Centrifugal Inline Fans Models SQ and BSQ Direct and Belt Drive

Transcription

1 Centrifugal Inline s Models SQ and BSQ Direct and Belt Drive May 21

2 Models SQ and BSQ Centrifugal Square Inline Duct s Table of Contents Standard Construction Features Vari-Green Motor & Control Options Options and Accessories...8 Filter Options...9 Discharge Configurations Mounting Options Isolators...1 Typical Installation...14 Model Number Code...14 Direct Drive Belt Drive Specifications Quick Delivery...48 Our Commitment...48 Greenheck Corporation certifies the model SQ and BSQ fans shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and Publication 11 and comply with the requirements of the AMCA Certified Ratings Program. The certified ratings for models SQ and BSQ are shown on pages 15 to 45. UL is optional and must be specified. SQ and BSQ models are Listed for Electrical (UL/cUL 75) File no. E41 Models SQ 1 and greater. Models BSQ 7 through BSQ 42 For a CE compliant installation, all electrical connections must be made by a qualified electrician. 2

3 Models SQ and BSQ Centrifugal Square Inline Duct s Model Comparison Location Mounting Airflow Application Drive Type Impeller Type Performance Model Outdoor Indoor Roof Curb Base/Floor Hanging Wall Ceiling Mounted Exhaust Supply Reversible Recirculate General/Clean Air Contaminated Air Spark Resistant Grease (UL 762) Smoke Control (UL) High Wind (15 mph) High Temp (above 2 F ) Belt Direct Centrifugal Propeller/Axial Mixed Flow Maximum Volume (cfm) Maximum Static Pressure (in. wg) Relative Cost SQ 5, 2 $ BSQ 27,2 4 $ Greenheck s model SQ and BSQ centrifugal inline fans feature a unique combination of installation flexibility, rugged construction, ease of service, high efficiency and low sound levels. These compact inline fans are the ideal selection for indoor clean air applications including intake, exhaust, return or make-up air systems where space is a prime consideration. The need for costly square-to-round transition pieces is eliminated reducing installation costs. The square housing design, compact size and straight-thru airflow also give the system designer the flexibility to mount SQ and BSQ fans in any configuration - horizontal, vertical or at any angle. Broadest performance in the industry, up to 4 in. wg (1, Pa) and 28, cfm (47, m /hr). Performance as cataloged is assured. All fan sizes are tested in our AMCA Accredited Laboratory, and all models are licensed to bear the AMCA Sound and Air Performance seals. UL Listed for Electrical. These Greenheck products are subjected to extensive life testing to assure the fans will provide many years of reliable performance. Over the years Greenheck has listened to your needs and input to remain the industry leader. Each fan is tested at the factory prior to shipping. The test includes vibration check, adjusting and maximum amp draw. Each fan displays a permanently stamped metal nameplate with complete model number, mark and unique serial number for future identification. Packaged-product is tested in accordance with ISTA (International Safe Transit Association) standards and procedures. Turn to our inline fans to meet your requirements for applications in office buildings, schools and hospitals to name a few.

4 Standard Construction Features Model SQ Direct Drive Model BSQ Belt Drive

5 Standard Construction Features 1 Cabinet Construction The fan housing is constructed of rigid structural members and formed galvanized steel panels. (Aluminum construction is optional in SQ sizes 6-16 and in BSQ sizes 7-). 2 Drive Frame Constructed from heavy-gauge steel. Wheel An aluminum, backward inclined, nonoverloading centrifugal wheel is utilized to deliver maximum efficiency. Each wheel is statically and dynamically balanced. 4 Duct Collars Inlet and discharge duct collars are provided for easy duct connection. The square design provides a larger discharge area than tubular centrifugal and vane axial fans; outlet velocities are reduced for quieter operation. 5 Motor Permanently lubricated, sealed ball bearing motors are selected to provide years of trouble-free operation with minimal maintenance. 6 Bearings 1 percent factory tested bearings are designed specifically for air handling applications with a minimum L 1 life in excess of 1, hours (L 5 average life in excess of 5, hours) Drive Assembly Drives are sized for a minimum of 15 percent of driven horsepower. Machined cast iron pulleys are factory set to the required and adjustable for final system balancing. Belts are static free and oil resistant. Belt adjustment is accomplished by loosening fasteners, sliding the motor plate and retightening fasteners. Shaft shafts are precisely sized, ground and polished so the first critical speed is at least 25 percent over the maximum operating speed. Close tolerances where the shaft makes contact with bearings result in longer bearing life. Disconnect Switch NEMA-1 disconnect switch is factory-mounted and wiring is provided from the motor as standard. All wiring and electrical components comply with the National Electric Codes and materials are UL Listed. Other NEMA enclosure disconnect switches are optional. Access Panels (not shown on images) The cabinet construction features two removable access panels permitting easy access to all interior components. 5

