TPE /2 U-G-A-BUBE

Transcription

1 Position Count Description Unit price 1 TPE 824/2 UGABUBE On request Product No.: Singlestage, centrifugal, inline, singlehead pump. The inline design with opposite suction and discharge ports enables mounting in pipework or on a concrete foundation. The shaft seal is a corrosion resistant maintenancefree mechanical seal. The pump is fitted with a threephase MLE motor with frequency converter and PIcontroller integrated in the motor terminal box. No additional motor protection is required as both motor and electronics are protected by integrated overload and temperature protection. External sensor can be connected if controlled pump operation based on for example flow, differential pressure or temperature is required. A control panel enables setting of required setpoint as well as setting of pump to MIN or MAX operation or to STOP. The control panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos R1 Remote Control enabling further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for the connection of: Pump start/stop (potentialfree contact), external remote setpoint setting via analog signal, 5 V, 1 V, (4) 2 ma, 5 V voltage supply for setpoint potentiometer, Imax = 5 ma, Product photo could vary from the actual product 1/6

2 Position Count Description Unit price sensor, 5 V, 1 V, (4) 2 ma, 24 V voltage supply for sensor, Imax = 4 ma, input for forced control to MIN or MAX (potentialfree contact), potentialfree fault signal relay with changeover contact, RS485 GENIbus. Liquid: Liquid temperature range: F Liquid temp: 68 F Technical: Actual calculated flow: Resulting head of the pump: Shaft seal: Maximum operating pressure: Materials: Pump housing: Impeller: 161 US gpm 49.8 ft BUBE 145 psi Cast iron ENJL 14 ASTM 25 B Stainless steel DIN W.Nr AISI 34 Installation: Maximum ambient temperature: 14 F Maximum operating pressure: 145 psi Flange standard: ANSI Pipe connection: 3" Pressure stage: Class 125 Flange size for motor: 182TC Electrical data: Motor type: 9FA Number of poles: 2 Rated power P2: 3 HP Main frequency: 6 Hz Rated voltage: 3 x 2823 V Rated current: 8.3 A Cos phi power factor:.95 Rated speed: 346 rpm Enclosure class (IEC 345): 55 Insulation class (IEC 85): F Others: Gross weight: 138 lb 2/6

3 Description Product name: Value TPE 824/2 UGABUBE UGA BUBE Product Number: EAN number: Technical: Actual calculated flow: 161 US gpm Resulting head of the pump: 49.8 ft Head max: 78.7 ft Shaft seal: BUBE Maximum operating pressure 145 psi Pump Number: Pump version: U Materials: Pump housing: Impeller: Material code: Cast iron ENJL 14 ASTM 25 B Stainless steel DIN W.Nr AISI 34 A H (ft) 5 8 % 4 7 % 3 6 % 2 5 % 1 4 % 25 % P (HP) % 9 % TPE 824/2 M12 3* 22 V, 6 Hz Pumped liquid = Water Liquid temperature = 68 F Density = 62.4 lb/ft³ Q(US gpm) P1 P2 Installation: Maximum ambient temperature: 14 F Maximum operating pressure 145 psi Flange standard: ANSI Connect code: G Pipe connection: 3" Pressure stage: Class 125 Flange size for motor: 182TC 6 9/16" 3 15/16" 3 15/16" 4 3/4" 1 3/8" Liquid: Liquid temperature range F Liquid temp: 68 F Electrical data: Motor type: 9FA Number of poles: 2 Rated power P2: 3 HP Main frequency: 6 Hz Rated voltage: 3 x 2823 V Rated current: 8.3 A Cos phi power factor:.95 Rated speed: 346 rpm Enclosure class (IEC 345): 55 Insulation class (IEC 85): F Motor protection: NONE Motor Number: /16" 5" 6" 7 9/16" Group 2 3/4" NC C NO L1 L2 L3 25 9/16" Group 3 3 7/8" 6 11/16" 9 1/2" 19" NPT 1/4 Others: Gross weight: 138 lb Config. file no: V /42 ma 42 ma 1/ B Y A 1: Digital input 9: GND (frame) 8: +24 V 7: Sensor input B: RS485B Y: Screen A: RS485A Group 1 STOP /42 ma 1 V RUN 1K : GND (frame) 5: +1 V 4: Setpoint input 3: GND (frame) 2: Start/stop 3/6

4 TPE 824/2 6 Hz cos phi eta 1 TPE 824/2 + 9FA 3 HP 3* 22 V, 6 Hz I (A) 1 cos phi.8 I eta n (rpm) 3 n P2(HP) P1 P1 (kw) n = 1 % 4/6

5 TPE 824/2 6 Hz M12 4 3/4" 6 9/16" 3 15/16" 3 15/16" 1 3/8" 3/4" 25 9/16" 3 7/8" 6 11/16" NPT 1/4 3 3/16" 5" 6" 7 9/16" 9 1/2" 19" Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 5/6

6 TPE 824/2 6 Hz NC C NO Group 2 L1 L2 L3 Group 3 1 V /42 ma 42 ma 1/ B Y A 1: Digital input 9: GND (frame) 8: +24 V 7: Sensor input B: RS485B Y: Screen A: RS485A Group 1 STOP /42 ma 1 V RUN 1K : GND (frame) 5: +1 V 4: Setpoint input 3: GND (frame) 2: Start/stop All units are [mm] unless otherwise presented. 6/6