694+ Dual Power Supertrak
|
|
|
- Jayson Holland
- 5 years ago
- Views:
Transcription
1 R Dal Power Spertrak SPECIFICATION: Screen Size: 6100mm x 1530mm (20 x 5 ) Top, Middle & Bottom deck screenbox Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C hp (97kW) Tier 4i / Stage IIIB: Caterpillar C hp (98kW) Portability: Tracked Operating Weight: 40,000kg* (88,184 lbs*) *With tipping grid 167
2 SPECIFICATION HOPPER / FEEDER Hopper Capacity: 8m³ (10.5yd³) Feed height: 3.67m (12 ) Feed in width: 4.77m (15 8 ) (grid wing plates) Grid apertre: 100mm (4 ), 150mm (6 ) 10mm replaceable steel hopper liners Drive: Hydralic variable speed drive via high torqe gearbox Beltfeeder belt width: 1.2m (48 ) Belt Spec: Plain EP 630, 4 ply, 6 + 2mm covers. Speed: variable, 0-16 mpm (0-53 per min) Wide moth opening MAIN CONVEYOR Drive: Hydralic variable speed drive via high torqe 630cc motor Belt width: 1.2m (48 ) Belt spec: Plain 3 ply belt, EP400 Hydralic adjst Belt Speed: 92 mpm (302 per min) Steel skirted fll length of conveyor SCREEN BOX All decks: 6.1m x 1.53m (20 x 5 ) Wedge side tensioned top and middle deck mesh Hydralic end tensioned bottom deck mesh Drive: Hydralic heavy dty 2-Bearing Screen Angle: 18-30, hydralic adjst Screen stroke standard: 7.5mm (5/16") Screenspeed: 1000 rpm Abrasion resistant material impact plate Spreader plate Galvanised access catwalks on both sides and top end of screen Total screening area: 27.8m² (300ft²) SIDE CONVEYORS Drive: Hydralic variable speed drive via high torqe 500cc motor Belt width: 800mm (32 ) Belt spec: Chevron EP400, 3 ply Working Angle: 24 Speed: Variable speed, mpm (410 per min) Hydralic Folding Discharge Height: 4.71m (15 5 ) Stockpile capacity: 193m³ (252yd³) Hopper Vibrating Grid Conveyor - Middle Grade Conveyor - Oversize Pls 168 Conveyor - Oversize Mins
3 FINES CONVEYOR Drive: Hydralic variable speed drive via high torqe 800cc motor Belt width: 1.2m (48 ) Belt spec: Plain, 3 ply, EP400 Working Angle: Variable 25 (Max) Rosta scraper on head drm Speed: Not variable speed, 92mpm (302 per min) Standard Discharge Height: 5.2m (17 1 ) Stockpile capacity: 260m³ (340yd³) OVERSIZE PLUS CONVEYOR Drive: Hydralic variable speed drive via high torqe 500cc motor Belt width: 500mm (20 ) Belt spec: Chevron, EP 315, 3 ply Working Angle: Variable 22 (Max) Speed: variable speed, 120 mpm (400 per min) Discharge Height: Variable 4.8m (Max) Operating angle variable between 0º and 70º Stockpile capacity: 164.5m³ TRANSFER CONVEYOR Drive: Hydralic variable speed drive via high torqe 315cc motor Belt width: 500mm (20 ) Belt spec: Plain, EP 500, 3 ply Belt Speed: 125 mpm (410 per min) POWERUNIT AND HYDRAULICS Tier 3 / Stage IIIA: Caterpillar (C4.4) Engine Power: 130hp (97kW) Tier 4i / Stage IIIB: Caterpillar (C4.4) Engine Power: 131hp (98kW) Diesel Pmp 1: Triple 33cc/33cc/26cc Thefirst section drives either the (left) track or the main conveyor and transfer conveyor. The second section drives either the (right) track or split to drive the middle grade & oversize mins conveyor. The third section drives the belt feeder and oversize pls conveyor Diesel Pmp 2: Tandem 46cc/27cc The first section drives the Fines conveyor and screen. The second section operates the vibrating or tipping grid. ELECTRICAL SPECIFACTION 2 x 37 kw Motors ( Driving Hydralic Pmp ) Electric Pmp 1: Triple 51cc/36cc/36cc The first section drives main conveyor and transfer conveyor The second section drive the vibrating or tipping grid The third section drives the belt feeder and oversize pls conveyor Electric Pmp 2: Triple 51cc/36cc/36cc The first section is split to drive either the middle grade or the oversize mins conveyor The second & third section are Joined to power the Fines conveyor and Screen Fines Conveyor Hydralic Folding Oversize Pls Conveyor User Friendly Interface TANK CAPACITIES Hydralic Tank: 450 litres / 99 UK gal / 119 US gal Fel Tank: 336 litres / 74 UK gal / 88 US gal) UNDERCARRIAGE Shoe Width: 500mm (20") Sprocket Centres: 4.2m (13' 9") Speed: 0.8 km/h Gradeability: 32.6 Raking Angle:
