APPENDIX A GROUP 4 SPECIFICATION, JEA CLASS 213MH: Truck / 3T BUCKET / MATERIAL HANDLER
|
|
|
- Rosalind Wilkinson
- 5 years ago
- Views:
Transcription
1 1. SCOPE It is the intent of the JEA to purchase FOUR (4) 3T 4X2 EXTENDED CAB BUCKET TRUCK / MATERIAL HANDLERS. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209) in complete operational condition, with all required equipment and documentation by SEPTEMBER 25, Liquidated Damages ($30.00 Per Day Per Unit) start SEPTEMBER 25, MODEL: New, current model year production Class-7 Extended CAB / Chassis (INTERNATIONAL 4400 or Equal Due To Lower CAB Height Requirement) with 55 Two Man, Insulated Ariel Attachment with Articulation Material Handling JIB (ALTEC AA55E Attachment or Equal). Reference: JEA Unit # for General Layout/Design Details and clarification. 3. CAB / CHASSIS (CLASS-7). EXTENDED CAB PAGE 1
2 3.1 Class-7 Single Axle Cab/Chassis (37,000 LB GVWR). 3.2 CA: Not to Exceed WB: Not to Exceed 220". 3.4 Overall Height from Level Ground to Highest Point on Vehicle Not to Exceed Overall Length: Not to Exceed Set Max Speed at 72 MPH. 4. ENGINE (REQUIRE CUMMINS ISL9 DUE TO RELIABILITY / DURABILITY) 4.1 Horse Power: Minimum 330 HP. 4.2 Torque Range: Minimum 750 lbs. to 1000 lbs. 4.3 No Automatic Idle Shutdown. 4.4 Block Heater. 4.5 Engine warning and shut down system. 5. TRANSMISSION 5.1 Allison RDS PTO Provision 6. REAR AXLE (AIR RIDE) 6.1 Air Ride / 23K with manual dump valve. 6.2 Locking Differential. 7. FRONT AXLE (RATED FOR GVWR) 8. TIRES ,600 lb. with Oil Bathed Bearing/Hubs. 8.1 REAR: 11R 22.5 to accommodate GVWR, All Terrain Tread. 8.2 FRONT: 12R 22.5 to accommodate GVWR, All Terrain Tread. 9. BRAKES (AIR DISC BRAKES) 9.1 Air Disc Brakes with Shields. 9.2 Anti-lock braking system. 9.3 Automatic drain valves PAGE 2
3 9.4 Air Dryer. 9.5 Low air pressure warning system. 10. COOLING SYSTEM 10.1 Heavy duty extra cooling capacity, largest available from manufacturer. 11. FUEL TANK 11.1 CAPACITY: Minimum 80 gallons useable fuel capacity. 12. CHASSIS ELECTRICAL AND LIGHTING (NO SCOTCH LOCK CONNECTIONS) NOTE: WIRE ALL LED STROBE LIGHTS TO ONE OEM UP-FITTER SWITCH IN CAB with Label. WIRE ALL BIN LIGHTS TO ONE OEM UP- FITTER SWITCH. WIRE ALL AREA LIGHTS TO ONE UP-FITTER SWITCH. ALL LIGHTING IS REQUIRED TO BE LED Meters: Engine hour meter, PTO hour meter, transmission temperature, engine oil pressure, engine temperature, charging system, fuel level, air pressure and diesel exhaust fluid level (In Cab / Dash Mounted) OEM UP-FITTER SWITCHES/UPPER CONSOLE: For wiring Strobe Lights, Area Lights & Etc Auxiliary / Accessory Fuse BLOCK/Lugs: To wire GPS, Fuel Rings, JEA RADIO, DC Accessory Power Outlets & Etc. See Example Below. Wire to Waterproof Resettable Breaker so we can isolate from vehicle if needed. Blue Sea Systems ST Blade ATO/ATC Fuse Blocks Style Name: 12-Circ Split w/cover & Neg PAGE 3
4 12.4 MASTER SWITCH WITH LOCKOUT/TAGOUT: In Cab, (Mitigate Dead Batteries Due To GPS & Etc.). EXAMPLE: TR SERIES DUAL POLE MASTER DISCONNECT SWITCH (500A DPST IP67/IP69k Integrated Lockout Tagout) All Cab / Chassis Lights: LED ONLY Corner Mounted LED Strobe Slights & 2 Recessed Amber LED Strobe Lights (3 or 4 Round) mounted outside/center of Utility Body (1 on DS & 1 on PS) Auxiliary Battery Jump Ports: Insulated remote posts protected and mounted Drivers Side underneath cab body / behind steps. (Do not mount over fuel tank!) DC Accessory Power Outlets: THREE DC Power Outlets in cab for accessories with spring loaded cover (For Cell Phone Chargers & Etc.). See example below (NAPA Part Number & Picture): NAPA Part # BK or equal. Power/Wire to the Auxiliary / Accessory Fuse BLOCK 12.9 LED Post Mounted Spot Light, Drivers Side (2) LED GO-LIGHTS / Remote Controlled: 1 mounted RF Overhead Guard & 1 mounted RR Overhead Guard POWER PACKAGE: Power Windows, Locks, Mirrors (Heated), Cruise Control & Tilt Wheel PAGE 4
5 12.12 Factory installed air conditioner and heater Backup Camera (7 or 8 Color Monitor) and Backup Alarm AM / FM / Weather Band Stereo with Auxiliary Input and Bluetooth/Hands Free. 13. ADDITIONAL REQUIRED EQUIPMENT 13.1 Front bumper Air Ride Driver s Seat and Air Ride Passengers Seat with Collapsible Armrest and Head Rest EXTENDED CAB REAR SEAT: Full Width Bench Seat with Storage Tow/Recovery Hooks: Front & Rear (2) Two fender/hood mounted mirrors (Passenger & Drivers Side for Blind Spots) Window Tint: driver, passenger & rear windows (Max Legal in FL) Cup Holders: Minimum Interior / Forward / Roof Mounted Console with storage compartments. 14. TOWING 14.1 Tow PACKAGE / Pintle Hook: Heavy Duty 25 Ton Swivel OFF ROAD and Safety Chain D-Rings 14.2 Tractor Protection Valve: Include Collapsible Glad Hands and Trailer Hand Valve Trailer Receptacles (3 Receptacles): 7 Pin Round Trailer Receptacle, 7 Pin Round Heavy Duty Truck Trailer Receptacle (ABS) and a 7 Pin RV Trailer Receptacle PAGE 5
