Uses one power source to run a complete crushing operation and three auxiliary outlets.
|
|
- Bertram Hudson
- 6 years ago
- Views:
Transcription
1
2 Dimensions
3 RDS-20 Easy to move, Simple to operate, Quick to set-up and Ideal for boosting productivity, the RDS-20 unit increases production by up to 20 percent by splitting oversized material to return to the crusher on two decks, rather than one. Features The closed-circuit design can be set to produce one sized product by returning the top two screen decks back to the conveyor for further crushing. Operators can also set the machine to produce two sized and one oversized product. Uses one power source to run a complete crushing operation and three auxiliary outlets. The optional, patented Hydraset Hopper simplifies the connection and removal of the hopper/feeder so just one operator can prepare the unit for transportation in minutes. IROCK s exclusive ROCK BOX design reduces the impact on the discharge point by allowing crushed material to build into a natural rock shelf. Specifications GENERAL MODEL RDS-20 SHIPPING DIMENSIONS (PLANT WITHOUT HYDRASET HOPPER) LENGTH 61' 8" WIDTH 11' 11" HEIGHT 14' 1"
4 WEIGHT 92,300 LBS SHIPPING DIMENSIONS (HYDRASET HOPPER) LENGTH 20' 9" WIDTH 11' HEIGHT 12' 1-1/2" WEIGHT 35,000 LBS OPERATING DIMENSIONS (PLANT WITH HYDRASET HOPPER ASSEMBLED) LENGTH 68' 6" WIDTH 11' 11" HEIGHT 18' 11" (WITH MAGNET) CUBIC VOLUME 11' 11" WEIGHT POWER ENGINE ENGINE HP CLUTCH FUEL TANK CAPACITY GENERATOR 127,300 LBS CAT C-13 ACERT DIESEL, "C" INTERMITTENT DUTY, (Tier 3) EMISSIONS APPROVED 440 HP HPTO 12 HYDRAULICALLY APPLIED DRY CLUTCH 140 GAL 125 KW HYDRAULICS - PLANT HYDRAULIC TANK CAPACITY RECOMMENDED OPERATING TEMPERATURE HYDRAULIC FLUID CHANGE INTERVALS 30 GALLONS 86 DEG F TO 140 DEG F (30 DEG C T0 60 DEG C) REQUIRED CLEANLINESS CLASS 18/16/13 (ISO ) HYDRAULICS - HYDRASET HOPPER 4-BANK DIRECTIONAL VALVE FIRST CHANGE: 500 HOURS AFTER START-UP HOURS OR ONCE A YEAR AFTERWARDS. NOTE: FLUID SAMPLES ARE THE BEST DETERMINATION FOR SUITIBILITY OF CONTINUED USE OF HYDRAULIC FLUIDS UNDER EXTREME OPERATING CONDITIONS. CONTROLS 4 OUTRIGGER RAISE/LOWER FUNCTION
5 HONDA ENGINE W/ ELECT. START SCREEN FEED CONVEYOR SELF-SUSTAINING SYSTEM FOR POWERING HYDRASET OUTRIGGERS BELT WIDTH 48" BELT TYPE 220 PIW 2-PLY 3/16 X 1/16 CONVEYOR LENGTH 48' HEAD PULLEY TYPE HEAD PULLEY DIMENSIONS TAIL PULLEY TYPE TAIL PULLEY DIMENSIONS BEARINGS TYPE - HEAD PULLEY BEARINGS TYPE - TAIL PULLEY STAINLESS STEEL DRUM, W/ 1/2" HARRINGBONE LAGGING 16" DIA X 51" FACE WIDTH WING 14" DIA X 51" FACE WIDTH 3-7/16" DIA 2-15/16" DIA BELT CLEANERS DRIVE TYPE SKIRTBOARD LENGTH 15' 48" SECONDARY BELT CLEANER WITH TWIST TENSIONER 20 HP ELECTRIC MOTOR, 1750 RPM WITH SHAFT MOUNTED GEARBOX 14:1 RATIO SPREADER PLATE YES IDLERS CEMA B, 5" DIA X 24" RETURN IDLERS BELT SPEED ADDITIONAL INFORMATION RETURN CONVEYOR CEMA B, 5" DIA X 24" LENGTH 350 FPM 48" WIDE UNDER CRUSHER/SCREEN FEED CONVEYOR WITH ROCK BOX AND IMPACT TRAY IN THE DISCHARGE AREA BELT WIDTH 24" BELT TYPE 220 PIW 2-PLY 3/16 X 1/16 DURACLEAT CONVEYOR LENGTH 38' 8-13/16" HEAD PULLEY TYPE DRUM WITH 1/2" LAGGING
