North Dakota. South Dakota. Utah. Idaho. Colorado. Nevada. Washington

Transcription

1 Idaho Pacific Steel P.O. Box th Street North Nampa, ID (208) Fax (208) Boise Customers Call: (208) Pacific Steel & Recycling P.O. Box Highland Avenue E. Twin Falls, ID (208) Fax (208) Pacific Steel & Recycling th Street North Lewiston, ID (208) Fax (208) Pacific Steel & Recycling 00 Triangle Ponderay, ID (208) Fax (208) Pacific Steel 257 East Anderson Idaho Falls, ID (208) ID & WY Fax (208) Pacific Steel P.O. Box North Main Pocatello, ID (208) Fax (208) Pacific Steel P.O. Box 1570 Hayden, ID Aqua Circle Dalton Gardens, ID (208) Pacific Steel & Recycling 5120 Emerald St. Boise, ID (208) Fax (208) North Dakota Pacific Steel P.O. Box W. Front Street Williston, ND (701) (701) (855) South Dakota Pacific Steel and Recycling P.O. Box Biernbaum Road Rapid City, SD (605) Fax (605) Utah Pacific Steel P.O. Box West 900 South Salt Lake City, UT 844 (801) WY, UT, NV Fax (801) Colorado Pacific Steel & Recycling P.O. Box River Road Grand Junction, CO (970) Fax (970) Nevada Pacific Steel & Recycling P.O. Box East Idaho Street Elko, NV (775) Fax (775) Washington

2 Pacific Steel & Recycling P.O. Box North Ralph Spokane, WA (509) Fax (509) Pacific Steel P.O. Box North Oregon Avenue Pasco, WA (509) ID, OR, WA Fax (509) Pacific Steel & Recycling P.O. Box Butterfield Road Yakima, WA Fax (509) ID, MT, OR, WA Fax (509) Wyoming Pacific Steel & Recycling P.O. Box Hudson Street Mills, WY (307) Fax(307) Pacific Steel and Recycling P.O. Box Larch Street Gillette, WY (307) Fax (307) Pacific Steel and Recycling P.O. Box Elk Street Rock Springs, WY (307) WY Fax (307) Alberta, Canada Pacific Steel & Recycling Box Range Road #63NW Medicine Hat, AB Canada TIA 5P1 (403) Fax (403) OTHER NON-STOCKING LOCATIONS Pacific Recycling P.O. Box th Avenue North Billings, MT 591 (406) Fax (406) Pacific Steel & Recycling P.O. Box W. Griffin Drive Bozeman, MT (406) MT Fax (406) Pacific Recycling P.O. Box th Avenue North Great Falls, MT (406) Fax (406) Pacific Recycling P.O. Box N. Higbee Idaho Falls, ID (208) ID Fax (208) Pacific Recycling P.O. Box E. Comstock Avenue Nampa, ID (208) Fax (208) Pacific Recycling P.O. Box Highway 30 West Pocatello, ID (208) Fax (208) Pacific Steel & Recycling P.O. Box Highland Avenue E. Twin Falls, ID (208) Fax (208)

3 Pacific Recycling P.O. Box Latimer Missoula, MT (406) Fax (406) Pacific Recycling P.O. Box Gum Street Kennewick, WA (509) Fax (509) Pacific Recycling (Billings Shredder) 3385 Coulson Road Billings, MT 591 (406) Fax (406) Pacific Recycling th Avenue East Tacoma, WA (253) Fax (253) Pacific Auto Recycling P.O. Bo Osterloh Twin Falls, ID (208) Pacific Recycling/ Pacific Auto Recycling P.O. Box West Front Street Williston, ND (701) Pacific Recycling (Shredder) 190 NW Waste Site Drive Mayfield, ID (208) Fax (208) Pacific Recycling (Catalytic Converteres) P.O. Box rd Street NW Great Falls, MT (406) Fax (406) Pacific E-Recycling th Avenue North Nampa, ID (208) Fax (208)

