Turbo Fan E-CAT-F-KT-01-B

Transcription

1 Turbo Fan

2 Centrifugal Blower KT Type KTS Type Purpose - For ventilation of dryer, dust collector and selector, etc. - For cooling of equipment - For general blower Features. A diverse lineup 2. Realizes noise reduction by adoption of newly designed fans based on fluid analysis technology 3. Realizes high efficiency by adoption of newly designed fans based on fluid analysis technology Achieves 8.5% of total voltage efficiency for 3.7kW products 4. Capable of handling up to 50 C gas temperature for standard specifications (0.75kW and.5 3.7kW products) 5. Capable of handling up to C gas temperature for heat-resistant type. Capable of handling outdoor specifications 7. Capable of handling high static pressure and stainless welding gas portion (0.75kW and.5 3.7kW products) 8. Capable of handling high efficiency and overseas regulations and responds to various special motors of increased-safety and explosion-proof type, pressure-resistant and explosion-proof type, etc., by adoption of general-purpose motor. (0.75kW and.5 3.7kW products) description, KT: Direct acting turbo fan, KTS: Direct acting stainless turbo fan Frequency, type 5: 50Hz, :0Hz, B: high static pressure type (only 0Hz), No: double as 50Hz and 0Hz Output, 00: 0.kW, 0: 0.2kW, 0: 0.4kW, 075: 0.75kW, 00:.0kW, 50:.5kW, 2: 2.2kW, 370: 3.7kW Power supply, S: single phase, T: three phases (No: three phases) Handling gas temperature, No: standard type, T: heat-resistant type Discharge direction, TH: top horizontal, TV: top vertical, BH: bottom horizontal Rotation direction (from a motor), R: clockwise, L: counterclockwise Please note that the equipment in the photo represent examples and may differ slightly from actual equipment. Standard specifications / special specifications / standard accessories / special accessories ) KT type (output: kW,.0kW) Standard / special specifications Conduction method Ambient temperature Handling gas temperature Voltage Coating Discharge / rotation directions Items Standard type Heat-resistant type boss Standard material Discharge direction Rotation direction Equipment specifications Direct acting of motor 0 C 0 0 C * 0 C * 0V(50Hz)/0V(0Hz) Different voltage ADC2 SECC FCD450 Acrylic resin coating (silver color, except for motors) Bottom horizontal Top horizontal, top vertical R rotation L rotation Standard spec.special spec. Specifications * 2 * In the case of inverter operation, the handling gas temperature is -0 to C. *2 The heat-resistant type is in the special specifications. Standard accessories Items Suction screen Discharge screen Suction damper *3 Accessory for only 00 and 0 Standard Type Heat-resistant Type * 3 * 3 Special accessories Rubber vibration-proof mount, foundation bolt, expansion joint, damper, silencer 2

