TOTALINE REFRIGERATION CONDENSERS

Transcription

1 TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS Totaline s refrigeration condensers are used for refrigeration systems. These condensers are designed for large coolers or freezers. The Totaline fluid cooler is suitable as a secondary heat exchanger. Condensers are available in capacities from 41,000 BTUH to over 3 million BTUH. Dry type fluid coolers from 5 GPM to over 400 GPM. Condenser Features All Totaline refrigeration condensers provide the design flexibility required in replacement, renovation, and new construction. All refrigeration unit condensers feature the following benefits: Fan motors feature permanently lubricated, sealed ball bearings and inherent thermal protection for long life and dependable service Fan guards and motor mounts are welded wire construction for full protection from moving parts. Baked on powder epoxy coating protects from corrosion Aluminum fan blades are statically and dynamically balanced for smooth, vibration-free operation PVC coated wire fan guards with aluminum fans Labeled terminal block for field wiring Modular design allows minimal part inventory and replacement Plated hardware for light weight and corrosion-free assembly Weather resistant control box protects motor wiring Smooth tubes simplify change from CFC and HCFC to HFC refrigerant Exclusive non-metallic supports for friction free coil assembly Dry fluid coolers FXBs Available in single or multi circuits All units are ETL and CSA approved P4377 Dry Fluid Cooler & Heat Reclaim Unit Features Designed with features identical to our air-cooled condensers Options Copper to be copper fin coils available option Various fins spacing 6, 8, 10, 12 fins per inch Wide range of head pressure control from fan cycling methods as well as various flooding control methods to meet your application needs Wide range of control box options Available Types of Protective Coatings Pre-coated epoxy aluminum (Gold color) Blygold (PoluAl) (Aluminum color) Heresite (Baked Phenolic) (Brown Color) General Notes Packing Standard domestic packaging which provides coil protection Optional, full crate Ordering Information NOTE: You must order a control box and condenser/fluid cooler using two separate P/Ns. The two P/Ns must be submitted together as one order. 728

2 TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS AIR-COOLED CONDENSER, HEAT RECLAIM & DRY-TYPE FLUID COOLER NOMENCLATURE P703 C L D 180 H 9 Totaline Condenser C Condenser H Heat Reclaim F Dry Type Fluid Cooler Unit Voltage (V/Ph/Hz) 2 240/1/ /3/ /3/ /3/60 Horsepower (RPM) C 1/4 (825) M 1/2 (1140) L 1 (825) I 1-1/2 (1140) H 1-1/2 (850) Q 1/2 (560) Airflow H Horizontal Airflow D Direct Drive 8 8 Fins Per Inch (FPI) Nominal Condenser THR F TD (R-22) LEGEND TD Temperature Difference 729

3 TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS AIR-COOLED CONDENSER & FLUID COOLER CONTROL PANEL NOMENCLATURE TOTALINE TYPE OF FAN UNIT CONTROL OPTIONS PANEL PANEL ARRANGEMENT VOLTAGE VOLTAGE P ACE 11 = 1 x /1/ /1/60 12 = 1 x /3/ /1/60 13 = 1 x /3/60 X 24/1/60 14 = 1 x /3/60 N NONE 15 = 1 x 5 22 = 2 x 2 23 = 2 x 3 N NONE 24 = 2 x 4 A MOTOR FUSING (IN PAIR FOR TWO FAN WIDE UNIT) 25 = 2 x 5 B INDIVIDUAL MOTOR FUSING (FOR TWO FAN WIDE UNIT ONLY) 26 = 2 x 6 C SPEED MOTOR CONTROLLER (PRESSURE SENSING) D SPEED MOTOR CONTROLLER (TEMPERATURE SENSING) E NON-FUSED DISCONNECT F FUSED DISCONNECT STANDARD PANELS 01 CONTROL BOX, TERMINAL BLOCK, NO CONTROLS, NO CONTACTORS 02 CONTACTOR(S) WITHOUT CONTROLS 03 CONTACTOR(S), AMBIENT FAN CYCLING 04 CONTACTOR(S), PRESSURE FAN CYCLING (2) 05 CONTACTOR(S), PRESSURE FAN CYCLING, DUAL CIRCUITS (3) 06 CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL (1, 2) 07 CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1, 2) 10 CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL (1, 2) 11 CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1, 2) 12 CONTACTOR(S), MOTORS INDIVIDUALLY WIRED, NO CONTROLS (4, 5) 13 SPLIT ELECTRICAL, CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL (1,4,5,6) 14 SPLIT ELECTRICAL, CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1,4,5,6) 16 SPLIT ELECTRICAL, CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL (1,4,5,6) 17 SPLIT ELECTRICAL, CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1,4,5,6) 18 SPLIT ELECTRICAL, CONTACTOR(S), AMBIENT FAN CYCLING (4,5,6) 19 SPLIT ELECTRICAL, CONTACTOR(S), PRESSURE FAN CYCLING (3,4,5,6) 20 CONTACTOR(S), AMBIENT FAN CYCLING WITH PRESSURE OVERRIDE (2) 55 SPECIAL CONTROL PANEL SPECIFICATIONS: 1 AVAILABLE ONLY ON FLUID COOLED UNITS 2 AVAILABLE ONLY ON SINGLE CIRCUIT OR TWO CIRCUITS FOR SINGLE CIRCUIT APPLICATION 3 AVAILABLE ONLY ON TWO REFRIGERANT CIRCUITS UNITS 4 AVAILABLE ONLY ON TWO FANS WIDE UNITS 5 FAN MOTORS ARE INDIVIDUALLY WIRED, NOT IN PAIR (OPTION A NOT AVAILABLE) 6 DUAL POWER SUPPLY FOR TWO FANS WIDE UNITS (SUPPLIED WITH TWO ELECTRICAL BOXES) NOTES: 1 FIRST STAGE IS NOT CYCLED, UNLESS OTHERWISE NOTED 2 ON TWO FAN WIDE UNITS, FAN MOTORS ARE WIRED IN PAIRS, UNLESS OTHERWISE NOTED 730

