1.8 Z 011-GMX WAFER TYPE BUTTERFLY VALVE Z 011- GMX.

Transcription

1 TECNICA DATA Nominal diameter: Face-to-face: EN Series 0 (DIN 0 T 1) ISO 7 Series 0 API 09 Table 1 BS 1 Series NF E Flange accommodation: DIN 1 PN ANSI B 1., Class 1 Flange Surface Design: DIN, Form A-E, ANSI RF Marking: DIN EN 19 Tightness check: DIN 0 T BO, BN (eakage Rate 1) ISO 0, Category API 9 Table ANSI B 1-, Class VI Temperature range: C to + 90 C (depending on pressure, medium and material) Operating pressure: max. bar Differential pressure: max. p bar Wafer type butterfly valve with special lining and disc for abrasive media. FEATURES - Shut-off and controlling of strong abrasive media, e.g. sand, cement, flue ash - igh abrasion strentgh of valve disc and seal - Two-part body - Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operational service. - Absolutely tight sealing with flow in either direction - Can be installed in any desired position. - Maintenance-free - Can be diassembled, material-specific recycling possible. GENERA APPICATIONS - Bulk handling technology - technology - Pneumatic conveying systems Z 011-GMX 1.

2 G F J B C D Z A 1 Di Z 011-GMX with bare shaft end E 0 1 Dimensions A B C D Di E F Flange G 1 J Z 9 90 F / 1 9 7, 90 F , 90 F , 90 F , 90 F , 90 F , 0 90 F F F , 1,9,.,,,, 17,0

3 ACTUATORS Z 011-GMX AND EVER and ever F II 90 9 III ,7 0,7 F WORM GEAR - 1- Gear J - II III 9 7 IV 9 0 V ,,,, The dimensioning of actuators refers to an operating pressure of bar. J EECTRIC ACTUATOR Actuator Type J M E E E The dimensioning of actuators refers to an operating pressure of bar. 17,0 1,0,0

4 ACTUATORS Z 011-GMX PNEUMATIC DOUBE ACTING / - - Actuator Type J EB EB EB 1 11 EB 1 1 EB ,7,,,,0 J The dimensioning of actuators refers to an operating pressure of bar and a control air pressure of bar. PNEUMATIC SPRING RETURN EBF Actuator J EB EB EB 1 11 EB 1 1 EB 1 19 EB ,0,0 7,7 1,, 7,0 J The dimensioning of actuators refers to an operating pressure of bar and a control air pressure of bar. SWITC BOX SERIES MS/NS MS: Switch box with integrated micro limit switches. NS: Switch box with integrated proximity switches

5 MATERIA SPECIFICATION AND PARTS IST Pt. 1 Description Material Body Aluminiumalloy G-AISiMg Seat GMX Polyurethan Bearing sleeve Brass MS Seal DIN 70 Copper Cu Plug screw DIN 90 G-XCrNiMo1- Set screw DIN 91 Steel galvanized A-70 Material-No ASTM 1.1 B Copper CFM BM Pt. 7 /9 11 Description Disc Coating Shaft O-ring NBR Washer Screw Material G-XCrNiMo1- GMX Polyurethan X1CrMoS17 XCrNiMo17-- Other materials upon request. Acrylonitrile butadiene rubber XCrNiM17-- A-70 A-70 Material-No ASTM CFM 0F 1 1 B BM

6 TORQUE - The torque values specified (MD) are based on liquid and lubricant media. - Powdery (non-lubricant) media Md x 1, - Dry gases/high viscous media Md x 1, - The values specified are based on the initial breakaway torque. - Dynamic torque specification available upon request / Operating pressure [bar] All values in Nm Regarding the dimensioning of actuators, please contact our engineers. v-vaues - The v -value (m per hour) is the flow of water at a temperature of C to 0 C (1 F to F) at p of 1 bar. - The v -values specified are based on tests carried out by the Delfter ydraulics aboratories, the Netherlands. - Permissible velocity of flow Vmax, m/s for liquids and Vmax 70 m/s for gases / Opening angle , The throttle function is linear at an angle 0 to Avoid cavitation! For further values, please contact our engineers. post@ebro-armaturen.com D