2.2 T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE MODELO T 212-A.

Size: px
Start display at page:

Download "2.2 T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE MODELO T 212-A."

Transcription

1 VÁVUA BORBOETA REVESTIDA DE MODEO T 212-A Double flanged -ined butterfly valve for shut-off and control services in the chemical Industry. TECHNICA DATA Nominal diameter: Face-to-face: EN 558 Series 20 ISO 5752 Series 20 API 09 Table 1 BS 5155, Tab. Series NF E Flange accommodation: DIN 2501 PN 10/ ANSI B.5, Class 150 MSS SP Class 150 AWWA C 207 AS 2129 Table D and E BS 10 Table D and E JIS B JIS B Flange surface design: DIN 252 Form A-E, ANSI B.5 RF, FF Top flange: EN ISO 5211 NF E Marking: DIN EN 19 Tightness check: DIN 3230 T3 BO (eakage Rate 1) ISO 5208, Category 3 API 598 Table 5 and ANSI B -10, Class VI Temperature range: 0 C to +200 C (depending on operation pressure) Operating pressure: max. 10 bar, ( bar for spec. version) Differential pressure: max. p 10 bar, ( bar for spec. version) Vacuum: up to 1 mbar absolute (with silicon elastomer inserts) from 10 C to +0 C FEATURES - -lined butterfly valve for chemically toxic and highly corrosive media - Environmental protection via EBRO-Safety seal - Splitted body design - Isolation height according to plant prescription - Can be installed in any desired position - Maintenance-free - Can be disassembled, material-specific recycling possible - Material conform to FDA 1 2 GENERA APPICATIONS - Chemically highly corrosive and toxic media - Purification plants - Pharmaceutical Industry - Adhesives, Paper Industry, Fuel Transport - Paint manufacture and processing - Food Industry - Transport of hazardous materials - Wet chloric gas - Conditioning of materials, e.g. galvanizing and pickling - Processing of ore - Fuel transport and storage Safety seal at both shaft ends in accordance with the EBRO Twin Seal principle: 1 Primary sealing by means of a Belleville spring washer, transmitting prestress on the spherical segment area. 2 Secondary sealing of the shaft by means of -Chevron and O-Ring. T 212-A 2.2

2 -INED BUTTERFY VAVE TYP T 212-A F G C A H1 Di B D Z T 212-A with bare shaft end acc. to EN ISO 5211 E Dimensions A B C D Di E F Flange G H1 Z F F F F F

3 ACTUATORS T 212-A WORM GEAR Gear H J V XII VI VII The dimensioning of actuators refers to a control air pressure of bar.,3 10,1,0 30,5 J H EECTRIC ACTUATOR Actuator Type H J M E E The dimensioning of actuators refers to a control air pressure of bar. 25,0 0,0

4 ACTUATORS T 212-A PNEUMATIC DOUBE ACTING Actuator Type H J EB 12-DW EB DA EB 270 DA EB 280 DA ,0 18,0 32,0 2,0 H J The dimensioning of actuators refers to a control air pressure of bar. PNEUMATIC SPRING RETURN Actuator Type H J EB 270 SR EB 280 SR ,0 8,0 J The dimensioning of actuators refers to a control air pressure of bar. SWITCHBOX SERIES MS/NS MS: Switchbox with integrated micro limit switches NS: Switchbox with integrated proximity switches H Other Actuators: See Documentation of the Manufacturer.

5 -INED BUTTERFY VAVE TYP T 212-A MATERIA SPECIFICATION AND PARTS IST /00 > Pt. 1 Description Body Nodular Cast Iron Seat Elastomer insert Silicon EPDM DU-bearing Steel/ coated Trust collar Bellev.spr.washer O-Ring Silicon opt. / -coated opt. Chevron seal 9 Seal Material GGG-0.3 Polytetrafluorethylen Silicon rubber Etylene propylene caoutchouc Flourcarbon caoutchouc X5CrNiMo X12CrNi177 Recommended spare parts Recommended for coated discs * 1 ) Optional: electrically conductive Flourcarbon caoutchouc Polytetrafluorethylen X5CrNi Material-No MVQ EPDM ASTM A395 VMQ EPDM FM 30 Pt Description Plug screw DIN 908 only -00 G-X5CrNiMo Disc/Shaft St. Steel/St. Steel St/PFA-coated St - PFA Screw Set screw Iron Shaft Retainer Iron O-Ring Cover plate Iron Screw Material X2CrNiMo St 52.3 Perfluorlkoxyl A-70 9SMnPb28 St37-2 Other materials upon request. Fluorcarbon caoutchouc St37-2 A-70 Material-No PFA 1.2/ ASTM CF8M F 51 A PFA * 1 B8M SAE12 FM B8M

