ACE TUBING CUTTERS. Pressure Rating (psi) Explosive Weight (g) 2-3/8 CUT , D # - 5.
|
|
- Hubert Ramsey
- 6 years ago
- Views:
Transcription
1
2 Recovery Tools ACE & Extended Range s provide a quick and effective solution to sever tubing in the removal of stuck pipe. These cutters utilize several technological improvements to allow them to cut more reliably with less flare compared to previous tubing cutters. /Drill s provide a quick and effective solution to sever tubing in the removal of stuck pipe. s should be used when tubing becomes stuck in the well. The cutter with the largest possible diameter capable of running in the well should be chosen to achieve maximum performance. (NT) Segmented Casing s provide a quick and effective solutions to sever drill pipe and casing. NT Segmented Casing s should be used when drill pipe and/or casing becomes stuck in the well or during plug and abandonment operations. The cutter with the largest possible diameter capable of running in the well should be chosen to achieve maximum performance. Drill Collar Severing Tools are designed to sever drill collars and heavyweight drill pipe reliably and safely during Recovery Operations. Drill Collar Severing Tools utilize EBWs to simultaneously detonate an explosive column from both ends. The convergence of the detonated explosive columns creates a shock wave collision, severing the tubular. Split Shot was designed for use where traditional jet cutters were not effective or could not be used. The Split Shot is run in a linear configuration adjacent to any collar or connection and positioned by inline magnets. After detonation the collar or connection is split allowing the pipe to be freed for easy removal.
3 When it matters most... Recovery operations are usually an unwanted necessity and can be difficult with unforeseen problems at every turn. The Oilfield "Fisherman" is tasked with trying to recover the pipe quickly and efficiently. Owen Oil Tools provides the product of choice with downhole explosive and auxiliary equipment for Recovery. Owen Oil Tools provides a full range of Recovery devices including the Split Shot, NT-Series Jet s, and Dual-End Severing Tools. The Recovery devices offered by Owen Oil Tools are designed to maximize to performance and minimize damage to tubulars making fishing attempts easier....rely on Owen Recovery Products. ACE TUBING CUTTERS 2-3/8 CUT , D # # 2-7/8 CUT , D # - 8.7# 3-1/2 CUT , D # # EXTENDED RANGE ACE TUBING CUTTERS 2-7/8 CUT , D # - 8.7# 2-3/8 Contact your local Owen Representative for more information 3-1/2 CUT , D # #
4 TUBING CUTTERS 1-1/4 CUT , D # 1-1/4 CUT , D # 1-1/2 CUT , D # 2-1/16 CUT , D # 2-3/8 CUT , D # 2-3/8 Drill CUT , D # 2-3/8 CUT , D # 2-7/8 CUT , D # 2-7/8 CUT , D # 2-7/8 CUT , D # NT TUBING/DRILL PIPE CUTTERS 3-1/2 CUT NT , D # # 3-1/2 CUT NT , D # 4 Drill CUT NT , D # # NT SEGMENTED Casing CUTTERS Recommended Sizes 4-1/2 Drill CUT NT , D 4-1/2 Casing CUT NT , D 4-1/ # to # EUE Drill (Upset 5.0 ) 4-1/ /2 9.5# to 13.5# Casing 5 Casing CUT NT , D # Casing 5-1/2 Casing CUT NT , D 5-1/ # - 23# Casing 5-1/2 Casing CUT NT , D 5-1/ to /2 13# # Casing 6-5/8 & 7 Casing CUT NT , D 6-5/ # - 32# Casing # Casing 6-5/8 & 7 Casing 6-5/8 Drill CUT NT , D 6-5/ # - 24# Casing # - 38# Casing 6-5/ # DP 7-5/8 Casing CUT NT , D 7-5/8 O.D # - 39# Casing
