Centrifugal Ceiling Exhaust and Inline Cabinet Fans Models SP and CSP

Transcription

1 entrifugal eiling xhaust and Inline abinet Fans s SP and SP See NRGY STR s on Pages -12 November 2017

2 s SP and SP eiling and abinet Fans Great things come in small packages, as do our SP ceiling exhaust fan and SP inline cabinet fan models. e assured when you buy any Greenheck product, it is a quality product at a competitive price. Plus, we guarantee our SP and SP fans with a three-year warranty. We are your market leader for the most comprehensive ceiling and cabinet fan line in the market. Typical Installations Multifamily housing Hotels Hospitals Schools athrooms Storage rooms enefits Low sound levels ompact size Wide range of performance vailable with motors for higher efficiency and more controllability Table of ontents Standard onstruction Features Power Ratings... ertifications... Vari-Green Motors and ontrols... 7 Sound and Fan Selection.... NRGY STR pproval Number ode... SP-VG... SP SP- and SP SP SP SP (50 cycle) SP (50 cycle) ccessories lectrical ccessories ischarge ccessories Pressure rop Specifications Vari-Green Specifications

3 s SP and SP eiling and abinet Fans omparison Location Mounting irflow pplication rive Type Impeller Type Performance Outdoor Indoor Roof urb ase/floor Hanging Wall eiling Mounted xhaust Supply Reversible Recirculate General/lean ir ontaminated ir Spark Resistant Grease (UL 72) Smoke ontrol (UL) High Wind (150 mph) High Temp (above 200 F ) elt irect entrifugal Propeller/xial Mixed Flow Maximum Volume (cfm) Maximum Static Pressure (in. wg) SP 1,00 1 SP,00 1 SP fans are designed d for ceiling mounted exhaust applications. SP fans are designed for inline supply or exhaust applications. eiling Fans Inline Fans SP SP SP SP SP SP Level of onstruction VG ll dimensions are in inches (millimeters) escription Premium Plus: Green/energy efficient highest performing Premium eiling Fan: Widest selection to meet sound requirements. eluxe eiling Fan: ompact to fit most applications with quiet operation. conomy eiling Fan: esigned for light commercial applications. Premium Inline Fan: Outperforms the competition and is preferred by specifying engineers. eluxe Inline Fan: ompact design to fit in small remote spaces. Profile min. height 7 inches (17 mm) inches (22 mm) 7 inches (17 mm) 5 inches ( mm) inches (22 mm) 7 inches (17 mm) Sound min. sones <0. < ir Volume max. cfm 7 cfm (120 m /hr) 1,00 cfm (271 m /hr) 200 cfm (40 m /hr) 50 cfm (5 m /hr),775 cfm (414 m /hr) 15 cfm (14 m /hr) UL Listing UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit (Sizes 0 and smaller) UL/cUL Listed for above bathtub/ shower with GFI branch protected circuit UL Listed UL/cUL Listed UL/cUL Listed

4 Standard onstruction Features SP- SP SP SP SP- SP-VG

5 Standard onstruction Features 1 ackdraft amper 2 Outlet Power Pack 4 lectrical ccess 5 lectrical Knockouts coustic Insulation Number and escription Specific Features for ach SP-VG SP- SP- SP- SP- SP- Square - For quick and easy connections urable plastic to reduce backdrafts 50-0 luminum to reduce backdrafts Round - For quick and easy connections Removes quickly for maintenance Includes conversion from horizontal to vertical discharge Vertical electrical access to eliminate drilling holes xternal electrical access to save installation time liminates drilling holes (horizontal or vertical) bsorbs sound 7 isconnect Servicing is quick and safe lectrical Junction ox Mounting rackets 11 Housing Large for easy wiring oncealed attachment screws securely fasten grille to housing for quiet, rattle free operation djustable for multiple installation conditions mbossed galvanized steel for rigidity low profile for height restricted areas 12 Motors Motors are compatible for use with speed controls and have thermal overload protection omestic & International 50 cycle, 220v or 240v 0 cycle, 115v, 20v, 220v, 20v, & 277v options (See PS or pg. 12 for availability) 0 cycle, 115v only 0 cycle, 115v only 1 ccess Panel xclusive lectrical Wiring Feature Gain easy access to internal components once installed lectrical access cover located on the housing exterior. This feature permits external wiring without removing the power assembly, saving installation time and cost. vailable on models SP- and SP-. ouble-wide Fans vailable for applications requiring 700 cfm or greater. ouble-wide fans have two double-width forward-curved wheels, which are housed in separate scrolls and driven by a single motor. vailable on models SP- and SP-. Vertical ischarge xhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. vailable on SP- and SP- models. 5

