Auto Stand Trailer Stabilizing Jacks Heavy gauge steel construction

Size: px

Start display at page:

Download "Auto Stand Trailer Stabilizing Jacks Heavy gauge steel construction"

Charles Sims
5 years ago
Views:

Auto Stand Trailer Stabilizing Jacks Heavy gauge steel construction Large base pad (17" x 18 1/2") Gas activated, self levelling system 10" dia. semi-pneumatic rubber tires for easy handling 41"-50.

KH791 Trailer Stabilizing Jacks Keeps tractorless trailers leveled while being loaded or unloaded Prevents accidents if wheel support collapses Stabilizes vehicle against load shifts Lowered height:

1 Auto Stand Trailer Stabilizing Jacks Heavy gauge steel construction Large base pad (17" x 18 1/2") Gas activated, self levelling system 10" dia. semi-pneumatic rubber tires for easy handling 41"-50.5" height range Large trailer contact pad Capacity: lbs. Only one required per trailer Model No. KH791 Trailer Stabilizing Jacks Keeps tractorless trailers leveled while being loaded or unloaded Prevents accidents if wheel support collapses Stabilizes vehicle against load shifts Lowered height: 39 1/2" Raised height: 51" Removeable 37 1/2" positioning and ratcheting handle 8" dia support pad 8" wheels lbs. supporting capacity each and lbs lifting capacity 1 year warranty Recommended use in pairs Model No. KH777 Auto Stand Plus Heavy gauge steel construction Gas activated, self-levelling system Ergonomic lever action to safely pin, removing the need to bend over 16" dia. semi-pneumatic wheels allow for easy outdoor manoeuvring Large base pad: 17" x 18 1/2" Large trailer contact pad Capacity: lbs. Only one required per trailer Model No. ML786 Saf-T-Lok Bars Designed for economy and ease of operation Constructed with high strength industrial round tubing Easy to close and lock with its heavy-duty steel rack, handle and cast aluminum housing Replaceable molded pivoting rubber feet, 2" x 4" that grip firmly to trailer walls Easy to open trigger release Adjusts from 90" to 105" Optional cargo hoop set, two hoops, which bolts quickly and easily to provide greater area of holding surfaces (installation hardware included) Available in either steel or aluminum versions Extra long steel version is available upon request KH574 KH575 Aluminum Decking/Shoring Beams For 96" and 102" trailers Made from extruded high strength aluminum Designed to give maximum strength at the least possible weight Keyhole slot allows the beams to be hung and stored in the trailer out of the way when they are not in use Decking/Vertical Rating: 2000 lbs. uniformly distributed working load limit Head assemblies are all steel, zinc-plated and tapered for ease of operation Shoring/Horizontal Rating: 2000 lbs. uniformly distributed working load limit Comes standard with Kinedyne 's patented "Kwik Latch" beam head release mechanism, for safe and quick beam deployment Note: Working load limits are 1/3 of the ultimate breaking strength. Model No. ND360 Mfg. No. FE Logistic Tracks SERIES E TRACK horizontal : High strength 12-gauge steel Minimum Yield: PSI Finished: Galvanized Weight: 16.2 lb. Length: 10 ft. Model No. ND359 Mfg. No Model Mfg. Wt. Price No. No. Description lbs. /Each ND Steel Saf-T-Lok Bar 11.4 KH Aluminum Saf-T-Lok Bar 17 KH Cargo Hoop Set 15 Warning: Welding galvanized material may form toxic fumes. Welding should be done with adequate ventilation. Extruded Rubber Dock Fenders D-4 Dock Fenders Guard against damaging impact Made of age, weather and abrasion-resistant synthetic rubber Easy to install and the trim appearance makes them well suited for use on trucks and truck docks Half oval shape allows radius to widen upon impact creating better deflection Easily installed manually or by power tools Hardware is concealed when installation is complete Note: All given dimensions are nominal and may vary an average of 5% in manufacturing process /4" 1 1/2" 3/4" 3/4" 2" 4 1/2" Diagonal Horizontal Vertical Mounting D-4 Dock Fenders On Wood: Use 1/2" Lag Screws On Concrete: Use 1/2" Self-Drilling Fasteners On Steel: Weld 1/2" Studs on Centers as Required In all cases, a drilled metal bar 3/16" x 1 1/2" should be inserted in the bore of the fender to act as a continuous washer. Mounting Bar Mounting Bar Fender Drilled Drilled Dimensions Anchor Approx. Model Price Model Price W" x H" x L" Holes Wt. lbs. No. /Each No. /Each 4 1/2 x 3 3/4 x 12 2 req., 6" * 4 KH658 KH /2 x 3 3/4 x 18 2 req., 12" * 6 KH659 KH /2 x 3 3/4 x 24 2 req., 18" * 9 KH660 KH /2 x 3 3/4 x 36 3 req., 15" * 11 KH661 KH665 * Between holes shipping &