6 15 BOOM ATTACHMENT With 2 MAN END MOUNTED INSULATED BUCKET With Attached Articulating Material Handler/JIB (Altec AA55E or EQUAL) BOOM: 55, Ground to bottom of Platform SIDE REACH: Between 42.8 and WORKING HEIGHT: Between 60 and PAGE 6
7 15.4 Extended Reach Lower Boom (180 Degree Rotator/Bucket): Must be able to position the Bucket Ground Level (Enter/Egress from Ground Level) DC Pump: Secondary Stowage System (Emergency Backup) Outrigger Boom Interlock Fiberglass Chain Saw Holder (JEA Standard). Mounting Location TBD 15.8 Hydraulic Oil Cooler Dual Tool Circuit with Dripless Quick Connects & Tool Selector Valve with flow & pressure to accommodate JEA Tools (Saws, Impact Wrenches & Etc.) Platform Liner (JEA Standard) Engine Start/Stop Switch Platform/Bucket Capacity: 700LBS Lanyard Attachment Points (Painted Blue) Spring loaded platform rest with rubber pad Automatic Boom Latch Outriggers: Full Hydraulic Rated for Boom Capacity with alarms Include Additional/Spare Bucket, Bucket Liner & Bucket Cover JIB Capacities: 750 LBS Extended & 2000 LBS Retracted JIB Winch Line: 80 to accommodate Jib/Boom rated Capacities JIB Articulation: -30 Degree to 90 Degree. 16. UTILITY BODY & CAB GUARD (REFERENCE JEA UNIT # TO CONFIRM MOUNTING LOCATIONS / DIMENSIONS) 16.1 Approximately 170 Long X 94 Wide X 46 High with Secondary Bin Lock System (Accommodate Pad Locks) Recessed Round LED Lights: 1 mounted inside/centered Utility Bed on Drivers Side, 1 mounted inside/centered on Passenger Side & 1 mounted inside/centered Step Well on Passenger Side. (Adjust location as needed to accommodate for hydraulic tank location & bin locations) LED Body Compartment Rope Lighting: All Utility Bins Full Cab Guard (Coated with Line X or Equal) LED Flood Lights: adjustable & mounted to Top/Cab Guard facing cargo area Polymer Outrigger Pads with Storage Compartments (Compartments Mounted Under Utility Body (2 DS & 2 PS) PAGE 7
8 16.7 JEA Standard Aluminum Water Keg Holder (Full Circle Aluminum) Red/White Reflective Tape: A Shaped/JEA Standard Nonskid Coating: All Steps & Walking Surfaces Collapsible Cone Holder (JEA Standard). Front Bumper Mounted Integrated Wheel Chock Bins with Wheel Chocks Ladder Rack (JEA Standard) mounted Topside of Drivers Side Body Compartment (Powder Coated / Steel) Aluminum Rubber Goods Bin (JEA Standard) mounted inside utility bed, drivers side & accessible from rear of unit (16.5 H X 12 D X 76 L). Rear mounted door Aluminum Hand Wash Tank with ball valve mounted right rear of unit under bucket entry steps Bulkhead Box/Bin (56 L X 48 W X 24 High) Blanket Bin: Top access with lockable lid mounted Inside Utility Bed / Passenger Side between Pedestal & Utility Body L Tail Shelf with 3 Steel Retaining Rail (Corner Wash Out Voids) with ICC Bumper with integrated grip strut steps. No Cable Mounted Steps Access Steps: Body floor & platform Utility Body Bin Shelving, Hooks & Layout: Reference JEA # Gas Shock Door Holders in Body Compartments Sprayed In Bed Liner (LINE X or Equal): Inside Bed, Inside Bed Sides & Top of Utility Body. Spray Inside floors of all Utility Bins up to 8 on Walls Require recessed D-Ring Tie Downs inside / on the sides of the utility bins (3 to 4 From Top of Utility Body). (4) On the driver s side & (2) on the passenger side spaced evenly Utility Body Bins & All Other Bins: Paint Interior White. 17. ADDITIONAL EQUIPMENT REQUIRED 17.1 CAB Guard MOUNTED LED Strobe Lights (Top/Front Corners, PS & DS). With Guards PAGE 8