6 -INED BUTTERFY VAVE T 212-A TORQUE - The torque values specified (MD) are based on dry media and are measured with air at a temperature of 20 C. - The values specified are based on the initial breakaway torque (disc disengages from seat, torque then drops). MD (Nm) Dynamic torque specification available upon request. Regarding the dimensioning of actuators, please contact our engineers. PRESSURE/TEMPERA- TURE DIAGRAM for valves with silicone elastomer inserts Differential Pressure PS (bar) to 00, installation between flanges (W) 50 to, installation between flanges (W) to, end of line service () Temperature TS ( C) Vacuum service to 1 mbar, from 10 C up to 0 C v-vaues - The v -value (m 3 per hour) is the flow of water at a temperature of 5 C to 30 C ( 1 F to 8 F) at p of 1 bar. - The v -values specified are based on tests carried out by the Delfter Hydraulics aboratories, the Netherlands. - Permissible velocity of flow Vmax,5 m/s for liquids and Vmax 70 m/s for gases v-values (Valve fully opened) v -values metal disc v -values -disc The throttle function is linear at an angle 30 to Avoid cavitation! For further values, please contact our engineers. post@ebro-armaturen.com D

2.2 T212 PTFE-LINED BUTTERFLY VALVE TYP T 212 TECHNICAL DATA

2.2 T212 PTFE-LINED BUTTERFLY VALVE TYP T 212 TECHNICAL DATA -INED BUTTERFY VAVE TYP T 212 TECNICA DATA Nominal diameter: Face-to-face: EN 55 Series 20 ISO 5752 Series 20 API 09 Table 1 BS 5155, Tab. Series NF E 29-305.1 Flange accommodation: DIN 2501 PN 10/ ANSI

More information

2.1 T 211-A TECHNICAL DATA

2.1 T 211-A TECHNICAL DATA -INED BUTTERFY VAVE T -A Fully -lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal

More information

1.4 F 012-A VÁLVULA BORBOLETA COM FLANGE DUPLO F012-A.

1.4 F 012-A VÁLVULA BORBOLETA COM FLANGE DUPLO F012-A. VÁVUA BORBOETA COM FANGE DUPO F0-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series 13 ISO 2 Series 13 API 0 Table 2C BS 1 short NF E 2-30.1 Flange accommodation:

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 0 bigger sizes upon request Face-to-face:

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:

More information

1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA

1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA CENTRE FANGED BUTTERFY VAVE M 01-A TECNICA DATA Nominal diameter: 0 00 Face-to-face: EN Series (DIN 2 T 1) ISO 72 Series API 09 Table 1 BS 1 Series 4 Flange accommodation: DIN 1 PN /1 Flange Surface Design:

More information

1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA

1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA TECNICA DATA Nominal diameter: 0 Face-to-face: EN Series (DIN 2 T 1) ISO 72 Series API 09 Table 1 BS 1 Series Flange accommodation: DIN 1 PN /1 ap-joint flange: DIN 21 and DIN 22 Weld-on flange: DIN 27

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:

More information

1.8 Z 011-GMX WAFER TYPE BUTTERFLY VALVE Z 011- GMX.

1.8 Z 011-GMX WAFER TYPE BUTTERFLY VALVE Z 011- GMX. TECNICA DATA Nominal diameter: Face-to-face: EN Series 0 (DIN 0 T 1) ISO 7 Series 0 API 09 Table 1 BS 1 Series NF E 9-0.1 Flange accommodation: DIN 1 PN ANSI B 1., Class 1 Flange Surface Design: DIN, Form

