STAINLESS STEEL & ALUMINIUM STOCKISTS PRODUCT GUIDE

Transcription

1 STINLESS STEEL & LUMINIUM STOKISTS PROUT GUIE Sheets RHS Flat ar Pipe / Tube ngle Rounds brasives Welding onsumables Fasteners (nut & bolts)

2

3 STINLESS STEEL FLT PROUTS PGE SHEET 4 PERFORTE & MESH 6 PLTE 7 FLOOR PLTE 9 ONTENTS STINLESS STEEL R PROUTS ROUN R 10 FLT R 13 NGLE R 15 HEXGON & HOLLOW R 16 SQURE R 19 HNNEL 20 STINLESS STEEL PIPE PROUTS SEMLESS WELE PIPE 23 UTTWEL PIPE FITTINGS 25 THREE FITTINGS 29 FLNGES 35 STINLESS STEEL TUE PROUTS ROUN TUE 40 RHITETURL TUE 41 SQURE & RETNGULR TUE 42 TUE FITTINGS 43 HYGEINI FITTINGS 47 VLVES & FLNGES 51 SEMLESS TUE 54 OMPRESSION FITTINGS 56 UXILLRY FITTINGS 57 JUST FOOT 58 WHEELS & STORS 60 ZZO STINLESS & LUMINIUM SLES 1

4 ONTENTS LUSTR FITTINGS PGE RIGGING SREWS & TURNUKLES 62 TERMINLS 65 EYE SREWS 67 MISELLNEOUS 68 MRINE & SHE SIL FITTINGS HIN 71 SPRING HOOKS 71 HOOKS 73 LETS 77 PULLEYS & SWIVEL LOKS 78 QUIK LINKS 80 EK HINGES 82 RINGS 83 SHKLES 85 P EYES 91 HINGES 94 LTHES 95 MISELLNEOUS 96 LUMINIUM PROUTS LUMINIUM FLT R 100 LUMINIUM NGLES 101 LUMINIUM HNNEL 103 LUMINIUM TEES & SOLIS 104 LUMINIUM TUE 105 LUMINIUM SQURE OX 106 LUMINIUM FENING & LUSTR 108 LUMINIUM MRINE 112 SIGNGE 113 LUMINIUM SHEET & TRE PLTE ZZO STINLESS & LUMINIUM SLES

5 FSTENERS, RSIVES & TOOLS PGE NHORS 116 MISELLNEOUS FSTENERS 118 ONTENTS RSIVES 119 TOOLS - FILES & RSPS 121 MESURING & UTTING TOOLS 122 HN TOOLS 123 WELING & FINISHING ELETROES 124 MIG WIRES 125 TIG N GS ROS 127 GS EQUIPMENT 129 MNUL R 132 MHINES 134 HELMETS & SFETY 137 WELER S IS 139 ZZO STINLESS & LUMINIUM SLES 3

6 SHEET SPEIFITIONS: STM 240/480 FINISH: 2, 2 PE, N4 PE, PE, N8 PE STINLESS STEEL FLT SIZE M 3R x x x PE N4 PE PE N8 PE 2 2 PE N4 PE LX x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x ZZO STINLESS & LUMINIUM SLES

7 SHEET SPEIFITIONS: STM 240/480 FINISH: 2, 2 PE, N4 PE, PE, N8 PE SIZE M 3R x x x PE N4 PE PE 2 2 PE N4 PE N8 PE LX STINLESS STEEL FLT 1219 x x x x x x x x x x x x x x x x x x x x x 4000 ZZO STINLESS & LUMINIUM SLES 5

8 PERFORTE SHEET STNR SIZE: 2438 x 1219 **Note: ifferent sheet sizes are available upon request ** STINLESS STEEL FLT THIKNESS HOLE I () ENTRES () OPEN RE % SFETY TRE SHEET SIZE RISE HOLE I RIN HOL I x ENTRES WELE and WOVEN MESH GRE: T304 (316 is optional on request) WELE MESH PNELS WELE MESH ROLLS SIZE WIRE I PERTURE WITH WIRE I PERTURE 2400 x x x WELE MESH ROLLS WITH WIRE I PERTURE **Note: Minimum cut to length for welded and woven mesh rolls is one metre. Full size range of woven mesh is available upon request ** ** Minimum length for Woven Mesh is 2 metres ZZO STINLESS & LUMINIUM SLES

9 PLTE SPEIFITIONS: STM 240/480 FINISH: 2PE, No. 1 HRP SIZE TP304/L TP316L TP321 3R12 253M 2205 LX PE No.1 2 PE No x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 7500 STINLESS STEEL FLT ZZO STINLESS & LUMINIUM SLES 7

10 PLTE SPEIFITIONS: STM 240/480 FINISH: PP, No. 1 HRP STINLESS STEEL FLT SIZE TP 304/L TP 316L TP 321 3R12 253M x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x ZZO STINLESS & LUMINIUM SLES

11 FLOOR PLTE / OIL SPEIFITIONS: STM 240/480 FINISH: PRESSE FLOOR PLTE, HRP HEQUER PLTE SIZE TP 304 TP 316 PRESSE FLOOR PLTE x x x x x x 2438 HRP HEQUER PLTE x 2438 STINLESS STEEL FLT x x x x x 3000 HRP HEQUER PLTE OIL ZZO STINLESS & LUMINIUM SLES 9

12 ROUN R SPEIFITIONS: LENGTHS: FINISH: TOLERNE: STM 276 / METRE FIXE & RNOMS OL RWN & POLISHE PEELE & REELE ENTRELESS/PREISION GROUN H8 / H9 / H10 / H11 / K12 SIZE M PPROX. WEIGHT kg/metre STINLESS STEEL R ZZO STINLESS & LUMINIUM SLES

13 ROUN R SPEIFITIONS: LENGTHS: FINISH: TOLERNE: STM 276 / METRE FIXE & RNOMS OL RWN & POLISHE PEELE & REELE ENTRELESS/PREISION GROUN H8 / H9 / H10 / H11 / K12 SIZE M PPROX. WEIGHT kg/metre STINLESS STEEL R ZZO STINLESS & LUMINIUM SLES 11

14 TEHNIL T Stainless steel bar is usually supplied to comply with STM 276 (or STM 582 for free-machining grades). oth specification refer to STM 484M for dimensional tolerances, except as noted below for round bar. vailable tolerances will vary dependent upon bar section size, condition and finish. ROUN R old-finished round bar is usually supplied to STM 276/484 OR 582/484M FINISH RWN PEELE & REELE SMOOTH TURNE GROUN IMETER TOLERNE H9 H9 / H10 H11 / K12 H8 OR H9 STINLESS STEEL R NOMINL R TOLERNE NUMER SIZE () to to to to to to to to to to to to to Tolerance values given in microns = H = all minus J = equal K = all plus 12 ZZO STINLESS & LUMINIUM SLES

15 FLT R SPEIFITIONS: LENGTHS: FINISH: STM 276/484M 4 METRE FIXE & RNOMS SLIT ROLLE EGE (SRE) HOT ROLLE NNELE & PIKLE (HRP) SIZE PPROX. WEIGHT SRE HRP SRE HRP kg/metre 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x STINLESS STEEL R ZZO STINLESS & LUMINIUM SLES 13

16 FLT R SPEIFITIONS: LENGTHS: FINISH: STM 276/484M 4 METRE FIXE & RNOMS SLIT ROLLE EGE (SRE) HOT ROLLE NNELE & PIKLE (HRP) SIZE PPROX. WEIGHT SRE HRP SRE HRP kg/metre 10 x x x STINLESS STEEL R 10 x x x x x x x x x x x x x x x x x x x x x x x x x x x x ZZO STINLESS & LUMINIUM SLES

17 NGLE R SPEIFITIONS: LENGTHS: FINISH: STM 276/484M 6 METRE FIXE & RNOMS HOT ROLLE NNELE & PIKLE SIZE PPROX. WEIGHT kg/metre 3 X 20 X X 25 X X 30 X X 40 X X 50 X X 30 X X 40 X X 25 X X 30 X X 40 X STINLESS STEEL R 5 X 50 X X 25 X X 30 X X 40 X X 50 X X 65 X x 50 x X 75 X x 75 x X 100 X x 75 x X 50 X X 65 X X 75 X X 100 X X 125 X X 150 X x 100 x ZZO STINLESS & LUMINIUM SLES 15

18 HEXGON R SPEIFITIONS: LENGTHS: FINISH: STM 276/582/484M RNOMS OL RWN () HOT ROLLE (HR) & NNELE (HRP) SIZE VG. WEIGHT kg/metre STINLESS STEEL R ZZO STINLESS & LUMINIUM SLES

19 HOLLOW R GRE: SPEIFITIONS: LENGTHS: 316 (FREE MHINING) STM TO 6 METRES TOLERNE: OUTSIE IMETER +2 / -0% INSIE IMETER +0 / -2% SIZE IMENSIONS FTER ROUGH MHINING O.. I.. HUKE TRUE TO O.. HUKE TRUE TO I.. MX O.. MIN I.. MX O.. MIN I.. VERGE WEIGHT kg/metre STINLESS STEEL R ZZO STINLESS & LUMINIUM SLES 17

20 HOLLOW R GRE: SPEIFITIONS: LENGTHS: 316 (FREE MHINING) STM TO 6 METRES TOLERNE: OUTSIE IMETER +2 / -0% INSIE IMETER +0 / -2% STINLESS STEEL R SIZE IMENSIONS FTER ROUGH MHINING O.. I.. HUKE TRUE TO O.. HUKE TRUE TO I.. MX O.. MIN I.. MX O.. MIN I.. VERGE WEIGHT kg/metre 112 v ZZO STINLESS & LUMINIUM SLES

21 SQURE R SPEIFITIONS: LENGTHS: FINISH: STM 276/582/484M RNOMS OL RWN (), HOT ROLLE NNELE & PIKLE (HRP) SIZE VG. WEIGHT kg/metre STINLESS STEEL R TEHNIL T Stainless steel bar is usually supplied to comply with STM 276 (or STM 582 for free-machining grades). oth specification refer to STM 484M for dimensional tolerances. vailable tolerances will vary dependent upon bar section size, condition and finish. FLT R Hot-finished (HRP to STM 276 / 484M) These tolerances are for hot finished flat bars, rolled as bars, in HRP condition. Note that different tolerances apply for flat bar cut from coil, sheet or plate. WITH THIKNESS TOLERNE FOR THIKNESS WITH TOLERNE 3.2 to to to 50 (SRE) UP to 25 +/ / / to 50 +/ / / / to 100 +/ / / to to 150 +/ / / to SQURE & HEXGONL R old-finished to STM 276 / 582 / 484M) NGLE R Hot-finished to STM 276 / 484M) SPEIFIE SIZE SIZE TOLERNE 3.00 to Nil, to Nil, to Nil, to Nil, to Nil, over Nil, LENGTH OF LEG up to 150 over 150 LEG TOLERNE +/ / ZZO STINLESS & LUMINIUM SLES 19

22 HNNEL SPEIFITIONS: LENGTHS: FINISH: STM 276/484M 6 METRES FIXE GRE: 304 / 316 HOT ROLLE, NNELE & PIKLE (HRP) SIZE T x H x 3 x 40 x 20 3 x 50 x 25 STINLESS STEEL R 4 x 60 x 30 4 x 35 x 70 4 x 80 x 40 4 x 90 x 45 4 x 100 x 50 5 x 60 x 30 5 x 70 x 35 5 x 80 x 40 5 x 90 x 45 5 x 100 x 50 5 x 120 x 60 5 x 130 x 65 6 x 60 x 30 6 x 70 x 35 6 x 80 x 40 6 x 90 x 45 6 x 100 x 50 6 x 120 x 60 6 x 130 x 65 6 x 140 x 70 6 x 150 x 75 6 x 160 x 80 6 x 180 x 90 6 x 200 x x 150 x x 200 x ZZO STINLESS & LUMINIUM SLES

23 TEHNIL T HNNEL TOLERNES UNIT WEIGHT KG/MTR SIZE THIKNESS T H x x x x x x x x x x x x x x STINLESS STEEL R 200 x SIZE TOLERNES SIZE THIKNESS T H Tolerance Tolerance ± ±1.5 ± ± ±1.5 ± ± ±1.5 ±0.4 ±0.4 ± ± ±1.5 ±0.4 ±0.4 ± ± ±1.5 ±0.4 ±0.6 ± ± ±1.5 ±0.4 ±0.4 ± ± ±2.0 ±0.6 ±0.6 ±0.6 ±0.4 ±0.4 ±0.4 ± ± ±3.0 ±0.4 ±0.4 ±0.4 ± ± ±3.0 ±0.4 ±0.6 ±0.4 ±0.4 ±0.4 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ± ±3.0 *±0.6 ±0.6 ±0.6 *±0.6 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ZZO STINLESS & LUMINIUM SLES 21

24 TEHNIL T HNNEL TOLERNES UNIT WEIGHT KG/MTR SIZE THIKNESS T H x x x x x x x x STINLESS STEEL R 120 x x x x x x x SIZE TOLERNES SIZE THIKNESS T H Tolerance Tolerance ± ±1.5 ± ± ±1.5 ± ± ±1.5 ±0.4 ±0.4 ± ± ±1.5 ±0.4 ±0.4 ± ± ±1.5 ±0.4 ±0.6 ± ± ±1.5 ±0.4 ±0.4 ± ± ±2.0 ±0.6 ±0.6 ±0.6 ±0.4 ±0.4 ±0.4 ± ± ±3.0 ±0.4 ±0.4 ±0.4 ± ± ±3.0 ±0.4 ±0.6 ±0.4 ±0.4 ±0.4 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ± ±3.0 *±0.6 ±0.6 ±0.6 *±0.6 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ± ±3.0 ±0.6 ±0.6 ±0.6 ±0.6 ± ZZO STINLESS & LUMINIUM SLES