6 Vari-Green Options Vari-Green Motor - Model SQ Greenheck s electronically commutated (EC) Vari-Green (VG) motor combines motor technology, controllability and energy-efficiency into one single low maintenance unit and is the industry s first fully controllable motor. When combined with Greenheck s SQ fans, all the CFM and static pressure ranges of a belt drive can be attained with the benefits of a direct drive. The Vari-Green motor is available in: 1/6 - /4 horsepower 115 volt only. 1 horsepower 115/28-2 volt. 2 horsepower 28-2 volt. All motors are available in a 5/6 Hz power. Benefits Operates on AC power that s converted to DC providing a more efficient motor operation as compared to an AC operation. The motor can attain up to 85% efficiency and reduce energy consumption. Watt savings of -7% depending on. Note: As motor speed is turned down, efficiency stays high as compared to an AC motor that decreases dramatically. Operates cooler than a standard AC motor at lower s. A cooler motor has longer motor life and reduces energy consumption. 8% usable turndown vs. %. (chart at right) SQ fans with Vari-Green motors can provide all the CFM and static pressure ranges of a comparable belt drive. Maintenance costs are reduced as there are no belts or bearings to replace and no pulleys to adjust. Direct drive fans are often preferred where maintenance access is difficult. Provides a solution for demand controlled ventilation applications. Vari-Green Advantages Initial cost is similar to a belt drive Lower operating cost No maintenance, no belts, pulleys or bearings Easy adjustment Features 1. Dial on Motor Control - A potentiometer (dial on motor control) is mounted on the motor for easy speed adjustment for system balance. Simply turn the dial; there are no belts and pulleys to adjust. 2. Control Wire Inputs - the motor accepts a -1 VDC signal from Building Automated Systems, Vari-Green Controls or other controls to adjust motor speed. Motor Turndown Comparison INPUT POWER (WATTS) 1 Comparisons: Belt, Direct Drive with PSC and Direct Drive with Vari-Green BSQ-12 Single Phase* 5% 75% 1% SQ-12 with PSC Not recommended Energy Savings SQ-12 with FAN SPEED () * BSQ is a belt driven fan The length of each curve indicates the practical turndown range. Data is for 1/2 hp motors with load of.5 Bhp at full speed Constant Volume Life Cycle Analysis $2,5 2,25 2, 1,75 1,5 1,25 1, $ Three Year Cost Comparison BSQ- 12 SQ- 12-A5 Initial Cost Maintenance cost over three years Operating cost over three years SQ- 12-VG Analysis is based on operating costs for a period of three years where the fans operate continuously at 1725 rpm, 24/7, with an energy rate of $.1/kWh. Maintenance on the SQ-12 is estimated at $65/yr. Note: Example is based on a relative cost. Use and installation variables may produce different results. 6

7 Vari-Green Options Demand Control Ventilation for Multistory Buildings Applications requiring constant pressure or variable volume can utilize SQ fans with Vari-Green motors and Vari-Green controls. Demand control ventilation systems reduce the amount of energy used by decreasing the speed of the fan when demand is low. This in turn lessens the amount of conditioned air exhausted and further reduces total operating costs associated with air conditioning and heating in multistoried buildings such as: hotels, multifamily complexes, institutional facilities, and high rise commercial buildings. Variable Volume Operating Cost Analysis Variable Volume vs. Constant Volume $2, 1,75 1,5 1,25 1, $ Variable Volume Heating Cost Cooling Cost Operating Cost Constant Volume Example of potential savings based on a northeast city in the USA using Vari-Green components for variable volume. The Vari-Green constant pressure control is preprogrammed and easy-to-install for applications that include: venting dryers, bathrooms, residential type kitchen space or industrial process exhaust. Contact fans@greenheck.com for more information. Daily Operating Comparison: Variable Volume and Constant Volume % of Operation % of Operation Hypothetical (Hotel Bathroom) Variable Volume - Load Shape 1 8$$$$$$$$$$$$$$$$$$$$$$$$ 6$$$$$$$$$$$$$$$$$$$$$$$$ 4$$$$$$$$$$$$$$$$$$$$$$$$ 2$$$$$$$$$$$$$$$$$$$$$$$$ % $$$$$$$$$$$$$$$$$$$$$$$$ Series 1 Time of Day Demand controlled ventilation offers significant energy savings by exhausting only the necessary amount of air throughout the day. Constant Volume - Load Shape % Series 2 Time of Day Note: A standard VFD compatible motor can also function within a variable volume system. Vari-Green Controls Transformer - Provides 24V power from the existing line voltage at the fan to the Vari-Green motor and controls. Dual voltage primary (12/24V) transformer provided with the fan. Remote Dial - Allows for remote, manual airflow adjustments. Wall plate with dial may be mounted in a standard 2x4 inch electrical junction box. Two Speed Control with Integral Transformer Control allows motor rpm to be set at two independent speeds (high or low). Meets minimum airflow requirements with the ability to bump up to high speed in an emergency or meet maximum airflow requirements, or reset to low for energy conservation. Constant Pressure Control - Indoor - Control Vari- Green motor via static (variable volume) or velocity (constant CFM) pressure on the inlet or outlet side of the fan. Optional, one or two, duct or room probes for use in: Multifamily structures - Apartments, condos, hotels; dryers, residential kitchens and bathrooms. Institutional facilities - Schools, prisons, multistory office buildings; bathrooms. Constant Pressure Control - Outdoor Control Vari-Green motor via static pressure on the inlet side of the fan. Includes one duct probe and transducer for use in: Multifamily structures - Apartments, condos, hotels; residential kitchen, dryer facilities and bathrooms. Institutional facilities - Schools, prisons, multistory. Air Quality VOC - Control a Vari-Green motor via changes in volatile organic compounds (VOC s). VOC s are gasses that are emitted from humans, building materials, perfumes, foods, and furniture off-gassing. Range is -2 CO 2 ppm equivalent. Institutional facilities Schools, court house, hospitals; bathrooms, waiting rooms, cafeteria. Commercial buildings Office space, conference rooms, bathrooms, break room. Air Quality Temperature and Humidity - Control Vari-Green motor via changes in temperature, humidity, or both. Range is 2 to 12 F and to 1% relative humidity. Multifamily structures Apartments, condos, hotels; bathrooms, utility rooms. Commercial buildings Office buildings; office space, conference rooms, utility rooms, bathrooms. 7

