GEZE ELECTRICALLY OPERATED CHAIN DRIVES
|
|
- Paulina Cain
- 5 years ago
- Views:
Transcription
1
2 GEZE RW exhaust systems GEZE ELECTRICLLY OPERTED CHIN DRIVES ccessories for GEZE electrically operated chain drives E820 GEZE drive fitting type for installation on frames and casements of bottom, top and side windows that open inwards and outwards GEZE RW Drive fitting type E 820/E 840 GEZE bracket type combined with drive fitting type for installation on frames and casements of bottom, top and side windows that open inwards and outwards Bracket type E 820/E 840 GEZE drive fitting type B for installation on the frame of bottom windows that open inwards Drive fitting type B E 820/E 840 GEZE bracket type B combined with drive fitting type B for frame installation on bottom windows that open inwards without drive fitting for frame installation on bottom and top windows that open inwards as well as on side windows that open outwards Bracket type B E 820/E 840 GEZE RW systems 29
3 GEZE RW exhaust systems GEZE ELECTRICLLY OPERTED CHIN DRIVES Dimensional drawing RW chain drive E820 GEZE RW Stroke L LM 200 mm 335 mm 325 mm 12 5 L mm 380 mm 370 mm 400 mm 430 mm 420 mm 500 mm 545 mm 535 mm 600 mm 545 mm 535 mm 41 LM General installation possibilities window windows Side windows Vertically pivoted casement window Horizontally pivot window General application data Individual operation Synchronous operation Max. casement area 1.5 m 2 3 m 2 Stroke 200 mm 394 mm 1800 mm Stroke 300 mm 484 mm 1900 mm Min. casement width (a) Stroke 400 mm 584 mm 1000 mm Stroke 500 mm 814 mm 1220 mm Stroke 600 mm 814 mm 1220 mm Max. casement width (a) 1200 mm 2400 mm Projection height 0-21 mm 0-21 mm Max. casement weight See the respective application for the calculation equation Min. casement height (b) depending on the type of installation and bracket With larger casement areas, an additional locking bracket is required (can only be used for bottom casements that are opened inwards) Smaller casement widths are possible, the drives then project beyond the edge of the casement Fitting variations (EW) OUTWRD- OPENING (W) (EW) Frame installation (RM) Casement installation (FM) Frame installation (RM) Frame installation (RM) Casement installation (FM) 30 GEZE RW ND VENTILTION TECHNOLOGY
4 GEZE RW exhaust systems GEZE ELECTRICLLY OPERTED CHIN DRIVES Combination of brackets/type of installation Bracket for bottom window bottom window OUTWRD-OPENING bottom window Casement Installation window window OUTWRD-OPENING window Casement Installation Side window Side window OUTWRD-OPENING Side window Casement Installation Drive fitting type type type type type type type Drive fitting type B type B without drive fitting type B type B type B GEZE RW Where there are several alternatives available, selection depends on the window size, structural circumstances and chain stroke chosen. = yes = no RW chain drive E820 on bottom and top windows that open inwards and outwards Calculation of the area of application depending on casement weight and casement dimensions Permissible wind loads must be taken into consideration! Equation for calculating opening and closing force: F = p x stroke x 0.54 b Example for E820 in individual operation: P = 25 kg = approx. 250 N Stroke = 400 mm b = 1000 mm F = 250 x 400 x F max. = 250 N per drive F = 54 N Key F Opening and closing force required (N) P Casement weight (kg) Stroke Casement path/drive stroke (mm) b Casement height (mm) windows window Stroke F Example for two drives E820 Syncro: P = 95 kg = approx. 950 N Stroke = 400 mm b = 800 mm F = 950 x 400 x F = 257 N b F P Stroke P b Casement panel weight: max. 30 kg/m 2 (drive cannot be swivelled) max. 40 kg/m 2 (drive can be swivelled) Max. pushing and pulling force depends on the drive stroke (see force-path diagram). This must be considered in the calculation Force-path diagram Force F (N) Stroke (mm) Pull Pressure (shaded area) GEZE RW systems 31
