TUBING, CASING, DRILL PIPE & ROD SPECIFICATIONS

Transcription

1 TUBING, CASING, DRILL PIPE & ROD SPECIFICATIONS

2

3 USED DRILL PIPE INSPECTION SPECIFICATIONS MATERIAL Nominal Weight Thickness 12.5% NEW PIPE Minimum PREMIUM CLASS Minimum 20% IMPERIAL (in) / (lbs/ft) METRIC (mm) / (kg/m) 30% CLASS 2 Minimum 2 3/ / / / / / Page 1

4 OD GAUGING CHART Nominal Weight Thickness 1/32 Equiv. to % of 3% of in 1/32 4% of in 1/32 IMPERIAL (in) / (lbs/ft) METRIC (mm) / (kg/m) 5% of in 1/32 2 3/ / / / / / Page 2

5 DRILL PIPE & DRILL COLLAR CLASSIFICATIONS STANDARD DRILL PIPE, DRILL COLLAR, HEAVY WEIGHT & SUBS COLOR CODES REMAINING WALL O.D REDUCTION CUTS AND GOUGES (EXCLUDING SHARP BOTTOM TRANSVERSE) MINIMUM WALL THICKNESS MASHES STRETCH SLIP AREA CLASS 1 NEW 87½% One White Band PREMIUM CLASS 80% 80% 3% OF One Punch Marks 2 White Bands PREMIUM CLASS 80% 80% 3% OF Heavy Premium Class Tube One Punch Marks 3 White Bands CLASS 2 70% 70% 4% OF Two Punch Marks (Yellow Band) CLASS 3 ANY IMPERFECTIONS OR DAMAGES WHICH EXCEEDS CLASS II Three Punch Marks (Orange Band) CLASS 4 CRACKED Four Punch Marks (Red Band) 1 Green Ultrasonic End / Slip Area Inspection Performed 1 Blue X95 Grade 2 Blue SS95 Grade 1 Purple G105 Grade 2 Purple SS105 Grade 1 Pink S135 Grade Customer Specification Shall Override These Identification Bands Where Applicable Form No. CC-3 DP Colour Chart Rev. Date: October 2017 Rev. 001 Page 3

6 DRILL PIPE & TOOL JOINT IDENTIFICATION INFORMATION STANDARD DRILL PIPE, DRILL COLLAR, HEAVY WEIGHT & SUBS COLOR CODES 1 White MPI Inspection - No Damage 1 Green Damaged Seal (Field Repairable) 2 Green Damaged Seal / Threads (Shop Repairable) 1 Blue Undersize Tooljoint OD 1 Yellow Incorrect Bevel Diameter 1 Red Cracked or Severe Damage - Do not Use 1 Purple Poor / Undercut Hardband (Place Next To Hardband On Drill Collars) 1 Blue Short Tool Joint / Insufficient Tong Space 1 Orange Requires ID Cleaning (Approx. 3 Ft. from Box End) 2 Orange Plugged ID (Approx. 3 Ft. from Box End) 1 White Bent / Crooked Tube (Approx. 3 Ft. from Box End) SILVER Serial Number Highlighting Customer Specification Shall Override These Identification Bands Where Applicable Form No. CC-3 DP Colour Chart Rev. Date: October 2017 Rev. 001 Page 4

7 DRILL PIPE & TOOL JOINT IDENTIFICATION INFORMATION MARKING Tool joint manufacturer s symbol Month welded (1 to 12) Year welded (last two digits of year) Pipe manufacturer s symbol Drill-pipe grade symbol EXAMPLE ZZ indicates ZZ company (fictional for example only) 3 indicates March 02 indicates 2002 N indicates United States Steel Company a Drill-pipe weight code b a - Drill Pipe Grade Symbols: SYMBOL GRADE SYMBOL GRADE E E75 S S135 X X95 Z Z-140 G G105 V V-150 b - Pipe Manufacturers: Pipe Mills or Processors ACTIVE INACTIVE MILL SYMBOL MILL SYMBOL Algoma X Armco A British Steel - American Seamless AI Seamless Tubes LTD B B&W W Dalmine D CF&I C Kawaski H J&L J Nippon I Lone Star L NKK K Mannesmann M Reynolds Aluminum RA Ohio O Sumitomo S Republic R Siderca SD TI Z Tamsa T Tubemuse TU US Steel N Vallourec V Vallourec & Mannesmann VM Voest VA Used U Wheeling Pittsburgh P Grant Prideco GP Grant TFW TFW Omsco OMS Prideco PI Texas Steel Conversion TSC Page 5