8 Options and Accessories ALUMINUM CONSTRUCTION - Aluminum construction is available for all direct drive sizes 6-16 and belt drive sizes 7-. Some drive frame components may still be of galvanized construction to maintain structural integrity. INLET AND OUTLET GUARDS - Inlet and outlet guards provide protection for non-ducted applications. Guards are fabricated of welded wire on a galvanized steel frame. They are easily removed for maintenance and inspection. BELT DRIVE MOTOR COVER AND BELT GUARD - For belt-driven fans, combination motor cover and belt guards constructed of galvanized steel are available for protection of motors, drives and personnel. Standard on units specified with UL. DIRECT DRIVE MOTOR COVER - Formed, galvanized steel motor covers are available to isolate direct drive motors from the airstream. When motor covers are furnished, vents to the exterior of the fan are provided to ensure sufficient motor cooling. INSULATED HOUSING - For noise reduction and condensation control, the interior of the fan housing can be lined with a 1-inch fiberglass duct liner. The optional motor cover can also be insulated. The table depicts the radiated sound reduction that can be obtained in each octave band for the insulated housing and motor cover together. Approximate Radiated Sound Attenuation (db) Octave Band Sizes Sizes BACKDRAFT DAMPERS - Gravity or motorized parallel blade dampers (model WD-) are available for duct mounting. These dampers feature sturdy galvanized frames, aluminum blades with vinyl blade seals, and a balanced design for minimal resistance to airflow. CONTROL DAMPERS - Square, opposed blade volume control dampers (model VCD) are available for duct mounting. These dampers feature sturdy galvanized frames, and steel blades with optional blade and jamb seals. A balanced design results in minimal resistance to airflow. INLET VANE DAMPERS - Variable inlet vane dampers (model IVDE) are available for models SQ and BSQ sizes and are factory-assembled to the fan. They can be specified for either manual or automatic operation (controls furnished by others). These dampers are constructed of heavy-gauge steel and feature uniform blade movement for positive control. Companion inlet rings for round duct connections are also available. SPEED CONTROLLERS - Available for use with shaded pole and permanent split capacitor (PSC) motors on model SQ fans. They provide an economical means of system balancing with direct drive fans. MOTOR STARTERS - The fundamental function n of a motor starter is to protect the motor from damage that can occur from overheating. With a Greenheck motor starter, you will be provided with the best motor protection available. Specific model components may include; SmartStart technology, physical interface, overload protection, disconnect, magnetic contactor, NEMA-1 or NEMA-R steel enclosures and pre-engineered easy system integration. For complete information on specific Greenheck Motor Starter models refer to greenheck.com, Products, Motor Starter page. WIRING PIGTAIL - Allows direct hook-up to the power supply eliminating field wiring at the fan. COATINGS - Wide variety of coatings and colors are available. Decorative coatings are available in sixteen standard colors. Protective coatings are available in a choice of five electrostatic applied powders providing an available selection for most environments. All Greenheck coatings and resistance charts can be found in our Performance Coatings for Commercial & Industrial s brochure. 8

9 Filter Options The filter box is designed to provide a compact and convenient clean air solution. Factory-assembled as a single unit, this fan eliminates the costly process of designing, fabricating and installing special remote filter box assemblies. Both the fan and filter section feature removable access panels on both sides to remove and replace filters, making fan maintenance simple and fast. Model Selection Procedure 1. Calculate system pressure drop and cfm requirements (not including filters). 2. Make a preliminary model size selection.. Calculate a filter pressure drop (P) for the preliminary cfm model size selected in step 2 using the equation: P = F x ( 1, ) 2 To determine the filter factor (F) refer to chart below. 4. Add the filter pressure drop (P) to the system pressure drop and make a revised model size selection. Model Model SQ Model BSQ Size Filter Box Weight 4 (18) 74 (4) 88 (4) 114 (52) 12 (54) 174 (79) 246 (112) 117 (5) 12 (54) 144 (79) 14 (64) 181 (82) 294 (1) 44 (156) 441 (2) 57 (26) 759 (44) 957 (44) 1185 (58) Filter Size 1 x 12 (254 x 5) 14 x 25 (56 x 65) 16 x 2 (46 x 58) 16 x 25 (46 x 65) 2 x 2 (58 x 58) 2 x 25 (58 x 65) 2 x 2 (58 x 58) 14 x 25 (56 x 65) 16 x 2 (46 x 58) 16 x 25 (46 x 65) 2 x 2 (58 x 58) 2 x 25 (58 x 65) 2 x 2 (58 x 58) 2 x 25 (58 x 65) 12 x 25 (5 x 65) 16 x 25 (46 x 65) 2 x 25 (58 x 65) 16 x 25 (46 x 65) 2 x 25 (58 x 65) 16 x 25 (46 x 65) 2 x 25 (58 x 65) 16 x 25 (46 x 65) 2 x 25 (58 x 65) Filter Quantity Aluminum Note: 24-inch side clearance is recommended for accessing and removing filters. All dimensions in inches (millimeters) and weight in pounds (kilograms). Filter Factor (F) 1 inch (25) 2 inch (51) Paper Filters (MERV 7) Aluminum Paper Filters (MERV 8)

10 Discharge Configurations The side discharge option helps to reduce system effect. It will increase performance and reduce installation labor. The most notable is reducing system effects. Note: The figure 1 example shows the air being discharged into the corner. It will take several duct lengths before the airflow becomes laminar or smooth again after making the turn. In figure 2, the fan is placed in the corner using a side discharge. In this configuration the air flow pattern at discharge is smooth and supports a more predictable system. Remember the duct length on the discharge side, should be approximately two to three wheel diameters to achieve catalog performance. Discharge Configuration performance will change with different discharge positions. Catalog data is based on an inline discharge. Right side discharge will give you 18% of cataloged performance and left side will give you 19% of cataloged performance. Use figure to locate the orientation to fit your application. Figures 4 and 5 on page 11, illustrate the proper side discharge definitions. Refer to Greenheck s CAPS (Computer Aided Product Selection) program or consult factory for performance modifications. Left Discharge Left, Right & Inline Discharge Figure 1 Right Discharge Left & Right Discharge Figure 2 Figure 1