25 SEMLESS & WELE PIPE SPEIFITIONS: LENGTHS: STM 312M METRE/RNOMS FINISH: WELE NNELE & PIKLE SEMLESS OL FINISH/HOT FINISH N PIPE SIZE SIZE WELE SEMLESS PPROX. WGT Inch O.. WT 304/L 316/L /L 316/L 2205 kg/metre SHEULE 10 / 10s 1/ / / / / / / / / SHEULE 40s / ST WLL 1/ / / / / / / / / STINLESS STEEL PIPE ZZO STINLESS & LUMINIUM SLES 23

26 SEMLESS & WELE PIPE SPEIFITIONS: LENGTHS: STM 312M METRE/RNOMS FINISH: WELE NNELE & PIKLE SEMLESS OL FINISH/HOT FINISH STINLESS STEEL PIPE N PIPE SIZE SIZE WELE SEMLESS PPROX. WGT Inch O.. WT 304/L 316/L /L 316/L 2205 kg/metre SHEULE 80s / XS 1/ / / / / / / / / SHEULE 160 1/ / / / / ZZO STINLESS & LUMINIUM SLES

27 UTTWEL PIPE FITTINGS SPEIFITIONS: MTERIL: STM 403 NSI 16.9 WELE / SEMLESS SIZE 90 ELOW 45 ELOW EQUL STU EN PS LONG RIUS SHORT RIUS LONG RIUS TEE TYPE Inch 304L 316L 304L 316L 304L 316L 304L 316L 304L 316L 316L SHEULE 10 1/2 15 3/ / / / / SHEULE 40 1/2 15 3/ / / / / SHEULE / / STINLESS STEEL PIPE ZZO STINLESS & LUMINIUM SLES 25

28 REUING UTTWEL PIPE FITTINGS SPEIFITIONS: MTERIL: STM 403 NSI 16.9 WELE / SEMLESS STINLESS STEEL PIPE SIZE ONENTRI REUER EENTRI REUER REUING TEE SH 10 SH 40 SH 10 SH 40 SH10 SH 40 Inch 304L 316L 304L 316L 316L 316L 316L 316L 3/4 x 1/2 20 x 15 1 x 1/2 25 x 15 1 x 3/4 25 x /4 x 1/2 32 x /4 x 3/4 32 x /4 x 1 32 x /2 x 1/2 40 x /2 x 3/4 40 x /2 x 1 40 x /2 x 1 1/4 40 x 32 2 x 3/4 50 x 20 2 x 1 50 x 25 2 x 1 1/4 50 x 32 2 x 1 1/2 50 x /2 x 1 65 x /2 x 1 1/4 65 x /2 x 1 1/2 65 x /2 x 2 65 x 50 3 x 1 80 x 25 3 x 1 1/4 80 x 32 3 x 1 1/2 80 x 40 3 x 2 80 x 50 3 x 2 1/2 80 x /2 x 1 1/2 90 x /2 x 2 90 x /2 x 2 1/2 90 x /2 x 3 90 x 80 4 x 1 1/2 100 x 40 4 x x 50 4 x 2 1/2 100 x 65 4 x x 80 4 x 3 1/2 100 x 90 5 x x 50 5 x 2 1/2 125 x 65 5 x x 80 5 x 3 1/2 125 x 90 5 x x x x 50 6 x 2 1/2 150 x 65 6 x x 80 6 x 3 1/2 150 x 90 6 x x x x x x 80 8 x 3 1/2 200 x 90 8 x x x x x x x x x x x x x x x x x x x x x x ZZO STINLESS & LUMINIUM SLES

29 TEHNIL T UTTWEL PIPE FITTING IMENSIONS 90 SHORT RIUS ELOW 90 LONG RIUS ELOW 45 ELOW EQUL TEE P NOMINL PIPE SIZE OUTSIE IMETER WLL THIKNESS ELOW SHEULE T L/R S/R L/R EQUL TEE Inch O.. 5S 10S 40S 80S,M E 1/ / / / / / NOMINL PIPE SIZE OUTSIE IMETER STU EN TYPE MSS Inch O.. G F R 1/ / / / / / P STINLESS STEEL PIPE ZZO STINLESS & LUMINIUM SLES 27

30 TEHNIL T UTTWEL PIPE FITTING IMENSIONS REUING TEE ONENTRI REUER EENTRI REUER STINLESS STEEL PIPE NOMINL PIPE SIZE REUING TEE REUERS ONENTRI & EENTRI Inch M H 3/4 x 1/2 20 x x 1/2 25 x x 3/4 25 x /4 x 1/2 32 x x 3/4 32 x x 1 32 x /2 x 1/2 40 x x 3/4 40 x x 1 40 x x 1 1/4 40 x x 3/4 50 x x 1 50 x x 1 1/4 50 x x 1 1/2 50 x /2 x 1 65 x x 1 1/4 65 x x 1 1/2 65 x x 2 65 x x 1 80 x x 1 1/4 80 x x 1 1/2 80 x x 2 80 x x 2 1/2 80 x /2 x 1 1/2 90 x x 2 90 x x 2 1/2 90 x x 3 60 x x 1 1/2 100 x x x x 2 1/2 100 x x x x 3 1/2 100 x x x x 2 1/2 125 x x x x 3 1/2 125 x x x x x x 2 1/2 150 x x x x 3 1/2 150 x x x x x x x x 3 1/2 200 x x x x x x x x x x x x x x x x x x x x x x x ZZO STINLESS & LUMINIUM SLES

31 150L SP THREE FITTINGS SPEIFITIONS: STM GRE: 316 THRE: SP (MLE-TPER, FEMLE PRLLEL) PRESSURE: NOMINL 1000kP WORKING 2000kP TEST Inch SOKET ROUN 1/8 6 1/4 8 3/8 10 1/2 15 3/ / / / NIPPLE HEX RRELL NIPPLE TOE NIPPLE UNION 3 PE ELOW 90 FEM ELOW 90 M/F ELOW 45 F/F TEE FEM HEX P HEX PLUG LOK NUT HOSE TIL Inch HEX REUING USH HEX REUING NIPPLE REUING SOKET 1/4 x 1/8 8 x 6 3/8 x 1/8 10 x 6 3/8 x 1/4 10 x 8 1/2 x 1/8 15 x 6 1/2 x 1/4 15 x 8 1/2 x 3/8 15 x 10 3/4 x x 6 3/4 x 1/4 20 x 8 3/4 x 1/8 20 x 10 3/4 x 1/2 20 x 15 1 x 1/4 25 x 8 1 x 3/8 25 x 10 1 x 1/2 25 x 15 1 x 3/4 25 x /4 x 3/8 32 x /4 x 1/2 32 x /4 x 3/4 32 x /4 x 1 32 x /2 x 1/2 40 x /2 x 3/4 40 x /2 x 1 40 x /2 x 1 1/4 40 x 32 2 x 3/4 50 x 20 2 x 1 50 x 25 2 x 1 1/4 50 x 32 2 x 1 1/2 50 x /2 x 1 1/4 65 x /2 x 2 65 x 50 3 x 2 80 x 50 3 x 2 1/2 80 x 65 4 x x 80 STINLESS STEEL PIPE ZZO STINLESS & LUMINIUM SLES 29

32 150L SP THREE FITTINGS TEHNIL T SOKET HEX NIPPLE RREL NIPPLE TOE NIPPLE UNION 3 PE F/F ELOW 90eg F/F ELOW 90eg M/F ELOW 45eg F/F STINLESS STEEL PIPE TEE F/F HEXGON P HEXGON PLUG LOK NUT HOSE TIL HEX REUING USH HEX REUING NIPPLE REUING SOKET SIZE LENGTH L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 L L 1 FITTING Socket Hexagon Nipple arrel Nipple Toe Nipple Union 3 Pce F/F Elbow 90eg F/F Elbow 90eg M/F Elbow 45eg F/F Tee F/F Hexagon ap Hexagon Plug Lock Nut Hose Tail Hex Reducing ush Hex Reducing Nipple Reducing Socket ZZO STINLESS & LUMINIUM SLES

33 150L SP THREE FITTINGS TEHNIL T RITISH STNR THRES (SP) Taper 1 in 16 on diagram (Shown exaggerated in diagram) Taper H = xp h = xp r = xp NOMINL ORE OF PIPE OUTSIE IMETER OF S.S. PIPE NUMER OF THRES PER INH PITH EPTH OF THRE IMETER T GUGE PLNE (GUGE I.) ISTNE OF GUGE I. (GUGE LENGTH) LENGTH OF USEFUL THRE N Inch h E L 1 L 2 6 1/ / / / / / / / STINLESS STEEL PIPE ZZO STINLESS & LUMINIUM SLES 31

34 3000L FITTINGS SPEIFITIONS: STM 182/NSI 16/11 NPT THRE GRE: 316 PRESSURE: 3000L (IP) Inch 1/8 6 1/4 8 3/8 10 1/2 15 3/ / / FULL OUPLING HLF OUPLING UNION 3 PE 90 ELOW FEMLE 45 ELOW FEMLE TEE FEMLE HEX NIPPLE HEX PLUG STINLESS STEEL PIPE SIZE - NOMINL HEX REUING USH HEX REUING NIPPLE Inch 1/4 x 1/8 8 x 6 3/8 x 1/8 10 x 6 3/8 x 1/4 10 x 8 1/2 x 1/4 15 x 8 1/2 x 3/8 15 x 10 3/4 x 1/2 20 x 15 1 x 1/4 25 x 8 1 x 1/2 25 x 15 1 x 3/4 25 x /4 x 3/4 32 x /4 x 1 32 x /2 x 3/4 40 x /2 x 1 20 x 25 2 x 3/4 50 x 20 2 x 1 50 x 25 2 x 1 1/2 50 x 40 SPEIFITIONS: STM 182/NSI 16/ L SOKETWEL GRE: 316 PRESSURE: 3000L (IP) SHEULE - NOMINL FULL OUPLING HLF OUPLING UNION 3 PE 90 ELOW FEMLE 45 ELOW FEMLE EQUL TEE FEMLE P Inch 1/4 8 3/8 10 1/2 15 3/ / / ZZO STINLESS & LUMINIUM SLES

35 3000L NPT THREE FITTINGS TEHNIL T FULL OUPLING HLF OUPLING HEXGON NIPPLE UNION 3 PE F/F ELOW 90 EG F/F ELOW 45 EG F/F TEE F/F HEXGON PLUG 3000L NPT THREE FITTINGS TEHNIL T HEX REUING USH HEX REUING NIPPLE SIZE LENGTH L L L L L L L L L FITTING Full oupling Half oupling STINLESS STEEL PIPE Hexagon Nipple Union 3 Pce F/F Elbow 90 eg F/F Elbow 45 eg F/F Tee F/F Hexagon Plug Hex Reducing ush Hex Reducing Nipple ZZO STINLESS & LUMINIUM SLES 33

36 TEHNIL T IMENSIONS OF PIPE THRE MERIN STNR THRES (NPT) Straight Pipe Threads: the pitch, angle and depth of thread are the same as the corresponding dimensions of the taper threads NOMINL ORE OF PIPE OUTSIE IMETER OF S.S. PIPE NUMER OF THRES PER INH PITH HN TIGHT EFFETIVE ENGGEMENT EXTERNL THRE LENGTH THRE N Inch n P L 1 E 1 L 2 h 6 1/ / / / / / / / / / / / / EPTH STINLESS STEEL PIPE TEHNIL T SOKET WEL FITTINGS SIZE LENGTH L L L L L L L L L FITTING Full oupling Half oupling Union 3 Pce F/F Elbow 90 eg F/F Elbow 45 eg F/F Tee F/F ap ZZO STINLESS & LUMINIUM SLES

37 FORGE FLNGES SPEIFITIONS: STM 182 NSI 16.5 RISE FE FLNGES TYPE: SLIP ON RFSO WEL NEK RFWN SH10,40 & 80 LIN RF LSS: 150L, 300L, 600L GRE SIZE N.. SLIP ON RISE FE WEL NEK RISE FE LIN RISE FE 150lb 300lb 600lb 150lb 300lb 600lb 150lb 300lb 600lb 304L L STINLESS STEEL PIPE ZZO STINLESS & LUMINIUM SLES 35

38 TEHNIL T FORGE FLNGE IMENSIONS STINLESS STEEL PIPE OLT SIZE OUTSIE I. OF PIPE OUTSIE I. MIN. THIK. MIN. RISE FE THIK. RISE FE I. HU. I HU I. EGIN OF HMFER LENGTH/HU SLIP-ON W.NEK OLT IRLE I. OLT HOLE I. E F G H J K L M 150lb lb # HOLES 36 ZZO STINLESS & LUMINIUM SLES

39 PLTE FLNGES SPEIFITIONS: S2129 TLE FLNGES TYPE: SLIP-ON WEL SOW LIN L LSS: TLE, E, F & H GRE SIZE N.. TLE TLE E TLE F TLE H SLIP-ON LIN SLIP-ON LIN SLIP-ON LIN SLIP-ON LIN 304L L STINLESS STEEL PIPE. ZZO STINLESS & LUMINIUM SLES 37

40 TEHNIL T PLTE FLNGE IMENSIONS TLE STINLESS STEEL PIPE SIZE SLIP ON ORE OUTER I. THIKNESS OLT IRLE I. # OF HOLES I. OF HOLES SOW O TK P TLE E SIZE SLIP ON ORE OUTER I. THIKNESS OLT IRLE I. # OF HOLES I. OF HOLES SOW O TK P ZZO STINLESS & LUMINIUM SLES

