Centrifugal Ceiling and Cabinet Exhaust Fans. Models SP and CSP

Transcription

1 entrifugal eiling and abinet xhaust ans Models SP and SP January 2010

2 eiling and abinet xhaust ans Great things come in small packages, as do our ceiling fan SP models and cabinet fan SP models. e assured when you buy any Greenheck product, you are getting a quality product at a competitive price. In fact, we guarantee our ceiling and cabinet exhaust fans with a three-year warranty. We offer the most comprehensive ceiling and cabinet exhaust fan line in the commercial market. We are your market leader! enefits Lowest sound in the industry ompact size ive different fan styles offering you a competitive price roadest performance selections in the industry SP fans are designed for ceiling mounted applications. SP fans are designed for inline remote mounted applications. Greenheck an orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and M Publication 11 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Greenheck an orporation certifies that the SP models shown herein are licensed to bear the M seal. The ratings shown are based on tests and procedures performed in accordance with M Publication 211 and comply with the requirements of the M ertified Ratings Program. The SP models are not M certified with 50 hertz motors. Models SP and SP are listed electric fans (UL/cUL 507). eiling xhaust ans are also UL Listed for above bathtub/shower with GI branch protected circuit. ile no Quick elivery and Quick uild Programs Order from hundreds of SP and SP configurations, accessories and thousands of other products that can ship to your job site in less than 24 hours. We have strategically located warehouses across the United States and internationally to fill your request at a moments notice. or other sizes and configurations where rapid response time is required, our Quick uild (Q) program manufactures and ships your custom products in one, three, five, or ten days. Leading dge Technical Support When you need extensive product information look no further. Greenheck products are supported by the industry s best product literature, ranging from catalogs, installation, operation and maintenance manuals (IOM s), electronic media, computer aided product selection (PS) program and more. You ll also find this information on our web site at ount on personal service and expertise from our national and international representative organizations. To locate your nearest Greenheck representative, call or visit our web site at 2

3 Model omparison Model and Performance Pages escription Profile (minimum height) Sound (minimum sones) ir Volume (maximum) UL Listing Premium eiling an: SP- page 1 In the top of its class when it comes to meeting sound requirements inches (27 mm) 0.7 1,07 cfm (270 m /hr) UL Listed for above bathtub/shower with GI branch protected circuit (Sizes 90 and smaller) eluxe eiling an: SP- page 17 ompact enough for almost any application. If quiet is what you are after, this fan will accommodate your needs inches (17 mm) cfm (5 m /hr) UL Listed for above bathtub/shower with GI branch protected circuit conomy eiling an: SP- page 17 esigned for light commercial applications. 5 inches ( mm) cfm ( m /hr) UL Listed for above bathtub/shower with GI branch protected circuit Premium Inline an: SP- page 1 Outperforms the competition and is preferred by specifying engineers inches (27 mm) 0.,77 cfm (419 m /hr) UL/cUL Listed eluxe Inline an: SP- page 19 ompact and designed to fit in small remote quarters inches (17 mm) cfm (1 m /hr) UL/cUL Listed

4 Standard onstruction eatures Model SP Model SP Model SP Model SP Model SP

5 Standard onstruction eatures # Standard onstruction eatures 1 ackdraft amper 2 Outlet Power ssembly 4 lectrical ccess 5 lectrical Knockouts coustic Insulation Specific eatures for ach Model SP- SP- SP- SP- SP- Prevents unwanted backdrafts Spring loaded aluminum to eliminate rattling and backdrafts Round - or quick and easy connections Square - or quick and easy connections Removes quickly for maintenance Includes conversion from horizontal to vertical discharge Vertical electrical access to eliminate drilling holes xternal electrical access to eliminate removing motor pack, saving installation time liminates drilling holes (horizontal or vertical) Prepunched Prepunched Prepunched bsorbs sound 7 isconnect Servicing is quick and safe lectrical Junction ox Large for easy wiring 9 ttractive Grille oncealed attachment screws securely fasten grille to housing for quiet, rattle free operation 10 Mounting rackets 11 Housing 12 Motors 1 ccess Panel xclusive lectrical Wiring eature ouble Wide ans Vertical ischarge djustable for multiple installation conditions mbossed galvanized steel for rigidity low profile for height restricted areas ll motors are compatible for use with speed controls and have thermal overload protection omestic & International 50 cycle, 220v or 240v 0 cycle, 115v, 20v, 220v, 20v, & 277v options (See PS for availability) 0 cycle, 115v only Gain easy access to internal components once installed lectrical access cover located on the housing exterior. This feature permits external wiring without removing the power assembly, saving installation time and cost. vailable on models SP- and SP-. vailable for applications requiring 700 cfm or greater. ouble wide fans have two double width forward-curved wheels, which are housed in separate scrolls, and driven by a single motor. vailable on models SP- and SP-. xhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. vailable on models SP- and SP-. 5

