Centrifugal Ceiling and Cabinet Exhaust Fans Models SP and CSP

Transcription

1 entrifugal eiling and abinet xhaust Fans Models SP and SP See NRGY STR Models on Pages 1-17 September 2012

2 Models SP and SP eiling and abinet xhaust Fans Standard onstruction Features Options and ccessories... SP Grill and Lighting Options ontrol ccessories...- Filter and ischarge ccessories.... Flat Roof aps Wall ischarge ccessories Sound Level Information nergy Star pproval Model Number ode Model SP Model SP- and SP Model SP Model SP Model SP (50 cycle) Model SP (50 cycle) Typical Specifications Warranty Greenheck Fan orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and M Publication 11 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Greenheck Fan orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Models SP and SP are listed electric fans (UL/cUL 507). eiling xhaust Fans are also UL Listed for above bathtub/shower with GFI branch protected circuit. File no. 5. Products that earn the NRGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. Fans that are NRGY STR qualified include: SP--50, 70, 0, 200, 250, 20 and 4 SP--50, 70, 0 and 0 2

3 Models SP and SP eiling and abinet xhaust Fans Model omparison Location Mounting irflow pplication rive Type Impeller Type Performance Model Outdoor Indoor Roof urb ase/floor Hanging Wall eiling Mounted xhaust Supply Reversible Recirculate General/lean ir ontaminated ir Spark Resistant Grease (UL 72) Smoke ontrol (UL) High Wind (150 mph) High Temp (above 200 F ) elt irect entrifugal Propeller/xial Mixed Flow Maximum Volume (cfm) Maximum Static Pressure (in. wg) Relative ost SP 1,00 1 $ SP,00 1 $ Great things come in small packages, as do our ceiling fan SP models and cabinet fan SP models. e assured when you buy any Greenheck product, you are getting a quality product at a competitive price. In fact, we guarantee our SP and SP ceiling and cabinet exhaust fans with a three-year warranty. We offer the most comprehensive ceiling and cabinet exhaust fan line in the commercial market. We are your market leader! enefits Lowest sound in the industry ompact size Five different fan styles offering you a competitive price roadest performance selections in the industry SP fans are designed d for ceiling mounted applications. SP fans are designed for inline mounted applications. eiling Fans Model escription Profile min. height SP- SP- SP- Premium eiling Fan: est choice to meet sound requirements. eluxe eiling Fan: ompact to fit most applications with quiet operation. conomy eiling Fan: esigned for light commercial applications. inches (22 mm) 7 inches (17 mm) 5 inches ( mm) Sound min. sones ir Volume (maximum) 1,00 cfm (271 m /hr) 200 cfm (40 m /hr) 50 cfm (5 m /hr) UL Listing UL/cUL Listed for above bathtub/shower with GFI branch protected circuit (Sizes 0 and smaller) UL/cUL Listed for above bathtub/shower with GFI branch protected circuit UL Listed Inline Fans SP- SP- Premium Inline Fan: Outperforms the competition and is preferred by specifying engineers. eluxe Inline Fan: ompact design to fit in small remote spaces. inches (22 mm) 7 inches (17 mm) ,775 cfm (414 m /hr) 15 cfm (14 m /hr) UL/cUL Listed UL/cUL Listed

4 Standard onstruction Features Model SP- Model SP Model SP- Model SP Model SP

5 Standard onstruction Features 1 ackdraft amper Number and escription Specific Features for ach Model SP- SP- SP- SP- SP- urable plastic to eliminate rattling & backdrafts luminium to eliminate rattling & backdrafts 2 Outlet Power ssembly 4 lectrical ccess 5 lectrical Knockouts coustic Insulation Round - For quick and easy connections Square - For quick and easy connections Removes quickly for maintenance Includes conversion from horizontal to vertical discharge Vertical electrical access to eliminate drilling holes xternal electrical access to eliminate removing motor pack, saving installation time liminates drilling holes (horizontal or vertical) bsorbs sound 7 isconnect Servicing is quick and safe lectrical Junction ox Grille Mounting rackets 11 Housing Large for easy wiring oncealed attachment screws securely fasten grille to housing for quiet, rattle free operation djustable for multiple installation conditions mbossed galvanized steel for rigidity low profile for height restricted areas 12 Motors Motors are compatible for use with speed controls and have thermal overload protection omestic & International 50 cycle, 220v or 240v 0 cycle, 115v, 20v, 220v, 20v, & 277v options (See PS for availability) 0 cycle, 115v only 1 ccess Panel xclusive lectrical Wiring Feature Gain easy access to internal components once installed lectrical access cover located on the housing exterior. This feature permits external wiring without removing the power assembly, saving installation time and cost. vailable on models SP- and SP-. ouble-wide Fans vailable for applications requiring 700 cfm or greater. ouble-wide fans have two double-width forward-curved wheels, which are housed in separate scrolls, and driven by a single motor. vailable on models SP- and SP-. Vertical ischarge xhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. vailable on models SP- and SP-. 5