4 INDEX ALLOY/WEAR PLATE & BARS ALUMINUM PRODUCTS ANGLES BAR... 3 STRUCTURAL BAR GRATING... 43, 44 BEAMS I BEAMS M BEAMS WIDE FLANGE BEAMS CHANNEL BAR CHANNEL CAR CHANNEL JR. CHANNEL SHIP CHANNEL STANDARD CHANNEL CULVERTS EXPANDED METAL FASTENERS FLATS... 1, 2 GRATE-X GRATING, SAFETY... 38, 39 GROUSER BAR GUIDES FORMING ROLLING SHEARING AND BURNING... 59, 60 TUBE CUTTING LIGHT GAUGE PIPE PIPE PIPE SPECIFICATIONS PLATE HOT ROLLED... 25, 26 FLOOR/DECK REBAR REMESH ROUNDS... 7, 8 SHEETS COLD ROLLED GALVANIZED HOT ROLLED... 21, 22 PAINT-READY SQUARES... 9 STAINLESS STEEL STRAPPING/BANDING SEALS TOOLS STRIP... 1 TABLES INCHES TO DECIMALS FRACTION, DECIMALS, METRIC EQUIV RULES RELATIVE TO THE CIRCLE, ETC TOOLS, POWER TOOL BOXES TRAILER PARTS TUBING PERFORATED GALVANIZED SQUARE TELESCOPIC STEEL RECTANGULAR... 11, 12 ROUND SQUARE...

5 HOT ROLLED STRIPS AND FLATS (Stock Lengths - 20 ) Size in Size in Inches Wt./Ft. Wt./20 Inches Wt./Ft. Wt./20 1/8 x /16 x /16 x /8 x 1/2 x /4 x

6 3/4 x 7/8 x HOT ROLLED STRIPS AND FLATS, cont. (Stock Lengths - 20 ) Size in Size in Inches Wt./Ft. Wt./20 Inches Wt./Ft. Wt./20 5/8 x x Other sizes are available. Please check with your local Pacific branch x x 2 x

7 1 2 x 1 2 x BAR ANGLES (Stock Lengths - 20 ) Size Wt./Ft. Wt./ x 3 4 x 1 x 1 x x x x x x x 2 x x 2 x 2 x x x x 2 x x x

8 STRUCTURAL ANGLES (Stock Lengths - 20 or 40 ) Size Wt./Ft. Wt./20 Wt./40 3 x 2 x x x x 3 x x x x 3 x x x x 3 x

9 STRUCTURAL ANGLES, cont. (Stock Lengths - 20 or 40 ) Size Wt./Ft. Wt./20 Wt./40 4 x x x 4 x x 3 x x x x 5 x x x x 4 x x 6 x

10 STRUCTURAL ANGLES, cont. (Stock Lengths - 20 or 40 ) Size Wt./Ft. Wt./20 Wt./40 7 x 4 x x 4 x x 6 x x 8 x Let us roll your angle into rings for you. Leg Out Specify inside diameter and, if unequal, which leg is out. Leg In Specify outside diameter and, if unequal, which leg is in. -6-

11 ROUNDS Description of Grades Comparison Chart of Average Mechanical Properties Guide to Selection Mild Steel, Hot Rolled Low carbon, general-purpose steel, providing economy, formability and weldability. ASTM A-36, Hot-Rolled Carbon Steel Bar Covers carbon steel shapes, plates and bars for general construction. Suitable for forming and welding. C-18 Cold-Drawn Low carbon, good case-hardening properties. Excellent steel for bending, cold-forming and shafting applications. Good brazing and welding properties. LaSalle Stressproof Cold-Drawn Excellent wearability, strength, machinability and tool-life. Minimum warpage and distortion, resists fatigue and stress without heat treating. Exceptional quality for production maintenance or special machine parts. Difficult to weld Heat Treated, Stress Relieved A general purpose alloy, high in chromium and molybdenum. Has good hardness, penetration, strength, toughness and durability. Use is common in all well tool joints, axle shafts and many other applications that require a metal that will withstand extreme stress and fatigue. Difficult to weld, but can be welded by any common welding process if proper welding rod is used, and if material is preheated prior to welding. Joint area should be stress relieved after welding. Sizes through 3 are cold drawn, and larger are hot rolled. Tensile Yield Strength Strength Brinnel Color PSI PSI Hardness Rating*** S.F.M.** Weldability Code A-36 58,000 36,000 Approx. Good Hot-rolled 126 brazing &welding properties C-18 82,000 70, % 125 Good brazing Green & welding properties C-45 91,000 77, % 95 Fair Cold-rolled brazing Blue & welding properties LaSalle Stressproof* 125,000 0, % 83 Difficult to Bronze Cold-drawn weld Hot rolled % heat treated * * * & --- Difficult to Light stress relieved Less weld Blue Cold drawn % heat treated * * * & --- Difficult to White stress relieved Less weld -7-