11 Side Discharge SQ Side Discharge BSQ Side Discharge Left Side Discharge Access Door Inline Discharge Left Side Discharge Access Door Inline Discharge Figure 4 Height Figure 5 Height Inlet Width Right Side Discharge Inlet Width Right Side Discharge SQ Side Discharge Duct Openings Unit Size Width Height (251) (225) (27) (2) (52) (52) (4) (4) (454) (454) (55) (55) (581) (581) All dimensions in inches (millimeters). BSQ Side Discharge Duct Openings Unit Size Width Height (2) (2) (52) (52) (4) (4) (454) (454) (55) (55) (581) (581) (66) (66) (78) (78) (7) (886) (81) (164) (85) 48 (1219) (886) 5 4 (1114) All dimensions in inches (millimeters). 11

12 Horizontal and Vertical Mounting Options All SQ and BSQ fan models can be mounted horizontally, vertically or at an angle. For ease of installation, knockouts are provided at each location where mounting brackets are shown in figures 6, 7 and 8. Optional brackets are universally adjustable to mount in any of these locations. A A C F E E A A C A G B NOTE: Hanging rails by others B A F E B Figure 6 Horizontal Hanging or Base Mount With either a hanging or base mount the motor may be located on either side. The base mount allows top access panels only. F E A G B A A C A F E C Figure 7 Horizontal Hanging or Base Mount With a hanging mount, the motor may be located on either top or bottom. The base mount allows top motor location only. Both options provide access panels on two sides. D G B NOTE: Hanging rails by others D G B Figure 8 Vertical Hanging or Base Mount Mounting brackets are turned 9 degrees for vertical mounting. Access panels are located on the two sides adjacent to the motor. B D B D Model A B C D E F G SQ (27) 17 (42) 15 4 (4) (225) 19 4 (52) 7 (178) SQ (7) 2 (58) 18 4 (476) (2) 4 (192) 27 8 (695) BSQ (47) (511) 18 4 (476) (2) (1227) 27 8 (695) SQ-BSQ (47) (562) 2 4 (527) (52) (114) 24 (61) SQ-BSQ (47) 24 (61) 22 4 (578) 16 (46) 49 8 (1254) (714) SQ-BSQ (47) (664) 24 4 (629) (454) 44 (1118) 2 (584) SQ-BSQ (498) (714) 26 4 (679) (55) (1272) 28 (711) SQ-BSQ (597) 1 (787) 29 4 (756) (581) (126) (6) BSQ (648) 1 2 (851) (751) 22 4 (578) (15) (622) BSQ (74) 7 (94) 4 (857) 26 4 (679) (16) (819) BSQ (8) (1124) 4 4 (15) 7 8 (86) (1689) (816) BSQ 5 (889) 51 (1295) 47 4 (121) (18) (1756) 1 8 (797) BSQ (974) (1454) (159) 46 4 (1187) 76 (19) (881) BSQ (1197) 6 (16) (1521) (1521) (2299) (129) All dimensions in inches (millimeters). Hanging rails not included. Supplied by others. Hanging rails not included. Supplied by others. 12

13 Base Mount or Hanging Isolators J H L Standing Neoprene Isolator Complete isolation kits are available with either neoprene or spring isolators and are sized to match the weight of the specified fan size. The base isolator support brackets are designed to permit mounting of the fan with the motor located on top or either side. The hanging isolator support brackets are designed to permit mounting of the fan with the motor located on top, bottom or side. J Standing Spring Isolator Note: Hanging rods to be supplied by others. 5 8 inch (16 mm) nominal H I Model H I J K L SQ 6-75 SQ 8-95 BSQ 7-9 SQ-BSQ 1 SQ-BSQ 12 SQ-BSQ 1 SQ-BSQ 14 SQ-BSQ (5) (14) 2 (51) 6 4 (171) (59) H Hanging Neoprene Isolator BSQ 18 BSQ 2 BSQ 24 BSQ BSQ 6 BSQ (5) (14) 2 (51) All dimensions in inches (millimeters). 6 4 (171) (67) J Hanging Spring Isolator K H J 1

14 Typical Installation Models SQ and BSQ ducted inline fans are designed for the exhaust, supply or recirculation of air in a building. Typical installation requires ductwork on the inlet and outlet side of the fan. A minimum of three duct diameters is required on the inlet and outlet of the fan to minimize system effect losses. See the diagram below for a typical installation. Installations can include flexible duct connections (by others) on either the inlet or outlet side of the fan or both. The motor is rigidly mounted and can be oriented in any direction (top, bottom, side). The model BSQ ducted inline fan must be installed with the motor accessible for maintenance and inspection. External isolators are recommended, hanging (shown below) or base mounted. Installation must meet all local governing codes and the NEC. Flexible duct (by others) Wheel Diameters Wheel Diameters Model Number Code The model number system is designed to completely identify the fan. The correct code letters must be specified to designate belt or direct drive. The remainder of the model number is determined by the size and performance selected from the following pages. BSQ VG/5/A MODEL CONFIGURATION BSQ - Belt Drive Inline Exhaust SQ - Direct Drive Inline Exhaust FAN SIZE 6 through 42 PRESSURE LEVEL (Belt Drive Only) - High Pressure Wheel VG = Vari-Green (Direct Drive only) MOTOR (Belt Drive only) 6 = 1/6 7 = /4 = 4 = 1/4 1 = 1 5 = 5 = 1/ 15 = = = 1/2 2 = 2 1 = 1 MOTOR (Direct Drive only) A = 1725 D = 155 B = 114 E = 15 C = 86 G = 1 International (See CAPS for performance) K = 95 J =