8 DRILL PIPE & TOOL JOINT IDENTIFICATION INFORMATION a) Standard groove and mill-slot locations for E grade standard-weight drill pipe b) Standard groove and mill-slot locations for E grade heavy-weight drill pipe c) Standard groove and mill-slot locations for highstrength standard-weight drill pipe d) Standard groove and mill-slot locations for highstrength heavy-weight drill pipe 3 KEY Mill slot location for pipe grade code 2. Mill slot location for pipe weight code 3. Mill slot location for optional serial number SIZE INCHES NOMINAL WEIGHT LB PER FT WALL THICKNESS INCHES WEIGHT CODE NUMBER SIZE INCHES NOMINAL WEIGHT LB PER FT WALL THICKNESS INCHES WEIGHT CODE NUMBER 2 3/8 2 7/ / / / / / NOTE: Designates standard weight for drill pipe size Page 6

9 STANDARD HEAVY-WEIGHT SPECIFICATIONS (OMSCO) IMPERIAL (in) / (lbs/ft) METRIC (mm) / (kg/m) TUBE TOOL JOINT NOMINAL WEIGHT I.D. NOM. WALL CENTER CONNECTION NEW I.D. BEVEL DIAM. 3 1/ lb/ft 2 1/ /8 2 7/8 SLH90 3 3/4 2 1/8 3 23/ kg/m / lb/ft 2 1/ /8 2 7/8 SLH90 3 3/4 2 1/8 3 23/ kg/m / lb/ft 2 1/ NC /4 2 1/4 4 37/ kg/m /2 IF lb/ft 2 9/ /2 NC /4 2 9/16 5 1/ kg/m FH / lb/ft 2 13/ NC /4 2 13/ / kg/m /2 XH lb/ft /2 NC / / kg/m /2 IF / lb/ft /2 FH 7 1/ / kg/m / lb/ft /8 6 5/8 FH / kg/m NOTE: This table is a guideline only. Contact customer and/or customer spec. for current information including minimum wall thickness and tool joint s STANDARD HEAVY-WEIGHT SPECIFICATIONS (GRANT PRIDECO) TUBE TOOL JOINT IMPERIAL (in) / (lbs/ft) METRIC (mm) / (kg/m) NOMINAL WEIGHT I.D. NOM. WALL CENTER CONNECTION NEW I.D. BEVEL DIAM. 3 1/ lb/ft 2 1/ NC /4 2 5/ / kg/m /2 IF / lb/ft 2 1/ NC /4 2 3/ / kg/m /2 IF lb/ft 2 9/ /2 NC /4 2 5/8 5 1/ kg/m FH / lb/ft 2 3/ NC /4 2 7/8 5 23/ kg/m /2 XH lb/ft /2 NC /8 3 1/16 6 1/ kg/m /2 IF / lb/ft 3 1/ /2 FH 7 1/4 3 5/ / kg/m / lb/ft 4 1/ /4 6 5/8 FH 8 4 1/2 7 45/ kg/m NOTE: This table is a guideline only. Contact customer and/or customer spec. for current information including minimum wall thickness and tool joint s Page 7

10 STANDARD HEAVY-WEIGHT SPECIFICATIONS (DRILCO) TUBE TOOL JOINT IMPERIAL IMPERIAL (in) / (lbs/ft) METRIC METRIC (mm) / (kg/m) NOMINAL WEIGHT I.D. NOM. WALL CENTER CONNECTION NEW I.D. BEVEL DIAM. 3 1/ lb/ft /8 2 7/8 SLH90 3 7/ / kg/m / lb/ft 2 1/ NC /4 2 3/8 4 37/ kg/m /2 IF lb/ft 2 9/ /2 NC /4 2 11/16 5 1/ kg/m FH lb/ft 2 9/ /2 NC /2 4 37/ kg/m /2 IF / lb/ft 2 3/ NC /4 2 7/8 5 23/ kg/m /2 XH lb/ft /2 NC /8 3 1/16 6 1/ kg/m /2 IF / lb/ft 3 3/ /2 FH 7 3 1/2 6 23/ kg/m / lb/ft 4 1/ /8 6 5/8 FH 8 4 1/2 7 45/ kg/m NOTE: This table is a guideline only. Contact customer and/or customer spec. for current information including minimum wall thickness and tool joint s Page 8