More information

1.3 Z 011-AS WAFER TYPE BUTTERFLY VALVE Z 011-AS TECHNICAL DATA

1.3 Z 011-AS WAFER TYPE BUTTERFLY VALVE Z 011-AS TECHNICAL DATA TECNICA DATA Nominal diameter: 0 300 arger Diameters: See Z0-A with Aluminium Body Face-to-face: EN Series 0 (DIN 30 T3 1) Flange accommodation: DIN 01 PN /10/1 ANSI B 1., Class Flange Surface Design:

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 01_1-5_0-1-e 2.01. 1:01 Uhr Seite 1 DOU NGD UTTRY VV 0-1 DOU NGD UTTRY VV 0-1 TNI DT MTRI SPIITION ND PRTS IST Nominal diameter: 11 1 1 2 ace-to-face: 7 1 15 1 1 TS-Version 1 ody 2 Seal PDM SM VSI / earing

More information

Pneumatic Butterfly Valve Type 3335 / AT

Pneumatic Butterfly Valve Type 3335 / AT Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN

More information

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN

More information

DN25 DN1000 resp. 1" 42"

DN25 DN1000 resp. 1 42 DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

1" 42" SBP Butterfly Valves plastomer-lined PM 51 us /

1 42 SBP Butterfly Valves plastomer-lined PM 51 us / 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available

More information

SCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design

SCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design DN15 DN100 resp. ½" 6" RP (red. port) SCP Cylindrical Plug Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous

More information

SBP Butterfly Valves 1" 42"

SBP Butterfly Valves 1 42 PRODUCT MANUAL PM SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 us SBP Butterfly Valves 1" 42" are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive

More information

The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.

The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully

More information

HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES

HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double

More information

BrewSeal butterfly valves Wafer and lugged

BrewSeal butterfly valves Wafer and lugged Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

SBE Butterfly Valves elastomer-lined PM 52 e / Modular Design

SBE Butterfly Valves elastomer-lined PM 52 e / Modular Design DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design

More information

Technical data Pressure (bar) : 10 Temperature ( C) : Sizes (mm) : Flange accommodation : DIN PN 10/(16)

Technical data Pressure (bar) : 10 Temperature ( C) : Sizes (mm) : Flange accommodation : DIN PN 10/(16) 50 300 mm wafer and lugged lined butterfly valves - Coilspring shaft sealing A PTFE lined solution according ISO 5752/5 short (EN 558-1/T5) with various corrosion resistant disc materials to satisfy demanding

More information

BR 10a Control and Shut-off Butterfly valve

BR 10a Control and Shut-off Butterfly valve M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

Garlock Butterfly Valves Technical Catalog Trusted throughout the chemical, petrochemical & many other industries

Garlock Butterfly Valves Technical Catalog Trusted throughout the chemical, petrochemical & many other industries Technical Catalog Trusted throughout the chemical, petrochemical & many other industries Garlock Butterfly Valves Trusted throughout chemical, petrochemical and many other industries FOR CORROSIVE AND

More information

Keystone Butterfly valve ParaSeal range

Keystone Butterfly valve ParaSeal range The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,

More information

BFV : 14 : 10 : 12 BUTTERFLY VALVE

BFV : 14 : 10 : 12 BUTTERFLY VALVE BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem

More information

DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

DeZURIK BOS-US 2-20 (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions

More information

Keystone Double flanged butterfly valve Figure 55

Keystone Double flanged butterfly valve Figure 55 Double flanged valve design for services in the water treatment industry Features General application Waterwork industries where a double flanged valve is required. Fire fighting systems. Sea water applications.