41 TEHNIL T PLTE FLNGE IMENSIONS TLE F SIZE SLIP ON ORE OUTER I. THIKNESS OLT IRLE I. # OF HOLES I. OF HOLES SOW O TK P TLE H STINLESS STEEL PIPE SIZE SLIP ON ORE OUTER I. THIKNESS OLT IRLE I. # OF HOLES I. OF HOLES SOW O TK P ZZO STINLESS & LUMINIUM SLES 39

42 WELE ROUN TUE SPEIFITIONS: LENGTHS: STM 554 STM 269 S METRES FINISH: MILL FINISH W POLISHE 320 GRIT P POLISHE MIWY MIRROR M NNELE POLISHE 600 GRIT P FOO POLISHE 320 GRIT F STINLESS STEEL TUE SIZE T304 T316 O WT W P M P F W P M F P ZZO STINLESS & LUMINIUM SLES

43 RHITETURL TUE SPEIFITIONS: LENGTH: STM METRES FINISH: POLISHE MIRROR M POLISHE 400 grit P SLOTTE HN RIL SIZE T304 T316 P M 50.8 x Single Slot 63.5 x Single Slot 76.2 x Single Slot 50.8 x ouble Slot 50.8 x egree Slot OVL / TUE SIZE T304 T316 M M 32 x 63 x x 38 x Oval 26 x 48 x Oval 38 x 62 x Oval 42 x 75 x Oval TRINGULR TUE SIZE T304 T316 M M 37 x 25 x 1.5 STINLESS STEEL TUE RIGI TUE - E N9 PTTERN SIZE T304 T316 P P 31.8 x Reverse Pattern 31.8 x Standard Pattern ZZO STINLESS & LUMINIUM SLES 41

44 WELE SQURE & RETNGLE TUE SPEIFITIONS: LENGTH: STM METRES FINISH: POLISHE 180 HIRLINE SP POLISHE 400 grit 400 SQURE TUE SIZE T304 T316 SP SP x 12.7 x x 12.7 x x 19 x x 19 x x 22.2 x x 22.2 x x 25.4 x x 25.4 x x 31.8 x x 31.8 x x 38.1 x x 38.1 x x 50.8 x x 50.8 x 1.6 SIZE T304 T316 SP SP x 25 x 2 25 x 25 x 3 32 x 32 x 2 32 x 32 x 3 38 x 38 x 2 38 x 38 x 3 50 x 50 x 2 50 x 50 x 3 60 x 60 x 3 80 x 80 x 2 80 x 80 x 3 80 x 80 x x 100 x x 100 x x 150 x x 150 x 3 STINLESS STEEL TUE RETNGLE TUE SIZE T304 T316 SP SP x 25.4 x x 25.4 x x 25.4 x x 40 x 1.6 SIZE T304 T316 SP SP x 10 x 2 50 x 25 x 3 60 x 40 x 3 80 x 40 x x 50 x x 50 x x 50 x x 50 x x 75 x x 100 x x 100 x x 100 x x 100 x 6 42 ZZO STINLESS & LUMINIUM SLES

45 TUE FITTINGS SPEIFITIONS: USTRLIN STNR 1528 PRT ENS LR 1.50 FINISH: ENS UNPOLISHE & POLISHE OTHERS POLISHE SIZE THIK 90 EN 45 EN 180 EN EQUL TEE Y PIEE P ROSS Inch / / / / / / / / STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 43

46 REUING TUE FITTINGS SPEIFITIONS: USTRLIN STNR 1528 PRT FINISH: POLISHE O TK ONENTRI REUER EENTRI REUER REUING TEE Inch 19.1 x /4 x 1/ x x 1/ x x 3/ x x /4 x 3/ x /4 x x /4 x 1/ x /2 x 3/ x /2 x x /2 x 1 1/ x x 1/ x x 3/ x x x x 1 1/ x x 1 1/ x /2 x 3/ x /2 x x /2 x 1 1/ x /2 x 1 1/ x /2 x x x 3/ x x x x 1 1/ x x 1 1/ x x STINLESS STEEL TUE 76.2 x x 2 1/ x x x x 1 1/ x x x x 2 1/ x x x x x x 2 1/ x x x x x x x x x x 2 1/ x x x x x x x x x x x x ZZO STINLESS & LUMINIUM SLES

47 TEHNIL T TUE FITTING IMENSIONS ENTRE-TO-FE IMENSIONS OF 45, 90 &180 TUE ENS NOMINL SIZE ENTRE-TO-FE IMENSIONS WLL / / / / / / / / / / 2 NOTE: = The Straight End Extension ENTRE-TO-FE IMENSIONS OF EQUL TEES NOMINL SIZE ENTRE-TO-FE IMENSIONS IMENSIONS OF WELE TYPE Y PIEE NOMINL SIZE ENTRE-TO-FE IMENSIONS STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 45

48 TEHNIL T TUE FITTING IMENSIONS STINLESS STEEL TUE SIZE TK ONENTRI REUER EENTRI REUER REUING TEE Inch 19.1 X /4 x 1/ X x 1/ X x 3/ X /4 x 3/ X /4 x X /2 x 1/ X /2 x 3/ X /2 x X /2 x 1 1/ X x 1/ X x 3/ X x X x 1 1/ X x 1 1/ X /2 x 3/ X /2 x X /2 x 1 1/ X /2 x 1 1/ X /2 x x x 3/ X x x x 1 1/ X x 1 1/ X x X x 2 1/ X x X x 1 1/ X x X x 2 1/ X x X x X x 2 1/ X x X x X x 1 1/ X x X x 2 1/ X x X x X x X x X x X x ZZO STINLESS & LUMINIUM SLES

49 HYGIENI FITTINGS SPEIFITIONS: SM/RJT Fittings to S1528, Part SM/RJT FITTINGS SIZE ROUN SLOTTE NUT HEX. NUT PLIN LINER MLE PRT O-RING EPM O-RING TEFLON O-RING VITON IP SEL LNK P LNK NUT LUM. SPNNER HYGIENI FLT FE FITTINGS TUE LMPS SIZE HEX. NUT FLT FE LINER MLE PRT LIP REMOVE SEL EPM SEL TEFLON SIZE PLIN OSSE LONGTNG SPEIFITIONS: Triclover Fittings to S1528, Part TRILOVER FITTINGS SIZE LMP OY FERRULE LONG LNK P SEL EPM SEL UN SEL TEFLON SEL VITON STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 47

50 TEHNIL T HYGIENI FITTINGS HEXGONL NUT SIZE x 8TPI WHIT x 8TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT PLIN LINER SIZE E MLE PRT STINLESS STEEL TUE SIZE x 8TPI WHIT x 8TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT 24 O-RING (EPM,TEFLON, VITON) SIZE ZZO STINLESS & LUMINIUM SLES

51 TEHNIL T HYGIENI FITTINGS ROUN SLOTTE NUT SIZE SLOTS x 8TPI WHIT x 8TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT HEXGONL LNK NUT SIZE x 8TPI WHIT x 8TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT x 6TPI WHIT FLT FE LINER SIZE MLE PRT (LIP REMOVE) SIZE x 8T WHIT x 8T WHIT x 6T WHIT x 6T WHIT x 6T WHIT x 6T WHIT STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 49

52 TEHNIL T TRILOVER FITTINGS LMP HEVY UTY SIZE FERRULE LONG SIZE FLNGE SEL SIZE LNK P STINLESS STEEL TUE SIZE STNR SEL SIZE ZZO STINLESS & LUMINIUM SLES

53 VLVES & EQUIPMENT UTTERFLY VLVES LL VLVES PLUG VLVES HEK VLVES SIGHT GLSSES SPRY LLS SMPLING VLVES LEVEL GUGES SHUT OFF & IVERT VLVES FILTERS & STRINERS PRESSURE RELIEF VLVES TNK VENTS STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 51

54 PLTE FLNGES SPEIFITIONS: S2129 TLE FLNGES TYPE: SLIP-ON WEL SOW LIN L LSS: TLE, E, F & H GRE SIZE I. TLE TLE E TLE F TLE H STINLESS STEEL TUE SLIP-ON LIN SLIP-ON LIN SLIP-ON LIN SLIP-ON LIN 304L L ZZO STINLESS & LUMINIUM SLES

55 TEHNIL T PLTE FLNGE IMENSIONS TLE SIZE SLIP ON ORE OUTER I. THIKNESS OLT IRLE I. # OF HOLES I. OF HOLES SOW O TK P TLE E SIZE SLIP ON ORE OUTER I. THIKNESS OLT IRLE I. # OF HOLES I. OF HOLES SOW O TK P STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 53

56 SEMLESS TUE SPEIFITIONS: LENGTHS: FINISH: STM 269 STM 213 (ON REQUEST) FIXE 6 METRES NNELE & PIKLE RIGHT NNELE STINLESS STEEL TUE SIZE TP304 TP316 O WT ZZO STINLESS & LUMINIUM SLES

57 SEMLESS/WELE TUE TEHNIL T PPROXIMTE MSS & THEORETIL URSTING PRESSURE FOR SEMLESS & WELE TUE (WELE REFER NOTES) WT SWG O Inch / / / / / / / / / / / / / / / Figures shown in bold are the Theoretical Weight of the tube, calculated using the nominal outside diameter and wall thickness as in the formula: w = (d-t)t. Where W = Weight (kg/m), = d = Specified O (millimetres) t = Specified WT (millimetres) 2 Figures shown in italics are the Theoretical ursting Pressure of Grade 316, 304 and 321 seamless tube, calculated using arlow s thin wall formula and where S = 515 MPa: P = 2st Where: P = Theoretical ursting Pressure (MPa) S = Tensile Strength (MPa) t = Wall thickness (millimetres) = Outside diameter (millimetres) For Theoretical ursting Pressure of Grades 316, 304 and 321 welded tube, multiply the figures shown in the table by 0.85 (Weld Joint Efficiency). For Theoretical ursting Pressure of Grades 316L and 304L seamless tube S = 485 MPa, multiply the figure shown in the table by For Theoretical ursting Pressure of Grades 316L and 304L welded tube, multiply the figures shown in the table by (S = 485 MPa x 0.85 Weld Joint Efficiency). This Table is a guide only and should not be used to determine availability of products. STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 55

58 OMPRESSION FITTINGS TUE TO TUE UNION TUE TO SE/MS O-RING UNION U REUING UNION UR UNION ELO WL SE/M S MLE ONNE TOR S SE/M S MLE ELO WSL SE/M S 45ºMLE ELO WSL UNION TEE T UNION ROSS X ULKHE UNION U TUE TO MLE PIPE SE/M S MLE RUN TEE SRT SE/M S MLE RNH TEE ST O-SEL STRIGHT THRE ONNETOR OS MLE ONNE TOR M TER MOOUPLE ONNE TOR MT MLE ONNE TOR FOR ONE WSHER SEL GM-G O-SEL PIPE THRE ONNETOR OP TUE TO WEL EN MLE ONNE TOR FOR METL GSKET SEL OM ULKHE MLE ONNE TOR M MLE ELO W LM MLE PIPEP WEL ONNE TOR W MLE PIPE WEL ELOWLW TUE SOKET WEL ONNE TOR SW 45ºMLE ELO WLM MLE RUN TEE RTM MLE RNH TEE TM TUE TO FEMLE PIPE TUE SOKET WEL ELOWLSW PLUG & P FEM LE ONNE TOR F G UGE ONNETOR G ULKHE FE MLE ONNE TOR F PLUG P P FEM LE ELOWLF FEM LE RUN TEE RTF FEM LERNH TEE TF TUE TO TUE UNION STINLESS STEEL TUE STU TUE ONNETOR REUER R ULKHE REUER R MLE PTER M FEM LEPTOR F PORT ONNE TOR P REUING PORT ONNETOR PR TUE INSERT I SURE RING L G PG UGE IG NUT N FERRULE SET FS FRONT FERRULE FF PRESWGING TOOL EZY-MT K FERRULE F FLNGE LPPE P TUE ONNE TOR FT TUE TO N TUE N UNION FU N ULKHE UNION UR N PTER F 56 ZZO STINLESS & LUMINIUM SLES

59 UXILIRY TUE FITTINGS JUSTLE FEET & INSERTS (M16 THRE) STINLESS STEEL JUSTLE FOOT STINLESS STEEL ONELE FLNGES SE SIZE SQURE TUE NYLON INSERTS SE SIZE STINLESS STEEL TUE SLES SIZE 304 1/4 3/8 1/2 3/ /4 1 1/2 2 TUE SIZE /2 3/ /4 1 1/ /2 3 4 T316 SOLI PUSH-IN PS TO SUIT O SIE VIEW TOP VIEW FE RINGS NGLE NEK RINGS FLT FE RINGS INSIE IMETER MTERIL Thick Thick Thick Thick GRE 316 EXPNSION FLNGES SIZE 304 3/ /4 WLL, EILING OR FLOOR INSIE IMETER INNER FLNGE 38.1 PRESSE 50.8 PRESSE 63.5 PRESSE x 20 x x 20 x x 25 x x 25 x x 25 x x 30 x x 30 x x 40 x x 40 x x 40 x x 40 x 5 MTERIL GRE 316 SILIONE SELNT ETWEEN EXPNSION FLNGE & WLL SREW FIXING HOLES OUTER FLNGE O RING STINLESS STEEL TUE 1 1/2 2 O TUE 2 1/ INNER FLNGE O RING OUTER FLNGE SREW FIXING HOLES ZZO STINLESS & LUMINIUM SLES 57