6 HEAD PULLEY DIMENSIONS TAIL PULLEY TYPE 12" DIA X FACE WIDTH WINGED TAIL PULLEY DIMENSIONS 10" DIA x 26" FACE WIDTH, (SHAFT) 2-7/16"ø X 35" BEARINGS TYPE - HEAD PULLEY BEARINGS TYPE - TAIL PULLEY BELT CLEANER DRIVE TYPE GEAR REDUCER SPREADER PLATE IDLERS RETURN IDLERS ADDITIONAL INFORMATION FINES CONVEYOR FLAT MAOUNING BLOCKS (NO BEARINGS) 2-7/16" DIA 7.5 HP INTERNAL DRIVE PULLEY, 300 FPM CEMA B, 5" DIA X 24" BELT WIDTH CEMA B, 5" DIA X 24" BELT WIDTH RETURN CHUTE IS LINED WITH AR400 AND FOLDS INTO HOPPER FOR TRANSPORT BELT WIDTH 48" BELT TYPE 220 PIW 2 PLY 3/16 X 1/16 CONVEYOR LENGTH 16' HEAD PULLEY TYPE HEAD PULLEY DIMENSIONS TAIL PULLEY TYPE TAIL PULLEY DIMENSIONS BEARINGS TYPE - HEAD PULLEY BEARINGS TYPE - TAIL PULLEY BEARING SIZE - TAIL PULLEY DRUM WITH 1/2" LAGGING 16" DIA X 51" FACE WIDTH, (SHAFT) 3-15/16" DIA X 70" LONG WINGED 14" DIA X 51" FACE WIDTH, (SHAFT) 3-7/16" DIA X 71" LONG 3-15/16" DIA 3-7/16" DIA
7 BELT CLEANER DRIVE TYPE SKIRTING SPREADER PLATE 48" PRIMARY BELT CLEANER WITH PIT VIPER BLADE - TWIST TENSIONER MTR/REDUCER 2-3/16 HOLLOW SHAFT, 15.38:1 RATIO 3/8" X 4" 14' LONG IDLERS CEMA B, 5" DIA X 48" RETURN IDLERS CEMA B, 5" DIA X 48" BELT SPEED 300 FPM COLLECTION CONVEYOR (TOP DECK AND 2ND DECK) BELT WIDTH 24" BELT TYPE 220 PIW 2 PLY 3/16 X 1/16 CONVEYOR LENGTH 8' 7-1/4" HEAD PULLEY TYPE HEAD PULLEY DIMENSIONS TAIL PULLEY TYPE TAIL PULLEY DIMENSIONS BEARINGS TYPE - HEAD PULLEY BEARINGS TYPE - TAIL PULLEY DRUM WITH 1/2" LAGGING 8" DIA X FW WINGED 8" DIA X 26" FACE WIDTH, (SHAFT) 1-15/16" DIA X 35-1/4" LONG FLAT MAOUNING BLOCKS (NO BEARINGS) BEARING SIZE - TAIL PULLEY 1-15/16" BELT CLEANER DRIVE TYPE SPREADER PLATE 3 HP INTERNAL DRIVE HEAD PULLEY, 250 FPM IDLERS CEMA B, 4" DIA X 24" RETURN IDLERS CEMA B, 4" DIA X 24" HOPPER TYPE HYDRASET HOPPER
8 OVERALL DIMENSIONS (INCLUDES LEGS) HOPPER DIMENSIONS 103-1/4"(W) X 228-7/16"(L) X 70-9/16"(H) 103-1/4"(W) X 228-7/16"(L) X 36-9/16" (H) FEEDER TYPE DRIVE TYPE VIBRATING GRIZZLY FEEDER WITH 5' 2-STEP RELIEVING GRIZZLY SECTION ELECTRIC MOTOR 30 HP, 1750 RPM WITH V-BELT DRIVE AND GUARD WIDTH 52" LENGTH 17' GRIZZLY SPECS FIXED PLATE FABRICATED STEEL GRIZZLY WITH 1-1/2" OPENINGS CRUSHER CRUSHER TYPE IMPACT CRUSHER MODEL 4056 NO. OF BLOW BARS NO. OF APRONS 2 BLOW BARS, 2 DUMMY BARS 2 ADJUSTABLE, 1 FIXED SCREEN SREENBOX TYPE 2-DECK INCLINE SCREENBOX DIMENSIONS 5' X 16' MATERIAL SPREADER SREENBOX DRIVE LUBRICATION TYPE YES 20 HP TEFC ELECTRIC MOTOR, 1800 RPM GREASE CHASSIS SUSPENSION WHEELS/TIRES PLANT LEVELING OTHER SAFETY FEATURES DUST SUPPRESSION FIFTH WHEEL, TRIPPLE AXLE CHASSIS WITH AIR BRAKES ON ALL AXELS. 12 WHEEL HUB PILOTED 10 HOLE 22.5 DIA, W/ 11R X PLY TIRES SIX HYDRAULIC OUT RIGGERS FOR PLANT SET UP AND LEVELING. FOUR LEGS PROVIDED ON HYDRASET HOPPER OPTION AND TWO FRONT LEGS STANDARD. MSHA GUARDING, H2O SPRAY SYSTEM WITH TWO SPRAY BARS. ONE SPRAY BAR AT THE
9 CRUSHER INLET AND ONE AT THE CRUSHER OUTLET. OPTIONS HYDRASET HOPPER SYSTEM SELF CLEANING MAGNET, FRAME AND STAINLESS STEEL DISCHARGE CHUTE CENTRALIZED GREASE PORTS KIDNEY LOOP HYDRAULIC OIL FILTERING SYSTEM PT TECH EXTENDED WARRANTY SCREEN CLOTH ELECTRICAL ENCLOSURE MAIN DISCONNECT STARTERS AUXILIARY STARTERS FOR ADDITIONAL EQUIPMENT VOLTAGE HORN EEMAC/NEMA TYPE 4 WITH FLANGE DISCONNECT 225 AMP MAIN DISCONNECT NEMA RATED THREE NEMA #2 STARTERS WITH 30 AMP PLUGS ARE PROVIDED FOR AUXILIARY EQUIPMENT. COMBINED HP OF THREE AUXLIARY EQUIPMENT CAN NOT EXCEED 50 HP AND ALL OVERLAODS NEED TO BE ADJUSTED PER APPLICATION. 480 VOLT 3 PHASE MAIN POWER WITH 120 VOLT SINGLE PHASE CONTROL VOLTAGE HORN SOUNDS AUTIMATICALLY BEFORE PLANT FUNCTIONS CAN START
10 Revision date: January 1, 9999
The standard ROCK BOX reduces wear on the discharge point by forming crushed material into a natural rock shelf to serve as a liner.