5 SEGMENTED Casing CUTTERS Recommended Sizes 8-5/8-9 Casing CUT , D 8-5/ # - 24# 9-5/8 Casing CUT , D # # 11-3/4 Casing CUT , D 11-3/ # - 42# 13-3/8 Casing CUT , D 13-3/ D. - 77# - 48# SPLITSHOT 18 Assembly 24 Assembly 48 Assembly Temp Tool * (gr/ft) SSC SSC SSC ,700 2, D 5-1/2 to 16 /Casing SSC SSC SSC ,700 2, D 5-1/2 to 16 /Casing SSC SSC SSC ,700 1, D 3-1/8 to 7 /Casing SSC SSC SSC ,700 1, D 3-1/8 to 7 /Casing SSC SSC SSC , D 2-3/8 to 4-1/2 /Casing SSC SSC SSC , D 2-3/8 to 4-1/2 /Casing SSC SSC , D 2-3/8 to 3-1/2 /Casing SSC SSC , D 2-3/8 to 3-1/2 /Casing SSC , D 1.66 to 2-3/8 SSC , D 1.66 to 2-3/8 SSC , D to 2-3/8 SSC , D to 2-3/8 *User needs to refer to the catalog page for specific pressure ratings dependent upon temperatures at depth. SEVERING TOOLS Tool Size Hardware Kit (Part No.) Detonator Number of Detonators Required Pellet Number Number of Pellets Required RECOMMENDED USAGE RANGE 1-3/8 SEV CRT FV 26 20, D 2-7/8 Drill to 4 Drill Collar 1-3/4 SEV SEV /8 SEV CRT GV 44 20, D 3-6 Drill Collar 2 CRT JV 60 20, D 5-10 Drill Collar 2 CRT LV 88 20, D 9-11 Drill Collar For more comprehensive information on any of our products, please contact your local Sales & Marketing Representative
6 ASIA/PACIFIC Adelaide, Australia (61) Jakarta, Indonesia (62) Balikpapan, Indonesia (62) Songkhla, Thailand (66) Kuala Lumpur, Malaysia (60) CANADA Calgary, AB (403) Brooks, AB (403) Edmonton, AB (780) Fort St. John, BC (250) Grande Prairie, AB (780) Lloydminster, AB (780) Medicine Hat, AB (403) Red Deer, AB (403) Whitecourt, AB (780) Estevan, SK (306) CHINA Beijing, China (8610) EUROPE Aberdeen, Scotland 44 (0) MIDDLE EAST Abu Dhabi (971) Muscat, Sultanate of Oman Ruwi, Sultanate of Oman (968) LATIN AMERICA SOUTH Argentina S.A South America Bus. Dev US Contact LATIN AMERICA NORTH Poza Rica, Mexico (52) Reynosa, Mexico (52) Villahermosa, Mexico (52) Houston, Texas (713) USA Bossier City, LA (318) Broussard, LA (337) Casper, WY (307) Corpus Christi, TX (361) Godley, TX (Headquarters) (817) Fruita, CO (970) Greenbrier, AR (501) Houma, LA (985) Houston, TX (713) Laurel, MS (601) Odessa, TX (432) Oklahoma City, OK (405) Parkersburg, WV (304) Punxsutawney, PA (800) Rosharon, TX (281) Snyder, TX (325) Tyler, TX (903) Victoria, TX (361) Wichita Falls, TX (940) Williston, ND (800) From our global network of Owen Oil Tools facilities, we provide perforating gun systems, pipe recovery systems, and auxiliary equipment that can be conveyed into the well bore by any method available, to provide our customers with solutions for their well intervention problems. We do more than simply provide a commodity, rather we provide a Best in product line and then back that product with unrivaled technical support and training where required. We also endeavor to assist our clients with choosing the Owen Oil Tools product that best fits their particular needs. This is a rarity in today s one size fits all marketplace Owen Oil Tools LP. All Rights Reserved. Owen Oil Tools LP. is a subsidiary of Core Laboratories12001 County Road 1000, Godley, TX TEL: OWEN International customers please be sure to add the USA countrycode (+1) when calling to the numbers listed above. is available to most international locations from our USA Headquarters.
Liquid Turbine Flowmeters
MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and
More informationEBFire Guide Book. Contents. Introduction 5-6. Dual Diode Switches 7-8. Plastic vs Aluminum Dual Diodes 9. Plug Shoot Switch Dual Diode Pack 12
EBFire Guide Book EBFire Guide Book Contents Introduction 5-6 Dual Diode Switches 7-8 Plastic vs Aluminum Dual Diodes 9 Plug Shoot Switch 10-11 Dual Diode Pack 12 Pressure Switches 13-15 Feed Thru s 16-18
More informationCoiled Tubing Systems. Stewart & Stevenson
Coiled Tubing Systems Stewart & Stevenson Coiled Tubing Systems Stewart & Stevenson has provided coiled tubing systems to the oilfield service industry since 1989. Renowned for being reliable, rugged,
More informationLiquid Turbine Flowmeters
NuFlo Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and bearing to withstand
More informationMaster Flo Valve Inc.