60 JUSTLE FEET & INSERTS H = HEVY UTY 121 SERIES (STINLESS STEEL) OMPLETE WITH NTI SLIP PS SIZE E RTING 40xM M8 500kg 40xM M10 700kg 60xM M kg 60xM12x M kg 60xM M kg 60xM16x M kg 60xM M kg 60xM20x M kg 60xM M kg 60xM24x M kg 90xM M kg 90xM12x M kg 90xM M kg 90xM16x M kg 90xM M kg 90xM20x M kg 90xM M kg 90xM24x M kg 125xM M kg 125xM M kg 125xM16x M kg 125xM M kg 125xM20x M kg 125xM M kg 125xM24x M kg H STNR 221 SERIES E F G SE SE HEIGHT OVERLL HEIGHT STU THRE LENGTH PIVOT NGLE RTING M deg 2000kg M deg 2000kg M deg 3000kg M deg 3000kg M deg 4000kg M deg 4000kg STINLESS STEEL TUE LL JOINTE (STINLESS STEEL) 21 SERIES SIZE E RTING 40xM M8 350kg 40xM M10 500kg 60xM M12 800kg 60xM M kg 90xM M12 800kg 90xM M kg 60xM M kg 90xM M kg 60xM M kg 60xM M kg 90xM M kg 90xM M kg valiable in other stud lengths () as required (STINLESS STEEL) 41 SERIES SIZE E RTING 40xM M8 350kg 40xM M10 500kg 60xM M12 800kg 58 ZZO STINLESS & LUMINIUM SLES

61 JUSTLE FEET & INSERTS OLT OWN (STINLESS STEEL) 31 SERIES SIZE E RTING 40xM M8 350kg 40xM M10 500kg 60xM M12 800kg 60xM M kg 60xM M kg 60xM M kg 60xM M kg 90xM M12 800kg 90xM M kg 90xM M kg 90xM M kg 90xM M kg valiable in other stud lengths () as required * enotes also avaliable with single hole flange SQURE THREE TUE EN (STINLESS STEEL) 11 SERIES (G) IS REOMMENE I TUE SIZE SIZE E F G RTING 19xM8 19 M kg 25xM8 25 M kg 25xM10 25 M kg 25xM12 25 M kg 25xM16 25 M kg 30xM8 30 M kg 30xM10 30 M kg 30xM12 30 M kg 30xM16 30 M kg 32xM8 32 M kg 32xM10 32 M kg 32xM12 32 M kg 32xM16 32 M kg 35xM8 35 M kg 35xM10 35 M kg 35xM12 35 M kg 35xM16 35 M kg 38xM8 38 M kg 38xM10 38 M kg 38xM12 38 M kg 38xM16 38 M kg 40xM10 40 M kg 40xM12 40 M kg 40xM16 40 M kg 51xM10 51 M kg 51xM12 51 M kg 51xM16 51 M kg 51xM20 51 M kg ROUN THREE TUE EN (STINLESS STEEL) 81 SERIES SIZE E F G RTING 25xM8 25 M kg 25xM10 25 M kg 25xM12 25 M kg 32xM10 32 M kg 32xM12 32 M kg 32xM16 32 M kg 38xM10 38 M kg 38xM12 38 M kg 38xM16 38 M kg 40xM8 40 M kg 40xM10 40 M kg 40xM12 40 M kg 40xM16 40 M kg 51xM12 51 M kg 51xM16 51 M kg 62xM16 62 M kg STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 59

62 WHEELS & STORS STINLESS STEEL TUE 60 ZZO STINLESS & LUMINIUM SLES

63 WHEELS & STORS STINLESS STEEL TUE ZZO STINLESS & LUMINIUM SLES 61

64 RIGGING SREW/ PIPE TURNUKLE (JW N SWGE TERMINL) ф ф1 ф2 ROPE L MINI RIGGING SREW/ PIPE TURNUKLE (JW N SWGE TERMINL), E F M ROPE M M M M RIGGING SREW (SWGE N SWGE) E F ROPE M RIGGING SREW/ PIPE TURNUKLE (SWIVEL TOGGLE N JW) ф L M M M M RIGGING SREW/ PIPE TURNUKLE (WIE N WIE TOGGLE), ф L M M M M LUSTR FITTINGS RIGGING SREW/ PIPE TURNUKLE (SWIVEL TOGGLE N SWGE TERM) L ROPE M M M M ZZO STINLESS & LUMINIUM SLES

65 RIGGING SREW/ PIPE TURNUKLE (JW N JW) ф L M M M M M M M M M RIGGING SREW/ PIPE TURNUKLE (EYE N EYE) E F M L M M M M M M M M RIGGING SREW (LG N SWGE) G H E F G H WIRE M TURNUKLE, FRME TYPE (HOOK N HOOK) L M M M M M M M M M RIGGING SREW/ PIPE TURNUKLE (HOOK N EYE) L M M M M M M M LUSTR FITTINGS ZZO STINLESS & LUMINIUM SLES 63

66 TURNUKLE, FRME TYPE (EYE N EYE) L M M M M M M M M M TURNUKLE, FRME TYPE (HOOK N EYE) E L M M M M M M M M M TURNUKLE, FRME TYPE (JW N JW) L M M M M M M M M TOGGLE TERMINL WITH NUT ф M M12 SWGE TOGGLE LUSTR FITTINGS E L ZZO STINLESS & LUMINIUM SLES

67 STU TERMINL *Supplied with 8 /F nuts ф M M5(LEFT) M M6(LEFT) M M M5(LEFT) M M6(LEFT) M M6(LEFT) M M M M M M M M M M M30 STU TERMINL (ONE SIE INTER THRE) E F G M M M M5 RO TERMINL (OME) E F OUNTER-SUNK RO TERMINL TOGGLE TERMINL SS304 OR SS316 E F L ROPE LUSTR FITTINGS ZZO STINLESS & LUMINIUM SLES 65

68 FORK TERMINL FORGE ф 1 3 ф 2 ф 3 L ROPE EYE OLT/ SREW E F M M M6 OULE THRE LG SREW M M M M M M M M10 EYE TERMINL FORGE ф 1 ф 2 L LUSTR FITTINGS LG SREW/SWGE TERMINL LEFT OR RIGHT THRE * Thread, right/left ф L L1 L2 K H T* ROPE 5* R * R * R * R * R * L * L * R * L ZZO STINLESS & LUMINIUM SLES

69 EYE LG SREW ф LG EYE SREW ф LG EYE SREW FORGE ф L ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ LIFTING EYE OLT WITH WSHER N NUT RING NIL L M M M M M M M M M M E F G H LUSTR FITTINGS ZZO STINLESS & LUMINIUM SLES 67

70 EYE OLT WITH OULE WSHERS N NUT FORGE EYE OLT WITH WSHER & NUT L M M M M M M M M M M M M M M M M M E F M6 WIRE ROPE LIP E E M M M M M M M M M M M M M WIRE ROPE LIP (LIGHT TYPE) E E M M M M M M M M M M M LUSTR FITTINGS SLE/ EYE STRP ф SLE/ FLT EYE STRP (TWO HOLE TYPE) ф ZZO STINLESS & LUMINIUM SLES

71 I THIMLE E WIRE THIMLE ST WITH LOSE EN WIRE THIMLE SHEET ST WITH LOSE EN E WIRE ROPE THIMLE LE PIVOT ф HEX SOKET TENSIONER M OUNTER SUNK HEX SOKET TIMER INSERT SS316 H I M M M6 THRE M RIGHT M LEFT LUSTR FITTINGS ZZO STINLESS & LUMINIUM SLES 69

72 STINLESS STEEL WIRE SS316 SOL IN REELS ONLY Suitable for marine and premium industrial applications Manufactured in Korea from high quality POSO stainless steel rods STINLESS STEEL WIRE SS316 SOL IN REELS ONLY Economical industrial applications Grade 304 is available upon request only Highly polished finish Size M/Reel reaking Strength (min) Kgs M1.6 (1x19) M2.0 (1x19) M2.5 (1x19) M3.2 (1x19) M3.2 (1x19) M4.0 (1x19) M5.0 (1x19) M6.0 (1x19) M2.0 (7x19) M2.5 (7x19) M3.2 (7x19) M4.0 (7x19) M5.0 (7x19) M6.0 (7x19) M10.0 (7x19) M1.6 (7x7) M2.0 (7x7) M2.5 (7x7) M3.2 (7x7) M3.2 (7x7) M4.0 (7x7) M5.0 (7x7) M6.0 (7x7) Size M/Reel reaking Strength (min) Kgs M1.6 (1x19) M1.6 (1x19) M2.0 (1x19) M2.5 (1x19) M3.2 (1x19) M4.0 (1x19) M5.0 (1x19) M6.0 (1x19) M8.0 (1x19) M10.0 (1x19) M2.0 (7x19) M2.5 (7x19) M3.2 (7x19) M4.0 (7x19) M5.0 (7x19) M6.0 (7x19) M8.0 (7x19) M10.0 (7x19) M1.6 (7x7) M2.0 (7x7) M2.5 (7x7) M3.2 (7x7) M4.0 (7x7) M5.0 (7x7) M6.0 (7x7) M8.0 (7x7) M10.0 (7x7) NIKEL PLTE HN OPPER SWGE WIRE SIZE WIRE SIZE inch /16" /64" /32" /8" /32" /16" /4" LUSTR FITTINGS RETINING LIP FOR FORK TERMINLS SS316 TERMINL/SREW SIZE M5 M6 NYLON GROMMETS (SPLIT TYPE) SUIT WIRE ROPE OLOUR LEVIS PIN FOR FORK TERMINLS SS316 TERMINL/SREW SIZE POST RILL SIZE inch LK 11/32" GREY 11/32" M5 M6 70 ZZO STINLESS & LUMINIUM SLES

73 .SHORT LINK HIN (IN 766) P * M2 IS IN 763.MEIUM LINK HIN Wgt. KG/M reaking Strain Kg Kg Kg Kg Kg Kg Kg P Wgt. KG/M reaking Strain Kg Kg Kg Kg Kg Kg Kg Kg MRINE & SHE SIL SPRING HOOK ф L SPRING HOOK ST ф SPRING HOOK ф L ZZO STINLESS & LUMINIUM SLES 71

74 MRINE & SHE SIL SPRING HOOK ф SPRING HOOK WITH EYE L SPRING HOOK WITH LOKING NUT SPRING HOOK WITH LOKING NUT N EYE ф L LOK SPRING HOOK SFETY LTH LOK SPRING HOOK WITH EYE SFETY LTH ф L ZZO STINLESS & LUMINIUM SLES

75 SNP S-HOOK ф MRINE & SHE SIL S-HOOK (OPEN EN N NRROW EN) ф S-HOOK ф 1 2 R1 R SPRING FENER HOOK E F FENER EYE FENER HOOK ф ZZO STINLESS & LUMINIUM SLES 73

76 MRINE & SHE SIL EK HOOK (TYPE-EL) EK HOOK (TYPE-33) E EK HOOK (TYPE-40) E EK HOOK (TYPE-43) EK HOOK (TYPE-45) EK HOOK (TYPE-46) EK HOOK (TYPE-47) ф EK HOOK (TYPE-60) ф EK HOOK (TYPE-G) EK HOOK (TYPE-H) ф EK HOOK (TYPE-63) ф ZZO STINLESS & LUMINIUM SLES

77 EK HOOK (TYPE-G) EK HOOK (TYPE-H) MRINE & SHE SIL EK HOOK (TYPE-63) ROPE SHEET SNP SHKLE PELIN HOOK (WITH LINK) SIZE inch L PELIN HOOK L M M M M SPRING SNP ST, EYE EN L SPRING SNP-ST (HOOK EN) L ZZO STINLESS & LUMINIUM SLES 75

78 MRINE & SHE SIL GR HOOK LEVIS EN L SLIP HOOK LEVIS EN E F L SLIP HOOK (SWIVEL EN WITH SFETY LTH) E L SLIP HOOK (EYE EN WITH SFETY LTH) L L HOOK NHOR E F ZZO STINLESS & LUMINIUM SLES

79 LOW FLT LET MRINE & SHE SIL TRIM LINE LET SKENE HOKS LUE WTER LET E ROPE LET HNLE E F G SKI TOW EYES STINLESS STEEL /8-16UN E F ZZO STINLESS & LUMINIUM SLES 77

80 MRINE & SHE SIL PUMP FILTER WIRE ROPE SHEVE PULLEY LOK- TYPE (PIN RIVET) NYLON SHEVE PULLEY LOK- TYPE (REMOVLE PIN WITH RIVET) NYLON SHEVE, ф PULLEY LOK- TYPE (WITH RKET N PIN RIVET) NYLON SHEVE, ф PULLEY LOK- TYPE (PIN RIVET) NYLON SHEVE PULLEY LOK- TYPE F (WITH PIN RIVET N RKET) NYLON SHEVE, E ZZO STINLESS & LUMINIUM SLES

81 MME SWIVEL LOK (STINLESS ST SHEVE WITH EYE EN), L MRINE & SHE SIL MME SWIVEL LOK (NYLON SHEVE) PIN WELE WELE REMOVLE SPLIT PIN MME SWIVEL LOK (OULE ST SHEVE) ф E F L MME SWIVEL LOK (OULE ST SHEVE WITH EYE EN), E L SEINE LOK (EYE TOP) E L SEINE LOK (HOOK TOP) L RTE SNTH LOK FOR ROPE E F TYPE R/V ROPE ROPE ROPE ZZO STINLESS & LUMINIUM SLES 79

82 MRINE & SHE SIL QUIK LINK WIE JW ELT SHPE QUIK LINK E L M5x M6x M7x M9x M10x M11x M12x M13x M15x M17x M19x M22x E L M5x M6x M7x M9x M10x M11x M12x M13x M15x M17x M19x M22x QUIK LINK QUIK LINK E M3.50x M4.50x M5.50x M6.50x M9.00x M10.50x1.25 E L M5x M6x M7x M9X M10x M11x M12x M13x M15x M17x M19x M22x ZZO STINLESS & LUMINIUM SLES