4 TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS LOW CFM AIR-COOLED CONDENSERS (Standard Fin Spacing) TOTAL HEAT REJECTION MBTUH REFRIGERANT PART (R-22, R-134a) CONNECTION SIZES CAP./CKT FAN CHARGE SHIPPING TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) Btuh/F TD ARRANGEMENT WEIGHT (CKT) 1 F 15 F 20 F 25 F 30 F Discharge Liquid Summer Winter P703-CCD X 1 7/8 5/ P703-CCD X 1 7/8 5/ P703-CCD X 1 7/8 7/ P703-CMD X 1 7/8 7/ P703-CMD X 1 7/8 7/ P703-CMD X 1 1-1/8 7/ P703-CMD X 2 1-1/8 7/ P703-CMD X 2 1-1/8 1-1/ P703-CMD X 2 1-1/8 1-1/ P703-CMD X 2 1-1/8 1-1/ P703-CMD X 2 1-3/8 1-1/ P703-CMD X 3 1-3/8 1-1/ P703-CMD X 3 1-3/8 1-1/ P703-CMD X 3 1-3/8 1-1/ P703-CMD X 3 1-3/8 1-1/ P703-CLD X 1 1-1/8 1-1/ P703-CLD X 1 1-1/8 1-1/ P703-CLD X 1 1-1/8 1-1/ P703-CLD X 1 1-1/8 1-1/ P703-CLD X 1 1-3/8 1-1/ P703-CLD X 1 1-3/8 1-1/ P703-CLD X 2 1-3/8 1-1/ P703-CLD X 2 1-3/8 1-3/ P703-CLD X 2 1-5/8 1-3/ P703-CLD X 2 1-5/8 1-3/ P703-CLD X 2 1-5/8 1-3/ P703-CLD X 2 1-5/8 1-3/ P703-CLD X 3 1-5/8 1-5/ P703-CLD X 3 2-1/8 1-5/ P703-CLD X 2 (2) 1-3/8 (2) 1-3/ P703-CLD X 3 2-1/8 1-5/ P703-CLD X 3 2-1/8 1-5/ P703-CLD X 2 (2) 1-5/8 (2) 1-3/ P703-CLD X 4 2-1/8 1-5/ P703-CLD X 2 (2) 1-5/8 (2) 1-3/ P703-CLD X 4 2-1/8 1-5/ P703-CLD X 2 (2) 1-5/8 (2) 1-3/ P703-CLD X 4 2-1/8 1-5/ P703-CLD X 2 (2) 1-5/8 (2) 1-3/ P703-CLD X 4 2-1/8 1-5/ P703-CLD X 3 (2) 1-5/8 (2) 1-3/ P703-CLD X 5 2-1/8 2-1/ P703-CLD X 5 2-1/8 2-1/ P703-CLD X 5 2-1/8 2-1/ P703-CLD X 3 (2) 2-1/8 (2) 1-5/ P703-CLD X 3 (2) 2-1/8 (2) 1-5/ P703-CLD X 3 (2) 2-1/8 (2) 1-5/ P703-CLD X 4 (2) 2-1/8 (2) 1-5/ P703-CLD X 4 (2) 2-1/8 (2) 1-5/ P703-CLD X 4 (2) 2-1/8 (2) 1-5/ P703-CLD X 4 (2) 2-1/8 (2) 1-5/ P703-CLD X 5 (2) 2-1/8 (2) 2-1/ P703-CLD X 5 (2) 2-1/8 (2) 2-1/ P703-CLD X 5 (2) 2-1/8 (2) 2-1/ P703-CLD X 5 (2) 2-1/8 (2) 2-1/ P703-CLD X 6 (2) 2-5/8 (2) 2-1/ P703-CLD X 6 (2) 2-5/8 (2) 2-1/ P703-CLD X 6 (2) 2-5/8 (2) 2-1/ LEGEND TD Temperature Difference NOTES: 1. Multiply capacity by 0.98 for R-404A and R Multiply capacity by 0.92 for 50 Hz units. 3. Connections are based on 30 F TD, 40 F suction and R Refrigerant summer charge is based on 100 F liquid, 30% liquid and 70% vapor. 5. Refrigerant winter charge is based on 20 F liquid, 90% liquid and 10% vapor. 731

5 TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS LOW CFM AIR-COOLED CONDENSERS (8 FPI) TOTAL HEAT REJECTION MBTUH REFRIGERANT PART (R-22, R-134a) CONNECTION SIZES CAP./CKT FAN CHARGE SHIPPING TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) Btuh/F TD ARRANGEMENT WEIGHT (CKT) 1 F 15 F 20 F 25 F 30 F Discharge Liquid Summer Winter P703-CL X 1 1-1/8 1-1/ P703-CL X 1 1-1/8 1-1/ P703-CL X 1 1-3/8 1-1/ P703-CL X 2 1-3/8 1-1/ P703-CL X 2 1-5/8 1-3/ P703-CL X 2 1-5/8 1-3/ P703-CL X 3 1-5/8 1-5/ P703-CL X 2 (2) 1-3/8 (2) 1-3/ P703-CL X 3 2-1/8 1-5/ P703-CL X 2 (2) 1-5/8 (2) 1-3/ P703-CL X 4 2-1/8 1-5/ P703-CL X 2 (2) 1-5/8 (2) 1-3/ P703-CL X 4 2-1/8 1-5/ P703-CL X 3 (2) 1-5/8 (2) 1-3/ P703-CL X 5 2-1/8 2-1/ P703-CL X 5 2-1/8 2-1/ P703-CL X 3 (2) 2-1/8 (2) 1-5/ P703-CL X 3 (2) 2-1/8 (2) 1-5/ P703-CL X 4 (2) 2-1/8 (2) 1-5/ P703-CL X 4 (2) 2-1/8 (2) 1-5/ P703-CL X 5 (2) 2-1/8 (2) 2-1/ P703-CL X 5 (2) 2-1/8 (2) 2-1/ P703-CL X 6 (2) 2-5/8 (2) 2-1/ P703-CL X 6 (2) 2-5/8 (2) 2-1/ LEGEND FPI Fins per inch NOTES: 1. Multiply capacity of 0.98 for R-404A and R Multiply capacity by 0.92 for 50 Hz units. 3. Connections are based on 30 F TD, 40 F suction and R Refrigerant summer charge is based on 100 F liquid, 30% liquid and 70% vapor. 5. Refrigerant winter charge is based on 20 F liquid, 90% liquid and 10% vapor. HEAT RECLAIM UNITS TOTAL HEAT REJECTION MBTUH PART (R-22, R-134a) CONNECTION SIZES REFRIGERANT SHIPPING CAP./CKT FAN TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) CHARGE WEIGHT Btuh/F TD ARRANGEMENT (CKT) 1 F 30 F 35 F 40 F 45 F Discharge Liquid P703-HCD X 1 1-1/8 1-1/ P703-HCD X 1 1-1/8 1-1/ P703-HCD X 1 1-1/8 1-1/ P703-HMD X 1 1-3/8 1-3/ P703-HMD X 1 1-3/8 1-3/ P703-HMD X 1 1-3/8 1-3/ P703-HMD X 2 1-5/8 1-5/ P703-HMD X 2 1-5/8 1-5/ P703-HMD X 2 2-1/8 2-1/ P703-HMD X 2 2-1/8 2-1/ P703-HMD X 2 2-1/8 2-1/ P703-HMD X 3 2-1/8 2-1/ P703-HMD X 3 2-1/8 2-1/ P703-HMD X 3 2-1/8 2-1/ P703-HMD X 3 2-1/8 2-1/ NOTES: 1. Multiply capacity of 0.98 for R-404A and R Multiply capacity by 0.92 for 50 Hz units. 3. Connections sizes are based on 40 F TD at 50% recovery. 4. Refrigerant charge is based on 10% liquid and 90% vapor. 732

