J-1160 J-1175 J JAW CRUSHERs

Size: px

Start display at page:

Download "J-1160 J-1175 J JAW CRUSHERs"

Natalie Rogers
6 years ago
Views:

1 R J-1160 J-1175 J-1480 JAW CRUSHERs

applications. Its compact size, qick set p times, ease of transport and simple maintenance make the Finlay J-1160 ideal for small to medim sized operators.

2 FINLAY J-1160 The Terex Finlay J-1160 is a compact and aggressive tracked mobile primary jaw crsher. Incorporating a Terex Jaqes JW40 jaw crsher a heavy dty vibrating grizzly and an integrated prescreen system the Finlay J-1160 gives optimm prodction in qarrying, mining, demolition and recycling applications. Its compact size, qick set p times, ease of transport and simple maintenance make the Finlay J-1160 ideal for small to medim sized operators. Standard Featres Engine: Caterpillar C9 Acert 224 kw (300hp) water cooled diesel engine Jaw Chamber: Jaqes 1000 x 600mm (40 x 24 ) single toggle jaw crsher Hydrostatic drive and advanced electronic control system Flly hydralically adjstable closed side setting Reversible operation for clearing blockages S-Tooth liners as standard Hopper/Feeder 5m³ hopper (6.5 yd³) Heavy dty vibrating feeder Grizzly feeder with integral pre-screen, standard 50mm spacing Selectable discharge to by-pass conveyor or main conveyor Mesh apertre on grizzly feeder: 30mm 900mm wide main belt fitted with impact bars at feed point Skirting on discharge conveyor High spec scraper at head drm General Dst spression (no pmp spplied) Main conveyor fitted with hose and spray bars as standard Piped for overband magnet Hydralic oil temperatre sensor Galvanised catwalk c/w handrail, kick board and access ladders Heavy dty ndercarriage nit with 400mm wide pads Control operation of tracks via hand held set with 5m connection lead Single speed tracks with soft start Gards to M & Q specification Low level greasing Emergency stops (6 nr) Featres: Prodct Conveyor 900mm (36 ) Belt 3.6m (10 10 )Discharge The robst high performance hydrostatic driven single toggle jaw chamber provides high capacity with large redction ratio s. Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. High powered hydrostatic drive ensres precise chamber controls and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications. Flly hydralic adjstable closed side setting minimises downtime and offers qick adjstment. R

Powernit Catwalks CAT C9 224kW (300HP) Hydrostatic transmission Electronic control system Catwalk

with reverse featre for clearing blockages Hydralic CSS and drawback bar Hopper and Feeder 5m³ (6.

4yd 3 )with optional extensions Hydralic folding By-pass conveyor (option) 650mm (26 ) belt width

2m (10 9 ) Sprocket centres 2m (6 8 ) discharge height 2.

3 Powernit Catwalks CAT C9 224kW (300HP) Hydrostatic transmission Electronic control system Catwalk access Powernit and chamber access Jaw Chamber 1000x600mm (40 x 24 ) inlet opening Hydrostatic Drive with reverse featre for clearing blockages Hydralic CSS and drawback bar Hopper and Feeder 5m³ (6.5yd³) Capacity 8m 3 (10.4yd 3 )with optional extensions Hydralic folding By-pass conveyor (option) 650mm (26 ) belt width Magnet Optional Chassis Robst, heavy dty chassis Tracks 400mm (16 ) shoe width 3.2m (10 9 ) Sprocket centres 2m (6 8 ) discharge height 2.8m (9 2 ) discharge option available Transport Dimensions 2.6m (8 9 ) 3.4m (11 2 ) 14.1m (46 3 ) Working Dimensions 5.8m (19 ) 3.5m ( m (46 3 ) Machine Weight: 34800kg (76720lbs) ** ** Note Standard Machine configration (Withot By-Pass Conveyor or Magnet)

6m (12 0 ) Discharge height 4m (13 2 ) Discharge option- illstrated Hydralic folding for transport Its compact size, qick set p times, ease of transport and simple maintenance make the Finlay J-1175