83 PER SHPE QUIK LINK E L M5x M6x M7x M9x M10x M11x M12x M13x M15x M17x M19x MRINE & SHE SIL SQURE SHPE QUIK LINK E L M5x M6x M7x M9x M10x M11x M12x M13x M15x M17x M19x LINK ZZO STINLESS & LUMINIUM SLES 81

84 MRINE & SHE SIL EK HINGE (NGLE SIE MOUNT) EK HINGE (NGLE SIE MOUNT WITH REMOVLE PIN) EK HINGE (RIL MOUNT) TUE inch 7/ EK HINGE (RIL MOUNT WITH REMOVLE PIN) TUE inch 7/ EK HINGE EK HINGE WITH REMOVLE PIN EK HINGE RIL FITTING (TOP SLIE P) TUE inch 3/ / RIL FITTING (TOP P) TUE inch 3/ / ZZO STINLESS & LUMINIUM SLES

85 ROUN RING WELE L ROUN RING (ENTRE ROSS R) WELE L WIRE SUPPORT -RING MRINE & SHE SIL ZZO STINLESS & LUMINIUM SLES 83

86 MRINE & SHE SIL EE RING WELE L OULE LYER EE RING WELE ф L TRINGLE RING WELE L LINH PIN E F ZZO STINLESS & LUMINIUM SLES

87 EE RING THIMLE -SHKLE LONG TYPE STNR -SHKLE ф L L MRINE & SHE SIL NHOR/OW SHKLE -SHKLE (WITH SLOT SINK PIN) L L ZZO STINLESS & LUMINIUM SLES 85

88 MRINE & SHE SIL -SHKLE (WITH HEXGONL SOKET SINK PIN) -SHKLE WIE TYPE L L SHKLE (WITH PTIVE PIN) L L SHKLE SEMI ROUN TYPE L SHKLE SEMI ROUN TYPE (WITH SLOT SREW PIN) L ZZO STINLESS & LUMINIUM SLES

89 STRP-SHKLE WITH SREW PIN L MRINE & SHE SIL HLYR SHKLE (WITH ROSS R & LOKING PIN) L HE OR SHKLE ROSS R N LOKING PIN E F G L M M M M HLYR SHKLE (WITH LOKING PIN) L TWIST SHKLE L SHKLE KEY SHKLE KEY-ST ZZO STINLESS & LUMINIUM SLES 87

90 MRINE & SHE SIL SWIVEL EYE N EYE L SWIVEL EYE N JW L SWIVEL JW N JW L SNP SHKLE FIXE EYE SWIVEL EYE OLT SNP L L ZZO STINLESS & LUMINIUM SLES

91 SNP SHKLE WITH ST SWIVEL JW L MRINE & SHE SIL SNP SHKLE WITH FORGE SWIVEL JW SNP SHKLE WITH ST SWIVEL EYE L L OULE OLT SNP L TRIGGER SNP (SWIVEL EN) L SWIVEL EYE SNP L RIGI EYE SNP L ZZO STINLESS & LUMINIUM SLES 89

92 MRINE & SHE SIL ULL SNP (SWIVEL EN) OULE LOKING SFETY HOOK E F L RIGI EYE SNP HOOK WITH SFETY LTH L LIFTING EYE NUT E F L M OULE EYE WITH INTERNL THRE E F G M8 EYE OLT L M L M M M M M M M M LIFTING EYE NUT (SUS TYPE) L M M M M M M M ZZO STINLESS & LUMINIUM SLES

93 EYE OLT (SUS TYPE) L M M M M M M M MRINE & SHE SIL OLONG P EYE (WITH RING) E F OLONG P EYE OLONG P EYE (OPEN) SQURE P EYE L E L L SQURE P EYE WITH RING IMON P EYE WITH RING E L E L ZZO STINLESS & LUMINIUM SLES 91

94 MRINE & SHE SIL IMON P EYE L SQURE P SWIVEL EYE (WITH RING) L SQURE P SWIVEL EYE, ROUN P EYE WITH RING L E F ROUN P EYE ROUN P EYE OLT (WITH RING) L E L ROUN P EYE (OPEN) L ZZO STINLESS & LUMINIUM SLES

95 ROUN P EYE OLT L M M M MRINE & SHE SIL U-OLT WITH WSHER N NUT E M M M M M M M M M12 V-OLT WITH WSHER N NUT U-OLT WITH WSHER N NUT M M M M M M M10 L L1 L2 L3 MM M M M M M M U OLTS WITH NUT N FLT WSHERS E 1/4 unc /4 unc /4 unc /4 unc /4 unc /4 unc /4 unc /4 unc /4 unc /16 unc /16 unc /8 unc /2 unc ZZO STINLESS & LUMINIUM SLES 93

96 MRINE & SHE SIL UTT HINGE- STNR LL STINLESS OMPLETE WITH SREWS- SOL PER PIR Size L W T Screw Size # # # # UTT HINGE WITH NYLON ERINGS OMPLETE WITH SREWS- SOL PER PIR Size L W T Screw Size # # # # UTT HINGE WITH NYLON ERINGS- OMMERIL QULITY OMPLETE WITH SREWS- SOL PER PIR Size L W T Screw Size 4x3x # 4x4x # UTT HINGE WITH STINLESS ERINGS- OMMERIL QULITY OMPLETE WITH SREWS- SOL PER PIR Size L W T Screw Size 4x4x # 4x4x # 5x4x # PINO HINGE SOL INIVIULLY Width Open Width losed Length Pin iameter T M25 (Undrilled) M32 (Undrilled) M32 (rilled) M38 (Undrilled) M50 (Undrilled) STINLESS STEEL HINGE, SOL INIVIULLY STINLESS STEEL HINGE, SOL INIVIULLY ZZO STINLESS & LUMINIUM SLES

97 OVER LTH ST L OW ROLLER E F MRINE & SHE SIL L-SHPE PLTE E F 90L L L L TOGGLE LTH JUSTLE N LOKLE SS304 Size L F JG JG TOGGLE LTH JUSTLE N LOKLE SS304 Size L F JG JG IN HOOK E F G H I STRP UKLE E RTHET UKLE ZZO STINLESS & LUMINIUM SLES 95

98 MRINE & SHE SIL STRP UKLE E RTHET UKLE FLUSH PULL SS FLUSH PULL SS STY-PUT (HORIZONTL N VERTIL) SS316 E F ORIENTTION VERTIL VERTIL HORIZONTL HORIZONTL FOLING EYE P SS316 E F ZZO STINLESS & LUMINIUM SLES

99 WING NUT (LONG TYPE) M M M M M M M22 MRINE & SHE SIL STINLESS STEEL LL (INTERNL THRE) ф M M6 STINLESS STEEL LL LUMINIUM RINER, URVE GTE 100 L LUMINIUM RINER 111 L LUMINIUM RINER, WITH LOKING NUT L LUMINIUM RINER, WITH LOKING NUT 111 L LUMINIUM RINER 111 L ZZO STINLESS & LUMINIUM SLES 97

100 MRINE & SHE SIL HOSE LMPS - LL STINLESS STEEL Universal Size iameter Range and Width X LIN RIVETS - LL STINLESS (RIVET & MNREL) OPEN TYPE Size Rivet iameter Grip Range rill Size Pkt Qty 4-2 1/8 up to 1/8 No 30 (3.3) /8 1/8-3/16 No 30 (3.3) /8 3/16-1/4 No 30 (3.3) /8 1/4-3/8 No 30 (3.3) /8 3/8-1/2 No 30 (3.3) /32 up to 1/8 No 20 (4.1) /32 1/8-1/4 No 20 (4.1) /32 1/4-3/8 No 20 (4.1) /16 up to 1/8 No 11 (4.8) /16 1/8-1/4 No 11 (4.8) /16 1/4-3/8 No 11 (4.8) /16 3/8-1/2 No 11 (4.8) /16 1/2-5/8 No 11 (4.8) /16 5/8-3/4 No 11 (4.8) 250 SREW EYES Size ф Std Pack ZZO STINLESS & LUMINIUM SLES

101 UP HOOK- SHOULERE Size ф Std Pack MRINE & SHE SIL EYE LG SREW WITH ROUN RING 1 2 L1 E T R d d1 8* ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ * ~ RING OLT WITH WSHER & NUT ф L M M M M M M M M M M M ZZO STINLESS & LUMINIUM SLES 99

102 LUMINIUM FLT R LUMINIUM R escription olour ode Finish Length Mass / Metre LT R 10 x 3MM 001 MILL LT R 12 x 1.6MM 001 MILL LT R 12 x 3MM 001 MILL LT R 12 x 6MM 001 MILL FLT R 16 x 3MM 001 MILL LT R 20 x 1.6MM 001 MILL LT R 20 x 3MM 001 MILL LT R 20 x 6MM 001 MILL LT R 25 x 1.6MM 001 MILL LT R 25 x 1.6MM 001 MILL LT R 25 x 3MM 001 MILL LT R 25 x 4MM 001 MILL FLT R 25 x 6MM 001 MILL LT R 25 x 10MM 001 MILL LT R 25 x 12MM 001 MILL LT R 32 x 3MM 001 MILL FLT R 32 x 6MM 001 MILL LT R 32 x 10MM 001 MILL LT R 40 x 3MM 001 MILL LT R 40 x 3MM 001 MILL LT R 40 x 4MM 001 MILL FLT R 40 x 6MM 001 MILL LT R 40 x 10MM 001 MILL LT R 50 x 3MM 001 MILL FLT R 50 x 6MM 001 MILL FLT R 50 x 6MM NV 001 MILL LT R 50 x 10MM 001 MILL LT R 50 x 12MM 001 MILL LT R 60 x 3MM 001 MILL FLT R 60 x 6MM 001 MILL LT R 60 x 10MM 001 MILL LT R 80 x 3MM 001 MILL FLT R 80 x 6MM 001 MILL LT R 80 x 10MM 001 MILL LT R 100 x 1.5MM 001 MILL LT R 100 x 1.5MM 001 MILL LT R 100 x 3MM 001 MILL LT R 100 x 10MM 001 MILL LT R 100 x 4MM 001 MILL FLT R 100 x 6MM 001 MILL LT R 150 x 1.5MM 001 MILL FLT R 160 x 6MM 001 MILL LT R 160 x 10MM 001 MILL ZZO STINLESS & LUMINIUM SLES

103 LUMINIUM NGLES escription olour ode Finish Length Mass / Metre Mass per Length 2 x 12 x 3MM NGLE 001 MILL x 16 x 3MM NGLE 001 MILL x 12 x 3MM NGLE 001 MILL x 20 x 3MM NGLE 001 MILL x 12 x 3MM NGLE 001 MILL x 20 x 2.5MM NGLE 001 MILL x 20 x 3MM NGLE 001 MILL x 25 x 3MM NGLE 001 MILL x 25 x 3MM NGLE 001 MILL x 20 x 3MM NGLE 001 MILL x 25 x 3MM NGLE 001 MILL x 32 x 3MM NGLE 001 MILL x 35 x 2MM NGLE MILL x 12 x 3MM NGLE 001 MILL x 20 x 3MM NGLE 001 MILL x 25 x 3MM NGLE 001 MILL x 40 x 3MM NGLE 001 MILL MILL x 40 x 4MM NGLE 001 MILL x 40 x 6MM NGLE 001 MILL MILL x 25 x 1.6MM NGLE N2 001 MILL x 20 x 3MM NGLE 001 MILL x 25 x 3MM NGLE 001 MILL x 50 x 3MM NGLE 001 MILL x 50 x 6MM NGLE 001 MILL x 25 x 3MM NGLE 001 MILL x 40 x 4MM NGLE 001 MILL x 60 x 3MM NGLE 001 MILL x 60 x 6MM NGLE 001 MILL x 40 x 1.6MM NGLE 001 MILL x 25 x 1.6MM NGLE 001 MILL x 25 x 3.0MM NGLE 001 MILL x 20 x 3MM NGLE 001 MILL MILL x 50 x 2.5MM NGLE E MILL x 80 x 6MM NGLE 001 MILL MILL x 80 x 6MM NGLE 6106 T6 001 MILL Q x 55 x 5MM NGLE 001 MILL x 40 x 1.6MM NGLE E MILL x 50 x 3MM NGLE 001 MILL x 50 x 4MM NGLE 001 MILL x 50 x 6.0MM NGLE ME MILL x 50 x 6MM NGLE 001 MILL x 76 x 3MM NGLE 001 MILL x 50 x 3MM NGLE 001 MILL MM OOLROOM NGLE 001 MILL R2 (T7490) NGLE 001 MILL R3 (L8340) 50MM OOLROOM NGLE 001 MILL R4 (L8530) 35MM OOLROOM NGLE 001 MILL L x 40MM NGLE W/V GROOVES 001 MILL MILL LUMINIUM R ZZO STINLESS & LUMINIUM SLES 101

104 LUMINIUM TRIM NGLE LUMINIUM R escription olour ode Finish Length Mass / Metre Mass per Length 2 x 12MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 16MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 25MM TRIM NGLE 001 MILL x 25MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 32MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 25MM TRIM NGLE 001 MILL x 40MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 25MM TRIM NGLE 001 MILL x 50MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 12MM TRIM NGLE 001 MILL x 20MM TRIM NGLE 001 MILL x 25MM TRIM NGLE 001 MILL x 40MM TRIM NGLE 001 MILL ZZO STINLESS & LUMINIUM SLES