12 HOT & COLD DRAWN ROUNDS Size in Wt. Per Size in Wt. Per Inches Ft. in Lbs. Inches Ft. in Lbs

13 HOT ROLLED & COLD DRAWN SQUARES Size in Wt. Cold Rolled Hot Rolled Inches Per Ft. Wt., 12 Bar Wt./20 Bar Let us cut the pieces you need. -9-

14 Size Gauge ga ga ga ga. SQUARE TUBING Wall Thickness ga ga ga. 1 2 x x x x x x x x x x x x x 5 6 x 6 7 x 7 8 x 8 x 12 x Weights per ft. may vary according to our source..134 ga ga / Mech. Sizes ASTM - A513 Struct. Sizes ASTM - A500B ga / / / /

15 Size Gauge ga ga ga ga. RECTANGULAR TUBING Wall Thickness.9 12 ga ga..134 ga. 1 x x 1 2 x 1 2 x x x 1 3 x x 2 4 x 2 4 x 3 5 x 2 5 x 3 6 x 2 6 x 3 6 x 4 7 x 4 7 x Weights per ft. may vary according to our source / Mech. Sizes ASTM - A513 Struct. Sizes ASTM - A500B.250 1/ / / /

16 Size Gauge ga ga ga. 8 x 2 8 x 4 8 x 6 9 x 4 9 x 6 x 2 x 4 x 6 12 x 2 12 x 4 12 x 6 Approximate weight per foot. Weights may vary according to source. RECTANGULAR TUBING Wall Thickness ga ga ga..134 ga / Mech. Sizes ASTM - A513 Struct. Sizes ASTM - A500B.250 1/ / / /

17 ROUND MECHANICAL TUBING ASTM - A513 Size Gauge ga ga ga. Wall Thickness ga ga ga ga ga..134 ga ga. 1 2 OD Approximate weight per foot. Weights may vary according to source. -13-

18 A-53 Sizes Std. xtra strg. Dbl. xtra strg. A-6 Sizes 2-14 Nom. ANSI B 36 wall thicknesses Black and galvanized welded and seamless pipe suitable for welding and forming operations. CW not intended for flanging. Grade B not intended for close coiling or severe cold deforming. When close coiling required this should be stated on the order. Smls. for high temperature service. Pipe ordered under this specification shall be suitable for bending, flanging and similar forming operations. PIPE SPECIFICATIONS CW Type F ERW Type E Seamless Type S CW Type F Types E & S Grades A or B % Max C Mn P S Type F Type E & S Grade A Grade B Ladle & Check Limits Seamless only Grades A, B or C % Max % Min C Mn P S SI Grade A Grade B Grade C Ladle & Check Limits Min. PSI Yield Tensile Type F Grade A Grade B Min. PSI Yield Tensile Grade A Grade B

19 PIPE A53 Grd. A & B Black Sch 40 and Sch 80 Plain End Black Sch 40 Threaded and Coupled Galv Sch 40 Threaded and Coupled Nominal Outside Wall Inside Pipe Size Diameter I.P.S. Thickness Diameter Wt./Ft. Inches Inches Schedule Inches Inches Lbs Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy

20 Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy. Std. X-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy XX-Hvy Nominal Outside Wall Inside Pipe Size Diameter I.P.S. Thickness Diameter Wt./Ft. Inches Inches Schedule Inches Inches Lbs. PIPE, cont.

21 XX-Hvy. XX-Hvy. Std. Std. X-Hvy Std. 40 X-Hvy X-Hvy Std. 30 X-Hvy Nominal Outside Wall Inside Pipe Size Diameter I.P.S. Thickness Diameter Wt./Ft. Inches Inches Schedule Inches Inches Lbs. PIPE, cont.