3 KT Type KTS Type Centrifugal Blower 2) KT type (Output: 0.75kW,.5-3.7kW) Standard / Special Specifications Items Conduction method Ambient temperature specifications Standard (Made by Toshiba) Heat-resistant type (Made by Toshiba, dedicated heat-resistant specification) Specifications of Manufacturer other than Toshiba Handling gas High efficiency type Increased-safety and explosion-proof type Pressure-resistant and explosion proof type Voltage boss Coating Standard material Seal material Discharge / rotation directions Discharge direction Rotation direction Equipment specifications Direct acting of motor 0 C Temperature 0 50 C * 0 C * 0 0 C * 0 0 C * 0 0 C * 0 0 C * 0V(50Hz)/0-2V(0Hz) Different voltage AC4C SECC FCD450 Silicon resin coating (Silver color, except for motors) Sealing material, heat resistance C Packing, heat resistance C Top horizontal / top vertical / bottom horizontal Angle of 45 degrees (downward angle of 45 degrees is not available) L rotation / R rotation Standard spec.special spec. Specifications * In the case of inverter operation, the handling gas temperature is -0 to C. Standard accessories Special accessories Items Standard type Heat-resistant type Rubber vibration-proof mount, foundation bolt, expansion joint, damper, suction filter, silencer Suction screen Suction damper Shaft seal 3) KTS type, stainless welding gas portion Standard / special specifications Items Conduction method Ambient temperature specifications Standard (Made by Toshiba) Heat-resistant type (Made by Toshiba, dedicated heat-resistant specification) Specifications of Manufacturer other than Toshiba Handling gas High efficiency type Increased-safety and explosion-proof type Pressure-resistant and explosion proof type Voltage boss Coating Standard material Seal material Discharge / rotation directions Discharge direction Rotation direction Equipment specifications Direct acting of motor 0 C Temperature 0 50 C * 0 C * 0 0 C * 0 0 C * 0 0 C * 0 0 C * 0V(50Hz)/0-2V(0Hz) Different voltage SUS303 Silicon resin coating (Silver color, except for motors) Sealing material, heat resistance C Packing, heat resistance C Top horizontal / top vertical / bottom horizontal Angle of 45 degrees (downward angle of 45 degrees is not available) L rotation / R rotation Standard spec.special spec. Specifications * In the case of inverter operation, the handling gas temperature is -0 to C. Standard accessories Special accessories Items Standard type Heat-resistant type Rubber vibration-proof mount, foundation bolt, expansion joint, damper, silencer Suction screen Suction damper Shaft seal 3

4 Centrifugal Blower KT Type KTS Type Selection chart 50Hz Static voltage (kpa) Sound level: Front of blower suction m Air volume m 3 /min 0Hz Standard High static pressure Static voltage (kpa) Sound level: Front of blower suction m Air volume m 3 /min 4

5 KT Type KTS Type Centrifugal Blower Development drawing ) KT type (output: kW,.0kW) key (Note 3) tap washer (Note 3) tap bolt (Note 3) Suction screen base Round flange Hexagon socket head screw (Note 3) Seat packing Note ) The damper is installed on the round flange after suction phase flange and seat packing are removed. Note 2) The discharge screen is attached to 0.kW and 0.2kW products. Note 3) An impeller can be secured using a hexagon socket head screw on 0.kW, 0.2kW or 0.4kW products and using impeller key, impeller tap washer and impeller tap bolt for.0kw products Discharge screen (Note 2) Seat packing Damper (Note ) 2) KT type (output: 0.75kW,.5-3.7kW) base Shaft seal Shaft seal pusher key tap bolt Packing Baffle Screen Damper tap washer base Note) There is no baffle for 3.7kW products and a damper is installed directly on the suction phase flange (casting). Note) There is neither damper nor baffle on heat-resistant type products. Suction phase flange Packing Discharge phase flange 3) KTS type base Ring Shaft seal Shaft seal pusher key tap bolt tap washer base 5

6 Centrifugal Blower KT Type Assembly drawing Dimensional table -00S -00T -0S -0T -0S -0T -00T Output (kw) Body Base A D E E2 F H L O G M N Q R G2 M2 N2 Q2 R2 I J S U V V2 X Only three-phase products are available for inverter operation. Note) Take precautions for use of inverter In order to avoid abnormal vibration, jump resonance frequency of eigenvalues such as blower, motor, blower+foundation by setting of inverter. Foundation bolt hole 4 0 hole 4 0 hole 4 0 hole 4 0 hole 4 0 hole 4 0 hole 4 2 hole Approximate mass (kg) (Including a motor)