6 Power Ratings s vailable (X) vailable Motor Voltage and ycle Ratings Power Rating V/Hz 115V/ 0Hz 115V/ 50Hz V/ 50Hz V/ 0Hz 277V Vari-Green Motor Option SP-50 x SP-70 x SP-0 x SP-1 x x x x x SP-125 x x SP-10 x x x x x SP-200 x SP-250 x SP-20 x x x x SP-0 x x x x SP-4 x SP-5 x x x x x SP-700 x SP-7 x x SP-70 x x x x SP-00 x SP-50 x x x x SP-14 x SP-1550 x x x x SP-50 x SP-70 x SP-0 x SP-0 x x x x SP-1 x x x x x SP-150 x x x x x SP-200 x x x x x s vailable (X) vailable Motor Voltage and ycle Ratings Power Rating V/Hz 115V/ 0Hz 115V/ 50Hz V/ 50Hz V/ 0Hz 277V Vari-Green Motor Option SP-50 x SP-0 x x SP-0L x x SP-1 x x SP-1L x x SP-1 x x x x x SP-125 x x SP-10 x x x x x SP-200 x SP-250 x SP-20 x x x SP-0 x x x x SP-4 x SP-5 x x x x SP-700 x SP-7 x x SP-70 x x x x SP-00 x SP-50 x x x x SP-14 x SP-1550 x x x x SP-1750 x SP-2150 x SP-00 x x x SP-1 x x x x x SP-150 x x x x x SP-200 x x x x x Greenheck Fan orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and M Publication 11 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Greenheck Fan orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Products that earn the NRGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. Fans that are NRGY STR qualified include: SP-70, SP-0, SP-1, SP-125, SP-10, SP-200, SP-250, SP-70, SP-0, SP-0, SP-0-VG, SP-0L-VG, SP-1-VG and SP-1L-VG. s SP and SP are listed electric fans (UL/cUL 507). eiling xhaust Fans are also UL Listed for above bathtub/ shower with GFI branch protected circuit. File no. 5. Note: SP/SP fans are rated for direct contact with insulation

7 Vari-Green Motor & ontrols Vari-Green ontrols Vari-Green Motor Motor Technology Information & dvantages - Greenheck s lectronically ommutated () Vari-Green (VG) motor combines motor technology, controllability and energy-efficiency into one single low maintenance unit and is the industry's first fully controllable motor. The motor operates on power that is converted to providing a more efficient motor operation as compared to an operation. ontrollability allows for variable volume systems that save conditioned air from being exhausted when it is not needed and helps prevent over or under ventilating the space. vailable Vari-Green ontrols and s ontrols SP- 0(L)-VG SP- 1(L)-VG s SP/SP- 5-VG SP/SP- 7-VG VO X X Temp./Humidity X X Two-speed X X Remote ial X X Touch Remote X X onstant Pressure X X Transformer X X uilt-in Time elay X X uilt-in Two Speed X X See Greenheck's Vari-Green Motor and Vari-Green ontrols brochures for more information. ir Quality VO - ontrol a Vari-Green motor via changes in Volatile Organic ompounds (VO s). VO s are gasses that are emitted from humans, building materials, perfumes, foods, and furniture off-gassing. Range is O 2 ppm equivalent. Institutional facilities Schools, court houses, hospitals; bathrooms, waiting rooms, cafeterias. ommercial buildings Office spaces, conference rooms, bathrooms, break rooms. ir Quality Temperature and Humidity - ontrol Vari-Green motor via changes in temperature, humidity, or both. Range is 2 to 120 F (0-4 ) and 0 to 0% relative humidity. Multifamily structures partments, condos, hotels; bathrooms, utility rooms. ommercial buildings Office buildings; office spaces, conference rooms, utility rooms, bathrooms. Transformer - Provides 24V power from the existing line voltage at the fan to the Vari-Green motor and controls. ual voltage primary (120/240V) transformer provided with the fan. Remote ial or Touch Remote - allows the user to manually adjust a fan s speed from a remote location and mounts to a wall using a 2x4 junction box. The 24V transformer, described above, is included with all orders. wall cover plate is supplied. The Touch Remote includes a count down timer to automatically turn the fan off after, 0, 0 or 0 minutes. Recommended for use in commercial buildings and restaurants. Two-speed ontrol with Integral Transformer - ontrol allows motor RPM to be set at two independent speeds (high or low). Meets minimum airflow requirements with the ability to bump up to high speed in an emergency or meet maximum airflow requirements, or reset to low for energy conservation. onstant Pressure ontrol - ontrol Vari-Green motors via static (variable volume) or velocity (constant FM) pressure on the inlet or outlet side of the fan. Optional, one or two, duct or room probes for use in: Multifamily structures - partments, condos, hotels; dryers, residential kitchens and bathrooms. Institutional facilities - Schools, prisons, multistory office buildings; bathrooms. 7

