IWAKI CHEMICAL GEAR PUMPS
|
|
- Dorothy Pearson
- 5 years ago
- Views:
Transcription
1 IWAKI CHEMICAL EAR PUMPS
2 Fine ceramic used in internal gear The Iwaki series chemical pump is the first internal gear pump designed for chemical process applications, in which gears of fine ceramic (SiC and Silicon nitride) are used. Our pump technology, developed over more than 0 years, has made it possible for Iwaki to equip standard pumps with fine ceramic gears. Without detracting from any of the advantages of conventional internal gear pumps abrasion, chemical, lowviscosity characteristics and sealing characteristics have been remarkably improved. In addition to the gland packing/mechanical seal type (Model X), magnetic drive sealless type (Model M) are available as standard products for an expanded range of uses. The series is an advanced gear pump, capable of dealing with a wide range of industrial processes which continue to increase in sophistication. Ceramic vs stainless steel gear comparison Type of gear Ceramic gear Heat-treated Metal gear Hard coated Corrosion Thermal Seizing Exfoliation Abrasion Coefficient of friction Impact ood Please contact us for details No good 1
3 IWAKI CHEMICAL EAR PUMPS Both high viscosity and low viscosity liquids can be handled When a low-viscosity liquid is handled by a conventional gear pump, "jamming" and "seizing" tend to occur. SiC ceramic gears do not have this problem even when the pump functions at a high speed. Silicon nitride ceramic gears show stable performance in handling high viscous liquids, due to their strength and toughness. Ability to handle fine slurries Now that gears and other sliding components including bearings are made of ceramic, the handling of fine slurries hard and soft will not impair the longevity of these pumps. Do not specify M type for slurry applications. Performance has been noticeably improved. Ceramic gears make it possible to reduce spaces between parts, therefore outperforming conventional metal gear models. Quiet liquid transfer with less pulsation Performance comparison curves In the graph below, changes in output at varying discharge pressures are compared between the series pump and a metal gear pump. The graph shows that the series, which employs ceramics gears, is far less subject to declining output under high pressure due to its close seal clearance in the gear housing. L/min Without the pulsation that is common to reciprocating pump and general use type gear pumps, liquid is transferred quietly and smoothly no agitating or foaming. High self-priming ability Because the suction port is at the top of the pump, the pump chamber remains full when pump stops working. Self-priming is enhanced at re-start. Constant flow injection Regardless of the temperature change, viscous liquid can be handled at accurate flow rate, which cannot do with other pumps. As the output is linearly related to rpm, the flow rate is easily controlled by changing speed. Magnetic drive type added to standard line Superior anticorrosive materials such as silicon carbide, silicon nitride, alumina ceramic, PTFE, carbon and stainless steel are used in liquid ends so that all sorts of chemical liquids can be handled. M is ideal for handling chemical liquids which need strict control on liquid leakage and air contact. 0 X-2 Metal gear pump 0. MPa Improved performance characteristics M type X type 2
4 Construction ear housing O-ring Bearing Pinion Internal gear Port housing gasket Cover ear housing Bearing Internal gear Dowel pin Pinion Side plate O ring Operating principle A pinion (drive gear) coupled with a shaft supported by two bearings meshes with an internal gear (driven gear) whose periphery is supported by a strong bearing. Liquid is transfered by a change in the capacity of this meshed portion. In the suction process, the gears are disengaged and a space defined by the two gears and the casing expands. The liquid is drawn into the space by the negative pressure generated. In the discharge process, their teeth begin to mesh and space defined by the two gears and the casing is reduced to force out the liquid. IN OUT OUT Left or right discharge port selection 3