11 NEW & USED TUBING INSPECTION SPECIFICATIONS Nominal Weight IMPERIAL (in) IMPERIAL / (lbs/ft) METRIC (mm) METRIC / (kg/m) MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS. Nominal Inside Drift 5% Min % Min. 15% Min. 30% Red. Min. Dia. Dia. Red. Red. Red. Thickness / / / / / Page 9

12 NEW & USED CASING INSPECTION SPECIFICATIONS Nominal Weight IMPERIAL IMPERIAL (in) / (lbs/ft) METRIC METRIC (mm) / (kg/m) MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS. Nominal Thickness Inside Dia. Drift Dia. 5% Red. Min % Red. 4 1/ / / Min. 15% Red. Min. 30% Red. Min Page 10

13 NEW & USED CASING INSPECTION SPECIFICATIONS Nominal Weight IMPERIAL IMPERIAL (in) / (lbs/ft) METRIC METRIC (mm) / (kg/m) MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS. Nominal Inside Drift 5% Min % Min. 15% Min. 30% Min. Dia. Dia. Red. Red. Red. Red. Thickness / / Page 11

14 NEW & USED CASING INSPECTION SPECIFICATIONS Nominal Weight IMPERIAL IMPERIAL (in) / (lbs/ft) METRIC METRIC (mm) / (kg/m) MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS. Nominal Thickness Inside Dia. Drift Dia. 5% Red. Min % Red. 9 5/ / / / Min. 15% Red. Min. 30% Red. Min. Page 12

15 NEW & USED CASING INSPECTION SPECIFICATIONS Nominal Weight IMPERIAL IMPERIAL (in) / (lbs/ft) METRIC METRIC (mm) / (kg/m) MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS. Nominal Thickness Inside Dia. Drift Dia. 5% Red. Min % Red / Min. 15% Red. Min. 30% Red. Min. IMPERIAL (ft) METRIC (Meters) CASING, TUBING & DRILL PIPE LENGTHS Material Range 1 Range 2 Range Casing Tubing Drill Pipe Page 13

16 USED TUBING & CASING SPECIFICATIONS USED TUBING & CASING IDENTIFICATION Class % Reduction - 1 Yellow Class % Reduction - 1 Blue Class % Reduction - 1 Green Class 5 > 50% Reduction or Mashed Tube - 1 Red Bent / Crooked Tube - 1 White Normal Tube Band Requires ID Cleaning - 1 Orange Normal Tube Band Plugged / No Drift - 2 Orange Normal Tube Band ID Coated Pipe - 1 Silver Normal Tube Band Damaged Coupling / Thread - 1 Red Damaged Thread - Insufficient Upset For Threading - 1 Red (behind class band), End & Threads Red Loose Coupling - 1 White Normal Tube Band Coupling with A.P.I. Seal Ring Groove - 1 Blue Beveled Couplings - 1 Purple Special Clearance Couplings - 1 Black J-55 Grade - Green L-80 Grade - Burgundy Customer specification shall override these identification bands where applicable STANDARD CASING WEIGHT IDENTIFICATION CLASSIFICATIONS 4-1/2 5-1/ /8 Weight Paint Weight Paint Weight Paint Weight Paint Bands Bands Bands Bands 11.6 lb/ft None 15.5 lb/ft None 23.0 lb/ft None 32.3 lb/ft None 13.5 lb/ft 1 White 17.0 lb/ft 1 White 26.0 lb/ft 1 White 36.0 lb/ft 1 White 15.1 lb/ft 2 White 20.0 lb/ft 2 White 29.0 lb/ft 2 White 40.0 lb/ft 2 White Other 1 Pink 23.0 lb/ft 3 White 32.0 lb/ft 3 White 47.0 lb/ft 3 White Other 1 Pink Other 1 Pink Other 1 Pink Page 14