Actuation Master Flo Valve Inc. Master Flo Valve Inc. is the technological leader and world-class manufacturer of surface and subsea chokes, specialty control valves and supporting actuation. Privately
More informationLiquid Turbine Flow Meters
NuFlo Liquid Turbine Flow Meters NuFlo developed its first flow meter for oilfield applications in 1957. The meter incorporated a tungstencarbide shaft and bearing to withstand the rugged conditions of
More informationPipe Recovery Equipment
Pipe Recovery Equipment Jet Research Center offers a variety of field-proven, reliable pipe recovery equipment to satisfy the high demands in the oilfield industry. The equipment supplied by JRC undergoes
More informationREDEFINING WELL COMPLETION TECHNOLOGIES
REDEFINING WELL COMPLETION TECHNOLOGIES tco.no 2004 The first ISO 14310 V0 certified Tubing Disappearing Plug (TDP-1) is installed for Statoil in the Norne field. The plug design wins the SME Innovation
More informationDownhole Power Systems Drilling further and faster
Downhole Power Systems Drilling further and faster Our products many of them unique are widely recognized for their ingenuity, simplicity and effectiveness in ensuring that customers reach their objectives
More informationUSA: Canada:
TVS-ValveRepair@dnow.com TVS-ValveActuation@dnow.com WHO WE ARE DistributionNOW is focused on being your one-stop solution, and Total Valve Solutions (TVS) is a perfect example of this. From quality OEM
More informationFlowline Products and Services World Proven Chiksan and Weco Equipment.
Flowline Products and Services World Proven hiksan and Weco quipment http://www.fmctechnologies.com Weco Plug Valves premium, hoice of operators, actuators Gear operators, pneumatic actuators and hydraulic
More information2013 Latin America Perforating Symposium. SLAP-23 Perforating Options Available Today in Horizontal Shale Oil and Gas Wells. Kerry Daly, Weatherford
2013 Latin America Perforating Symposium Perforating Options Available Today in Horizontal Shale Oil and Gas Wells Kerry Daly, Weatherford Typical Eagle Ford Well Costs Total well cost approximately $10
More informationE-Series Valve Design High-Temperature Valves to 850 F
1 www.masterflo.com CHOKS AND CONTROL VAL ALVS Master Flo Valve Inc. designs and manufactures choke valves and specialty control valves for both surface and subsea applications to the requirements of ISO
More informationTrucking Catalogue. Industrial Products USA, Ltd.
Industrial Products USA, Ltd. Trucking Catalogue Scan this code to get the latest information on products, services and special offers www.relianceindustrial.com Industrial
More informationAlberta s Third Party Auditor Certification Program. Testing Your Knowledge at the Third Party Auditor Interview Stage
Part One: Alberta s Third Party Auditor Certification Program Testing Your Knowledge at the Third Party Auditor Interview Stage For questions 1 4, circle the correct answer (answers may be found at the
More informationOptimize Your Rod Lift Systems With Pro-Rod Coiled Rod
Optimize Your Lift Systems With Pro- Coiled Three Major Value Points of Pro- Reduce Maintenance Increase Production Enhance Profit Pro- delivers the most convenient and cost-effective coiled rod product
More informationHigh Pressure Type L Packer Type Casing Patches. Manual F635
High Pressure Type L Packer Type Casing Patches Manual F635 Contents Logan High Pressure Type L Packer Type Casing Patches Overview...2 Uses...2 Construction...2 Operation...3 To Engage a Fish...3 Salvaging
More informationSurface Bumper Jar. Manual D440
Surface Bumper Jar Manual D440 Contents Surface Bumper Jar Overview.... 3 Use... 3 Construction... 3 Explanation of Mechanism... 3 Operation... 4 Freeing a Stuck Drill String... 4 Actuating a Surface Bumper
More informationHydraulic Release Overshots. Manual A115
Hydraulic Release Overshots Manual A115 contents Logan Hydraulic Release Overshots Overview...2 Construction...2 Operation...2 Normal Straight Hole Well Application... 2 Directional Well Application...