22 Std. X-Hvy. Std. Std. Std. X-Hvy. Std X-Hvy Nominal Outside Wall Inside Pipe Size Diameter I.P.S. Thickness Diameter Wt./Ft. Inches Inches Schedule Inches Inches Lbs. PIPE, cont.

23 X-Hvy. X-Hvy. PIPE, cont. Nominal Outside Wall Inside Pipe Size Diameter I.P.S. Thickness Diameter Wt./Ft. Inches Inches Schedule Inches Inches Lbs Std PERFORATED GALVANIZED SQUARE TELESCOPIC STEEL TUBING Nominal Wt./Ft. Tube Size Lbs. Pcs./Bundle sq. x 14 ga. 2 sq. x 14 ga sq. x 12 ga sq. x 12 ga. 2 sq. x 12 ga sq. x 12 ga sq. x 12 ga

24 LIGHT GAUGE PIPE American Water Works Assoc. Specs. AWWA C-200 Equivalent to ASTM A-135 Grade A Wall Weight *Weight OD Thickness Per Foot Per 40 Length 4 x 5 x 6 x x 8 x x 12 x 14 x 16 x 14 ga ga ga ga ga ga ga ga ga Larger diameters are available, as well as a variety of end finishes and coatings *Weight may vary slightly

25 SHEETS Hot Rolled Sheets, ASTM A569 A low cost commercial quality sheet having a maximum carbon of 0.15 percent. This material is intended for applications where bending, moderate forming or drawing, and welding may be involved. Cold Rolled Sheets, ASTM A366 A commercial quality sheet supplied in lighter gauges than available in hot rolled sheets. (lighter than 16 ga.). The additional mill processes result in a more controlled thickness, finish, and mechanical properties than hot rolled sheets. The matted finish proves an excellent base for painting operations. Galvanized Sheets, ASTM A653 Commercial quality sheet is zinc coated in a continuous hot dipped process to produce a low cost corrosion resistant steel. The coating will not peel or flake in most forming operations. Paint-Ready, Electrolytic Zinc-Coated Steel Sheets Commercial quality sheets which have been electrolytically plated with zinc and other phosphate coating for better paint adherence. The coating will not peel or flake in most forming operations. HOT ROLLED SHEETS Width Est. Wt./ Gauge & Length Sheet, Lbs. 16 ga. - (.0598 ) 2.5 lbs. per sq. ft. 48 x x x x ga. - (.0747 ) lbs. per sq. ft x x x x x ga. - (.46 ) lbs. per sq. ft x x x x Width Est. Wt./ Gauge & Length Sheet, Lbs. 12 ga. 60 x x x x x ga. - (.1196 ) 5.0 lbs. per sq. ft. 48 x x x x x x x ga. - (.1345 ) lbs. per sq. ft x x x x

26 HOT ROLLED SHEETS, cont. Width Est. Wt./ Gauge & Length Sheet, Lbs. Width Est. Wt./ Gauge & Length Sheet, Lbs. ga. 60 x x x x ga. - (.1793 ) 7.5 lbs. per sq. ft. 48 x x x x x x x x x COLD ROLLED SHEETS Width Est. Wt. Gauge Lbs./Sq. Ft. & Length Per Sheet 24 ga. (.0239 ) x ga. (.0299 ) x ga. (.0359 ) x ga. (.0478 ) x PAINT-READY ELECTROLYTIC ZINC-COATED SHEETS Width Est. Gauge Lbs./Sq. Ft. & Length Lbs./Sheet 24 ga x ga x ga x ga x

27 GALVANIZED SHEETS Gauge Lbs./Sq. Ft. Width & Length Est. Lbs./Sheet 30 ga x x ga x x ga x x x ga x x x ga x x x ga x x x ga x x ga x x ga x x x ga x x x ga x x x

28 PLATES ASTM A-36 A structural quality carbon steel produced to a minimum yield of 36,000 psi. Used for general construction purposes, and provides good weldability. ASTM A-514 (T-1 type) A structural quality alloy steel which has been heat treated by conventional liquid quenching and tempering to a high strength. The high strength permits reduction in gross design weight because smaller cross sections can be specified. Abrasion-Resistant, AR Intended for applications where the contact of a material causes wear on the surface of another material. Abrasionresistant steels are not intended for structural applications. The high hardness of this steel causes it to be brittle, and fractures can occur in structural applications. Stock In AR as rolled AR 360 Brinell Hardness 200 to min. Floor Plate (Deck Plate) A steel plate rolled with a raised lug pattern to provide sure footing and positive traction in every direction. The pattern permits easy cleaning with water or brooms. Good weldability. Plate Processing Services: Shearing Flame cutting Forming Punching Rolling -24-

