Centrifugal Ceiling Exhaust and Inline Cabinet Fans Models SP and CSP

Transcription

1 entrifugal eiling haust and Inline abinet Fans s SP and SP January 201

2 s SP and SP eiling and abinet Fans Great things come in small packages, as do our SP ceiling ehaust fan and SP inline cabinet fan models. e assured when you buy any Greenheck product, it is a quality product at a competitive price. Plus, we guarantee our SP and SP fans with a three-year warranty. We are your market leader for the most comprehensive ceiling and cabinet fan line in the market. Typical Installations Multifamily housing Hotels Hospitals Schools athrooms Storage rooms enefits Industry leading sound levels ompact size Wide range of performance vailable with motors for higher efficiency and more controllability Table of ontents Standard onstruction Features Power Ratings... ertifications... Vari-Green Motors and ontrols... 7 Sound and Fan Selection.... NRGY STR pproval Number ode... 9 SP-VG... SP--VG SP SP- and SP SP-L SP SP SP (50 cycle)... 1 SP (50 cycle) ccessories lectrical ccessories ischarge ccessories Pressure rop Specifications Vari-Green Specifications

3 s SP and SP eiling and abinet Fans omparison Location Mounting irflow pplication rive Type Impeller Type Performance Outdoor Indoor Roof urb ase/floor Hanging Wall eiling Mounted haust Supply Reversible Recirculate General/lean ir ontaminated ir Spark Resistant Grease (UL 72) Smoke ontrol (UL) High Wind (150 mph) High Temp (above 200 F ) elt irect entrifugal Propeller/ial Mied Flow Maimum Volume (cfm) Maimum Static Pressure (in. wg) SP 1,00 1 SP 3,00 1 SP fans are designed for ceiling mounted ehaust applications. SP fans are designed for inline supply or ehaust applications. Level of onstruction escription Premium Plus: SP VG Green/energy efficient highest performing Premium onstant FM SP -VG eiling Fan: 3 Speed FM Selection Premium eiling Fan: SP Widest selection to meet sound requirements elue eiling Fan: SP ompact to fit most applications with quiet operation Low Profile eiling Fan: SP L esigned to fit in 24 wall construction conomy eiling Fan: SP esigned for light commercial applications Premium Inline Fan: Outperforms the SP competition and is preferred by specifying engineers elue Inline Fan: SP ompact design to fit in small remote spaces ll dimensions are in inches (millimeters) eiling Fans Inline Fans Profile min. height 7 inches (17 mm) 9 inches (229 mm) 9 inches (229 mm) 7 inches (17 mm) 3 5 inches ( mm) 3 5 inches ( mm) 9 inches (229 mm) 7 inches (17 mm) Sound min. sones <0.3 <0.3 < ir Volume ma. cfm 7 cfm (120 m³/hr) 130 cfm (220 m³/hr) 1,00 cfm (271 m³/hr) 200 cfm (340 m³/hr) cfm cfm (5 m³/hr) 3,775 cfm (414 m³/hr) 15 cfm (314 m³/hr) UL Listing UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit (sizes 1 and 0 only) UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit (Sizes 390 and smaller) UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit. UL Listed UL/cUL Listed UL/cUL Listed 3

4 Standard onstruction Features SP- and SP--VG 3 11 SP SP SP-L SP-VG SP- SP

5 Standard onstruction Features 1 ackdraft amper 2 Outlet 3 Power Pack 4 lectrical ccess 5 lectrical Knockouts coustic Insulation Number and escription Specific Features for ach SP-VG SP- SP- SP- SP-L SP- SP- urable plastic to reduce backdrafts luminium to reduce backdrafts Round - For quick and easy connections VG VG Square - For quick and easy connections Oval - Metal construction for increased fire resistance Removes quickly for maintenance/replacement Includes conversion from horizontal to vertical discharge Vertical electrical access to eliminate drilling holes eiling Horizontal electrical access ternal electrical access to save installation time liminates drilling holes (horizontal or vertical) bsorbs sound 7 isconnect Servicing is quick and safe Large for easy wiring lectrical Junction o 9 Mounting rackets 11 Housing 12 Motors 13 ccess Panel clusive lectrical Wiring Feature oncealed attachment screws securely fasten grille to housing for quiet, rattle free operation djustable for multiple installation conditions Integral for quick installation mbossed galvanized steel for rigidity low profile for height restricted areas Motors are compatible for use with speed controls and have thermal overload protection omestic & International 50 cycle, 220v or 240v 0 cycle, 115v, 20v, 220v, 230v, & 277v options (See PS or pg. for availability) 0 cycle, 115v only 0 cycle, 115v only Wall 0 cycle, 115v only Gain easy access to internal components once installed lectrical access cover located on the housing eterior. This feature permits eternal wiring without removing the power assembly, saving installation time and cost. vailable on models SP- and SP-. ouble-wide Fans vailable for applications requiring 700 cfm or greater. ouble-wide fans have two double-width forward-curved wheels, which are housed in separate scrolls, and driven by a single motor. vailable on models SP- and SP-. Vertical ischarge haust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. vailable on SP- and SP- models. 5