5 GEZE RW exhaust systems GEZE ELECTRICLLY OPERTED CHIN DRIVES RW electrically operated chain drive E820 minimum casement heights GEZE RW Depending on the type of installation and the drive fittings and brackets to be used, the following minimum casement heights can be achieved (depending on the projection (Ü)) Stroke (mm) EW RM /side EW RM Side W RM /side x = 16 mm /side x = 21 mm EW RM W RM W RM D C B C B B Ü (mm) = yes = no Minimum casement heights are applicable for bottom, top and side windows. On horizontally and vertically pivot windows, FH corresponds to the distance from the main closing edge to the hinge axis. For the assignment of, B, C and D see the following fitting dimensions. L Centre of window LC 28 0 LB Centre of window Fitting dimensions drive fitting type with bracket type Fitting dimensions drive fitting type with bracket type B Bracket type Space required for frame Bracket type Space required for casement x-7 Drive fitting x x 39 Space required for casement: 39 - x Drive fitting Space required for frame Drive standard installation Example: Casement installation on bottom window that opens inwards Drive turned Example: Frame installation on top window that opens outwards 32 GEZE RW ND VENTILTION TECHNOLOGY
6 GEZE RW exhaust systems GEZE ELECTRICLLY OPERTED CHIN DRIVES Fitting dimensions without drive fitting with bracket type B Fitting dimensions drive fitting type B with bracket type B min. C D = space required for swivelling the drive min. 8 GEZE RW max. 32 min. 8 max min L 125 L LC 140 LC Drive directly on the frame Example: Frame installation on bottom window that opens inwards Drive can be swivelled Example: Frame installation on bottom window that opens inwards Lengths depend on drive stroke Stroke L LB LC 200 mm 170 mm 174 mm 185 mm 349 mm 300 mm 215 mm 219 mm 230 mm 394 mm 400 mm 5 mm 9 mm 280 mm 444 mm 500 mm 380 mm 384 mm 395 mm 559 mm 600 mm 380 mm 384 mm 395 mm 559 mm 1/2 casement width a 1/2 casement width a 0 LB 0 LB GEZE RW systems 33
GEZE ELECTRICALLY OPERATED CHAIN DRIVES
exhaust systems ORDER INFORMATION GEZE ELECTRICALLY OPERATED CHAIN DRIVE E860 / 24 V DC Description Version Id. No. Id. No. Synchro set Stroke 250 mm EV1 129685 129687 to RAL 129686 129688 Stroke 400 mm
More informationGEZE rwa and ventilation technology BEWEGUNG MIT SYSTEM
rwa and ventilation technology convenient and safe opening electrically operated BEWEGUNG MIT SYSTEM Table of Contents Foreword electrically operated ventilation 4 Chapter 1 Chain drives 1.1 1.1.1 chain
More informationContents. Sliding Door Gear Product information 155. Roller-Guided Sliding Door Gear. Page
GEZE APOLL Contents Page Sliding Door Gear Product information 155 Roller-Guided Sliding Door Gear APOLL/Sliding doors 1-55 APOLL/Components 6-17 APOLL/End-folding doors 18-25 APOLL/Centre-folding doors
More informationGEZE INSTALLATION OPTIONS
GEZE TS 3000 V Buffer - up to 750 2.5 revolutions 750-850 5 revolutions 850-950 Buffer + 950-1100 1 Door closer size 2 Closing speed 3 Latching action 4 Back check (only with TS 3000 VBC) Light-running
More informationGEZE PERKEO AND LINEAR GUIDES
CONTENTS GEZE PERKEO door systems PERKEO 75 sizes 1, 2, 3 4 Standard installation 5 PERKEO 75 sizes 1, 2, 3 Ordering information 6 PERKEO 75 Type 14/ Type 14a 7 PERKEO sizes 1, 2, 4 8 Standard installation
More informationGEZE DOOR TECHNOLOGY GEZE PERKEO AND LINEAR GUIDES THE BALL BEARING SLIDING DOOR SYSTEM FOR EXTREMELY DURABLE, PRECISE GUIDES BEWEGUNG MIT SYSTEM
GEZE DOOR TECHNOLOGY THE BALL BEARING SLIDING DOOR SYSTEM FOR EXTREMELY DURABLE, PRECISE GUIDES BEWEGUNG MIT SYSTEM CONTENTS GEZE PERKEO door systems PERKEO 75 sizes 1, 2, 3 4 Standard installation 5
More informationSelection BASIC LINE BASIC LINEPLUS
PLUS 108 0115 Extremely quick cable laying thanks to flexible lamella crossbars 0115 PLUS Very fast cable laying by simply pressing in Very high utilization factor due to flexible crossbars swivelling
More informationTECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
More informationNEV ABLE REDUCER CORONET REDUCER FOR SERVO MOTOR
NEV 83 Right Angle Shaft Model & Type Symbol 85 Performance Table Right Angle Shaft Reduction ratio 1/3 1/5 1/9 1/15 1/27 1/45 1/75 1/105 Type Output shaft speed Rated Max. instantaneous output torque
More informationGEZE WINDOW TECHNOLOGY, NATURAL VENTILATION AND SHEV GEZE OL LINE MANUAL WINDOW CONTROLS FLEXIBLE MODULAR SYSTEMS BEWEGUNG MIT SYSTEM
GEZE WINDOW TECHNOLOGY, NATURAL VENTILATION AND SHEV FLEXIBLE MODULAR SYSTEMS BEWEGUNG MIT SYSTEM Cover photo and photo on page 2: GEZE GmbH TABLE OF CONTENTS GEZE OL Line Manual Window Control Systems
More informationaluminium PRODUCT RANGE OVERVIEW QUALITY SOUTH AFRICAN MANUFACTURERS OF www.origingroup.co.za Open up your world ORIGIN PATIO DOOR SIDELIGHTS CONFIGURATION 0 = fixed X = sliding OX OXX OXXO Optional: Fly
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 250 Extremely robust and stable steel chains* PLUS Extremely robust and stable steel chains for heavy mechanical loads and harsh environmental conditions Very long unsupported lengths also for large
More informationSpindle drives. Spindle Drives SP
Spindle Drives SP Special Features sp For natural ventilation, smoke and heat exhausting systems Robust corrosion-resistant design Aluminium housing anodized finish with plastic end caps Easy installation
More informationMODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)
DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
More informationGEZE TS 3000 V / SYSTEM TS 5000
GEZE TS 5000 ISM Guide rail door closer system for double-leaf doors up to 2800 mm hinge clearance with integrated closing sequence control The integrated closing sequence control ensures the correct closing
More informationContent. Door closer. Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82
Content Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82 Slide rail door closer for single-sash doors 83 Slide rail door closer
More informationE2/000 Series
E2/000 Series 35 35 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationLM-P608 Portal Axis. Features. Versions
The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications
More informationFuma. Automatic Opening Vent. Installation instructions
Fuma Automatic Opening Vent Installation instructions Thank you for choosing Fuma To ensure the installation process is simple and efficient we recommended you read this guide in full before you begin.
More informationOverview. Trailing arm 100 mm wide. Single leaf 1x57. Single leaf 1x57
Overview Sheet I Air suspension axles and suspensions Axle load Trailing arm 100 mm wide Air bag Axle type with disc brake TSB 4312 Ride height FH (mm) to drawing Single leaf 1x57 415-560 Sheet 1a Air
More information09/2011 HAUTAU PRIMAT. for timber, PVC, and aluminium elements
Catalogue 09/2011 HAUTAU PRIMAT for timber, PVC, and aluminium elements HAUTAU Catalogue Fanlight openers HAUTAU PRIMAT 09/2011 HAUTAU GmbH P.O. Box 1151 D 31689 Helpsen Phone +49 05724/393-0 Fax +49
More informationHSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Medium-to-low Vacuum Type Model LM block: THK-EX50 (martensitic stainless steel) End plate: SUS304 Labyrinth end seal dedicated for Medium-to-Low Vacuum: SUS304 Upper plate: SUS316L LM rail: THK-EX50
More informationAxial Piston Variable Double Pump A8VO
Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code
More informationCE conform applications according to EN External door with thermal break System Forster unico
CE conform applications according to EN 14351-1 External door with thermal break System Forster unico 2 Properties Table 1 Doors, opening outwards Change of dimension Resistance to wind load Air permeability
More informationMondrian CWS-50 Slim Product Information Sheet
Glass 6mm toughened outer / 16mm argon filled cavity / 6mm toughened inner with low e coating Available on request Low Iron Glass, Low Maintenance Coatings, Solar Control Coatings, IQ Heated Glass, Privacy
More informationGEZE TS 3000 V / SYSTEM TS 5000
GEZE TS 000 Guide rail door closer for single-leaf doors with up to 1400 mm leaf width The TS 000 overhead door closer stands for clear, clean lines and diverse system variations. It is for single-leaf
More informationGEZE INSTALLATION OPTIONS
RECOMMENDED SETTINGS FOR GEZE DOOR CLOSERS Remove slide plate Clip slide plate open Set 1 2 PH2 2 1 90 GEZE TS 5000 1 Door closer size 2 Closing speed 3 Latching action 4 Back check 5 Delayed closing action
More informationLM Guide Structural Member Rail Four-way Equal Load Type
LM Guide Structural Member Rail Four-way Equal Load Type JR CATALOG No.137-5E Structural Member Rail, Four-way Equal Load Type LM Guide JR Upper plate LM rail LM block Endplate End seal Grease nipple Side
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationKP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER
KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER Robust all-rounder with variable inner distribution 2 height mm widths 50 mm Pitch 35 mm Additional load up to 2 kg/m Travel
More informationLinear Actuator with Ball Screw and Extending Rod Series OSP-E..SBR. Contents Description Overview Technical Data Dimensions 110
Linear Actuator with Ball Screw and xtending Rod Series OSP-..SBR Contents Description Page Overview 103-106 Technical Data 107-109 Dimensions 110 103 The System Concept LCTRIC LINAR ACTUATOR FOR PRCIS
More informationTECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS
TECHNOLOGY IN MOTION TU.-ON. AND T&T FITTINGS Installation instructions TIMBER WINDOWS System designation: TO > Single routing DT > Double routing AS > Face fix fittings Note about surfaces fittings are
More informationPneumatic & Hydraulic SYSTEMS
Pneumatic & Hydraulic SYSTEMS CHAPTER EIGHT HYDRAULIC PUMPS AND ACTUATORS Dr. Ibrahim Naimi The higher the discharge pressure, the lower the volumetric efficiency because internal leakage
More informationArte. Possibilities. Architecture for the future. Endless. Standard Profiles Nunc Et Orci Morbi Posuere. Arte Profiles Options. Arte Window Options
Possibilities Arte Endless Architecture for the future Standard Profiles Nunc Et Orci Morbi Posuere Arte Profiles Options Page 4 Arte Window Options Arte Door Options Page 13 Page 25 Table of Contents...
More informationigus TwisterChain NEW Second Generation: robust, low-noise, for high loads
igus TwisterChain NEW Second Generation: robust, low-noise, for high loads TwisterChain New robust, low-noise, for high loads Higher loads and smoother running igus new generation of TwisterChain circular
More information...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
More informationSPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP
SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP VARIABLE SPRING ELEMENTS CONTENTS PAGE 0 Spring hangers, spring supports, sway braces.1 Load table for spring hangers, spring supports and other spring elements.3
More informationQUICKTRAX Specifications are subject to change without notice. KSA-0810-GC
24 24.02 A member of the TSUBAKI GROUP light weight cost-effective standard widths QuickTrax Compact and cost-effective cable carriers in two-component technology Extremely fast and easy cable laying installation
More informationModern. Security. Doric s range of Door Closers are compact. & Clean design
Security Doric s range of Door Closers are compact with a tidy design, making them easy to install and ideal for a concealed and efficient appearance. Modern & Clean design 244 www.doric.com.au HYDRAULIC,
More informationHSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA
Cost effective Type (Ct Grade) of L Guide Debuts A cost effective series of the well-established model HSR has been newly added. Optimal for the general linear guide market such as for conveyance systems!
More informationUnit P.3, P3.2. Using physics to make things work. 1. (a) Every object has a centre of mass. What is meant by the centre of mass?
Using physics to make things work 1. Every object has a centre of mass. What is meant by the centre of mass? The drawing shows a thin sheet of plastic. The sheet is 250 mm wide. Two holes, each with a
More informationTECHNOLOGY IN MOTION MACO MULTI-MATIC TILT AND TURN FITTINGS. Installation instructions PVC WINDOWS
TECHNOLOGY IN MOTION TILT AND TURN FITTINGS Installation instructions PVC WINDOWS Note on the surfacefinish fittings are electrogalvanised, passivated and sealed with wax. We guarantee that the surfacefinish
More informationManual & Electric. Window Control Systems. More than just Suppliers of Hardware & Accessories for Windows & Doors
Manual & Electric Window Control Systems More than just Suppliers of Hardware & Accessories for Windows & Doors Remote Controlled Window Systems COMPANY PROFILE & INTRODUCTION Developments in the window
More informationSPEED CONTROL OF DC SHUNT MOTOR
INDEX NO. : M-140 TECHNICAL MANUAL FOR SPEED CONTROL OF DC SHUNT MOTOR Manufactured by : PREMIER TRADING CORPORATION (An ISO 9001:2000 Certified Company) 212/1, Mansarover Civil Lines, MEERUT. Phone :
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationTHE IDEAL SOLUTION FOR DOORS UP TO 1100MM WIDE TESTED AND APPROVED TO EN 1154
Door closer THE IDEAL SOLUTION FOR DOORS UP TO 1100MM WIDE TESTED AND APPROVED TO EN 1154 The is the ideal multi-purpose door closer for all standard door designs and constructions. Without a backplate,
More information02)-D-EU-TWISTER-KOMPLETT- G :04 Uhr Seite
2.56 New generation: robust, low-noise, for high loads twisterchain new 2.57 NEW in this catalog New generation - twisterchain new: robust, low-noise, for high loads Higher loads and smoother running igus
More informationPROTECTION AND CONTROL
B C Table 1 DIMENSIONAL Information for Trans-Guard OS Fuses Fuse Voltage Rating (kv) 1/4-20 threaded hole 1/2 deep (both ends) Current Rating (Amps) Fuse Catalog Number 35 HTDS232035 Overall Diameter
More informationDESIGN DATA - CURVED SHAPES Wood and Aluminum-Clad Exteriors
DESIGN DT - CURVED SHPES Wood and luminum-clad Exteriors Curved Shapes - Frame cannot exceed 96" in both directions. For units with colored glazing (bronze, gray or green), frame cannot exceed 11' 0-3/4"
More informationDOWALDWERKE HYDRAULIC CYLINDERS. What we can do for you. Our cylinders are available in many, many versions: We bring movement to the market.
DOWALDWERKE HYDRAULIC CYLINDERS What we can do for you We develop, design and manufacture hydraulic cylinders with piston diameters up to approximately 125 mm and strokes of up to about 1200 mm. We handle
More informationPositioning Systems Linear Motor Systems
www.hiwin.de Positioning Systems Linear Motor Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved.
More informationManipulators. Example 1: The Claw
Manipulators With these examples we will demonstrate some basic designs to accomplish each of the game piece challenges involved in the 2018 FIRST Global game Energy Impact to: 1. Collect fuel cubes and
More informationCYCLICALLY OPERATING VALVES FOR MACHINES OR ENGINES (valves in general F16K)
F01L CYCLICALLY OPERATING VALVES FOR MACHINES OR ENGINES (valves in general F16K) Valve-gear or valve arrangements, e.g. lift-valve gear; Lift-valve, i.e. cut-off apparatus with closure members having
More informationET 332b Ac Motors, Generators and Power Systems. lesson14_et332b.pptx. Learning Objectives. After this presentation you will be able to:
ET 332b Ac Motors, Generators and Power Systems lesson14_et332b.pptx 1 Learning Objectives After this presentation you will be able to: List the characteristics of NEMA Design motors. Identify and interpret
More informationCONTENT 4 TRACKS. 19 TLP 80 THERMO panels / tracks 20 PANELS 29 WINDOWS 31 WICKET DOOR 34 THRESHOLD TYPES 37 SIDE-HINGED DOORS 43 OPERATORS
Industrial doors CONTENT 4 TRACKS 5...STD 6...LHR-FM 7...LHR-RM 8...STD-RM 9...HL-TM 10...VL-TM 11...HL-MM1 with lower torsion spring shaft 12...HL-MM2 with lower torsion spring shaft 13...VL-MM1 with
More informationVERSION 1 / Basic cylinder R Through rod. VERSION 2 D Double acting Y Single acting rear spring* S Single acting front spring
Stainless steel round cylinders with techno-polymer end caps (to ISO 6432 standard for Ø 6 25) DESCRIPTION Cylinders series UP are born as technological efficient reply to the always new needs of different
More informationATMOS Chair E 2. Included in delivery: Power Cord, operating instructions
ATMOS Ptient Chir E 2 - Mobile yet stedy like rock. Ergonomic seting nd tretment comfort Infinitely vrible inclintion djustment Robust nd solid technology Esy hndling ATMOS Chir E 2 REF Electromotive height
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More information12/25/2015. Chapter 20. Cams. Mohammad Suliman Abuhiba, Ph.D., PE
Chapter 20 Cams 1 2 Introduction A cam: a rotating machine element which gives reciprocating or oscillating motion to another element (follower) Cam & follower have a line constitute a higher pair. of
More informationKINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A
KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A 1. Define the term Kinematic link. 2. Classify kinematic links. 3. What is Mechanism? 4. Define the terms Kinematic pair.
More informationProduct design: Mechanical systems
Product design: Mechanical systems Recall Mechanisms can: change direction of movement, e.g. from clockwise to anticlockwise or from horizontal to vertical; change type of movement, e.g. from rotating
More informationFor further assistance, call
RESTRICTORS - VARIOUS Inside: - Casement/Tilt & Turn Restrictor Catch - Door Restrictor - VS Rola Travel Restrictor - VS Sharks Fin Travel Restrictor - Door Safe T Bar Restrictors - January 2018 CASEMENT
More informationLinear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides
PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range
More informationThat s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More information47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (
Boom Truck Crane TRUCK CRANE FEATURES 47,000 Ib (21 319 kg) maximum lifting capacity 101 (30.78 m) maximum sheave height 144 (43.89 m) maximum sheave height with 26-44 (7.92-13.41 m) jib 29-92 (8.84-28.04
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationFLAIR FRAMELESS CLEAN EASY RISING BUTT HINGE MECHANISM FOR SMOOTH MOVEMENT. HEIGHT 1950mm 6GLASS THICKNESS MAGNETIC CLOSURE
FLEXIBILITY IS KEY TO THE FLAIR CONCEPT. THIS CLEVERLY DESIGNED RANGE IS BOTH WETROOM AND APPLICATION 1950 MAGNETIC CLOSURE RISING BUTT HINGE MECHANISM FOR SMOOTH MOVEMENT CLEAN EASY COATING REVERSIBLE
More informationModule 2 : Dynamics of Rotating Bodies; Unbalance Effects and Balancing of Inertia Forces
Module 2 : Dynamics of Rotating Bodies; Unbalance Effects and Balancing of Inertia Forces Lecture 3 : Concept of unbalance; effect of unbalance Objectives In this lecture you will learn the following Unbalance
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
More informationPositioning Systems Linear Motor Systems
www.hiwin.de Positioning Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved. Complete or partial
More informationGEZE DOOR TECHNOLOGY AND GLASS SYSTEMS GEZE TS 3000 V / SYSTEM TS 5000 OVERHEAD DOOR CLOSERS WITH GUIDE RAIL BEWEGUNG MIT SYSTEM
GEZE DOOR TECHNOLOGY AND GLASS SYSTEMS OVERHEAD DOOR CLOSERS WITH GUIDE RAIL BEWEGUNG MIT SYSTEM Cover photo: Dirk Wilhelmy, photo on page 2: Siegelwerk GmbH TABLE OF CONTENTS Overview table 4 Application
More informationLOAD CHART MANUAL FOR RT55 ROUGH TERRAIN CRANE
Address:Quantang Indust=rial Park, 2nd Yuanda Road, Changsha Economic and Technological Development Zone, Hunan Province, China Postcode: 410131 Website: www.zoomlion.com LOAD CHART MANUAL FOR RT55 ROUGH
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationLOAD CHART MANUAL FOR RT60 ROUGH TERRAIN CRANE
LOAD CHART MANUAL FOR RT60 ROUGH TERRAIN CRANE Address:Quantang Indust=rial Park, 2nd Yuanda Road, Changsha Economic and Technological Development Zone, Hunan Province, China Postcode: 410131 Website:
More informationGEZE WINDOW TECHNOLOGY, NATURAL VENTILATION AND RWA OVERVIEW OF GEZE WINDOW TECHNOLOGY NATURAL VENTILATION AND RWA BEWEGUNG MIT SYSTEM
GEZE WINDOW TECHNOLOGY, NATURAL VENTILATION AND RWA OVERVIEW OF GEZE WINDOW TECHNOLOGY NATURAL VENTILATION AND RWA BEWEGUNG MIT SYSTEM Cover photo and photo on page 2: Lazaros Filoglou GEZE RWA AND VENTILATION
More informationG E Z E D O O R T E C H N O LO G Y INTEGRATED DOOR CLOSERS GEZE BOXER RANGE B E W E G U N G M I T S Y S T E M
G E Z E D O O R T E C H N O LO G Y MOVEMENT AS IF BY MAGIC INTEGRATED DOOR CLOSERS RANGE B E W E G U N G M I T S Y S T E M CONTENTS door closer for single-leaf doors with a leaf width of up to 1400 mm
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationFolding Sliding System SF55c
Profile system Glass folding door with thermally insulated aluminum profiles Bottom-loaded construction The construction depth of the profiles is 75 mm Rear-ventilated wooden cladding inside Option of
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 182 Cable carrier with large inside PLUS Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97 Stable end connector made of steel Can be quickly opened on the
More informationSHE linear drives 24 V. C SHE chain motors 24 V. Control centres. G Services. H General information. Price list. Pre-printed order fax
A Company profile and customer service B SHE linear drives 24 V C SHE chain motors 24 V D Linear drives 230 V and chain motors 230 V for ventilation E Control centres F Accessories for control centres
More informationWhy do cars need Alignment
Why do cars need Alignment The main purpose of wheel alignment is to make the tires roll without Scuffing, slipping, or dragging under all operating conditions. Caster Camber Toe Steering axis inclination
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationLED Corn Bulb. Output: Peak: lm 1120 cd 82.1 W Power: PF: CL-40K80-E Lumen/Watt CRI: K CL-40K80-E39 CL-40K80-E39
Light efficiency: 132 Lumen/Watt Light quality: CRI:.0 Color temperature: 4106 K Output: Peak: Power: PF: 109 lm 1120 cd 82.1 W 0.99 150 165 1 165 150 Tracking number: n/a 135 120 105 135 120 105 Product
More informationFerroFinestra W20. Elegant and Timeless - the bedrock of steel windows
STEEL WINDOW CO. FerroFinestra W20 Steel FerroFinestra W20 Elegant and Timeless - the bedrock of steel windows This series has its origins in the Universal Range, which was introduced for the first time
More informationuser leaflet ANALOGUE BLOCK GAUGE
user leaflet ANALOGUE BLOCK GAUGE 1.0 Index Section Title Page 1.0 Index....................... 2 2.0 Safety Summary............... 3 3.0 Introduction.................. 4 4.0 Components of the Block Gauge...
More informationSöll GlideLoc Aluminium Ladders
Söll GlideLoc Aluminium Ladders Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 7 Söll GlideLoc Aluminium ladders Y-spar Profile 52 x 51 mm With connector Mounting
More informationLinear Axes Technical Data Summary
components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468
More informationE2/
1400 E2/000 1400 21 21 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationE2 e-tubes. Protection against dirt and debris 6.0
E2 e-tubes Protection against dirt and debris 6.0 6.1 E2 e-tubes - protection in environments with dirt and debris E2 Series R100 and Series R Since igus introduced the first openable e-tubes in the mid-1980`s,
More informationPiston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston
More informationConveyor system FS F45 F65 F85 FLX FMX FHX ACC PAL IDX FB140 FB175 FB295 FS - TOOL SPIRAL FBX175 FBX295
Conveyor system F45 FT FL F65 FM F85 FH FB140 FB175 FB295 SPIRAL FW FLX FMX FHX FBX175 FBX295 ACC Contents Chains 3 Conveyor beam 5 End drive units 7 Idler units 10 Horizontal wheel bends 12 Horizontal
More informationIII B.Tech I Semester Supplementary Examinations, May/June
Set No. 1 III B.Tech I Semester Supplementary Examinations, May/June - 2015 1 a) Derive the expression for Gyroscopic Couple? b) A disc with radius of gyration of 60mm and a mass of 4kg is mounted centrally
More informationLinear Torque Limiting Clutch
LM Series Features & Options Linear Torque Limiting Clutch Innovation Description & Operation Sankyo's LM Series offers adjustable torque limiting in any linear axis. It mounts directly to linear slide
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 152 Multivariable cable carrier with extensive accessories and stay variants* TÜV design approved in accordance with 2PfG 1036/10.97** Universal connectors (UMB) 87 PLUS Aluminum stays with ball joint
More informationDoing Our Best to Provide You the Best. 6/16 TP20038,Rev.7. Ford F-150 Pick-Up (2WD) Ford Expedition (2WD) Pin Height - 15 Center /4
6/16 TP2008,Rev.7 Ford F-150 Pick-Up (2WD) Ford Expedition (2WD) 15 Pin Height - 15 Center - 25-/4 14 17 16 15 7 14 5 6 2 8 1 8 2 4 7 16 17 Items 9-12 are not shown. These replace license plate bracket
More information