15 SQ Direct Drive (225) 1 (25) 12 (5) 1 () 12 (5) Damper size = 9 x 9 (229 x 229) Unit weight** = 26 (12) Outlet velocity = x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) VG 65-D 65-G 6-E 6-VG 6-D 6-G 65-E Volume (cfm) Volume (m /hr) (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct CFM VG-1/6 E-1/14 15 B Sones CFM G-1/8 1 B Sones CFM D-1/4 155 B Sones CFM B Sones CFM VG-1/6 E-1/1 15 B Sones CFM G-1/5 1 B Sones CFM D-1/ 155 B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 15

16 SQ Direct Drive (225) 1 (25) 12 (5) 1 () 12 (5) Damper size = 9 x 9 (229 x 229) Unit weight** = 26 (12) Outlet velocity = x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) G 75-E 7-E 75-G 75-VG 7-VG 75-D 7-D (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Volume (cfm) Volume (m /hr) Motor Direct CFM VG-1/6 E-1/1 15 B Sones CFM G-1/5 1 B Sones CFM D-1/ 155 B Sones CFM B Sones CFM VG-1/6 E-1/1 15 B Sones CFM G-1/5 1 B Sones CFM D-1/ 155 B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 16

17 SQ Direct Drive (2) 1 (25) 15 (81) 16 (46) 15 (81) Damper size = 12 x 12 (5 x 5) Unit weight** = 41 (19) Outlet velocity = 1.21 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) D 85-G 8-G 85-E 8-E 8-VG 85-D 85-VG Volume (cfm) Volume (m /hr) (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct CFM VG-1/6 E-1/4 15 B or 1/4 Sones CFM G-1/2 1 B Sones CFM D-1/ B Sones CFM B Sones VG-1/6 or 1/4 E-1/4 15 G-1/2 1 D-1/ CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 17

18 SQ Direct Drive (2) 1 (25) 15 (81) 16 (46) 15 (81) Damper size = 12 x 12 (5 x 5) Unit weight** = 41 (19) Outlet velocity = 1.21 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) D 9-G 95-E 9-E 9-VG 95-D 95-G 95-VG Volume (cfm) Volume (m /hr) (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct VG-1/6 or 1/4 VG-1/6 or 1/4 95 E-1/5 15 G-1/25 1 D-1/ E-1/ 15 G-1/15 1 D-1/ CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B.... Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 18

19 SQ 1 - Direct Drive (52) 1 (25) 17 (42) 21 (5) 17 (42) Damper size = 14 x 14 (56 x 56) Unit weight** = 56 (25) Outlet velocity =.748 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) Volume (cfm) Volume (m /hr) 1725 (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct VG-1/4 C-1/8 86 B-1/6 114 A-1/ CFM B... Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 19

20 SQ 12 - Direct Drive (4) 1 (25) 19 (48) 21 (5) 19 (48) Damper size = 16 x 16 (46 x 46) Unit weight** = 67 () Outlet velocity =.571 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) Volume (cfm) Volume (m /hr) 1725 (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct CFM VG-1/2 C-1/8 86 B Sones CFM B-1/6 114 B Sones CFM A-1/ B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 2

21 SQ 1 - Direct Drive (454) 1 (25) 21 (5) 21 (5) 21 (5) Damper size = 18 x 18 (457 x 457) Unit weight** = 77 (5) Outlet velocity =.451 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) Volume (cfm) Volume (m /hr) 1725 (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct CFM VG-/4 C-1/8 86 B Sones CFM B-1/4 114 B Sones CFM A-/ B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 21

22 SQ 14 - Direct Drive (55) 1 (25) 2 (584) 22 (559) 2 (584) Damper size = 2 x 2 (58 x 58) Unit weight** = 14 (47) Outlet velocity =.64 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) Volume (cfm) 1725 (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Volume (m /hr) Motor Direct VG-/4 C-1/8 86 B-1/ VG-1 A CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 22

23 SQ 16 - Direct Drive (581) 1 (25) 26 (66) 26 (66) 26 (66) Damper size = 2 x 2 (584 x 584) Unit weight** = 16 (7) Outlet velocity =.275 x cfm Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). Static Pressure (Pa) Static Pressure (in. wg) Volume (cfm) Volume (m /hr X 1) (Direct) (Vari Green) Density.75 lb/ft Density 1.2 kg/m Motor Direct VG-/4 CFM C-1/4 86 B Sones CFM B-1/2 114 B Sones CFM VG-1 1 B Sones CFM VG-2 A B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 2

24 BSQ 7 - Belt Drive (2) 1 (25) 15 (81) * (94) *14 (56) Damper size = 12 x 12 (5 x 5) Unit weight** = 76 (4) 21 (5) * (18) 15 (81) Static Pressure Pa Static Pressure in. wg / hp 1/4 hp 1/2 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft 24 Model Number 7 Motor 7-4 1/4 7-1/ 7-5 1/ CFM B.9.7 Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/84) MAXIMUM = 2486 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) = x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

25 BSQ 8 - Belt Drive (2) 1 (25) 15 (81) * (94) *14 (56) Damper size = 12 x 12 (5 x 5) Unit weight** = 79 (6) 21 (5) * (18) 15 (81) Static Pressure Pa Static Pressure in. wg /4 hp 1/ hp 1/2 hp /4 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft Model Number 8 Motor 8-4 1/4 8-1/ 8-5 1/2 8-7 / CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/2866) MAXIMUM = 2645 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) = x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 25

26 BSQ 9 - Belt Drive (2) 1 (25) 15 (81) * (94) *14 (56) Damper size = 12 x 12 (5 x 5) Unit weight** = 84 (8) 21 (5) * (18) 15 (81) Static Pressure Pa Static Pressure in. wg /4 hp 1/2 hp 1/ hp /4 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor hp Density.75 lb/ft 26 Model Motor Number /4 9-1/ / / CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/2649) MAXIMUM = 2691 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) = x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