6 Power Ratings s vailable (X) vailable Motor Voltage and ycle Ratings 115V/ 0Hz 115V/ 50Hz Power Rating V/Hz V/ 50Hz V/ 0Hz 277V Vari-Green Motor Option SP-50 SP-70 SP-90 SP-1 SP-125 SP-130 SP-190 SP-200 SP-250 SP-290 SP-390 SP-4 SP-5 SP-700 SP-7 SP-70 SP-900 SP-50 SP-14 SP-1550 SP-50 SP-70 SP-0 SP-90 SP-1 SP-150 SP-200 SP-L50 SP-L0 Note: ll motors are rated for continuous use. s vailable (X) SP-50 vailable Motor Voltage and ycle Ratings 115V/ 0Hz Power Rating V/Hz 115V/ 50Hz V/ 50Hz V/ 0Hz 277V Vari-Green Motor Option SP-0 SP-0L SP-1 SP-1L SP-1 SP-125 SP-190 SP-200 SP-250 SP-290 SP-390 SP-4 SP-5 SP-700 SP-7 SP-70 SP-900 SP-50 SP-14 SP-1550 SP-1750 SP-2150 SP-300 SP-1 SP-150 SP-200 Greenheck Fan orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and M Publication 311 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Greenheck Fan orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Products that earn the NRGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. Fans that are NRGY STR qualified include: SP-70, SP-90, SP-1, SP-125, SP-190, SP-200, SP-250, SP-70, SP-0, SP-90, SP-L50, SP-L0, SP-0-VG, SP-0L-VG, SP-1-VG, SP-1L-VG, SP VG and SP VG s SP and SP are listed electric fans (UL/cUL 507). eiling haust Fans are also UL Listed for above bathtub/ shower with GFI branch protected circuit. File no Note: SP/SP fans are rated for direct contact with insulation.

7 Vari-Green Motor & ontrols Vari-Green ontrols Vari-Green Motor Motor Technology Information & dvantages - Greenheck s Vari-Green (VG) lectronically ommutated () motor combines motor technology, controllability and energy-efficiency into one single low maintenance unit and is the industry's first fully controllable motor. The motor operates on power that is converted to providing more efficient motor operation as compared to an operation. The controllability of the Vari-Green motor allows communication compatibility with a variable volume system. This allows speed adjustment of the motor to meet the needs of the system to ehaust air as needed and reduce overehausting conditioned air. vailable Vari-Green ontrols and s s ontrols SP- 0(L)- VG SP- 1(L)- VG SP VG SP VG SP/SP- 5- VG SP/SP- 7- VG VO X X Temperature/ Humidity X X Two-Speed X X Remote ial X X Touch Remote X X onstant Pressure X X Transformer X X uilt-in Time elay X X uilt-in Two Speed X X onstant irflow X X X X 0-V X X FM X X See Greenheck's Vari-Green Motor and Vari-Green ontrols brochures for more information. ir Quality ontrol a Vari-Green motor via changes in Volatile Organic ompounds (VO s). VO s are gasses that are emitted from humans, building materials, perfumes, foods, and furniture off-gassing. Range is O 2 ppm equivalent. Institutional facilities Schools, court houses, hospitals; bathrooms, waiting rooms, cafeterias. ommercial buildings Offices, conference rooms, bathrooms, break rooms. ir Quality ontrol a Vari-Green motor via changes in temperature, humidity, or both. Range is 32 to 120 F and 0 to 0% relative humidity. Multifamily structures partments, condos, hotels; bathrooms, utility rooms. ommercial buildings Office buildings; offices, conference rooms, utility rooms, bathrooms. Transformer - Provides 24V power from the eisting line voltage at the fan to the Vari-Green motor and controls. ual voltage primary (120/240V) transformer provided with the fan. Remote ial or Touch Remote - llows the user to manually adjust a fan s speed from a remote location and mounts to a wall using a 24 junction bo. The 24V transformer, described above, is included with all orders. wall cover plate is supplied. The Touch Remote includes a countdown timer to automatically turn the fan off after, 30, 0 or 90 minutes. Recommended for use in commercial buildings and restaurants. Two-Speed ontrol with Integral Transformer - ontrol allows motor RPM to be set at two independent speeds (high or low). Meets minimum airflow requirements with the ability to bump up to high speed in an emergency or meet maimum airflow requirements or reset to low speed for energy conservation. onstant Pressure ontrol - ontrol Vari-Green motor via static (variable volume) or velocity (constant FM) pressure on the inlet or outlet side of the fan. Optional, one or two, duct or room probes for use in: Multifamily structures - partments, condos, hotels; dryers, residential kitchens and bathrooms. Institutional facilities - Schools, prisons, multistory office buildings; bathrooms. FM Speed Selector - These models utilize an internal switch to set the fan to run at one of three speeds. User to set 3-position switch to desired airflow. 7