4 STANDARD FEATURES Tier 3 / Stage IIIA Caterpillar C4.4 ATAAC - 4 cylinder diesel engine developing 130hp 2200 rpm Tier 4i / Stage IIIB - Caterpillar C4.4-4 cylinder diesel engine developing 131hp 2200 rpm 1.2m (48 ) wide variable speed belt feeder Hopper capacity: 8.0 m³ (10.5 yd³) m (14 ) wide. Complete with 10mm replaceable steel liners Remote control hydralic tipping reject grid c/w groser bars 4.25m x 100mm spacing (14 x 4 ) 6.1m x 1.52m (20 x 5 ) top, middle and bottom deck screenbox Hydralic tensioning (bottom deck screen mesh) Qick wedge tensioning - top deck and middle deck Galvanised access catwalks to both sides and arond top of screen 1.2m (48 ) wide belt on main conveyor & 1.2m (48 ) wide fines belt 500mm (20 ) wide chevron belt on oversize pls prodct conveyor 500mm (20 ) wide plain belt on transfer conveyor 800mm (32 ) wide chevron belt on oversize mins and middle grade side conveyors Skirting on main conveyor Heavy dty ndercarriage nit with 500mm wide tracks Control operation of tracks via hand-held set with 5m connection lead with heavy dty sqare connector Safety gards in compliance to Machinery Directive OPTIONAL EQUIPMENT No grid bt with hopper deadplate fitted Doble deck vibrating grid c/w abbrasion resistant plate on wear srface of T Bars top dk and mesh in bottom deck (incldes hopper inlet chte as standard) Remote control hydralic tipping reject grid c/w grooser bars 3.65m x 100mm spacing (12 x 4 ) and hopper inlet chte Top deck mesh Middle deck mesh Bottom deck mesh/ speedharp Alminim Rapid-Fit dst covers on main and fines belt Dst sppression system on fines belt Oversize Pls conveyor c/w 2.2m extension for recirc Radio Remote control of tracks 1nr Standard stockpiler drive - Approx 30 litres/min (only available when no vibrating grid fitted) OR Qad Pmp option for 1nr dedicated Stockpiler Drive - Approx 70 Litres/min Working lights on powernit and main conveyor 68 grade hydralic oil Special paint color (if different from Terex MPE White RAL 1013 or Finlay Orange RAL 2002). RAL mst be specified on order 2 x37kw IE2 electric motors c/w hydralic gear pmps and electrical control panel allowing machine to rn in either Diesel or Electric mode Low level central greasing & emergency stops (4) R 170
5 Oversize Pls Coneyor Drive: Hydralic variable speed drive via high torqe 500cc motor Belt width: 500mm (20 ) Belt spec: Chevron, EP 315, 3 ply Working Angle: Variable 22 (Max) Speed: variable speed, 120 mpm (400 per min) Discharge Height: Variable 4.8m (Max) Stockpile capacity: 164.5m³ Hopper / Feeder Hopper Capacity: 8m³ (10.5yd³) Feed height: 3.67m (12 ) Feed in width: 4.77m (15 8 ) (grid wing plates) Grid apertre: 100mm (4 ), 150mm (6 ) 10mm replaceable steel hopper liners Drive: Hydralic variable speed drive via high torqe gearbox Beltfeeder belt width: 1.2m (48 ) Belt Spec: Plain EP 630, 4 ply, 6 + 2mm covers. Speed: variable, 0-16 mpm (0-53 per min) Wide moth opening Screen box All decks: 6.1m x 1.53m (20 x 5 ) Wedge side tensioned Top and Middle Deck mesh Hydralic end tensioned Bottom deck mesh Drive: Hydralic heavy dty 2-Bearing