Dimensions TC-20 The TC-20 tracked crusher has the largest hopper in its class and is built for big loads and even bigger production. IROCK s TC-20 produces a uniform, cubical product that will increase
More informationSuperior Guardian 7x20 3-Deck Horizontal Screen Plant
Superior Guardian 7x20 3-Deck Horizontal Screen Plant #1036843 Carrier chassis Main frame constructed of wide flange structural steel beams Tandem axle with (8) 11x22.5 radial tires complete air brake
More informationSuperior Guardian 6x20 3-Deck Tandem Screen Plant, Unit #838
Superior Guardian 6x20 3-Deck Tandem Screen Plant, Unit #838 #1036872 Carrier chassis Main frame constructed of wide flange structural steel beams Split Quad axle with (16) 11x22.5 radial tires, 4' - 8'
More informationDEISTER MACHINE COMPANY, INC.
DEISTER MACHINE COMPANY, INC. Vibrating Screens Feeders Scalpers and Grizzlies Foundry Shakeouts Vibrating Conveyors Sand Reclaimers 1933 East Wayne Street [46803] PO Box 1 [46801] Fort Wayne, IN, U.S.A.
More information133x152 TWO PRODUCT RAMBLER. 133x152 TRACK MOUNTED IMPACT CRUSHER. Two Bars Per Row. 150mm x 320mm Bearing With Big Cast Base. Each Hammer lbs.
Construction Equipment Co. 2 5 1 x 3 3 1 Feeder Size 58 x 18 CAT 600hp Impactor 133x152 Track Mobile Impactor Features Heavy Duty Rotor 4 x 8 Backing Bar With Replaceable Seats 14 Steel Rotor Core Dual
More informationUJ440I HD JAW CRUSHER FEATURES & BENEFITS. Rev
HD JAW CRUSHER FEATURES & BENEFITS Rev 1 02-12-14 MODELS AVAILABLE Comfort - standard grizzly feeder Trend - pan feeder and live pre screen Classic - standard grizzly feeder and live under screen 2 Hopper
More informationCRC450X PORTABLE CONE PLANT
Terex Minerals Processing Systems Cedarapids CRC450X CRC450X PORTABLE CONE PLANT Unit shown with the following options: right-hand feed conveyor; 45' (13,716 mm) undercrusher conveyor; oversized quick
More informationCRUSH EVERY JOB 2019 PRODUCT CATALOG AMERICAN-MADE INNOVATION SINCE 1966
AMERICAN-MADE INNOVATION SINCE 1966 2019 PRODUCT CATALOG CRUSH EVERY JOB TM 10685 COLUMBUS PARKWAY, ETNA, OHIO USA 43062 CRUSH EVERY JOB TM That s more than just a catch phrase at Machine. It s how we
More information700i TECHNICAL SPECIFICATION. MOBILE JAW CRUSHER With CAT C9 Engine. Technical Specification CRUSHERS. SCREENERS. BULK HANDLING
700i MOBILE JAW CRUSHER With CAT C9 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self-Contained Mobile Jaw Crusher with the following features: 300Hp CAT C9 Tier III Diesel
More information694+ Supertrak 694+ SPECIFICATION:
R Supertrak SPECIFICATION: Screen Size: 6100mm x 1530mm (20 x 5 ) Top, Middle & Bottom deck screenbox Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 97kW (130hp) Tier 4i / Stage IIIB: Caterpillar
More informationQA451 TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS. Rev
TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS Rev 1 09-01-15 Feed hopper Tipping grid Screenbox Main conveyor Engine Tracks Dimensions Standard features Options Benefits overview 2 FEED CONVEYOR 1200mm
More informationI-140 Impact Crusher SPECIFICATION:
R Impact Crusher SPECIFICATION: Rotor Size: Ø1270mm x 1220mm (Ø50 x 48 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C15 C-15 540hp (403kW) Tier 4i / Stage IV: SCANIA DC-13 500Hp (373kW) Portability:
More informationi44r Jul. 2012, issue 001 SPECIFICATIONS McCloskey i44r All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i44r 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1050mm (42") diameter x 1100mm (43") wide Impactor. - 350Hp Cat C9 engine. - Track or Track c\w Wheel