105 LUMINIUM HNNEL escription olour ode Finish Length Mass / Metre Mass per Length HNNEL 100 x 25 x 3MM 001 MILL HNNEL 100 x 50 x 3MM 001 MILL HNNEL 10 x 10 x 1.6MM 001 MILL HNNEL 10 x 12 x 1.6MM 001 MILL HNNEL 12 x 12 x 1.6MM 001 MILL HNNEL 12 x 20 x 2.5MM 001 MILL HNNEL 16 x 16 x 1.6MM 001 MILL HNNEL 20 x 16 x 1.6MM 001 MILL HNNEL 20 x 20 x 1.6MM 001 MILL MILL HNNEL 20 x 20 x 2.5MM 001 MILL MILL HNNEL 20 x 20 x 3.0MM 001 MILL HNNEL 22 x 20 x 1.2MM 001 MILL HNNEL 25 x 12 x 3.0MM 001 MILL HNNEL 25 x 12 x 3.0MM 001 MILL HNNEL 25 x 20 x 1.6MM 001 MILL MILL HNNEL 25 x 20 x 2.5MM 001 MILL HNNEL 25 x 25 x 3MM 001 MILL HNNEL 25 x 40 x 3MM 001 MILL HNNEL 32 x 25 x 3MM 001 MILL HNNEL R/ 40 x 20 x 3.0MM 001 MILL HNNEL 40 x 25 x 3MM 001 MILL HNNEL 40 x 40 x 3MM 001 MILL HNNEL 50x25x3MM 001 MILL HNNEL 50 x 50 x 3MM 001 MILL HNNEL 60 x 32 x 3MM 001 MILL HNNEL R/ 60 x 32 x 3.0MM 001 MILL HNNEL 76.2MM x 38.1MM x 3.96MM 001 MILL HNNEL 76.2 x 38.1 x 7.92MM 001 MILL HNNEL 7 8x 25 x 1.6MM 001 MILL HNNEL 80 x 40 x 6MM MILL HNNEL 80 x 25 x 3MM 001 MILL HNNEL x 50.8 x 6/8 R 001 MILL HNNEL x 50.8 x 7.93MM 001 MILL HNNEL 127 x 63.5 x 9.52 x MILL HNNEL x 63.5 x 7.92MM 001 MILL LUMINIUM R ZZO STINLESS & LUMINIUM SLES 103

106 LUMINIUM TEES LUMINIUM R escription olour ode Finish Length Mass / Metre Mass per Length G3095 EILING TEE 36.5x MILL SETION 20 x 20 x 1.6MM 001 MILL MILL SETION 20 x 20 x 3MM 001 MILL MILL SETION 25 x 25 x 1.6MM 001 MILL MILL T-SETION 25 x 25 x 3MM 001 MILL SETION 40 x 20 x 1.6MM 001 MILL SETION 40 x 40 x 1.6MM 001 MILL MILL MILL T-SETION 40 x 40 x 3MM 001 MILL MILL LUMINIUM SOLIS escription olour ode Finish Length Mass / Metre Round Rod - I ROUN RO 10MM MILL ROUN RO 12MM MILL ROUN RO 12.7MM MILL ROUN RO 16MM MILL ROUN RO 20MM MILL ROUN RO 25MM MILL ROUN RO 28MM 001 MILL OUN RO 38.1MM MILL ROUN RO 50MM MILL OUN RO 6MM MILL Square ar - QURE R 6MM 001 MILL QURE R 10MM 001 MILL QURE R 12MM 001 MILL Le 104 ZZO STINLESS & LUMINIUM SLES

107 LUMINIUM ROUN TUE escription olour ode Finish Length Mass / Metre Mass per Length EXT.TUE 10 x 1.2MM 001 MILL EXT.TUE 12 x 1.6MM 001 MILL EXT.TUE x 1.6MM 001 MILL EXT.TUE x 1.42MM 6063T6 001 MILL XT.TUE 16 x 1.2MM 001 MILL XT. TUE 16 x 1.2MM T6 001 MILL XT. TUE 16 x 1.2MM T6 001 MILL XT. TUE 16 x 1.2MM T6 001 MILL XT.TUE 16 x 1.6MM 001 MILL XT.TUE 16 x 1.6MM 001 MILL XT.TUE 16 x 1.6MM 001 MILL XT.TUE 16 x 1.6MM 6060T MILL XT.TUE 19 x 1.2MM 6061 T6 001 MILL XT.TUE 19 x 1.2MM 6061 T6 001 MILL XT.TUE 19 x 1.6MM 001 MILL XT.TUE 19 x 1.6MM 001 MILL XT.TUE x 1.3MM 001 MILL XT.TUE x 1.0MM 001 MILL XT.TUE 20 x 1.6MM 001 MILL XT.TUE 20 x 2.25MM MILL XT.TUE 20 x 1.6MM 6060 T MILL XT.TUE 25 x 1.6MM 001 MILL EXT.TUE 25 x 1.6MM T MILL EXT.TUE 25 x 3MM 6060 T MILL XT.TUE 25 x 3MM 001 MILL XT.TUE 25 x 3MM 001 MILL XT.TUE 25 x 3MM 6061 T6 001 MILL XT.TUE 32 x 2MM T MILL XT.TUE 32 x 3MM 001 MILL XT.TUE 32 x 3MM 001 MILL XT.TUE 32 x 3MM 6060 T MILL XT.TUE 38.1 x 2.39MM X MILL XT.TUE 40 x 1.6MM 001 MILL XT.TUE 40 x 3MM 001 MILL XT.TUE 40 x 3MM T MILL XT.TUE 40 x 3MM T MILL XT.TUE 40 x 3MM T MILL XT.TUE 44.5 x 3.20MM 001 MILL XT.TUE 50 x 1.6MM 001 MILL XT.TUE 50 x 2MM 6060T MILL XT.TUE 50 x 3MM 001 MILL XT.TUE 50 x 3MM T MILL XT.TUE 50 x 3MM T MILL XT.TUE 50 x 4MM 6060T1 001 MILL XT.TUE 50 x 4MM 6106 T6 001 MILL XT.TUE 50 x 5MM 6106T6 001 MILL XT.TUE 50 x 6MM 6106 T6 001 MILL EXT.TUE 50.8 x 1.6MM 001 MILL XT.TUE x 5.38MM 001 MILL XT.TUE 60 x 2MM 001 MILL XT.TUE 60 x 3MM 001 MILL XT.TUE 60 x 3MM 001 MILL XT.TUE 60 x 3MM T MILL XT.TUE 60 x 3MM T4 001 MILL XT.TUE 60 x 5MM 001 MILL XT.TUE 63.5x 6.35MM 6106T6 001 MILL XT.TUE 76 x 1.6MM 001 MILL EXT.TUE 76.2MM x 1.25MM 001 MILL XT.TUE 80 x 3MM LH T5 001 MILL XT.TUE 88.9 x 2.9MM 001 MILL XT.TUE 100 x 3MM 001 MILL XT.TUE 8MM LNING NET TUE 001 MILL SFFOL TUE 48.4 x 4.47MM 001 MILL SFFOL TUE 48.4 x 4.47MM 001 MILL LUMINIUM TUE ZZO STINLESS & LUMINIUM SLES 105

108 LUMINIUM SQURE OX LUMINIUM TUE escription olour ode Finish Length Mass / Metre Mass per Length OX SQURE 12.7MM x 1.55MM 001 MILL OX SQURE 12.7MM x 1.55MM 001 MILL OX SQURE 16MM x 1.2MM 001 MILL OX SQURE 19.05MM x 1.15MM 001 MILL OX SQURE 19.05MM x 1.2MM 001 MILL OX SQURE 19MM x 1.6MM 001 MILL OX SQURE 20MM x 1.6MM 001 MILL OX SQURE 20MM x 3MM 001 MILL OX SQURE 25.4MM WITH LEG 001 MILL OX SQURE 25MM x 1.6MM 001 MILL OX SQURE 25MM x 2MM 001 MILL OX SQURE 25MM x 3MM 001 MILL OX SQURE 25MM x 3MM 001 MILL OX SQURE 31.75MM x 3.18MM 001 MILL OX SQURE 31.75MM x 3.2MM 001 MILL OX SQURE 32MM x 2MM 001 MILL OX SQURE 32MM x 3MM 001 MILL OX SQURE 40MM x 1.6MM 001 MILL OX SQURE 40MM x 1.6MM 001 MILL OX SQURE 40MM x 2MM 001 MILL OX SQURE 40MM x 3MM 001 MILL OX SQURE 45MM x 1.8MM S7 001 MILL OX SQURE 50MM x 1.6MM 001 MILL OX SQURE 50MM x 1.6MM 001 MILL OX SQURE 50MM x 2.5MM 001 MILL OX SQURE 50MM x 2MM 001 MILL OX SQURE 50MM x 2MM 001 MILL OX SQURE 50MM x 3MM 001 MILL OX SQURE 50MM x 3MM MILL OX SQURE 65.5MM x 1.6MM 001 MILL OX SQURE 65.5MM x 1.6MM 001 MILL OX SQURE 65MM x 2.5MM 001 MILL QURE TUE 90 x 90 x 2MM 001 MILL OX SQURE 100 x 3.0MM (4335) 001 MILL OX SQURE 100MM x 3.0MM 001 MILL OX RIUS x 1.6MM S2 001 MILL OX RIUS 19.05MM x 1.83MM 001 MILL OX RIUS 20MM x 3MM 6106 T6 001 MILL OX RIUS 20MM x 3MM 001 MILL OX RIUS 25.4 x 3.25MM 001 MILL OX RIUS 25.4MM x 1.22MM 001 MILL OX RIUS 25.4MM x 1.22MM 001 MILL ZZO STINLESS & LUMINIUM SLES

109 LUMINIUM SQURE OX escription olour ode Finish Length Mass / Metre Mass per Length OX RIUS 40MM x 2MM 001 MILL OX RIUS 40MM x 3MM 001 MILL R10 40MM STRUTURL POST 001 MILL R10 40MM STRUTURL POST 001 MILL MM x 50MM POST 001 MILL MM x 50MM POST 001 MILL MM x 50MM POST 001 MILL MM x 50MM POST 001 MILL OX RIUS 50MM x 1.8MM 001 MILL OX RIUS 50MM x 1.8MM 001 MILL OX RIUS 50MM x 1.8MM 001 MILL OX RIUS 50MM x 2MM 001 MILL OX RIUS 50MM x 5.0MM 001 MILL OX RIUS 50x50x3.0MM 001 MILL OX RIUS 50.8MM x 1.6MM 001 MILL OX RIUS 50.8MM x 2.03MM 001 MILL OX RIUS 50.8MM x 2.03MM 001 MILL OX RIUS 50.8MM x 2.03MM 001 MILL OX RIUS 50.8MM x 2MM 001 MILL OX RIUS 50.8MM x 3.18MM 001 MILL OX RIUS 50.8MM x 3MM 001 MILL OX RIUS 50.8MM x 3MM 6106 T6 001 MILL OX RIUS 75MM x 3MM 001 MILL OX RIUS 75MM x 3MM 001 MILL R12 80MM POST 001 MILL MM FLUTE POST 001 MILL MM x 90MM POST 001 MILL OX RIUS 100MM x 3.2MM 001 MILL OX RIUS 25.4MM x 1.2MM 001 MILL OX RIUS 25MM x 1.5MM 001 MILL OX RIUS 25MM x 2MM 001 MILL OX RIUS 25MM x 3MM 001 MILL OX RIUS 30MM x 1.6MM 001 MILL OX RIUS 32MM x 2.5MM 001 MILL OX RIUS 32MM x 3.0MM 001 MILL OX RIUS 37.35MM x 2.5MM 001 MILL OX RIUS 40MM x 2MM 001 MILL LUMINIUM TUE ZZO STINLESS & LUMINIUM SLES 107

110 LUMINIUM RETNGULR HOLLOW SETION LUMINIUM TUE escription olour ode Finish Length Mass / Metre Mass per Length HS OX 38.1 x x 3.18MM 001 MILL HS OX 38.1 x 25.4 x 2.54MM 001 MILL HS OX 40 x 20 x 3MM 001 MILL HS OX 40 x 25 x 2.4MM 001 MILL HS OX 40 x 25 x 2.5MM 001 MILL HS OX 50 x 10 x 1.3MM 001 MILL HS OX 50 x 25 x 1.6MM 001 MILL HS OX 50 x 25 x 3MM 001 MILL MILL HS OX 50 x 40 x 3MM 001 MILL HS OX 60 x 40 x 3MM 001 MILL HS OX 70 x 30 x 3MM 001 MILL HS OX 75 x 50 x 3MM 001 MILL HS OX 76.2 x 25.4 x 2.4MM 001 MILL HS OX 76.2 x 50.8 x3.18mm 001 MILL HS OX 80 x 40 x 3MM 001 MILL HS OX 80 x 50 x 3MM 001 MILL HS OX 80 x 50 x 3MM MILL HS OX 100 x 25 x 1.6MM 001 MILL HS OX 100 x 25 x 2.5MM 001 MILL HS OX 100 x 50 x 3MM 001 MILL RHS OX 125 x 40 x 3MM 001 MILL HS OX 250 x 50 x 3MM 001 MILL MILL HS R.OX 38 x 25 x 1.5MM MILL HS R.OX 38.1 x 25.4 x 1.6MM 001 MILL RHS R38 x 25 x 1.5MM /P16.7/90MM TR 001 MILL MILL RHS R38 x 25 x 1.5MM S/P16.7/90MM TR 001 MILL MILL HS R OX 38 x 25 x 1.5MM 001 MILL MILL HS R OX 38 x 25 x 1.5MM 6060 T6 001 MILL HS R OX 38 x 25 x 2MM 001 MILL HS R OX 38.1 x 25.4 x 1.5MM 001 MILL MILL HS R OX 38.1 x 25.4 x 2.5MM 001 MILL HS R OX 50 x 25 x 3MM 001 MILL HS R OX 50.8 x 11 x 1.3MM 001 MILL RHS R OX 50.8 x 25.4 x 2.5MM 001 MILL HS R OX 65 x 16 x 1.2MM 001 MILL HS R OX 65 x 16 x 1.4MM 001 MILL RHS R OX 65 x 16 x 1.27MM WITH WE 001 MILL UR SLT 65 x 16 x 1.4MM 001 MILL MILL MILL RHS R OX 100 x 16 x 1.2MM WITH WE 001 MILL HS R OX 100 x 50 x 3MM 001 MILL HS R OX 100 x 50 x 3MM (6MM R/) 001 MILL HS R OX 100 x 50 x 6MM 001 MILL HS R OX x 76.2 x 2.29MM 001 MILL PURLIN 100x50x1.6MM 001 MILL MILL MILL PURLIN 76.2x50.8x1.6MM 001 MILL PURLIN 100x50x3MM 001 MILL MILL HS R OX 150 x 50 x 3MM 001 MILL PURLIN 150x50x3MM 001 MILL MILL PURLIN 200 x 50 x 3MM 001 MILL MILL ZZO STINLESS & LUMINIUM SLES

111 FENING & LUSTR ItemName olour ode escription Length Mass / Metre Mass per Length XT. TUE 16 x 1.2MM T6 001 MILL XT. TUE 16 x 1.2MM T6 001 MILL XT. TUE 16 x 1.2MM T6 001 MILL EXT.TUE x 1.6MM 001 MILL EXT.TUE x 1.42MM 6063T6 001 MILL XT.TUE 16 x 1.2MM 001 MILL XT.TUE 16 x 1.6MM 001 MILL XT.TUE 16 x 1.6MM 001 MILL XT.TUE 16 x 1.6MM 001 MILL XT.TUE 16 x 1.6MM 6060T MILL XT.TUE 19 x 1.2MM 6061 T6 001 MILL XT.TUE 19 x 1.2MM 6061 T6 001 MILL XT.TUE 19 x 1.6MM 001 MILL XT.TUE 19 x 1.6MM 001 MILL OOPE TUE 16 x 1.2MM 90.8TRS 001 MILL HS R OX 38 x 25 x 1.5MM 001 MILL HS R OX 38 x 25 x 1.5MM 001 MILL HS R OX 38 x 25 x 1.5MM 6060 T6 001 MILL HS R OX 38 x 25 x 2MM 001 MILL HS R OX 38.1 x 25.4 x 1.5MM 001 MILL HS R OX 38.1 x 25.4 x 2.5MM 001 MILL RHS R 38 x 25x1.5MM /P16.7/90MM TR 001 MILL RHS R 38 x 25x1.5MM /P16.7/90MM TR 001 MILL RHS R 38 x 25x1.5MM S/P16.7/90MM TR 001 MILL RHS R 38 x 25x1.5MM S/P16.7/90MM TR 001 MILL RHS R 38 x 25 x 1.5MM /P 100MM TRS 001 MILL RHS R 38 x 25 x 1.5MM S/P 100MM TRS 001 MILL OX RIUS 25MM x 1.5MM 001 MILL OX RIUS 40MM x 2MM 001 MILL OX RIUS 40MM x 2MM 001 MILL OX RIUS 40MM x 3MM 001 MILL OX RIUS 50.8MM x 1.6MM 001 MILL OX RIUS 50.8MM x 2.03MM 001 MILL OX RIUS 50.8MM x 2.03MM 001 MILL OX RIUS 50.8MM x 2.03MM 001 MILL OX RIUS 50.8MM x 2MM 001 MILL OX RIUS 50.8MM x 3.18MM 001 MILL OX RIUS 50.8MM x 3MM 001 MILL OX RIUS 50.8MM x 3MM 6106 T6 001 MILL OX RIUS 50MM x 1.8MM 001 MILL OX RIUS 50MM x 1.8MM 001 MILL OX RIUS 50MM x 1.8MM 001 MILL OX RIUS 50MM x 1.8MM 059 STIN LK OX RIUS 50MM x 1.8MM 059 STIN LK ItemName olour ode escription Length Mass / Metre Mass per Length OX RIUS 50MM x 2MM 001 MILL OX RIUS 50MM x 5.0MM 001 MILL OX RIUS 50 x 50 x 3.0MM 001 MILL OX RIUS 65MM x 3MM 001 MILL HS OX 38.1 x 25.4 x 2.54MM 001 MILL UR SLT 65 x 16 x 1.4MM 001 MILL UR SLT 65 x 16 x 1.4MM 001 MILL UR SLT 65 x 16 x 1.4MM 001 MILL HNNEL 20 x 20 x 1.6MM 001 MILL HNNEL 20 x 20 x 1.6MM 001 MILL FP1 FENE POST 001 MILL P2 90 EG FENE POST 001 MILL P3 180 EG FENE POST 001 MILL RHS R OX 100 x 16 x 1.2MM WITH WE 001 MILL HS R OX 50 x 25 x 3MM 001 MILL HS R OX 50.8 x 11 x 1.3MM 001 MILL RHS R OX 50.8 x 25.4 x 2.5MM 001 MILL RHS R OX 50.8 x 25.4 x 2.5MM UM LER NOISE HS R OX 65 x 16 x 1.2MM 001 MILL HS R OX 65 x 16 x 1.4MM 001 MILL HS R.OX 38 x 25 x 1.5MM MILL HS R.OX 38.1 x 25.4 x 1.6MM 001 MILL HNRIL P 001 MILL /FOIL GLZ RIL JG 001 MILL LUMINIUM FENING ZZO STINLESS & LUMINIUM SLES 109

112 FENING & LUSTR ItemName olour escription Mass / Mass per ode Length Metre Length TE FRME 40 x 24MM TR 001 MILL ItemName olour escription Mass / Mass per ode Length Metre Length R10 40MM STRUTURL POST 001 MILL MM GTE TRK 001 MILL R10 40MM STRUTURL POST UM LER NOISE MM SLIING GTE TRK 001 MILL R1 60MM TOPRIL 001 MILL R12 80MM POST 001 MILL R15 60MM OVL RIL P 001 MILL R1 60MM TOPRIL 001 MILL R15 60MM OVL RIL P UM LER NOISE LUMINIUM FENING R1 60MM TOPRIL UM LER NOISE R10 40MM STRUTURL POST 001 MILL R16 LEG HNNEL 001 MILL R18 50MM GLZING ROUN 001 MILL R18 50MM GLZING ROUN 001 MILL ZZO STINLESS & LUMINIUM SLES

113 FENING & LUSTR ItemName HR MM SQ/2WY 90EG GLZ POST olour ode escription Length Mass / Metre Mass per Length 001 MILL ItemName olour ode escription Length Mass / Metre Mass per Length R9 16 x 16MM OX 001 MILL R9 16 x 16MM OX 001 MILL HNRIL P 001 MILL R MM RN/1 WY GLZ POST 001 MILL HNRIL HNNEL 001 MILL HR MM RN/2 WY 180EG GL/ PST 001 MILL HNRIL INFILL 001 MILL R x 30 ENTRE GLZE POST 001 MILL HNRIL P 001 MILL HR7411 ELLIPTIL GLZING RIL 001 MILL LLISTER 001 MILL R7422 ELLIPTIL H/RIL 001 MILL R MM SQ. POST GTE PT 001 MILL LUMINIUM FENING R MM RN HLF POST 001 MILL R7540 HNRIL 60MM TOP RIL 001 MILL ZZO STINLESS & LUMINIUM SLES 111

114 MRINE escription olour ode Finish Length Mass / Metre Mass per Length oon hannels HNNEL R/ 40 x 20 x 3.0MM 001 MILL HNNEL R/ 60 x 32 x 3.0MM 001 MILL endable Tubes EXT.TUE 25 x 3MM 6060 T MILL XT.TUE 32 x 3MM 001 MILL XT.TUE 32 x 3MM 6060 T MILL Marine Extrusions OT HINE 4.25 & 5.25MM 001 MILL escription olour ode Finish Length Mass / Metre Mass per Length LT OT FSI 90MM 001 MILL MILL TRIM SETION 001 MILL OT GUNWHLE 4.25MM 001 MILL (L3648) SIL TRK 001 MILL OT KEEL 001 MILL MILL (L3648) SIL TRK 001 MILL MRINE HINE 001 MILL TOP HT 001 MILL MRINE OT RI 001 MILL HNNEL GUNNEL 001 MILL P1 OYSTER PUNT 001 MILL U9824 MRINE GUNWLE 39MM 001 MILL INT OT OMING 001 MILL LT OT FI 50MM 001 MILL LUMINIUM MRINE escription olour ode Finish Length Mass / Metre Mass per Length IE OT FI 50MM 001 MILL Marine Sheet, oil & Plate HEET 3.0 x 1200 x 6100MM 5083 H MILL SHEET 4.0MM x 1200 x 6100MM 5083 H MILL SHEET 4.0MM x 1200 x 6100MM 5052 H MILL OIL 1.6MM x 1200MM 5052 H MILL OIL 2.0MM x H MILL OIL 3.0MM x H MILL 112 ZZO STINLESS & LUMINIUM SLES

115 SIGNGE ItemName 152 x 18MM T EGE SIGN LE 6063 T6 olour ode Length Mass / Metre Mass per Length 001 MILL ItemName K8891 MOUNTING HNNEL (SIGNS) 6063 T6 olour ode escription escription Length Mass / Metre Mass per Length 001 MILL RGE KING RIL 001 MILL MLE POST RKET 6063 T6 001 MILL x 12.7MM SIGN LE 6063 T6 001 MILL E MM SIGN OX 001 MILL x 30MM RRIER OR 6063 T6 001 MILL x 19MM T EGE SIGN LE 6063 T6 001 MILL S1 150MM SIGN OX (N6532) 001 MILL MILL S10 50MM JOINER (N5150) 001 MILL x 12.7MM SIGN LE 6063 T6 001 MILL S2 150MM SIGN OX (N7830) 001 MILL x 15.88MM H SIGN LE 6063 T6 001 MILL S3 200MM SIGN OX (N7831) 001 MILL FEMLE POST RKET 6063 T6 001 MILL MILL MOUNTING HNNEL (SIGNS) 001 MILL S4 250MM SIGN OX (N5142) 001 MILL S5 100MM SIGN OX (N9033) 001 MILL Road Sign Sheet SHEET 1.55MM x 1200 x 2400MM 5052 H38 SHEET 1.55MM x 1200 x 3000MM 5052 H38 SHEET 1.55MM x 750 x 3000MM 5052 H38 SHEET 1.55MM x 900 x 2400MM 5052 H38 SHEET 1.6MM x 1200 x 1800MM 5052 H38 SHEET 1.6MM x 1200 x 2400MM 5052H38 SHEET 1.6MM x 750 x 3000MM 5052 H38 SHEET 1.6MM x 900 x 2400MM 5052 H38 SHEET 1.6MM x 900 x 1800MM 5052 H38 luminium omposite Panel.0 x 1220 x 2440 Signbond.0 x 1220 x 3050 Signbond.0 x 1500 x 3050 Signbond.0 x 1220 x 2440 Signbond LINISHE OTH SIES LINISHE OTH SIES LINISHE OTH SIES LINISHE OTH SIES MIL MIL MIL MIL MIL White Gloss / W Satin White Gloss / W Satin White Gloss / W Satin White Gloss / W Satin LUMINIUM SIGNGE ZZO STINLESS & LUMINIUM SLES 113