8 Sound and Fan Selection Things to know when sound is critical Sound ata The sound data shown in this catalog has been presented to aid the system designer in selecting a fan which will meet the desired sound criteria. Sone levels have been included on the performance pages to provide a means of quickly evaluating the relative loudness of a fan selection. What is a sone? Sones are an internationally recognized unit of loudness. In practical terms, the loudness of one sone is equivalent to the sound of a quiet refrigerator measured from five feet away in an acoustically average room. sone is a single number rating, which indicates the inlet noise derived from the eight audible octave bands. Sones are a linear measurement of sound level. For example, a sound level of sones is twice as loud as 5 sones. the motor and housing contribute to quiet, efficient operation. pplied and installed as recommended, SP and SP sound levels will fall well within the ranges shown in the Suggested Limits for Room Loudness chart (shown below). For applications where sound levels are critical, a remote mounted SP with ductboard is recommended. Placement of SP and SP fans should take into account the desired sound level at the location of the listener. The compact size of the SP and SP fans provides the system designer greater flexibility in locating these fans for lowest sound levels. In critical sound areas, insulated ductwork, flexible duct connections, or placing the fan in a remote section of the ductwork (away from the critical sound area) offers the best means of meeting desired sound levels. an radiated noise increase the sound levels? Radiated noise from fan housings can cause unacceptable sound levels on any brand of fan. The size of these fans allows them to be placed in areas where this noise will be transmitted to the conditioned space through walls or ceilings. Where possible, cabinet fans should be located in remote parts of the ventilation system. When should an SP or SP fan be used? SP and SP fans are designed for the lowest possible sound levels. Forward-curved wheels, optional insulated housings and vibration isolators between Fiberglass Remote mounted model SP with vibration isolators and insulated ductwork provides the quietest installation. Suggested Limits for Room Loudness Sones d Private homes (rural and suburban) onference rooms Hotel rooms, libraries, movie theatres, executive offices Schools and classrooms, hospital wards and operating rooms ourt rooms, museums, apartment houses, private homes (urban) Restaurants, lobbies, general open offices, banks orridors and halls, cocktail lounges, washrooms and toilets Hotel kitchens and laundries, supermarkets Reprinted from M Publication 02 pplication of Sone Ratings for Non-ucted ir Moving evices (with room, sone and d correlations) with the written permission from M International, Inc., 0 West University rive, rlington Heights, IL When room sound levels are critical, such as in executive offices, conference rooms, hospital operating rooms, and school study areas, a SP fan is the best choice. Shown here is a comparison of SP and SP fans of the same size, with equal performance in typical installations. The SP shows lower sone values. FM Inches WG FRPM Sones SP / 00.0 SP / *Sone value on SP is with insulated inlet duct. NOT: Values above are for room loudness and are not sound ratings. Room loudness is the resulting level in a conditioned space after the acoustical qualities of the room have been accounted for.

9 NRGY STR NRGY STR is a market-based partnership formed to reduce greenhouse gas emissions through energy efficiency and make it easier for consumers to identify energy-efficient products that offer savings, performance, features, and comfort. To earn the NRGY STR label, products must meet strict energy efficiency standards set by the U.S. nvironmental Protection gency (P) for energy consumption, air and sound performance. Fan models that are NRGY STR qualified are identified in this catalog. Note: nergy Star is only for products 500 cfm or less. Products that earn the NRGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. Fans that are NRGY STR qualified include: SP-70, SP-0, SP-1, SP-125, SP-10, SP-200, SP-250, SP-70, SP-0, SP-0, SP-0-VG, SP-0L-VG, SP-1-VG and SP-1L-VG. Number ode The model number code system is designed to completely identify the fan. The correct code letters must be specified to designate belt or direct drive. The remainder of the model code is determined by the size and performance. SP - 50 FL - VG Vari-Green : Motor Option Light Options: L - Fan/Light (Incandescent) ombination FL - Fan/Light (Fluorescent) ombination Nominal FM at 0. inches static pressure Level of onstruction: - Premium unit; lowest sound, insulated housing - eluxe unit; low sound, low profile - Standard unit; lowest profile, inexpensive - No letter designation identifies model as Premium Plus with a Vari-Green motor. : SP - Silent Partner SP - abinet Silent Partner

10 SP-VG and SP- Premium Plus and Premium eiling xhaust Fan SP-VG SP-VG imensions 0(L), 1(L) 11 (2) 1 2 (27) 7 5 (14) 4 (2) esigner * 14 7 x (7 x 7) ecorative (7) square ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. Unit Weight 12 (5) SP-VG 0, 1 *mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. SP-VG Performance NRGY STR RPM mps* Max. Input Watts SP-0(L)-VG SP-1(L)-VG FM / Static Pressure in Inches wg FM Sones <0. <0. < FM Sones <0. <0. < Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. SP- SP- imensions 50, 70, 0 1, 125, , 250, 20, 0 4, , 70 00, 50, 14, (7) (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 5 (270) 5 (270) 11 7 (02) 14 (5) 11 5 (25) 14 (5) 14 (5) (22) (22) (2) () 11 5 (25) () () (45) (254) 17 7 /1 (44) esigner 14 7 x (7 x 7) 1 x 1 (42 x 41) 25 1 x ( x 4) 1 x 1 (42 x 41) 25 x 1 (5 x 41) ecorative (7) sq. ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. Unit Weight 12 (5) 17 () 24 (11) 1 (14) 4 (15) 4 (15) 5 (25) SP SP- 1-5, 7, 70 SP- 700,