9 17.2 LED Ground Lighting / Area Lights (Drivers Side, Passengers Side & Rear of Vehicle) Doc Bumpers: fixed mounted to rear frame rails Slope Indicator Assembly Lanyard & Lanyard Storage Pouch Operator Manual Storage Pouch. 18. POWER INVERTER (2400 Watt Pure-Sine Wave) 18.1 Mounted Inside PS / Right Front Utility Bin. Ignition Key Hot Weatherproof GFI 120V Dual Power Outlet mounted Right Rear of Utility Body. 19. COLOR / GRAPHICS 19.1 White exterior Delete all vendor and manufacturer identification decals except required safety & reference identification tags, decals, data plates & placards. 20. MANUALS, VIDEOS, KEYS & OPERATOR ORIENTATION 20.1 (1) set of operator manuals per unit (HARD COPY). (1) Electronic Copy maintenance, repair & parts manuals (5) complete sets of keys per unit (Including Attachments, Bins & Tool Boxes). Key All CAB/CHASSIS Alike (Ignition & Cab Doors). Key All Bins & Tool Boxes Alike. Stamp/Engrave JEA PROVIDED 5 Digit Unit Number On All Keys (1) On-Site JEA Operator Orientation Class (Complete Unit Overview: Chassis & Attachments) (1) On-Site JEA Maintenance Orientation Class (Complete Unit: Chassis & Attachments) Include a paper copy Specification / Build Sheet / Drawings in all units including Key Codes. 21. DRAWINGS 21.1 Scaled Drawings will be provided to JEA upon receipt of order. Drawings will include all interior/exterior and equipment layout details & dimensions. Final Drawings / Layout will be approved by JEA before work is started. Include one electronic copy (Flash Drive). 22. WARRANTY 22.1 Minimum (1) One Year warranty on Chassis & All Attachments (Include Parts, Travel & Labor). Must include all standard manufacturer warranties. 23. OTHER REQUIREMENTS 23.1 Purchase / Install CITY License Plates PAGE 9
10 23.2 Install JEA provided Branding / Decals Install JEA provided required safety equipment: purple-k fire extinguisher, first aid kit and key safe Current DOT Inspection / Certification with Decal installed lower left inside corner of windshield Must include/document the Vin Number, Make, Model & Description on all invoices & Change Order Invoices Install Vehicle Height Warning Placard with Maximum Height (Feet / Inches) in cab on the dash (Drivers View). NOTE: All Units, Attachments, Products & Services must meet & comply with all applicable regulations and specifications including but not limited to Federal and State Laws, OSHA Regulations, ANSI Standards, DOT Regulations and ASTM Standards. All Units must be delivered to the JEA Fleet Facility with a minimum ¾ tank of fuel. Contact Mark Murray at Hours prior to delivery. Delivery times are Monday through Friday 08:00 AM 03:00 PM at 5717 New Kings Road Jacksonville Florida, PAGE 10
Appendix A Group 3 SPECIFICATION, JEA CLASS 133: Truck / 3T CARGO REEL FLAT BED
1. SCOPE It is the intent of the JEA to purchase THREE (3) 3T 4X2 CARGO REEL FLATBED UNITS. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209)
APPENDIX A GROUP 2 SPECIFICATION, JEA CLASS 212C: Truck / 3T BUCKET CUT IN
1. SCOPE It is the intent of the JEA to purchase TWO (2) 3T 4X2 BUCKET TRUCKS. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209) in complete
Appendix A Group 4 SPECIFICATION, JEA CLASS 135: 14 CUYD DUMP Truck
1. SCOPE It is the intent of the JEA to purchase TWO (2) 5T 6X4 14 to 16 CUYD DUMP TRUCKS with 66,000 LB GVWR. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville,
TBD-18 APPENDIX A GROUP 4 SPECIFICATION, JEA CLASS 223: Truck / 3T DIGGER DERRICK WITH EZ TRAC UPDATED AUGUST 03, 2018
1. SCOPE It is the intent of the JEA to purchase TWO (2) 3T 4X2 EXTENDED CAB DIGGER DERRICK TRUCKS with EZ Trac Hydraulic Front Wheel Drive System. All units must be tested and delivered to JEA Fleet Facility
APPENDIX A TECHNCIAL SPECIFICATIONS
1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of four (4) five ton 6X4, 14 to 16 cubic yard dump trucks, all new current model
ADDENDUM 3 - APPENDIX A - TECHNICAL SPECIFICATIONS ONE (1) 3 TON 4X2 CARGO REEL CAB/CHASSIS
1. SCOPE It is the intent of the JEA to purchase ONE (1) 3T 4X2 CARGO REEL REGULAR CAB/CHASSIS (Chassis Only). Truck Chassis must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville,
Appendix A Group 1 SPECIFICATION, JEA CLASS 142: Truck / 3T VACUUM JET UPDATED AUGUST 03, 2018
1. SCOPE It is the intent of the JEA to purchase ONE (1) 3T 4X2 Vacuum Jet Truck. All trucks must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209) in complete
Appendix A - Group 8 SPECIFICATION, JEA CLASS 122+: ONE TON SRW 4X4 8 UTILITY BODY Extended Cab Unit UPDATED August 10, 2018
1. SCOPE It is the intent of the JEA to purchase EIGHT (8) ONE Ton FORD F-350 Extended Cab SRW 4X4 with BRAND FX 56LS 8 COMPOSITE UTILITY BODYs with Various Configurations, Up-Fits and Options. All units
1. SCOPE 2. MODEL: 3.1 Base Curb Weight: not to exceed 7800 lbs. PAGE 1 OF 6
1. SCOPE It is the intent of the JEA to purchase FOUR (4) 3/4 Ton LWB Pickup / Utility Trucks with various up-fits and options (two (2) Fleet Side Pickup Bodies and two (2) Utility Bodies). All units must