More informationSPECIFICATIONS. McCloskey S190 3-Deck S190 3D. May 2012, issue 004 DISTRIBUTOR FOR AFRICA
S190 3D SPECIFICATIONS McCloskey S190 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: S190 3D 20x5 heavy duty high energy 2 bearing 3 deck screenbox. 125Hp Cat engine. Track or wheel
More informationUI310+ IMPACT CRUSHER FEATURES & BENEFITS. Rev Rev
IMPACT CRUSHER FEATURES & BENEFITS Rev 0 30-09-16 Rev 2 09-04-15 Introduction Applications Impact crusher Feeder and hopper Wheel mounted High capacity operation Safety features Control Dimensions Standard
More informationQS331 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty hopper sides 5m³ / 6.5yd³ nominal
More information4242SR SPECIFICATION IMPACT CRUSHER APPLICATIONS. Above photograph features a 4242SR fitted with the optional side conveyor and magnet
Above photograph features a 4242SR fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine
More informationQJ331 Jaw Crusher Features & Benefits Revision
QJ331 Jaw Crusher Features & Benefits Revision 03 08-09-2014 1 Sandvik Mobiles Hopper Feeder Crusher Main Conveyor Controls Engine Tracks Options Benefits Overview 2 Sandvik Mobiles Hopper 2505mm x 4500mm
More informationQS441 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty fixed hopper design enables
More informationMcCloskey S190 3-Deck
SPECIFICATIONS McCloskey S190 3-Deck 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing 3 deck screenbox. - 125Hp Cat engine. - Track or wheel mobile.
More informationJ50 Nov. 2009, issue 000 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
More informationJ45 Nov. 2015, issue 003 SPECIFICATIONS. McCloskey J45. All specifications are current as of this printing, but are subject to change
J45 SPECIFICATIONS McCloskey J45 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1140 (45 ) x 688 (27 ) single toggle jaw. - 350Hp C9 / C9.3 Cat engine. - Track or Track c\w Wheel
More informationM 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
More informationM 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
More information623CT. TECHNICAL SPECIFICATION Subject to change without notice.
623CT MOBILE IMPACT CRUSHER with CAT C9-T3 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self Contained Mobile Impact Crusher with the following features: 275Hp CAT C9 Tier
More informationQH331 CONE CRUSHER FEATURES & BENEFITS. Rev Rev
CONE CRUSHER FEATURES & BENEFITS Rev 2 23-03-15 Rev 1 01-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Standard features Options Benefits overview 2 HOPPER DOORS Heavy
More informationJ50 Apr. 2011, issue 006 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
More informationMobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feeder Tipping Grid Vibrating double deck grid option Operated
More informationOVERVIEW SCREEN MACHINE INDUSTRIES, INC.
OVERVIEW Screen Machine Industries is a global leader in crushing and screening equipment with manufacturing headquarters located in Columbus, Ohio, USA. Directionally reversible, 42 wide conveyor with
More informationSPECIFICATIONS. McCloskey S130 3-Deck S130 3D. Oct. 2013, issue 002 DISTRIBUTOR FOR AFRICA
SPECIFICATIONS McCloskey S130 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: - 14x5 heavy duty high energy 2 bearing 3 deck screenbox. - 100Hp Cat engine. - Track or wheel mobile.