More informationCORROSION LOGGING BY EMPULSE TECHNOLOGY
STOP GUESSING LISTEN TO YOUR RESERVOIR tgtoil.com CORROSION LOGGING BY EMPULSE TECHNOLOGY Corrosion logging by EmPulse technology Effective long-term management of oil and gas wells is possible only through
More informationFor Region 5 and Region 7 Regional Response Teams Meeting April 22, 2015 St. Charles, Missouri via video/teleconference
For Region 5 and Region 7 Regional Response Teams Meeting St. Charles, Missouri via video/teleconference By Grant Nülle, Upstream Oil & Gas Economist, Exploration and Production Analysis Team U.S. Energy
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More informationRODEC TUBING ROTATOR SOLUTIONS
RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS One Company, Unlimited Solutions Since 1841, National Oilwell Varco has been dedicated to ensuring customers receive the highest quality oilfield
More informationBallistics on Tractor Conveyance. Brian Schwanitz- VP Welltec. MENAPS 2011, Abu Dhabi
Ballistics on Tractor Conveyance Brian Schwanitz- VP Welltec MENAPS 2011, Abu Dhabi Outline Tractor Activity with Ballisticservices Tractor and Ballistic Safe Sub Operation Addressable Switches and Related
More informationLiquid Epoxy Coatings
Liquid Epoxy Coatings The Power Behind Corrosion Prevention Coatings for: Rehabilitation Directional Drilling Girth Weld Protection Bends, Fittings & Odd Shapes Offshore Application Patch & Repair Potable
More informationDoing Business with ConocoPhillips
Doing Business with ConocoPhillips A guide to understanding how to become one of our suppliers in North America Company Profile As of Dec. 31, 2016 17 COUNTRIES WITH OPERATIONS AND ACTIVITIES 13,300 EMPLOYEES
More informationHydraulic Wireline Jar. Manual D460
Hydraulic Wireline Jar Manual D460 Contents Logan Hydraulic Wireline Jar Overview... 2 Uses... 2 Construction... 2 Operation... 2 Tool Illustration... 3 Maintenance... 4 Disassembly... 4 Assembly... 4
More informationFive Star Dealer USA.
Five Star Dealer USA http://dealer.leviton.com The 2016 Five Star Dealer Program Apply Today! USA application deadline: Through December 31st, 2016 at http://dealer.leviton.com The 2016 Five Star Dealer
More informationRENTAL TOOL SERVICES. Megaton Impact Tools
Megaton Impact Tools Megaton Impact Tools optimize your drilling operations. Megaton Impact Tools Ulti-Torq high-torque, double shoulder connections Involute spline design High-strength steel developed
More informationWorld Air Conditioner Demand by Region
World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning Industry Association 1 World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationCERTIFICATION & BUSINESS ENHANCEMENT (CBE)
CERTIFICATION & BUSINESS ENHANCEMENT (CBE) DICKENS MAMBU SGS ADVISORY BOARD MEMBER (SUSTAINABILITY) REGION HEAD OF CERTIFICATION PRESENTATION OUTLINE SGS Background SGS Presence in Sarawak (certification)
More informationUpdate on Tractor Conveyed Ballistics Including API RP-67 Revision
Update on Tractor Conveyed Ballistics Including API RP-67 Revision BRIAN SCHWANITZ WELLTEC MENAPS 3 DECEMBER, 2013 MENA Perforating Symposium Outline: The Downhole Tractor - Briefly Tractors in the Industry
More informationGlobal Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production
More informationFive Star Dealer INTERNATIONAL.
