Contromatics PA/PAS M5 Pneumatic Actuators

Transcription

1 PA/PAS M5 Pneumatic Actuators Continuously Improving Flow Control

2 PA/PAS M5 Pneumatic Actuators Features Available In 15 sizes Dual rack & pinion design 90 & 180 rotation Standard design features double travel stops that can be adjusted while actuator is pressurized Actuator can easily be converted in the field from double acting to spring return with no additional tools required Fully encapsulated spring design for safety Spring return fail safe to 20,748 in.- lbs. spring end torque Double acting torques to 37,200 in.- lbs. at 80 psig Namur dimensions for the affixing of accessories & transmitting devices 150 psig inlet pressure rated Rated from -55 to 250 F (-48 to 121 C) ISO 5211 mounting dimensions CGA 6.5 certified Factory mutual approved Accessories & Options Extended travel stops Speed controls & mufflers Declutchable manual gear ANI corrosion protection Mounting kits & positioners Limit switches, solenoids, overrides & dribble controls The M5 series rack-andpinion actuator is the most versatile unit available today. All are rated for 150 psig inlet pressure and offer the DLS feature of double limit stops as standard equipment on all models. This feature allows travel adjustments in both directions. The 180 actuators produce the same torque as the standard 90 model. The double acting actuator achieve torques to 37,200 in.- lbs. at 80 psig and the spring return fail safe actuators to 20,748 in.- lbs. spring end torque. Standard actuators are rated -10 F to 195 F and optional high and low temp seals and bearings are available for applications from -55 F to 250 F. Standard construction is extruded aluminum, machined, hard anodized and painted with a one part dry powder epoxy for corrosion protection. Autocatalytic Nickel Infusion construction is also made available as an option. ANI is the latest technological advance in electronic nickel deposition for severe environment corrosion protection. Contents Parts & Materials of Construction... 3 Drive, Mounting & Envelope Dimensional Data Series PAS M5 Torque Chart...6 Series PA M5 Torque Chart, Series PA /PAS M5 Air Consumption & Weights...7 2

3 PA/PAS M5 Pneumatic Actuators Note: Parts in red are included in repair kit. Parts & Materials of Construction No. Qty. Description Material 1 1 Body Anodized Aluminum w/polyester Epoxy Coating 4 2 Piston Die Cast Aluminum 7 1 Pinion ASTM B656 Steel w/enp 8 2 End Cap Epoxy Coated Aluminum 9 12 Epoxy Coated Spring Cartridge Max Steel /Delrin /Brass 11 1 Upper Pinion Bearing Delrin Lower Pinion Bearing Delrin Circlip ASTM B656 Steel w/enp 14 1 Pinion Washer Delrin Piston Skate Delrin Piston Guide Ring Delrin Sealing Nut 304 Stainless Steel 18 1 Travel Stop 304 Stainless Steel 19 2 Travel Stop O-Ring Buna N 20 8 End Cap Screw 304 Stainless Steel 21 2 Piston O-Ring Buna N 22 2 End Cap O-Ring Buna N 23 1 Upper Pinion O-Ring Buna N 24 1 Lower Pinion O-Ring Buna N 25 1 DLS Stop Bolt 304 Stainless Steel 26 1 DLS Stop Bolt O-Ring Viton 27 1 DLS Stop Bolt Bearing Teflon 28 1 DLS Stop Bolt Circlip ASTM B656 Steel w/enp 29 1 Indicator ABS 30 1 Indicator Screw 304 Stainless Steel 3

4 PA/PAS M5 Pneumatic Actuators ØB A Mounting Pattern X Mounting Pattern Y Mounting Pattern Z ISO Mounting Dimensions (in., mm) Size B.C. (in.) B.C. (mm) Thread Depth F #10-32 UNC.43 F #10-32 UNC.43 F /4-20 UNC.35 F /16-18 UNC.47 F /8-16 UNC.59 F /2-13 UNC.71 F /8-11 UNC.94 F /4-10 UNC 1.18 A 1 AA C 1 ØC ØD D 1 ISO Mounting Pattern Mounting Pattern X Y Z 200 F03 F F05 F F05 F F05 F F05 F F07 F F07 F F07 F10 F F10 F F10 F F12 F16** F F F * F16 *37200 includes 4.59 x rectangular pattern. **9000 has 5/8-11 UNC on F16. Drive Dimensions (in., mm) ISO Square 8-Point Drive Dim. (in.) A A1 AA ØB ØC C1 ØD D ISO Square 8-Point Drive Dim. (mm)