6 Options and ccessories eiling Radiation amper The National ire Protection ssociation (NP) Standard 90 requires openings in fire rated ceiling/ floor assemblies to be protected by appropriately rated ceiling radiation dampers. s a result, many local codes require fans installed in fire rated ceilings to be protected by dampers which are insulated against both heat and flame. ontractor 4 Packs Save installation time and labor by installing the housing first, then installing the internal components after the sheetrocking, plastering and finishing is done. Housings are packaged in one box, power assemblies and grilles are packaged in another box. omponents are shipped to coincide with the phase of your project. (Model SP- only). UL lassified ceiling radiation dampers are rated at three to four hours of fire resistance. ll model SP- fans and fan/light combinations are available with ceiling radiation dampers. This design saves space by allowing the damper to mount directly beneath the fan. Model SP- Round uct onnections SP- an Hanging Vibration Isolation 4 inch - SP models: 50, 70 and 0 inch - SP models: 50, 70, 90, 90, 110, 150, and 200 in. x eiling Radiation amper ire Rated Grille eiling Model SP- in. SP Model R Length Width Height x (4) 14 (5) (4) 24 1 (14) (14) SP- an Hanging Vibration Isolation eiling Radiation amper ire Rated eiling Grille 11 1 (2) (11) (79) (11) (79) (7) (7) (7) (7) (7) ll dimensions shown in inches (millimeters). dd an L to all R models if fan & light combo is used. *R is approximately 1/4 inch ( mm) larger than housing dimension. (See Installation, Operation and Maintenance Manual) Round uct dapter Optional - SP sizes 110 through 510 Wheel Options Greenheck s ceiling and cabinet fans (models SP and SP) deliver high performance from a forwardcurved wheel. The forward-curved wheel design offers both highefficiency and low sound. an wheels are constructed of plastic or steel as standard, and all models offer an aluminum wheel option. Level models utilize steel or plastic wheel construction depending on size. Level models are standard with a plastic wheel. Plastic Steel luminum

7 SP Grille and Lighting Options Grille Options esigner is the standard grille for SP models and vailable in white plastic finish, with or without motion detector or time delay (see following pages for motion detector and time delay information). ecorative grille is optional on and vailable in white plastic finish, with or without light, motion detector or time delay (see following pages for motion detector and time delay information). luminum grille is optional on and Standard on 410 and larger. vailable in white enamel finish. Stainless Steel grille is optional on and vailable in polished stainless steel finish. Lighted Grille Options Greenheck s fan and light combinations include either a prismatic or a frosted lens and either compact fluorescent or incandescent lamps. Our unique light box is manufactured with a reflective material to increase the light given off by either type of lamp. UL Listed for above bathtub and showers with GI branch protected circuit. Model SP-, sizes Model SP-, sizes Prismatic Lens The prismatic lens design provides approximately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs. rosted Lens The frosted lens option is a traditional design which lets approximately 0% of light through the lens. The lens may be easily removed to replace light bulbs. Incandescent Lamps One bulb provides up to 100 watts of light (bulbs to be provided by others). immable Reflective light box ompact luorescent Lamps (L) Quick start bulbs (1 or 2 bulbs) Reflective light box Produce 90% less heat Lower energy costs Two 1 watt L bulbs equals 100 watts of incandescent light. ulbs are included. major advantage of using L s is to save money, as shown in the table below. This table assumes the light is on for six hours per day and the electric rate is 10 cents per kilowatt-hour. This study was based over a 41/2 year period. 27 Watt ompact luorescent 100 Watt Incandescent ost of Lamps $14.00 $0.50 Lamp Life 1,42.5 days (4.5 years) 17 days nnual nergy ost $5.91 $21.90 Lamps Replaced in 4.5 years 0 10 Total ost $40.0 $10.55 Savings Over Lamp Life $2.95 $0.00 Source: U.S. epartment of nergy, ugust 2001 Office of nergy fficiency and Renewable nergy 7