Screen Angle: 18-30, hydralic adjst Screen speed: 1000 rpm Screen stroke standard: 7mm (45/64 ) Abrasion resistant material impact plate Spreader plate Galvanised access catwalks on both sides and top end of screen Total screening area: 27.8m² (300ft²) Main conveyor Drive: Hydralic variable speed drive via high torqe 630cc motor Belt width: 1.2m (48 ) Belt spec: Plain 3 ply belt, EP400 Hydralic adjst Belt Speed: 92 mpm (302 per min) Steel skirted fll length of conveyor Power nit Fines conveyor Oversize / Middle grade conveyors Drive: Hydralic variable speed drive via high torqe 500cc motor Belt width: 800mm (32 ) Belt spec: Chevron EP400, 3 ply Working Angle: 24 Speed: variable speed, mpm (410 per min) Hydralic Folding Discharge Height: 4.71m (15 5 ) Stockpile capacity: 193m³ (252yd³) Tier 3 / Stage IIIA: Caterpillar (C4.4) Engine Power: 130hp (97kW) Tier 4i / Stage IIIB: Caterpillar (C4.4) Engine Power: 131hp (98kW) Drive: Hydralic variable speed drive via high torqe 800cc motor Belt width: 1.2m (48 ) Belt spec: Plain, 3 ply, EP400 Working Angle: Variable 25 (Max) Rosta scraper on head drm Speed: variable speed, 92 mpm (302 per min) Standard Discharge Height: 5.2m (17 1 ) Stockpile capacity: 260m³ (340yd³) 694+ Electrical Specification 2 x 37 kw Motors (Driving Hydralic Pmp) Engine Speed: 1500 rpm Undercarriage Shoe Width: 500mm (20 ) Sprocket Centres: 4.2m (13 9 ) Speed: 0.8 km/h Gradeability: 32.6 Raking Angle: 9 171
6 Transport Dimensions 19.36m (63 6 ) 3m (9 10 ) Working Dimensions 19.6m (64 4 ) 17.9m (58 8 ) 7.0m (23 1 ) 3.58m (11 9 ) MACHINE WEIGHT: 40,000kg (88,184lbs) R 172
INCLINED SCREEN SPECIFICATIONS: Screen Size: Net Engine Power: Tier 3 / Stage 3A: CAT (4.4 ATAAC) Portability:
R 674 674 INCLINED SCREEN SPECIFICATIONS: Screen Size: Net Engine Power: Tier 3 / Stage 3A: CAT (4.4 ATAAC) Engine Power: 98.1kW (131hp) Tier 4F / Stage IV: CAT (4.4 ATAAC) Engine Power: 82kW (110hp) Tier
Supertrak SPECIFICATION:
R 683 683 Spertrak SPECIFICATION: Screen Size: 3660mm x 1520mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 111.3hp (83kW) Tier 4i / Stage IIIB: Caterpillar C4.4-110hp (82kW) Portability:
694+ Supertrak 694+ SPECIFICATION:
R Supertrak SPECIFICATION: Screen Size: 6100mm x 1530mm (20 x 5 ) Top, Middle & Bottom deck screenbox Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 97kW (130hp) Tier 4i / Stage IIIB: Caterpillar
873 Heavy Duty Screener
R 873 873 Heavy Dty Screener preliminary specification SPECIFICATION: Screen Size: 3660mm x 1530mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 83kW (111.3hp) Tier 3 / Stage IIIA:
6 SERIES MOBILE DECK DECK INCLINED SCREENS
6 SERIES MOBILE 663 683 684 2-DECK 684 3-DECK 693+ 694+ INCLINED SCREENS 663 Finlay 663 combines the functions of scalping, screening and stockpiling into the one integrated mobile unit. Its rugged design
J-1175 Dual Power Jaw Crusher
R J-1175 J-1175 Dal Power Jaw Crsher SPECIFICATION: Inlet Opening: 1070mm x 760mm (42 x 30 ) Net Engine Power: Tier 2 / Stage II Eqivalent: Scania DC9 350hp (257kW) Tier 4F / Stage IV: Scania DC9 350hp
J-1160 J-1175 J JAW CRUSHERs
R J-1160 J-1175 J-1480 JAW CRUSHERs FINLAY J-1160 The Terex Finlay J-1160 is a compact and aggressive tracked mobile primary jaw crsher. Incorporating a Terex Jaqes JW40 jaw crsher a heavy dty vibrating
I-130 Impact Crusher
R I-130 I-130 Impact Crusher SPECIFICATION: Rotor Size: Ø1270 x 1219mm Ø50 x 48 Net Engine Power: 328kW 440 HP Portability: Tracked Operating Weight: 49,000 kgs* 108026 lbs* *Note: Without one by-pass
PRODUCT SPECIFICATION TRS 550 RECYCLING SCREEN.