Appendix A - Group 7 SPECIFICATION, JEA CLASS 119+: ONE TON SRW 4X4 PICKUP Extended Cab Unit UPDATED August 10, 2018
1. SCOPE It is the intent of the JEA to purchase TWO (2) ONE Ton FORD REGULAR GAS EXTENDED CAB SRW 4X4 Pickup Trucks with Various Configurations, Up-Fits and Options. [ONE LWB 8 and ONE SWB 6 6 ] All Units
APPENDIX A GROUP 2 SPECIFICATION, JEA CLASS 116: HALF TON 4X2 SWB (6 6 Bed) PICKUP TRUCK Standard Cab Units UPDATED JUNE 12, 2018
1. SCOPE It is the intent of the JEA to purchase FIFTEEN (15) HALF-TON 4X2 Standard Cab SWB (6 6 Bed / ALL UNITS) Pickup Trucks with Various Configurations, Up-Fits and Options. [15 Standard Cab]. All
APPENDIX A TECHNICAL SPECIFICATIONS Purchase of all New 2018 Model Year, Two (2) Vacuum Jet Trucks UPDATED November 20, 2017
1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of two (2) vacuum jet trucks, all new 2018 model year. All new 2018 model year,
Appendix A Group 2 SPECIFICATION, JEA CLASS 143: Truck / 5T VACUUM JET
1. SCOPE It is the intent of the JEA to purchase ONE (1) 5 Ton 6X4 Vacuum Jet Truck. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209) in complete
APPENDIX A TECHNICAL SPECIFICATIONS Purchase of all New 2018 Model Year, Nineteen (19) Half Ton Standard Cab 4x2 Pickup Trucks
1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of nineteen (19) half ton standard cab 4x2 pickup trucks, all new 2018 model
APPENDIX A GROUP 6 SPECIFICATION, JEA CLASS 122: ONE TON SRW 4X4 PICKUP
( Asset Coordinator Truck) 1. SCOPE It is the intent of the JEA to purchase ONE (1) ONE Ton FORD DIESEL EXTENDED CAB SRW 4X4 Pickup Truck 8 BED with Various Configurations, Up-Fits and Options. Unit must
3. CHASSIS (FORD TRANSIT 350HD / DIESEL / HIGH TOP / EXTENDED LWB / 4X4 / DUAL REAR WHEEL VAN)
1. SCOPE It is the intent of the JEA to purchase (2) Two one (1) Ton Heavy Duty / Diesel / High Top / Extended LWB / Quigley 4X4 Conversion / Dual Rear Wheel Transit Vans with various up-fits and options.
1. SCOPE 2. MODEL: 3. CHASSIS (CREW CAB 4X4 DIESEL) 3.1 Base Curb Weight: not to exceed 7000 lbs. 3.2 WB: / Short Wheel Base.
( Asset Coordinator Trucks) 1. SCOPE It is the intent of the JEA to purchase TWO (2) ONE Ton RAM DIESEL CREW CAB SRW 4X4 Pickup Trucks 6 6 BED with Various Configurations, Up-Fits and Options. All units
SPECIFICATION, JEA CLASS 117: HALF TON 4X4 SWB (6 6 Bed) PICKUP TRUCK Crew Cab & Standard Cab Units UPDATED JULY 27, 2018
1. SCOPE It is the intent of the JEA to purchase TWENTY SEVEN (27) HALF Ton 4X4 SWB (6 6 Bed / ALL UNITS) Pickup Trucks with Various Configurations, Up-Fits and Options. [19 Crew Cab and 9 Standard Cab].
Appendix A Group 1 SPECIFICATION, JEA CLASS 131: 18 WALK IN VAN (JEA ELECTRIC)
1. SCOPE It is the intent of the JEA to purchase TWO (2) 18 WALK-IN VAN. VANS must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209) in complete operational
SPECIFICATION, JEA CLASS 133+ UP-FITS, DESIGN/BUILD: FLATBED/CAB GUARDS, REEL ATTACHMENTS, FABRICATION / ASSEMBLY ETC. UPDATED July 05, 2018
1. SCOPE It is the intent of the JEA to award a contract to DESIGN/BUILD/INSTALL Flatbeds with Cab Guards, Three Independently Removable Reel Stands with Complete Tow Package/Off-Road Hitch Assembly s
SPECIFICATION, JEA CLASS 421: TRAILER MOUNTED BULL WHEEL TENSIONER UPDATED APRIL 25, 2018
1. SCOPE It is the intent of the JEA to purchase One (1) Bull Wheel Tensioner (Full Hydraulic) with On-Board Operator Station (TURN KEY / COMPLETE / OPERATIONAL). Purpose: Fiber Optic Cable (CAIFO144,
1. SCOPE 2. MODEL: 3. CHASSIS. 3.1 Base Curb Weight: not to exceed 5,500 lbs. 3.3 WB: All Units Short Wheel Base. 3.5 Height: Not to exceed 76.
1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of twenty nine (29) half ton, standard cab/super cab/crew cab 4x4 pickup trucks,
1. SCOPE 2. MODEL: THURMAN C MCGLOTHLIN
1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of twenty three (23) one ton, diesel, standard cab dually, 4x2 utility trucks,
SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs
Page 1 of 5 SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs Insulated Telescopic Articulating type aerial lift with the following
1. SCOPE 2. MODEL THURMAN C MCGLOTHLIN
1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of four (4) conventional tail swing compact hydraulic tracked mini excavators,
GALLATIN PUBLIC UTILITIES
GALLATIN PUBLIC UTILITIES Bid Proposal Item: Single Axle Dump Truck Bid Date: Company Address: Phone Number: Manufacturer: Bid Information (1) Prices F.O.B., 249 Hancock Street, Gallatin, Tennessee 37066.