6 Options and ccessories eiling Radiation amper The National Fire Protection ssociation (NFP) Standard 0 requires openings in fire rated ceiling assemblies to be protected by appropriately rated ceiling radiation dampers. s a result, many local codes require fans installed in fire rated ceilings to be protected by dampers which are insulated against both heat and flame. UL lassified ceiling radiation dampers are rated at three to four hours of fire resistance. ll model SP fans and fan/light combinations are available with ceiling radiation dampers. This design saves space by allowing the damper to mount directly beneath the fan. ontractor 4 Packs Save installation time and labor by installing the housing first, then installing the internal components after the sheetrocking, plastering and finishing is done. Housings are packaged in one box, power assemblies and grilles are packaged in another box. omponents are shipped to coincide with the phase of your project. (Model SP- only). Model SP- in. x SP- Fan Hanging Vibration Isolation eiling Radiation amper Fire Rated eiling Grille Wheel Options Greenheck s ceiling and cabinet fans (models SP and SP) deliver high performance from a forward-curved wheel. The forward-curved wheel design offers both high-efficiency and low sound. Fan wheels are constructed of polypropylene or steel as standard, and all models offer an aluminum wheel option. Level models utilize steel or polypropylene wheel construction depending on size. Model SP- SP- Fan Hanging Vibration Isolation Level models are standard with a polypropylene wheel. Polypropylene in. x eiling Radiation amper Fire Rated eiling Grille Steel SP Model R Length () Width () Height (4) 11 1 (2) (7) (5) (11) (7) (4) (7) (7) luminum (14) (11) (7) (14) (7) (7) ll dimensions shown in inches (millimeters). dd an L to all R models if fan & light combo is used. *R is approximately 1/4 inch ( mm) larger than housing dimension. (See Installation, Operation and Maintenance Manual)

7 SP Grille and Lighting Options Grille Options esigner - standard grille vailable in white polystyrene finish, with or without motion detector or time delay (see page for motion detector and time delay information). Standard on SP models 50-0 and Grille - luminum White enamel finish standard for models Optional for models 50-0 and Grille - Stainless Steel Polished stainless steel finish optional for models 50-0 and Grille - ecorative White plastic finish, with or without light, motion detector or time delay (see page for motion detector and time delay information). Optional for models 50-0 and Lighted Grille Options Greenheck s fan and light combinations include either a prismatic or a frosted lens and either compact fluorescent or incandescent lamps. Our unique light box is manufactured with a reflective material to increase the light given off by either type of lamp. UL Listed for above bathtub and showers with GFI branch protected circuit. Model SP-, sizes 50-0 Model SP-, sizes Prismatic Lens The prismatic lens design provides approximately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs. Frosted Lens The frosted lens option is a traditional design which lets approximately 0% of light through the lens. The lens may be easily removed to replace light bulbs. Incandescent Lamps One bulb provides up to 0 watts of light (bulbs provided by others). immable Reflective light box ustomized grille options Molded polystyrene available in an array of colors. Includes all the same accessory options as the standard grilles. For more information on the many ways this grille option can be used please contact your Greenheck representative. ustomized Grille Lens Lenses can be customized with formed shapes or logos. ontact your Greenheck representative for details. ompact Fluorescent Lamps (FL) Features and enefits GU24 ase Long Life,,000 hour average rated life Lower maintenance and labor costs for lamp replacements No lead glass - etter lumen maintenance over life of bulb nd-of-life logic guards against violent failures omplies with UL 1 nd-of-life requirements World lass phosphor insures high lumen output and excellent lumen maintenance Replacement bulbs can be found wherever standard light bulbs and fixtures are sold. nergy efficient NRGY STR qualified fixtures. alifornia nergy Title 24 compliant 7