29 PLATES Stock Lengths - 96, 120, 144, 240 (Subject to Plate Thickness and Width) We can shear or burn plate to your requirements. Width Weight Weight Per Thickness in Inches Per Sq. Ft. Ft., Lbs x 48 x 60 x 72 x 84 x x 48 x 60 x 72 x 84 x x 48 x 60 x 72 x x 48 x 60 x 72 x 84 x x 48 x x 48 x 60 x 72 x 84 x x 48 x x 48 x 60 x 72 x x 48 x 60 x 72 x 84 x x 48 x

30 1 PLATES, cont. Stock Lengths - 96, 120, 144, 240 (Subject to Plate Thickness and Width) We can shear or burn plate to your requirements. Width Weight Weight Per Thickness in Inches Per Sq. Ft. Ft., Lbs x 48 x 60 x 72 x 84 x 96 x 96 x 48 x 96 x 96 x 48 x 60 x 72 x 96 x 96 x 96 x 48 x 60 x 72 x

31 FLOOR/DECK PLATES Stock Lengths - 96, 120, 144, 240 (Subject to Plate Thickness and Width) We can shear or burn floor plate to your requirements. Width Weight Weight Per Thickness in Inches Per Sq. Ft. Ft., Lbs. 16 ga. x ga. 12 ga x 48 x 60 x 48 x 60 x 48 x 60 x 72 x 48 x 60 x 72 x 96 x 48 x 60 x 72 x 96 x 48 x 60 x 72 x 48 x 60 x 72 x 96 x 48 x 60 x 72 x Let us shear, flame cut, form, punch, or roll your plate. -27-

32 C 3 x STANDARD CHANNEL (Stock Lengths - 20 and/or 40 ) Designation: Web Depth/Inches Depth Flange Thickness x Wt./Ft. in Inches Width in Inches C 4 x C 5 x C 6 x C 7 x C 8 x C 9 x C x C 12 x C 15 x

33 3 4 x 3 8 x x 3 8 x x 1 2 x x 1 2 x x 1 2 x x 9 16 x BAR CHANNELS (Stock Lengths - 20 ) Size* Wt. Per Est. Wt. Size* Wt. Per Est. Wt. in Inches Ft. (Lbs.) 20 Bar in Inches Ft. (Lbs.) 20 Bar x 1 2 x x 9 16 x x 5 8 x x 1 x x 1 x x 5 8 x *1st number refers to depth; 2nd number, flange width; 3rd number, web thickness. Not all sizes are stock items. Please inquire. JUNIOR CHANNELS Designation: Web Depth/Inches Depth Flange Average Thickness x Wt./Ft. in Inches Width Thickness in Inch MC 8 x 8.5 MC x MC 12 x

34 MC 3 x SHIP AND CAR CHANNELS (Stock Lengths - 20 and/or 40 ) Designation: Web Depth/Inches Depth Flange Average Thickness x Wt./Ft. in Inches Width Thickness in Inch MC 4 x MC 6 x MC 7 x MC 8 x MC 9 x MC x MC 12 x MC 13 x MC 18 x Let us cut the size you need. -30-

35 WIDE FLANGE BEAMS (W BEAMS) Designation Flange in Inches Nom. Depth/In. Depth Web Thickness x Wt./Ft. in Inches Width Thickness in Inches W 4 x W 5 x W 6 x W 8 x W x

36 WIDE FLANGE BEAMS (W BEAMS), cont. Designation Flange in Inches Nom. Depth/In. Depth Web Thickness x Wt./Ft. in Inches Width Thickness in Inches W 12 x W 14 x W 16 x

37 WIDE FLANGE BEAMS (W BEAMS), cont. Designation Flange in Inches Nom. Depth/In. Depth Web Thickness x Wt./Ft. in Inches Width Thickness in Inches W 16 x W 18 x W 21 x W 24 x