Five Star Dealer INTERNATIONAL http://dealer.leviton.com The 2016 Five Star Dealer Program Apply Today! International application deadline: Through March 31st, 2016 at http://dealer.leviton.com The 2016
More informationFEDERAL RESERVE statistical release
FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90
More informationPRICE LIST Prepared December 16th, 2017 at 6:25am CDT. Prices valid until 1/15/2018 Currency: USD
PRICE LIST Prepared December 16th, 2017 at 6:25am CDT. Prices valid until 1/15/2018 Currency: USD Manufacturing Headquarters 3001 Darrell Road Island Lake, IL 60042 phone: 8475262166 toll free: 8003231659
More informationGLOBAL SUMMARY REPORT Market for High Voltage Insulators & Bushings
GLOBAL SUMMARY REPORT Market for High Voltage Insulators & Bushings 2010-2015 - 2025 GOULDEN REPORTS October 2016 No 1 Priorsfield, Marlborough, Wiltshire, SN84AQ. United Kingdom Tel: +44 1672 513316 Fax:
More informationIssue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
More informationGNB Flooded. Long Duration MCT LEAD CALCIUM NAT LEAD ANTIMONY NCT LEAD CALCIUM HAT LEAD ANTIMONY HCT LEAD CALCIUM
Long Duration MCT LEAD CALCIUM NAT LEAD ANTIMONY NCT LEAD CALCIUM HAT LEAD ANTIMONY HCT LEAD CALCIUM LONG DURATION MCT LEAD CALCIUM CAPACITIES 190 A.H. TO 480 A.H. 8 HOUR RATE TO 1.75 V.P.C. @ 77 F (25
More informationARIEL CORPORATION WORLD STANDARD COMPRESSORS Blackjack Rd Mount Vernon, OH
ARIEL CORPORATION WORLD STANDARD COMPRESSORS 740.397.0311 35 Blackjack Rd Mount Vernon, OH 43050 www.arielcorp.com Ariel Corporation Ariel Support Ariel compressors are designed, manufactured, and packaged
More informationD-VIP. compressors. With several unique features, the D-VIP compressor is one of. the most versatile compressors. available today.
D D-VIP compressors With several unique features, the D-VIP compressor is one of the most versatile compressors available today. Dresser-Rand s D-VIP compressor uses unique design features of both the
More informationUNLOCKING SMARTER ROUTES FOR HEAVY CARGO MAMMOET TERMINAL CRANE (MTC 15)
UNLOCKING SMARTER ROUTES FOR HEAVY CARGO MAMMOET TERMINAL CRANE (MTC 15) MAMMOET TERMINAL CRANE (MTC 15) The Mammoet Terminal Crane, MTC 15, quickly and simply turns any quay into a heavy lifting terminal,
More informationARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS Blackjack Rd Mount Vernon, OH
ARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS 740.397.0311 35 Blackjack Rd Mount Vernon, OH 43050 www.arielcorp.com Moderate-Speed Compressors Ariel API 618 Ariel s moderate-speed API 618
More informationSDI-5 PRODUCT CATALOG
SDI-5 PRODUCT CATALOG 2 This catalog contains all of Cold Jet s SDI-5 product offerings and all part numbers that were current at the time of catalog production. Images shown are for representative purposes
More informationU.S. Rail Crude Oil Traffic
U.S. Rail Crude Oil Traffic Association of American Railroads November 215 Summary U.S. crude oil production has risen sharply in recent years, with much of the increased output moving by rail. In 28,
More informationU.S. Rail Crude Oil Traffic
U.S. Rail Crude Oil Traffic Association of American Railroads May 217 Summary U.S. crude oil production has risen sharply in recent years, with much of the increased output moving by rail. In 28, U.S.