8 ontrol ccessories Speed ontrols Speed controls may be used on model SP and SP fans for manual adjustment of the fan s performance (for final system balancing) or to control the fan s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 0% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Solid state speed controls are available for Internal Mounting a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if the combined total amperage of the fans do not exceed the control rating. H FULL VOLTG LK SP ONTROL R WHIT VRIL VOLTG SWITH FULL VOLTG otted line indicates for use with W switch only. UX VI Switches Switches may be used on model SP and SP fans to enable manual control of your fan or fan and light combination. There are several options to fit your application. NM 1 - Single pole rocker switch assembly. Rated for, 115v, 15 mp, 1/2 hp UL Listed Model MS-1 - Single pole rocker switch assembly with cover and pilot light. Rated for, 115v, 15 mp, 1/2 hp UL Listed NM 1 - Two pole rocker switch assembly. Rated for, 220/20/240/277v, 20 mp, 2 hp UL Listed Requires a 2x4 handy box. XTRNL JUMPR 120 V FN LO LO N For use with shaded pole and permanent split capacitor (PS) motors. vailable shipped loose or mounted internal or external. Model Voltage Rating mp Rating 5WSS v 5 mp WSS v mp 15WSS v 15 mp 5W v 5 mp WSS v mp 5W v 5 mp SP ONTROL INTRNL N/OR XTRNL MOUNTING OPTIONS Fan Sizes I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ No No No No No No No No No No No *I/ I/ No I/ I/ *I/ No I/ I/ No I/ No No I/ No I/ No I/ No No No No No No * No * No No No No No No No No No No No No No I/ I/ I/ I/ *I/ No No No No No No No No No No No No No No No = xternal mounted only I/ = vailable Internal and xternal Mounted KY: * Only available on the -series (-series is not available) No = Not available NOTS: Speed controllers are not available for 20v applications. SP-50 Speed ontroller is shipped loose only. ll speed controller options listed in table are UL Listed. Handy ox sizes are 2x4 for all options above except WSS and 15WSS, which are 4x4.

9 ontrol ccessories Time elay Switch Time delay switches save energy by automatically turning off equipment. They may be used with SP and SP fans or fan and light combinations for extended operating time of fan. Time delay switches act in the same manner as a standard switch, however, there is a delay of 1 to 0 minutes after it has been turned off. 115 VOLT 0 YL (NUTRL) (HOT) LK WHIT LU R (500 Watt Max) LIGHT (7.5 mps Max) FN MOTOR Motion etectors Motion detectors may be used with SP and SP fans or fan and light combinations. Motion detectors use a passive infrared motion detector to automatically turn the fan on when a change in motion is sensed. They have a viewing area of degrees, however they must be placed in the line-of-sight. They also have an adjustable time delay shutoff setting of 1 to 20 minutes. lack Hot Motion Sensor lack White Red Hot Model GT - single switch controls both fan and light. vailable shipped loose. Silent Operation Rated for 115v UL Listed Requires 2x4 handy box Transformers Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. ll transformers are shipped loose. Models Voltage Ratings mp Ratings T /277v to mps T-4. 20/277v to mps T-.5 20/277v to mps T-. 20/277v to 115. mps Green Gnd. Red Load (12.5 mps Max.) Wall Mount Neutral Fan Motor and/or Light lack Green White Grille Mount Grille Motion etectors are available on models up through size SP-0 and SP-200. Rated for 115v UL Listed Model MW For use on fan or lights. vailable shipped loose. Rated for 115v UL Listed Requires 2x4 handy box Neutral Ground