8 ontrol ccessories Speed ontrols Speed controls may be used on model SP and SP fans for manual adjustment of the fan s performance (for final system balancing) or to control the fan s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 0% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in Internal Mounting noise level. Solid state speed controls are available for a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if the combined total amperage of the fans do not exceed the control rating. H ULL VOLTG LK SP ONTROL R WHIT VRIL VOLTG SWITH ULL VOLTG otted line indicates for use with 10W switch only. UX VI Switches Switches may be used on model SP and SP fans to enable manual control of your fan or fan and light combination. There are several options to fit your application. NM 1 - Single pole rocker switch assembly. Rated for, 115v, 15 mp, 1/2 hp UL Listed Model MS-1 - Single pole rocker switch assembly with cover and pilot light. Rated for, 115v, 15 mp, 1/2 hp UL Listed NM 1 - Two pole rocker switch assembly. Rated for, 220/20/240/277v, 20 mp, 2 hp UL Listed Requires a 2x4 handy box. XTRNL JUMPR 120 V N LO N or use with shaded pole and permanent split capacitor (PS) motors. vailable shipped loose or mounted internal or external. LO Model Voltage Rating mp Rating 5WSS v 5 mp 10WSS v 10 mp 15WSS v 15 mp 5W v 5 mp WSS v mp 5W v 5 mp SP ONTROL INTRNL N/OR XTRNL MOUNTING OPTIONS an Sizes I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ I/ No No No No No No No No No No No *I/ I/ No I/ I/ *I/ No I/ I/ No I/ No No I/ No I/ No I/ No No No No No No * No * No No No No No No No No No No No No No I/ I/ I/ I/ *I/ No No No No No No No No No No No No No No No = xternal mounted only I/ = vailable Internal and xternal Mounted KY: * Only available on the -series (-series is not available) No = Not available NOTS: Speed controllers are not available for 20v applications. SP-50 Speed ontroller is shipped loose only. ll speed controller options listed in table are UL Listed. Handy ox sizes are 2x4 for all options above except 10WSS and 15WSS, which are 4x4.

9 ontrol ccessories Time elay Switch Time delay switches save energy by automatically turning off equipment. They may be used with SP and SP fans or fan and light combinations for extended operating time of fan. Time delay switches act in the same manner as a standard switch, however, there is a delay of 1 to 0 minutes after it has been turned off. 115 VOLT 0 YL (NUTRL) (HOT) LK WHIT LU R (500 Watt Max) LIGHT (7.5 mps Max) N MOTOR Motion etectors Motion detectors may be used with SP and SP fans or fan and light combinations. Motion detectors use a passive infrared motion detector to automatically turn the fan on when a change in motion is sensed. They have a viewing area of 10 degrees, however they must be placed in the lineof-sight. They also have an adjustable time delay shutoff setting of 1 to 20 minutes. lack Hot Motion Sensor lack White Red Hot Green Model GT - single switch controls both fan and light. vailable shipped loose. Silent Operation Rated for 115v UL Listed Requires 2x4 handy box Transformers Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. ll transformers are shipped loose. Gnd. Red Load (12.5 mps Max.) Wall Mount Neutral an Motor and/or Light lack Green White Grille Mount Neutral Ground Grille Motion etectors are available on models up through size SP-90 and SP-200. Rated for 115v UL Listed Model MW or use on fan or lights. vailable shipped loose. Rated for 115v UL Listed Requires 2x4 handy box Models Voltage Ratings mp Ratings T /277v to mps T-4. 20/277v to mps T-.5 20/277v to mps T-. 20/277v to 115. mps SWITH OX 277 V SUPPLY LK LK LK H1 H2 H 277V TO 115V TRNS. 750 V X1 R X2 R SWITH 115 V MOTOR 9