11 SP- Premium eiling xhaust Fan *mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. SP- Performance NRGY STR RPM mps* Max. Input Watts* SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP FM / Static Pressure in Inches wg FM 1 1 Sones FM Sones <0. <0. <0. <0. FM/Watt* Watts* FM Sones <0. <0. < FM/Watt* Watts* FM Sones <0. <0. < FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. 11

12 SP- and SP- eluxe and Standard eiling xhaust Fan SP- SP- imensions * esigner ecorative Unit Weight 50, 70 & 0 0, 1, 150, (52) 1 7 (52) (22) (22) 7 (17) 7 (17) (2) 14 7 x (7 x 7) (7) sq (2) (4) (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). *dd 1½ in. ( mm) to dimension for incandescent light. Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. *mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. NRGY STR RPM mps* Max. Input Watts* SP SP SP SP SP SP SP FM / Static Pressure in Inches wg FM Sones FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM/Watt* Watts* FM Sones FM Sones FM Sones Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. SP- SP- imensions F (11) (11) 5 (2) (7) 1 5 (41) 1/2 (1) ecorative 1 4 x (25 x 22) Unit Weight 5 (2) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). For complete dimensional information, see PS submittal drawings. F *Note: mp and watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. RPM mps* Max. Input Watts* SP FM / Static Pressure in Inches wg FM Sones Performance certified is for model SP exhaust for installation type : Free inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. 12

13 SP- and SP- eluxe Inline abinet Fan SP- SP- imensions F G 1, 150, (52) (22) 7 (17) (2) (20) 1 4 () Unit Weight 1 4 (5) Inlet FxG - diameter ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. *mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. RPM mps* Max. Input Watts* SP SP SP FM / Static Pressure in Inches wg FM Sones Watts* FM Sones Watts* FM Sones Watts* Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on ft of insulated duct. SP- Premium Inline xhaust Fan (Performance on pg 14) SP- imensions F SP-1-5, 7, 70 F G 1, 125, , 250, 20, 0 4, , 70 00, 50, 14, , (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 5 () (115) 5 (270) 11 7 (02) 14 (5) 11 5 (25) 14 (5) 14 (5) 14 4 (75) (41) (22) (2) () 11 5 (25) () () 14 4 (75) (41) (45) (254) (44) 2 (711) 40 (1) 11 (27) 12 (05) 12 7 (27) 1 7 (42) 22 5 (575) 1 7 (42) 22 5 (575) 2 4 (2) () 1 4 (25) (254) (7) 1 2 (27) (7) (7) 1 (0) 14 5 (71) Unit Weight 1 (7) 2 () (1) 4 (15) (1) 5 (27) (1) 122 (55) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. G G F Inlet SP-700,

14 SP- Premium Inline abinet Fan *mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. RPM mps* Max. Input Watts* SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP FM / Static Pressure in Inches wg FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* FM Sones Watts* Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on ft of insulated duct. 14

15 SP 50 ycle Performance For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for ceiling mounted exhaust fans model SP. SP- 1-5, 7, 70 SP Same dimensions and outlet options Performance shown in 50 cycle RPMs Full-line of grille and discharge accessories available SP imensions SP- 50, 70, 0 1, 125, , 250, 20, 0 4, 5 7, 70 00, 50, 14, (7) (7) 14 (5) 1 (457) 1 (457) 2 4 (0) 5 (270) 5 (270) 11 7 (02) 14 (5) 14 (5) 14 (5) (22) (22) (2) () () () (254) 1 4 (47) esigner 14 7 x (7 x 7) 1 x 1 (42 x 41) 1 x 1 (42 x 41) 25 x 1 (5 x 41) Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). SP- 50, 70 & 0 0, 1, 150, (52) 1 7 (52) (22) (22) 7 (17) (2) (2) esigner ecorative (7) square ecorative 14 7 x (7 x 7) (7) 14 7 x square (7 x 7) Unit Weight 12 (5) 17 () 24 (11) 1 (14) 4 (15) 5 (25) Unit Weight (4) (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. SP- (double wide) 700, SP *Note: mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. RPM mps* SP-1 SP-10 SP-20 SP-0 SP-5 SP-70 SP-50 SP-1550 SP-0 SP-1 SP-150 SP-200 Max. Input Watts* FM / Static Pressure in Inches of wg FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones

16 SP 50 ycle Performance For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for inline cabinet fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs Full line of discharge accessories available SP imensions SP- F G 1, 125, , 250, 20, 0 4, , 70 00, 50, 14, , (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 5 () (115) 5 (270) 11 7 (02) 14 (5) 11 5 (25) 14 (5) 14 (5) 14 4 (75) (41) (22) (2) () 11 5 (25) () () 14 4 (75) (41) (45) (254) 1 4 (47) 2 (711) 40 (1) 11 (27) 12 (05) 12 7 (27) 1 7 (42) 22 5 (575) 1 7 (42) 22 5 (575) 2 4 (2) () (25) (254) (7) 1 2 (27) (7) (7) 1 (0) 14 5 (71) SP- F G 1, 150, (52) (22) 7 (17) (2) 1 4 (20) 1 4 () Unit Weight 1 (7) 2 () (1) 4 (15) (1) 5 (27) (1) 122 (55) Unit Weight 1 4 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 1½ in. ( mm). For complete dimensional information, see PS submittal drawings. G G SP- 1-5, 7, 70 F SP- (double wide) 700, F Inlet SP- Inlet FxG - diameter *Note: mp and Watt draw is approximate and may vary based on motor manufacturer. elow performance is for 115V. RPM mps* SP-1 SP-10 SP-0 SP-70 SP-50 SP-1550 SP-1 SP-150 SP-200 Max Input Watts* FM / Static Pressure in Inches of wg FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones FM Sones