10 Filters and ischarge ccessories Filters Fans used in most applications will collect airborne dirt on wheels and motors over time, even where air is not excessively dirty. ccumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. irt buildup on the motor can cause it to overheat. ll of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to trap dirt before it enters the fan. These filters should be regularly cleaned to maintain performance. The Filter Loss hart shows the effect the filter will have on performance. To determine the added resistance, divide the desired cfm by the filter area (ft 2 ). This will give ft/min. Use this with the filter loss chart to get the added resistance. Filters reduce sound levels, in addition to reducing dirt accumulations on the motor and wheel. Roof ischarge ccessories Model RJ - Pitched Roof ap Steel construction with black enamel finish Integral flashing flange uilt-in birdscreen and damper R RJ-4 and RJ-x RJ-x Mesh Filter Resistance in w.c SP Grille Velocity (FPM) x 0 Model Use for sizes: Throat RJ-4 RJ-x 50, , 50-0 RJ-x 4-50 Model L-x - lbow ischarge with Grille esigned for installation under roof eaves lack epoxy finish (elbow and grille) uilt-in damper For model SP and SP sizes (27) 1 4 (47) (470) 1 4 (25) (2) () 1 4 (2) () 15 4 (400) ll dimensions shown in inches (millimeters)..5 () (254) (15) (24) 2 5 (00) (114) 1 2 (15) 1 2 (241) (2) 4 (2) diameter x (152 x 22) x (254 x 254) SP Model Filter Loss hart Filter Model esigner Grille *Metal Grille Filter rea (ft 2 ) SP F-200 F SP , F-200 F (7).5 (15) 1.25 (42).75 ().75 (2) SP-4-5 SP-7-70 N F SP N F *luminium or Stainless Steel Grille (10) 11.5 (22) ll dimensions shown in inches (millimeters).

11 Flat Roof aps Model R-7 - urb ap Weathertight aluminum construction Integral birdscreen uilt-in curb cap Requires roof curb Model For all sizes: Model GRS - urb ap ll aluminum exterior construction Galvanized steel internal supports Integral birdscreen uilt-in curb cap Requires roof curb ia. ia. 1.5 () Throat ia. R (1) 12 (05) (254) (12) 7 (17) ll dimensions shown in inches (millimeters). Model For all sizes: 1.75 (44) Throat ia. GRS (4) (521) 7 4 (17) 2 (51) 1 4 (20) GRS (55) 2 (77) (254) 1 2 () (11) GRS (0) 2 (77) 11 (27) () (414) GRS (72) (02) (2) 4 (5) (51) ll dimensions shown in inches (millimeters). Model GRSF - Flashing Flange ll aluminum exterior construction Galvanized steel internal supports Integral birdscreen uilt-in flashing flange Model For all sizes: Hanging Vibration Isolators Vibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the exception of 1/4-20 threaded rod to be supplied by others. Fan mounting brackets include prepunched mounting holes for ease of installation. 1/4-20 hanging support rod by others ia. Throat ia. GRSF (54) (521) 7 4 (17) 2 (51) 1 4 (20) GRSF (0) 2 (77) (254) 1 2 () (11) GRSF (72) 2 (77) 11 (27) () (414) GRSF (4) (02) (2) 4 (5) (51) ll dimensions shown in inches (millimeters). Model RF-7 - Flashing Flange Weathertight aluminum construction Integral birdscreen uilt-in flashing flange Model For all sizes: ia. Throat ia. RF (457) 12 (05) (254) (12) 7 (17) ll dimensions shown in inches (millimeters). Unit Size (114) 15 5 (7) (140) 14 5 (71) (171) (4) 4, 5, 7, (25) 1 5 (4) (140) 25 1 () 00-50, (25) 25 (45) 1750, (25) 4 () (25) 4 5 (125) ll dimensions shown in inches (millimeters). 11