10 ilters and ischarge ccessories ilters ans used in most applications will collect airborne dirt on wheels and motors over time, even where air is not excessively dirty. ccumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. irt buildup on the motor can cause it to overheat. ll of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to trap dirt before it enters the fan. These filters should be regularly cleaned to maintain performance. The ilter Loss hart shows the effect the filter will have on performance. To determine the added resistance, divide the desired cfm by the filter area (ft 2 ). This will give PM. Use this with the filter loss chart to get the added resistance. ilters reduce sound levels, in addition to reducing dirt accumulations on the motor and wheel. RJ-4 and RJ-x9 Roof ischarge ccessories Model RJ - Pitched Roof ap Steel construction with black enamel finish Integral flashing flange uilt-in birdscreen and damper R-7 RJ-4 and RJ-x9 RJ-10x10 R Mesh ilter 10 Resistance in w.c SP Grille R Velocity PM x 100 1/4-20 hanging ilter support Loss hart rod by others ilter Model ilter SP Model esigner *Metal Grill Grille rea (ft 2 ) SP SP , SP SP N SP N *luminium or Stainless Steel Grille. ia. 1.5 () Model or use with sizes: Throat 11 9 RJ-4 50, (102) R (279) (25) (210) (15) (114) diameter GRS RJ-x , x 9 (47) (2) () (24) (15) (152 x 229) 1 RJ-10x x 10 (470) (99) (400) (00) (241) (254 x 254) ll dimensions shown in inches (millimeters). ia. Model L-10x - lbow ischarge with Grille esigned for installation under roof eaves ia. Painted steel louvered grille uilt-in damper or model SP and SP sizes (9) 10 (254) 2.75 (7).5 (15) 1.25 (42).75 () (2) 9.75 (2) 11.5 (292) (10) ll dimensions shown in inches (millimeters) (44)

11 lat Roof aps -7 RJ-x9 ia. /4-20 nging pport od by thers R Model R-7 R - urb ap Weathertight aluminum R-7 construction Integral birdscreen RJ-10x10 uilt-in curb cap Requires roof curb 1.5 () 1.5 () or use Throat Model with all ia. sizes: R (1) 12 (05) 10 (254) (12) 7 (17) ll dimensions shown in inches (millimeters). Model GRS - urb ap ia. GRSModel GRS - lashing lange GRS ll aluminum exterior construction R Galvanized steel internal supports GRS Integral birdscreen uilt-in flashing flange ll aluminum exterior construction Hanging Vibration Isolators Galvanized steel internal supports Vibration isolator kits are available for suspended Integral birdscreen installations. Kits include all hardware necessary uilt-in curb cap to mount one unit, with the exception of 1/4-20 threaded rod to be supplied by others. an Requires roof RJ-4 curb and RJ-x9 ia (44) RJ-10x10 mounting brackets ia. include prepunched mounting holes for ease of installation. or use Throat Model with all ia. sizes: GRS (4) (521) 1 4 (159) (7) (20) GRS (559) 29 (77) 7 7 (200) 1 4 () (11) GRS (0) 29 (77) 4 (222) 4 (95) (414) 1/4-20 hanging GRS (72) (902) (25) (10) 20 support 5 1 (51) ll dimensions shown in inches (millimeters). rod by others 4 (102) dia. Model R-7 - lashing lange R-7 (152) Weathertight aluminum construction R dia. GRS GRS Integral birdscreen.25 (159) uilt-in flashing flange ia. ia. (152) dia. 1.5 ().25 (159) ia. GRS ia. or use Throat Model with all ia. sizes: R (457) 12 (05) 10 (254) (12) 7 (17) ll dimensions shown in inches (millimeters). 4 (102) dia. ia. Unit Size (114) 15 5 (97) (140) 14 5 (71) ia (44) 4 (171) (94) ia. 410, 510, 710, (25) 19 5 (49) (140) 25 1 () , (25) 25 (45) 1750, (25) 4 (9) (25) 4 5 (125) ll dimensions shown in inches (millimeters) (44) G ia. or use Throat Model with all ia. sizes: GRS (54) (521) 1 4 (159) (7) (20) GRS (0) 29 (77) 7 7 (200) 1 4 () (11) GRS (72) 29 (77) 4 (222) 4 (95) (414) GRS (4) (902) (25) (10) (51) ll dimensions shown in inches (millimeters). GRS G G 11