17 ccessories Wheel Options Greenheck s ceiling and cabinet fans (models SP and SP) deliver high performance from a forwardcurved wheel. The forward-curved wheel design offers both high-efficiency and low sound. Fan wheels are constructed of polypropylene or steel as standard, and most models offer an aluminum wheel option. Level models utilize steel or polypropylene (standard) wheel construction depending on size. Level models are standard with a polypropylene wheel. SP- Replacement Power Packs Save installation and down time by replacing the entire power pack instead of individual components. vailable as a replacement part on all current and previous SP- models. Polypropylene Steel luminum 17

18 ccessories Options esigner - standard vailable in white polystyrene finish, with or without motion detector with time delay. Standard on SP models 50-0 and luminum White enamel finish standard for models Optional for models 50-0 and Stainless Steel Polished stainless steel finish optional for models 50-0 and ecorative White plastic finish, with or without light, motion detector with time delay. Optional for models 50-0 and ustom Molded polystyrene available in an array of colors. Includes all the same accessory options as the standard grilles. For more information on the many ways this grille option can be used, please contact your Greenheck representative. Lighted Options Greenheck s fan and light combinations include either a prismatic or a frosted lens and either compact fluorescent or incandescent lamps. Our unique light box is manufactured with a reflective material to increase the light given off by either type of lamp. UL Listed for above bathtub and showers with GFI branch protected circuit. SP-, sizes 50-0 SP-, sizes Note: When selecting a lighted grille it will add height to the fan assembly. See PS drawings for exact values. Prismatic Lens The prismatic lens design provides approximately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs. Frosted Lens The frosted lens option is a traditional design which lets approximately 0% of light through the lens. The lens may be easily removed to replace light bulbs. Note: ompact Fluorescent light bulbs are NRGY STR certified. Not all fan/lighted grill options are NRGY STR certified. See PS for availability. ontractor 4 Packs Save installation time and labor by installing the housing first, then installing the internal components after sheetrocking, plastering and finishing are done. Housings are packaged in one box, power assemblies and grilles are packaged in another box. omponents are shipped to coincide with the phase of your project. ( SP- only). ustomized Lens Lenses can be customized with formed shapes or logos. ontact your Greenheck representative for details. 1

19 ccessories Filters Fans used in most applications will collect airborne dirt on wheels and motors over time, even where air is not excessively dirty. ccumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. irt buildup on the motor can cause it to overheat. ll of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to trap dirt before it enters the fan. These filters should be regularly cleaned to maintain performance. The Filter Loss hart shows the effect the filter will have on performance. To determine the added resistance, divide the desired FM by the filter area (ft 2 ). This will give ft/min. Use this with the filter loss chart to get the added resistance. Filters reduce sound levels, in addition to reducing dirt accumulations on the motor and wheel. SP Mesh Filter SP Filter Loss hart Filter esigner *Metal Filter rea (ft 2 ) SP F-200 F SP , F-200 F SP-4-5 SP-7-70 N F SP N F *luminum or Stainless Steel. (See pg. 24 for filter loss graph) x4 - Transition uct Reducer Reduces duct from to 4 inches. urable plastic construction 15 /1 (0) 4 15 /2 (114) 5 /2 (157) Hanging Vibration Isolators Vibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the exception of 1/4-20 threaded rod to be supplied by others. Fan mounting brackets include prepunched mounting holes for ease of installation. 1/4-20 hanging support rod by others Unit Size (114) 15 5 (7) (140) 14 5 (71) (171) (4) 4, 5, 7, (25) 1 5 (4) (140) 25 1 () 00, 50, 14, (25) 25 (45) 1750, (25) 4 () (25) 4 5 (125) ll dimensions shown in inches (millimeters). R - Round uct onnector Replaces the standard square discharge ductconnector and damper Uses existing mounting holes R- includes a damper (polypropylene construction) R- does not include a damper (galvanized construction) R- R 4724 ll dimensions shown in inches (millimeters). * Used in conjunction with R- For use with sizes: * Use with sizes: iameter R R ll dimensions shown in inches (millimeters). 1