8 Sound and Fan Selection Things to know when sound is critical Sound ata The sound data shown in this catalog has been presented to aid the system designer in selecting a fan which will meet the desired sound criteria. Sone levels have been included on the performance pages to provide a means of quickly evaluating the relative loudness of a fan selection. What is a sone? Sones are an internationally recognized unit of loudness. In practical terms, the loudness of one sone is equivalent to the sound of a quiet refrigerator measured from five feet away in an acoustically average room. sone is a single number rating, indicating the inlet noise derived from the eight audible octave bands. Sones are a linear measurement of sound level. For eample, a sound level of sones is twice as loud as 5 sones. operation. pplied and installed as recommended, SP and SP sound levels will fall well within the ranges shown in the Suggested Limits for Room Loudness chart. For applications where sound levels are critical, a remote mounted SP with ductboard is recommended. Placement of SP and SP fans should take into account the desired sound level at the location of the listener. The compact size of the SP and SP fans provides the system designer greater fleibility in locating these fans for lowest sound levels. In critical sound areas, insulated ductwork, fleible duct connections, or placing the fan in a remote section of the ductwork (away from the critical area) offers the best means of meeting desired sound levels. an radiated noise increase sound levels? Radiated noise from fan housings can cause unacceptable sound levels on any brand of fan. The size of these fans allows them to be placed in areas where this noise will be transmitted to the conditioned space through walls or ceilings. Where possible, cabinet fans should be located in remote parts of the ventilation system. Fiberglass Remote mounted model SP with vibration isolators and insulated ductwork provides the quietest installation. Where should an SP or SP fan be used? SP and SP fans are designed for the lowest possible sound levels. Forward-curved wheels, insulated housings and vibration isolators between the motor and housing contribute to quiet, efficient Suggested Limits for Room Loudness Sones d Private homes (rural and suburban) onference rooms Hotel rooms, libraries, movie theatres, eecutive offices Schools and classrooms, hospital wards and operating rooms ourt rooms, museums, apartment houses, private homes (urban) Restaurants, lobbies, general open offices, banks orridors and halls, cocktail lounges, washrooms and toilets Hotel kitchens and laundries, supermarkets Reprinted from M Publication 302 (pplication of Sone Ratings for Non-ducted ir Moving evices, with room sone d correlations) with the written permission from the M International, Inc., 30 West University rive, rlington Heights, IL When room sound levels are critical, such as in eecutive offices, conference rooms, hospital operating rooms, and school study areas, a SP fan is the best choice. Shown here is a comparison of SP and SP fans of the same size, with equal performance in typical installations. The SP shows lower sone values. FM WG FRPM Sones SP / SP / Sone value on SP is with insulated inlet duct. NOT: Values above are for room loudness and are not sound ratings. Room loudness is the resulting level in a conditioned space after the acoustical qualities of the room have been accounted for.

9 NRGY STR NRGY STR is a market-based partnership formed to reduce greenhouse gas emissions through energy efficiency and make it easier for consumers to identify energy-efficient products that offer savings, performance, features, and comfort. To earn the NRGY STR label, products must meet strict energy-efficient standards set by the U.S. nvironmental Protection gency (P) for energy consumption, air and sound performance. Fan models that are NRGY STR qualified are identified in this catalog. Note: NRGY STR is only for products 500 cfm or less. Products that earn the NRGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. Fans that are NRGY STR qualified include: SP-70, SP-90, SP-1, SP-125, SP-190, SP-200, SP-250, SP-70, SP-0, SP-90, SP-L50, SP-L0, SP-0-VG, SP-0L-VG, SP-1-VG, SP-1L-VG, SP VG and SP VG Number ode The model number code system is designed to completely identify the fan. The remainder of the model code is determined by the size and performance of the fan. SP - 50 FL - VG Light Options L - Fan/Light (L) ombination FL - Fan/Light (Fluorescent) ombination Nominal cfm at 0. inches static pressure Level of onstruction - Premium unit; lowest sound, insulated housing - elue unit; low sound, low profile - conomy unit; inepensive - No letter designation identifies model as Premium Plus with a Vari-Green motor L - Low Profile, ceiling/wall mounted SP - Silent Partner SP - abinet Silent Partner Vari-Green Motor Option 9

10 SP-VG Premium eiling haust Fan SP-VG SP-VG imensions 0(L) 1(L) 11 3 (29) 11 3 (29) 1 2 (27) 1 2 (27) 7 5 (194) 7 5 (194) 4 (2) esigner (35 330) (35 330) Unit Weight 12 (5) 12 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. SP-VG 0, 1 *mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. SP-VG Performance NRGY STR RPM mps* Ma. Input Watts* SP-0(L)-VG SP-1(L)-VG FM / Static Pressure in Inches wg FM Sones <0.3 <0.3 < FM Sones <0.3 <0.3 < Performance certified is for model SP ehaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : free inlet spherical fan sone levels.

11 SP--VG Premium onstant FM eiling haust Fan SP--VG SP--VG imensions SP VG SP VG (337) 5 (270) 9 (229) esigner (37 337) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. ecorative (37) sq. Unit Weight 12 (5) SP VG SP VG *mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. SP--VG Performance SP VG SP VG NRGY STR FM Selection RPM Ma mps* Ma Watts* FM/Static Pressure in Inches wg FM Sones <0.3 < FM/Watt* Watts* FM Sones < FM/Watt* Watts* FM Sones < FM/Watt* Watts* FM Sones < FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* Performance certified is for model SP ehaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : free inlet spherical fan sone levels. 11

12 SP- Premium eiling haust Fan SP- SP- imensions 50, 70, 90 1, 125, , 250, 290, 390 4, , , 50, 14, (337) (337) 14 (35) 1 (457) 23 5 (00) 1 (457) (03) 5 (270) 5 (270) 11 7 (302) 14 3 (35) 11 5 (295) 14 3 (35) 14 3 (35) 9 (229) 9 (229) (2) (3) 11 5 (295) (3) (3) (495) (254) 17 7 /1 (443) esigner (37 337) (492 41) (3 343) (492 41) (35 41) ecorative (37) sq. ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. Unit Weight 12 (5) 17 () 24 (11) 31 (14) 34 (15) 34 (15) 5 (25) SP SP- 700, SP- 1-5, 7, 70 12

13 SP- Premium eiling haust Fan *mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. SP- Performance NRGY STR RPM mps* Ma. Input Watts* SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP FM / Static Pressure in Inches wg FM Sones FM Sones <0.3 <0.3 <0.3 <0.3 FM/Watt* Watts* FM Sones <0.3 <0.3 < FM/Watt* Watts* FM Sones <0.3 <0.3 < FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones Performance certified is for model SP ehaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : free inlet spherical fan sone levels. 13