2017 MT-55 Chassis Specifications
2017 MT-55 Chassis Specifications LDV, Inc. Mobile Tools Stores 20 Franchise Assistant Program Vehicle Specification Engine 1. Diesel, Cummins ISB, 6.7 L, 220 HP, 520 ft-lb torque 2. 2010 EPA CARB emissions
Truck Specs. Sabre 9 Off-Highway GCWR: 242,000. CapacityTrucks.com
Truck Specs Sabre 9 Off-Highway GCWR: 242,000 CapacityTrucks.com Sabre 9 / Off-Highway - Base Model Base Model Sabre 9 / Off-Highway Basic Overview GCWR: 242,000 Basic Overview Axle: 4x2 Basic Overview
Line Body Canopy and Accessories:
ATTACHMENT A Heavy Crew Truck Line Body and Accessories Installation. TMWA provided cab & chassis specifications are provided on last page The Cab & Chassis will be a Freightliner (All Other Items Referenced
CITY OF ELKO, NEVADA REQUIREMENTS, SPECIFICATIONS AND CONTRACT DOCUMENTS TO FURNISH
CITY OF ELKO, NEVADA REQUIREMENTS, SPECIFICATIONS AND CONTRACT DOCUMENTS TO FURNISH July 2016 CITY OF ELKO FACILITIES DEPARTMENT SET NO.. TABLE OF CONTENTS Invitation to Bid... 1 Bidding Information...
190 /58 m. 202 /62 m. Ride-Around Seated Main Boom Length
E190 E190 SIDE VIEW DIAGRAM Working Height Without Jib 190 /58 m Overall Height Working Height With Isolating Jib 202 /62 m Operator Controls Ride-Around Seated Main Boom Length 170 /52 m Outrigger Type
NOTICE OF BID. The City of Pigeon Forge is receiving bids on three trucks for the Public Works Department.
NOTICE OF BID The City of Pigeon Forge is receiving bids on three trucks for the Public Works Department. Specifications may be obtained from the Public Works Department in City Hall between the hours
PROPOSAL NUMBER Q
September 18, 2017 VE Demo Unit Attention: We are pleased to present our proposal to furnish and install a VERSALIFT MODEL SST36NE aerial device, with a Dakota body, mounted on a 2018 Ford F-450 chassis,
TECHNICAL SPECIFICATIONS
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach 207'/63,1 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 40,300 lbs/18 280 kg Jib
E145 TECHNICAL SPECIFICATIONS E145 SIDE VIEW DIAGRAM. Maximum Working Height. Overall Height Main Boom Length. 145 /44,2 m.
E145 E145 SIDE VIEW DIAGRAM Maximum Working Height 145 /44,2 m Overall Height Main Boom Length 125 /38,1 m Operator Controls Ride-Around Seated Outrigger Type Front Out-Down EZ-CRIB Powered Boom Sections
Aerial Units. Contract end Date
Aerial Units Contract end Date 09-30-18 Vendor Name: Altec Industries Inc. Contact Person: Clint Bitting Street Address: 1255 Port Terminal Drive P.O. Box: NA City, State, Zip Duluth, MN 55408 Phone #:
REQUEST FOR QUOTE. Half Ton Trucks CONTRACT NO ADDENDUM NO.2
REQUEST FOR QUOTE Half Ton Trucks CONTRACT NO. 19-130080-01 ADDENDUM NO.2 ISSUE DATE: March 15, 2019 1.0 GENERAL This addendum forms part of the contract documents and is to be read, interpreted and coordinated
FLAT BED STAKE BODY TRUCK
Group 1 Contract Attachment 4 Price Sheet: Dump Trucks Please see Attachment D: Instruction and General Information for Instructions, Color Key, and Reference Key. GVWR* Code 2 Base Vehicle Description3
Request for New Heavy Duty 3/4 ton Pickup Truck for Lee County Emergency Management
General: The attached specification is to aid in the purchase of an efficient and dependable 4-wheel drive pickup truck for the Office of Lee County Emergency Management. Bids must be submitted to Lee
TMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
NOTICE OF BID. The City of Pigeon Forge is receiving bids on four trucks for the Public Works Department.
NOTICE OF BID The City of Pigeon Forge is receiving bids on four trucks for the Public Works Department. Specifications may be obtained from the Public Works Department in City Hall between the hours of
AT37G 37 FT AT41M 41 FT TA50 50 FT AN55E- OC 55 FT LR FT Options
AT37G AT41M TA50 AN55E- OC LR7-60 Options 37 FT 41 FT 50 FT 55 FT 60 FT PRICING PAGE Aerial Units Contract end Date 11-30-17 Vendor Name: Altec Industries Inc. Contact Person: Clint Bitting Street Address:
TMS x 4 & 6 x 6
TMS5 6 x 4 & 6 x 6 Dimensions 8' (2438) TAILSWING 11' 1" (3383) 7' 8" (2337) RET 13' 9-3/4" (4210) MID EXT ' (96) EXT Note: ( ) Reference dimensions in mm 16-3/4" (425) 43' 4" (13 8) OVERALL 10' 10" (32)
Coastside County Water District Board of Directors. Purchase of a New Service Truck from Summit Truck Equipment
STAFF REPORT To: From: Coastside County Water District Board of Directors Dave Dickson, General Manager Agenda: July 11, 2017 Date: July 6, 2017 Subject: Purchase of a New Service Truck from Summit Truck
Pennsylvania State Police Tactical Mounted Unit. 25,500# GVWR Crew Cab Tractor
Pennsylvania State Police Tactical Mounted Unit 25,500# GVWR Crew Cab Tractor The following pages specify the design and component requirements for a crew cab truck tractor. In addition to the vehicle
Zip's Truck Equipment. 316 W. Milwaukee Street New Hampton, Iowa Phone: Fax: Visual Inspection.
