION HIGH COMPACTION RATIO HELPING REDUCE COSTS Compaction ratio of 3:1, lowers the centre of gravity, reducing wind drag in turn lower fuel costs and lower volume of waste to landfill UP TO 5.5 TONNE PAYLOAD for 12 Ton Chassis.(chassis dependant) BODY SIZE OF 11M 3 More collections per route HIGH COMPACTION FROM LOW REVS reducing engine wear MULTIFUNCTIONAL Non- compaction mode at the touch of a button DESIGNED FOR MAXIMUM SAFETY Operatives work at side of vehicle clear from the rear impact zone and easily visible to driver at all times BUILT IN SAFETY FEATURES INCLUDING EASY LOAD EJECTION FROM CAB The loading doors cannot be opened while compaction is in operation, any attempt to do so stops the operation FULLY ENCLOSED HOPPER AND SEALED BODY Can also be used for food waste collections ROBUST DESIGN Made from high spec steel

8 MACPAC 110s SPECIFICATION MAKE AND TYPE CAPACITY MATERIAL OVERALL WIDTH OF VEHICLE MACPAC 110s 11 cubic metres High tensile steel Grade A Steel 2.3 Metres HEIGHT OF VEHICLE 3.3 Metres WHEEL BASE 3.8 Metres -4.3 Metres COMPACTION RATIO 3:1 HOW IS COMPACTION CYCLE CONTROLLED Adjustable timer for half pack Hydraulic pressure signal to return Solenoid operated hydraulic control HOW IS EJECTION CYCLE CONTROLLED Solenoid operated hydraulic control SAFETY FEATURES Fully interlocked on loading doors, bin lifter and tailgate LOCATION OF MANUAL LOADING Front near side and off side of body APERTURE LOADING Side loading body BIN LIFTER Manual lifter capable of lifting all bins up to 1100 litres HOPPER Fully enclosed hopper PAYLOAD (subject to chassis choice) UP TO 8.0 TONNE.(chassis dependant) Secondary rear door lock to ensure better seal Optional bin weighing system VWS

9 MACPAC 110s Dimensions: SPRINGFARM INDUSTRIAL ESTATE, ANTRIM, BT41 4NZ TEL:

10 CONTACT DETAILS Sales: Jason Stewart T: Service: Macpac refuse bodies Stewart Commercials Ltd 11 Springfarm Industrial Estate Antrim Bt41 4nz T: Tech Support: Drew Stewart T: T: Product/ Customer Feedback: Eoin Regan