More informationi54 Sept. 2009, issue 006 SPECIFICATIONS McCloskey i54 All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i54 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - Universal 1200mm (47") diameter x 1350mm (53") wide Impactor. - 430Hp C13 Cat engine. - Track or Track
More informationS130 Nov. 2006, issue 005 SPECIFICATIONS. McCloskey S130. All specifications are current as of this printing, but are subject to change
S130 SPECIFICATIONS McCloskey S130 1 DESCRIPTION Heavy duty mobile screener with following features: - 14x5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat engine. - Track or wheel mobile. - Integrated
More informationS190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 SPECIFICATIONS McCloskey S190 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp Cat engine. - Track or wheel mobile. - Integrated
More information6 SERIES MOBILE DECK DECK INCLINED SCREENS
6 SERIES MOBILE 663 683 684 2-DECK 684 3-DECK 693+ 694+ INCLINED SCREENS 663 Finlay 663 combines the functions of scalping, screening and stockpiling into the one integrated mobile unit. Its rugged design
More informationCONE CRUSHER CRUSHER OPTIONS MAXIMUM FEED SIZE
CONE CRUSHER Crusher type: Liners: Standard concave: Adjustment: Control: Concave options: Eccentric option: 1000 Automax Crusher fitted with long throw eccentric. Manganese steel alloy mantle and concave.
More informationI-130 Impact Crusher
R I-130 I-130 Impact Crusher SPECIFICATION: Rotor Size: Ø1270 x 1219mm Ø50 x 48 Net Engine Power: 328kW 440 HP Portability: Tracked Operating Weight: 49,000 kgs* 108026 lbs* *Note: Without one by-pass
More informationPowerscreen Commander 1400
2 Deck Incline Screen Specification 14ft Hopper (tipping grid) 14ft Hopper (with DDVG) Total weight 20,200kg (44,440 lbs)* 22,660kg (49,852 lbs)* Transport Length 13.5m (44 3 ) 13.28m (43 7 ) Width 2.72m
More informationA TEREX BRAND. Technical Specification. COBRA 260R Horizontal Impact Crusher
A TEREX BRAND Technical Specification COBRA 260R Horizontal Impact Crusher PRINCIPAL COMPONENTS OF THE EVOQUIP COBRA IMPACT CRUSHER PRINCIPLES OF OPERATION Material enters via the crusher opening & slides
More informationPowerscreen Warrior Deck Heavy Duty Incline Screen. Specification - Rev /01/2017
Powerscreen Warrior 2400 2 Deck Heavy Duty Incline Screen Specification Three Way Split Two Way Split Total weight 46,200kg ( 101,853lbs)* 43,000kg (94,779 lbs)* Transport Length 17.3m (56 10 ) 17.2m (56
More informationS190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 Nov. 2006, issue 006 SPECIFICATIONS McCloskey S190 1 Nov. 2006, issue 006 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp
More informationPowerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight 27,800kg (61,288lbs) Transport Length 13.12m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m (42 9 ) Width 3.87m (12 6 ) with dirt
More informationM 1400 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1400 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 4 end products Quick set up time Ideally
More informationPowerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight Tier 3: 28,100kg (61,949lbs) Tier 4F: 29,250kg (64,485lbs) Transport Length 13.1m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m
More informationTECHNICAL DESCRIPTION. Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1)
TECHNICAL DESCRIPTION Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1) to dimension sheet No. 42 1534 49 A. General technical data 001 Application Feed material: Throughput
More informationFLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment.
FLYWHEEL HORSEPOWER 228 kw 306 HP @ 1950 rpm OPERATING WEIGHT 38300 kg 84,440 lb MOBILE CRUSHER Photos may include optional equipment. BR480RG-1 Mobile Crusher WALK-AROUND Komatsu s newly designed BR480RG-1
More informationBarford SR124 Screener Barford SR124 Screener Visit our website for full inventory
WWW.BARFORD.COM Barford SR124 Screener Barford SR124 Screener Barford SR124 Heavy Duty 3 Way Split Screen, 12 x 4 2 (3.66m x 1.28m) Screenbox, CAT 4.4 (56kw/75hp), Remote Control Movement, Fits in 40Ft
More information428 TRAKPACTOR SPECIFICATION
IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine pulley: Maximum feed size: Impactor speeds: Lubrication: APPLICATIONS 428 Fixed
More information428 TRAKPACTOR SPECIFICATION
Above photograph features a 428 Trakpactor fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact
More informationPOWERSCREEN SCREENING PRODUCT RANGE
POWERSCREEN SCREENING PRODUCT RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
More informationMODEL 271K 271K INCLINE SCREEN PARTS MANUAL PA-271K /14 AGGR EGAT E A N D M IN IN G G R O U P
3408 INCLINE SCREEN PARTS MANUAL AGGR EGAT E A N D M IN IN G G R O U P PA-271K.3408 3/14 MODEL 271K 271K Table of Contents PA-271K.3408 3/14 I Section 1: Parts 5 PARTS ORDERING 5 FEED BIN 7 FEED BIN ASSEMBLY