Steel-Faced Laminated Rubber Dock Bumpers One of the strongest forms of loading dock protection Used in docking areas where excessive friction from up and down movement occurs, air-ride trailers,

3/8" thick, heavy duty, high carbon, "floating" steel face plate withstands abrasive friction of air-ride trailers Enclosed design prolongs rubber life 3-year warranty Laminated Rubber Dock Bumpers

rubber laminates are manufactured from reclaimed truck tires Manufactured under pressure exceeding 1500 lbs. to absorb over 80% of the impact 1-year warranty No. A" B" C" D" lbs.

KH714 6 12 24 7 105 KH715 6 12 36 7 166 KH716 6 20 11 7 1/2 83 KH717 6 24 11 9 1/2 100 Selecting the Proper Size of Dock Bumper Laminated or Steel-Faced Laminated or Steel-Faced No. A" B" C" D" lbs.

KH729 6 10 12 5 29 KH730 6 12 12 7 34 KH731 6 12 14 7 39 KH732 6 12 18 7 50 KH733 6 12 24 7 72 KH734 6 12 36 7 105 KH735 6 20 11 7 1/2 53 KH736 6 24 11 9 1/2 64 9" Projection KH739 9 12 12 7 75

2 Steel-Faced Laminated Rubber Dock Bumpers One of the strongest forms of loading dock protection Used in docking areas where excessive friction from up and down movement occurs, air-ride trailers, yard jockeys, etc. 3/8" thick, heavy duty, high carbon, "floating" steel face plate withstands abrasive friction of air-ride trailers Enclosed design prolongs rubber life 3-year warranty Laminated Rubber Dock Bumpers Unlimited applications in factories, warehouses and docks Ideal for projecting above low docks, rub rails against walls, marine dock protection Greater longevity of bumpers is achieved because rubber laminates are manufactured from reclaimed truck tires Manufactured under pressure exceeding 1500 lbs. to absorb over 80% of the impact 1-year warranty No. A" B" C" D" lbs. /Each 4" Projection KH KH KH KH KH /2 75 KH /2 90 6" Projection KH KH KH KH KH /2 83 KH /2 100 Selecting the Proper Size of Dock Bumper Laminated or Steel-Faced Laminated or Steel-Faced No. A" B" C" D" lbs. /Each 4" Projection KH KH KH KH KH KH KH /2 46 KH /2 56 6" Projection KH KH KH KH KH KH KH /2 53 KH /2 64 9" Projection KH KH KH KH KH KH /2 105 KH /2 124 See pages 1448 to 1457 for trailer supplies Molded Dock Bumpers Protects building and dock areas Shockproof, tear and freeze resistant KH005 Model Face size Overall Wt. Price No. Type W" x H" Projection" lbs. /Each KH005 Rectangular 13 x KH009 Rectangular 18 x Shipping & 213

Aluminum twin Ramps with Perforated Traction Grip Provides a fast, safe means of moving vans, pickup trucks and some cars from ground level into and out of building docks.

pins are included to secure ramps to dock or truck Priced per Pair Inside Model Cap. Max." Min." O.A. Curb Wt. Price No. lbs. 11 Incline Width " Width" Length' lbs.

18 170 KH274 5500 46 32 1/2 20 15 20 190 KH275 5500 55 1/2 39 20 15 24 250 All prices F.O.B. Weston, Ontario. Hook Mount and Non-Skid treadplate surface also available.