6 TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS HIGH CFM AIR-COOLED CONDENSERS (Standard Fins) TOTAL HEAT REJECTION MBTUH REFRIGERANT PART (R-22, R-134a) CONNECTION SIZES CAP./CKT FAN CHARGE SHIPPING TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) Btuh/F TD ARRANGEMENT WEIGHT (CKT) 1 F 15 F 20 F 25 F 30 F Discharge Liquid Summer Winter P703-CID X 1 1-1/8 1-1/ P703-CID X 1 1-1/8 1-1/ P703-CID X 1 1-1/8 1-1/ P703-CID X 1 1-1/8 1-1/ P703-CID X 1 1-3/8 1-1/ P703-CID X 1 1-3/8 1-1/ P703-CID x 2 1-3/8 1-1/ P703-CID X 2 1-3/8 1-3/ P703-CID X 2 1-5/8 1-3/ P703-CID X 2 1-5/8 1-3/ P703-CID X 2 1-5/8 1-3/ P703-CID X 2 1-5/8 1-3/ P703-CID X 3 1-5/8 1-5/ P703-CID X 3 2-1/8 1-5/ P703-CID X 2 (2) 1-3/8 (2) 1-3/ P703-CID X 3 2-1/8 1-5/ P703-CID X 3 2-1/8 1-5/ P703-CID X 2 (2) 1-5/8 (2) 1-3/ P703-CID X 4 2-1/8 1-5/ P703-CID X 2 (2) 1-5/8 (2) 1-3/ P703-CID X 4 2-1/8 1-5/ P703-CID X 2 (2) 1-5/8 (2) 1-3/ P703-CID X 4 2-1/8 1-5/ P703-CID X 2 (2) 1-5/8 (2) 1-3/ P703-CID X 4 2-1/8 1-5/ P703-CID X 3 (2) 1-5/8 (2) 1-3/ P703-CID X 5 2-1/8 2-1/ P703-CID X 5 2-1/8 2-1/ P703-CID X 5 2-1/8 2-1/ P703-CID X 3 (2) 2-1/8 (2) 1-5/ P703-CID X 3 (2) 2-1/8 (2) 1-5/ P703-CID X 3 (2) 2-1/8 (2) 1-5/ P703-CID X 4 (2) 2-1/8 (2) 1-5/ P703-CID X 4 (2) 2-1/8 (2) 1-5/ P703-CID X 4 (2) 2-1/8 (2) 1-5/ P703-CID X 4 (2) 2-1/8 (2) 1-5/ P703-CID X 5 (2) 2-1/8 (2) 2-1/ P703-CID X 5 (2) 2-1/8 (2) 2-1/ P703-CID X 5 (2) 2-1/8 (2) 2-1/ P703-CID X 5 (2) 2-1/8 (2) 2-1/ P703-CID X 6 (2) 2-5/8 (2) 2-1/ P703-CID X 6 (2) 2-5/8 (2) 2-1/ P703-CID X 6 (2) 2-5/8 (2) 2-1/ NOTES: 1. Multiply capacity of 0.98 for R-404A and R Multiply capacity by 0.92 for 50 Hz units. 3. Connections sizes are based on 30 F TD, 40 F suction and R Refrigerant summer charge is based on 100 F liquid, 30% liquid and 70% vapor. 5. Refrigerant winter charge is based on 20 F liquid, 90% liquid and 10% vapor. 733

7 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS Thirteen different models of unit coolers featuring many capacities and types allow flexibility to meet most applications. Standard Features: All Totaline refrigeration coolers provide the design flexibility required in replacement, renovation, and new construction. Unit coolers are available in many models to suit most needs. Low sound levels Heavy duty construction Wide selection of fin spacing available Corrosion resistant fan guards (silver color) Easy access to refrigerant and electrical connections Warranty against material and labor defects UL listed NSF approved Options: Custom coil manufacturing i.e., gravity coils, copper tube/copper fin Custom fin spacing i.e., 3 Fin Per Inch TX valves and solenoid valves Option coil coating available for adverse environments Available Types of Protective Coating: Pre-coated epoxy aluminum (Gold color) Blygold (Polu Al) (Aluminum color) Heresite (Baked Pheonolic) (Brown color) General Note: 240 volt unit can be used for /1/50. P4378A P4378B P4378D P704 NOMENCLATURE P704 E L A Totaline Unit Cooler E Evaporator Unit Voltage (V/Ph/Hz) 1 120/1/ /1/ /3/ /3/ /3/60 B Blast Freezer C Compact Reach-In D Dual Flow Reach-In F Free Standing Blast Freezer H High Profile Unit Cooler I Industrial Unit Cooler K Compact Unit Cooler L Low Height Unit Cooler M Medium Profile Unit Cooler P Medium Velocity Unit Cooler S Single Flow Unit Cooler V Low Velocity Unit Cooler W Wall Mount Reach-In A Air Defrost E Electric Defrost G Reverse Cycle Defrost With Electric Heated Drain Pan H Three Pipe Defrost With Electric Heated Drain Pan R Reverse Cycle Hot Gas Defrost T Three Pipe Hot Gas Defrost Product Generation Unit F TD 22,400 Btuh LEGEND TD Temperature Difference 734