20 ccessories eiling Radiation amper The National Fire Protection ssociation (NFP) Standard 0 requires openings in fire rated ceiling assemblies to be protected by appropriately rated ceiling radiation dampers. s a result, many local codes require fans installed in fire rated ceilings to be protected by dampers which are insulated against both heat and flame. Greenheck's ceiling radiation dampers are also Warnock Hersey Listed to go into a one hour combustible (wood) installation. Greenheck's UL lassified ceiling radiation dampers are rated for three hours of fire resistance in a noncombustible installation. SP- SP- Fan Hanging Vibration Isolation RJ-4 and RJ-x RJ-x RJ - Pitched Roof ap Steel construction with black enamel finish Integral flashing flange uilt-in birdscreen and damper Use for sizes: Throat in. x eiling Radiation amper Fire Rated eiling RJ-4 RJ-x 0, 0L, 50, , 0L 0-200, 50-0 RJ-x (27) 1 4 (47) (470) 1 4 (25) (2) () 1 4 (2) () 15 4 (400) (15) (24) 2 5 (00) (114) 1 2 (15) 1 2 (241) 4 (2) diameter x (152 x 22) x (254 x 254) SP- ll dimensions shown in inches (millimeters). SP- Fan Hanging Vibration Isolation (254) (2) in. x eiling Radiation amper Fire Rated eiling.5 () 2.75 (7).5 (15) 1.25 (42).75 ().75 (2) SP R Length () Width () Height UL W.H (4) 14 (5) (4) 24 1 (14) 24 1 (14) 11 1 (2) (11) (7) (11) (7) (7) (7) (7) (7) (7) L 20 20L N 0 0 ll dimensions shown in inches (millimeters). dd an L to all R models if fan & light combo is used. *R is approximately 1/4 inch ( mm) larger than housing dimension. (See Installation, Operation and Maintenance Manual) (10) 11.5 (22) ll dimensions shown in inches (millimeters). L-x - lbow ischarge with esigned for installation under roof eaves lack epoxy finish (elbow and grille) uilt-in damper SP and SP sizes

21 lectrical ccessories ehumidistat ehumidistats are available with models SP and SP fans to ventilate humid spaces. The sensor automatically detects excess humidity and activates a ventilation fan for control of excess condensation. There are automatic, manual, or air cycle modes. This can replace a single pole switch for control of a ventilating fan. Rated for 120V,, 1/ HP UL Listed Note: ll switch covers are standard white. Other colors available upon request. Speed ontrols Speed controls may be used on model SP and SP fans for manual adjustment of the fan s performance (for final system balancing) or to control the fan s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 0% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Solid state speed controls are available for a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if the Internal Mounting combined total amperage of the fans does not exceed the control rating. Voltage Rating mp Rating WSS V mp WSS V mp 15WSS V 15 mp 5W V 5 mp WSS V mp 5W V 5 mp KY: SP ONTROL INTRNL N/OR XTRNL MOUNTING OPTIONS Fan Sizes I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ No No No No No No No No No No No *I/ I/ No I/ I/ *I/ No I/ I/ No I/ No No I/ No I/ No I/ No No No No No No * No * No No No No No No No No No No No No No I/ I/ I/ I/ *I/ No No No No No No No No No No No No No No No = xternal mounted only I/ = vailable Internal and xternal Mounted * Only available on the -series (-series is not available) No = Not available NOTS: Speed controllers are not available for 20V applications. SP-50 Speed ontroller is shipped loose only. ll speed controller options listed in table are UL Listed. Handy ox sizes are 2x4 for all options above except WSS and 15WSS, which are 4x4. 21

22 lectrical ccessories Switches Switches may be used on model SP and SP fans to enable manual control of your fan or fan and light combination. 1 Function Single pole rocker switch assembly Rated for V, 15 UL Listed 1 Function with Pilot Light Single pole light combination switch assembly Rated for 120V, 15 UL Listed 2 Function Two single pole combination switch assembly Rated for 120V, 15 UL Listed Time elay Switch Time delay switches save energy by automatically turning off the fan or fan/ light combination unit. ctivating the switch allows operation for an extended period of time. This switch includes four preset time delay settings of, 20, 0 and 0 minutes and off. This switch may be used with SP, SP or fan/light combination fans. Minimum Ventilation ontrol This control contains a microprocessor that monitors the operation of the fan to make sure that the space is receiving the correct amount of ventilation per SHR V, 2.5 UL Listed Motion etectors Motion detectors may be used with SP and SP fans or fan and light combinations. Motion detectors use a passive infrared motion detector to automatically turn the fan on when a change in motion is sensed. They have a viewing area of degrees, however they must be placed in the line-of-sight. Mounted vailable on models SP-50 through SP-0 and SP-50 through SP-200. Rated for 115V UL Listed Wall Mounted For use on fan or lights. vailable shipped loose. Rated for 115V UL Listed Requires 2x4 handy box Time delay can be set for 0 seconds to 0 minutes in 5 minute increments Transformers Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. ll transformers are shipped loose. See performance pages for motor amp ratings. Voltage Ratings mp Rating T /277V to mps T-4. 20/277V to mps T-.5 20/277V to mps T-. 20/277V to 115. mps Note: ll switch covers are standard white. Other colors available upon request. 22