38 S 3 x I BEAMS (S BEAMS) Designation Flange in Inches Nom. Depth/In. Depth Web Thickness x Wt./Ft. in Inches Width Thickness in Inches S 4 x S 5 x S 6 x S 7 x S 8 x S x S 12 x S 15 x S 18 x S 20 x S 24 x

39 M BEAMS (JR., H, OR LIGHT BEAMS) Designation Flange in Inches Nom. Depth/In. Formerly Depth Web Thickness x Wt./Ft. Called in Inches Width Thickness in Inches M 4 x 13 H Beam M 5 x 18.9 H Beam M 6 x Jr. Beam H Beam H Beam M 8 x 6.5 Jr. Beam M x 9.0 Jr. Beam REINFORCING BARS (REBAR) Available in ASTM A615 Grade 40 and Grade 60. A706 weldable is also available. Grade 40 Grade 60 Tensile Strength (PSI) 70,000 min. 90,000 min. Yield Strength (PSI) 40,000 min. 60,000 min. Bar Size Metric Weight Diameter Description Sizes Lbs./Ft. in Inches #3 #4 #5 #6 #7 #8 #9 # #11 #14 # Rebar forming available at some locations. -35-

40 Manganal Grouser Bars No. A B C Grouser Bars ( Ft. Lengths) No. A B C ALLOY/WEAR PLATE & BARS Hardness 340/360 BHN heat treated for high hardness, high tensile strength to resist severe abuse and abrasion For use in severe wear applications Bars Size C 1 4 x x x x x A B Ore car bottoms and liners Sand and gravel chutes Dipper and bucket liners Conveyor buckets and flights Coal washers Wt. Per Random Foot (Lbs.) Length (Ft.) Thickness Alloy Plate Approx. Wt. Per Sq. Ft Stock dimensions 4 ft. x 8, 12, 24 ft. 6 ft. x 8, 12, 24 ft. 7 ft. x 12, 24 ft. Heat treated to higher hardness for more severe abrasion applications. Sizing grates and grizzlies Quarry chutes Bulldozer mold boards Front end loader liners Sand and grit blast cabinets Weldable - use low hydrogen electrodes Formable - Best bending across grain of plate Uniform hardness Physical properties Hardness 340/360 brinell Tensile strength 165,000 PSI Hardness 400 BHN minimum 1 2 x 72 x x 72 x x 72 x x 72 x 144

41 WELDED REINFORCED MESH (REMESH) Conforms to ASTM A-185 Wire fabric is made from cold drawn steel wires welded at every intersection for maximum strength and rigidity. It is furnished in rolls in the various gauges and spacings shown in the tables below. Other spacings and gauges are furnished for special requirements. The minimum tensile strength is 75,000 psi for two way reinforcement. Rolls Section Areas Spacing of Wires Gauge of Per Foot of Width Approx. Weight in Inches Wires Long. Trans. Per 0 Sq. Ft. Long. Trans. Long. Trans. Sq. In. Sq. In. in Lbs. 6 x x x x x x Panels Section Areas Spacing of Wires Gauge of Per Foot of Width Approx. Weight in Inches Wires Long. Trans. Per 0 Sq. Ft. Long. Trans. Long. Trans. Sq. In. Sq. In. in Lbs. 6 x x x x x x x We also stock anchor bolts, tie wire and form ties at some locations. -37-

42 You re on Safe Ground With Safety Grating Features Multi-directional slip resistance Meets federal specifications for slip resistance Slip resistance listed by Underwriters Lab., Inc. One-piece construction Rugged durability Unique resilient surface Variety of metals and sizes Light weight High strength-to-weight ratio Self framing Long span Minimum deflection Simple and economical installation Easy maintenance -38-

43 SAFETY IN HIGH PLACES The closely spaced matrix of safety grating gives workmen a definite visual reference contact as well as sure footing. Ice, sleet, snow and mud can add hazards to exterior applications. But safety grating provides safeguards under all conditions. SAFETY IN ALL PLACES Wherever they are, workmen need a secure footing to do an efficient, productive job. Production is slowed when workers must walk with caution because of unsure footing. The surface of safety grating, designed for safety, quickly earns the confidence of workmen because it provides slip resistance in all directions. Virtually self-cleaning, it is resilient and makes every step a safe step - whether in high places or low! Design specifications and sizes available on request at your local pacific branch! -39-