17 LINED TUBING SPECIFICATIONS LINED TUBING IDENTIFICATION LINED TUBING IDENTIFICATION New Tubing - ShawPRO TM Lined Tubing (2-White) White Class 2 - ShawPRO TM Lined Tubing (2-Yellow) Class 3 - ShawPRO TM Lined Tubing (2-Blue) Class 4 - ShawPRO TM Lined Tubing (2-Green) Class 5 - ShawPRO TM Lined Tubing (2-Red) New Tubing - ShawPRO HT TM Lined Tubing (3-White) White Class 2 - ShawPRO HT TM Lined Tubing (3-Yellow) Class 3 - ShawPRO HT TM Lined Tubing (3-Blue) Class 4 - ShawPRO HT TM Lined Tubing (3-Green) Joint Requires Liner Removal (Orange on Upsets) STANDARD NEW TUBING / CASING CLASSIFICATIONS New - No Defect - White Band White New - Defect - Red Band Color To Be Designated By Customer For Indicating Weight, size, Grade, Etc. Customer specification shall override these identification bands where applicable Form No. CC-2 Tubing Color Chart Rev. Date: January 2018 Rev. 002 Page 15

18 LINED TUBING SPECIFICATIONS SHAWPRO AND SHAWPRO HT LINER SPECIFICATIONS ShawPRO HDPE Liner Maximum operating temparature 140 F (60 C) Black in color ShawPRO HT PEX Liner Maximum operating temparature 248 F (120 C) Red in color Property Nominal Value Test Method *Application review to be performed for applications above 100 C. SCG, PENT >10,000 hours ASTM F1473 API TORQUE (FT./LBS.) Tubing Diameter 2 3/8 in mm 2 7/8 in mm 3 1/2 in mm 4 1/2 in mm Tubing Strength Min Opt Max J ,290 1,610 L-80 1,320 1,760 2,200 J-55 1,240 1,650 2,060 L-80 1,690 2,250 2,810 J-55 1,710 2,280 2,850 L-80 2,350 3,130 3,910 J-55 2,150 2, L-80 2,960 3,940 4,930 EUE 8RD BARE TUBING DIMENSIONS & ShawPRO LINED TUBING SPECIFICATIONS API STANDARD BARETUBING DIMESIONS Tubing Diameter Weights Thickness Nominal ID Drift Diameter in. mm lb./ft. kg/m in. mm in. mm in. mm 2 3/ / / / Tubing Diameter in. 2 3/8 2 7/8 3 1/2 4 1/2 Weights Inc Liner lb./ft LINED TUBING DINMENSIONS API EUE 8RD COUPLING OD Nominal ID Drift Diameter Regular Slim Hole in. mm in. mm in. mm in. mm Page 16

19 ROCKWELL HARDNESS TEST TABLES Grade IRP or MFG of Special Grade HRC (1) DRILL PIPE E IRP MAX 27 SS-75 IRP MAX 22 X-95 IRP MAX 30 SS-95 IRP MAX 25 G-105 IRP MAX 32 SS-105 IRP MAX27 S DRILL PIPE TOOL JOINTS E,X,G Standard IRP MAX 38 Sour Service (SS) (4) IRP MAX 30 (TSS) (5) IRP MAX 38 HEAVY WEIGHT Tube Smith (Drilco) Tool Joints Smith (Drilco) Tube Grant Prideco Tool Joints Grant Prideco DRILL COLLARS Connection & Body Smith (Drilco) Connection & Body Grant Prideco Tensile Tensile Tensile Tensile Rockwell Strength Rockwell Strength Rockwell Strength Rockwell Strength C B (1,000) C B (1,000) C B (1,000) C B (1,000) (psi) (psi) (psi) (psi) NOTE A: Test is an average of three readings NOTE B: Hardness testing cannot be used to determine or verify grade of material NOTE C: API does not apply any hardness values for drill pipe tubes or tool joints Grade IRP or MFG of Special Grade Expected Range or Maximum Hardness HRB HRC TUBING & CASING H J K C M-65 API MAX 22 (2) L-80 API MAX 23 (2) MN-80 Algoma (3) N-80 API S-80 LSS (3) SM-80L Sumitomo SM-80S Sumitomo (3) RY-85 B&W (3) SM-905 Sumitomo (3) S0090 Algoma (3) AR-95 Armco CYS-95 LSS (3) S-95 LSS (3) SM-95G Sumitomo SM-95L Sumitomo SM-95S Sumitomo (3) SM-95T Sumitomo S0095 Algoma Spec. S-95 LSS (3) P S-105 LSS (3) C-90 API MAX 25.4 (2) T-95 API MAX 25.4 (2) SM-105L Sumitomo P SM-110L Sumitomo S Algoma SM-125G Sumitomo S Algoma SM-150G Sumitomo S Algoma (1) The Rockwell numbers for the range listings are not specified by the manufacturer or by API except as indicated by IRP or footnotes (2) and (3). The range values are given only as a guide for expected hardness of grades listed. (2) API specification (3) Manufacturers specification (4) Manufactured after January 1, 2002 (5) Manufactured before January 1, 2002 Page 17