8 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ECA SPACE SAVER REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Single coil construction. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Air is discharged through the back of the unit. Ceiling or back wall mounting. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-ECA100-(1) /4 7-3/4 16-5/ P704-ECA130-(1) /4 7-3/4 16-5/ P704-ECA150-(1) /4 7-3/4 16-5/ P4379 P704-EWA MULLION REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Single coil construction. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Up or down airflow. Wall or mullion mounted. Upflow standard configuration can be modified to downflow. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EWA130-(1) /4 18-1/4 15-3/4 13 P704-EWA180-(1) /4 18-1/4 15-3/4 14 P704-EWA230-(1) /4 18-1/4 21-3/4 17 Models ECA and EWA are available in: 1 = 120/1/60 2 = 240/1/60 NOTE: Standard voltage for ECA and EWA is 120/1/60, optional voltage is 240/1/60. P4380 P704-EDA DUAL FLOW REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Dual coil construction for equal air distribution on both sides of the cooler. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, impedance protected, heavy duty fan motors are provided for long life and dependable service. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EDA102-(1) /8 3-1/2 18-1/ P704-EDA132-(1) /8 3-1/2 18-1/ P704-EDA152-(1) /8 4-1/2 18-1/8 13 P704-EDA182-(1) /8 4-1/2 18-1/8 14 P704-EDA232-(1) /8 5-1/2 20-1/8 17 P704-EDA282-(1) /8 5-1/2 20-1/ P704-EDA332-(1) /8 5-1/2 20-1/8 20 P

9 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ESA SINGLE FLOW REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Single coil construction for air distribution on the back of cooler. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, impedance protected, heavy duty fan motors are provided for long life and dependable service. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-ESA102-(1) /2 17-1/4 9.0 P704-ESA132-(1) /2 17-1/ P704-ESA152-(1) /2 21-3/ P704-ESA182-(1) /2 25-3/ P704-ESA232-(1) /2 33-3/ P704-ESA282-(1) /2 33-3/ P704-ESA332-(1) /2 33-3/ P704-ESA452-(1) /2 43-3/ P704-ESE552-(1) /2 43-3/ P4382 Models EDA and ESA are available in: 1 = 120/1/60 2 = 240/1/60 NOTE: Standard voltage for EDA and ESA is 120/1/60, optional is 240/1/60. P704-ESE SINGLE FLOW REACH-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 20 TO +34 F Single coil construction for air distribution to back of cooler or freezer. These units are provided with stainless steel low watt density tubular heaters, defrost termination and fan delay thermostat for positive defrost and high efficiency. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, impedance protected, heavy duty fan motors are provided for long life and dependable service. Electric Defrost P4382 MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 20 F +20 F Depth Height Width WEIGHT (Lbs) P704-ESE102-(1) /2 17-1/ P704-ESE132-(1) /2 17-1/ P704-ESE152-(1) /2 21-3/ P704-ESE182-(1) (2) /2 25-3/ P704-ESE232-(1) (2) /2 33-3/ P704-ESE282-(1) (2) /2 33-3/ P704-ESE332-(1) (2) /2 33-3/ P704-ESE452-(1) (2) /2 43-3/ P704-ESE552-(1) (2) /2 43-3/ Model ESE is available in: 1 = 120/1/60 2 = 240/1/60 NOTE: Standard voltage for ESE is 240/1/60, optional voltage is 120/1/

10 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ELA HIGH VELOCITY WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F High velocity/single coil construction for air distribution toward the center of the cooler. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. Air throw is 20 to 30 ft. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-ELA0381-(1) 3,800 5, /2 13-1/4 31-1/8 35 P704-ELA0491-(1) 4,900 7, /2 13-1/4 31-1/8 39 P704-ELA0561-(1) 5,600 8, /2 13-1/4 31-1/8 42 P704-ELA0661-(1) 6,600 9, /2 13-1/4 43-1/8 52 P704-ELA0831-(1) 8,300 12, /2 13-1/4 43-1/8 57 P704-ELA0961-(1) 9,600 14, /2 13-1/4 43-1/8 63 P704-ELA1121-(1) 11,200 16, /2 13-1/4 51-1/8 96 P704-ELA1471-(1) 14,700 22, /2 13-1/4 71-1/8 107 P704-ELA1681-(1) 16,800 25, /2 13-1/4 71-1/8 123 P704-ELA1851-(1) 18,500 27, /2 13-1/4 71-1/8 138 P704-ELA2241-(1) 22,400 33, /2 13-1/4 91-1/8 152 P704-ELA2801-(1) 28,000 42, /2 13-1/ /8 180 P704-ELA3361-(1) 33,600 50, /2 13-1/ /8 207 P704-ELA3701-(1) 37,000 55, /2 13-1/ /8 220 Model ELA is available in: 1 = 120/1/60 2 = 240/1/60 5 = /3/60 NOTE: Standard voltage for ELA is 120/1/60, optional voltage is 240/1/60. ELA/ELE P4384 P704-ELE HIGH VELOCITY WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 20 TO +34 F High velocity/single coil construction for air distribution toward the center of the cooler. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. Air throw is 20 to 30 ft. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Electric Defrost MODEL CAPACITY 10 F TD UNIT SIZE (in.) SHIPPING 20 F +20 F Depth Height Width WEIGHT (Lbs) P704-ELE0441-(2) 3,740 4, /2 13-1/4 31-1/4 45 P704-ELE0521-(2) 4,420 5, /2 13-1/4 31-1/4 47 P704-ELE0781-(2) 6,630 7, /2 13-1/4 43-1/4 64 P704-ELE0901-(2) 7,650 9, /2 13-1/4 43-1/4 70 P704-ELE1041-(2) 8,840 10, /2 13-1/4 51-1/4 105 P704-ELE1321-(2) 11,220 13, /2 13-1/4 71-1/4 120 P704-ELE1561-(2) 13,260 15, /2 13-1/4 71-1/4 135 P704-ELE1751-(2) 14,875 17, /2 13-1/4 71-1/4 146 P704-ELE2081-(2) 17,680 20, /2 13-1/4 91-1/4 168 P704-ELE2601-(2) 22,100 26, /2 13-1/ /4 199 P704-ELE3121-(2) 26,520 31, /2 13-1/ /4 230 P704-ELE3501-(2) 29,750 35, /2 13-1/ /4 243 Model ELE is available in: NOTE: Standard voltage for ELE is 240/1/60, optional voltage is 120/1/60. 1 = 120/1/60 2 = 240/1/60 5 = /3/60 Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Series ELE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, terminal block, defrost termination and fan delay thermostat for positive defrost and high efficiency. 737