12 Wall ischarge ccessories RJ-4 and RJ-x9 Model W (Round onnection) - Hooded Wall ap luminum construction - aluminum finish or outside wall R-7 applications R uilt-in birdscreen (not available on W-4) and R-7 damper ia. 1.5 () 1.5 () Model R - Round uct onnector Replaces the standard square discharge ductconnector and damper Uses existing mounting holes Galvanized steel construction GRS R R- includes a damper GRS R- does not include a damper R- ia. ia (44) GRS Model or use with sizes: W-4 50, (15) (152) W- W- 1/ , hanging (20) (20) support rod by others (279) (279) ll dimensions shown in inches (millimeters). Model WL - Wall Louvered ischarge nodized aluminum grille uilt-in damper Not recommended for exterior applications exposed to severe weather conditions. n external wall louver is recommended for such applications. Model or use with all sizes: 4 (102) (152) (20) 2 4 (70) 4 1 (105) 5 1 (10) 5 (127) 5 (127) 1 2 (9) R- (152) dia. (152) dia. Model TR x4 - Transition uct Reducer Reduces duct from to 4 inches. Galvanized steel construction 4 (102) dia..25 (159).25 (159) R- Model or use with sizes: iameter R (152) R (20) ll dimensions shown in inches (millimeters). 4 (102) dia. WL-10x WL-1x (05) 19 4 (502) (1) (20) ll dimensions shown in inches (millimeters). 10 (254) 1 (457) 7 4 (197) 9 (229) 1 2 (9) (152) Model TR x4 or use with sizes: * ll dimensions shown in inches (millimeters). *Used in conjunction with R-. 12

13 Wall ischarge ccessories Model W - Hooded Wall ap (Square or Rectangular onnections) Steel construction with black enamel finish or outside wall applications uilt-in birdscreen and damper ccessory Pressure rops The chart below can be used with all of the discharge accessories shown on these two pages. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection. Model or use with all sizes: W-10x W-x W-1x Model V - rick Vent G (140) (20) (20) 12 4 (24) (20) (514) 1 2 (9) 1 4 (210) 1 4 (210) ll dimensions shown in inches (millimeters) (20) 1 4 (210) (44) 11 1 (2) 1 4 (210) (44) esigned for installation in masonry walls nodized aluminum construction uilt-in aluminum mesh insect screen G (10) 4 (171) 4 (171) 5 (127) 5 (127) 5 (127) cfm x Pressure rop in Inches wg bove accessories tested with 4 feet of inlet duct WL-1x RJ-10x10 V-157, W-1x V-12, W-x W- W-10x, W-, RJ-x9, L-10x, WL-10x, V-0, R-7, R-7 Model or use with all sizes: V V V (20) 12 (05) 15 5 (97) ll dimensions shown in inches (millimeters). 7 4 (197) 7 4 (197) 7 4 (197) 4 (102) 4 (102) 4 (102) 1

14 Things to know when sound is critical Sound ata The sound data shown in this catalog has been presented to aid the system designer in selecting a fan which will meet the desired sound criteria. Sone levels have been included on the performance pages to provide a means of quickly evaluating the relative loudness of a fan selection. What is a sone? Sones are an internationally recognized unit of loudness. In practical terms, the loudness of one sone is equivalent to the sound of a quiet refrigerator measured from five feet away in an acoustically average room. sone is a single number rating, which indicates the inlet noise derived from the eight audible octave bands. Sones are a linear measurement of sound level. or example, a sound level of 10 sones is twice as loud as 5 sones. What is the difference in an M Sone vs. an HVI Sone? In general, the M (ir Movement and ontrol ssociation) sone value is focused on commercial markets, whereas the HVI (Home Ventilating Institute) sone value is focused on residential markets. oth calculate their sone data from the same raw test data (eight octave bands), however an M sone applies a hemispherical correction factor to the sound power and rounds to the nearest 0.1, whereas HVI applies a spherical correction factor to the sound power and rounds to the nearest 0.1 under 1.5 sones and to the nearest 0.5 for 1.5 sones and greater. There are no conversions from one sone to the other, each must be calculated. In every instance, the same fan will have a lower HVI calculated sone rating than an M calculated sone rating. an radiated noise increase the sound levels? Radiated noise from fan housings can cause unacceptable sound levels, on any brand of fan. The size of these fans allows them to be placed in areas where this noise will be transmitted to the conditioned space through walls or ceilings. Where possible, cabinet fans should be located in remote parts of the ventilation system. When should a SP or SP fan be used? Model SP and SP fans are designed for the lowest possible sound levels. orward-curved wheels, insulated housings and vibration isolators between the motor and housing contribute to quiet, efficient operation. pplied and installed as recommended, SP and SP sound levels will fall well within the ranges shown in the Suggested Limits for Room Loudness chart. or applications where sound levels are critical, a remote mounted SP with ductboard is recommended. Placement of SP and SP fans should take into account the desired sound level at the location of the listener. Suggested Limits for Room Loudness Sones Private homes (rural and suburban) onference rooms Hotel rooms, libraries, movie theatres, executive offices Schools and classrooms, hospital wards and operating rooms ourt rooms, museums, apartment houses, private homes (urban) Restaurants, lobbies, general open offices, banks orridors and halls, cocktail lounges, washrooms and toilets Hotel kitchens and laundries, supermarkets Reprinted from M Publication 02 (pplication of Sone Ratings for Non-ducted ir Moving evices, with room sone d correlations) with the written permission from the M International, Inc., 0 West University rive, rlington Heights, IL NOT: Values above are for room loudness and are not sound ratings. Room loudness is the resulting level in a conditioned space after the acoustical qualities of the room have been accounted for. 14