More informationContromatics PA/PAS M5 Pneumatic Actuators
PA/PAS M5 Pneumatic Actuators Continuously Improving Flow Control PA/PAS M5 Pneumatic Actuators Features Available In 15 sizes Dual rack & pinion design 90 & 180 rotation Standard design features double
More informationVAM SLIJ II TM The Semi-Flush connection from a name you trust
Integral connections VAM SLIJ II TM The Semi-Flush connection from a name you trust 2014 - Vallourec Oil and Gas France VAM SLIJ-II TM is a gas tight expanded box premium connection combining maximum external
More informationAccelerated Bridge Construction
Accelerated Bridge Construction Friday September 16 th, 2005 Page 1 Purpose of this Meeting Introduction to Mammoet Some Memorable Projects Highlight our activities per industry: SPMT s and Hydraulic Transporters
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationAUTOMATED VALVE PACKAGES BOOK 4
AUTOMATED VALVE PACKAGES BOOK 4 INDEX AUTOMATED VALVE PACKAGES Automated Valve Packages Introduction 1 DIAPHRAGM ACTUATORS 2 DOUBLE ACTING Series 84, 164 & 420 3 DOUBLE ACTING with Manual Close Mechanism
More informationElectronic Preset Delivery System Smith Meter AccuLoad III. Vapor Recovery. Vapor Recovery System. Overview
Electronic Preset Delivery System Smith Meter AccuLoad III Vapor Recovery Issue/Rev. 0.0 (5/11) Bulletin AB06073 Vapor Recovery System In AccuLoad III.net firmware revision 11.16, a new feature was implemented
More information2013 Migration Patterns traffic flow by state/province
Interstate and Cross-Border 2013 Migration Patterns traffic flow by state/province Based on 77,308 Interstate Household Goods Moves from January 1, 2013 through December 31, 2013 YUKON TERRITORY 0 0 BC
More information1. North America. See for more information
MBR assumes that the production flowchart will allow the company to fully supply itself with couplings, with total coupling capacity estimated at 1,000,000 units per year. The Tenaris Canadian division
More informationT O R Q U E C A T A L O G
TORQUE CATALOG Never a ME-Too Company At TorcUP, our constant pursuit of Being Different maintains the strong link between the company of today and our founding year of 1996. With a steely determination
More information2016 Migration Patterns traffic flow by state/province
Interstate and Cross-Border 2016 Migration Patterns traffic flow by state/province Based on 75,427 Interstate Household Goods Moves from January 1, 2016 through December 15, 2016 NL 8 13 YUKON TERRITORY
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationA Cameron Company. Barton. Flotrac. /Floco. Meters, Samplers & Pulse Transmitters.
A Cameron Company Barton Flotrac /Floco Meters, Samplers & Pulse Transmitters www.c-a-m.com Flotrac /Floco Meters, Samplers & Pulse Transmitters Flotrac Specifications Operating Pressure Operating Temperature
More informationIHC FUNDEX Equipment. Reliable partner for drilling and piling solutions
IHC FUNDEX Equipment Reliable partner for drilling and piling solutions Multifunctional foundation rig IHC FUNDEX Equipment designs, manufactures and delivers multifunctional foundation rigs from Goes
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE 2017 12 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationGREATER VERSATILITY WITH LESS DOWNTIME
GREATER VERSATILITY WITH LESS DOWNTIME PlexPower Distribution Panelboards EASY TO INSTALL, OPERATE AND MAINTAIN. The PlexPower panelboard is engineered to meet your precise requirements today. Easily upgradeable
More informationType A Packer Type Tubing & Casing Patches. Manual F625
Type A Packer Type Tubing & Casing Patches Manual F625 CONTENTS Type A Packer Type Tubing Patches Overview... 2 Use... 2 Construction... 2 Operation... 2 Illustration... 3 Assembly... 4 Maintenance...