PRODUCT SPECIFICATION TRS 550 RECYCLING SCREEN www.terex.com/ecotec THE ULTIMATE RECYCLING SCREEN The TRS 550 is the ultimate screening machine for difficult applications. The robust 3 way split machine
I-140 Impact Crusher SPECIFICATION:
R Impact Crusher SPECIFICATION: Rotor Size: Ø1270mm x 1220mm (Ø50 x 48 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C15 C-15 540hp (403kW) Tier 4i / Stage IV: SCANIA DC-13 500Hp (373kW) Portability:
Powerscreen Chieftain 1700S 3 Deck Incline Screen. Specification - Rev 5. 01/01/2013
Powerscreen Chieftain 1700S 3 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 27,500kgs (60,627lbs)* 29,800kg (65,698lbs)* Transport Length 16.81m
SOUTHEAST CRUSH & SCREEN LLC
SOUTHEAST CRUSH & SCREEN LLC 615-289-9890 WWW.SECRUSHANDSCREEN.COM SPECIFICATIONS 640 MOBILE SCALPING SCREEN General The is a heavy duty scalping screen designed to work in tandem with our Fintec 1107
Powerscreen Chieftain Deck Incline Screen. Specification - Rev /01/2017
2 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 22,000kg (48,502lbs)* 24,900kg (54,895lbs)* Transport Length 16.95m (55 7 ) 15.4m (50 6 ) Width
A TEREX BRAND. Technical Specification. COLT 800 SCREEN 2 Deck Incline Screen
A TEREX BRAND Technical Specification COLT 800 SCREEN 2 Deck Incline Screen SPECIFICATION Total weight: 16,700Kg (36,817lbs) depending on machine specification TRANSPORT Length: 9.22m (30 3 ) Width: 2.5m
Powerscreen Chieftain 2100X
Powerscreen Chieftain 2100X 3 Deck Incline Screen Specification - Rev X. 8. 16/05/2011 01/01/2015 Specification 14ft Hopper (with grid) track 14ft Hopper (with DDVG) track Total weight 37,400kg (82,453lbs)*
R R J-1480 JAW CRUSHER
R R J-1480 JAW CRUSHER Power, Performance & Profitability... Introducing the new J-1480 the largest Jaw Crusher in the Terex Finlay crushing range. The J-1480 is fitted with a Terex Jaques 1370mm x 762mm
Powerscreen Warrior Deck Heavy Duty Incline Screen. Specification - Rev /01/2017
Powerscreen Warrior 2400 2 Deck Heavy Duty Incline Screen Specification Three Way Split Two Way Split Total weight 46,200kg ( 101,853lbs)* 43,000kg (94,779 lbs)* Transport Length 17.3m (56 10 ) 17.2m (56
R R J-1175 JAW CRUSHER
R R J-1175 JAW CRUSHER Efficiency, Versatility Performance... The Terex Finlay J-1175 is fitted with a 1070mm x 760mm (42" x 30") Jaques crusher chamber and a heavy-duty undercarriage for exceptional on
M 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
M 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
Powerscreen Commander 1400
2 Deck Incline Screen Specification 14ft Hopper (tipping grid) 14ft Hopper (with DDVG) Total weight 20,200kg (44,440 lbs)* 22,660kg (49,852 lbs)* Transport Length 13.5m (44 3 ) 13.28m (43 7 ) Width 2.72m
Powerscreen H Deck Horizontal Screen. Specification- Rev /01/2017
3 Deck Horizontal Screen Specification- Rev 10. 01/01/2017 Specification Belt Feeder Total weight 46,700kg (102,955lbs)* Transport Length 19.6m (64 3 ) Width 3.2m (10 6 ) Height 3.6m (11 10 ) Working Length
Powerscreen Powertrak 750. Scalping Screen. SPECIFICATION - Rev 3. 01/01/2017
Scalping Screen SPECIFICATION - Rev 3. 01/01/2017 Specification Powertrak 750 Total weight 19,000kg (41,890lbs) Transport Length 9.43m (31 ) Width 2.82m (9 3 ) Height 3.2m (10 6 ) Working Length 10.5m
SPECIFICATIONS. McCloskey S190 3-Deck S190 3D. May 2012, issue 004 DISTRIBUTOR FOR AFRICA
S190 3D SPECIFICATIONS McCloskey S190 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: S190 3D 20x5 heavy duty high energy 2 bearing 3 deck screenbox. 125Hp Cat engine. Track or wheel
Mobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feeder Tipping Grid Vibrating double deck grid option Operated
R70 June. 2009, rev 002 SPECIFICATIONS. McCloskey R70. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R70 1 DESCRIPTION Heavy duty mobile screener with following features: - 9x4 heavy duty high energy 2 bearing screenbox. - 63Kw (84Hp) JCB 444 diesel engine. - Track mobile. - Direct
McCloskey S190 3-Deck
SPECIFICATIONS McCloskey S190 3-Deck 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing 3 deck screenbox. - 125Hp Cat engine. - Track or wheel mobile.