11 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ELR/ELT HIGH VELOCITY WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS AND FREEZERS FROM 30 F TO +34 F High velocity/single coil construction for air distribution toward the center of the cooler. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. Air throw is 20 to 30 ft. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. ELR and ELT series are provided with hot gas drain pan grid, adjustable fan delay thermostat and defrost termination thermostat. P4384 ELR Reverse style hot gas defrost ELT Three pipe hot gas defrost with gas drain pan Gas Defrost CAPACITY (BTU/H) MODEL UNIT SIZE (in.) FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EL( )0441-(1) 3,740 4, /2 13-1/4 31-1/4 42 P704-EL( )0521-(1) 4,420 5, /2 13-1/4 31-1/4 45 P704-EL( )0781-(1) 6,630 7, /2 13-1/4 43-1/4 60 P704-EL( )0901-(1) 7,650 9, /2 13-1/4 43-1/4 66 P704-EL( )1041-(1) 8,840 10, /2 13-1/4 51-1/4 99 P704-EL( )1321-(1) 11,220 13, /2 13-1/4 71-1/4 113 P704-EL( )1561-(1) 13,260 15, /2 13-1/4 71-1/4 128 P704-EL( )1751-(1) 14,875 17, /2 13-1/4 71-1/4 148 P704-EL( )2081-(1) 17,680 20, /2 13-1/4 91-1/4 159 P704-EL( )2601-(1) 22,100 26, /2 13-1/ /4 187 P704-EL( )3121-(1) 26,520 31, /2 13-1/ /4 215 P704-EL( )3501-(1) 29,750 35, /2 13-1/ /4 238 Models ELR and ELT are available in: 1 = 120/1/60 2 = 240/1/60 5 = /3/60 NOTES: 1. Standard voltage for ELR and ELT is 120/1/60, optional voltage is 240/1/ Standard units are 6 FPI, for 4 FPI multiply capacity by

12 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EPA MEDIUM VELOCITY WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Medium velocity/dual coil construction. Air distribution on either side of the cooler. Air throw is 8 to 15 ft each side. Heavy gauge textured aluminum casings with polycarbonate fan guards, ALUMINUM fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EPA0561-(1) 5,600 8, /2 31-3/8 51 P704-EPA0831-(1) 8,300 12, /2 43-3/8 69 P704-EPA0961-(1) 9,600 14, /2 43-3/8 75 P704-EPA1121-(1) 11,200 16, /2 51-3/8 98 P704-EPA1471-(1) 14,700 22, /4 71-3/8 110 P704-EPA1681-(1) 16,800 25, /4 71-3/8 121 P704-EPA1851-(1) 18,500 27, /4 71-3/8 143 P704-EPA2241-(1) 22,400 33, /4 91-3/8 156 P704-EPA2801-(1) 28,000 42, /8 193 P704-EPA3361-(1) 33,600 50, /8 227 P704-EPA3701-(1) 37,000 55, /8 248 Model EPA is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EPA is 120/1/60, optional voltage is 240/1/60. EPA/EPE P4386 P704-EPE MEDIUM VELOCITY WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS FROM +26 F TO +34 F Medium velocity/dual coil construction. Air distribution on either side of the cooler. Air throw is 8 to 15 ft each side. Heavy gauge textured aluminum casings with polycarbonate fan guards, ALUMINUM fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Series EPE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, terminal block, defrost termination and fan delay thermostat for positive defrost and high efficiency. Electric Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EPE0521-(2) 5,200 7, /2 31-3/8 56 P704-EPE0781-(2) 7,800 11, /2 43-3/8 77 P704-EPE0901-(2) 9,000 13, /2 43-3/8 83 P704-EPE1041-(2) 10,400 15, /2 51-3/8 108 P704-EPE1321-(2) 13,200 19, /4 71-3/8 124 P704-EPE1561-(2) 15,600 23, /4 71-3/8 135 P704-EPE1751-(2) 17,500 26, /4 71-3/8 160 P704-EPE2081-(2) 20,800 31, /4 91-3/8 176 P704-EPE2601-(2) 26,000 39, /8 216 P704-EPE3121-(2) 31,200 46, /8 256 P704-EPE3501-(2) 35,000 52, /8 267 Model EPE is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EPE is 240/1/60, optional voltage is 120/1/ Standard units are 6 FPI, for 4 FPI multiply capacity by

13 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EPG/EPH MEDIUM VELOCITY WALK-IN-UNIT COOLERS (Gas Defrost) Medium velocity/dual coil construction. Air distribution on either side of the cooler. Air throw is 8 to 15 ft each side. Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Series EPG and EPH units are provided with stainless steel low watt density drain pan heaters, terminal block, fan and drain pan controls for positive defrost and high efficiency. EPG Reverse cycle hot gas defrost with electric drain pan heater. EPH Three pipe hot gas defrost with electric drain pan heater. EPG/EPH P4386 Gas Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EP( )0521-(1) 5,200 7, /2 31-3/8 54 P704-EP( )0781-(1) 7,800 11, /2 43-3/8 72 P704-EP( )0901-(1) 9,000 13, /2 43-3/8 78 P704-EP( )1041-(1) 10,400 15, /2 51-3/8 104 P704-EP( )1321-(1) 13,200 17, /4 71-3/8 118 P704-EP( )1561-(1) 15,600 23, /4 71-3/8 128 P704-EP( )1751-(1) 17,500 26, /4 71-3/8 154 P704-EP( )2081-(1) 20,800 31, /4 91-3/8 162 P704-EP( )2601-(1) 26,000 39, /8 211 P704-EP( )3121-(1) 31,200 46, /8 236 P704-EP( )3501-(1) 35,000 52, /8 251 Models EPG and EPH are available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EPG and EPH is 120/1/60, optional voltage is 240/1/ Standard units are 6 FPI, for 4 FPI multiply capacity by

14 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EVA LOW VELOCITY WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Low velocity/dual coil construction. The fans draw air from the fan guards and discharge it on two evaporator coils, on each side of the unit. Air throw is 8 to 12 ft each side. Heavy gauge white-painted aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or Air Defrost plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EVA0601-(1) 6,000 9, /2 51-3/8 74 P704-EVA0801-(1) 8,000 12, /4 71-3/8 98 P704-EVA1001-(1) 10,000 15, /4 71-3/8 112 P704-EVA1201-(1) 12,000 18, /4 71-3/8 130 P704-EVA1501-(1) 15,000 22, /4 91-3/8 179 P704-EVA1801-(1) 18,000 27, /4 91-3/8 205 P704-EVA2401-(1) 24,000 36, /4 91-3/8 260 P704-EVA3001-(1) 30,000 45, /8 316 P704-EVA3601-(1) 36,000 54, /8 371 Model EVA is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EVA is 120/1/60, optional voltage is 240/1/ Standard units are 6 FPI, for 4 FPI multiply capacity by EVA/EVE P4387B P704-EVE LOW VELOCITY WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS FROM +26 F TO +34 F Low velocity/dual coil construction. The fans draw air from the fan guards and discharge it on two evaporator coils, on each side of the unit. Air throw is 8 to 12 ft each side. Heavy gauge white-painted aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Electric Defrost Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Series EVE units are provided with stainless steel flexible low watt density tubular heaters inserted within the evaporator, terminal block, defrost termination and fan delay thermostat for positive defrost and high efficiency. MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EVE0601-(2) 6,000 9, /2 51-3/8 80 P704-EVE0801-(2) 8,000 12, /4 71-3/8 107 P704-EVE1001-(2) 10,000 15, /4 71-3/8 121 P704-EVE1201-(2) 12,000 18, /4 71-3/8 141 P704-EVE1501-(2) 15,000 22, /4 91-3/8 194 P704-EVE1801-(2) 18,000 27, /4 91-3/8 220 P704-EVE2401-(2) 24,000 36, /4 91-3/8 280 P704-EVE3001-(2) 30,000 45, /8 340 P704-EVE3601-(2) 36,000 54, /8 400 Model EVE is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EVE is 240/1/60, optional voltage is 120/1/ Standard units are 6 FPI, for 4 FPI multiply capacity by

15 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EVG/EVH LOW VELOCITY WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS FROM +26 F to +34 F Low velocity/dual coil construction. The fans draw air from the fan guards and discharge it on two evaporator coils, on each side of the unit. Air throw is 8 to 12 ft each side. Heavy gauge white-painted aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. EVG Reverse cycle defrost with electric drain pan heaters. EVH Three pipe defrost pan heaters with electric drain pan heaters. Gas Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EV( )0601-(1) 6,000 9, /2 51-3/8 77 P704-EV( )0801-(1) 8,000 12, /4 71-3/8 102 P704-EV( )1001-(1) 10,000 15, /4 71-3/8 115 P704-EV( )1201-(1) 12,000 18, /4 71-3/8 134 P704-EV( )1501-(1) 15,000 22, /4 91-3/8 184 P704-EV( )1801-(1) 18,000 27, /4 91-3/8 210 P704-EV( )2401-(1) 24,000 36, /4 91-3/8 266 P704-EV( )3001-(1) 30,000 45, /8 324 P704-EV( )3601-(1) 36,000 54, /8 380 Models EVG and EVH are available in: 1 = 120/1/60 2 = 240/1/60 5 = /3/60 NOTES: 1. Standard voltage for EVG and EVH is 120/1/60, optional voltage is 240/1/ Standard units are 6 FPI, for 4 FPI multiply capacity by EVG/EVH P4387B 742

16 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EKA/EKE COMPACT WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F; (Electric Defrost) FOR COOLERS AND FREEZERS FROM 20 F TO +34 F Compact, high velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge, textured aluminum casings, polycarbonate fan guards and aluminum fans, pleated hardware for a light weight and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. EKE models are provided with a non-adjustable defrost termination and fan delay thermostat. All units feature low watt density tubular heaters. They are imbedded within the coil for positive defrost and high energy efficiency. This allows to reduce heat gain in coolers and freezers. They are available for /1/60, /3/60, 480/3/60 and 600/3/60. All units use proper quantity of heaters for even-phase loading. P4385 Air Defrost CAPACITY (MBH) UNIT SIZE (in.) SHIPPING MODEL WEIGHT 10 F TD 15 F TD Depth Height Width (Lbs) P704-EKA1400-( ) /2 21-1/ P704-EKA1600-( ) /2 21-1/ P704-EKA1800-( ) /2 21-1/ P704-EKA2100-( ) /2 21-1/ P704-EKA2400-( ) /2 21-1/ P704-EKA3000-( ) /2 21-1/ P704-EKA3600-( ) /2 21-1/ P704-EKA4200-( ) /2 21-1/ P704-EKA5400-( ) /2 21-1/ P704-EKA6300-( ) /2 21-1/ Model EKA is available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EKA, standard units are 8 FPI, for 4 FPI multiply capacity by Electric Defrost CAPACITY (MBH) SHIPPING MODEL UNIT SIZE FTD WEIGHT 20 F +20 F Depth Height Width (Lbs) P704-EKE1300-( ) /2 21-1/ P704-EKE1500-( ) /2 21-1/ P704-EKE1700-( ) /2 21-1/ P704-EKE2000-( ) /2 21-1/ P704-EKE2200-( ) /2 21-1/ P704-EKE2900-( ) /2 21-1/ P704-EKE3400-( ) /2 21-1/ P704-EKE4000-( ) /2 21-1/ P704-EKE5000-( ) /2 21-1/ P704-EKE6000-( ) /2 21-1/ Model EKE is available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EKE, standard units are 6 FPI, for 4 FPI multiply capacity by

17 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EKR/EKT COMPACT WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS AND FREEZERS FROM 20 F TO +34 F Compact, high velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge textured aluminum casings, polypropylene fan guards and aluminum fans, plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. EKR and EKT models are provided with a sealed nonadjustable fan delay thermostat, defrost termination thermostat and a hot gas defrost drain pan grid. Use EKR model for reverse cycle defrost or EKT model for three pipe defrost. All models are provided with terminal block(s) for easier field wiring. Terminals are clearly identified to match wiring diagram which is supplied with the unit. P4385 EKR Reverse cycle hot gas defrost with hot gas drain pan grid. EKT Three pipe hot gas defrost with hot gas drain pan grid. Hot Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EK( )1300-( ) /2 21-1/ P704-EK( )1500-( ) /2 21-1/ P704-EK( )1700-( ) /2 21-1/ P704-EK( )2000-( ) /2 21-1/ P704-EK( )2200-( ) /2 21-1/ P704-EK( )2900-( ) /2 21-1/ P704-EK( )3400-( ) /2 21-1/ P704-EK( )4000-( ) /2 21-1/ P704-EK( )5000-( ) /2 21-1/ P704-EK( )6000-( ) /2 21-1/ Models EKR and EKT are available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: Standard units are 6 FPI, for 4 FPI multiply capacity by