Zip's Truck Equipment 316 W. Milwaukee Street New Hampton, Iowa 50659 Phone: 641-394-3166 Fax: 641-394-4044 Visual Inspection Page: 1 of 6 Customer: Address: Division: Phone: null Reference #: 2NPRLZ9X37M730087
INSP Aerial Periodic Inspections
The Aerial Periodic Inspection course features five individual segments covering the Terex Utilities Aerial Platform Periodic Inspections. The training outlines the Terex Utilities inspection form as well
50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height
50105R 50105R SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 164'/50 m 360 Degrees 100,000 lbs/45,359 kg 105
View thousands of Crane Specifications on FreeCraneSpecs.com
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 201'/61.3 m 360 Degrees 80,000 lbs/36,287 kg 142
TECHNICAL SPECIFICATIONS
45127 45127 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 192'/58,5 m 360 Degrees 90,000 lbs/40 823 kg 127
40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area
40142R 40142R SIDE VIEW DIAGRAM Maximum Vertical Reach 210'/64 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 41,700 lbs/18 915 kg Jib
43' (13.07) 18' 4" (5.59 ) 18' 6" (5.64) Turning Radius: TMS870-45' 1" (13.7 m) TTS870-29' 8" (9.04 m) (8 wheel)
Dimensions 14' 1/2" (4.28) TAILSWING 7' 7" (2.77) O/R RET. 8' 6" (2.59) 15' 5" (5.64) O/R PART. EXTENDED 24' (7.31) ' 6" (4.5) RETRACTED 137' 9" (1653.62) EXTENDED 43' (13.07) 11' 8-1/4" (3.56) 1' 8" (0.53)
TRUCKS + TRAILERS TRUCKS + TRAILERS. Call for rates and reservations
Pick-up Trucks, Vans, Stake Body Trucks Dump Trucks, Water Trucks, Speciality Trucks Tilt Trailers, Utility Trailers and Dump Trailers 142 Call 888-777-2700 for rates and reservations PICK-UP TRUCKS TRUCKS
IC-400-3A. Tech Spec. Industrial Crane. 25-Ton Max. Capacity (22,700 kg) Manufacturing Corp. Rated Capacity Limiter... Standard
Tech Spec IC-400-3A Industrial Crane 25-Ton Max. Capacity (22,700 kg) Rated Capacity Limiter... Standard Capacity on Outriggers... 50,000 lbs (22,700 kg) Pick and Carry Capacity... up to 24,400 lbs (11,000
INVITATION TO BID. Should you need clarification on any item, please contact Berley Mears, Public Works Director at
INVITATION TO BID July 28, 2017 Dear Vendor, Enclosed you will find a bid package for a 2017 One-Ton 4 X 4 Dump Truck and Snow Plow for the City of Seaford. All pertinent information is contained within.
COLLEGE COMMUNITY SCHOOL DISTRICT BID SHEET. THREE (3) 78 PASSENGER TRANSIT STYLE SCHOOL BUSES and ONE (1) 65 PASSENGER LIFT BUS
COLLEGE COMMUNITY SCHOOL DISTRICT BID SHEET THREE (3) 78 PASSENGER TRANSIT STYLE SCHOOL BUSES and ONE (1) 65 PASSENGER LIFT BUS Bid #1 Three (3) 2010 (78) Passenger Transit Style School Buses and One (1)
Mantis Rerailer General Specifications
2008 General Specifications 1. Typical Operating Parameters 2. General 1.1 Operating temperatures will typically be between 20 F (7 C) to 110 F (43 C). 1.2 Relative humidity ranges between 20% and 100%.
Aerial Units Contract end Date
Aerial Units Contract end Date 09-30-18 Vendor Name: Aspen Equipment Co Contact Person: Mark Lundeen Street Address: 9150 Pillsbury Ave. South P.O. Box: City, State, Zip Bloomington, MN 55420 Phone #:
32117R TECHNICAL SPECIFICATIONS 32117R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height
32117R 32117R SIDE VIEW DIAGRAM Maximum Vertical Reach 153'/46,6 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 64,000 lbs/29 030 kg Boom Length 117 /35,6 m Crane Weight (Standard)
LET THE EXPERTS AT V&H EXCEED YOUR EXPECTATIONS.