More information

Concentric butterfly valves

Concentric butterfly valves Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16

More information

Lined Butterfly Valve Pfeiffer Type BR 10a

Lined Butterfly Valve Pfeiffer Type BR 10a Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

Centred disc butterfly valve with elastomer liner. Wafer type body Full -lug type body

Centred disc butterfly valve with elastomer liner. Wafer type body Full -lug type body Type series booklet 0167.1/8-10 KE ELASTOMER Centred disc butterfly valve with elastomer liner Wafer type body Full -lug type body DN 40 to 300 Allowable pressure PS 10 bar Design in accordance with EN

More information

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to

More information

Keystone Butterfly valve ParaSeal range

Keystone Butterfly valve ParaSeal range The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,

More information

AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)

AVK (WWE) BUTTERFLY VALVE DN (3 to 32) 75 (EVML) AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO

More information

AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)

AVK (WWE) BUTTERFLY VALVE DN (2 to 56) 75 (EVS) AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,

More information

KEYSTONE OPTISEAL WAFER AND LUGGED

KEYSTONE OPTISEAL WAFER AND LUGGED A resilient seated butterfly valve for general purpose applications FEATURES GENERAL APPLICATION Food and beverage processing, dry bulk conveying, paper mills, slurry handling etc. Grease or silicone free

More information

KEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.

KEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.

More information

ptfe seated 30 years of high quality experience

ptfe seated 30 years of high quality experience ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation

More information

Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H

Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13

More information

Cylindrical Valves SCP Series

Cylindrical Valves SCP Series SCP: Product Info 22 Cylindrical Valves, plastomer-lined PM 22 M.00 e May 2004 Cylindrical Valves SCP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even

More information

Product Range. Products for all industrial applications

Product Range. Products for all industrial applications Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

Bonded Liner Butterfly Valve Double Flanged Type Series 150

Bonded Liner Butterfly Valve Double Flanged Type Series 150 Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV

More information

AEGIS RSS Series. Fully Lined Bellows Sealed Control Valves. RSS Series

AEGIS RSS Series. Fully Lined Bellows Sealed Control Valves. RSS Series Fully Lined Bellows Sealed Control Valves Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty Paraflon bellows Special designs for chlorine and high-purity media ASSOCIATE CHLORINE

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15

Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15 TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information

AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)

AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS) Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /

More information

KE ELASTOMER. Type Series Booklet

KE ELASTOMER. Type Series Booklet Butterfly Valve KE ELASTOMER Centred-disc Butterfly Valve Elastomer Liner DN 40-300 PS 10 bar Type Series Booklet Legal information/copyright Type Series Booklet KE ELASTOMER All rights reserved. The contents

More information

KEYSTONE SERIES 60 BUTTERFLY VALVE

KEYSTONE SERIES 60 BUTTERFLY VALVE 60W wafer style resilient seated butterfly valve 60L lug style resilient seated butterfly valve Cartridge seat design FATURS GNRAL APPLICATION Ideally suited for many industrial applications such as food

More information

Type 567. Wafer Style Butterfly Valve

Type 567. Wafer Style Butterfly Valve Wafer Style Butterfly Valve Type 5 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 stainless steel Operation:

More information

Wafer, Semi Lug, Lug and Flanged Type

Wafer, Semi Lug, Lug and Flanged Type Year : Wafer, Semi ug, ug and Flanged Type API 607 Fire Safe Page 1 Year : Description Specification : GVC double eccentric High Performance butterfly valves suitable for bi-directional flow and bubble

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT

Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400

More information

Short Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014

Short Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014 Year : Short Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description

More information

BUTTERFLY VALVES PTFE SEATED

BUTTERFLY VALVES PTFE SEATED BUTTERFLY VALVES PTFE SEATED ghibsonvalves.com BUTTERFLY VALVES PTFE SEATED PTFE body seat has a thickness varying from 2,5 to 3 mm depending on the position, even in the shaft area. Discs are available

More information

Ball Valves SBV Series full-port

Ball Valves SBV Series full-port SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even

More information

Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style

Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features General application

More information

Technical Manual. Register 8 CONTENTS - ARV2

Technical Manual. Register 8 CONTENTS - ARV2 Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV2... 4 Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts

More information

DATA SHEET TB 23b. BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version. Applications. Versions

DATA SHEET TB 23b. BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version. Applications. Versions DATA SHEET TB 23b BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version Applications Stainless steel rotary plug valve with high fl ow capacity for technical process plants, especially

More information

Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style

Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance Features General application Since

More information

Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style Sizes DN PN 10/16

Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style Sizes DN PN 10/16 Wafer style Sizes DN -3 PN /1 Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features Patented

More information

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001 Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial

More information

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued) DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque

More information

Butterfly Valves SBP Series

Butterfly Valves SBP Series SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 e May 2004 Butterfly Valves SBP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media

More information

Wafer, Semi Lug, Lug and Flanged Type

Wafer, Semi Lug, Lug and Flanged Type Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

F250D/F251D HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) DOUBLE BLOCK AND BLEED STYLE BUTTERFLY VALVES

F250D/F251D HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) DOUBLE BLOCK AND BLEED STYLE BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VAVES (FORMERY KEYSTONE) F250D/F251D HYGIENIC BUTTERFY VAVES DOUBE BOCK AND BEED STYE BUTTERFY VAVES FOOD & BEVERAGE PROCESS SOUTIONS PROCESS VAVE TECHNOOGY PENTAIR HYGIENIC PROCESS

More information

Centered disc butterfly valves with AMRING elastomer liner. 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631

Centered disc butterfly valves with AMRING elastomer liner. 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631 Type series booklet 8444.1/9 -- 10 ISORIA 10 Centered disc butterfly valves with AMRING elastomer liner 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631 Applications

More information

Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014

Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014 Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description

More information

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve 310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws

More information

Mono Flanged Type Long Face to Face

Mono Flanged Type Long Face to Face Year : Mono Flanged Type Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical

More information

BR 14b / BR 14c Application:

BR 14b / BR 14c Application: High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example

More information

Greater Cairo Foundries. Concentric Rubber Lined Butterfly Valves

Greater Cairo Foundries. Concentric Rubber Lined Butterfly Valves Greater Cairo Foundries مسابك القاهرة الكبرى Concentric Rubber Lined Butterfly Valves GCF Double Flanged Butterfly Valve Series 7100 for Water Works Application GCF butterfly Valve Series 7100 is a ductile

More information

Pumping trust. Worldwide. CRI Valves. The new standard bearer. BUTTERFLY VALVES PRODUCT

Pumping trust. Worldwide. CRI Valves. The new standard bearer. BUTTERFLY VALVES PRODUCT Pumping trust. Worldwide. CRI Valves. The new standard bearer. BUTTERFLY VALVES PRODUCT CATALOGUE PROCESS IN CHEMICAL PHARMACEUTICAL POWER PLANT DISTILLERY PAPER SUGAR DRILLING RIGS WATER TREATMENT PLANTS

More information

KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES

KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES 310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,

More information

Butterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC

Butterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available

More information

BUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31

BUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31 BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:

More information

25mm-500mm (1"- 20") SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company

25mm-500mm (1- 20) SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 25mm-500mm (1"- 20") The High Performance Company SERIES 20 25mm 500mm (1" 20") Bray Controls is proud to offer a high quality

More information

Lug Style Butterfly Valve Type 578

Lug Style Butterfly Valve Type 578 Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:

More information

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off

More information

Butterfly valve Series K

Butterfly valve Series K P R O C E S S T E C H N I K G M B H Centrally mounted butterfly valve PTFE lined Type KG 6 KG 8 K 16 K 18 two-piece body GEFA-MULTITOP Automation system Exchangeable flange for direct installation Unsurpassed

More information

Series 240 Type 3351 Pneumatic On/off Valve

Series 240 Type 3351 Pneumatic On/off Valve Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating

More information

Type / Material code Body* Disc Stem Lining**

Type / Material code Body* Disc Stem Lining** Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

Butterfly valve with ADA pneumatic actuator

Butterfly valve with ADA pneumatic actuator 1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

Keystone Figures 310/312 K-LOK Butterfly Valves

Keystone Figures 310/312 K-LOK Butterfly Valves 310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,

More information

16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option

16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions

More information

High performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.

High performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16. Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,

More information

Butterfly Valve ISORIA 20. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 20 bar. Type Series Booklet

Butterfly Valve ISORIA 20. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 20 bar. Type Series Booklet Butterfly Valve ISORIA 20 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 32-600 PS 20 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 20 All rights reserved. The

More information

Butterfly Valve ISORIA 25. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 25 bar. Type Series Booklet

Butterfly Valve ISORIA 25. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 25 bar. Type Series Booklet Butterfly Valve ISORIA 25 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 32-1000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 25 Original operating manual

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The

More information