18 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EMA MEDIUM PROFILE WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge textured aluminum casings with PVC coated Air Defrost wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. MODEL CAPACITY (MBH) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EMA02150-( ) /4 210 P704-EMA02550-( ) /4 225 P704-EMA03000-( ) /4 245 P704-EMA04300-( ) /4 375 P704-EMA05100-( ) /4 400 P704-EMA06000-( ) /4 440 P704-EMA07650-( ) /4 595 P704-EMA09000-( ) /4 640 P704-EMA10200-( ) /4 785 P704-EMA12000-( ) /4 830 Model EMA is available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: Standard units are 6 FPI, for 4 FPI multiply capacity by EMA/EME P4378C P704-EME MEDIUM PROFILE WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throwis40to50ft. Heavy gauge textured aluminum casings with PVC coated wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Electric Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) 10 F TD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EME02000-( ) /4 255 P704-EME02400-( ) /4 265 P704-EME02900-( ) /4 295 P704-EME04000-( ) /4 455 P704-EME04800-( ) /4 480 P704-EME05800-( ) /4 540 P704-EME07200-( ) /4 720 P704-EME08700-( ) /4 772 P704-EME09600-( ) /4 930 P704-EME1600-( ) /4 989 Model EME is available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: Standard units are 6 FPI, for 4 FPI multiply capacity by Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Series EME units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. 745

19 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EMG/EMH/EMR/EMT MEDIUM PROFILE WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge textured aluminum casings with PVC coated wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Series EMG and EMH are provided with stainless steel low watt density drain pan heaters, terminal block, fan motor, heater contractors, fan and drain pan controls for positive defrost and high efficiency. EMG Reverse cycle hot gas defrost with electric drain pan heater. EMH Three pipe hot gas defrost with electric drain pan heater. EMR Reverse cycle hot gas defrost with hot gas drain pan grid. EMT Three pipe hot gas defrost with hot gas drain pan grid. Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EM( )02000-( ) /4 230 P704-EM( )02400-( ) /4 245 P704-EM( )02900-( ) /4 265 P704-EM( )04000-( ) /4 405 P704-EM( )04800-( ) /4 430 P704-EM( )05800-( ) /4 470 P704-EM( )07200-( ) /4 630 P704-EM( )08700-( ) /4 680 P704-EM( )09600-( ) /4 835 P704-EM( )11600-( ) /4 900 Models EMG, EMH, EMR and EMT are available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTES: 1. For EMT and EMR height add 5/8 inch. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by EMG/EMH/EMR/EMT P4378C 746

20 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EHA HIGH PROFILE WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 50 to 60 ft. Heavy gauge, galvanized steel casings with PVC coated wire Air Defrost fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. MODEL CAPACITY (MBH) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EHA04500-( ) / /4 480 P704-EHA05400-( ) / /4 500 P704-EHA06200-( ) / /4 545 P704-EHA09000-( ) / /4 805 P704-EHA10800-( ) / /4 850 P704-EHA12400-( ) / /4 940 P704-EHA16200-( ) / / P704-EHA18600-( ) / / P704-EHA24800-( ) / / Model EHA is available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EHA, standard units are 8 FPI, for 4 FPI multiply capacity by EHA/EHE P4378D P704-EHE HIGH PROFILE WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throwis60to70ft. Heavy gauge, galvanized steel casings with PVC coated wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Electric Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) 10 F TD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EHE04000-( ) / /4 560 P704-EHE04800-( ) / /4 590 P704-EHE06000-( ) / /4 640 P704-EHE08000-( ) / /4 960 P704-EHE09600-( ) / / P704-EHE12000-( ) / / P704-EHE14000-( ) / / P704-EHE18000-( ) / / P704-EHE24000-( ) / / Model EHE is available in: 2 = 240/1/60 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EHE, standard units are 6 FPI, for 4 FPI multiply capacity by Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EHE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. 747

21 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EHG/EHH/EHR/EHT HIGH PROFILE WALK-IN-UNIT COOLERS (Gas Defrost) High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 50 to 60 ft. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. SeriesEHGandEHHareprovidedwithstainlesssteellow watt density drain pan heaters, terminal block, fan motor, heater contractors, fan and drain pan controls for positive defrost and high efficiency. EHG Reverse cycle hot gas defrost with electric drain pan heater. EHH Three pipe hot gas defrost with electric drain pan heater. EHR Reverse cycle hot gas defrost with hot gas drain pan grid. EHT Three pipe hot gas defrost with hot gas drain pan grid. Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EH( )04000-( ) / /4 500 P704-EH( )04800-( ) / /4 520 P704-EH( )06000-( ) / /4 565 P704-EH( )08000-( ) / /4 835 P704-EH( )09600-( ) / /4 880 P704-EH( )12000-( ) / /4 970 P704-EH( )14000-( ) / / P704-EH( )18000-( ) / / P704-EH( )24000-( ) / / Models EHG, EHH, EHR and EHT are available in: 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTES: 1. For EHR and EHT height add 5/8 inch. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by EHG/EHH/EHR/EHT P4378D 748

22 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EIE/EIG/EIH/EIR/EIT INDUSTRIAL WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +0 F; (Hot Gas Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +0 F Extra-high velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 60 to 70 ft. Heavy gauge, galvanized steel with PVC coated wire fan guards and aluminum fans and plated hardware for a heavy duty and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EIE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. Series EIG and EIH are provided with stainless steel low watt density drain pan heaters, terminal block, fan motor, heater contactors, fan and drain pan controls for positive defrost and high efficiency. EIE EIG EIH EIR EIT Electric Defrost Reverse cycle hot gas defrost with electronic drain pan. Three pipe hot gas defrost with electronic drain pan. Reverse cycle hot gas defrost with hot gas drain pan. Three pipe defrost with hot gas drain pan. Electric Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EIE04400-( ) / /4 560 P704-EIE05400-( ) / /4 590 P704-EIE06800-( ) / /4 640 P704-EIE08800-( ) / /4 960 P704-EIE10800-( ) / / P704-EIE13600-( ) / / P704-EIE16200-( ) / / P704-EIE20400-( ) / / P704-EIE27200-( ) / / Hot Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EI( )04400-( ) / /4 500 P704-EI( )05400-( ) / /4 520 P704-EI( )06800-( ) / /4 565 P704-EI( )08800-( ) / /4 835 P704-EI( )10800-( ) / /4 880 P704-EI( )13600-( ) / /4 970 P704-EI( )16200-( ) / / P704-EI( )20400-( ) / / P704-EI( )27200-( ) / / Models EIE, EIG, EIH, EIR and EIT are available in: 5 = /3/60 8 = 600/3/60 9 = 480/3/60 NOTES: 1. For EIT and EIR height add 5/8 inch. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by EIE/EIG/EIH/EIR/EIT P4378D 749

23 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EBE BLAST FREEZER UNIT COOLERS (Electric Defrost) FOR FREEZERS FROM 40 F TO +0 F Extra-high velocity/floor mounted units. Designed for fast freezing in tunnel. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. The blast freezer series EB casings are heavy gauge, galvanized steel with PVC coated wire fan guards, aluminum fans and plated hardware for a heavy duty and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EBE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. P4387 Electric Defrost CAPACITY 10 F TD MODEL UNIT SIZE (in.) SHIPPING 40 F SST AIR STATIC WEIGHT (Lbs) Depth Height Width P704-EBE03420-( ) P704-EBE04530-( ) P704-EBE05460-( ) P704-EBE06840-( ) P704-EBE09060-( ) P704-EBE10910-( ) P704-EBE13600-( ) P704-EBE16370-( ) P704-EBE18610-( ) P704-EBE22210-( ) P704-EBE17160-( ) P704-EBE20980-( ) P704-EBE25730-( ) P704-EBE31460-( ) P704-EBE35400-( ) P704-EBE42720-( ) Model EBE is available in: 5 = /3/60 8 = 600/3/60 9 = 480/3/60 750

24 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EBR/EBT BLAST FREEZER UNIT COOLERS (Gas Defrost) FOR FREEZERS FROM 40 F TO +0 F Extra-high velocity/floor mounted units. Designed for fast freezing in tunnel. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. The blast freezer series EB casings are heavy gauge, galvanized steel with PVC coated wire fan guards, aluminum fans and plated hardware for a heavy duty and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EBR and EBT are provided with hot gas drain pan grid, adjustable fan delay thermostat and defrost termination thermostat. EBR Reverse cycle hot gas defrost with hot gas drain pan. EBT Three pipe hot gas defrost with hot gas drain pan. P4387 Gas Defrost CAPACITY 10 F TD MODEL UNIT SIZE (in.) SHIPPING 40 F SST AIR STATIC WEIGHT (Lbs) Depth Height Width P704-EB( )03420-( ) P704-EB( )04530-( ) P704-EB( )05460-( ) P704-EB( )06840-( ) P704-EB( )09060-( ) P704-EB( )10910-( ) P704-EB( )13600-( ) P704-EB( )16370-( ) P704-EB( )18610-( ) P704-EB( )22210-( ) P704-EB( )17160-( ) P704-EB( )20980-( ) P704-EB( )25730-( ) P704-EB( )31460-( ) P704-EB( )35400-( ) P704-EB( )42720-( ) Models EBR and EBT are available in: 5 = /3/60 8 = 600/3/60 9 = 480/3/60 751

25 TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EFE/EFR/EFT FREE-STANDING BLAST FREEZER (Electric Defrost) AND (Gas Defrost) Extra-high velocity/floor mounted units. Designed for fast freezing in tunnel. The field supplied fans can be mounted for air draw or blow through installation. The blast freezer series EF casings are heavy gauge, galvanized steel for a heavy duty and corrosion free assembly. Series EFE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. EFR/EFT series are provided with a hot gas drain pan, adjustable fan. EFR EFT Reverse cycle hot gas defrost with hot gas drain pan. Three pipe hot gas defrost with hot gas drain pan. P4388 Electric Defrost CAPACITY 10 F TD 40 F SST MODEL UNIT SIZE (in.) SHIPPING FPM WEIGHT (Lbs) Depth Height Width P704-EFE03420-( ) P704-EFE04530-( ) P704-EFE05460-( ) P704-EFE06840-( ) P704-EFE09060-( ) P704-EFE10910-( ) P704-EFE13600-( ) P704-EFE16370-( ) P704-EFE18610-( ) P704-EFE22210-( ) P704-EFE17160-( ) P704-EFE20980-( ) P704-EFE25730-( ) P704-EFE31460-( ) P704-EFE35400-( ) P704-EFE42720-( ) Gas Defrost CAPACITY 10 F TD 40 F SST MODEL UNIT SIZE (in.) SHIPPING FPM WEIGHT (Lbs) Depth Height Width P704-EF(*)03420-( ) P704-EF(*)04530-( ) P704-EF(*)05460-( ) P704-EF(*)06840-( ) P704-EF(*)09060-( ) P704-EF(*)10910-( ) P704-EF(*)13600-( ) P704-EF(*)16370-( ) P704-EF(*)18610-( ) P704-EF(*)22210-( ) P704-EF(*)17160-( ) P704-EF(*)20980-( ) P704-EF(*)25730-( ) P704-EF(*)31460-( ) P704-EF(*)35400-( ) P704-EF(*)42720-( ) *(R) or (T). Models EFE, EFR AND EFT are available in: 5 = /3/60 8 = 600/3/60 752

26 TOTALINE REFRIGERATION CONDENSING UNITS P705 INDOOR & OUTDOOR REFRIGERATION CONDENSING UNITS Totaline s outdoor and indoor refrigeration condensing units are available in several models and sizes for various applications. Condensing units are air cooled or water cooled and are available with semi-hermetic, hermetic, or scroll compressors. A remote condenser unit is also available. Sizes are available from 3/4 HP up to 80 HP. STANDARD FEATURES: Painted outdoor galvanized protective cabinet (outdoor units up to 22 HP). Outdoor galvanized protective cabinet (outdoor units above 25 HP). Aluminum fin and copper tube condenser. True subcooling circuit integrated in the condenser coil. Fixed head pressure control flooding valve (outdoor units up to 22 HP). Adjustable head pressure control flooding valves (outdoor units above 25 HP). Crankcase heater (outdoor units). Rigid mounted hermetic and scroll compressors. Spring mounted semi-hermetic compressor with vibrasorbers. Tamper-proof adjustable high pressure switch. Tamper-proof adjustable low pressure switch (hermetic and scroll). Units available for R-22, R-404A, R-507 and -134a. P4389A P4389B FACTORY-INSTALLED OPTIONS: Low ambient kit includes: heated and insulated receiver. Liquid line kit: liquid drier (standard or replaceable), sight glass/moisture indicator, liquid line solenoid valve (shipped loose). Suction filter (standard or replaceable). Adjustable high and low pressure switch with flexible hoses. Suction accumulator. Oil separator (ICH units). Oil separator including check valve, insulation and heater (OCH units). Non-fused disconnect switch. Fused disconnect switch. Hot gas defrost kit. Electric defrost timer (single phase). Electric defrost kit includes timer, heater, fan contactors and lockout relay (3 phase). Air defrost timer. Fan speed control kit (dual fan condensing units only). 753