RENTAL CATALOG LET THE EXPERTS AT VH EXCEED YOUR EXPECTATIONS. Since 1966, VH Inc. has excelled as a full service company. We serve local, regional and national customers. Our goal is to supply task-specific
WORK READY TRUCK CATALOG
WORK READY TRUCK CATALOG RAILROAD WORK READY TRUCK CATALOG Spec 10 Supervisors Vehicle, Pickup Spec 25 Crew Cab Long Bed Pickup Spec 25S Crew Cab Short Bed Pickup Spec 26 Extended Cab Long Bed Pickup Spec
Warranty - Standard Equipment & Specs
Warranty - Standard Equipment & Specs Warranty Basic Distance Unlimited miles Months 24 months Powertrain Distance Unlimited miles Months 24 months Corrosion Perforation Distance Unlimited miles Months
Black plate (27,1) Index 14 北米Model "A3180BE-B" EDITED: 2014/ 2/ 7
Index 14 14-2 Index A Abbreviation... 3 ABS (Anti-lock Brake System)... 7-20 Warning light... 3-15, 7-21 Accessories... 5-2, 11-36 Accessory power outlet... 6-10 Active head restraint... 1-6 Air cleaner
VEHICLE SPECIFICATIONS 12 PASSENGER OFF CENTER AISLE VAN REV 02/19
NOTE: Accepting options to purchase 12 Passenger Off Center Aisle Vehicle with seating arrangements for 12 Ambulatory Passengers. DESCRIPTION: These specifications describe a new 12 Passenger Off Center
CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
ADDENDUM 2. The following clarifications, changes, additions, and/or deletions are hereby made to the RFB:
Date: January 2, 2018 ADDENDUM 2 RFB No: FS-07-18 / Haul Truck Bid Date: January 11, 2018/2:00 PM Local Time The following clarifications, changes, additions, and/or deletions are hereby made to the RFB:
Heavy-Duty Truck Bodies and Truck Tool Boxes for Tree Care and Landscape Professionals
Heavy-Duty Truck Bodies and Truck Tool Boxes for Tree Care and Landscape Professionals THE FIRST CHOICE IN: Chip Bodies Utility Tree Vehicles UTV Truck Tool Boxes Landscape Bodies A CUT ABOVE THE REST
ABS Components Air Compressors Air Dryers & Cartridges Air Tanks. Air Disc Brakes Bearings Brake Pads Brake Rotors Brake Shoes & Kits Camshafts & Kits
Air Brake Systems ABS Components Air Compressors Air Dryers & Cartridges Air Tanks Air Valves Brass Fittings Composite Fittings Coiled Air Hoses Glad Hands Nylon Tubing Rubber Hose Tire Valves Brake &
1560F TECHNICAL SPECIFICATIONS 1560F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 3 Overall Height
1560F 1560F SIDE VIEW DIAGRAM Maximum Vertical Reach 90'/27,4 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 30,000 lbs/13 608 kg Boom Length 60 /18,3 m Crane Weight (Dry) 14,825 lbs/6725
Warranty - Standard Equipment & Specs
Warranty - Standard Equipment & Specs Warranty Basic Distance Unlimited miles Months 24 months Powertrain Distance Unlimited miles Months 24 months Corrosion Perforation Distance Unlimited miles Months
QUOTE For a 2017 Fire Department Conventional Truck Chassis-Water Tender With PTO Pump
Town of Wascott PO Box 159,Wascott, WI 54890 Phone: 715/466-4252 Email: wascott@centurytel.net QUOTE For a 2017 Fire Department Conventional Truck Chassis-Water Tender With PTO Pump Note: Bidders must
FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES
FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone 3/4 TON EXTENDED CAB PICKUP TRUCK - 4X2 (Specification #61) Base Unit Price ALT - Auto Nation Chevrolet
Zip's Truck Equipment. 316 W. Milwaukee Street New Hampton, Iowa Phone: Fax: Visual Inspection.
Zip's Truck Equipment 316 W. Milwaukee Street New Hampton, Iowa 50659 Phone: 641-394-3166 Fax: 641-394-4044 Visual Inspection Page: 1 of 6 Customer: Division: null Address: Phone: Reference #: 1GBKC34J9VJ103606
Remount Proposal. Everest Emergency Vehicles 1133 Rankin Street St Paul, MN Eric Olson
Remount Proposal Customer Dealer Everest Emergency Vehicles 1133 Rankin Street St Paul, MN 55116 651-236-8943 Eric Olson Module: INFORMATION 0.1.60 ****** Ambulance Re-chassis / Refurbish ****** * * Old
JOHN DEERE TURF & UTILITY PRODUCTS TRADITIONAL (WORK) UTILITY VEHICLES AND EQUIPMENT TS (Model Year 18) Equipment for Base Machine
TS (Model Year 18) Equipment for Base Machine ENGINE: 13 Engine HP *(401cc) Single Cylinder Air-cooled 4-Cycle Gasoline Overhead Valves Full Pressure Lubrication System (Filter Optional) Replaceable Single
REQUEST FOR QUOTATIONS
Public Works Department REQUEST FOR QUOTATIONS 12 14 YARD DUMP TRUCK PURCHASE Due: Thursday, July 27, 2017 No later than 2:00 P.M. Submit to: City of Arroyo Grande Attn: Public Works Department 1375 Ash
Heavy-Duty Truck Bodies and Truck Tool Boxes for Tree Care Professionals
Heavy-Duty Truck Bodies and Truck Tool Boxes for Tree Care Professionals THE FIRST CHOICE IN: Chip Bodies Removable Roof Chip Bodies Truck Tool Boxes A CUT ABOVE THE REST About ARBORTECH Established in
TMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
Titan 50 Series Crane Service Bodies Titan CA. Titan 50 84CA
Titan 50 Series Crane Service Bodies Titan 50 120CA Part Number 560750001 Description TITAN 50/120CA STD RIGHT SIDE CRANE Titan 50 84CA Part Number 560740001 Description TITAN 50/84 CA BODY ASS'Y 52" TALL
BID FOR ONE (1) 1 TON CREW CAB TRUCK WITH SERVICE BODY OPENING APRIL 11, 2019 AT 10:00 A.M.
P. O. B o x 1 5 4 0 T h o m a s v i l l e, G A 3 1 7 9 9 2 2 9-2 2 7-7 0 0 0 F A X 2 2 9-2 2 7-3 2 4 3 w w w. t h o m a s v i l l e. o r g BID FOR ONE (1) 1 TON CREW CAB TRUCK WITH SERVICE BODY OPENING
Mantis Rerailer. General Specifications
General Specifications 1. Typical Operating Parameters 2. General 1.1 Operating temperatures will typically be between -4 F (-20 C) to 122 F (50 C). 1.2 Relative humidity ranges between 20% and 100%. 1.3
CITY OF CORALVILLE th Street, Coralville, IA
CITY OF CORALVILLE 1512 7 th Street, Coralville, IA 52241 319-248-1740 REQUEST FOR BID THIS IS NOT AN ORDER STATE BELOW THE PRICE AND DELIVERY FOR ITEMS DESCRIBED HEREIN, BASED ON THE SPECIFICATIONS, TERMS
IC-200-G. Tech Spec. Industrial Crane. 15-Ton Max. Capacity Under 8 Feet Wide. Manufacturing Corp. Rated Capacity Limiter...