More informationHORIZONTAL SHAFT IMPACTOR XH250 SPECIFICATION XH250/208
HORIZONTAL SHAFT IMPACTOR XH250 SPECIFICATION XH250/208 XH250 SPECIFICATION - OVERVIEW The TEREX Pegson XH250 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world
More informationPowerscreen Trakpactor 260
Powerscreen Trakpactor 260 Horizontal Impactor Powerscreen Trakpactor 260 Specification Total weight Trakpactor 260 Standard 27,000kg (59,525lbs) including side conveyor and magnet Transport Length 13.40m
More informationSOUTHEAST CRUSH & SCREEN LLC
SOUTHEAST CRUSH & SCREEN LLC 615-289-9890 WWW.SECRUSHANDSCREEN.COM SPECIFICATIONS 640 MOBILE SCALPING SCREEN General The is a heavy duty scalping screen designed to work in tandem with our Fintec 1107
More informationPowerscreen Chieftain 2100X
Powerscreen Chieftain 2100X 3 Deck Incline Screen Specification - Rev X. 8. 16/05/2011 01/01/2015 Specification 14ft Hopper (with grid) track 14ft Hopper (with DDVG) track Total weight 37,400kg (82,453lbs)*
More informationPRIMARY MOBILE CRUSHING PLANT
PRIMARY MOBILE CRUSHING PLANT PRIMARY MOBILE PLANT WITH STJ 108 FOLDABLE HOPPER VIB. GRIZZLY JAW CRUSHER DG SET DISC. CONVEYOR VIB. FEEDER REJ. CONVEYOR TRACK CHASSIS PRIMARY MOBILE PLANT WITH STJ 108
More informationPowerscreen 1000SR. Cone Crusher. SPECIFICATION - Rev
Cone Crusher Specification Total weight 1000SR 38,500kg (84,900lbs) Transport Length 16.9m (55 5 ) Width 3.1m (10 2 ) Height 3.45m (11 4 ) Working Length 16.9m (55 5 ) Crusher type: Powerunit: Width 3.1m
More informationPowerscreen Chieftain 1700S 3 Deck Incline Screen. Specification - Rev 5. 01/01/2013
Powerscreen Chieftain 1700S 3 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 27,500kgs (60,627lbs)* 29,800kg (65,698lbs)* Transport Length 16.81m
More informationPowerscreen Chieftain Deck Incline Screen. Specification - Rev /01/2017
2 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 22,000kg (48,502lbs)* 24,900kg (54,895lbs)* Transport Length 16.95m (55 7 ) 15.4m (50 6 ) Width
More informationcontents Table of Equipments Components experts at your service achievements... R1 Drum pulley... C1
mgr-conveyors.com Table of contents MGR Components Equipments experts at your service Drum pulley... C1 Lagging... C1 Wing pulley... C2 Spiral wing pulley... C2 Portable primary crushing plants... E1 Secondary
More informationm 2100 washplant SYSTEMS WASHING Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products
WASHING SYSTEMS TECHNICAL SPECIFICATION m 2100 washplant FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
More informationPowerscreen 1500 Maxtrak
Powerscreen 1500 Maxtrak Cone Crusher Specification 1500 Maxtrak Total weight 89,000kg (196,211bs) Transport Length 22.0m (72 6 )* Width 3.5m (11 6 )* Height 3.85m (12 8 )* Working Length 23.9m (79 9 )
More informationTel: Fax: INTRODUCING THE. Commander 510
Sales & Rentals LLC 11901 Westport Rd, Louisville, KY 40245 Tel:502 326 9300 Fax:502 326 9305 Email:sales@powerscreensales.com INTRODUCING THE FEATURES Total weight Width (transport) 2.47m (8' 1") Length
More information1412 TRAKPACTOR SPECIFICATION
Above photograph features a 1412 Trakpactor fitted the with optional side conveyor and magnet. IMPACT CRUSHER Crusher type: Rotor Width: Rotor Diameter: Feed opening: Crusher frame: Rotor: Blowbars: Impact
More informationR105 April. 2009, issue 004 SPECIFICATIONS. McCloskey R105. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R105 1 DESCRIPTION Heavy duty mobile screener with following features: - 12x4.5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat diesel engine. - Track mobile. - Direct
More informationPOWERSCREEN CRUSHING RANGE
POWERSCREEN CRUSHING RANGE KNOWLEDGE POWERSCREEN CRUSHING RANGE IS POWER Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening equipment,
More informationPOWERSCREEN SCREENING RANGE
POWERSCREEN SCREENING RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
More informationPOWERSCREEN CRUSHING RANGE
POWERSCREEN CRUSHING RANGE KNOWLEDGE POWERSCREEN CRUSHING RANGE IS POWER Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening equipment,
More informationINCLINED SCREEN SPECIFICATIONS: Screen Size: Net Engine Power: Tier 3 / Stage 3A: CAT (4.4 ATAAC) Portability:
R 674 674 INCLINED SCREEN SPECIFICATIONS: Screen Size: Net Engine Power: Tier 3 / Stage 3A: CAT (4.4 ATAAC) Engine Power: 98.1kW (131hp) Tier 4F / Stage IV: CAT (4.4 ATAAC) Engine Power: 82kW (110hp) Tier
More informationPOWERSCREEN SCREENING RANGE
POWERSCREEN SCREENING RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
More informationHorizontal Impactor. SPECIFICATION - Rev 1. 19/10/09
Horizontal Impactor SPECIFICATION - Rev 1. 19/10/09 The Powerscreen Pegson XH320 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world class range of tracked machines.