More information25198:- 1/31/12 11:24 AM Page 2 Filtration Systems
Filtration Systems Indufil Filtration Systems Global Leadership in Design Expertise and Technical Support From its origins more than 95 years ago, John Crane has become a world leader in the design, development
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationJet Research Center Segmented Explosive Jet Cutters
Jet Research Center Segmented Explosive Jet Cutters Field Loading Procedures WARNING Refer to and apply the procedures listed in the Recommended Practices for Oilfield Explosives Safety; API Recommended
More informationLM6200 MILLING MACHINE
LM6200 MILLING MACHINE 2018 04 LM62 3-Axis Linear and Gantry Milling The CLIMAX LM6200 Linear/Gantry Milling Machine revolutionizes both the capabilities and functionality of portable mills. Four main
More informationDaniel Measurement & Control - Product Training Calendar
2014 Course Calendar: Dates for North America - Houston, TX D4420 Introduction to Daniel Senior Orifice Fittings 1 Day 17 D4120 Introduction to Natural Gas Orifice Flow Measurement 3 Days 23-25 D4320 Advanced
More informationJOB LOSSES BY STATE, State Industry US total AK AL AR AZ CA CO CT Agriculture, forestry, fisheries -15, ,
State US total AK AL AR AZ CA CO CT -15,597-35 -272-248 -232-3,163-132 -46-3,858-68 4-19 -291-303 -116-11 -3,318-9 -55-32 -73-314 -66-35 -554,750-194 -14,113-7,789-4,781-55,255-4,453-6,836-9,326-13 -190-282
More informationAvailable in & International Customer Care: / FAX
Available in 75 90 & 80 International Customer Care: 940-38-22 / FAX 940-483-878 page The Only Universal Plasma! As a replacement (RPT ) torch, the has the ability to work on the majority of plasma power
More informationPumping Unit Powered by Stirling Cycle
Sucker Rod Pumping Workshop Wyndham Hotel, Houston, Texas September 11 14, 2007 Pumping Unit Powered by Stirling Cycle Bryan Dotson, BP America, Houston TX Loren Madden, WhisperGen Limited, Christchurch
More informationBOP SERVICES. All BOPs sold and serviced by Control Technology Inc. are inspected and tested to ensure each meets and exceed industry standards
ABOUT US Control Technology Inc. is a rapidly growing Canadian owned Supplier and Manufacturer of Surface Mounted Well Control Equipment for use in the Domestic and International oilfield market. Control
More informationTools, Mechanical. All or Multiple Products. Parts List. Feeler Gauges. Spiders and Bushings. Feeler Gauge Extension Rod. Cam Setting Bushing
Issue/Rev. 0.1 (9/12) All or Multiple Products Tools, Mechanical Parts List Bulletin PO0A001 Spiders and Bushings Feeler Gauges Locates rotor assembly while obtaining blade tip and block clearances on
More informationReference Number: SMS-4211-L1, Rev 0 Date: May 2, 2018
Reference Number: SMS-4211-L1, Rev 0 Date: May 2, 2018 Manufacturer: Owen Oil Tools 12001 Country Road 1000 Godley, Texas 76044 Subject: Shipping Classification Recommendation for OOT-APRV-066 Fluid Sensitive
More informationLubricated Fishing Bumper Sub. Manual D445
Lubricated Fishing Bumper Sub Manual D445 Contents Lubricated Fishing Bumper Sub Overview... 2 Use... 2 Construction... 2 Operation... 3 Fishing Operations... 3 Drilling Operations... 3 Applying a Downward
More informationSpherical Roller Bearings
Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.
More information41005 Series Heavy Duty - Severe Service. Putting You In Control Series. Maximum Performance Globe Style Control Valves
Putting You In Control 41005 Series Heavy Duty - Severe Service 41005 Series Maximum Performance Globe Style Control Valves Excellent Performance In Severe Service Conditions 2 Dresser Masoneilan EXPERIENCE,
More informationGreen Bus Technology Plan
2018-2040 Green Bus Technology Plan November 2017 Rick Leary, Deputy CEO Bem Case, Head of Vehicle Programs Agenda 1. Evolution of Bus Technology 2. City / TTC Emissions Targets 3. Current Bus Technology
More informationB&R Enclosures AUSRACK PATCH. brenclosures.com.au
B&R Enclosures AUSRACK PATCH brenclosures.com.au Ausrack Patch 19" Lab Rack Matte Black EIA-310-D Compliant IEC 60297 Compliant LOAD 150kg Typically used for network patching applications. A 2-post frame
More informationLand Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2
TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has
More informationSAFETY SERVICE QUALITY VALUE RENTAL EQUIPMENT
SAFETY SERVICE QUALITY VALUE RENTAL EQUIPMENT WHY RENT? Whether you are involved in a refinery FCCU turnaround, rebuilding a coal-fired boiler at a power plant or performing repairs at a shipyard, when
