SNM / SNM-V. Close - Coupled Centrifugal Pumps ATEX SNM EN
|
|
|
- Joel Lang
- 5 years ago
- Views:
Transcription
1 EN ISO 9905 SN / SNV Close Coupled Centrifugal umps ATEX SN EN
2 General Information SN / SNV Liquids Handled SN / SNV type pumps are suitable for nonaggresive, clean or slightly contaminated liquids with low viscosity. Technical Data Design Features Suction Flange Discharge Flange Capacity Head Speed otor Rating Operating Temperature Casing ressure (max) Shaft Sealing : DN DN 200 mm : DN DN 0 mm : up to 500 m³/h : up to 95 m : up to 2900 rpm + : up to 55 kw : 10 C up to + C * : 10 bar (16 bar) * : echanical Seal Closecoupled, volute casing, single stage, end suction centrifugal pump with closed impeller. ain dimensions of casing according to EN 733. Suction and discharge flanges are conforming to ISO 052 / N16. SN / SN V pumps are direct coupled with NOR electric motors comply with the VDI standards and IEC frame sizes. Due to back pullout design the motor, seal cover (max: Suction ressure + Shut off Head) (+) lease contact our company for pumps with motor power over 55 kw. (*) The material of pumps differs according to the type of pumped liquid, operating temperature and pressure. Contact our company for detailed information. and impeller can be dismantled without removing the volute casing from the pipe system. SN / SN V type closecoupled pumps are lighter and smaller comparing to the norm centrifugal pumps of same hydraulic specifications. Applications Water supply, irrigation and sprinkler Water treatment Air conditioning Cooling plants Food and beverage processing aper and cellulose industries Chemical and petrochemical industries Fire fighting ower plants Shaft Sealing Single mechanical seal, flushed by pumped liquid, uncooled and unbalanced. Rotation Direction of rotation is clockwise viewed from driver. ump Designation SN 250 ump Type Discharge Nozzle (DNmm) Nominal Impeller Diameter (mm)
3 Field Chart SN / SNV rpm Capacity (m³/h) rpm Capacity (m³/h)
4 Sectional Drawings SN / SNV Horizontal Installation *020 *
5 * SN / SNV Sectional Drawings arts List Vertical Installation
6 SN / SNV Lm W A De Db e m1 m2 S n2 n1 L De m2 m1 S A Db W L Lm n2 n1 Sa h2 KxK B Db h3 De Form Form ,1 1,5 2, ,5 5, , ,5 4 5, ,5 18,5 90S 90L L L S S S S S 90L L S S S S L 200L L S S IEC De Db A W Lm L H h1 h2 e m1 m2 n1 n2 S (kg) h3 h4 h5 La KxK B Sa (kg) kw Technical Data U TYE OTOR SN HORIZONTAL INSTALLATION DIENSIONS SNV VERTICAL INST. DIENSIONSWeight Weight 2900 rpm (2 pole otor) SNV Vertical Installation SN Horizontal Installation
7 Technical data Data SN / SNV 2900 rpm (2 pole otor) U TYE OTOR SN HORIZONTAL INSTALLATION DIENSIONS Weight SNV VERTICAL INST. DIENSIONSWeight kw IEC De Db A W Lm L H h1 h2 e m1 m2 n1 n2 S (kg) h3 h4 h5 La KxK B Sa (kg) 5,5 S S ,5 L ,5 L ,5 S S C ,5 L ,5 L L L L ,5 L L L L L L L L rpm (4 pole otor) , , , , , , , ,1 90S ,1 90S ,5 90L ,2 L L , , , , , ,1 90S , ,1 90S ,5 90L ,2 L
8 Technical Data SN / SNV 50 rpm (4 pole otor) U TYE OTOR SN HORIZONTAL INSTALLATION DIENSIONS Weight SNV VERTICAL INST. DIENSIONSWeight kw IEC De Db A W Lm L H h1 h2 e m1 m2 n1 n2 S (kg) h3 h4 h5 La KxK B Sa (kg) 1,1 90S ,5 90L ,2 L L ,2 L L ,5 S , , , , ,1 90S ,5 90L ,1 90S ,5 90L ,2 L L ,2 L L ,5 S ,5 S , , ,1 90S ,1 90S ,5 90L ,2 L ,5 90L ,2 L L L ,5 S ,5 S L L , L L ,5 90L ,2 L L L ,5 S ,5 S L , , L L S L ,
9 Technical Data SN / SNV Form 50 rpm (4 pole otor) U TYE OTOR SN HORIZONTAL INSTALLATION DIENSIONS Weight SNV VERTICAL INST. DIENSIONS Weight Flange Dimensions De / Db Suction & Discharge (N 16) Df k De/Db bf s
10 Technical Data SN / SNV aterial Options arts List DIN / EN Standard manufacturing Optional aterial Equivalents Description DIN 107 ENDIN AST Installation Arrangements SN / SNV umps can be installed in different positions In horizontal position on a base plate. Between two perpendicular pipes in horizontal or vertical position. The axis of motor below the horizontal line is not admissible. In vertical position by means of a special suction elbow with foot.