12 Wall ischarge ccessories Model W (Round onnection) - Hooded Wall ap luminum construction - aluminum finish For outside wall applications uilt-in birdscreen (not available on W-4) and damper Model R - Round uct onnector Replaces the standard square discharge duct-connector and damper Uses existing mounting holes R- includes a damper (polypropylene construction) R- does not R- include a damper (galvanized construction) Model Use with sizes: W-4 W- W , (15) 11 (27) 11 (27) ll dimensions shown in inches (millimeters). 4 (2) 2 4 (70) 4 1 (5) 5 1 (10) Model WL - Wall Louvred ischarge 5 (127) 5 (127) 1 2 () nodized aluminum grille uilt-in damper Not recommended for exterior applications exposed to severe weather conditions. n external wall louver is recommended for such applications. Model Use with sizes: iameter R R ll dimensions shown in inches (millimeters). x4 - Transition uct Reducer Reduces duct from to 4 inches. urable plastic construction 5 /2 (157) 4 15 /1 (157) 4 15 /2 (114) Model Use with all sizes: Model For use with sizes: * ll dimensions shown in inches (millimeters). * Used in conjunction with R- WL-x (05) (1) (254) 7 4 (17) 1 2 () WL-1x (502) 1 (457) (22) ll dimensions shown in inches (millimeters). 12

13 Wall ischarge ccessories Model W - Hooded Wall ap (Square or Rectangular onnections) Steel construction with black enamel finish For outside wall applications uilt-in birdscreen and damper ccessory Pressure rops The chart below can be used with all of the discharge accessories shown on these two pages. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection. G F 0 20 WL-1x Model Use with all sizes: W-x F G (140) 12 4 (24) 1 2 () 1 4 (20) 11 1 (2) () 5 (127) Volume (cfm x 0) RJ-x V-157, W-1x V-12, W-x W- W-x, W-, RJ-x, L-x, WL-x, V-0, RF-7, R-7 W-x (20) 1 4 (20) 1 4 (2) 1 4 (2) 1 4 (2) 4 (171) 5 (127) W-1x (20) (514) 1 4 (2) ll dimensions shown in inches (millimeters) (44) (44) 4 (171) 5 (127) Pressure rop (Inches wg) bove accessories tested with 4 feet of inlet duct Model V - rick Vent esigned for installation in masonry walls nodized aluminum construction uilt-in aluminum mesh insect screen Model Use with all sizes: V V V (20) 12 (05) 15 5 (7) ll dimensions shown in inches (millimeters). 7 4 (17) 7 4 (17) 7 4 (17) 4 (2) 4 (2) 4 (2) 1

14 Things to know when sound is critical Sound ata The sound data shown in this catalog has been presented to aid the system designer in selecting a fan which will meet the desired sound criteria. Sone levels have been included on the performance pages to provide a means of quickly evaluating the relative loudness of a fan selection. What is a sone? Sones are an internationally recognized unit of loudness. In practical terms, the loudness of one sone is equivalent to the sound of a quiet refrigerator measured from five feet away in an acoustically average room. sone is a single number rating, which indicates the inlet noise derived from the eight audible octave bands. Sones are a linear measurement of sound level. For example, a sound level of sones is twice as loud as 5 sones. insulated housings and vibration isolators between the motor and housing contribute to quiet, efficient operation. pplied and installed as recommended, SP and SP sound levels will fall well within the ranges shown in the Suggested Limits for Room Loudness chart. For applications where sound levels are critical, a remote mounted SP with ductboard is recommended. Placement of SP and SP fans should take into account the desired sound level at the location of the listener. The compact size of the SP and SP fans provides the system designer greater flexibility in locating these fans for lowest sound levels. In critical sound areas, insulated ductwork, flexible duct connections, or placing the fan in a remote section of the ductwork (away from the critical area) offers the best means of meeting desired sound levels. an radiated noise increase the sound levels? Radiated noise from fan housings can cause unacceptable sound levels, on any brand of fan. The size of these fans allows them to be placed in areas where this noise will be transmitted to the conditioned space through walls or ceilings. Where possible, cabinet fans should be located in remote parts of the ventilation system. When should a SP or SP fan be used? Model SP and SP fans are designed for the lowest possible sound levels. Forward-curved wheels, Fiberglass Model SP mounted directly overhead may be too loud for sound critical applications. Remote mounted model SP with vibration isolators and insulated ductwork provides the quietest installation. Suggested Limits for Room Loudness Sones Private homes (rural and suburban) onference rooms Hotel rooms, libraries, movie theatres, executive offices Schools and classrooms, hospital wards and operating rooms ourt rooms, museums, apartment houses, private homes (urban) Restaurants, lobbies, general open offices, banks orridors and halls, cocktail lounges, washrooms and toilets Hotel kitchens and laundries, supermarkets Reprinted from M Publication 02 (pplication of Sone Ratings for Non-ducted ir Moving evices, with room sone d correlations) with the written permission from the M International, Inc., 0 West University rive, rlington Heights, IL NOT: Values above are for room loudness and are not sound ratings. Room loudness is the resulting level in a conditioned space after the acoustical qualities of the room have been accounted for. When room sound levels are critical, such as in executive offices, conference rooms, hospital operating rooms, and school study areas, a SP fan is the best choice. Shown here is a comparison of SP and SP fans of the same size, with equal performance in typical installations. The SP shows lower sone values. Model FM WG FRPM Sones SP / 00.0 SP / *Sone value with insulated inlet duct. 14