Tech Spec IC-2-G Industrial Crane -Ton Under 8 Feet Wide Rated Capacity Limiter... Standard Capacity on Outriggers... 3, lbs Pick and Carry Capacity... up to 17, lbs Height... 7 11 Width... 7 1-1/2 Boom
IC-200-F. Tech Spec. Unmatched in Features and Performance
Tech Spec IC-2-F Unmatched in Features and Performance * Rated Capacity Limiter...Standard * Capacity on outriggers..., lbs. * Pick and carry capacity... up to 17, lbs. * Height...7 11-1/2 * Width...8
NOTICE OF BID. The City of Pigeon Forge is receiving bids on one knuckle boom trash loader for the sanitation department.
NOTICE OF BID The City of Pigeon Forge is receiving bids on one knuckle boom trash loader for the sanitation department. Specifications may be obtained from the Public Works Department at City Hall between
HEAVY DUTY FIXED BOOM, XLT SERIES STANDARD BODY FEATURES
HEAVY DUTY FIXED BOOM, XLT SERIES Challenger's 6807(40 Ton) and 8807 (50 Ton) heavy duty fixed boom units were designed to provide the operator with additional boom reach for difficult recovery work. This
(978) TRAILER BROCHURE
BROCHURE www.allaccessequipment.com info@allaccessequipment.com (978) 712-4950 Steel Tow Bandit Trailer // Dual Axle Steel Tow Bandit Trailer // Dual Axle TECHNICAL SPECIFICATIONS Two 6,000 lbs capacity
TMS9000E. Preliminary. features. Product Guide. Truck Mounted Crane
TMS9000E features Preliminary Product Guide 110 ton (90 metric ton) capacity 36-142 ft. (11-43.3 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft. (10-17 m) manual offset bi-fold
MONTGOMERY COUNTY PUBLIC WORKS DEPARTMENT P. O. BOX 663 INDEPENDENCE, KANSAS PH FAX
MONTGOMERY COUNTY PUBLIC WORKS DEPARTMENT P. O. BOX 663 PH. 620-330-1170 - FAX 620-330-1177 MEMO To: From: Dump Truck Bidders Jim Wright Asst. Public Works Coordinator Date: February 23 rd 2016 Subject:
RT-300-B. Tech Spec. Preliminary Information. * 30,000 pounds capacity at 10 ft. radius. * 4-wheel drive. * 4-wheel steer
Tech Spec RT-300-B * 30,000 pounds capacity at 10 ft. radius * 4-wheel drive * 4-wheel steer * 360 degree continuous rotation * 60 ft. of full power main boom reach RT-300-2B CAPACITIES APPLY TO OPERATION
Tire Size 26.5 x 25 5' 5-1/2" (1661) 12' 2-1/4" (3715)
Dimensions 11' 13' 4" (64) TAILSWING 9' " (2997) OVER FENDERS 22' (66) FULL EXT 15' 9" (4801) MID EXT 9' 3-1/2" (2832) RET 9' 9-1/2" (2985) O/R A B C D E F G H 23.5 x 25 5' 4-1/4" (1631) 11' 11-1/2" (36)
NELSON COUNTY FISCAL COURT
NELSON COUNTY FISCAL COURT Specifications/Bid Forms FOR 25 CUBIC YARD REAR PACKER,REAR EJECTION, GARBAGE TRUCK DATE: 08/2017 ADVERTISEMENT FOR BIDS The Nelson County Fiscal Court will accept sealed bids
NORTH CAROLINA SHERIFFS ASSOCIATION
NORTH CAROLI SHERIFFS ASSOCIATION Name of Dealership Type of Vehicle Zone FORD F-250 XL CREW CAB 4X2 (Specification #79) Base Unit Price 2016 Ford Appalachia $24,541.37 2016 Ford Dogwood 2016 Ford 2016
City of Nicholasville Electric Department Bid # Hydraulic Digger Derrick Truck
City of Nicholasville Electric Department Bid #2016-095 Hydraulic Digger Derrick Truck The City of Nicholasville is accepting bids for the purchase of One (1) Hydraulic Digger Derrick Truck per the following
CRANE HOTSHEET ROUGH TERRAIN. Jesus Cedillo:
Rev. 12-27-11 CRANE HOTSHEET Jesus Cedillo: 305-477-8717 jesus.cedillo@ringpower.com www.ringpowercrane.com Item # Model Year Serial# Hours Description Price ROUGH TERRAIN 1. RT530E 2005 224572 One 2005
Courtesy of Crane.Market
CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load
Voyager MDR-235 Four Track Articulated Carrier Specifications
DIMENSIONS FOR COMBINED VEHICLE (2 SECTIONS) Overall Length 385" (9.78 m) Overall Width 99" (2.51 m) without mirrors Overall Height 109" (2.77 m) Ground Clearance 18" (45.7 cm) Curb Weight Payload GVWR
PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE
CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7
Invitation to Tender. District of Taylor MOTOR GRADER
Invitation to Tender District of Taylor MOTOR GRADER Sealed tenders clearly marked Motor Grader will be received by the District of Taylor up to 2:00 pm, local time Wednesday, September 17, 2014 at Council
KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.
KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning