Ultra - Temp Heavy Duty Unit Cooler

Transcription

1 Heavy uty Unit ooler Publication No. 0.7 November, 000 ir efrost - 6,400 to 7,000 TUH lectric efrost -,800 to 48,000 TUH Hot Gas efrost -,800 to 48,000 TUH Large Walk-Ins and Warehouses ooler & reeze pplications S. erry St., P.. ox 00, rea, Tel (74)59-95 ax (74)59-70

2 eatures PPLITIN - Ultra-Temp unit coolers are ideally suited for a wide range of large coolers, freezers and blast freezers. The U*U and U*L models are designed for use below +5 room temperature. The U*M and UH models are designed for coolers in the medium and high temperature ranges. SIZS - There are 6 sizes available, ranging in capacity from,800 to 7,000 0 T, and ranging in air flow from,70 to 9,900 M. HUSING - ust-free, heavy gauge textured luminum; lightweight and durable. ir and electric defrost models have hinged drain pans to allow for convenient servicing and maintenance (Hot Gas drain pans are not hinged). LITING LGS - fan models and larger are shipped upright with removable lifting legs, allowing the unit to be installed quickly, and easily with a forklift. Slotted hangers are provided for fast installation. IL - Seamless copper tubes are mechanically expanded into heavy gauge corrugated luminum fins to assure maximum heat transfer. ie formed fin collars are provided for accurate fin spacing. Hangers are fastened directly to the tube sheets of the coil to provide high structural strength. ll units are dehydrated, sealed and shipped with a nitrogen holding charge. IGNTS - or use with direct expansion, -, -404, -50 and Specify refrigerant when ordering. separate compartment is provided for all refrigeration connections, allowing ample room for internal mounting of expansion valve(s). Ultra-Temps can also be used for chilled water or glycol solutions, contact factory for selection. NS - Powerful, heavy-duty luminum fans are individually balanced to provide vibration-free operation. Wire fan guards are epoxy coated for corrosion resistance. ptional air straighteners are available for increased air throw. MTS - ll motors are high efficiency PS, ball bearing type, life lubricated and thermally protected. U*U and U*L models use ¾ HP, 075 PM or ¾ HP, 65 PM motors. U*M and UH models use / HP or ¾ HP, 075 PM motors. LTIL - vailable in 5/, 08/0/, 08/0/, 460/ and 460/ (see page 0). Ultra- Temps can also be operated on 0//50, 0//50, 80//50, and 80//50 power (contact factory for details). ll components are factory wired to convenient screw-type terminal blocks. large compartment is supplied for all electrical components and is easily accessible by removing the end panel. I ST - vailable on UM and UH series only for use in coolers at +5 and above. omplete ir efrost systems are available from ussell. LTI ST - vailable on all but the UH models. Placement of the heaters within the refrigeration coil allow for a more efficient and rapid defrost cycle. This arrangement enables heat to be conducted from the center of the core out, for a more even defrost pattern. ll heaters are factory wired to screw-type terminal blocks, allowing for a quick field change over from to phase or 0V to 460V and vice versa with the use of jumpers. n adjustable, remote bulb defrost termination and fan delay (T) is mounted and wired. rain pans are heated for fast, reliable drainage. Timer and contactors are available as options, see page. omplete lectric efrost systems are available from ussell. HT GS -VP ST - vailable on all but the UH models. Includes an adjustable defrost termination and fan delay (T), factory installed. hot gas drain circuit is supplied, thus eliminating the need for electric heat and additional wiring. Heat xchanger/e-vaporator is supplied with every unit. efer to the current Technical ulletin HG for piping. omplete Hot Gas e-vap systems are available from ussell, contact factory. HT GS VS YL ST - vailable on all but the UH models. Includes an adjustable defrost termination and fan delay. (T) factory installed. hot gas drain pan circuit is supplied, thus eliminating the need for electric heat and additional wiring. efer th the current Technical ulletin HG or piping. This unit is also used for lternating vaporator Systems.