15 Variable Volume What is NRGY STR? NRGY STR is the trusted, government-backed symbol for energy efficiency helping us all save money and protect the environment through energy-efficient products and practices. The NRGY STR label was established to: Reduce greenhouse gas emissions and other pollutants caused by the inefficient use of energy; and Make it easy for consumers to identify and purchase energy-efficient products that offer savings on energy bills without sacrificing performance, features, and comfort. For a ventilation fan to achieve NRGY STR approval it must meet strict efficiency standards for both sound and performance. y using Greenheck model SP NRGY STR qualified fans you are helping to provide an energy efficient alternative that helps save money and resources. See pages 1 and 17 for NRGY STR qualified models. More information on the certification process and a complete list of qualified products can be found on the NRGY STR website ( Products that earn the NRGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. Model Number ode The model number code system is designed to completely identify the fan. The correct code letters must be specified to designate belt or direct drive. The remainder of the model code is determined by the size and performance. SP - 50 FL Light Options: L - Fan/Light (Incandescent) ombination FL - Fan/Light (Fluorescent) ombination Nominal cfm at 0. inches static pressure Level of onstruction: - Premium unit; lowest sound, insulated housing - eluxe unit; low sound, low profile - Standard unit; lowest profile, inexpensive Model: SP - Silent Partner SP - abinet Silent Partner 15

16 Model SP- Premium eiling Fan 1 Model SP- imensions Model 50, 70, 0 1, 125, , 250, 20, 0 4, , 70 00, 50, 14, (7) (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 5 (270) 5 (270) 11 7 (02) 14 (5) 11 5 (25) 14 (5) 14 (5) (22) (22) (2) () 11 5 (25) () () (45) (254) 1 4 (47) esigner Grille* 14 7 x (7 x 7) 1 x 1 (42 x 41) 25 1 x ( x 4) 1 x 1 (42 x 41) 25 x 1 (5 x 41) ecorative Grille (7) sq. ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. * Sizes 4 and larger have an aluminum grille as standard. *Note: mp draw is approximate and may vary based on motor manufacturer. Model nergy Star RPM mps* Watts SP-50 2,, SP-70 2,, SP-0 2,, SP-1 2,, 4, 5, SP-125 2,, 5, SP-10 2,, 4, 5, SP-200 2,, SP-250 2,, SP-20 2,, 4, SP-0 2,, 4, SP SP-5, SP SP SP-70, SP SP-50, SP SP-1550, vailable with light vailable with R - eiling Radiation amper 4 lso available with 50 Hz motors (See page 20 for performance) Unit Weight 12 (5) 17 () 24 (11) 1 (14) 4 (15) 4 (15) 5 (25) FM / Static Pressure in Inches wg FM Sones FM Sones FM Sones FM 11 1 Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones UL Listed for use above tubs. vailable with 277 volt motor. Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. SP SP- 700, /1 SP- 1-5, 7, 70