20 SUCKER ROD SIZES SUCKER ROD SIZES SUCKER ROD WEIGHTS 5/8 (0.625 or 15 mm) 29 lbs. (13.2 kg) 3/4 (0.750 or 19 mm) 42 lbs. (19.0 kg) 7/8 (0.875 or 22 mm) 57 lbs. (25.8 kg) 1 (1.000 or 25 mm) 74 lbs. (33.5 kg) 1 1/8 (1.125 or 28 mm) 94 lbs. (42.2 kg) 1 1/4 (1.250 or 32 mm) 110 lbs. (49.9 kg) COMMON SUCKER ROD SPECIFICATIONS - IMPERIAL MEASUREMENTS API SUCKER ROD MAXIMUM PULL LOAD CHART The table gives the maximum pull load that may be applied to the smallest rod in a sucker rod string. Chart values assure a steady slow pull with no jerk or pull that runs into the load. (For use on stuck pumps - all loads given in kn - kilonewton.) Rod Size Grade C Min Yield Grade K Min. Yield Grade D (Carbon) Min. Yield Grade D (Alloy) Min. Yield inches 60,000 psi 60,000 psi 85,000 psi 105,100 psi 5/8 18,410 18,410 26,075 32,215 3/4 26,510 26,510 37,550 46,390 7/8 36,080 36,080 51,110 63, ,125 47,125 66,755 82, /8 59,645 59,645 84, ,375 Rod Size (Inches) ROD AND COUPLING DIMENSIONS Sucker Rods and Ponies (Inches) Width of Length of Rod Wrench Flat ± 1 / ± 2 Inches 32 Length of Pony Rod ± 2 Inches Nominal Size (Inches) COUPLINGS Outside Diameter or.010 Minimum Tubing 5/8 1 1/2 2 1/16 5/8 7/8 3/4 1 5/8 2 3/8 3/ ,356 20,44 7/8 SH* 1 5/8 2 3/8 7/8 1 68,92 7/8 1 13/16 2 7/ / SH* 2 2 7/8 1 1/8 1 1/ /16 3 1/2 *API SPEC. 11B 1 1/8 2 3/8 3 1/2 *SH - SLIM HOLE Page 18

21 COMMON SUCKER ROD SPECIFICATIONS - IMPERIAL MEASUREMENTS IDENTIFICATION AND MECHANICAL SPECIFICATIONS Manufacturer Type Wrench Flat Marking Yield Strength psi* Tensile Strength psi* API GRADE C Weatherford S-60 S-60 90/ /115 Norris 30 WCN 30 70/80 95/105 Weatherford C11 EVIOT C 60/75 90/115 Upco 35 UPCO 35C 60 min 90/115 API GRADE K Weatherford S-59 S-59 90/ /115 Norris 40 WCN 40 70/80 90/100 Weatherford K65 EVIOT K 60 min 90/100 Upco 45 UPCO K45 60 min 90/115 API GRADE D (Carbon Steel) Weatherford S-67 S / /135 Norris 54 54D 90/ /140 Weatherford D56 EVIOT MD56 85/ /140 Upco 75 UPCO D75 85 min 115/140 API GRADE D (Chrome Moly) Norris 78 WCN 78D 95/ /140 Upco 75 UPCO 75A 85 min 115/140 Weatherford D EVIOT D 85/ /140 API GRADE D (Special Alloy) Weatherford S-87 S /140 Norris 75 WCN 75D 105/ /140 Weatherford KD EVIOT KD63 85 min 115/140 SPECIAL SERVICE Weatherford S-88 S / /155 Norris 97 WCN 97D 110/ /150 Weatherford XD66 TRICO XD min 140/150 Weatherford EL EL Upco 50 UPCO / /160 *Indicates minimum/maximum Page 19