23 ischarge ccessories W - Hooded Wall ap (Round onnection) luminum construction - aluminum finish For outside wall applications uilt-in birdscreen (not available on W-4) and damper W - Hooded Wall ap (Square or Rectangular onnections) Steel construction with black enamel finish For outside wall applications uilt-in birdscreen and damper G F W-4 W- W- Use with sizes , 0, 0L 50-10, 1, 1L (15) 11 (27) 11 (27) ll dimensions shown in inches (millimeters). 4 (1) 4 (1) 4 1 (5) 5 1 (10) 5 (127) 5 (127) 1 2 () Use with sizes W-x W-x F G (140) 1 4 (20) W-1x (20) 12 4 (24) 1 4 (20) (514) 1 2 () 1 4 (2) 1 4 (2) ll dimensions shown in inches (millimeters). 1 4 (20) 1 4 (2) (44) 11 1 (2) 1 4 (2) (44) () 4 (171) 4 (171) 5 (127) 5 (127) 5 (127) WL - Wall Louvered ischarge nodized aluminum grille uilt-in damper Not recommended for exterior applications exposed to severe weather conditions. n external wall louver is recommended for such applications. V - rick Vent esigned for installation in masonry walls nodized aluminum construction uilt-in aluminum mesh insect screen Use with sizes WL-x WL-1x (05) 1 4 (502) (1) ll dimensions shown in inches (millimeters). (254) 1 (457) 7 4 (17) (22) 1 2 () Use with sizes V V V (20) 12 (05) 15 5 (7) ll dimensions shown in inches (millimeters). 7 4 (17) 7 4 (17) 7 4 (17) 4 (2) 4 (2) 4 (2) 2

24 ischarge ccessories R-7 - urb ap GRS - urb ap Weathertight aluminum construction Integral birdscreen uilt-in curb cap Requires roof curb ia. 1.5 () ll aluminum exterior construction Galvanized steel internal supports Integral birdscreen uilt-in curb cap ia. Requires roof curb 1.75 (44) For all sizes: Throat ia. R (1) 12 (05) (254) (12) 7 (17) ll dimensions shown in inches (millimeters). GRSF - Flashing Flange ll aluminum exterior construction Galvanized steel internal supports Integral birdscreen uilt-in flashing flange For all sizes: Throat ia. GRSF (54) (521) 7 4 (17) 2 (51) 1 4 (20) GRSF (0) 2 (77) (254) 1 2 () (11) GRSF (72) 2 (77) 11 (27) () (414) GRSF (4) (02) (2) 4 (5) (51) ll dimensions shown in inches (millimeters). ia. For all sizes: For all sizes: Throat ia. GRS (4) (521) 7 4 (17) 2 (51) 1 4 (20) GRS (55) 2 (77) (254) 1 2 () (11) GRS (0) 2 (77) 11 (27) () (414) GRS (72) (02) (2) 4 (5) (51) ll dimensions shown in inches (millimeters). RF-7 - Flashing Flange Weathertight aluminum construction Integral birdscreen uilt-in flashing flange Throat ia. RF (457) 12 (05) (254) (12) 7 (17) ll dimensions shown in inches (millimeters). ia. ccessory Pressure rops 0 The chart to the right can be used with all of the discharge accessories shown on pages 20, 2 and 24. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection. Volume (cfm x 0) WL-1x RJ-x V-157, W-1x V-12, W-x W- W-x, W-, RJ-x, L-x, WL-x, V-0, RF-7, R Pressure rop (Inches wg) bove accessories tested with 4 feet of inlet duct 24

