Mobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction

Transcription

1 Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits

2 Mobile Crushing and Screening Features and Benefits

3 Hopper & Feeder

4 Tipping Grid Vibrating double deck grid option Operated and angled hydraulically Lock out pins for setting different angles depending on the application Enables for a quick set-up time Hopper Capacity 8m³

5 Feed Hopper The extension plates extend out to give a length of 4.95m The aperture between the fingers is 100mm Aperture options 150mm Each finger is free swinging

6 Tipping Grid Radio control for raising and lowering the tipping grid A timer is also available for raising and lowering the grid

7 Feed Belt Driven from flange mounted hydraulic motor & gear box assembly Heavy duty bed rollers Which prolongs the life of the belt 1050mm (42 ) belt width Set at a 10 this ensures of the optimum feed flow

8 Inlet Chute Option The F542 has the option of fitting a crusher inlet chute with a 12 Tipping grid. The Inlet chute is fitted with a hardox 400 plate. The initial third of the hopper is also fitted with a hardox plate. In the same area the belt protection plate is fitted with a standard 10mm plate.

9 Hydraulic Shredder Optional Hydraulic Shredder option Hydraulically raised & lowered Single shaft with 20mm hardox steel hammer Fixed blade

10 Main Product Conveyor The main conveyor belt is 1050mm wide (42 ) Extra high skirting plates to protect from bouncing & backward rolling material. Side skirting plates extend over material to give added security. The operator can hydraulically extend and retract the main conveyor for maximum screening efficiency Rosta belt scraper is kept tensioned on the conveyor belt at all times.

11 Wear Plates Hardox wear plates on middle & over size hopper of side conveyors. Hardox liners on spreader plate on oversize chute. Hardox liners on internal surface of belt feed hopper.

12 Screen

13 Screen Box 2 bearing screen box Bolted together Double deck screen Top deck size 3650 x 1500mm (12 x 5 ) Bottom deck size 3530 x 1500mm (11 x 5 ) with a in built 5 angle Heavy duty screen box with uniquely high throw and speed 990rpm shaft speed, Adjustable throw from 5 8mm Adjustable screen box angle from 24 35

14 Impact Plate And Internal Angle Hardox lined impact zone for prolonging the life of the screen mesh Unique build in 5 bottom deck screen box angle

15 Screen Mesh Piano wire/harp Square Mesh Elongated Polyurethane S-Harp/Diamond Punch Plate Rubber

16 Screen Access The screen box is surrounded by a maintenance walk way This gives the operator complete access to the screen The walkway can easily be raised and lowered

17 Screen Mounts The Screen box is mounted independently from the chassis On a set of springs These absorb the screens vibrations and stops any strain travelling thought the main chassis.

18 Plant Conveyors

19 Fines Conveyor Heavy duty chevron belt 1200mm (48 ) wide Discharge height of 3880mm (12-8¾ ) Hydraulically folding for transport & maintenance

20 Other Grading Size Conveyors Heavy duty chevron belt 650mm (26 ) wide Discharge height of 4150mm (13 7 ) High angle troughing rollers Side skirt system up to the first roller set, preventing material spillage Hydraulically folding for transport

21 Support Hinges Side conveyor support hinges are extra heavy for quarry applications. The most heavy duty hinges in the business!

22 Power Pack & Controls

23 Engine The QA330 is powered by a CAT4.4 engine developing 100HP ( rpm. The engine compiles with all current emission laws Average fuel consumption approximately L/H Easy access for maintenance via three canopy doors

24 Hydraulic Tank 630 litre hydraulic tank Multi stage filtration system to ensure all debris is removed on every cycle Filters located at the top of the unit for easy of maintenance

25 Hydraulic Components Simple On/Off type hydraulic control blocks Easy access for maintenance Direct driven high power and torque hydraulic pumps Powering the Crusher & Track Drives

26 Fuel Tank 400 litre (105 USG) Diesel Tank Optical diesel level gauge Heavy duty industrial size lockable filler cap

27 Manual Control levers Simple user friendly manual control levers for setup and operation Each function is clearly marked for ease of use The manual levers shown start and stop all the conveyors and screen box

28 Battery Electric isolation switch provided for safety when maintaining machine The oil cooler maintains optimum temperature.

29 Greasing All bearing have a grease line going to them so that the operator does not have to take off any guards. The other end on the grease line is attached to a grease nipple, which is centrally located to allow easy daily maintenance. These grease points can be found on a number of areas on the machine.

30 Fault Display Engine fault monitoring Hour meter Water Trap Filter (needs drained) Emergency Stop released Emergency Stop pressed Air cleaner blockage lamp Injection System Pre Heat Water temperature Oil Pressure lamp Charge lamp Ignition switch

31 Tracks

32 Tracks Hydraulically driven crawler track mounted for full site mobility. The full power of the engine is available for driving the tracks when needed. Length of 2920mm (9-5 ). Track Shoe Width 500mm (20 ). Bolted to the chassis for ease of maintenance

33 Tracking Umbilical Controller Tracking is possibly by either Wireless Radio Controller Wired Umbilical Each track can be operated independently for full site flexibility. Radio Controller

34 Transport Dimensions Standard machine Total weight,000kg

35 Working Dimensions

36 Sound levels

37 Galvanising All internal sliding box sections are galvanised to prevent rusting

38 Other Options

39 Options Summary Standard features Hopper Main conveyor Double screen box Folding walkways Wedge tensioning system CAT 4.4 Engine

40 Options Summary Available Options Double Deck Vibrating grid Radio controled tracks Side Conveyor Feed boot Hardox lined Hardox spreader plate Hopper Lined Hardox Plates Oversize chute Hardox lined Dust suppression including Canvas covers Working lights Wheeled dolly Remote diesel pump Water pump Available Options 12ft Grid & crusher feedbox Arctic package -20 C Arctic package -30 C Tropical Package Central Lube system Extra wedges for top deck screen Top deck rubber screening mats- 3 off Main conveyor lift rams Roll back flaps Weigh scales Dead box

41 Main Selling Features Large feed hopper with crusher inlet chute. Approx 20% more screening area than most of our competitors. A 5 degree inclined angle on screenbox giving you banana effect principle Larger throw on eccentric shaft than most of our competitors. CAT engine. Galvanised moving parts. Machine is very accessible for maintenance. Unit weight is 26 tonnes, which is up to 4 tonnes heavier than most of our competition. Oven baked paint finish with high quality 2-pack paint.