3 lectric efrost lectrical ompartment. efrost control (T). T sensing bulb. in heater (typical). ield wiring terminal strips. an motor capacitors Hinged rain Pan (Hot Gas rrangement shown). Hot Gas drain pan loop. rain connection. rain pan latch / tensioner. Hot Gas inlet to drain pan efrigerant onnection ompartment efrigerant nd ompartment (Larger two-circuit Hot Gas coil shown). Hot gas supply (from drain pan). Hot gas inlet to coil (two-pipe). Hot gas inlet to coil (three-pipe) Hot gas outlet from coil (two-pipe). Liquid inlet from TX valve. Suction connection. xternal equalizer line

4 ptions opper fins. oated fins (air and hot gas models only). Galvanized steel casing. High pressure propeller fans (up to 0.5 external pressure). Inherent phase motors. Ultra low temperature motor grease for applications down to -60 suction temperature. Insulated drain pans. ustom circuiting for chilled water or glycol applications. High air throw fan guards. ir Throw ir throw is affected by installation variables. ptimum air throw is obtained by high ceiling with no interference from beams, product or return air restrictions. ML U*U / U*L U*M / UH WI N GU feet feet N GU / I STIGHTN feet feet Nomenclature U U 8 Ultra-Temp TUH in Hundreds = ir efrost (M & H) only = lectric efrost H = Hot Gas e-vap (U, L & M only) G = Hot Gas ev. ycle U = 4 ins/inch (reezer) L = 6 ins/inch (reezer) M = 6 ins/inch (ooler) H = 8 ins/inch (ooler) Number of ans 4

5 5 Performance ata 4 Z P I ML NUM PITY 0 T (404, -) SUTIN TMPTU M U*U-8 U*U-6 U*U-55 U*U-474 U*U4-7 U*U4-85 U*U4-080 U*U5-50 U*U Z P I U*L-5 U*L-5 U*L-9 U*L-40 U*L-04 U*L-6 U*L-408 U*L-445 U*L-540 U*L-6 U*L-660 U*L4-7 U*L4-87 U*L4-950 U*L4-00 U*L4-60 U*L4-80 U*L5-575 U*L5-75 U*L6-890 U*L L P I ML NUM PITY TUH@0 T +0 M U*M-64 U*M-09 U*M-70 U*M-9 U*M-90 U*M-44 U*M-58 U*M-66 U*M4-780 U*M4-88 U*M4-00 U*M4-0 U*M4-656 U*M5-065 U*M L P I ML NUM PITY TUH@0 T +5 M UH-8 UH- UH-00 UH-65 UH-4 UH-490 UH-50 UH-648 UH-76 UH4-866 UH4-980 UH4-00 UH4-45 UH4-8 UH5-75 UH