m 2100 washplant SYSTEMS WASHING Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products
WASHING SYSTEMS TECHNICAL SPECIFICATION m 2100 washplant FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
R105 April. 2009, issue 004 SPECIFICATIONS. McCloskey R105. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R105 1 DESCRIPTION Heavy duty mobile screener with following features: - 12x4.5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat diesel engine. - Track mobile. - Direct
QA451 TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS. Rev
TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS Rev 1 09-01-15 Feed hopper Tipping grid Screenbox Main conveyor Engine Tracks Dimensions Standard features Options Benefits overview 2 FEED CONVEYOR 1200mm
S190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 SPECIFICATIONS McCloskey S190 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp Cat engine. - Track or wheel mobile. - Integrated
WARRIOR 1800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE WARRIOR 1800
Powerscreen 1000SR. Cone Crusher. SPECIFICATION - Rev
Cone Crusher Specification Total weight 1000SR 38,500kg (84,900lbs) Transport Length 16.9m (55 5 ) Width 3.1m (10 2 ) Height 3.45m (11 4 ) Working Length 16.9m (55 5 ) Crusher type: Powerunit: Width 3.1m
PRODUCT SPECIFICATION TTS 620 TROMMEL.
PRODUCT SPECIFICATION TTS 620 TROMMEL www.terex.com/ecotec THE ULTIMATE IN TROMMEL DESIGN Terex Ecotec's TTS 620 is the ultimate in modern trommel design, offering operators unrivalled application flexibility,
M 1400 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1400 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 4 end products Quick set up time Ideally
i44r Jul. 2012, issue 001 SPECIFICATIONS McCloskey i44r All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i44r 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1050mm (42") diameter x 1100mm (43") wide Impactor. - 350Hp Cat C9 engine. - Track or Track c\w Wheel
700i TECHNICAL SPECIFICATION. MOBILE JAW CRUSHER With CAT C9 Engine. Technical Specification CRUSHERS. SCREENERS. BULK HANDLING
700i MOBILE JAW CRUSHER With CAT C9 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self-Contained Mobile Jaw Crusher with the following features: 300Hp CAT C9 Tier III Diesel
Powertrack 800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
SPECIFICATIONS. McCloskey S130 3-Deck S130 3D. Oct. 2013, issue 002 DISTRIBUTOR FOR AFRICA
SPECIFICATIONS McCloskey S130 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: - 14x5 heavy duty high energy 2 bearing 3 deck screenbox. - 100Hp Cat engine. - Track or wheel mobile.
WARRIOR 1800 JACK UP SCREENBOX
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.com INTRODUCING THE WARRIOR 1800
S130 Nov. 2006, issue 005 SPECIFICATIONS. McCloskey S130. All specifications are current as of this printing, but are subject to change
S130 SPECIFICATIONS McCloskey S130 1 DESCRIPTION Heavy duty mobile screener with following features: - 14x5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat engine. - Track or wheel mobile. - Integrated
S190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 Nov. 2006, issue 006 SPECIFICATIONS McCloskey S190 1 Nov. 2006, issue 006 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp
CRUSHING & SCREENING SOLUTIONS
CRUSHING & SCREENING SOLUTIONS A DYNAMIC GLOBAL BUSINESS A FOUNDATION OF STRENGTH Terex Finlay was fonded over 59 years ago and is a recognized global pioneer in the manfactre of mobile crshing and screening
Ecotec PRODUCT SPECIFICATION. Environmental Equipment TROMMEL TTS 620
Environmental Equipment Ecotec PRODUCT SPECIFICATION TROMMEL TTS 620 THE ULTIMATE IN TROMMEL DESIGN Terex Environmental Equipment s new TTS 620 is the ultimate in modern Trommel design, offering operators
Tel: Fax: INTRODUCING THE. Commander 510
Sales & Rentals LLC 11901 Westport Rd, Louisville, KY 40245 Tel:502 326 9300 Fax:502 326 9305 Email:sales@powerscreensales.com INTRODUCING THE FEATURES Total weight Width (transport) 2.47m (8' 1") Length
Powerscreen 1500 Maxtrak
Powerscreen 1500 Maxtrak Cone Crusher Specification 1500 Maxtrak Total weight 89,000kg (196,211bs) Transport Length 22.0m (72 6 )* Width 3.5m (11 6 )* Height 3.85m (12 8 )* Working Length 23.9m (79 9 )
CONE CRUSHER CRUSHER OPTIONS MAXIMUM FEED SIZE
CONE CRUSHER Crusher type: Liners: Standard concave: Adjustment: Control: Concave options: Eccentric option: 1000 Automax Crusher fitted with long throw eccentric. Manganese steel alloy mantle and concave.