14 SP- and SP- elue and Standard eiling haust Fan SP- SP- imensions * esigner ecorative Unit Weight 50, 70, 0 90, 1, 150, (352) 13 7 (352) (292) (292) 7 (179) 7 (179) (32) (37 337) (32) (37) sq. ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. 9 (4) (5) *mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. 14 SP- Performance NRGY STR RPM mps* Ma. Input Watts* SP SP SP SP SP SP SP FM / Static Pressure in Inches wg FM Sones FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM Sones FM Sones Performance certified is for model SP ehaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : free inlet spherical fan sone levels. SP- SP- imensions F (191) (191) 3 5 (92) 3 (7) 1 5 (41) 1/2 (13) ecorative ( ) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). For complete dimensional information, see PS submittal drawings. SP- Performance RPM mps* Watts SP Unit Weight *Note: mp draw is approimate and may vary based on motor manufacturer. 5 (2) F FM / Static Pressure in Inches wg FM Sones Performance certified is for model SP ehaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : free inlet spherical fan sone levels.

15 SP-L and SP- elue Inline abinet Fan SP-L SP-L imensions F F esigner Unit Weight 50, (352) (292) 3 5 (92) 2 5 (7) (113) 3 3 () (37 337) 9.5 (4) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). For complete dimensional information, see PS submittal drawings. *Note: mp and watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. SP-L Performance NRGY STR RPM mps* Ma. Input Watts* SP-L SP-L FM / Static Pressure in Inches wg FM Sones FM/Watt Watts FM Sones FM/Watt Watts Performance certified is for model SP ehaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : free inlet spherical fan sone levels. SP- SP- imensions Inlet FG - diameter F G Unit Weight 1, 150, (352) (292) 7 (17) (32) (20) (3) 1 4 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet connection width is 1 inch (25 mm). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. *mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. SP- Performance RPM mps* Ma. Input Watts* SP SP SP FM / Static Pressure in Inches wg FM Sones Watts* FM Sones Watts* FM Sones Watts* Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on ft of insulated duct. 15

16 SP- Premium Inline abinet Fan SP- imensions F G 1, 125, , 250, 290, 390 4, , , 50, 14, , (327) 14 (35) 1 (457) 23 5 (00) 1 (457) (03) 35 (9) (115) 5 (270) 11 7 (302) 14 3 (35) 11 5 (295) 14 3 (35) 14 3 (35) (375) (419) 9 (229) (2) (3) 11 5 (295) (3) (3) (375) (419) (495) (254) (443) 2 (711) 40 (1) 11 (279) 11 7 (302) 12 7 (327) 1 7 (429) 22 5 (575) 1 7 (429) 22 5 (575) (32) (99) 7 3 (17) (254) (337) 1 2 (27) (337) (337) 13 (330) 14 5 (371) Unit Weight 1 (7) 23 () 3 (1) 34 (15) 3 (1) 59 (27) (31) 122 (55) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. G G F F Inlet SP-1-5, 5-VG, 7, 7-VG, 70 SP-700,

17 SP- Premium Inline abinet Fan *mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for 115V. SP- Performance RPM mps* Ma. Input Watts* SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP FM / Static Pressure in Inches wg FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nne of M 311. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on ft of insulated duct. 17

18 SP 50 ycle Performance For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for ceiling mounted ehaust fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs Full-line of grille and discharge accessories available SP- 1-5, 7, 70 SP imensions SP- 1, 125, , 250, 290, 390 4, (337) 14 (35) 1 (457) 1 (457) (03) 5 (270) 11 7 (302) 14 3 (35) 14 3 (35) 14 3 (35) 9 (229) (2) (3) (3) (3) esigner (37 337) (492 41) (492 41) (35 41) ecorative (37) square 7, 70 (254) 900, 50, , 1550 (47) Outlet connection width is 1 in. (25 mm). Mounting bracket width is 1½ in. (3 mm). SP- 50, 70, 0 90, 1, 150, (352) 13 7 (352) (292) (292) 7 (17) (32) (32) esigner ecorative (37 337) (37) square (37 337) Unit Weight 17 () 24 (11) 31 (14) 34 (15) 5 (25) Unit Weight 9 (4) (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. SP- (double-wide) 700, SP *Note: mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for V. SP Performance (50 Hertz Motor) RPM mps* Ma. Input Watts* SP SP SP SP SP SP SP SP SP SP SP SP FM / Static Pressure in Inches of wg FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones

19 SP 50 ycle Performance For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for inline cabinet fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs Full line of discharge accessories available SP imensions SP- F G 1, 125, , 250, 290, 390 4, 5, 5-VG 700 7, , 50, 14, , (337) 14 (35) 1 (457) 23 5 (00) 1 (457) (03) 35 (9) (115) 5 (270) 11 7 (302) 14 3 (35) 11 5 (295) 14 3 (35) 14 3 (35) (375) (419) 9 (229) (2) (3) 11 5 (295) (3) (3) (375) (419) (495) (254) (47) 2 (711) 40 (1) 11 (279) 12 (305) 12 7 (327) 1 7 (429) 22 5 (575) 1 7 (429) 22 5 (575) (32) (99) 9 (235) (254) (337) 1 2 (27) (337) (337) 13 (330) 14 5 (371) SP- F G 1, 150, (352) (292) 7 (17) (32) 1 4 (20) (3) Unit Weight 1 (7) 23 () 3 (1) 34 (15) 3 (1) 59 (27) (31) 122 (55) Unit Weight 1 4 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm). Mounting bracket width is 1½ in. (3 mm). For complete dimensional information, see PS submittal drawings. SP- 1-5, 7, 70 G F SP- (double wide) 700, G SP- Inlet FG F Inlet - diameter *Note: mp and Watt draw is approimate and may vary based on motor manufacturer. elow performance is for V. SP Performance (50 Hertz Motor) RPM mps* Ma Input Watts* SP SP SP SP SP SP SP SP SP FM / Static Pressure in Inches of wg FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones

20 ccessories Wheel Options Greenheck s ceiling and cabinet fans (models SP and SP) deliver high performance from a forwardcurved wheel. The forward-curved wheel design offers both high-efficiency and low sound. Fan wheels are constructed of polypropylene or steel as standard, and most models offer an aluminum wheel option. Level models utilize steel or polypropylene (standard) wheel construction depending on size. Level and L models are standard with a polypropylene wheel. SP- Replacement Power Packs Save installation and down time by replacing the entire power pack instead of individual components. vailable as a replacement ement part on all current and previous SP- models. Polypropylene Steel luminum ontractor t 4 Packs Save installation time and labor by installing the housing first, then installing the internal components after the sheetrocking, plastering and finishing is done. Housings are packaged in one bo, power assemblies and grilles are packaged in another bo. omponents are shipped to coincide with the phase of your project. ( SP- and SP-L series (50-0) only). 20

21 ccessories Options esigner - standard vailable in white polystyrene finish, with or without motion detector with time delay. Standard on SP models and L50 and L0 (no grille mounted motion detector option). luminum White enamel finish standard for models Optional for models and Stainless Steel Polished stainless steel finish optional for models and ecorative White plastic finish, with or without light, motion detector with time delay. Optional for models and ustom Molded polystyrene available in an array of colors. Includes all the same accessory options as the standard grilles. For more information on the many ways this grille option can be used, please contact your Greenheck representative. ustomized Lens Lenses can be customized with formed shapes or logos. ontact your Greenheck representative for details. Lighted Options Greenheck s fan and light combinations include either a prismatic or a frosted lens and either compact fluorescent or L lamps. Our unique light bo is manufactured with a reflective material to increase the light given off by either type of lamp. UL Listed for above bathtub and showers with GFI branch protected circuit. SP-, sizes SP-, sizes Note: When selecting a lighted grille it will add height to the fan assembly. See PS drawings for eact values. Prismatic Lens The prismatic lens design provides approimately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs. Frosted Lens The frosted lens option is a traditional design which lets approimately 0% of light through the lens. The lens may be easily removed to replace light bulbs. Note: ompact Fluorescent light bulbs are NRGY STR certified. Not all fan/lighted grill options are NRGY STR certified. See PS for availability. ompact Fluorescent Lamps (FL) GU24 ase,000 hour average rated life omplies with UL 1993 nd-of-life requirements Replacement bulbs can be found wherever standard light bulbs and fitures are sold L GU24 ase 25,000 hour life Reflective light bo nergy efficient NRGY STR qualified fitures alifornia nergy Title 24 compliant 5% more efficient than incandescent nergy efficient NRGY STR qualified fitures 21

22 ccessories Filters Fans used in most applications will collect airborne dirt on wheels and motors over time, even where air is not ecessively dirty. ccumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. irt buildup on the motor can cause it to overheat. ll of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to trap dirt before it enters the fan. These filters should be regularly cleaned to maintain performance. The Filter Loss hart below shows the effect the filter will have on performance. To determine the added resistance, divide the desired cfm by the filter area (ft 2 ). This will give ft/min. Use this with the filter loss chart to get the added resistance. Filters reduce sound levels, in addition to reducing dirt accumulations on the motor and wheel. SP Mesh Filter SP Filter Loss hart Filter esigner *Metal Filter rea (ft 2 ) SP F-200 F SP , F-200 F SP-4-5 SP-7-70 N F SP N F *luminium or Stainless Steel. Transition uct Reducer urable plastic construction 3 15 /1 (0) 4 15 /32 (114) For use with sizes: * Reducer 1-190* L50, L0 43 Reducer ll dimensions shown in inches (millimeters). Used in conjunction with R- 5 /32 (157) Hanging Vibration Isolators Vibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the eception of 1/4-20 threaded rod to be supplied by others. Fan mounting brackets include prepunched mounting holes for ease of installation. 1/4-20 hanging support rod by others Unit Size (114) 15 5 (397) (140) 15 (31) (171) (400) 4, 5, 7, (235) (502) (140) 25 3 (45) 900, 50, 14, (235) (4) 1750, (235) (933) (235) (1200) ll dimensions shown in inches (millimeters). R - Round uct onnector Replaces the standard square discharge R- duct connector and damper Uses eisting mounting holes R- includes a damper (polypropylene construction) R- does not include a damper (galvanized construction) Use with sizes: iameter R R ll dimensions shown in inches (millimeters). 22