17 Model SP- and SP- eluxe and Standard eiling Fan Model SP- imensions Model * 50, 70 & 0 0, 1, 150, (52) 1 7 (52) (22) (22) 7 (17) 7 (17) esigner Grille ecorative Grille (2) 14 7 x (7 x 7) (7) sq (2) Unit Weight (4) (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). *dd 1½ in. ( mm) to dimension for incandescent light. Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. *Note: mp draw is approximate and may vary based on motor manufacturer. Model nergy Star RPM mps* Watts SP-50 2,, SP-70 2,, SP-0 2,, SP-0 2,, 4, SP-1 2,, 4, 5, SP-150 2,, 4, 5, SP-200, 4, 5, vailable with light vailable with R - eiling Radiation amper 4 lso available with 50 Hz motors (See page 20 for performance) FM / Static Pressure in Inches wg FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones UL Listed for use above tubs. vailable with 277 volt motor. Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. Model SP- imensions Model F (11) (11) 5 (2) (7) 1 5 (41) 1/2 (1) ecorative Grille 1 4 x (25 x 22) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). For complete dimensional information, see PS submittal drawings. Unit Weight 5 (2) F *Note: mp draw is approximate and may vary based on motor manufacturer. Model RPM mps* Watts SP FM / Static Pressure in Inches wg FM Sones Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. 17

18 Model SP- Premium Inline Fan 1 Model SP- imensions Model F G 1, 125, , 250, 20, 0 4, , 70 00, 50, 14, , (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 5 () (115) 5 (270) 11 7 (02) 14 (5) 11 5 (25) 14 (5) 14 (5) 14 4 (75) (41) (22) (2) () 11 5 (25) () () 14 4 (75) (41) (45) (254) 1 4 (47) 2 (711) 40 (1) 11 (27) 12 (05) 12 7 (27) 1 7 (42) 22 5 (575) 1 7 (42) 22 5 (575) 2 4 (2) () 1 4 (25) (254) (7) 1 2 (27) (7) (7) 1 (0) 14 5 (71) Unit Weight 1 (7) 2 () (1) 4 (15) (1) 5 (27) (1) 122 (55) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. *Note: mp draw is approximate and may vary based on motor manufacturer. Model RPM mps* Watts FM / Static Pressure in Inches wg SP FM Sones SP FM Sones SP-10 4, FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones SP FM Sones Units also available with 50 Hz motors (See page 21 for performance) vailable with 277 volt motor. Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on ft of insulated duct. The M ertified Ratings Seal applies to air performance ratings only. G G F F Inlet SP-1-5 SP

19 Model SP- eluxe Inline Fan Model SP- imensions Model F G 1, 150, (52) (22) 7 (17) (2) (20) 1 4 () Unit Weight 1 4 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. Inlet FxG - diameter *Note: mp draw is approximate and may vary based on motor manufacturer. Model RPM mps* Watts SP-1 4, SP-150 4, SP-200 4, Units also available with 50 Hz motors (See page 21 for performance) FM / Static Pressure in Inches wg FM Sones FM Sones FM Sones vailable with 277 volt motor. Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on ft of insulated duct. The M ertified Ratings Seal applies to air performance ratings only. 1

20 Model SP 50 ycle Performance For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for ceiling mounted exhaust fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs Full-line of grille and discharge accessories available SP- 1-5, 7, 70 SP /1 Model SP imensions SP- 50, 70, 0 1, 125, , 250, 20, 0 4, 5 7, 70 00, 50, 14, (7) (7) 14 (5) 1 (457) 1 (457) 2 4 (0) 5 (270) 5 (270) 11 7 (02) 14 (5) 14 (5) 14 (5) (22) (22) (2) () () () (254) 1 4 (47) esigner Grille* 14 7 x (7 x 7) 1 x 1 (42 x 41) 1 x 1 (42 x 41) 25 x 1 (5 x 41) Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). SP- esigner Grille ecorative Grille (7) square ecorative Grille Unit Weight 12 (5) 17 () 24 (11) 1 (14) 4 (15) 5 (25) Unit Weight 50, 70 & x (52) (22) (17) (2) (7 x 7) (7) (4) 0, 1, 150, x square 200 (52) (22) (2) (7 x 7) (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). *dd 1½ in. ( mm) to dimension for incandescent light. Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. *Sizes 4 and larger have an aluminum grille as standard. SP- (double-wide) 700, SP *Note: mp draw is approximate and may vary based on motor manufacturer. 20 Model RPM mps* Watts FM / Static Pressure in Inches of wg SP-1 FM Sones SP-10 FM Sones SP-20 FM Sones SP-0 FM Sones SP-5 FM Sones SP-70 FM Sones SP-50 FM Sones SP-1550 FM Sones SP-0 FM Sones SP-1 FM Sones SP-150 FM Sones SP-200 FM Sones Model SP with 50 hertz motor is not M certified or NRGY STR qualified.