5 IWAKI CHEMICAL EAR PUMPS Construction / Wet end materials X type M-1 type exploded view Parts ear housing Port housing Cover Side plate Seal case Internal gear Pinion Shaft Bearing asket / O-ring land packing Mechanical seal Wet end materials SCS14 SCS14 or SiC SiC or Si3N4 SUS630Equi. or /Cr2O3 Carbon or SiC PTFE PTFE /Al2O3/Carbon/PTFE /SiC/SiC/PTFE M type Seal case Drive magnet ass y Magnet capsule Parts 1 ear housing 2 Port housing 3 Cover 4 Side plate Seal case 6 Internal gear 7 Pinion 8 Magnet capsule 9 Bearing asket / O-ring Wet end materials SCS14 /SUS304 SiC SiC SUS329J1/ Carbon PTFE 4
6 Identification codes X - 1 S K K - 04 M C - T Pump type X: land packing or mechanical seal M: Magnetic drive Pump size 12: 1.0mL/rev 1: 3.3mL/rev 2: 12.8mL/rev 32: 2.0mL/rev ear material *1 K: SiC/SiC N: Si3N4/SiC X *2: Other materials Housing material S: Stainless steel X *2: Other materials Bearing material C: Carbon K: SiC Shaft seal : land packing seal W: land packing seal (Water injection type) M: Mechanical seal (Carbon / Al2O3) C: Mechanical seal (SiC / SiC) O: Magnetic drive (M type) Motor output 02: 0.2kW 04: 0.4kW (0.37kW) 07: 0.7kW 1: 1.kW 22: 2.2kW 37: 3.7kW (4kW) Motor type M: 4P motor S: 6P motor F: Inverter motor Special specifications *2 J: Equipped with heat jacket T: Equipped with torque limiter JT: Equipped with heat jacket and torque limiter DT: Tandem mechanical seal type DD: Double mechanical seal type S: Other special specifications Motor specifications Blank: TEFC, indoor type A: Increased safety, outdoor type B: Explosion-proof, outdoor type C: TEFC, outdoor type 3: eared motor (Reduction ratio 1/3) M-LJ : eared motor (Reduction ratio 1/) M-LJ H3: Inverter geared motor (Reduction ratio 1/3) M-LJZ H: Inverter geared motor (Reduction ratio 1/) M-LJZ N: Variable speed motor NRXM N3: Variable speed motor (Reduction ratio 1/3) NRXM N: Variable speed motor (Reduction ratio 1/) NRXM N6: Variable speed motor (Reduction ratio 1/6) NRXM X *2: Other motors *1. Pinion/Internal gear *2. Special specifications Specifications Model X-12 X-1 X-2 X-32 M-12 M-1 M-2 M-32 Discharge per revolution ml/rev Max. speed rpm 1800 *1. These are maximum values, which vary depending on motor speed and liquid viscosity. *2. Motor speed and motor output suited to the viscosity of your liquid should be selected. *3. These are values with clear water at 2 C. Max. discharge pressure Temp. range Viscosity range Vacuum MPa *1 C mpa s *2 KPa * , Connections IN OUT Rc 1 /2 Rc 3 /8 Rc 1 /2 Rc 3 /8 Rc1 Rc 3 /4 Rc1 1 /4 Rc1 Rc 1 /2 Rc 3 /8 Rc 1 /2 Rc 3 /8 Rc1 Rc 3 /4 Rc1 1 /4 Rc1 Standard pumps selection table Model X-12 M-12 X-1 M-1 Viscosity range mpa s 0. viscosity<1 1 viscosity<9 9 viscosity< viscosity<00 00 viscosity< viscosity viscosity<1 1 viscosity<9 9 viscosity 0 0. viscosity<1 1 viscosity<9 9 viscosity< viscosity<00 00 viscosity< viscosity viscosity<1 1 viscosity<30 30 viscosity 0 Pump specifications 0/60Hz Max. pressure MPa 0.3 / / / / / / / / 1.0 Max. flow rate L/min 1.4 / / / / / / / / / / /.6 Motor 4P, 0.2kW 6P, 0.2kW 4P, 0.4kW, 1/3 4P, 0.4kW, 1/ 4P, 0.2kW 4P, 0.2kW 4P, 0.4kW 6P, 0.4kW 4P, 0.4kW, 1/3 4P, 0.4kW, 1/ 4P, 0.2kW 4P, 0.4kW Caution: To protect pump install strainer and safety valve. Strainer mesh depends on liquid. For water or equivalent 0 to 10 mesh is recommended. Ask us for details. Model X-2 Viscosity range mpa s 0. viscosity<9 9 viscosity< viscosity<00 00 viscosity< viscosity 000 Pump specifications 0/60Hz Max. pressure MPa 1.0 / 1.0 Max. flow rate L/min 18.0 / / / / 4.6 Motor 4P, 0.7kW 4P, 1.kW 6P, 1.kW 4P, 0.7kW, 1/3 4P, 0.7kW, 1/ M-2 0. viscosity<30 4P, 0.7kW 18.0 / viscosity 0 4P, 1.kW X viscosity<9 4P, 2.2kW 9 viscosity<0 3.2 / viscosity<200 4P, 3.7kW 1.0 / viscosity< / P, 2.2kW 00 viscosity< / 1.0 4P, 1.kW, 1/3 00 viscosity< viscosity / 9.0 4P, 1.kW, 1/ M viscosity<30 4P, 2.2kW 3.2 / viscosity 0 4P, 3.7kW The recommended gear materials are K(SiC/SiC) for a viscosity below 200mPa s and N(Si3N4/SiC) for above 200mPa s. For handling liquids containing slurry, sticky liquids, liquids that harden easily, etc., select a model with a torque limiter. Please ask us for information on pumps with torque limiters.
7 IWAKI CHEMICAL EAR PUMPS Performance chart Viscosity (mpa s) The chart on the left shows output at a discharge pressure of 0MPa. The output changes in proportion to rpm, but rpm should be reduced when pumping viscous liquid. Knowing required output and viscosity, the proper pump/motor rpm can be selected as in the following example STEP Mark the value of your required output (L/min) on the scale on the left, and draw a horizontal line to the right. Output (L/min) STEP Mark the value of your viscosity (00mPa s) on the scale at the top and draw a line downward. In the event your viscosity falls in the middle of two scale lines, select the line on the left (the higher value). STEP Extend the intersected point to the left horizontally until intersecting the first pump line (X/M-2). This point specifies pump. STEP Draw a downward line from rpm. to specify motor Revolution (rpm) For slurries For soft slurries, reduce rpm by 7%. For hard slurries, reduce rpm by 0%. In principle, only slurries of less than m in diameter can be handled. M type pumps cannot handle slurries. Viscosity-leakage coefficient graph Coefficient of leakage (L/min)/(MPa) Viscosity (mpa s) When discharge pressure rises The lower the viscosity, as discharge pressure rises, the lower the output will be. You can estimate the actual output, in case of a change in viscosity or discharge pressure, from the following formula. (See note below). = K x (1) Qc = q x N/00 - x P-(2) Qc : Estimated output (L/min) q : Output per revolution (ml/rev) N : rpm P : Effective differential pressure (MPa) : Coefficient of leakage (L/min)/(MPa) : Viscosity (mpa s) K : Constant X/M-12 : K=3 X/M-1 : K=. X/M-2 : K=9. X/M-32 : K=1 For the value of the coefficient of leakage in formula (1), see the viscosity-leakage coefficient graph. 6
8 IWAKI CHEMICAL EAR PUMPS Applications Non pulsating constant flow injection of bonding solution in the manufacturing process of copper foil. Constant flow spraying of oil laden water (waste liquid burning equipment) Constant flow transfer of magnetic slurry Constant flow transfer of paint or dye slurry Constant flow flocculant injection Constant flow injection of paper reinforcing agent Spraying of glazing agent in ceramic manufacturing Enamel manufacturing Dimensions in mm X type g o M type g o r H s c k p H s k c p d a W e n m i j q f b L 4-ø12 d a W e i j f L 4-ø12 Model Motor a b c d e f g H i j k L m n W o p q r s X-12S X-1S M-12S M-1S X-2S M-2S X-32S M-32S 02MC 04MC 02SC 04SC 04 02MC 04MC 07MC 1MC 1SC 07 07MC 22MC 37MC 22SC 1 22MC mm Mass kg Less motor Rc1/8 Rc1/ Rc1/2 Rc3/ Rc1/4 Rc1/ Rc1 Rc3/ Rc3/8 Rc1/ Rc1-1/4 Rc Note: The dimensions may differ with the type of motor installed. 6-6 Kanda-Sudacho 2-chome Chiyoda-ku Tokyo 1-88 Japan TEL : (81) FAX : IWAKI has global net work. Please find your distributor location at European office ermany Holland Italy Spain Belgium Denmark Finland France Norway Sweden U.K. : IWAKI Europe mbh : IWAKI Europe mbh : IWAKI Europe mbh (Netherlands Branch) : IWAKI Europe mbh (Italy Branch) : IWAKI Europe mbh (Spain Branch) : IWAKI Belgium N.V. : IWAKI Nordic A/S : IWAKI Suomi Oy : IWAKI France S.A. : IWAKI Norge AS : IWAKI Sverige AB : IWAKI Pumps (UK) Ltd. TEL: (49) TEL: (49) TEL: (31) TEL: (39) TEL: (34) TEL: (32) TEL: (4) TEL: (38) TEL: (33) TEL: (47) TEL: (46) TEL: (44) FAX: FAX: FAX: (49) FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: ( )Country codes Caution for safety use: Before use of pump, read instruction manual carefully to use the product correctly. Legal attention related to export. U.S.A. Argentina Singapore Indonesia Malaysia Australia Hong Kong China Korea Taiwan Thailand Vietnam : IWAKI America Inc. : IWAKI America Inc. (Argentina Branch) : IWAKI Singapore Pte Ltd. : IWAKI Singapore (Indonesia Office) : IWAKIm Sdn. Bhd. : IWAKI Pumps Australia Pty Ltd. : IWAKI Pumps Co., Ltd. : FTZ IWAKI Engineering & Trading Co., Ltd. : IWAKI Pumps (Shanghai) Co., Ltd. : IWAKI Korea Co.,Ltd. : IWAKI Pumps Taiwan Co., Ltd. : IWAKI (Thailand) Co.,Ltd. : IWAKI Pumps Vietnam Co., Ltd. TEL: (1) TEL: (4) TEL: (6) TEL: (62) TEL: (60) TEL: (61) TEL: (82) TEL: (86) TEL: (86) TEL: (82) TEL: (886) TEL: (66) TEL: (84) Actual pumps may differ from the photos. Specifications and dimensions are subject to change without prior notice. For further details please contact us. Our products and/or parts of products fall in the category of goods contained in control list of international regime for export control. Please be reminded that export license could be required when products are exported due to export control regulations of countries. FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: The posting and copying from this catalogue without permission is not accepted firmly. CAT-W PDF
IWAKI CHEMICAL GEAR PUMPS
IWAKI CHEMICAL EAR PUMPS Fine ceramic used in internal gear The Iwaki series chemical pump is the first internal gear pump designed for chemical process applications, in which gears of fine ceramic (SiC
More informationMain material GFRPP IWAKI MAGNETIC DRIVE PUMPS
Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical
More informationMax. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationMagnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
More informationMagnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
More informationMDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationSMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE
SMX-F series Self-priming magnetic drive pumps Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation Self-priming magnetic drive pumps Main material CFRETFE The SMX-F
More informationMain material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS SMX-F PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN
Main material CFREFE IWAKI SELF-PRIMING MAGNEIC DRIE PUMPS SM-F PAEN JAPAN / U.S.A. / EU / CHINA / AIWAN Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation he
More informationIwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended
More informationMETALLIC CENTRIFUGAL MAGNETIC DRIVE PUMPS MP M MMP MTFO
METALLIC CENTRIFUGAL MAGNETIC DRIVE PUS M M MTFO Small / Medium Sized Standard Centrifugal Pumps» Compact, metallic centrifugal magnetic drive pumps» Excellent heat and pressure resistance» Cover a wide
More informationIWAKI MAGNETIC DRIVE PUMPS MX-F
IAKI MAGNEIC DRIE PUMPS Chemically resistant magnetic drive pumps which can tolerate abnormal operation he series development was based on the concept of optimum reliability under severe operating conditions
More informationIWAKI Magnet Gear Pump MDG-M4 (built-in type) Instruction Manual
IWAKI Magnet Gear Pump MDG-M4 (built-in type) Instruction Manual Read this manual before use of product This instruction manual includes descriptions of the correct handling of the pump, maintenance and
More informationIWAKI Magnet Gear Pump MDG-M4 Instruction Manual
IWAKI Magnet Gear Pump MDG-M4 Instruction Manual Read this manual before use of product This instruction manual includes descriptions of the correct handling of the pump, maintenance and inspection procedures
More informationIWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual. Read this manual before use of product
IWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual Read this manual before use of product Thank you for having purchased the Iwaki Bellows Pump Model: CFD-8T-B. This pump is designed
More informationIWAKI Gas-Liquid Transfer Pump APN-30/-60 GD3-W Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-30/-60 GD3-W Instruction Manual Read this manual before use of product Thank you for selecting an IWAKI APN-30/-60 GD3-W gasliquid transfer pump (BLDC motor). This instruction
More informationIWAKI Gas-Liquid Transfer Pump APN-05/-10/-20/-30/-60-W (built-in type) Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-05/-10/-20/-30/-60-W (built-in type) Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI APN series gas-liquid transfer pump.
More informationMDT Series Instruction Manual
IWAKI Magnetic Drive Turbine Pump MDT Series Instruction Manual Read this manual before use of product Thank you for having selected IWAKI s magnetic drive turbine pump MDT Series. This instruction manual
More informationIWAKI Gas-Liquid Transfer Pump APN-085-W Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-085-W Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI APN series gas-liquid transfer pump. This instruction manual deals with
More informationIwaki Photoresist Dispensing Pump PDS-105 RA/RB
Iwaki Photoresist Dispensing Pump PDS-105 RA/RB Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This instruction manual describes important
More informationIWAKI PNEUMATIC DRIVE BELLOWS PUMPS
IWAKI PNEUMATIC DRIVE BELLOWS PUMPS F For high purity chemical handling applications in semiconductor processing applications The F-Series includes pneumatic drive bellows pumps that are designed for use
More informationMain material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS SMX-F PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN
Main material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation The
More informationIWAKI Air Pump BAN-0510/-0505 Instruction Manual. Read this manual before use of product
IWAKI Air Pump BAN-0510/-0505 Instruction Manual Read this manual before use of product Thank you for selecting an IWAKI BAN-0510/-0505 air pump. This instruction manual deals with "Safety Instructions",
More informationIWAKI Hicera Pump V series Instruction Manual. Read this manual before use of product
IWAKI Hicera Pump V series Instruction Manual Read this manual before use of product Thank you for selecting an Iwaki V Series Hicera Pump. This instruction manual deals with "Safety instructions", "Outline",
More informationIWAKI Air Pump APN-085-D3 Instruction Manual. Read this manual before use of product
IWAKI Air Pump APN-085-D3 Instruction Manual Read this manual before use of product Thank you for selecting an IWAKI APN-085-D3 air pump. This instruction manual deals with "Safety Instructions", "Outline",
More informationIWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual. Read this manual before use of product
IWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual Read this manual before use of product Thank you for having purchased the Iwaki Bellows Pump Model: CFD-8T-B. This pump is designed
More informationIWAKI Electromagnetic Metering Pump ES-B/C Type Instruction Manual. Read this manual before use of product
IWAKI Electromagnetic Metering Pump ES-B/C Type Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI's electromagnetic metering pump ES series. This instruction manual
More informationIWAKI Magnetic Drive Pump MX-F100 Instruction Manual. Read this manual before use of product
IWAKI Magnetic Drive Pump MX-F100 Instruction Manual Read this manual before use of product Thank you for selecting an Iwaki MX-F type Magnetic Drive Pump. This instruction manual deals with "Safety Instructions",
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationIWAKI Metering Pump LK-A, B, C Models Instruction Manual
IWAKI Metering Pump LK-A, B, C Models Instruction Manual Read this manual before use of product Thank you for selecting IWAKI s diaphragm pump LK. This pump is a diaphragm type metering pump of which the
More informationMagnetic drive pumps MX series
CATE 62 Magnetic drive pups MX series Withstands difficult operating conditions and offers high efficiency The MX Series represents the latest state of the art design in plastic agnetic drive pups. With
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationStainless Steel Centrifugal Pump SJ4S. 50Hz
Stainless Steel Centrifugal Pump SJ4S Hz Non-Submersible Pump Centrifugal Pumps Applications General water supply Industrial water Hot and cold water circulation Water supply for industrial use Distribution
More informationStainless Steel Centrifugal Pump SJ4S. 60Hz
Stainless Steel Centrifugal Pump SJS 60Hz Non-Submersible Pump Centrifugal Pumps Applications General water supply Industrial water Hot and cold water circulation Water supply for industrial use Distribution
More informationIWAKI MAGNETIC DRIVE PUMPS MDW. Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN Max. flow capacity of 300 3 /hr and ax. discharge head of 98. The world s largest class fluoroplastic agnetic drive pup. The series
More informationKnife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More informationIwaki Direct Drive Pump RD-40
Iwaki Direct Drive Pump RD-40 Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This instruction manual describes important precautions and
More informationHOW TO SEND E-INVOICES TO CARGOTEC
HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving
More informationYou ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
More informationGuide Ball Bushing NEW
NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available
More informationIWAKI Metering Pump LK-F Series Instruction Manual
IWAKI Metering Pump LK-F Series Instruction Manual Read this manual before use of product Thank you for selecting the Iwaki Mechanical-driven Diaphragm Type Metering Pump model LK-F. This instruction manual
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationIwaki Direct Drive Pump RD Series
Iwaki Direct Drive Pump RD Series Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This instruction manual describes important precautions
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationCAT.ES70-22 A. Series VC. Direct Operated 2 Port Solenoid Valve for Heated Water. Series VCB
CAT.ES0- A Series VC Direct Operated Port Solenoid Valve for Heated Water Series VCB Multipurpose Valve for Heated Water Direct Operated Port Solenoid Valve for Heated Water Series VCB Improved durability
More informationGrundfos Home Booster
GRUNDFOS DATA BOOKLET Grundfos Home Booster UPA 15-9, UPA 15-12, UPA 15-16, UPA 12 5/6 Hz Grundfos Home Booster Table of contents 1. Product description 3 Applications..................................................................................
More informationProcess Equipment. Pumping Solutions for Process Industries
Process Equipment Pumping Solutions for Process Industries Ordering Husky Air-Operated Information Double Diaphragm Pumps Husky Pumping Technology Our Husky air-operated double diaphragm pumps are loaded
More informationSeries PMB-D PRC-A PMB-C
Low Vacuum Pump Mechanical Booster Pump PMB / PRC Series By using mechanical booster pumps together with backing pumps such as dry vacuum pumps and oil rotary pumps, it is possible to increase pumping
More informationKnife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
More informationVolute pumps. SJ-e. 50Hz
Volute pumps SJ-e 50Hz Volute pumps Cast-iron 2-Pole, direct driven type SJ-e Applications General water supply in buildings and apartments, etc Hot and cold water circulation Supply of industrial water
More informationSelection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
More informationIWAKI METERING PUMPS AX
IWAKI METERING PUMPS The highest reliability system metering Iwaki metering pumps series are compact hydraulic diaphragm pumps designed to meet the exacting requirements of modern advanced chemical processes.
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationSFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability
SFC-FID ASTM System SFC-4000 Series SFC Performance Innovation Reliability The JASCO SFC-FID system has been developed as a simple and validated turn-key solution for the measurement of the two ASTM standard
More informationThermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
More informationHELICOPTERS Service. Helicopter Maintenance Upgrades
HELICOPTERS Service Helicopter Maintenance Upgrades MISSION SUCCESS WITH AIRBUS HELICOPTERS UPGRADES Airbus Helicopters Customer Centers are at your service: providing local, on-the-spot solutions Airbus
More informationMTC. Mold Temperature Control. Consilience Technology
We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company
More informationWorld Air Conditioner Demand by Region
World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning Industry Association 1 World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning
More informationMerkur. High Performance Fine Finish Packages
High Performance Fine Finish Packages Advanced Technology. Superior Performance. The new and improved packages are designed to outperform and outlast other pumps in their class. With more models and configurations
More informationProcess Equipment. Pumping Solutions for Process Industries
Process Equipment Pumping Solutions for Process Industries Ordering Husky Air-Operated Information Double Diaphragm Pumps Husky Pumping Technology Our Husky air-operated double diaphragm pumps are loaded
More informationAir-Operated Double-Diaphragm. High Purity PTFE Pumps
Air-Operated Double-Diaphragm High Purity PTFE Pumps ULTRA High-Purity Series Ultra-High Purity Series was designed specifically for the Semiconductor Yamada s advantages come from years process of experience
More informationStafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
More informationAir Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps 2016 Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationMICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
More informationSlipring Columns. Manufactured by Cavotec Alfo
Slipring Columns Manufactured by Cavotec Alfo Slipring Columns Who we are Cavotec is a multi-national group of companies serving the following industries: mining and tunnelling, ports and maritime, steel
More informationPFA Lined Ball Valve:Model PF2 PFA. Lined Check Valve: Model PSC20. CATALOGUE No.ZP05 NIPPON VALQUA INDUSTRIES, LTD. NIPPON VALQUA INDUSTRIES, LTD.
Revised April 2017 CATALOGUE No.ZP05 PFA Lined Check Valve: Model PSC20 Spring Type "VALQUA" is a compounded word coming from VALUE and QUALITY which is the symbol and motto of the company. The above trade
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
More informationType Number Symbol Value Units
Features: Zener voltage range.0 to 7 volts. Mini-MELF package. Surface device type mounting. Hermetically sealed glass. Compression Bonded Construction. All external surfaces are corrosion resistant and
More informationMotor pumps. SJM2-e/SJM3-e. 50Hz
Motor pumps SJM-e/SJM3-e 50Hz Volute pumps -pole motor type SJM-e/SJM3-e pplications General water supply for buildings, condominiums, etc. Circulation of cold/warm water Conveyance of industrial water
More information9 Sales offices, 26 after sale service centres, 11 manufacturing plants for EUROPONT travelling cranes and a national distribution network.
VERLINDE is: The leading French constructor and exporter of hoisting and mechanical handling equipment. A group employing 9 500 staff. A large range hoisting equipment from 60 to 80.000 kg ISO 9001 quality
More informationMETAL SEATED NELDISC BUTTERFLY VALVES, SERIES L12
METAL SEATED NELDISC BUTTERFLY ALES, SERIES L12 2 L12 20 Issue 4/99 SIZES AND PRESSURE RATINGS Size range DN 80-600, 3" - 24". Pressure ratings PN 10, 16, 25 and ANSI 150. FEATURES Third-generation, metal-to-metal
More informationProcess Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated Pumps for Process Industries Superior Pumping Technology 55 Gallon Drum Transfer and Supply Pump from your 55 gallon drums with our double diaphragm or piston evacuation
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationWANNER ENGINEERING INC
Industrial Pumps WANNER ENGINEERING INC Durability, performance and simplicity of design make Hydra-Cell pumps the optimum choice for the widest range of pump applications. When we say Simply Built to
More informationManual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use
Manual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use Proven Quality. Leading Technology. Exceptional Spray Quality Maximize efficiency and quality, while reducing operator
More informationFG Series, 230V ac Toroidal Single Primary Transformers
A high quality range of open style toroidal transformers with flying leads. Featuring a single primary winding rated at 230V 50/60Hz, and dual secondary windings. Secondary windings can be connected in
More informationMULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS
MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS 2 ACCURATE DYNAMIC EFFICIENT Altitude simulation for R&D The topic of Real Driving Emissions (RDE) is becoming more and more impor tant. Accurate
More informationMXM. Magnetic drive pumps Magnetic drive pumps with an excellent balance of features and performance. s e r i e s
MXM s e r i e s Magnetic drive pumps Magnetic drive pumps with an excellent balance of features and performance The MXM series of pumps have now been added to the line-up of Iwaki s magnetic drive process
More informationAir Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Fully Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationIWAKI Pneumatic Drive Bellows Pump FA Instruction Manual
IWAKI Pneumatic Drive Bellows Pump FA Instruction Manual Read this manual before use of product Thank you for selecting an Iwaki Pneumatic Drive Bellows Pump the FA. This instruction manual deals with
More informationDIAPHRAGM LIQUID PUMPS
DIAPHRAGM LIQUID PUMPS NF 600, NF 1.600 NF 600 KPDCB NF 1.600 KPDC Concept KNF diaphragm liquid pumps are based on the principle of the oscillating displacement pump which is remarkably simple in design.
More informationMulti Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
More informationVACUUM CONVEYOR SYSTEM
ISO 9001 CERTIFIED 0575 Ⅱ 1Dc 90 C / Ⅱ 2 GD c 100 C VACUUM CONVEYOR SYSTEM Why!! We are VMECA Vacuum conveyor system? Minimal Maintenance Low Noise Level Automatic Filter Cleaning System Simple to Installation
More informationFLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
More informationESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
More informationMade UNDER high pressure
Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.
More information4 3 FSPA. End Suction Pumps *) Horizontal Split Case Pumps **) FEATURES
FEATURES. Non Overload design to ensure stable performance for all applications 2. Corrosion resistant materials used on the rotating parts 3. Hydraulically balanced impeller extends bearing life and assures
More informationSingle-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
More informationTriton. High quality fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY.
Triton High quality fine finish spray packages for wood and metal applications PROVEN QUALITY. LEADING TECHNOLOGY. Finally... a spray package specifically designed for the TRITON is an air-operated diaphragm
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationSTEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
More informationSTEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
More informationGlass Sanding Solution
Glass Sanding Solution About Mirka Mirka s Glass Sanding Solution KWH MIRKA LTD is a family-owned Finnish company and a world leader in abrasives technology innovation. We are offering a complete range
More information