23 ccessories eiling Radiation amper The National Fire Protection ssociation (NFP) Standard 90 requires openings in fire rated ceiling assemblies to be protected by appropriately rated ceiling radiation dampers. s a result, many local codes require fans installed in fire rated ceilings to be protected by dampers which are insulated against both heat and flame. Greenheck's ceiling radiation dampers are also Warnock Hersey Listed to go into a one hour combustible (wood) installation. Greenheck's UL/cUL lassified ceiling radiation dampers are rated for three hours of fire resistance in a steel/concrete installation. SP- SP- Fan Hanging Vibration Isolation RJ-4 and RJ-9 RJ-4 and RJ-9 RJ- RJ - Pitched Roof ap Steel construction with black enamel finish Integral flashing flange uilt-in birdscreen and damper Use for sizes: Throat SP- 3 in. eiling Radiation amper Fire Rated eiling RJ-4 RJ-9 RJ- 0, 0L, 50, 50-0, L50, L0 1, 0L, , (279) (47) (470) (235) (32) (99) 1 4 (2) (3) (400) ll dimensions shown in inches (millimeters) (135) 3 (24) 23 5 (00) (114) 1 2 (15) (241) 4 (2) diameter 9 ( ) ( ) SP- Fan 3 in. Hanging Vibration Isolation eiling Radiation amper Fire Rated eiling SP R Length () Width () Height UL W.H (343) 14 3 (35) (4) (14) (14) 11 1 (23) (311) (379) (311) (379) 3 (7) 3 (7) 3 (7) 3 (7) 3 (7) 3 3L L N ll dimensions shown in inches (millimeters). dd an L to all R models if fan & light combo is used. *R is approimately 1/4 inch ( mm) larger than housing dimension. (See Installation, Operation and Maintenance Manual) 3.5 (9) (254) 2.75 (73).5 (15) 1.25 (42) () (130) (23) (23) (292) ll dimensions shown in inches (millimeters). L-3 - lbow ischarge with esigned for installation under roof eaves lack epoy finish (elbow and grille) uilt-in damper SP and SP sizes

24 lectrical ccessories ehumidistat ehumidistats are available with models SP and SP fans to ventilate humid spaces. The sensor automatically detects ecess humidity and activates a ventilation fan for control of ecess condensation. There are automatic, manual, or air cycle modes. This can replace a single pole switch for control of a ventilating fan. Rated for 120V, 3, 1/ HP UL Listed Note: ll switch covers are standard white. Other colors available upon request. Speed ontrols Speed controls may be used on model SP and SP fans for manual adjustment of the fan s performance (for final system balancing) or to control the fan s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 0% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Solid state speed controls are available for a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if Internal Mounting the combined total amperage of the fans does not eceed the control rating. Voltage Rating mp Rating WSS V mp WSS V mp 15WSS V 15 mp 5W V 5 mp WSS V mp 5W V 5 mp SP ONTROL INTRNL N/OR XTRNL MOUNTING OPTIONS FN SIZS I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ No No No No No No No No No No No *I/ I/ No I/ I/ *I/ No I/ I/ No I/ No No I/ No I/ No I/ No No No No No No * No * No No No No No No No No No No No No No I/ I/ I/ I/ *I/ No No No No No No No No No No No No No No No = ternal mounted only I/ = vailable Internal and ternal Mounted KY: * Only available on the -series (-series is not available) No = Not available NOTS: Speed controllers are not available for 20V applications. SP-50 speed controller is shipped loose only. ll speed controller options listed in table are UL Listed. Handy bo sizes are 24 for all options above ecept WSS and 15WSS, which are 44. Speed controller is not compatible with SP VG and SP VG Thermostat Reverse cting djustable for temperature ranges between 30ºF to 1ºF (-1º to 43º), 120V, 1 amp ooling When the temperature in the space rises above the set point of 50ºF to 90ºF (º to 32º) the contacts close and the thermostat will signal the fan to come on in order to ehaust air from the space. UL pproved S ertified 120V, 22 mps 24

25 lectrical ccessories Switches Switches may be used on model SP and SP fans to enable manual control of your fan or fan and light combination. 1 Function Single pole rocker switch assembly Rated for V, 15 UL Listed 1 Function with Pilot Light Single pole light combination switch assembly Rated for 120V, 15 UL Listed 2 Function Two single pole combination switch assembly Rated for 120V, 15 UL Listed Time elay Switch Time delay switches save energy by automatically turning off equipment. They may be used with SP and SP fans or fan and light combinations for etended operating time of fan. Time delay switches act in the same manner as a standard switch, however, there is a delay of to 0 minutes after the fan has been turned off. Minimum Ventilation ontrol This control contains a microprocessor that monitors the operation of the fan to make sure that the space is receiving the correct amount of ventilation per SHR V, 2.5 UL Listed Motion etectors Motion detectors may be used with SP and SP fans or fan and light combinations. Motion detectors use a passive infrared motion detector to automatically turn the fan on when a change in motion is sensed. They have a viewing area of degrees, however they must be placed in the line-of-sight. Mounted vailable on models up through size SP-390 and SP-200. Rated for 115V UL Listed Wall Mounted For use on fan or lights. vailable shipped loose. Rated for 115V UL Listed Requires 24 handy bo Time delay can be set for 30 seconds to 30 minutes in 5 minute increments Firestat 120V, mp to 120V, 4 mp capacities Ma element temperature of 350ºF (177º) Type II 5 inch insertion Type III 11½ inch insertion Transformers Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. ll transformers are shipped loose. See performance pages for motor amp ratings. Note: ll switch covers are standard white. Other colors available upon request. s Voltage Ratings mp Ratings T /277V to mps T /277V to mps T /277V to mps T-. 230/277V to 115. mps 25