More informationB&R Enclosures. AUSRACK WALL onyx. brenclosures.com.au
B&R Enclosures AUSRACK WALL onyx brenclosures.com.au Ausrack Wall onyx 19 inch wall mount cabinets Matte Black EIA-310-D Compliant LOAD 50kg Suitable for housing networking equipment including patch panels,
More informationWORLDS MOST ADVANCED ANTI-PRY DESIGN 2018 PRODUCT CATALOGUE
WORLDS MOST ADVANCED ANTI-PRY DESIGN 2018 PRODUCT CATALOGUE 2 Lokaway 2018 Product Catalogue Lokaway Swing n Slide, Anti Pry Safes Design Technology. Lokaway Swing n Slide, the world s most revolutionary
More informationForm No. P Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List
Form No. P0541.03 Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List Issue/Rev. 0.3 (3/01) Bulletin P0541.03 SD and ASD Models The Most Trusted Name In Measurement SD or ASD SF or ASF
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationLinear Torque Limiting Clutch
LM Series Features & Options Linear Torque Limiting Clutch Innovation Description & Operation Sankyo's LM Series offers adjustable torque limiting in any linear axis. It mounts directly to linear slide
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationPARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
More informationTHRee divisions. ONe FAMIlY COMPANY > SOLAR DIVISION
THRee divisions. ONe FAMIlY COMPANY > SOLAR DIVISION SOLAR DIVISION. A Global Provider for Solar Energy Solutions In today s world, it is essential to abandon personal needs. Companies must meet the increasing
More informationB&R Enclosures. AUSRACK FLOOR SERVER onyx. brenclosures.com.au
B&R Enclosures AUSRACK FLOOR SERVER onyx brenclosures.com.au Ausrack Floor Server onyx 19 inch light duty server cabinets Matte Black EIA-310-D Compliant SSI Standards Compliant LOAD 1000kg Suitable for
More informationB&R Enclosures AROWANA SERIES LED. brenclosures.com.au
B&R Enclosures AROWANA SERIES LED brenclosures.com.au RAL7040 IP 66 features & benefits More light, less power. Reduce the number of luminaires or add more light. Micro optics reduces direct visual contact
More informationDrive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
More information2011 Third Quarter Update 17 November 2011
2011 Third Quarter Update 17 November 2011 Operations Highlights Group (In HK$ millions) 3Q11 3Q10 2011 2010 Sales 1,334 1,125 +19% 3,983 3,262 +22% Gross profit 767 638 +20% 2,348 1,875 +25% Gross margin
More informationNew Technology Concept. Thru-Tubing Multiple Conduit Super Abrasive Filament Cutter
New Technology Concept Thru-Tubing Multiple Conduit Super Abrasive Filament Cutter This page intentionally left blank 2 www.oilfieldinnovations.com June 2017 Abrasive Strand Filament Cutter for Tubular
More informationMasoneilan* 7700P/7700E Series Pneumatic & Electro-Pneumatic Positioner for Masoneilan* VariPak* Control Valve
GE Oil & Gas Masoneilan* 7700P/7700E Series Pneumatic & Electro-Pneumatic Positioner for Masoneilan* VariPak* Control Valve Parts Supplement Information GE Data Classification: Public THESE INSTRUCTIONS
More informationSmith Meter AccuLoad III AccuLoad III-S and N4 Hardware Worksheet
Electronic Preset Delivery System Smith Meter AccuLoad III AccuLoad III-S and N4 Hardware Worksheet Issue/Rev. 0.2 (9/07) Bulletin AB06050 This worksheet is being provided to ensure that the AccuLoad III-S
More informationTryton. Tool Services. People. Products. Performance. Canadian Locations
Tool Services Canadian Locations Lloydminster - Corporate Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks - Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600
More informationYULCHON, The Center of Dynamic Changes in the 21 st Century, Makes Dream Come True
YULCHON, The Center of Dynamic Changes in the 2 st Century, Makes Dream Come True . Introduction 2. History 3. Organization Chart 4. Summary 5. Manufacturing Process 6. Production Equipment 7. Inspection
More informationPower Generation. Oil & Gas Marine Business & Industrial Drive Systems, Switchgear & Controls Parts & Service
Power Generation Oil & Gas Marine Business & Industrial Drive Systems, Switchgear & Controls Parts & Service Power Generation for Global Markets Innovative Solutions Since 1938 Partnering with world-class
More informationa worldwide leading Paint Company established in 1883 Headquarters in Pittsburgh, Pennsylvania, USA
a worldwide leading Paint Company established in 1883 Headquarters in Pittsburgh, Pennsylvania, USA Daimler AG and PPG Partnership A Partnership that adds value by Transfer of PPG s OE competence to the
More information