22 COMMON SUCKER ROD SPECIFICATIONS - IMPERIAL MEASUREMENTS SUCKER ROD COLOR CODES Used inspected Rods (marked on box end) New sucker rods vary slightly by manufacturer (marked on pin end) RECOMMENDED MAKE-UP DISPLACEMENT Rod Size Running New Grade D Rerunning Grades C,D,K Inches Minimum Maximum Minimum Maximum 5/8 8/32 9/32 6/32 8/32 3/4 9/32 11/32 7/32 17/64 7/8 11/32 12/32 9/32 23/ /32 16/32 12/32 14/32 1 1/8 18/32 21/32 16/32 19/32 SCRIBED VERTICAL LINE HAND-TIGHT JOINT MEASURED CIRCUMFERENTIAL DISPLACEMENT MADE-UP JOINT MAXIMUM ALLOWABLE ROD TORQUE (N.M.) FOR SCREW PUMPS* Grade 7/8 Rods 1 Rods 1 Rods w/ 7/8 pins 1 1/8 Rods 1 1/4 Rods D Carbon (54) 675 1,010 N/A N/A N/A D (CMA 78) 735 1,100 1,100 1,570 2,000 D (SA 75) 750 1,110 1,100 1,590 2,100 Special Service (97) 800 1,200 N/A 1,700 2,500 *Add a safety factor of 0.8 to maximize rod fatigue life Non-API rods for torsional application SUCKER ROD SHIPPING WTS. Rod Size (Inches) Pounds 5/8 29 3/4 42 7/ /8 94 Page 20

23 COMMON SUCKER ROD SPECIFICATIONS - METRIC MEASUREMENTS SUCKER ROD COLOR CODES Used inspected Rods (marked on box end) New sucker rods vary slightly by manufacturer (marked on pin end) RECOMMENDED MAKE-UP DISPLACEMENT Rod Size Running New Grade D Rerunning Grades C,D,K mm Minimum Maximum Minimum Maximum SCRIBED VERTICAL LINE HAND-TIGHT JOINT MEASURED CIRCUMFERENTIAL DISPLACEMENT MADE-UP JOINT MAXIMUM ALLOWABLE ROD TORQUE (N.M.) FOR SCREW PUMPS* Grade 22 mm Rods 25 mm Rods 25 mm Rods w/ 22 mm pins 28 mm Rods 30 mm Rods D Carbon (54) 915 1,365 N/A N/A N/A D (CMA 78) 995 1,490 1,490 2,215 2,710 D (SA 75) 1,015 1,505 1,505 2,155 2,845 Special Service (97) 1,080 1,625 N/A 2,305 3,390 *add a safety factor of 0.8 to maximize rod fatigue life. non-api rods for torsional application SUCKER ROD SHIPPING WTS. Rod Size(mm) kg Page 21

24 SUCKER ROD SPECIFICATIONS LOADS LANDING DEPTH AND/OR ROD STRING LENGTHS Light < 25,000 psi (172 mpa) Shallow < 4,000 ft. (1,219 m) Medium 25,000-35,000 psi ( mpa) Medium 4,000-7,000 ft. (1,219-2,134 m) Heavy 35,000-42,000 psi ( mpa) Deep 7,000 ft. and deeper (2,134 m) Extra Heavy 42,000 and greater psi (290 mpa) NOTE: This information is not intended as design criteria PHYSICAL PROPERTIES AS NORMALIZED AND TEMPERED 78D ALLOY A4320 ALLOY SPECIAL A4330 HS SPECIAL Tensile - ksi 120/ / /150 Yield - ksi 100 min. 100 min. 115 min. E.I. - 8 % 10 min. 10 min. 10 min. Reduction in Area - % 45 min. 45 min. 45 min. Hardness - Rc 22/30 22/30 30/33 SUCKER ROD SELECTION GUIDE Grade D Alloy - This sucker rod is manufactured from AISI A4142 steel. It is designed primarily for moderate to heavy pumping applications where corrosion is at a minimum or in conjunction with an effective corrosion inhibition program. Alloy Special - This sucker rod is manufactured from AISI A4320 specialized steel and is designed for highly corrosive applications in moderate to heavy pumping applications. It is highly recommended that a corrosion inhibition program be used in conjunction to minimize any detriment to the sucker rod string. High Strength - This sucker rod is manufactured from AISI A4330 steel. It is designed primarily for heavy to extra heavy loads in both reciprocating and progressive cavity pumping applications. As well, this rod can be used in corrosive well fluids where a corrosion inhibition program is present. Note: Shawcor Oilfield Asset Management specializes in sucker rod inspection / reconditioning, rod guide manufacturing and new and reconditioned sucker rod sales. For additional information please contact our Calgary Sales office at (403) or our Nisku plant at (780) Page 22