6 4 Z P I Physical ata ML NUM N I. (In.) MT T () QTY HP PM PTINL HT XH. -VP HT XH. NNTINS (In.) () SUTIN H.G. (UNMT.) (UNMT.) S S MPT U*U-8 0 /4 65 HX-50 H / S -/8 7/8 /4 90 U*U-6 0 /4 65 HX-50 H 7/8 S -/8 7/8 /4 70 U*U-55 4 /4 075 HX-50 H4 7/8 S -5/8 7/8 /4 440 U*U /4 075 HX-500 H5 7/8 S -5/8 7/8 /4 570 U*U /4 075 LHX-5 H6 7/8 S -/8 -/8 -/4 665 U*U /4 075 () HX-500 () H5 () 7/8 S () -/8 -/8 -/4 875 U*U /4 075 () HX-500 () H5 () 7/8 S () -/8 -/8 -/4 900 U*U /4 075 () LHX-5 N/ () 7/8 S () -/8 -/8 -/4 5 U*U /4 075 () LHX-5 N/ () -/8 S () -5/8 -/8 -/4 50 LIQUI IN SHIP WT. (LS) 6 Z P I 6 L P I 8 L P I U*L-5 0 /4 65 HX-50 H / S -/8 7/8 /4 80 U*L-5 0 /4 65 HX-50 H / S -/8 7/8 /4 00 U*L-9 0 /4 65 HX-50 H 5/8 S -/8 7/8 /4 0 U*L-40 0 /4 65 HX-50 H4 7/8 S -/8 7/8 /4 70 U*L-04 0 /4 65 HX-50 H4 7/8 S -/8 7/8 /4 400 U*L-6 4 /4 075 HX-50 H4 7/8 S -5/8 7/8 /4 45 U*L /4 075 HX-50 H5 7/8 S -5/8 7/8 /4 446 U*L /4 075 HX-500 H5 7/8 S -/8 7/8 /4 55 U*L /4 075 HX-500 H5 7/8 S -/8 7/8 /4 585 U*L-6 4 /4 075 LHX-5 H6 7/8 S -/8 7/8 /4 60 U*L /4 075 LHX-5 H6 7/8 S -/8 7/8 /4 645 U*L /4 075 LHX-5 H6 -/8 S -/8 -/8 -/4 675 U*L /4 075 LHX-5 () H5 7/8 S -/8 -/8 -/4 76 U*L /4 075 () HX-500 () H5 () 7/8 S () -/8 -/8 -/4 850 U*L /4 075 () HX-500 () H5 () 7/8 S () -/8 -/8 -/4 885 U*L /4 075 () LHX-5 () H6 () 7/8 S () -/8 -/8 -/4 895 U*L /4 075 () LHX-5 () H6 () 7/8 S () -/8 -/8 -/4 90 U*L /4 075 () LHX-5 N/ () -/8 S () -/8 -/8 -/4 0 U*L /4 075 () LHX-0 N/ () -/8 S () -/8 -/8 -/4 40 U*L /4 075 () LHX-0 N/ () -/8 S () -5/8 -/8 -/4 45 U*L /4 075 () LHX-0 N/ () -/8 S () -5/8 -/8 -/4 65 U*M-64 0 / 075 HX-00 H / S 7/8 7/8 /4 00 U*M-09 0 / 075 HX-50 H 5/8 S 7/8 7/8 /4 0 U*M-70 0 / 075 HX-50 H4 5/8 S -/8 7/8 /4 60 U*M-9 0 / 075 HX-50 H4 5/8 S -/8 7/8 /4 400 U*M-90 4 / 075 HX-50 H4 5/8 S -/8 7/8 /4 45 U*M-44 4 / 075 HX-50 H5 5/8 S -/8 7/8 /4 446 U*M-58 4 / 075 HX-50 H5 5/8 S -/8 7/8 /4 585 U*M-66 4 / 075 HX-50 H6 7/8 S -/8 7/8 /4 60 U*M / 075 HX-500 H6 7/8 S -/8 -/8 -/4 675 U*M / 075 HX-500 () H5 7/8 S -/8 -/8 -/4 76 U*M /4 075 LHX-5 () H5 7/8 S -5/8 -/8 -/4 80 U*M /4 075 LHX-5 () H5 -/8 S -5/8 -/8 -/4 885 U*M /4 075 LHX-0 () H6 -/8 S -/8 -/8 -/4 90 U*M /4 075 LHX-0 N/ -5/8 S -5/8 -/8 -/4 40 U*M /4 075 LHX-5 N/ -5/8 S -5/8 -/8 -/4 65 UH-8 0 / 075 HX-00 N/ 5/8 S 7/8 N/ /4 0 UH- 0 / 075 HX-50 N/ 5/8 S 7/8 N/ /4 0 UH-00 0 / 075 HX-50 N/ 5/8 S -/8 N/ /4 70 UH-65 0 / 075 HX-50 N/ 5/8 S -/8 N/ /4 40 UH-4 4 / 075 HX-50 N/ 5/8 S -/8 N/ /4 45 UH / 075 HX-50 N/ 5/8 S -/8 N/ /4 458 UH-50 4 / 075 HX-50 N/ 7/8 S -/8 N/ /4 550 UH / 075 HX-50 N/ 7/8 S -/8 N/ /4 600 UH-76 4 / 075 HX-50 N/ 7/8 S -/8 N/ /4 65 UH / 075 HX-50 N/ 7/8 S -/8 N/ -/4 690 UH / 075 HX-500 N/ 7/8 S -/8 N/ -/4 746 UH / 075 LHX-5 N/ 7/8 S -/8 N/ -/4 785 UH /4 075 LHX-0 N/ 7/8 S -5/8 N/ -/4 905 UH /4 075 LHX-5 N/ 7/8 S -/8 N/ -/4 90 UH /4 075 LHX-5 N/ -5/8 S -5/8 N/ -/4 65 UH /4 075 LHX-5 N/ -5/8 S -5/8 N/ -/4 95 () ll motors are single phase. ll three fan models and larger are delta wired for three phase power. Inherent three phase motors are available, contact factory. () ll Ultra-Temps are custom circuited for optimum performance and operating efficiency. Should conditions vary from those listed to the right, *connection sizes and quantity may be subject to change, contact factory to confirm. * onnection sizes are based on the following criteria: U*U: - 0 ST, 0 T -404 U*L: - 0 ST, 0 T -404 U*M: +0 ST, 0 T - UH: +5 ST, 0 T - 6

7 imensions - ir and lectric efrost Models I N LTI ST MLS U*L-5 U*U-8 U*M-64 UH-8 U*L-5 U*M-09 UH- U*L-9 U*L-40 U*U-6 U*M-70 UH-00 U*L-04 U*M-9 UH-65 U*L-6 U*U-55 U*M-90 UH-4 U*L-408 U*M-44 UH-490 U*L-445 U*U-474 U*M-58 UH-50 U*L-540 U*M-66 UH-648 U*L-6 UH-76 U*L-660 U*L4-7 U*U4-7 U*M4-780 UH4-866 U*L4-87 U*M4-88 UH4-980 UH4-00 U*L4-950 U*U4-85 U*M4-00 UH4-45 U*L4-00 U*U4-080 U*M4-0 UH4-8 U*L4-60 U*M4-656 U*L4-80 U*L5-575 U*U5-50 U*M5-065 UH5-75 U*L5-75 U*L6-890 U*U6-60 U*M6-480 UH6-70 U*L6-070 QTY HNGS IG. IMNSINS (In.) -/4 5-/4 46-/8 46-/ 4 -/ /8 76-/ 4-/4 4-/ -/4 76-/8 76-/ 5-/4 4 4-/ 06-/8 06-/ 5-/4 5 4-/ -/4 6-/8 6-/ 5-/4 5 4-/ 50-/4 6-/8 6-/ 5-/4 6 4-/ 50-/ 66-/8 66-/ 5-/4 7 4-/ 50-/4 96-/8 96-/ 5-/4 -/ 8-/8 (Typ) /8 8-/8 -/6 ir lectrical Knockouts efrost ontrol 8-/8 5 rain ) 9-/8 MUNTING IMNSIN IS NSISTNT N LL THU 4 NS MLS. ) IGTIN NNTINS N TH I INLT SI () TH UNIT. ) HNG SLTS ½ x ¼. 4) LL IMNSINS IN INHS. 5 4 Knockout or Liquid onnection (ear) Suction onnection (ear) igure -/ (Typ) 8-/8 8-/ /8 -/6 lectrical Knockouts Liquid onn. (ear) 4 7 ir efrost 4 ontrol 5 Suction onn. (ear) -5/8 8-/8 5 rain ) 9-/8 MUNTING IMNSIN IS NSISTNT N LL 4 THU 6 NS MLS. ) IGTIN NNTINS N TH I INLT SI () TH UNIT. ) HNG SLTS ½ x ¼. 4) LL IMNSINS IN INHS. igure 7

8 imensions - Hot Gas efrost Models I N LTI ST MLS U*L-5 U*U-8 U*M-64 U*L-5 U*M-09 U*L-9 U*L-40 U*U-6 U*M-70 U*L-04 U*M-9 U*L-6 U*U-55 U*M-90 U*L-408 U*M-44 U*L-445 U*U-474 U*M-58 U*L-540 U*M-66 U*L-6 U*L-660 U*L4-7 U*U4-7 U*M4-780 U*L4-87 U*M4-88 U*L4-950 U*U4-85 U*M4-00 U*L4-00 U*U4-080 U*M4-0 U*L4-60 U*M4-656 U*L4-80 U*L5-575 U*U5-50 U*M5-065 U*L5-75 U*L6-890 U*U6-60 U*M6-480 U*L6-070 QTY HNGS IG. IMNSINS (In.) -/4 6-7/8 46-/8 46-/ 4 6-/8 -/4 7-/8 76-/8 76-/ 4 6-/8 4-/ -/8 76-/8 76-/ 5-/4 -/8 4 4-/ -7/8 06-/8 06-/ 5-/4 -/8 5 4-/ 4-/4 6-/8 6-/ 5-/4 -/ / 5-/4 6-/8 6-/ 5-/4 50-/ / 5-/4 66-/8 66-/ 5-/4 50-/ / 5-/4 96-/8 96-/ 5-/4 50-/8 ) 9-/8 MUNTING IMNSIN IS NSISTNT N LL THU 4 NS MLS. ) IGTIN NNTINS N TH I INLT SI () TH UNIT. ) HNG SLTS ½ x ¼. 4) LL IMNSINS IN INHS. igure -/ (Typ) -/6-5/8 ir 8-/8 8-/ /8 lectrical Knockouts Liquid onn. (ear) 4 efrost ontrol 8-/8 5 rain Suction onn. (ear) ) 9-/8 MUNTING IMNSIN IS NSISTNT N LL 4 THU 6 NS MLS. ) IGTIN NNTINS N TH I INLT SI () TH UNIT. ) HNG SLTS ½ x ¼. 4) LL IMNSINS IN INHS. igure 4 8