4 FINLAY J-1175 The Terex Finlay J-1175 is a high performance and aggressive tracked mobile jaw crsher. Incorporating a Terex Jaqes JW42 jaw crsher and a heavy dty vibrating grizzly feeder the Finlay J-1175 gives optimm prodction in a range of applications. 1000mm 40 Belt width 3.6m (12 0 ) Discharge height 4m (13 2 ) Discharge option- illstrated Hydralic folding for transport Its compact size, qick set p times, ease of transport and simple maintenance make the Finlay J-1175 ideal for qarrying, mining, demolition and recycling applications. Standard Featres Engine: Caterpillar C9 Acert 261 kw (350hp) water cooled diesel engine Jaw Chamber: Jaqes 1070 x 762mm (42 x 30 ) single toggle jaw crsher Hydrostatic drive and advanced electronic control system Flly hydralically adjstable closed side setting Reversible operation for clearing blockages S-tooth liners standard Hopper/Feeder 9m³ hopper (11.7 yd³) Hydralically folding sides Heavy dty vibrating feeder Grizzly feeder with integral pre-screen, standard 75mm spacing Selectable discharge to by-pass conveyor or main conveyor Mesh apertre on grizzly feeder: 38mm 1000mm wide main belt fitted with impact bars at feed point Skirting on discharge conveyor High spec scraper at head drm General Separate central operators panel Dst sppression (No pmp spplied) Main conveyor fitted with hose and spray bars as standard Piped for overband magnet Standard toggle setting 590mm Hydralic oil temperatre sensor Galvanised catwalk c/w handrail, kick board and access ladders Heavy dty ndercarriage nit with 500mm wide pads Control operation of tracks via hand held set with 5m connection lead Two speed tracks with soft start Gards to M & Q specification Low level greasing Emergency stops (7 nr) Featres: The robst high performance hydrostatic driven single toggle jaw chamber provides high capacity with large redction ratio s. Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. High powered hydrostatic drive ensres precise chamber controls and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications. Flly hydralic closed side setting minimises downtime and offers qick adjstment. R

Powernit CAT C9 261kW (350hp) Hydrostatic transmission Electronic control system Catwalk access Catwalks Jaw Chamber Powernit and chamber access 42 x 30 (1070mm x762mm) inlet opening Hydrostatic

7yd³) Hopper Capacity Heavy dty vibrating feeder with integral pre-screen Hydralic folding Chassis Robst, heavy dty chassis Magnet Optional Tracks 3.

5 Powernit CAT C9 261kW (350hp) Hydrostatic transmission Electronic control system Catwalk access Catwalks Jaw Chamber Powernit and chamber access 42 x 30 (1070mm x762mm) inlet opening Hydrostatic Drive with reverse featre for clearing blockages Hydralic CSS and drawback bar Hopper and Feeder 9m³ (11.7yd³) Hopper Capacity Heavy dty vibrating feeder with integral pre-screen Hydralic folding Chassis Robst, heavy dty chassis Magnet Optional Tracks 3.78m (12 5 ) Sprocket centres 500mm (20 ) Shoe width By-pass conveyor (option) 650mm (26 ) belt width 2.1m (6 10 ) discharge height 2.9m (9 6 ) discharge option available Transport Dimensions 2.9m (9 6 ) 3.5m (11 6 ) 14.5m (47 8 ) Working Dimensions 6.2m (20 4 ) 3.95m (12 1 ) 15.7m (51 8 ) Machine Weight: 49500kg (109129lbs)** ** Note Standard Machine configration (Withot By-Pass Conveyor or Magnet)

FINALY J-1480 The Terex Finlay J-1480 incorporates the Terex Jaqes JW55 single toggle jaw crsher which boasts a throghpt capacity p to 700mtph depending on application and material.

applications. The large 10m³ hopper has hydralically folding sides and hydralic wedge clamp system providing faster machine set p time.

5m (14 9 ) discharge height High spec scraper at head drm Overband magnet option Hydralic folding for transport Dst sppression system fitted as standard Standard Featres Engine: Caterpillar C13 328