26 ischarge ccessories W - Hooded Wall ap (Round onnection) luminum construction - aluminum finish For outside wall applications uilt-in birdscreen (not available on W-4) and damper W - Hooded Wall ap (Square or Rectangular onnections) Steel construction with black enamel finish For outside wall applications uilt-in birdscreen and damper G F W-4 W- W- Recommended Sizes 50, L50, L , 0, 0L , 1, 0L (15) 11 (279) 11 (279) ll dimensions shown in inches (millimeters). 4 (1) 4 (1) 4 1 (5) 5 1 (130) 5 (127) 5 (127) (9) Recommended Sizes W W W F G (140) 1 4 (20) 1 4 (20) (324) 1 4 (20) (514) (9) 1 4 (2) 1 4 (2) ll dimensions shown in inches (millimeters). 1 4 (20) 1 4 (2) (44) 11 1 (23) 1 4 (2) (44) () 3 4 (171) 3 4 (171) 5 (127) 5 (127) 5 (127) WL - Wall Louvered ischarge nodized aluminum grille uilt-in damper Not recommended for eterior applications eposed to severe weather conditions. n eternal wall louver is recommended for such applications. V - rick Vent esigned for installation in masonry walls nodized aluminum construction uilt-in aluminum mesh insect screen WL Recommended Sizes WL (305) (502) (133) ll dimensions shown in inches (millimeters). (254) 1 (457) (197) 9 (229) (9) Recommended Sizes V (20) V (305) V (397) ll dimensions shown in inches (millimeters) (197) (197) (197) 4 (2) 4 (2) 4 (2) 2

27 ischarge ccessories R-7 - urb ap Weathertight aluminum construction Integral birdscreen uilt-in curb cap Requires roof curb ia. 1.5 (3) GRS - urb ap ll aluminum eterior construction Galvanized steel internal supports Integral birdscreen uilt-in curb cap Requires roof curb ia (44) For all sizes: Throat ia. R (31) 12 (305) (254) 3 (12) 7 (17) ll dimensions shown in inches (millimeters). GRSF - Flashing Flange ll aluminum eterior construction Galvanized steel internal supports Integral birdscreen uilt-in flashing flange For all sizes: Throat ia. GRSF (54) (521) (197) 2 (51) 1 4 (20) GRSF (0) 29 (737) (254) (9) (311) GRSF (72) 29 (737) 11 (279) () (414) GRSF (4) (902) (2) (95) (51) ll dimensions shown in inches (millimeters). ia. For all sizes: For all sizes: Throat ia. GRS (43) (521) (197) 2 (51) 1 4 (20) GRS (559) 29 (737) (254) (9) (311) GRS (0) 29 (737) 11 (279) () (414) GRS (72) (902) (2) (95) (51) ll dimensions shown in inches (millimeters). RF-7 - Flashing Flange Weathertight aluminum construction Integral birdscreen uilt-in flashing flange Throat ia. RF (457) 12 (305) (254) 3 (12) 7 (17) ll dimensions shown in inches (millimeters). ia. ccessory Pressure rops 30 The chart to the right can be used with all of the discharge accessories shown on pages 23, 2 and 27. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection. Volume (cfm 0) WL-1 RJ- V-157, W-1 V-12, W- W- W-3, W-, RJ-9, L-3, WL-3, V-0, RF-7, R Pressure rop (Inches wg) bove accessories tested with 4 feet of inlet duct 27

28 Specifications Vari-Green Vari-Green Motor Motor to be an electronic commutation () motor specifically designed for fan applications. induction type motors are not acceptable. amples of unacceptable motors are: Shaded Pole, Permanent Split apacitor (PS), Split Phase, apacitor Start and 3 phase induction type motors. Motors shall be permanently lubricated with heavy-duty ball bearings to match the fan load and prewired to the specific voltage and phase. Internal motor circuitry shall convert power supplied to the fan to power to operate the motor. Motor shall be speed controllable down to 20% of full speed (0% turndown). Speed shall be controlled by either a potentiometer dial mounted on the motor or by a 0- V signal. Motor shall be a minimum of 5% efficient at all speeds. Vari-Green ontrol - Remote ial Remote ial shall be a Vari-Green ontrol specifically designed to provide 0- volt signal to Greenheck s Vari-Green Motor. Vari-Green ontrol - Two Speed Two speed control shall be a Vari-Green ontrol specifically designed to allow the Vari-Green Motor to operate at two discrete speeds. Two speed control shall include two dials that may be set at any point between 0 and volts and an integral transformer capable of reducing 115/ volt power to 24 volt power. Vari-Green ontrol Indoor ir Quality Temperature / Humidity ontrol to be a packaged indoor air quality control designed to regulate fan speed based on level of temperature and/or relative humidity in a space. ontrol shall include a Proportional Integral erivative (PI) feedback loop and shall have labeled terminal strips for easy wiring. Fan shall be direct drive including an electronic commutation () Vari-Green Motor. ontrol package shall be Vari-Green Indoor ir Quality Temperature / Humidity ontrol. Vari-Green ontrol Indoor ir Quality VO (Volatile Organic ompound) ontrol to be a packaged indoor air quality control designed to regulate fan speed based on level of VO concentration in a space. ontrol shall include a Proportional Integral erivative (PI) feedback loop and shall have labeled terminal strips for easy wiring. Fan shall be direct drive including an electronic commutation () Vari-Green Motor. ontrol package shall be Vari-Green Indoor ir Quality VO ontrol. Vari-Green ontrol onstant Pressure ontrol to be a packaged constant pressure control designed to regulate fan speed based on demand. ontrol shall include a Proportional Integral erivative (PI) feedback loop and shall have all components prewired to labeled terminal strips for easy wiring. System shall include the appropriate pressure tap and preset pressure transducer. Fan shall be direct drive including an electronic commutation () Vari-Green Motor. ontrol package shall be Vari-Green onstant Pressure ontrol. Indoor installations shall include pressure tap (duct or room) and control bo with integral pressure transducer. Outdoor installations shall include duct pressure tap, pressure transducer, and control bo. ontrol bo shall be prewired and in a NM-3R weather tight enclosure for mounting outdoors near the fan location. L information Greenheck became one of the first manufacturers in the ir Movement and ontrol industry to join the L/green movement when they joined the United States Green uilding ouncil (USG) in Greenheck has been actively researching qualification requirements for our products to meet L credits and prerequisites. The Vari-Green motor significantly helps qualification efforts for the nergy and tmosphere credits and prerequisites; specifically credit one, Optimize nergy Performance and prerequisite two, Minimum nergy Performance. 2