27 BSQ 1 - Belt Drive (52) 1 (25) 17 (42) * (94) *14 (56) Damper size = 14 x 14 (57 x 57) Unit weight** = 91 (41) 21 (5) * (18) 17 (42) Static Pressure Pa Static Pressure in. wg /4 hp 1/2 hp 1/ hp /4 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor hp Density.75 lb/ft Model Motor Number / / /2 1-7 / CFM B.72.7 Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/2517) MAXIMUM = 2556 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) =.7617 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 27

28 BSQ 12 - Belt Drive (4) 1 (25) 19 (48) * (454) *16 (46) Damper size = 16 x 16 (46 x 46) Unit weight** = 97 (44) 21 (5) * (18) 19 (48) Static Pressure Pa Static Pressure in. wg / hp 1/4 hp 1 hp /4 hp 1/2 hp 1 1/2 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft 28 Model Number 12 Motor /4 12-1/ / / CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/2144) MAXIMUM = 249 TIP SPEED (ft/min) = rpm x.46 MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) =.585 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

29 BSQ 1 - Belt Drive (454) 1 (25) 21 (5) * (454) *16 (46) Damper size = 18 x 18 (457 x 457) Unit weight** = 97 (44) 21 (5) * (18) 21 (5) Static Pressure Pa Static Pressure in. wg / hp 1/4 hp 1/2 hp 79 /4 hp 1 hp /2 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft Model Motor Number / / / / CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/222) MAXIMUM = 255 TIP SPEED (ft/min) = rpm x.45 MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) =.4571 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 29

30 BSQ 1 - Belt Drive (454) 1 (25) 21 (5) * (454) *16 (46) Damper size = 18 x 18 (457 x 457) Unit weight** = 97 (44) 21 (5) * (18) 21 (5) Static Pressure Pa Static Pressure in. wg /4 hp 1/2 hp 1/ hp 1 1/2 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 1/4 hp 79 1 hp Density.75 lb/ft Model Motor Number / / /2 1-7 / CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/277) MAXIMUM = 277 TIP SPEED (ft/min) = rpm x.45 MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) =.4571 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

31 BSQ 14 - Belt Drive (55) 1 (25) 2 (584) * (454) *16 (46) Damper size = 2 x 2 (58 x 58) Unit weight** = 111 (5) 22 (559) * (18) 2 (584) Static Pressure Pa Static Pressure in. wg /2 hp 1/ hp 1/4 hp 1 hp /4 hp 1 1/2 hp hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft Model Motor Number / / / / CFM B.1.11 Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/1682) MAXIMUM = 215 TIP SPEED (ft/min) = rpm x.812 MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) =.692 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 1

32 BSQ 14 - Belt Drive (55) 1 (25) 2 (584) * (454) *16 (46) Damper size = 2 x 2 (58 x 58) Unit weight** = 111 (5) 22 (559) * (18) 2 (584) Static Pressure Pa Static Pressure in. wg cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 1 hp 1/2 hp 1/ hp /4 hp 1 1/2 hp 79 2 hp Density.75 lb/ft 2 Model Motor Number / / / CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/264) MAXIMUM = 2641 TIP SPEED (ft/min) = rpm x.812 MAX NEMA MOTOR FRAME SIZE = 145T OUTLET VELOCITY (ft/min) =.692 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

33 BSQ 16 - Belt Drive (581) 1 (25) 26 (66) *2 1 2 (521) *17 (42) Damper size = 2 x 2 (584 x 584) Unit weight** = 28 (94) 26 (66) *1 8 (4) 26 (66) Static Pressure Pa Static Pressure in. wg cfm m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. /4 hp 1/2 hp 1/ hp 1/4 hp 1 hp 1 1/2 hp 59 2 hp hp Density.75 lb/ft Model Motor Number / / / / CFM 1671 B.1 Sones 6.6 CFM B.2.26 Sones CFM B.1.5 Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/166) MAXIMUM = 21 TIP SPEED (ft/min) = rpm x 4.84 MAX NEMA MOTOR FRAME SIZE = 184T OUTLET VELOCITY (ft/min) =.2782 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

34 BSQ 16 - Belt Drive (581) 1 (25) 26 (66) *2 1 2 (521) *17 (42) Damper size = 2 x 2 (584 x 584) Unit weight** = 28 (94) 26 (66) *1 8 (4) 26 (66) Static Pressure Pa Static Pressure in. wg /2 hp 1/ hp /4 hp 1 1/2 hp cfm m /hr Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 1 hp 69 2 hp hp Density.75 lb/ft 4 Model Motor Number / / / CFM B Sones CFM B.5.5 Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/1584) MAXIMUM = 221 TIP SPEED (ft/min) = rpm x 4.84 MAX NEMA MOTOR FRAME SIZE = 184T OUTLET VELOCITY (ft/min) =.2782 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

35 BSQ 18 - Belt Drive (66) (8) 28 (711) *24 8 (619) *18 (457) Damper size = 24 x 24 (61 x 61) Unit weight** = 245 (111) 28 (711) *1 4 (49) 28 (711) Static Pressure Pa Static Pressure in. wg /2 hp 1/ hp 1 hp /4 hp 1 1/2 hp cfm m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor hp 11 8 hp Density.75 lb/ft Model Motor Number / / / CFM B.2.24 Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/1125) MAXIMUM = 1645 TIP SPEED (ft/min) = rpm x 4.84 MAX NEMA MOTOR FRAME SIZE = 184T OUTLET VELOCITY (ft/min) =.255 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 5

36 BSQ 18 - Belt Drive (66) (8) 28 (711) *24 8 (619) *18 (457) Damper size = 24 x 24 (61 x 61) Unit weight** = 245 (111) 28 (711) *1 4 (49) 28 (711) Static Pressure Pa Static Pressure in. wg hp /4 hp 1/2 hp 1 1/2 hp cfm m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor hp hp Density.75 lb/ft 6 Model Number 18 Motor / / CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/16) MAXIMUM = 191 TIP SPEED (ft/min) = rpm x 4.84 MAX NEMA MOTOR FRAME SIZE = 184T OUTLET VELOCITY (ft/min) =.255 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