6 FINALY J-1480 The Terex Finlay J-1480 incorporates the Terex Jaqes JW55 single toggle jaw crsher which boasts a throghpt capacity p to 700mtph depending on application and material. The machine is available with direct drive to offer improved fel efficiency and greater power tilisation or hydrostatic drive which offers reversible operation for clearing blockages and demolition applications. The large 10m³ hopper has hydralically folding sides and hydralic wedge clamp system providing faster machine set p time. The machine featres a vibrating pan feeder linked to an aggressive independently driven pre-screen which provides optimm separation of dirt, fines and difficlt materials. 1400mm (55 ) Belt width 4.5m (14 9 ) discharge height High spec scraper at head drm Overband magnet option Hydralic folding for transport Dst sppression system fitted as standard Standard Featres Engine: Caterpillar C kw (440hp) water cooled diesel engine Jaw Chamber: Jaqes 1397mm x 762mm (55 x 30 ) single toggle jaw crsher Hydrostatic drive and direct drive systems available Flly hydralically adjstable closed side setting Reversible operation for clearing blockages S-tooth liners standard Hopper/Feeder 10m³ hopper (13 yd³) Heavy dty vibrating Pan & independent Pre-screen (100mm Standard spacing) Mesh apertre on grizzly feeder: 38mm Selectable discharge to by-pass conveyor or main conveyor 1400mm wide main belt fitted with impact bars at feed point Skirting on discharge conveyor High spec scraper at head drm General Dst sppression (no pmp spplied) fitted with hose & Spray bars as standard Piped for overband magnet Separate central operator s panel Hydralic oil temperatre sensor Galvanised catwalk c/w handrail, kick board and access ladders Heavy dty ndercarriage nit with 500mm wide pads Control operation of tracks via hand held set with connection lead Two speed tracks with soft start Gards to M & Q specification Low level greasing Emergency stops (7 nr) Electric refelling pmp Featres: Terex Jaqes Jaw with flly hydralic adjstable closed side setting Hydrostatic & Direct drive systems with advanced electronic control system 10m³ (13yd³) hopper capacity. Optional hopper side extensions are available Independent Vibrating Pan and Pre-Screen Selectable discharge to by-pass conveyor or main conveyor MAGNETIC SEPARATOR (optional) Sspended self-cleaning crossbelt overband magnet Powern C Advanc control s Hydrosta Catwalk R

Catwalks Powernit and chamber access Jaw Chamber Terex Jacqes JW55 single toggle Jaw Chamber 1370mm (54 ) x

Feeder 10m 3 (13yd 3 ) hopper capacity Hydralic folding sides with hydralic locking wedges Integral vibrating

ystem tic Drive and Direct Drive access Undercarriage 4.

750mm (30 ) wide plain belt Universal monting to left or right side Folds hydralically for transport 3.

removal Robst, heavy dty chassis Hopper feeder section removable if necessary in 2 loads 3.38m (11 1 ) 3.

7 Catwalks Powernit and chamber access Jaw Chamber Terex Jacqes JW55 single toggle Jaw Chamber 1370mm (54 ) x 762mm (30 ) inlet opening Hydrostatic and Direct drive options available Fll hydralic CSS adjst Hopper and Feeder 10m 3 (13yd 3 ) hopper capacity Hydralic folding sides with hydralic locking wedges Integral vibrating pan & screen Selectable discharge to By-Pass or it/ CONTROL SYSTEM 1800rpm ed CANBUS electronic ystem tic Drive and Direct Drive access Undercarriage 4.2m (13 9 ) sprocket centres 500mm (20 ) shoe width Dal speed tracking with soft start By-pass conveyor (option) 750mm (30 ) wide plain belt Universal monting to left or right side Folds hydralically for transport 3.6m (11 10 ) discharge height Transport Dimensions Chassis INDEPENDENT PRE-SCREEN Optional for increased fines removal Robst, heavy dty chassis Hopper feeder section removable if necessary in 2 loads 3.38m (11 1 ) 3.8m (11 1 ) 18m (59 4 ) Working Dimensions 6.7m (22 0 ) 4.6m (15 3 ) 20.7m (67 11 ) Machine Weight: 69000kg (152117lbs)** ** Note Standard Machine configration (Withot By-Pass Conveyor or Magnet)

8 Effective Prodct specifications and prices are sbject to change withot notice or obligation. The photographs and/or drawings in this docment are for illstrative prposes only. Refer to the appropriate Operator s Manal for instrctions on the proper se of this eqipment. Failre to follow the appropriate Operator s Manal when sing or eqipment or to otherwise act irresponsibly may reslt in serios injry or death. The only warranty applicable to or eqipment is the standard written warranty applicable to the particlar prodct and sale and Terex makes no other warranty, express or implied. Prodcts and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its sbsidiaries in the USA and other contries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other contries. Copyright 2010 Terex Corporation. Terex Mobile Processing Eqipment, Drmqin Road, Omagh, Co. Tyrone, N.Ireland. BT78 5PN Tel: +44(0) Fax: +44(0) R

J-1175 Dual Power Jaw Crusher

J-1175 Dual Power Jaw Crusher R J-1175 J-1175 Dal Power Jaw Crsher SPECIFICATION: Inlet Opening: 1070mm x 760mm (42 x 30 ) Net Engine Power: Tier 2 / Stage II Eqivalent: Scania DC9 350hp (257kW) Tier 4F / Stage IV: Scania DC9 350hp