4242SR SPECIFICATION IMPACT CRUSHER APPLICATIONS. Above photograph features a 4242SR fitted with the optional side conveyor and magnet
Above photograph features a 4242SR fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine
UJ440I HD JAW CRUSHER FEATURES & BENEFITS. Rev
HD JAW CRUSHER FEATURES & BENEFITS Rev 1 02-12-14 MODELS AVAILABLE Comfort - standard grizzly feeder Trend - pan feeder and live pre screen Classic - standard grizzly feeder and live under screen 2 Hopper
Product presentation. Lokotrack ST3.8 mobile screen
Product presentation Lokotrack ST3.8 mobile screen 1 Metso Minerals ST3.8 Product Presentation ST458 product presentation ST3.8 Technical specifications - Transport dimensions Dimension Metric English
Powerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight 27,800kg (61,288lbs) Transport Length 13.12m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m (42 9 ) Width 3.87m (12 6 ) with dirt
AggreSand 206 SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES
WASHING SYSTEMS TECHNICAL SPECIFICATION AggreSand 206 FEATURES 3 Aggregates, 2 Sand, 1 Machine Fully Modular Fully Automated Radio Controlled 5 x 40' Containers & 1 40' Flat Rack Pre Wired & Pre Plumbed
Terex. MPS Conveyors Exceptional Productivity and Efficiency. A world working better
Terex MPS Exceptional Productivity and Efficiency A world working better TC-65-T Tracked TC-65-T TC-65-T Tracked TC-65-T Options Equipment Length: 20m Diesel Hydraulic Deutz TD 2.9 L04 45kW (60hp) Tier
J45 Nov. 2015, issue 003 SPECIFICATIONS. McCloskey J45. All specifications are current as of this printing, but are subject to change
J45 SPECIFICATIONS McCloskey J45 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1140 (45 ) x 688 (27 ) single toggle jaw. - 350Hp C9 / C9.3 Cat engine. - Track or Track c\w Wheel
AggreSand 165 SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES
WASHING SYSTEMS TECHNICAL SPECIFICATION AggreSand 165 FEATURES 3 Aggregates, 2 Sand, 1 Machine Fully Modular Fully Automated Radio Controlled Containerised Transport Pre Wired & Pre Plumbed 1 Electrical
AggreSand SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES
WASHING SYSTEMS TECHNICAL SPECIFICATION AggreSand FEATURES 3 Aggregates, 2 Sand, 1 Machine Fully Modular Fully Automated Radio Controlled Containerised Transport Pre Wired & Pre Plumbed 1 Day Set-Up 1
AggreSand SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES
WASHING SYSTEMS TECHNICAL SPECIFICATION AggreSand FEATURES 3 Aggregates, 2 Sand, 1 Machine Fully Modular Fully Automated Radio Controlled Containerised Transport Pre Wired & Pre Plumbed 1 Day Set-Up 1
Technical Specification
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
i54 Sept. 2009, issue 006 SPECIFICATIONS McCloskey i54 All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i54 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - Universal 1200mm (47") diameter x 1350mm (53") wide Impactor. - 430Hp C13 Cat engine. - Track or Track
Barford SR124 Screener Barford SR124 Screener Visit our website for full inventory
WWW.BARFORD.COM Barford SR124 Screener Barford SR124 Screener Barford SR124 Heavy Duty 3 Way Split Screen, 12 x 4 2 (3.66m x 1.28m) Screenbox, CAT 4.4 (56kw/75hp), Remote Control Movement, Fits in 40Ft
Turbo Chieftain 1800
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Turbo Chieftain
J50 Nov. 2009, issue 000 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
Powerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight Tier 3: 28,100kg (61,949lbs) Tier 4F: 29,250kg (64,485lbs) Transport Length 13.1m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m
CRC450X PORTABLE CONE PLANT
Terex Minerals Processing Systems Cedarapids CRC450X CRC450X PORTABLE CONE PLANT Unit shown with the following options: right-hand feed conveyor; 45' (13,716 mm) undercrusher conveyor; oversized quick
Powerscreen Premiertrak 300. Jaw Crusher. SPECIFICATION - Rev 0. 01/02/2017
Powerscreen Premiertrak 300 Jaw Crusher SPECIFICATION - Rev 0. 01/02/2017 Powerscreen Premiertrak 300 Specification Premiertrak 300 Total weight 35,000kg (77,161lbs) *including magnet & dirt conveyor.