37 BSQ 2 - Belt Drive (78) (8) 2 (81) *28 (711) *2 (58) Damper size = 28 x 28 (711 x 711) Unit weight** = 14 (142) 2 (81) *16 (46) 2 (81) Static Pressure Pa Static Pressure in. wg hp /4 hp 1/2 hp 1/ hp /2 hp cfm m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 9 2 hp hp Density.75 lb/ft Model Number 2 Motor 2-1/ / / CFM B Sones CFM B..4. Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/97) MAXIMUM = 175 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 184T OUTLET VELOCITY (ft/min) =.187 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 7

38 BSQ 2 - Belt Drive (78) (8) 2 (81) *28 (711) *2 (58) Damper size = 28 x 28 (711 x 711) Unit weight** = 14 (142) Model Motor Number /2 2-7 / (81) *16 (46) 2 (81) Static Pressure Pa CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/19) MAXIMUM = 162 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 184T OUTLET VELOCITY (ft/min) =.187 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are Static Pressure in. wg hp /4 hp 1/2 hp 1 1/2 hp 2 hp hp cfm m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft

39 BSQ 24 - Belt Drive (886) (8) 9 (991) *2 7 8 (85) *22 (559) Damper size = 5 x 5 (889 x 889) Unit weight** = 415 (188) 4 (864) *19 (48) 9 (991) Static Pressure Pa Static Pressure in. wg hp 1 1/2 hp 1 hp /4 hp 1/2 hp cfm X m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 9 hp hp Density.75 lb/ft Model Motor Number / / CFM B..5 Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/76) MAXIMUM = 1225 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.1192 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 9

40 BSQ 24 - Belt Drive (886) (8) 9 (991) *2 7 8 (85) *22 (559) Damper size = 5 x 5 (889 x 889) Unit weight** = 415 (188) 4 (864) *19 (48) 9 (991) Static Pressure Pa Static Pressure in. wg hp 1 1/2 hp 7 1/2 hp cfm X m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 1 hp hp hp Density.75 lb/ft 4 Model Number Motor CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/87) MAXIMUM = 165 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.1192 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

41 BSQ - Belt Drive (164) (8) 46 (1168) 8 (965) Damper size = 42 x 42 (167 x 167) Unit weight** = 57 (244) Housing thickness = 16 ga Model Motor Number -7 / *4 (864) *22 (559) *18 (457) 46 (1168) Static Pressure Pa CFM B.57.6 Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Static Pressure in. wg hp 1 1/2 hp 1 hp cfm X m /hr X 1 MAX Bhp AT A GIVEN = (rpm/486) MAXIMUM = 967 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.826 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones /4 hp hp 75 5 hp /2 hp Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 41

42 BSQ - Belt Drive (164) (8) 46 (1168) *4 (864) *22 (559) 8 (965) Damper size = 42 x 42 (167 x 167) Unit weight** = 57 (244) Housing thickness = 16 ga Model Motor Number *18 (457) 46 (1168) Static Pressure Pa CFM B Sones CFM B Sones CFM B Sones CFM B Sones Static Pressure in. wg MAX Bhp AT A GIVEN = (rpm/62) MAXIMUM = 1196 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.826 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones hp 1 1/2 hp hp 5 hp 7 1/2 hp cfm X 1 m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor Density.75 lb/ft 42 Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

43 BSQ 6 - Belt Drive (1216) (8) 52 (121) *4 (864) *22 (559) 42 (167) Damper size = 48 x 48 (1219 x 1219) Unit weight** = 686 (11) Housing thickness = 16 ga *18 (457) 52 (121) Static Pressure Pa Static Pressure in. wg /2 hp 1 hp 7 1/2 hp 1 hp cfm X m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. 2 hp hp 5 hp Density.75 lb/ft 811 Model Motor Number CFM B.6.64 Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/7) MAXIMUM = 811 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.62 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 4

44 BSQ 6 - Belt Drive (1216) (8) 52 (121) *4 (864) *22 (559) 42 (167) Damper size = 48 x 48 (1219 x 1219) Unit weight** = 686 (11) Housing thickness = 16 ga *18 (457) 52 (121) Static Pressure Pa Static Pressure in. wg hp 1 1/2 hp 1 hp 7 1/2 hp cfm X m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. hp 5 hp Density.75 lb/ft 44 Model Motor Number CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/469) MAXIMUM = 126 TIP SPEED (ft/min) = rpm x MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.62 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are

45 BSQ 42 - Belt Drive (168) (8) 58 (147) *4 (864) *22 (559) 5 (127) Damper size = 54 x 54 (172 x 172) Unit weight** = 789 (58) Housing thickness = 14 ga *18 (457) 58 (147) Static Pressure Pa Static Pressure in. wg cfm X m /hr X 1 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). *Motor cover is optional. Size may be greater depending on motor. hp 2 hp 5 hp 7 1/2 hp 25 1 hp Density.75 lb/ft 67 Model Motor Number CFM B.68.7 Sones 6.. CFM B Sones CFM B Sones CFM B Sones CFM B Sones MAX Bhp AT A GIVEN = (rpm/4) MAXIMUM = 67 TIP SPEED (ft/min) = rpm x 11.6 MAX NEMA MOTOR FRAME SIZE = 215T OUTLET VELOCITY (ft/min) =.496 x cfm CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones CFM B Sones Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (Bhp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA International Standard 1. Values shown are 45