5 PA/PAS M5 Pneumatic Actuators Envelope Dimensions (in., mm) Dimension (in.) B H L W BH NH ØPB ØPD PF PH PBH * Dimension (mm) * *Vertical NAMUR solenoid mounting M6 x 10 DP M6.47 [12] Deep NAMUR Std. M5.315 [8] Deep NAMUR Std [32] 1 /8" NPT /4" NPT 1400 & Larger 3.15 [80] PA [130] PA L.157 [4] PF [30].157 [4].945 [24] PBH BH ØPB ØPD H NH PH B W 5

6 PAS M5 Spring Return Actuators Torque Chart (in.-lbs.) Spring Spring 40 psig Air 60 psig Air 80 psig Air 100 psig Air 120 psig Air Qty. Start End End Start End Start End Start End Start End Start ,183 11, ,057 11, , ,924 12,766 14,910 15, ,424 11,686 13,409 14, ,606 11,907 13, ,406 12, , ,635 12,895 16,457 18,718 22,280 24,540 28,103 30, , ,607 13,040 16,430 18,862 22,253 24,685 28, , ,142 15,444 19,965 21,267 25, ,081 11, ,854 12,025 17,677 17,847 23, ,497 13, ,388 14,427 21, ,293 16,819 20,571 24,097 27,850 31,376 35,128 38, , ,310 16,299 21,589 23,577 28,867 30,856 36, ,081 10, ,801 12,026 19,079 19,304 26,358 26,583 33, ,351 12, ,570 15,030 23,848 22,309 31, ,621 15, ,059 10,755 21,338 18,034 28, ,098 14,127 20,721 23,750 30,345 33,374 39,968 42,997 49,592 52, , ,566 16,645 21,189 26,269 30,813 35,892 40,436 45,516 50, ,296 10, ,568 18,628 22,192 28,251 31,816 37,875 41,439 47, ,370 12, ,066 18,114 25,689 27,738 35,313 37,362 44, ,443 15, ,503 14,036 23,127 23,660 32,750 33,283 42, ,517 17, , ,564 19,580 30,187 29,204 39, ,591 20, ,000 15,500 27,624 25,124 37,247 Note: Highlighted torque figures in bold are the recommended actuators for the corresponding available air supply. Torques listed in the above table are exact. When sizing an actuator for a valve, first increase the valve torque required by 20% as a safety factor. 6

7 PA/PAS M5 Pneumatic Actuators PA M5 Double Acting Actuators Torque Chart (in.-lbs.) 40 psig 60 psig 80 psig 100 psig 120 psig ,375 13, ,132 15,165 18, ,833 17,749 23,665 29,581 35, ,790 22,186 29,581 36,976 44, ,625 27,938 37,250 46,540 55,875 Double Acting Torque Curve (Constant Output Torque Throughout Travel In Both Directions) Output Torque PA /PAS M5 Actuators Air Consumption Cubic inches per cycle (open close) PAS Start End Weight (lbs., kg) Weight (lbs., kg) PAS lbs. kg lbs. kg lbs. kg Notes 7

8 CIRCOR Energy is a global manufacturer of highly engineered valve and pipeline products that continuously develops precision technologies to improve our customers ability to control the flow of the world s natural resources, from sub-sea to land, and in severe environments. Continuously Improving Flow Control. Worldwide. United States Canada China Brazil U.A.E. Oklahoma City Calgary 10# Qun Xing San Road 1480, Eugenio Losso District St. P.O. Box: S.E. 89th St. Suite 2604, 308 4th Ave. SW Loufeng District Suzhou Unileste Unit FZS5 AA01 Oklahoma City, OK Calgary, Alberta T2P 0H7 Industry Park Piracicaba - Sao Paulo - Brazil Jebel Ali Free Zone Tel: Tel: China Post Code: Tel: Dubai, UAE. Fax: Fax: Tel: Fax : Tel: sales@circorenergy.com sales.canada@circor.com Fax: sfvalvulas@circor.com.br Fax: Houston Corporate & Sales 945 Bunker Hill, Suite 650 Houston, TX Tel: sales@circorenergy.com Edmonton th Avenue Edmonton, Alberta T6E 5T9 Tel: Fax: sales.canada@circor.com sales.china@circor.com Asia Pacific 10 Woodgrove View Singapore Tel: Fax: Latin America 1500 S.E. 89th St. Oklahoma City, OK Tel: Fax: sales@circorenergy.com sales.dubai@circor.com sales.asia@circor.com CIRCOR Energy. All rights reserved. CONTRO-PAPAS-AUGUST UP-HP reserves the right to change designs, materials, or specifications without notice or without obligation to furnish or install such changes on products previously or subsequently sold. Teflon and Delrin are registered trademarks of DuPont. Viton is a registered trademark of DuPont Dow Elastomers.