21 Model SP 50 ycle Performance For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for inline cabinet fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs Full line of discharge accessories available SP- 1-5, 7, 70 F G Model SP imensions SP- F G 1, 125, , 250, 20, 0 4, , 70 00, 50, 14, , (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 5 () (115) 5 (270) 11 7 (02) 14 (5) 11 5 (25) 14 (5) 14 (5) 14 4 (75) (41) (22) (2) () 11 5 (25) () () 14 4 (75) (41) (45) (254) 1 4 (47) 2 (711) 40 (1) 11 (27) 12 (05) 12 7 (27) 1 7 (42) 22 5 (575) 1 7 (42) 22 5 (575) 2 4 (2) () (25) (254) (7) 1 2 (27) (7) (7) 1 (0) 14 5 (71) SP- F G 1, 150, (52) (22) 7 (17) (2) 1 4 (20) 1 4 () Unit Weight 1 (7) 2 () (1) 4 (15) (1) 5 (27) (1) 122 (55) Unit Weight 1 4 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. G Inlet FxG SP- (double wide) 700, F Inlet SP- - diameter *Note: mp draw is approximate and may vary based on motor manufacturer. Model RPM mps* Watts SP-1 SP-10 SP-0 SP-70 SP-50 SP-1550 SP-1 SP-150 SP Model SP with 50 hertz motor is not M certified or NRGY STR qualified. FM / Static Pressure in Inches of wg FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones

22 Model SP Specifications Models SP-50, 70, 0, 0, 1, 150, and 200 Models SP-50 thru 1550 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 1/2 inch (1 mm) acoustical insulation. The outlet duct collar shall include a polypropylene backdraft damper on SP-50-0 and a spring loaded aluminum backdraft damper on SP-1 and larger. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-50 through SP-0 shall be constructed of high-impact polystyrene and for sizes SP-4 through SP-1550, the grille shall be constructed of aluminum. Grilles shall be non-yellowing. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified or NRGY STR qualified. eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be inches (152 mm) in diameter and shall include a backdraft damper. The designer grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP-50, 70, 0, 0, 1, 150 or 200 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified or NRGY STR qualified. Model SP-50 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be a sleeve for ease of connection to inch (7 mm) and 4 inch (2 mm) round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with torsion springs. The wheels shall be constructed of high-strength polymer. The access for wiring shall be easily accessible internally. The motor disconnect shall be internal and of the plug-in type. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal. Model SP-50 shall be UL Listed. Fans shall be model SP-50 as supplied by Greenheck Fan orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified or NRGY STR qualified. omplete specifications, in onstruction Specifications Institute (SI) format, are available on greenheck.com. 22

23 Model SP Specifications Models SP-1 thru 00 uct-mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 1/2 inch (1 mm) acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper and shall be adaptable for horizontal or vertical discharge. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance seal and shall be UL/ cul Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified or NRGY STR qualified. Models SP-1, 150 and 200 uct-mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be inch (152 mm) in diameter to accept -inch (152 mm) round ductwork and shall include a backdraft damper. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP-1, 150 or 200 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified or NRGY STR qualified. omplete specifications, in onstruction Specifications Institute (SI) format, are available on greenheck.com. 2

24 NRGY STR Qualified SP Fans NRGY STR qualified Greenheck SP fans provide an energy efficient alternative to help save money and resources. See Pages 1 and 17 for specific model selections. SP- Models SP- Models uilding Value in ir Greenheck delivers value to mechanical engineers by helping them solve virtually any air quality challenges their clients face with a comprehensive selection of top quality, innovative airrelated equipment. We offer extra value to contractors by providing easy-to-install, competitively priced, reliable products that arrive on time. nd building owners and occupants value the energy efficiency, low maintenance and quiet dependable operation they experience long after the construction project ends. Our ommitment s a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the Library under Warranties. Prepared to Support Green uilding fforts P.O. ox 4 Schofield, WI Phone (715) greenheck.com 00.F&V.1 R SN opyright 2012 Greenheck Fan orp.