25 Specifications Vari-Green Vari-Green Motor Motor to be an electronic commutation () motor specifically designed for fan applications. induction type motors are not acceptable. xamples of unacceptable motors are: Shaded Pole, Permanent Split apacitor (PS), Split Phase, apacitor Start and Phase Induction type motors. Motors shall be permanently lubricated with heavy-duty ball bearings to match the fan load and prewired to the specific voltage and phase. Internal motor circuitry shall convert power supplied to the fan to power to operate the motor. Motor shall be speed controllable down to 20% of full speed (0% turndown). Speed shall be controlled by either a potentiometer dial mounted on the motor or by a 0- V signal. Motor shall be a minimum of 5% efficient at all speeds. Vari-Green ontrol - Remote ial Remote ial shall be a Vari-Green control specifically designed to provide 0- volt signal to Greenheck s Vari-Green motor. Vari-Green ontrol - Two-Speed Two-speed control shall be a Vari-Green control specifically designed to allow the Vari-Green motor to operate at two discrete speeds. Two-speed control shall include two dials that may be set at any point between 0 and volts and an integral transformer capable of reducing 115/ volt power to 24 volt power. Vari-Green ontrol Indoor ir Quality Temperature / Humidity ontrol to be a packaged indoor air quality control designed to regulate fan speed based on level of temperature and/or relative humidity in a space. ontrol shall include a Proportional Integral erivative (PI) feedback loop and shall have labeled terminal strips for easy wiring. Fan shall be direct drive including an electronic commutation () Vari-Green motor. ontrol package shall be Vari-Green Indoor ir Quality Temperature / Humidity ontrol. Vari-Green ontrol Indoor ir Quality VO (Volatile Organic ompound) ontrol to be a packaged indoor air quality control designed to regulate fan speed based on level of VO concentration in a space. ontrol shall include a Proportional Integral erivative (PI) feedback loop and shall have labeled terminal strips for easy wiring. Fan shall be direct drive including an electronic commutation () Vari-Green motor. ontrol package shall be Vari- Green Indoor ir Quality VO control. Vari-Green ontrol onstant Pressure ontrol to be a packaged constant pressure control designed to regulate fan speed based on demand. ontrol shall include a Proportional Integral erivative (PI) feedback loop and shall have all components prewired to labeled terminal strips for easy wiring. System shall include the appropriate pressure tap and preset pressure transducer. Fan shall be direct drive including an electronic commutation () Vari-Green Motor. ontrol package shall be Vari-Green onstant Pressure ontrol. Indoor installations shall include pressure tap (duct or room) and control box with integral pressure transducer. Outdoor installations shall include duct pressure tap, pressure transducer, and control box. ontrol box shall be prewired and in a NM-R weather tight enclosure for mounting outdoors near the fan location. L information Greenheck became one of the first manufacturers in the ir Movement and ontrol industry to join the L/green movement when they joined the United States Green uilding ouncil (USG) in Greenheck has been actively researching qualification requirements for our products to meet L credits and prerequisites. The Vari-Green motor significantly helps qualification efforts for the nergy and tmosphere credits and prerequisites; specifically credit one, Optimize nergy Performance and prerequisite two, Minimum nergy Performance. 25

26 Specifications s SP-50 thru 1550 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 1/2 inch (1 mm) acoustical insulation. The outlet duct collar shall include a polypropylene backdraft damper on SP-50-0 and a spring loaded aluminum backdraft damper on SP-1 and larger. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-50 through SP-0 shall be constructed of high-impact polystyrene and for sizes SP-4 through SP-1550, the grille shall be constructed of aluminum. s shall be non-yellowing. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. SP-0(L)-VG and SP-1L-VG eiling mounted exhaust fans shall be of the centrifugal direct drive type with an motor and overload protection. The fan housing shall be constructed of galvanized steel and have a low profile housing. The outlet duct collar shall have an aluminum backdraft damper. The fan shall be capable of built-in two-speed operation with a time delay. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Rating program M Sound and ir Performance Seal and shall be UL/cUL Listed. s SP-50, 70, 0, 0, 1, 150, and 200 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be inches (152 mm) in diameter and shall include a backdraft damper. The designer grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be internal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance Seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP-50, 70, 0, 0, 1, 150 or 200 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. SP-50 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be a sleeve for ease of connection to inch (7 mm) and 4 inch (2 mm) round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with torsion springs. The wheels shall be constructed of high-strength polymer. The access for wiring shall be easily accessible internally. The motor disconnect shall be internal and of the plug-in type. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal. SP-50 shall be UL Listed. Fans shall be model SP-50 as supplied by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. omplete specifications, in onstruction Specifications Institute (SI) format, are available on greenheck.com. 2

27 Specifications s SP-1 thru 00 uct-mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 1/2 inch (1 mm) acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper and shall be adaptable for horizontal or vertical discharge. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance Seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. s SP-1, 150 and 200 uct-mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be inch (152 mm) in diameter to accept inch (152 mm) round ductwork and shall include a backdraft damper. The access for wiring shall be internal. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance Seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP-1, 150 or 200 as manufactured by Greenheck Fan orporation, Schofield, Wisconsin. SP- fans with 50 hertz motors are not M certified. 27

28 njoy Greenheck s extraordinary service, before, during and after the sale. Greenheck offers added value to our wide selection of top performing, energyefficient products by providing several unique Greenheck service programs. Our Quick elivery Program ensures shipment of our in-stock products within 24 hours of placing your order. Our Quick uild made-to-order products can be produced in or 25-day production cycles, depending upon their complexity. Greenheck s free omputer ided Product Selection program (PS), rated by many as the best in the industry, helps you conveniently and efficiently select the right products for the challenge at hand. Greenheck has been Green for a long time! Our energy-saving products and ongoing corporate commitment to sustainability can help you qualify for L credits. Our service allows you to download, at no charge, easy-touse utoesk Revit drawings for many of our ventilation products. Find out more about these special Greenheck services at greenheck.com uilding Value in in ir ir Greenheck delivers value to mechanical engineers by helping them solve virtually any air quality challenges their clients face with a comprehensive selection of top quality, innovative airrelated equipment. We offer extra value to contractors by providing easy-to-install, competitively priced, reliable products that arrive on time. nd building owners and occupants value the energy efficiency, low maintenance and quiet dependable operation they experience long after the construction project ends. Our ommitment s a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the Library under Warranties. Prepared to Support Green uilding fforts P.O. ox 4 Schofield, WI Phone (715) greenheck.com 00.F&V.1 R SP opyright 2017 Greenheck Fan orp.