15 Things to know when sound is critical Their compact size allows the system designer greater flexibility in locating these fans for lowest sound levels. In critical sound areas, insulated ductwork, flexible duct connections, or placing the fan in a remote section of the ductwork (away from the critical area) offers the best means of meeting desired sound levels. When room sound levels are critical, such as in executive offices, conference rooms, hospital operating rooms, and school study areas, a SP fan is the best choice. Shown here is a comparison of SP and SP fans of the same size, with equal performance in typical installations. The SP shows lower sone values. iberglass Remote mounted model SP with vibration isolators and insulated ductwork provides the quietest installation. Model M WG RPM Sones SP / SP / *Sone value with insulated inlet duct. Model SP mounted directly overhead may be too loud for sound critical applications. Model Number ode SP - 50 L Light Options: L - an/light (Incandescent) ombination L - an/light (luorescent) ombination Nominal cfm at 0.10 inches static pressure Level of onstruction: - Premium unit; lowest sound, insulated housing - eluxe unit; low sound, low profile - Standard unit; lowest profile, inexpensive Model: SP - Silent Partner SP - abinet Silent Partner 15

16 Model SP- Premium eiling an Model SP- imensions Model 50, 70, , 125, , 250, 290, , , , 1050, 1410, (7) (7) 14 (5) 1 (457) 2 5 (00) 1 (457) 2 4 (0) 10 5 (270) 10 5 (270) 11 7 (02) 14 (5) 11 5 (295) 14 (5) 14 (5) esigner Grille ecorative Grille 11 5 (295) (152) x (7) sq. (27) (20) (152) (7 x 7) (2) (20) (20) x 1 () (20) (20) (492 x 41) x (295) (495) (20) ( x 4) x 1 () (254) (20) (492 x 41) x 1 () (47) (20) (5 x 41) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 11/2 in. ( mm). or complete dimensional information, see PS submittal drawings. Unit Weight 12 (5) 17 () 24 (11) 1 (14) 4 (15) 4 (15) 5 (25) Model RPM mps Watts SP-50 2,, SP-70 2,, SP-90 2,, SP-110 2,, 4, 5, SP-125 2,, 5, SP-190, 4, 5, SP-200, SP-250, SP-290, 4, SP-90, 4, SP SP-510, SP SP SP-70, SP SP-1050, SP SP-1550, vailable with light vailable with R - eiling Radiation amper 4 lso available with 50 Hz motors (See page 20 for performance) M / Static Pressure in Inches wg M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones M Sones UL Listed for use above tubs. vailable with 277 volt motor. Performance certified is for model SP exhaust for installation type : ree inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. 1

17 Model SP- and SP- eluxe and Standard eiling an Model SP- imensions Model * 50, 70 & 0 90, 110, 150, (52) 1 7 (52) (292) (292) 15 1 (17) (202) 4 (102) (152) esigner Grille ecorative Grille /4 (19) 14 7 x (7) sq (7 x 7) (2) Unit Weight 9 (4) 10 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). *dd 11/2 in. ( mm) to dimension for incandescent light. Mounting bracket width is 11/2 in. ( mm). or complete dimensional information, see PS submittal drawings. Model RPM mps Watts SP-50 2,, SP-70 2,, SP-0 2,, SP-90 2,, 4, SP-110 2,, 4, 5, SP-150 2,, 4, 5, SP-200, 4, 5, vailable with light vailable with R - eiling Radiation amper 4 lso available with 50 Hz motors (See page 20 for performance) M / Static Pressure in Inches wg M Sones M Sones M Sones M Sones M Sones M Sones M Sones UL Listed for use above tubs. vailable with 277 volt motor. Performance certified is for model SP exhaust for installation type : ree inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. Model SP- imensions Model (191) (191) 5 (92) (7) 1 5 (41) 1/2 (1) ecorative Grille x 9 (25 x 229) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). or complete dimensional information, see PS submittal drawings. Unit Weight 5 (2) Model RPM mps Watts SP M / Static Pressure in Inches wg M Sones Performance certified is for model SP exhaust for installation type : ree inlet, ucted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : free inlet spherical fan sone levels. 17