46 Direct Drive Specifications Model SQ Duct mounted supply, exhaust or return fans shall be of the centrifugal, direct-driven, inline type. The fan housing shall be of a square design constructed of heavy-gauge galvanized steel or aluminum and shall include square duct mounting collars. construction shall include two removable access panels located perpendicular to the motor mounting panel. The access panels must be of sufficient size to permit easy access to all interior components. The fan wheel shall be centrifugal, backward-inclined, constructed of aluminum, and shall include a wheel cone carefully matched to the inlet cone for precise running tolerances. Wheels shall be statically and dynamically balanced. Motors shall be permanently lubricated and carefully matched to the fan loads. Motors shall be readily accessible for maintenance. A NEMA-1 disconnect switch shall be provided as standard, except with explosion resistant motors, where disconnects are optional. Factory wiring shall be provided from motor to the handy box. All fans shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. shall bear a permanently affixed manufacturer s nameplate containing the model number and individual serial number for future identification. shall be model SQ as manufactured by Greenheck Corporation of Schofield, Wisconsin, USA. LEED information Greenheck became one of the first manufacturers in the Air Movement and Control industry to join the LEED/green movement when they joined the United States Green Building Council (USGBC) in 25. Greenheck has been actively researching qualification requirements for our products to meet LEED credits and prerequisites. The Vari-Green motor significantly helps qualification efforts for the Energy and Atmosphere credits and prerequisites; specifically credit one, Optimize Energy Performance and prerequisite two, Minimum Energy Performance. Vari-Green Motor Motor to be an electronic commutation (EC) motor specifically designed for fan applications. AC induction type motors are not acceptable. Examples of unacceptable motors are: Shaded Pole, Permanent Split Capacitor (PSC), Split Phase, Capacitor Start and phase induction type motors. Motors shall be permanently lubricated with heavy-duty ball bearings to match the fan load and prewired to the specific voltage and phase. Internal motor circuitry shall convert AC power supplied to the fan to DC power to operate the motor. Motor shall be speed controllable down to 2% of full speed (8% turndown). Speed shall be controlled by either a potentiometer dial mounted on the motor or by a -1 VDC signal. Motor shall be a minimum of 85% efficient at all speeds. Vari-Green Controls Constant Pressure Greenheck s Constant Pressure system shall be a complete package designed to regulate fan speed based on demand while maintaining a constant static pressure. System shall include fan with Vari- Green Motor, Vari-Green Constant Pressure control, transformer, and pressure tap. Vari-Green Constant Pressure control shall have the transducer integrated with a touch button control panel. Control shall have a run mode and a program mode preventing unwanted changes when in run mode. Transformer shall be factory-supplied to provide power to the Vari-Green Constant Pressure controller. System shall include a self-sealing aluminum pressure tube with ¼-inch connection. shall be centrifugal direct drive type in upblast, downblast, or inline configuration with controllable EC Vari-Green motor. Remote Dial Remote dial shall be a Vari-Green control specifically designed to provide -1 VDC signal to Greenheck s Vari-Green Motor. 2-Speed 2-Speed control shall be a Vari-Green Control specifically designed to allow the Vari-Green Motor to operate at two distinct speeds. 2-Speed Control shall include two dials that may be set at any point between and 1 VDC and an integral transformer capable of reducing 115/2 volt AC power to 24 volt AC power. 46

47 Belt Drive Specifications Model BSQ Duct mounted supply, exhaust or return fans shall be of the centrifugal, belt-driven, inline type. The fan housing shall be of a square design constructed of heavy-gauge galvanized steel or aluminum and shall include square duct mounting collars. construction shall include two removable access panels located perpendicular to the motor mounting panel. The access panels must be of sufficient size to permit easy access to all interior components. The fan wheel shall be centrifugal backward-inclined, constructed of aluminum and shall include a wheel cone carefully matched to the inlet cone for precise running tolerances. Wheels shall be statically and dynamically balanced. Motors shall be heavy-duty ball bearing type carefully matched to the fan load and furnished at the specified voltage, phase, and enclosure. Motors and drives shall be mounted out of the airstream. Motors shall be readily accessible for maintenance. Precision ground and polished fan shafts shall be mounted in permanently sealed, lubricated pillow block ball bearings. Bearings shall be selected for a minimum L 1 life in excess of 1, hours (L 5 average life in excess of 5, hours) at maximum cataloged operating speed. Drives shall be sized for a minimum of 15 percent of driven horsepower. Pulleys shall be of the fully machined cast iron type, keyed and securely attached to the wheel and motor shafts. Motor pulleys shall be adjustable for final system balancing. A NEMA-1 disconnect switch shall be provided as standard, except with explosion resistant motors, where disconnects are optional. Factory wiring shall be provided from motor to the handy box. shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. shall bear a permanently affixed manufacturer s nameplate containing the model number and individual serial number for future identification. shall be model BSQ as manufactured by Greenheck Corporation of Schofield, Wisconsin, USA. 47

48 Quick Delivery and Quick Build Programs Greenheck Corporation offers an extensive selection of Quick Delivery (QD) and Quick Build (QB) offerings. The QD program is Greenheck s stock program and the QB program offers configurable fans in one, three, five, or ten days. Model SQ-75 through 12 and 14 BSQ-7 through 12, 14 through 18 and 24 SQ-6 through 7, 1 and 16 BSQ-1 and 2 High Pressure BSQ-1 through 24 BSQ- through 42 High Pressure BSQ- and 6 Hundreds of in stock ventilation products and accessories are available for shipment to your jobsite in less than 24 hours from our strategically located warehouses throughout the world. The Greenheck Stock and Quick Build catalog is a great resource for specific options and accessories available with QD and QB fans. Best Available Program In Stock 1 Day Days Our Commitment As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the Library under Warranties. Prepared to Support Green Building Efforts P.O. Box 41 Schofield, WI Phone (715) greenheck.com.f&v.116 R IP Copyright 21 Greenheck Corp.