QJ331 Jaw Crusher Features & Benefits Revision
QJ331 Jaw Crusher Features & Benefits Revision 03 08-09-2014 1 Sandvik Mobiles Hopper Feeder Crusher Main Conveyor Controls Engine Tracks Options Benefits Overview 2 Sandvik Mobiles Hopper 2505mm x 4500mm
623CT. TECHNICAL SPECIFICATION Subject to change without notice.
623CT MOBILE IMPACT CRUSHER with CAT C9-T3 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self Contained Mobile Impact Crusher with the following features: 275Hp CAT C9 Tier
QS331 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty hopper sides 5m³ / 6.5yd³ nominal
POWERSCREEN SCREENING PRODUCT RANGE
POWERSCREEN SCREENING PRODUCT RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
Powerscreen Premiertrak 300. Jaw Crusher. SPECIFICATION - Rev 4. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 4. 01/01/2015 Specification Premiertrak 300 Total weight 35,180kg (77,558lbs) *including magnet & dirt conveyor. Transport Length 14.6m (47 11 ) Width 2.55m (8 5 ) Height
J50 Apr. 2011, issue 006 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
A TEREX BRAND. Technical Specification. COBRA 260R Horizontal Impact Crusher
A TEREX BRAND Technical Specification COBRA 260R Horizontal Impact Crusher PRINCIPAL COMPONENTS OF THE EVOQUIP COBRA IMPACT CRUSHER PRINCIPLES OF OPERATION Material enters via the crusher opening & slides
POWERSCREEN SCREENING RANGE
POWERSCREEN SCREENING RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
Trommel 615 LL INTRODUCING THE. Powerscreen Ltd. Lower Main Street, Kilbeggan, Co. Westmeath, Ireland
Powerscreen Ltd. Lower Main Street, Kilbeggan, Co. Westmeath, Ireland Tel: 00 353 506 32178 / 32203 Fax: 00 353 506 32443 Email: powerscreenltd@tinet.ie INTRODUCING THE Trommel 615 LL Trommel 615 LL JAN.
Uses one power source to run a complete crushing operation and three auxiliary outlets.
Dimensions RDS-20 Easy to move, Simple to operate, Quick to set-up and Ideal for boosting productivity, the RDS-20 unit increases production by up to 20 percent by splitting oversized material to return
Horizontal Impactor. SPECIFICATION - Rev 1. 19/10/09
Horizontal Impactor SPECIFICATION - Rev 1. 19/10/09 The Powerscreen Pegson XH320 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world class range of tracked machines.
POWERSCREEN SCREENING RANGE
POWERSCREEN SCREENING RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
Powerscreen Trakpactor 320SR Horizontal Impactor. Specification - Rev 6. 01/01/2017
Horizontal Impactor Specification - Rev 6. 01/01/2017 Specification Trakpactor 320SR Total weight VGF 46,240kg (101,941lbs)* Total weight PS 48,600kg (107,144lbs)* Transport Length 17.58m (57 8 )* Width
Powerscreen 1300 Maxtrak Cone Crusher
Cone Crusher Specification 1300 Maxtrak Total weight Tier 3: 48,020kg (105,865lbs) (No Options) Tier 4F: 47,880kg (105,557lbs) (No Options) Transport Length 15.35m (50 4 ) Width 3.0m (9 10 ) Height 3.85m
QH331 CONE CRUSHER FEATURES & BENEFITS. Rev Rev
CONE CRUSHER FEATURES & BENEFITS Rev 2 23-03-15 Rev 1 01-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Standard features Options Benefits overview 2 HOPPER DOORS Heavy
428 TRAKPACTOR SPECIFICATION
Above photograph features a 428 Trakpactor fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact
428 TRAKPACTOR SPECIFICATION
IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine pulley: Maximum feed size: Impactor speeds: Lubrication: APPLICATIONS 428 Fixed
POWERSCREEN SCREENING RANGE
POWERSCREEN SCREENING RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
Powerscreen Premiertrak 400X & R400X. Jaw Crusher. SPECIFICATION - Rev 0. 23/03/2017
Powerscreen Premiertrak 400X & R400X Jaw Crusher SPECIFICATION - Rev 0. 23/03/2017 Specification Total weight Premiertrak 400X Tier 3: 46,300kg (102,274lbs) including side conveyor & magnet Tier 4F: 46,500kg