18 Model SP- Premium Inline an Model SP- imensions Model G Unit Weight 110, 125, , 250, 290, , , , 1050, 1410, , (7) 14 (5) 1 (457) 2 5 (00) 1 (457) (270) 11 7 (02) 14 (5) 11 5 (295) 14 (5) 14 (0) (5) (9) (75) (115) (419) (27) (2) () 11 5 (295) () () 14 4 (75) (419) (20) (20) (20) (495) 10 (254) 1 4 (47) 2 (711) 40 (101) (152) (20) (20) (20) (20) (20) (152) 11 (279) 12 (05) 12 7 (27) 1 7 (429) 22 5 (575) 1 7 (429) 22 5 (575) 2 4 (2) (1099) (25) 10 (254) (7) (27) (7) (7) 1 (0) 14 5 (71) 1 (7) 2 (10) (1) 4 (15) (1) 59 (27) (1) 122 (55) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 11/2 in. ( mm). or complete dimensional information, see PS submittal drawings. G G Inlet 1 Model RPM mps Watts M / Static Pressure in Inches wg SP M Sones SP M Sones SP-190 4, M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones SP M Sones Units also available with 50 Hz motors (See page 21 for performance) vailable with 277 volt motor. Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on 10 ft of insulated duct. The M ertified Ratings Seal applies to air performance ratings only.

19 Model SP- eluxe Inline an Model SP- imensions Model G 110, 150, (52) (292) (202) (152) (2) (20) 1 4 () Unit Weight (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 11/2 in. ( mm). or complete dimensional information, see PS submittal drawings. Inlet xg - diameter Model RPM mps Watts SP-110 4, SP-150 4, SP-200 4, Units also available with 50 Hz motors (See page 21 for performance) M / Static Pressure in Inches wg M Sones M Sones M Sones vailable with 277 volt motor. Performance certified is for model SP inline for installation type : ucted inlet, ucted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per nnex of M 11. Values shown are for installation type : ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on 10 ft of insulated duct. The M ertified Ratings Seal applies to air performance ratings only. 19

20 Model SP 50 ycle Performance or uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for ceiling mounted exhaust fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs ull line of grille and discharge accessories available SP- Model SP imensions SP- Standard Grille ecorative Grille 50, 70, , 125, x (7) (7) (7) (270) (270) (295) (27) (152) (20) (152) (7 x 7) square 200, 250, 290, (5) (02) (2) (20) (20) , x 1 (457) (5) () (20) (20) (492 x 41) 710, x 1 (457) (5) () (254) (20) (492 x 41) 900, 1050, x , 1550 (0) (5) () (47) (20) (5 x 41) Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 11/2 in. ( mm). Unit Weight 12 (5) 17 () 24 (11) 1 (14) 4 (15) 5 (25) SP- esigner ecorative Unit Grille Grille Weight 50, 70 & / x (52) (292) (17) (102) (19) (7 x 7) (7) (4) 90, 110, 150, (52) (292) (202) (152) (2) 14 7 x (7 x 7) square 10 (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). *dd 11/2 in. ( mm) to dimension for incandescent light. Mounting bracket width is 11/2 in. ( mm). or complete dimensional information, see PS submittal drawings. SP- (double wide) SP- 20 M / Static Pressure in Inches of wg. Model RPM mps Watts SP-110 M Sones SP-190 M Sones SP-290 M Sones SP-90 M Sones SP-510 M Sones SP-70 M Sones SP-1050 M Sones SP-1550 M Sones SP-90 M Sones SP-110 M Sones SP-150 M Sones SP-200 M Sones Model SP with 50 hertz motor is not M certified.