More informationPOWERSCREEN CRUSHING RANGE
POWERSCREEN CRUSHING RANGE KNOWLEDGE POWERSCREEN CRUSHING RANGE IS POWER Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening equipment,
More informationsuperiority RM V550G0! quality crushing New applications through flexibility and mobility. V550GO!
EN superiority RM V5G! quality crushing New applications through flexibility and mobility. V5GO! A B highlights The technical Highlights % mobility The transport as well the start up and dismounting are
More informationPowerscreen 1300 Maxtrak Cone Crusher
Cone Crusher Specification 1300 Maxtrak Total weight Tier 3: 48,020kg (105,865lbs) (No Options) Tier 4F: 47,880kg (105,557lbs) (No Options) Transport Length 15.35m (50 4 ) Width 3.0m (9 10 ) Height 3.85m
More informationPowerscreen H Deck Horizontal Screen. Specification- Rev /01/2017
3 Deck Horizontal Screen Specification- Rev 10. 01/01/2017 Specification Belt Feeder Total weight 46,700kg (102,955lbs)* Transport Length 19.6m (64 3 ) Width 3.2m (10 6 ) Height 3.6m (11 10 ) Working Length
More informationPOWERSCREEN CRUSHING RANGE
POWERSCREEN CRUSHING RANGE KNOWLEDGE POWERSCREEN CRUSHING RANGE IS POWER Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening equipment,
More informationSANDVIK CR320 FEEDER BREAKER
SANDVIK CR320 FEEDER BREAKER TECHNICAL SPECIFICATION The Sandvik feeder breaker CR320 is a robust, modular machine designed for heavy duty underground coal mine operations. The machine is suitable for
More informationPowerscreen Premiertrak 300. Jaw Crusher. SPECIFICATION - Rev 0. 01/02/2017
Powerscreen Premiertrak 300 Jaw Crusher SPECIFICATION - Rev 0. 01/02/2017 Powerscreen Premiertrak 300 Specification Premiertrak 300 Total weight 35,000kg (77,161lbs) *including magnet & dirt conveyor.
More informationINTRODUCING THE XA400 SPECIFICATION XA400/206
INTRODUCING THE XA400 SPECIFICATION XA400/206 FEATURES The new Terex Pegson XA400 is the most modern plant of its type and is packed with new user friendly features. The very high performance of this new
More informationR R J-1480 JAW CRUSHER
R R J-1480 JAW CRUSHER Power, Performance & Profitability... Introducing the new J-1480 the largest Jaw Crusher in the Terex Finlay crushing range. The J-1480 is fitted with a Terex Jaques 1370mm x 762mm
More informationPOWERSCREEN CRUSHING PRODUCT RANGE
POWERSCREEN CRUSHING PRODUCT RANGE KNOWLEDGE IS POWER POWERSCREEN CRUSHING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
More information1) Project Description: -
1) Project Description: - Bulk material, will be transported to the Stockpile area by the clients conveyor system and then discharged direct to a stockpile with a height of up to typically 15.0 m. (Client
More informationR R J-1175 JAW CRUSHER
R R J-1175 JAW CRUSHER Efficiency, Versatility Performance... The Terex Finlay J-1175 is fitted with a 1070mm x 760mm (42" x 30") Jaques crusher chamber and a heavy-duty undercarriage for exceptional on
More informationPowerscreen Premiertrak 400X & R400X. Jaw Crusher. SPECIFICATION - Rev 0. 23/03/2017
Powerscreen Premiertrak 400X & R400X Jaw Crusher SPECIFICATION - Rev 0. 23/03/2017 Specification Total weight Premiertrak 400X Tier 3: 46,300kg (102,274lbs) including side conveyor & magnet Tier 4F: 46,500kg
More informationPowertrack 800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationRAPIDMIX 400CW. Length of Machine (19.5m) Length when erected Width of Machine 9-10 (3.00 m) Width Same
Machinery Manufacturers to the Concrete Industry RAPIDMIX 400CW The Rapidmix 400CW has been designed to be totally mobile and completely self-contained with its own power source. It is also completely
More informationPowerscreen Premiertrak 400 / R400 Pre-Screen Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2015 Specification 400 Pre-Screen R400 Pre-Screen Total weight 48,220kg (106,306lbs)* 48,420kg (106,747lbs)* Transport Length 15.4m (50 6 ) 15.4m (50 6 ) Width