44 EXPANDED METAL Expanded metal is a sheet metal that has been slit and expanded to form a diamond shape pattern. While the sheet may be expanded up to ten times its original width and lose up to 80% of its weight, the expanded metal sheet is stronger and more rigid than the original sheet. Expanded metal is available in a regular (raised) pattern, and a flattened pattern. This material is suitable for a vast number of applications where protection, reinforcement, greater strength with less weight, free passage of air and light, and a decorative or ornamental effect are required. Stocked in carbon steel; also available in aluminum, stainless steel and galvanized. Standard (Raised) Flattened Stock sizes - 48 x 96 Other widths and lengths are available; please inquire. -40-

45 STANDARD (RAISED) EXPANDED METAL Width & Thickness Lbs. Lbs. * Style Length of Strand Per Per Designation (Inches) (Inches) Sq. Ft. Sheet # # # # # # # # # # # # FLATTENED EXPANDED METAL Width & Thickness Lbs. Lbs. * Style Length of Strand Per Per Designation (Inches) (Inches) Sq. Ft. Sheet # # # # # # # # # # #

46 EXPANDED METAL GRATING Grate-X grating is a heavy-duty expanded metal produced from carbon steel sheet and plate. It is structurally stronger than the original plate, yet lightweight. Grate-X is an excellent slip-resistant, low-cost, open flooring. Expanded metal grating is available in two patterns: grated with the diamonds running the length of the sheet, and walkway (catwalk) with the diamonds running the width of the sheet. Stock sizes - 48 x 96 Other widths and lengths are available. Please inquire. 3.0 lb lb. 4.0 lb lb. 5.0 lb lb. 7.0 lb. GRATING CHART * Style Width & Thickness Lbs. Lbs. Designation Length of Strand Per Per (Lbs. Per Sq. Ft.) (Inches) (Inches) Sq. Ft. Sheet Metal Lathe 2.5 lb lb. 27 x x 96 Lbs. Per Sq. Yard

47 BAR GRATING Conforms to specifications RR-G-661 and MIL-G-1958 th id th id W W Spa n Span Smooth Surface Grating Serrated Grating Grating available in carbon steel, aluminum & stainless Other sizes cut to your specifications When ordering grating, specify: 1. Type of grating 2. Size of bearing bars (depth & width) 3. Span (direction of bearing bars) 4. Dimensions of area 5. Painted or galvanized, smooth or serrated. When ordering stair treads, also specify: 1. Width & length 2. Type of nosing (checker plate or cast abrasive). Stair Treads h t ng Le Stair treads are available in many of the grating materials available from Pacific Steel. Some types and sizes are in stock, while others can be quickly fabricated to order. -43-

48 BAR GRATING Weight in Pound Per Sq. Ft. Bearing Cross Type Type Bars Bars 19-W-4 19-W x x x x x x x x x x x x C. to C. of bearing bars o C. to C. of cross bars TYPE 19-W-4 (standard) 2 C. to C. of cross bars Weight in Pound Per Sq. Ft. Bearing Cross Type Type Bars Bars 15-W-4 15-W x x x x x x x x x x x x C. to C. of bearing bars TYPE 19-W-2 (standard with close cross bars) C. to C. of bearing bars C. to C. of bearing bars 4 o C. to C. of cross bars TYPE 15-W-4 (close space) TYPE 15-W-2 (close space with close cross bars) 2 C. to C. of cross bars When ordering, always specify: 1. Size of bars and type - standard or special. 2. Whether to be painted or galvanized. 3. Complete dimensions of area to be covered. 4. Direction bearing bars are to run. 5. Material - such as steel, aluminum, etc. -44-

49 1 8 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 6 ALUMINUM PRODUCTS The following size and weight charts are for some of our more popular items. Please check with your local service center for size and alloy availability. Flat 6061 Size Wt./Ft. Size Wt./Ft x x x x x x x x x x x x x x x x x x x x x x 8 1 x x x 2 1 x x 3 1 x 4 1 x 6 1 x