21 Model SP 50 ycle Performance or uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for inline cabinet fans model SP. Same dimensions and outlet options Performance shown in 50 cycle RPMs ull line of discharge accessories available Model SP imensions SP- G Unit Weight 110, 125, (7) (270) (27) (20) (152) (05) (25) (7) 200, 250, 290, (5) (02) (2) (20) (20) (27) (254) (10) , G (457) (5) () (20) (20) (429) (7) (1) (00) (295) (295) (495) (20) (575) (27) (15) , (457) (5) () (254) (20) (429) (7) (1) 900, 1050, , 1550 (0) (5) () (47) (20) (575) (7) (27) 1750, (9) (75) (75) (711) (152) (2) (0) (1) (115) (419) (419) (101) (279) (1099) (71) (55) SP- G Unit Weight 1 110, 150, Inlet (52) (292) (202) xg (152) (2) (20) () (5) ll dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 11/2 in. ( mm). or complete dimensional information, see PS submittal drawings. Inlet - diameterxg G SP- SP- (double wide) G G Inlet SP- - diameter G Inlet M / Static Pressure in Inches of wg Model RPM mps Watts SP-110 M Sones SP-190 M Sones SP-90 M Sones SP-70 M Sones SP-1050 M Sones SP-1550 M Sones SP-110 M Sones SP-150 M Sones SP-200 M Sones Model SP with 50 hertz motor is not M certified. 21

22 Model SP Specifications Models SP-50 thru 1550 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 1/2 inch (1 mm) acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper on all SP- sizes and shall be spring loaded on size SP-110 and larger. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-50 through SP-90 shall be constructed of high-impact polystyrene and for sizes SP-410 through SP-1550, the grille shall be constructed of aluminum. Grilles shall be non-yellowing. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck an orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified. Models SP-50, 70, 0, 90, 110, 150, and 200 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The steel duct collar shall be 4 inch (102 mm) in diameter on the 50, 70, and 0 and inch (152 mm) in diameter on the 90, 150, and 200 to accept 4 inch (102 mm) and inch (152 mm) round ductwork and shall include a backdraft damper. The designer grille shall be constructed of non-yellowing high impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M Sound and ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP-50, 70, 0, 90, 110, 150 or 200 as manufactured by Greenheck an orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified. Model SP-50 eiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The plastic duct collar shall be a sleeve for ease of connection to inch (7 mm) and 4 inch (102 mm) round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high impact polystyrene and attached to the housing with torsion springs. The wheels shall be constructed of high-strength polymer. The access for wiring shall be easily accessible internally. The motor disconnect shall be internal and of the plug-in type. ll fans shall bear the M ertified Ratings program M ir Performance seal. Model SP-50 shall be UL Listed. ans shall be model SP-50 as supplied by Greenheck an orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified. 22

23 Model SP Specifications Models SP-110 thru 00 uct mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy-gauge galvanized steel. The housing interior shall be lined with 1/2 inch (1 mm) acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper and shall be adaptable for horizontal or vertical discharge. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP as manufactured by Greenheck an orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified. Models SP-110, 150 and 200 uct mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The steel duct collar shall be inch (152 mm) in diameter to accept inch (152 mm) round ductwork and shall include a backdraft damper. The access for wiring shall be external. The motor disconnect shall be internal and of the plug-in type. The motor shall mounted on vibration isolators. The fan wheel shall be of the forward-curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. ll fans shall bear the M ertified Ratings program M ir Performance seal and shall be UL/cUL Listed. eiling or wall mount fans shall be model SP-110, 150 or 200 as manufactured by Greenheck an orporation, Schofield, Wisconsin. *Model SP- fans with 50 hertz motors are not M certified. 2

24 eiling an Solutions eiling ans eiling ans w/ Light eiling ans w/ R eiling ans w/ Light & R SP-110 SP-110 SP-90 SP-125 SP-50 SP-70 SP-90 SP-90 SP-50 SP-90 SP-200 SP-0 Our Warranty Greenheck an orporation warrants its SP/SP products to be free of any defect in material or workmanship for a period of three years from the date of shipment. In the event of such a defect during the warranty period, Greenheck an orporation agrees, at its option, to either repair or replace the defective product free of charge. This warranty runs to the original purchaser of such SP/SP products for a period of three years from the date of shipment. ny product repaired or replaced under this warranty will, itself, be warranted only for the remainder of the warranty period of the original product being repaired or replaced. ll light bulbs are excluded under this limited warranty. Greenheck an orporation is not responsible for any removal, installation, or transportation cost. s a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Prepared to Support Green uilding fforts P.O. ox 410 Schofield, WI Phone (715) greenheck.com SP SP Rev. 7 January 2010 opyright 2010 Greenheck an orp.