116 LUMINIUM SHEET, OIL & TRE PLTE escription olour ode Finish KG/ Sheet 5005 Range SHEET 0.6MM x 1200 x 2400MM MIL SHEET 0.7MM x 1200 x 1950MM STUO 001 MIL SHEET 0.8MM x 1200 x 2400MM MIL SHEET 0.8MM x 1200 x 2400MM PV ONE SIE HEET 1.0MM x 1200 x 2400MM MIL HEET 1.0MM x 1200 x 2400MM PV ONE SIE HEET 1.0MM x 1200 x 2400MM WHITE P/ ONE SIE HEET 1.2MM x 1200 x 2400MM MIL HEET 1.2MM x 1200 x 2400MM WHITE ONE SIE PV HEET 1.2MM x 1200 x 2400MM PV ONE SIE HEET 1.2MM x 1200 x 2400MM WHITE P/ ONE SIE HEET 1.2MM x 1200 x 3000MM MIL HEET 1.2MM x 1200 x 3000MM WHITE ONE SIE PV HEET 1.2MM x 1200 x 3600MM MIL HEET 1.2MM x 1200 x 3600MM WHITE ONE SIE PV HEET 1.2MM x 1200 x 3600MM PV ONE SIE HEET 1.5MM x 1200 x 2400MM PV ONE SIE HEET 1.5MM x 1200 x 3000MM PV ONE SIE HEET 1.5MM x 1200 x 3600MM PV ONE SIE HEET 1.6MM x 1200 x 2400MM ELGEE 044 PV ONE SIE HEET 1.6MM x 1200 x 2400MM 5005 H MILL HEET 1.6MM x 1200 x 2400MM 5005 H PV ONE SIE HEET 1.6MM x 1200 x 2400MM 5005 H WHITE P/ ONE SIE HEET 1.6MM x 1200 x 3000MM MIL HEET 1.6MM x 1200 x 3000MM PV ONE SIE SHEET 1.6MM x 1200 x 3000MM 5005 H MIL HEET 1.6MM x 1200 x 3600MM MIL HEET 1.6MM x 1200 x 3600MM PV ONE SIE SHEET 1.6MM x 1200 x 3600MM 5005 Q 001 MIL HEET 1.6MM x 1500 x 3000MM MILL HEET 1.6MM x 1500 x 3600MM MIL HEET 1.6MM x 900 x 1800MM MIL HEET 1.6MM x 900 x 1800MM PV ONE SIE HEET 2.0MM x 1200 x 2400MM MIL HEET 2.0MM x 1200 x 2400MM PV ONE SIE HEET 2.0MM x 1200 x 3000MM MIL HEET 2.0MM x 1200 x 3000MM PV ONE SIE HEET 2.0MM x 1200 x 3600MM MIL HEET 2.0MM x 1200 x 3600MM PV ONE SIE HEET 2.0MM x 1500 x 2400MM MIL HEET 2.0MM x 1500 x 3000MM MIL HEET 2.0MM x 1500 x 3600MM MIL HEET 2.5MM x 1200 x 2440MM 5005H PV ONE SIE HEET 2.5MM x 1200 x 2400MM MIL HEET 2.5MM x 1200 x 2400MM PV ONE SIE HEET 3.0MM x 1200 x 2440MM 5005H PV ONE SIE HEET 3.0MM x 1200 x 2400MM MIL HEET 3.0MM x 1200 x 2400MM PV ONE SIE HEET 3.0MM x 1200 x 3000MM MIL HEET 3.0MM x 1200 x 3600MM MIL HEET 3.0MM x 1200 x 3600MM PV ONE SIE HEET 3.0MM x 1500 x 2400MM MIL escription olour ode Finish KG/ Sheet HEET 3.0MM x 1500 x 3000MM MIL HEET 3.0MM x 1500 x 3000MM PV ONE SIE SHEET 3.0MM x 1500 x 3600MM MIL SHEET 3.0MM x 1500 x 3600MM PV ONE SIE SHEET 4.0MM x 1200 x 2400MM MIL HEET 4.0MM x 1200 x 3600MM MIL HEET 4.0MM x 1500 x 3000MM MIL HEET 5.0MM x 1200 x 2400MM MIL SHEET 6.0MM x 1200 x 2400MM MIL TUO 0.6MM x 1200 x 2400MM Stucco Embossed MF nodising Quality 57S & lear nodised Sheet Range HEET 1.0MM x 1200 x 2400MM F4 15UM LER N.1 SIE HEET 1.2MM x 1200 x 2400MM UM LE HEET 1.2MM x 1200 x 2400MM V9 15UM LR/PV OTE HEET 1.2MM x 1200 x 3000MM UM LE HEET 1.2MM x 1200 x 3600MM UM LE HEET 1.2MM x 1200 x 3600MM V9 15UM LR/PV OTE SHEET 1.2MM x 1200 x 2400MM S 0F4 15UM LER N.1 SIE SHEET 1.2MM x 1200 x 2400MM S 0V9 15UM LR/PV OTE SHEET 1.2MM x 1200 x 3000MM S 001 MIL SHEET 1.2MM x 1200 x 3000MM S 0F4 15UM LER N.1 SIE SHEET 1.2MM x 1200 x 3000MM S 0V9 15UM LR/PV OTE SHEET 1.2MM x 1200 x 3600MM S 0F4 15UM LER N.1 SIE SHEET 1.2MM x 1200 x 3600MM S 0V9 15UM LR/PV OTE SHEET 1.6MM x 1200 x 2400MM 5005 H14 Q UM LE HEET 1.6MM x 1200 x 2400MM 5005 H UM LE HEET 1.6MM x 1200 x 2400MM 5005 H UM LER OTH SIE HEET 1.6MM x 1200 x 2400MM 5005 H UM LE SHEET 1.6MM x 1200 x 2400MM 5005 Q 0V9 15UM LR/PV OTE HEET 1.6MM x 1200 x 3000MM UM LE HEET 1.6MM x 1200 x 3000MM F4 15UM LER N.1 SIE SHEET 1.6MM x 1200 x 3000MM 5005 H34 0V9 15UM LR/PV OTE HEET 1.6MM x 1200 x 3600MM F4 15UM LER N.1 SIE SHEET 1.6MM x 1200 x 3600MM 5005 H14 Q UM LE SHEET 1.6MM x 1200 x 3600MM 5005 Q 0V9 15UM LR/PV OTE HEET 2.0MM x 1200 x 2400MM F4 15UM LER N.1 SIE HEET 3.0MM x 1200 x 2400MM F4 15UM LER N.1 SIE Range HEET 1.0MM x 1200 x 2400MM 5052H MILL HEET 1.2MM x 1200 x 2400MM 5052H MILL HEET 1.2MM x 1200 x 4330MM 5052 H MILL SHEET 1.6MM x 1200 x 1800MM 5052 H MIL LUMINIUM FLT 114 ZZO STINLESS & LUMINIUM SLES

117 LUMINIUM SHEET, TRE PLTE & PROPELLOR RIGHT escription olour ode Finish KG/ Sheet HEET 1.6MM x 1200 x 2400MM 5052H MILL HEET 1.6MM x 1200 x 2400MM 5052H MILL HEET 1.6MM x 750 x 3000MM 5052 H MILL HEET 1.6MM x 900 x 1800MM 5052 H MILL HEET 1.6MM x 900 x 2400MM 5052 H MILL HEET 2.0MM x 1200 x 2400MM 5052H MILL HEET 2.5MM x 1200 x 2400MM 5052H MILL SHEET 2.5MM x 1500 x 2400MM 5052/ H MIL HEET 2.5MM x 1500 x 3000MM 5052H MILL HEET 2.5MM x 1500 x 3000MM 5052H PV ONE SIE HEET 3.0MM x 1200 x 2400MM 5052H MILL HEET 3.0MM x 1200 x 2400MM 5052H PV ONE SIE SHEET 3.0MM x 1200 x 6000MM 5052 H MIL HEET 2.0MM x 1200 x 3000MM 5251H MILL HEET 3.0MM x 1200 x 3600MM 5251H MILL HEET 3.0MM x 1500 x 2500MM 5251H MILL HEET 4.0MM x 1200 x 2400MM 5251H MILL SHEET 4.0MM X 1200 X 6100MM 5052 H MIL Plate Range HEET 3.0 x 1200 x 2400MM 5083 H MIL HEET 3.0 x 1200 x 6100MM 5083 H MIL HEET 3.0MM x 1525 x 6100MM MIL SHEET 4.0MM x 1200 x 6100MM 5083 H MIL LTE 6.0 x 1200 x 2400MM 5083 H MIL PLTE 8.0 x 1200 x 2400MM 5083 H MIL LTE 10.0 x 1200 x 2400MM 5083 H MIL LTE 12.0 x 1200 x 2400MM 5083 H MIL LTE 12.0 x 1200 x 2400MM 5083 H MIL Tread Plate Range TREPLTE 1.6MM x 1200 x 2400MM MIL TREPLTE 1.6MM x 1200 x 2400MM UM LK NOISE TREPLTE 1.6MM x 1200 x 3600MM MIL TREPLTE 1.6MM x 1500 x 2400MM MIL TREPLTE 2.0MM x 1200 x 2400MM MIL TREPLTE 2.5MM x 1200 x 2400MM MIL TREPLTE 2.5MM x 1500 x 2400MM MIL TREPLTE 3.0MM x 1200 x 2400MM MIL TREPLTE 3.0MM x 1200 x 3600MM MIL TREPLTE 3.0MM x 1500 x 2400MM MIL TREPLTE 3.0MM x 1500 x 3000MM MIL TREPLTE 3.0MM x 1500 x 3600MM MIL TREPLTE 4.0MM x 1200 x 2400MM MIL TREPLTE 5.0MM x 1200 x 2400MM MIL TREPLTE 5.0MM x 1200 x 3600MM MIL TREPLTE 6.0MM x 1200 x 2400MM MIL Propeller Plate PROPELLER PLTE 1.0 x 1219 x 2438MM 001 MIL PROPELLER PLTE 1.6MM x 1219 x 2438MM 3003 H MIL PROPELLER PLTE 2.03MM x 1219 x 2438MM 3003 H MIL PROPELLER PLTE 2.28MM x 1219 x 2438MM 001 MIL PROPELLER PLTE 3.18MM x 1219 x 2438MM 3003 H MIL PROPELLER PLTE 4.76MM x 1219 x 2438MM 3003 H MIL LUMINIUM FLT ZZO STINLESS & LUMINIUM SLES 115

118 FSTENERS - NHOR Including but not limited to FSTENERS Finish nchor Maximum Overall rill Fixture Hole Min Hole Socket Qty Size Fixture nchor iameter iameter epth Size () Thickness Length () () () () () () ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZIN Minus Fixture Thickness GLVNISE Minus Fixture Thickness ZZO STINLESS & LUMINIUM SLES

119 FSTENERS - NHOR Including but not limited to Thread Ø Max Fixture Thickness () Overall nchor Length () Hole Ø () Fixture Hole iameter () Min Hole epth () Effective Length () Order Qty M M M M M M M M M M M M M M M M M M M Z / 5GH M M FSTENERS Konstrukt hemical nchor is a fast curring, two part polyester injection system for anchoring threaded rod and rebar into concrete. - Styrene Free - Low VO - Less wastage - Patented non-cut opening & sealing system Thread Size M8 M10 M12 M12 M16 M20 M24 Total Length () rill Hole iameter () rill Hole epth () Max Fixture Thickness () Thread Size M8 M10 M12 M16 M20 M24 rill Hole iameter () Total Length () rill Hole epth () ZZO STINLESS & LUMINIUM SLES 117

120 FSTENERS - OMMERIL Including but not limited to FSTENERS FSTENERS - HI-TENSILE Including but not limited to FSTENERS - ERTHMOVING, WSHERS & LOW-TENSILE Including but not limited to FSTENERS - NYLON Including but not limited to 118 ZZO STINLESS & LUMINIUM SLES

121 RSIVES Including but not limited to RSIVES ZZO STINLESS & LUMINIUM SLES 119

122 RSIVES Including but not limited to RSIVES 120 ZZO STINLESS & LUMINIUM SLES

123 FILES & RSPS Including but not limited to TOOLS ZZO STINLESS & LUMINIUM SLES 121

124 MESURING & UTTING TOOLS Including but not limited to PREISION EQUIPMENT RILL & RIVER ITS TOOLS HOLE SW & N SW LES WE OFFER RNGE OF QULITY SWS & LES Y: 122 ZZO STINLESS & LUMINIUM SLES

125 MESURING & UTTING TOOLS Including but not limited to TP & IES HN TOOLS WE OFFER RNGE OF QULITY HN TOOLS Y: TOOLS ZZO STINLESS & LUMINIUM SLES 123

126 ELETROES GENERL PURPOSE ELETROES Including but not limited to HYROGEN ONTROLLE ELETROES Including but not limited to STINLESS STEEL ELETROES Including but not limited to SPEIL ELETROES Including but not limited to WELING & FINISHING LOW LLOY ELETROES Including but not limited to 124 ZZO STINLESS & LUMINIUM SLES

127 MIG WIRES MIL STEEL MIG WIRE Including but not limited to MIL STEEL PIL PKS & ESSORIES Including but not limited to FLUX ORE MIG WIRE Including but not limited to WELING & FINISHING LOW LLOY MIG WIRE Including but not limited to (OPPER LLOY) ZZO STINLESS & LUMINIUM SLES 125

128 MIG WIRES STINLESS STEEL MIG WIRE Including but not limited to LUMINIUM MIG WIRE Including but not limited to LUMINIUM MIG WIRE PIL PKS & ESSORIES Including but not limited to WELING & FINISHING HRFING MIG WIRE Including but not limited to 126 ZZO STINLESS & LUMINIUM SLES

129 TIG & GS ROS MIL STEEL TIG ROS Including but not limited to OPPER & OPPER LLOY TIG ROS Including but not limited to STINLESS STEEL TIG ROS Including but not limited to LUMINIUM LLOY TIG ROS Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 127

130 TIG & GS ROS SILVER RZING LLOYS Including but not limited to SOLER & ZIN LLOYS Including but not limited to LOW LLOY TIG ROS Including but not limited to WELING & FINISHING HNY PKS Including but not limited to 128 ZZO STINLESS & LUMINIUM SLES

131 GS EQUIPMENT GS KITS Including but not limited to ISPOSLE GS OTTLES Including but not limited to REGULTORS & RRESTORS Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 129

132 GS EQUIPMENT UTTING & GOUGING NOZZLES Including but not limited to WELING & HETING TIPS Including but not limited to TTHMENTS & ESSORIES Including but not limited to WELING & FINISHING 130 ZZO STINLESS & LUMINIUM SLES

133 GS EQUIPMENT HOSES Including but not limited to HOSE FITTINGS Including but not limited to FLME UTTING MHINE SPRES Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 131

134 MNUL R R LE Including but not limited to R LE SETS & ELETROE HOLERS Including but not limited to ERTH LMPS Including but not limited to WELING & FINISHING 132 ZZO STINLESS & LUMINIUM SLES

135 MNUL R LE LUGS & ONNETORS Including but not limited to R ESSORIES Including but not limited to ELETROE RYING OVENS Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 133

136 MHINES Including but not limited to WELING & FINISHING 134 ZZO STINLESS & LUMINIUM SLES

137 MHINES Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 135

138 MHINES Including but not limited to WELING & FINISHING MHINE PRTS & ESSORIES Including but not limited to 136 ZZO STINLESS & LUMINIUM SLES

139 HELMETS Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 137

140 HELMETS Including but not limited to MISELLNEOUS SFETY Including but not limited to WELING & FINISHING 138 ZZO STINLESS & LUMINIUM SLES

141 WELER S IS FLUXES & NTI SPTTER Including but not limited to PIKLING & SURFE TRETMENT HEMILS Including but not limited to WELER S TOOLS Including but not limited to WELING & FINISHING ZZO STINLESS & LUMINIUM SLES 139