7 KT Type Centrifugal Blower Assembly drawing Dimensional table 50Hz KT-5075 KT-550 KT-52 KT-5370 Output Body Base (kw) A B C D E F H L G N Q T E M P R I J S U U2 V V2 V3 X Foundation bolt hole 8 2 hole 8 5 hole 8 5 hole 8 5 hole Approximate mass (kg) (Not Including a motor) Hz KT-075 KT-50 KT-2 KT-370 KT-B075 KT-B50 KT-B2 KT-B370 Output Body Base (kw) A B C D E F H L G N Q T E M P R I J S U U2 V V2 V3 X Foundation bolt hole 8 2 hole 8 5 hole 8 5 hole 8 5 hole 8 2 hole 8 5 hole 8 5 hole 8 5 hole Approximate mass (kg) (Not Including a motor) Also models with the discharge direction of TV-L, TH-L and BH-L can be manufactured as a standard. Note) For installation of a blower, use 4 foundation bolt holes of U2 dimension pitch with 2 bolts (one side). Or use 4 foundation bolt holes (spare) of V2 dimension pitch with 2 bolts (one side). Note) Take precautions for use of inverter In order to avoid abnormal vibration, jump resonance frequency of eigenvalues such as blower, motor, blower+foundation by setting of inverter. 7

8 Centrifugal Blower KTS Type Assembly drawing Dimensional table 50Hz S-5075 KTS-550 KTS-52 KTS-5370 Output (kw) Body A B C D D2 D3 E E2 F G H K K2 K3 L L2 M N O P Q Base I J S U U2 V V2 V3 X Thickness Foundation bolt hole Approximate mass (kg) (Not including a motor) S t3 4 2 hole 2 KTS t 4 5 hole 30 KTS t 4 5 hole KTS t 4 5 hole 0 0Hz KTS-075 KTS-50 KTS-2 KTS-370 KTS-B075 KTS-B50 KTS-B2 KTS-B370 Output (kw) Body A B C D D2 D3 E E2 F G H K K2 K3 L L2 M N O P Q Base I J S U U2 V V2 V3 X Thickness Foundation bolt hole Approximate mass (kg) (Not including a motor) KTS t3 4 2 hole 2 KTS t 4 5 hole 30 KTS t 4 5 hole KTS t 4 5 hole 0 KTS-B t3 4 2 hole 2 KTS-B t 4 5 hole 30 KTS-B t 4 5 hole KTS-B t 4 5 hole 0 -Also models with the discharge direction of TV-L, TH-L and BH-L can be manufactured as a standard. Note) For installation of a blower, use 4 foundation bolt holes of U2 dimension pitch with 2 bolts (one side). Or use 4 foundation bolt holes (spare) of V2 dimension pitch with 2 bolts (one side). Note) Take precautions for use of inverter In order to avoid abnormal vibration, jump resonance frequency of eigenvalues such as blower, motor, blower+foundation by setting of inverter. 8

9 KT Type Centrifugal Blower Internal structure drawing ) KT type (Output: kW) Code Part name hub tap bolt Suction flange table Qty ADC2 SECC FCD450 SCM435 ADC2 SPHC 2) KT type (output:.0kw) Code Part name hub tap washer tap bolt key tap bolt Suction flange table Qty ADC2 SECC FCD450 SS0 SWCH S45C SCM435 ADC2 SPHC 9

10 Centrifugal Blower KT Type KTS Type 3) KT type (output: 0.75kW,.5-3.7kW) Code Part name Qty boss tap washer tap bolt key base base Shaft seal Shaft seal pusher AC4C SECC FCD450 SS0 S45C * * In the case of KT-5370(T), 370(T) and B370(T), material of suction phase flange is AC2B. 4) KTS type Code Part name boss tap washer tap bolt key base base Shaft seal Shaft seal pusher Qty SUS303 SUS303 S45C 0

11 MEMO

12 Head Office, Moriwake, Miyuki-cho, Fukuyama-city, Hiroshima, , Japan Tel Fax Room 00, 0/F, Olympia Plaza, 255 King s Road, North Point, Hong Kong Tel Fax Moo Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 30 Thailand Tel Fax No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 09, China Tel Fax E-CAT-F-KT-0-B