More informationSupertrak SPECIFICATION:
R 683 683 Spertrak SPECIFICATION: Screen Size: 3660mm x 1520mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 111.3hp (83kW) Tier 4i / Stage IIIB: Caterpillar C4.4-110hp (82kW) Portability:
More informationR70 June. 2009, rev 002 SPECIFICATIONS. McCloskey R70. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R70 1 DESCRIPTION Heavy duty mobile screener with following features: - 9x4 heavy duty high energy 2 bearing screenbox. - 63Kw (84Hp) JCB 444 diesel engine. - Track mobile. - Direct
More informationA TEREX BRAND COMPACT CRUSHING & SCREENING EQUIPMENT
A TEREX BRAND COMPACT CRUSHING & SCREENING EQUIPMENT A TEREX BRAND EvoQuip offers a comprehensive range of crushing and screening products to suit a wide variety of industries. The EvoQuip range starts
More informationA TEREX BRAND. Technical Specification. COLT 800 SCREEN 2 Deck Incline Screen
A TEREX BRAND Technical Specification COLT 800 SCREEN 2 Deck Incline Screen SPECIFICATION Total weight: 16,700Kg (36,817lbs) depending on machine specification TRANSPORT Length: 9.22m (30 3 ) Width: 2.5m
More informationPowerscreen Premiertrak 300. Jaw Crusher. SPECIFICATION - Rev 4. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 4. 01/01/2015 Specification Premiertrak 300 Total weight 35,180kg (77,558lbs) *including magnet & dirt conveyor. Transport Length 14.6m (47 11 ) Width 2.55m (8 5 ) Height
More informationCLEATED INCLINE CONVEYOR OPERATION MANUAL
CLEATED INCLINE CONVEYOR OPERATION MANUAL SERIAL NO. DATE OF MANUFACTURE EQUIPMENT DESCRIPTION CLEATED INCLINE CONVEYOR The Cleated Incline Conveyor is a portable belted feed device. It is designed to
More informationPowerscreen Premiertrak 600. Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2017
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2017 Specification Premiertrak 600 Total weight 68,875kg (151,843lbs) including magnet & dirt conveyor. Transport Length 17.1m (56 1 ) Width 3.0m (9 10 ) Height
More informationPowerscreen Premiertrak 400 & R400. Jaw Crusher. SPECIFICATION - Rev 6. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 6. 01/01/2015 Specification Premiertrak 400 Total weight 45,260kg (99,781lbs) including magnet & side conveyor Transport Length 15.2m (49 10 ) Width 2.8m (9 2 ), 4.3m (14
More informationPowerscreen Premiertrak 400 & R400. Jaw Crusher. SPECIFICATION - Rev 8. 01/01/2017
Jaw Crusher SPECIFICATION - Rev 8. 01/01/2017 Specification Premiertrak 400 Total weight Tier 3: 45,260kg (99,781lbs) including magnet & side conveyor Transport Length 15.37m (49 11 ) Tier 4F: 46,000kg
More informationTM15 - LP15. Mobile Rockbreaker AT A GLANCE OPTIONS FEATURES & BENEFITS
TM15 - LP15 Mobile Rockbreaker FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 45,100 lb (20,500 kg) 32-0 (9.7 m) 7-1 (2.16 m) Tramming Height
More informationPRODUCT SPECIFICATION CONVEYOR RANGE
PRODUCT SPECIFICATION CONVEYOR RANGE www.terex.com/ecotec TSC 65T & TSC 80T Terex Ecotec s range of mobile conveyors are designed to work in conjunction with the existing Ecotec product portfolio. Using
More information694+ Dual Power Supertrak
R 694+ 694+ Dal Power Spertrak SPECIFICATION: Screen Size: 6100mm x 1530mm (20 x 5 ) Top, Middle & Bottom deck screenbox Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 130hp (97kW) Tier 4i / Stage
More informationCRAWLMASTER 1208i THE INTELLIGENT CRUSHING UNIT ON CRAWLERS SANDVIK ROCK PROCESSING
CRAWLMASTER 1208i THE INTELLIGENT CRUSHING UNIT ON CRAWLERS SANDVIK ROCK PROCESSING INTELLIGENCE on crawler tracks What can CRAWLMASTER 1208i do for you? Crawlmaster 1208i is the new generation of the
More information