50 ALUMINUM PRODUCTS Channel 6061 Size 1 x 1 2 x x 1 x x x x x x.200 Wt./Ft Diamond Tread 3003 Size Wt./Sq. Ft

51 ALUMINUM PRODUCTS Angle 6061 Size 3 4 x 3 4 x x 1 x x 1 x x 1 x x x x x x x x x x x x x x 2 x x 2 x x 2 x x x x x x 2 x x 3 x x 3 x x 4 x 1 4 Wt./Ft Rounds 6061 Size Wt./Ft

52 ALUMINUM PRODUCTS Square 6061 Size Wt./Sq. Ft Size OD Wall Wt./Ft Pipe (sch 40) Tube 6063 Size Square 3 4 x 3 4 x x 1 x x 1 x x x x x x x x 2 x x 2 x x 2 x.250 Rectangular 1 x x x 2 x x 2 x x 3 x.125 Wt./ft

53 ALUMINUM PRODUCTS Sheet & Plate 5052 Size Wt./Ft STAINLESS STEEL The following size and weight charts are for some of our more popular items. Please check with your local service center for availability, and additional size and alloy information. All stainless items stocked are type 304. Size 24 ga. 22 ga. 20 ga. 18 ga. 16 ga. 14 ga. 12 ga. 11 ga. ga. 3/16 1/4 Sheet & Plate Wt./Sq. Ft

54 STAINLESS STEEL Angle Size 3 4 x 3 4 x x 1 x x 1 x x 1 x x x x x x x x x x x x x x 2 x x 2 x x 2 x x x x 3 x x x 1 4 Wt./Ft Round Size Wt./Ft

55 STAINLESS STEEL Flat Size 1 8 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 4 Wt./Ft

56 STRAPPING/BANDING Approx. Footage Winding Type Width Thickness Strength Yield M-Mill in Inches in Inches Lbs. Ft./Lb. R-Ribbon Regular Duty ,180 1,340 1,130 1,470 1,670 1,360 1,760 2,0 2, M M M M M M M M M M M M Super Regular Duty ,305 1,530 1,630 1,900 1,960 2, M M M M M M M High Tensile ,450 1,660 1,830 2,0 2,0 2,690 3,250 5,500 7,700 12,300 2,470 4,650 5, ,305 1,630 1, M M M M M M/R M/R R R R M R R M M M M Polyester and polypropylene strapping are also available.

57 SEALS Types of Seals Available Open Seals (Snap-On Type) are put over the overlapping strapping ends during or after tensioning. They are easily applied and available in standard and special lengths. Closed Seals (Sleeve Type) are pre-threaded over the overlapping strapping ends before the tensioning tool is applied. Preferably used on bundles or narrow operating surfaces. Semi-Open Seals have one open and one closed leg. They are used with heavyduty strapping. The closed leg is hooked over the strap ends and snapped down into position. Overlap Seals (Push Type) are pre-threaded and used when strap is tensioned by butting the nose of the push-type tensioner against the seal. The overlap legs provide extra strength where needed. Magazine Feed-Seals come in stacks for use in manual and power combination tools and for automatic powerstrapping machines. The wire holding the stack is easily removed after the seals are loaded into the magazine. -53-

58 Order by form number with complete dimensions TOOLS Sealers Tensioners Dispensers Cutters A full line of automatic, semi-automatic, and hand held trapping machines are available. -54-

59 Steel Culvert 16 or 18 gauge galvanized steel construction. Annular or helical corrugation. 12 to 72 diameters. Larger sizes available on special order. Poly Culvert Easy to lift and handle without a tractor. Withstands corrosive environment. Easy to cut on-site; easy to install. Single-wall available in 4, 6, and 8 diameters. Double-wall available in 6 to 48 diameters. -55-

60 ORNAMENTAL IRON Hundreds of styles to choose from JOB SITE AND TRUCK STORAGE CABINETS Chests and Cabinets 2.3 cu. ft. to 50 cu. ft. Steel and Aluminum Boxes and Chests for pickups and flatbed trucks. -56-

61 FASTENERS Grades 5 & 8 Lag bolts Machine bolts, nuts, washers Carriage bolts to 1 diameter, 6 length TRAILER PARTS Hitches Axle assemblies (1,500 to,000 lb. cap.) Couplers Lighting kits Hubs Brakes and brake parts Jacks U-Bolts -57-