3 Aluminum twin Ramps with Perforated Traction Grip Provides a fast, safe means of moving vans, pickup trucks and some cars from ground level into and out of building docks. Perforated traction grip deck ensures safe, non-slip use in both wet or dry conditions. 1 1/2" side curbs. Choose the ramp length that will accommodate your truck or van at a gradual slope. pins are included to secure ramps to dock or truck Priced per Pair Inside Model Cap. Max." Min." O.A. Curb Wt. Price No. lbs. 11 Incline Width " Width" Length' lbs. /Each KH /2 12 1/ KH / KH KH / KH /2 25 1/ KH KH / KH / All prices F.O.B. Weston, Ontario. Hook Mount and Non-Skid treadplate surface also available. All products are non-returnable Aluminum Walk Ramps with Perforated Traction Grip Ideal for use with hand trucks and platform trucks. Lightweight, portable aluminum walkramps provide a fast, easy means of loading and unloading. Perforated Traction Grip Deck ensures safe, non-slip use in both wet and dry conditions. Determine the length of ramp which will descend at a gradual, safe slope. pins are included to secure walkramp to truck or dock. Not for use with pallet trucks or fork lifts. APRON mount models Inside Model Cap. Max." Min." O.A. Curb Wt. Price No. lbs. 20 Incline 8 Width " Width" Length' lbs. /Each KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / KH / All prices F.O.B. Weston, Ontario. Hook Mount and Non-Skid treadplate surface also available. All products are made to order and are non-returnable Edge-Of-Dock Levellers Attaches easily to edge of dock. Self contained, no pit required. Provides access to trucks 5" higher or lower than dock height. Fast, spring assisted one man operation, automatically returns to stored position when truck pulls away. free. Supplied with two 10" x 13" x 14" moulded rubber bumpers and steel bumper mounting blocks. 27 3/4" span with 15" lip gives 12 3/4" of usable lip projection beyond bumpers lb. capacity. Note: Lag plate required if no "C" channel is cast into edge of dock wall. Model Deck Overall Wt. Price No. Span" Width" Width" lbs. /Each KH / KH / F.O.B. Guelph, Ontario Optional Model Price No. Description /Each KH385 1/4" x 12" x 96" top lag plate KH384 1/4" x 12" x 102" top lag plate All products are made to order and non-returnable. Hook mount and non-skid treadplate surface also available. Truck Slider Ramps Inquire about our line of Below-Truck Aluminum Slider Ramps. Available with or without steel ramp carrier. Steel Carrier Lightweight Aluminum Slider 214 shipping &

4 Aluminum Dockplates Skid resistant safety tread deck. Bevelled edges allow smooth access from either end. Bend at upper end permits both ends of plate to lie flat. Steel legs fit between dock and truck; prevent movement when in use. High tensile aluminum alloy construction; no welds to break. HOW to order: 1. Select dockplate width: add 12" to width of equipment to be used on dockplate. 2. Determine height differential: (the vertical distance from dock floor to truck floor) The height differential decides the necessary plate length. 3. Select the necessary capacity. Above Dock Level Below Dock Level Light Duty - 1/4" ga. Regular Duty - 3/8" ga. Heavy Duty - 1/2" ga. Extra Heavy Duty - 5/8" ga. Size Model Cap. Wt. Price Model Cap. Wt. Price Model Cap. Wt. Price Model Cap. Wt. Price W" x L" Diff." No. lbs. lbs. /Each No. lbs. lbs. /Each No. lbs. lbs. /Each No. lbs. lbs. /Each 36 x 48 7 KH KH KH x 48 7 KH KH KH x 24 3 KH KH x 30 4 KH KH x 36 5 KH KH KH x 42 6 KH KH KH x 48 7 KH KH KH x 54 8 KH x 60 9 KH KH KH x KH KH KH x 24 3 KH KH KH KH x 30 4 KH x 36 5 KH KH KH KH x 42 6 KH x 48 7 KH KH KH KH x 60 9 KH KH X 24 3 KH KH KH KH x 30 4 KH x 36 5 KH KH KH KH x 48 7 KH KH KH KH x 60 9 KH All Prices F.O.B. Weston, Ontario and items are non-returnable. Aluminum Dockboards Ideal for truck or rail applications. Curb design adds strength and prevents equipment run-off. Skid resistant safety tread deck. Bevelled edges allow smooth access from either end. Bend at upper end permits both ends of plate to lie flat. Steel legs fit between dock and truck or railcar, prevent movement when in use. High tensile aluminum alloy construction. Width Model Cap. Inside Overall Wt. Price No. lbs. Curbs" Width" Length" Diff." lbs. /Each KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH All Prices F.O.B. Weston, Ontario and items are non-returnable. Shipping & Width Model Cap. Inside Overall Wt. Price No. lbs. curbs" Width" Length" Diff." lbs. /Each KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH Differential Differential Combination Boards For a height differential exceeding 11", use a ramp in combination with dockplate. Each plate can be converted to an equivalent-size ramp. Call us with your requirements. OPTIONS: rail DOCKBOARDS Fixed Spanlocks provide quick and safe access between dock and railcar, or between railcars. Sold in pairs. Model No. KH192 Adjustable Spanlocks permit use of the same board on truck or rail docks. Easily adjusted for various spans. Sold in pairs. Model No. KH190 OPTIONS: FORKlift HANDLES Makes movement of heavy boards and plates easy and safe. Recommended for boards and plates over 140 lbs. Sold in pairs. Model No. KH HOW TO ORDER: 1. Determine required capacity: 90% of gross weight for forklift trucks; 67% of gross weight for powered pallet trucks. Example: Wt. of Forklift + Wt. of Heaviest Load = Gross Weight x.90 = Required Capacity (5,500 lbs. + 10,000 lbs. = 15,500 x.90 = 13,500 lbs.) 2. Select dockboard width: add 12" to width of equipment to be used on dockboard. 3. Determine height differential (the vertical distance from dock floor to truck floor). Aluminum Wheel Risers Ideal for use when the loading dock is higher than the trailer bed. Levels out trailerwith dock; facilitates loading and unloading. 24" wide lbs. capacity per pair. Priced per Pair Model Deck Approach Overall Wt. lbs. Price No. " Length" Length" Length" /pair /Each KH KH KH KH KH KH KH KH KH KH KH KH