29 Vari-Green Specifications s SP VG and SP VG eiling mounted ehaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 0.5 inch acoustical insulation. The outlet duct collar shall include a plastic backdraft damper. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-50 through SP-390 shall be constructed of high-impact polystyrene. The access for wiring shall be eternal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. The fan shall have a rocker switch with 3 cfm settings located internally. For the SP VG the settings are 50, 70, and 90 cfm. For the SP VG the settings are 90, 1, and 130 cfm. The fan will come preset at 70 cfm for the SP VG and 1 cfm for the SP VG. Upon installation, the switch shall be selected to the desired FM. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. omplete specifications, in onstruction Specifications Institute (SI) format, are available on greenheck.com. 29

30 Specifications SP-0(L)-VG, SP-1(L)-VG s SP-50 thru 1550 eiling mounted ehaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 0.5 inch (13 mm) acoustical insulation. The outlet duct collar shall include a polypropylene backdraft damper on SP-50 - SP-90 and a spring loaded aluminum backdraft damper on SP-1 and larger. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-50 through SP-390 shall be constructed of high-impact polystyrene and for sizes SP-4 through SP-1550, the grille shall be constructed of aluminum. s shall be non-yellowing. The access for wiring shall be eternal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. eiling mounted ehaust fans shall be of the centrifugal direct drive type with an motor and overload protection. The fan housing shall be constructed of galvanized steel and have a low profile housing. The outlet duct collar shall have an aluminum backdraft damper. The fan shall be capable of built-in two-speed operation with a time delay. The access for wiring shall be eternal. The motor disconnect shall be internal and of the plug-in type. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance Seal and shall be UL/cUL Listed. s SP-50, 70, 0, 90, 1, 150, and 200 eiling mounted ehaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be inches (152 mm) in diameter and shall include a backdraft damper. The designer grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be internal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance Seal and shall be UL/cUL Listed. eiling fans shall be model SP-50, 70, 0, 90, 1, 150 or 200 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. 30

31 Specifications SP-50 eiling mounted ehaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be a sleeve for ease of connection to 3-inch (7 mm) and 4-inch (2 mm) round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with torsion springs. The wheels shall be constructed of high-strength polymer. The access for wiring shall be easily accessible internally. The motor disconnect shall be internal and of the plug-in type. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal. SP-50 shall be UL Listed. Fans shall be model SP-50 as supplied by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. SP-L50 and SP-L0 Wall or ceiling mounted ehaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The galvanized duct collar shall be sized to fit a 4-inch diameter duct and shall include a backdraft damper. The grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be internal. The motor disconnect shall be internal and of the plug-in type. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance Seal, shall be UL/cUL Listed and shall be nergy Star 4.0 qualified. Wall or ceiling mount fans shall be model SP-L50 or L0 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. s SP-1 thru 300 uct mounted ehaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 0.5 inch (13 mm) acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper and shall be adaptable for horizontal or vertical discharge. The access for wiring shall be eternal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance Seal and shall be UL/cUL Listed. eiling fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. s SP-1, 150 and 200 uct mounted ehaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be inch (152 mm) in diameter to accept -inch (152 mm) round ductwork and shall include a backdraft damper. The access for wiring shall be internal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance Seal and shall be UL/cUL Listed. eiling fans shall be model SP-1, 150 or 200 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. 31

32 esign and Selection Support njoy Greenheck s etraordinary service, before, during and after the sale. Greenheck offers added value to our wide selection of top performing, energyefficient products by providing several unique Greenheck service programs. Our Quick elivery Program ensures shipment of our in-stock products within 24 hours of placing your order. Our Quick uild made-to-order products can be produced in or 25-day production cycles, depending upon their compleity. Greenheck s free omputer ided Product Selection program (PS), rated by many as the best in the industry, helps you conveniently and efficiently select the right products for the challenge at hand. Greenheck has been Green for a long time! Our energy-saving products and ongoing corporate commitment to sustainability can help you qualify for L credits. Our 3 service allows you to download, at no charge, easy-touse utoesk Revit 3 drawings for many of our ventilation products. Find out more about these special Greenheck services at greenheck.com uilding Value in in ir ir Greenheck delivers value to mechanical engineers by helping them solve virtually any air quality challenges their clients face with a comprehensive selection of top quality, innovative airrelated equipment. We offer etra value to contractors by providing easy-to-install, competitively priced, reliable products that arrive on time. nd building owners and occupants value the energy efficiency, low maintenance and quiet dependable operation they eperience long after the construction project ends. Our ommitment s a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the Library under Warranties. Prepared to Support Green uilding fforts P.O. o 4 Schofield, WI Phone (715) greenheck.com 00.F&V.13 R opyright 201 Greenheck Fan orp.