Superior Guardian 6x20 3-Deck Tandem Screen Plant, Unit #838
Superior Guardian 6x20 3-Deck Tandem Screen Plant, Unit #838 #1036872 Carrier chassis Main frame constructed of wide flange structural steel beams Split Quad axle with (16) 11x22.5 radial tires, 4' - 8'
Powerscreen Premiertrak 400 / R400 Pre-Screen Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2015 Specification 400 Pre-Screen R400 Pre-Screen Total weight 48,220kg (106,306lbs)* 48,420kg (106,747lbs)* Transport Length 15.4m (50 6 ) 15.4m (50 6 ) Width
A TEREX BRAND COMPACT CRUSHING & SCREENING EQUIPMENT
A TEREX BRAND COMPACT CRUSHING & SCREENING EQUIPMENT A TEREX BRAND EvoQuip offers a comprehensive range of crushing and screening products to suit a wide variety of industries. The EvoQuip range starts
Increased fine screening capacity
maskin mekano Increased fine screening capacity o you need to boost your screening capacity of fines? The Maskin Mekano screens are designed for Scandinavian conditions. The combination of an aggressive
Powerscreen Trakpactor 260
Powerscreen Trakpactor 260 Horizontal Impactor Powerscreen Trakpactor 260 Specification Total weight Trakpactor 260 Standard 27,000kg (59,525lbs) including side conveyor and magnet Transport Length 13.40m
Electric Drive Jaw Crusher
Electric Drive Jaw Crusher SPECIFICATION - Rev 2. 01/01/2017 Specification Total weight Premiertrak 600E 73,725kg (162,535lbs) including magnet & dirt conveyor. Transport Length 17.1m (56 1 ) Width 3.12m
Powerscreen Trakpactor 320 Horizontal Impactor. SPECIFICATION - Rev
Horizontal Impactor Specification Trakpactor 320 Total weight VGF 35,280kg (77,779lbs)* Total weight PS 38,160kg (84,128lbs)* Transport Length 14.78m (48 6 ) * Width 2.55m (8 4 ) * Height 3.46m (11 4 )
Company Product Portfolio Proven Performance
Company Product Portfolio Proven Performance www.mccloskeyinternational.com Company Profile Proven Performance Since 1985 Today McCloskey International leads the screening and crushing industry with a
Powerscreen Premiertrak 600. Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2017
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2017 Specification Premiertrak 600 Total weight 68,875kg (151,843lbs) including magnet & dirt conveyor. Transport Length 17.1m (56 1 ) Width 3.0m (9 10 ) Height
Smarter Washing Solutions S130 RINSER
Smarter Washing Solutions RINSER Mobile Wash Range Choose MWS to help you find a smarter solution for your washing needs McCloskey Washing Systems (MWS), a division of McCloskey International, provides
designengineeringinnovation
EDGE TR622 TROMMEL SERIES designengineeringinnovation SMART, PRECISE & EFFICIENT... PRODUCT HIGHLIGHTS KEY HIGHLIGHTS FUEL CONSUMPTION 12-15 LTR/HR LITRES (3-4 USG) PER HOUR The most fuel efficient Trommel
QS441 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty fixed hopper design enables
PRODUCT SPECIFICATION CONVEYOR RANGE
PRODUCT SPECIFICATION CONVEYOR RANGE www.terex.com/ecotec TSC 65T & TSC 80T Terex Ecotec s range of mobile conveyors are designed to work in conjunction with the existing Ecotec product portfolio. Using
PRODUCT RANGE WASHING SYSTEMS
PRODUCT RANGE WASHING SYSTEMS 3 Contents Application Expertise / Automation & Control 2-3 Modular Range Aggresand 4-5 Aggwash Range Aggwash 60-1 / 60-2 6-7 Mobile Range M Range M 084 8-9 M 390 10-11 M
Powerscreen Premiertrak 400 & R400. Jaw Crusher. SPECIFICATION - Rev 6. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 6. 01/01/2015 Specification Premiertrak 400 Total weight 45,260kg (99,781lbs) including magnet & side conveyor Transport Length 15.2m (49 10 ) Width 2.8m (9 2 ), 4.3m (14
TECHNICAL DESCRIPTION. Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1)
TECHNICAL DESCRIPTION Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1) to dimension sheet No. 42 1534 49 A. General technical data 001 Application Feed material: Throughput