9 Suction Line Heat xchangers ML NUM XH5 XH50 XH75 XH00 XH50 XH50 XH50 XH500 LXH5 LXH0 LXH5 LXH0 PITY - TUH (-, -404) SUTIN TMPTU ( ) IMNSINS (In) -/ -/4-5/8 4-/8 4-/8 4-/4 6-/4 7-/4 9-/ 9-/ 8 8 -/4 -/8-5/8-7/8-5/8-5/8 4-5/8 6-7/8 6-7/8 7-/ 8 NNTINS (S) (In) LIQUI SUTIN /4 / /8 5/8 /8 7/8 /8 -/8 / -/8 5/8 -/8 5/8-5/8 7/8 -/8 7/8 -/8 -/8 -/8 -/8-5/8 -/8-5/8 WT. (lbs) LIQUI SUTIN SUTIN LIQUI igure 5 Suction Line Heat xchangers - ccumulator ML NUM H- H- H- H-4 H-5 H-6 PITY TUH 6,000,000 4,000 6,000 55,000 80,000 IMNSINS (In) 9-/4 5 5-/4 5 7-/4 5 7-/ / /8 6 NNTINS (In.) LIQUI (S) SUTIN (S) INLT UTLT INLT UTLT /8 /8 7/8 7/8 / / -/8 -/8 / / -/8 -/8 5/8 5/8-5/8-5/8 5/8 5/8 -/8 -/8 7/8 7/8-5/8-5/8 WT. (lbs) "" Suction out "" Liquid In "" Liquid In igure 6 NT: Mount the Heat xcahnger / ccumulator level, within the refrigerated space, as clsoe to the evaporator as possible. "" Suction out 9

10 4 Z P I lectrical ata ML NUM TTL MT MPS () 60 Hz 5 V. 08/0 V. 460 V. PH PH PH PH PH LTI ST (4) MPG 60 Hz 08 V. 0 V. 460 V. PH PH PH PH PH PH U*U ,5 U*U ,8 U*U ,8 U*U ,5 U*U ,440 U*U ,660 U*U ,660 U*U ,575 U*U ,490 WTTS 6 Z P I 6 L P I U*L ,5 U*L ,5 U*L ,5 U*L ,8 U*L ,8 U*L ,8 U*L ,8 U*L ,5 U*L ,5 U*L ,5 U*L ,5 U*L ,440 U*L ,440 U*L ,660 U*L ,660 U*L ,660 U*L ,660 U*L ,575 U*L ,575 U*L ,490 U*L ,490 U*M ,5 U*M ,5 U*M ,8 U*M ,8 U*M ,8 U*M ,8 U*M ,5 U*M ,5 U*M ,440 U*M ,440 U*M ,660 U*M ,660 U*M ,660 U*M ,575 U*M ,490 4 L P I UH UH UH UH UH UH UH UH UH UH UH UH UH UH UH UH UH MLS NLY VILL IN I ST N NT MMN PPLITINS LW 5 M TMPTU () ll models have single phase motors. Three fan models and larger are delta wired for three phase supply power. (4) ll electric defrost models are standard three phase heaters unless otherwise specified. See table above to determine models applicable to single phase heater applications. 0

11 4 Z P I 6 Z P I 6 L P I lectrical efrost Kits ML NUM U*U-8 U*U-6 U*U-55 U*U-474 U*U4-7 U*U4-85 U*U4-080 U*U5-50 U*U6-60 U*L-5 U*L-5 U*L-9 U*L-40 U*L-04 U*L-6 U*L-408 U*L-445 U*L-540 U*L-6 U*L-660 U*L4-7 U*L4-87 U*L4-950 U*L4-00 U*L4-60 U*L4-80 U*L5-575 U*L5-75 U*L6-890 U*L6-070 U*M-64 U*M-09 U*M-70 U*M-9 U*M-90 U*M-44 U*M-58 U*M-66 U*M4-780 U*M4-88 U*M4-00 U*M4-0 U*M4-656 U*M5-065 U*M6-480 () onsult factory. VPT 0/ 460/ () () () () VPTS 0/ 460/ () () () () () () () () VPTS 0/ 460/ () () () () () () () () () () () () () () () () () lectrical efrost Kit omponents ML NUM TIM UXILIY SWITH LK- UT LY NTTS ST HTS N SQUNY LY TIM Initiates the defrost cycle. lso used as over ride protection for defrost termination. UXILIY SWITH Mounted on the compressor contactor, it prevents the defrost contactor from operating whenever the compressor is energized. LK-UT LY Serves the same function as auxiliary switch, except used when defrost contactor is not required (single phase only). N NTT Used with 460 V. motors or when 0 V. motors are wired for phase power. ST NTT arries amperage load for heaters. ontactor selection is based on the maximum resistive load rating of the contactor. SQUNING LYS Provides interconnection of multiple unit coolers on a single system so that each unit cooler is allowed to individually terminate defrost on temperature.

12 S. erry St., P.. ox 00, rea, Tel (74)59-95 ax (74)59-70