25 SUCKER ROD COLOR CHART Inspected Sucker Rod Colour Code Chart API Grade C White API Grade K Blue API Grade D (Carbon) Brown API Grade D (Chrome Moly) Yellow API Grade D (Special Alloy) Orange Special Service Green API Class II or Class III Limited Service Rods 2 Yellow All inspections to API Specifications IIB and handled according to API RP-IIBR API ROD WRENCH FLAT MARKINGS Month & year of manufacture API logo MBN D Size of rod Heat code Manufacturer s brand name API grade of rod Form No. CC-1 SR Colour Chart Rev. Date: March 2017 Rev. 000 Page 23

26 SUCKER ROD GUIDES Top View STRAIGHT VANE TAPERED Built to be reliable and long lasting, the straight vane rod guide provides cost effective protection for your valuable artificial lift equipment. Offering superior centralization of rod string, it reduces side load and tubing wear resulting in reduced rod fatigue and peak polish rod load. This translates to decreased workover costs and reduced downtime. HIGH FLOW TWIST The high flow twist rod guide provides increased flow with minimal turbulence due to its wide flow channels. Thanks to its 360 wraparound vanes, the guide provides enhanced paraffin removal and maximum side load distribution along with superior centralization. This combined with its ability to eliminate grooving of production tubing makes the guide useful in highly deviated well bores. EXTENDED STRAIGHT VANE Longer than our straight vane guides, the extended straight vane rod guide offers a larger footprint with remarkably reduced flow resistance. Providing superior wear resistance with the least amount of material down hole, it is suitable for tough wells with high deviation. HURRICANE Similar to the high flow twist guide, the hurricane provides increased flow with minimal turbulence, increased paraffin movement and superior centralization of rod string. Also, the hurricane provides superior wear resistance because of its large surface area. WIDE VANE Custom designed to maximize vane width, the wide vane rod guide has a larger surface area that offers improved downhole wear protection, extending its life. The guide s tapered ends minimize turbulence and allow smooth, unrestricted flow. WEAR PAD For use in drive, hollow or conventional rods, wear pad guides are a cost-effective way to extend production time and reduce downtime. In addition, they are effective in reducing rod string load by allowing movement in the tubing. ACCEPTABLE FOR RECOMMENDED FOR Continuous Use Material Base Polymer Temperature Hot Oiling Sweet Crude Sour Crude Sand Water Brine Application AU PPA 120 C (250 F) AF PPA 200 C (400 F) Ryton PPS 200 C (400 F) FB-1 PPA 200 C (400 F) SIZE AVAILABLE APPLICATIONS Guide Type 2" 2½" 3" Rod Pumping PC Pumping Wells Deviated Well Bores Straight Vane Extended Straight Vane Wide Vane High Flow Twist Hurricane Wear Pad Page 24

27 NOTES Page 25

28 NOTES Page 26

29

30 Oilfield Asset Management Locations SALES - CALGARY, AB (403) Suite 2200, 333 7th Ave SW BROOKS, AB (403) Hwy 1A EDMONTON MACHINE SHOP EDMONTON, AB (780) th Ave ESTEVAN, SK (306) P.O. Box 1185 Highway 47 North FORT ST. JOHN, BC (250) Julia Frontage Mile 54 Alaska Highway GRANDE PRAIRIE, AB (780) Township Road 712 LLOYDMINSTER, AB (780) Reinhart Business Park Block 2 Lot 5 NISKU, AB (NORTH) (780) th Ave Nisku NISKU, AB (SOUTH) (780) th Street Nisku RED DEER, AB (403) Henry Street SHAWCOR CSI NISKU, AB (780) th Street Nisku Shawcor Ltd. is a global energy services company specializing in products and services for the pipeline and pipe services segment of the oil and gas industry and related products for petrochemical and industrial markets. The Company operates through a network of fixed and mobile manufacturing and service facilities located around the world and is valued for its integrity, technology, and proven capability to execute the most complex projects in our industry. JANUARY 2018