Soft Edge Flexible Warning & Protection Systems Tough, flexible polyurethane foam extrusions reduce the risk of personnel injury at high risk corners When applied to machinery, furnishings and walls,

5 Soft Edge Flexible Warning & Protection Systems Tough, flexible polyurethane foam extrusions reduce the risk of personnel injury at high risk corners When applied to machinery, furnishings and walls, Soft Edge prevents impact damages by absorbing even the hardest of impacts Highly visible black and yellow markings offer permanent warning in dangerous areas Simple "peel-away" adhesive installation on grease-free surfaces Excellent temperature range from -40 C to 100 C Corner Protectors Corner Protectors help prevent damage to walls in areas with forklifts, hand trucks and other warehousing traffic These guard are high-visibility yellow Made with high density polyethylene (HDPE) Crack and chip resistant Feature unique energy absorbing construction Anchors not included Can be mounted end to end Sold in sets of 2 proctectors : Polyethylene (7mm) E F (7mm) H (19mm) G (30mm) (35mm) (40mm) (26mm) (26mm) 1 Metre Price 5 Metres Price Style Model No. /Each Model No. /Each A KH866 KH865 B* KH868 KH867 C KH870 KH869 D KH872 KH871 E KH952 KH953 F KH954 KH955 G* KH956 KH957 H KH958 KH959 * Does not have peel-away adhesive. Held by pressure fit. Corner Accessories Makes a neat corner where two foam bumper guards protection profiles meet. MN379 D MN (47mm) Wall Protectors Wall Protectors help prevent damage to walls in areas with forklifts, hand trucks and other warehousing traffic These guard are high-visibility yellow Made with high density polyethylene (HDPE) Crack and chip resistant Feature unique energy absorbing construction Anchors not included Can be mounted end to end Sold in sets of 2 proctectors : Polyethylene Sold per Set No. L" x W" x H" lbs. /Each KH x 6 x KH x 6 x Sold per Set No. L" x W" x H" lbs. /Each KH x 2 x 6 8 KH x 2 x Lift Gate The Lift Gate can be lifted out of the way with a single finger Simply lift and the self folding action folds the gate in a vertical position With the assistance of the air assist cylinder the gate can be lifted with the slightest of effort Manufactured of steel tubing with a corrosion resistant coating Ideal for mounting on loading dock doors to help reduce the possibility of people falling Unique design can be either wall or floor mounted Gate type: Single Gate section sold individually Shown with 2 units MN381 MN382 Model Price No. Description /Each MN379 2 Way - Use with Profile A MN380 3 Way - Use with Profile A MN381 2 Way - Use with Profile E MN382 3 Way - Use with Profile E MN383 2 Way - Use with Profile H MN384 3 Way - Use with Profile H 216 Model Mfg. Expanded Collapsed Expanded Collapsed Wt. Price No. No. " " Length' Length" lbs. /Each MN700 SLG / / /4 18 MN701 SLG / / /4 30 shipping &

Modular Cable & Hose Protection Systems Features: Polyurethane construction, non-conductive material 36" length per lineal protector Five bar tread plate surface warning symbols molded into protector

Weather and abrasion resistant; high load-bearing capacity Insulates electrical cables from human contact Increases traction Lightweight; easy to transport, set-up, breakdown, and store; multi-length

/Each Extra Heavy-Duty KH687 5-Channel Protector 36 20 2 5/16 1 1/4 1 1/4 20 150 25 KH688 5-Channel End Caps (Female) 7 1/2 20 2 5/16 1 1/4 1 1/4 20 150 3.

5 4-Channel End Caps (Male) 5 1/4 20 2 5/16 1 5/6 1 1/4 20 150 3.

6 Modular Cable & Hose Protection Systems Features: Polyurethane construction, non-conductive material 36" length per lineal protector Five bar tread plate surface warning symbols molded into protector Modular interlocking design Recessed carrying handle Patented T-Connectors to extend to any length Universal safety colours B A E D C Female end cap B Male end cap A A T-connector systems Benefits: Weather and abrasion resistant; high load-bearing capacity Insulates electrical cables from human contact Increases traction Lightweight; easy to transport, set-up, breakdown, and store; multi-length applications Allows for moving with ease High visibility KH699 KH700 KH702 D E Max. Load Model A B C Channel Channel lbs. per tire Wt. Price No. Description L" W" H" W" H" at 21 C lbs. /Each Extra Heavy-Duty KH687 5-Channel Protector /16 1 1/4 1 1/ KH688 5-Channel End Caps (Female) 7 1/ /16 1 1/4 1 1/ Channel End Caps (Male) 5 1/ /16 1 1/4 1 1/ KH691 4-Channel Protector /16 1 5/6 1 1/ KH692 4-Channel End Caps (Female) 7 1/ /16 1 5/6 1 1/ Channel End Caps (Male) 5 1/ /16 1 5/6 1 1/ KH695 3-Channel Protector /16 2 1/4 2 1/ KH696 3-Channel End Caps (Female) 8 1/ /16 2 1/4 2 1/ Channel End Caps (Male) /16 2 1/4 2 1/ KH699 2-Channel Protector /8 3 1/4 3 1/ Heavy-Duty GENEral PURPOSE KH700 5-Channel Protector /4 1 15/16 1 5/16 1 5/ KH701* 5-Channel End Caps 4 3/4 17 1/4 1 15/16 1 5/16 1 5/ KH702 1-Channel Protector /2 1 5/8 1 1/4 1 1/ *Female and male end cap included Industrial Cord Covers Protect your cables from foot and vehicular traffic Constructed from non-conductive vulcanized rubber Suitable for indoor and outdoor use Withstands car and light truck traffic up to 5000 lbs. per axle Stronger and longer lasting than PVC covers Excellent in temperatures from -40 C to 150 C Black with yellow safety stripe 5' 10' Channel Price Model No. Model No. Description W" H" W" H" /Each KH907 KH908 1 Channel 3 1/4 3/4 3/4 1/2 KH909 KH910 1 Channel /4 KH911 KH912 2 Channels 5 1/2 1 1/8 7/8 3/4 KH913-1 Channel 6 1 7/8 1 1/2 1 1/2 Light-Duty channel Systems Gripper connector system Made from tough, high impact absorbing, non-conductive polyurethane Resistant to oil, fuels and lubricants Recessed carrying handle molded in to the underside of the protector Capacity: 5,000 lbs. per tire at 21 C Colours: grey and safety yellow Gripper connector system Model Overall Dimensions Channel Dimensions Wt. Price No. Description A Length" B Width" C " D Diameter" E " lbs. /Each KH981 5 Channel Protector /9 1 3/5 1 1/4 1 1/ KH986 3 Channel Protector /5 2 1/4 2 1/4 2 1/4 23 Shipping & 217

FLATBED CARGO CONTROL PRODUCTS

437 STANDARD WINCH FLATBED CARGO CONTROL PRODUCTS LOW-PROFILE WINCH PORTABLE WINCH PORTABLE WINCH For Weld-on Bottom Mounting Part No. 1010102 STANDARD SLIDING WINCH For Weld-On Side Mounting Part No.