11 Right reserved to change without notice. No responsibility is accepted because of printing errors.
abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: up to 3600 rpm depending of the pump size and material execution Medium temperature: max. 110
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
Close-coupled pumps Series ES04
Close-coupled pumps Series ES04 www.andritz.com/pumps General Description / Application Pumps of series ES04 are extremely compact units which require very little space. They are particularly suitable
Stainless Steel Centrifugal Pump Type 3 SERIES
PUMP Stainless Steel Centrifugal Pump Type APPLICATIONS Water supply to civil, agricultural and industrial plants Pressure boosting Fire-fighting, heating systems and air-conditioning Moving industrial
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
The Modular System SIHI ISOchem
The Modular System SIHI ISOchem Description Standard chemical pumps of the SIHI ISOchem range are horizontal single-stage volute casing pumps with dimensions to ISO 2858 / EN 22858. They meet the technical
CENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
Bearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
ISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
Norm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
JE1, JE1 4 SERIES CONTENTS: Stainless Steel Construction Closed impeller Flow: 8 to 95 GPM Head: to 144 ft. Range of HP: to 3 HP
JE, JE SERIES Stainless Steel Construction Closed impeller Flow: 8 to 9 GP Head: to ft. Range of HP: to 3 HP Applications: Residential booster system Irrigation Utility NSF / Annex G Certified* Certified
High-pressure In-line Pump. Movitec. 50 Hz. Type Series
High-pressure In-line Pump 50 Hz Type Series Operating data A Characteristic Value low rate Q [m 3 /h] 8,6 Q [l/s] 2,4 Head H [m] 1 luid temperature T [ C] -15 to +120 Operating pressure p [bar] 1) B Characteristic
High-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
Combi Modular System. Standardised centrifugal pumps EN 733 EN ISO 5199 API 610
Combi Modular System Standardised centrifugal pumps EN 733 EN 22858 ISO 5199 API 610 SPX Johnson Pump brand water, chemical and petrochemical standardised pumps represent a range of horizontal centrifugal
Prolac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications
Prolac MSHCP I Application Due to the choice of aterials and its design, PROLAC HCP is appropriate for applications requiring a high level of hygiene, it offers gentle handling of the product and resistance
Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
KSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709
Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.
Volute Casing Centrifugal Pumps of Inline Design Series NI
Volute Casing Centrifugal Pumps of Inline Design Series NI Application For pumping pure water, industrial water, sea water, condensates, oils, brines, lyes and hot water. The fluids to be pumped must not
SIHI SuperNova. Volute casing pumps. Type ZLIC TECHNICAL DATA. 0B, 0C, 4B max. 120 C Casing pressure: PN 16 / PN 10 1)
Volute casing pumps SIHI SuperNova Type ZLIC 040160... 200 TECHNICAL DATA Output: Head: Speed: Material: Temperature: max. 330 m³/h max. 60 m max. 3600 rpm grey cast iron: 0B, 0C material design: 0B, 0C,
Data sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
WTX. Complete Stainless Steel Monoblock Process Pumps
Complete Stainless Steel Monoblock Process Pumps FEATURES, stainless steel, horizontal shaft, non-self-priming, single stage centrifugal volute pumps are made by advanced techniques such as pressing welding
High-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
Company name: Created by: Phone:
Position Qty. Description 1 TP 8-/2 A-F-A-BQQE Date: 29/1/18 Product No.: 9618724 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of
INDUSTRY APPLICATION. S -pumps are used in: Industry Waste treatment Environment protection Construction industry Civil engineering
INDUSTRY APPLICATION Self-priming centrifugal pumps of type S are used for pumping clean and contaminated liquids containing solids. The special design makes them suitable also for abrasive liquids. S
TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
Company name: Created by: Phone:
Position Qty. Description 1 TP -42/2 A-F-A-BQQE Date: 26/1/218 Product No.: 9874287 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is
Waterflo WF Series Back pull-out End Suction Centrifugal pump
08 Waterflo WF AKAY INDUSTRIES AKAY WATERFLO WF SERIES Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN 24255 Stuffing Box Standard
XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
Data sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
VERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
EUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)
ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump
Vogel - Inline Pumps. Design LR / LMR & LRZ / LMZ, LER & LEZ
Vogel - Inline Pumps Design LR / LMR & LRZ / LMZ, LER & LEZ 1 Performance: Capacity up to 350 m 3 /h (1540 USgpm) Head up to 85 m (280 feet) Speed up to 2950 min -1 (2950 rpm) Pump sizes: DN 40 up to DN
Volute Casing Centrifugal Pumps PN 16 for Heat Transfer Oils up to 350 C Series NTT Pump dimensions acc. to DIN EN 733 with additional sizes
Volute Casing Centrifugal Pumps PN 16 for Heat Transfer Oils up to 350 C Series NTT Pump dimensions acc. to DIN EN 733 with additional sizes Application For handling organic heat-transfer oils in heat
316 Stainless Steel Submersible Pumps 8" 10" 12"
316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping
CDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps
odel Contents Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions 7/-3/HP 7/3- /HP 7/-HP /-HP /3- /HP 3 3 /-3HP /- /HP /3-3HP /-3HP *Note: NSF/ANSI Annex G listed Certified
Stainless Steel Vertical Multistage Pump CONTENTS
, EVMUG/L - V ertic ca l Multistage s D ata Book 6Hz / EVMU(G)(L) CONTENTS SECTION PAGE FEATURES 2 TYPICAL APPLICATIONS 3 MODEL DESIGNATION 4 PRODUCT SPECIFICATIONS 1 2 5 EVMU(G)(L)32 - EVMU(G)(L)64 6
Side Channel Pumps Self-priming, segmental type
Side Channel Pumps Self-priming, segmental type AKH 1101 6103 Technical data Capacity: from 0,2 up to 35 m³/h Head: from 6 up to 144 m Speed: 1450 rpm (max. 1800 rpm) Temperature: max. 120 C Casing pressure:
HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
Standard SO according to DIN
Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.
N, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
Volute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive. Series CNH-M
Volute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive Series CNH-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
Data sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
SIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
SMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
RSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
General. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue
Product Catalogue ETA C and D General The well-known ETA-pump on the bearing bracket C and D is constructed in accordance with DIN 24 255 standard and completes the performance range up to max. 100 m3/hr
HEAVY DUTY CONSTRUCTION
50Hz SATURN Fiberglass reinforced pumps ZMS ZGS HEAVY DUTY CONSTRUCTION 2 SATURN Argal fiberglass reinforced pumps range ARGAL SATURN chemical pump series consists of single-stage, horizontal axis centrifuges
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
Jansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
General Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
Volute pumps for heat carrier oils up to 350 C. SIHI SuperNova ZTND TECHNICAL DATA. Temperature: max. 350 C Casing pressure: PN 16
Volute pumps for heat carrier oils up to 350 C SIHI SuperNova ZTND 032-125... 200-500 TECHNICAL DATA Output: Delivery head: Speed: max. 0 m³/h max. 95 m max. 3600 rpm Temperature: max. 350 C Casing pressure:
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP. Chemical Centrifugal Pump Acc. to DIN EN ISO 2858 & DIN EN ISO 5199
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP Chemical Centrifugal Pump Acc. to DIN EN ISO 288 & DIN EN ISO 1 For more than years the name Ruhrpumpen has been synonymous worldwide with innovation
EJseries. Self-Priming Centrifugal Pumps
EJseries Self-Priming Centrifugal Pumps T w w w. e u r o f l o p u m ps. c o m EJseries - Coding System Eg. EJS -11 XX XX XX EJT - XXX XX-XXX XX XXXX XXXX Series EJS = Shaft (bare) pumps EJT = Large Flow
Volute Casing Centrifugal Pumps of the Block-Type Construction with Magnetic Coupling
Volute Casing Centrifugal Pumps of the BlockType Construction with Magnetic Coupling ALLMAG Series CMA ATEX 0 a Application For handling toxic, volatile, explosive or other fluids harmful to the environment
SM / SMI N N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SM / SMI Heavy Duty, Axial Split Casing, Multi-Stage, Between Bearings, Horizontal Centrifugal Pipeline Pump, API 610 latest Edition SM / SMI For more
Data sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
FreFlow. Self-priming centrifugal pumps
FreFlow Self-priming centrifugal pumps SPX FLOW, Inc. has many years experience in designing, manufacturing and maintaining selfpriming centrifugal pumps for contaminated liquids. On the basis of this
KWP non-clogging centrifugal pump. Designation
Type series booklet.5/80 G KWP KWP nonclogging centrifugal pump Automation products available: PumpEpert Hyamaster hyatronic Fields of Application For handling all kinds of pulps not liable to plait, as
ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS
ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS Conforms to ISO 2858 Conforms to ISO 5199 Optimized for capacity Efficiency as per Hydraulic Institute & Europump Norms Many product variants -
PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.
SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,
Data sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
NM, NMS 60 Hz NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions.
, S z lose oupled entrifugal ups Materials oponents, S, S up casing ast iron ronze Lantern bracket asing cover for S GJL N Gu Sn N Lantern bracket S ast iron GJL N Ipeller ast iron ronze GJL N Gu Sn N
250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
Gerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
Multistage Pumps. Vogel Series P, PVa, MP 300
Multistage Pumps Vogel Series P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series
Side channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
Volute pumps for hot water up to 207 C
Volute pumps for hot water up to 207 C SIHI SuperNova ZDND 032160... 250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 Temperature: max. 207 C Casing pressure: PN 25 Shaft
Euro-HYGIA. Euro-HYGIA s. Construction. Technical data. Applications. Materials. Sanitary pumps 50 Hz. Euro-HYGIA I and II. Food and beverage industry
Euro-HYGIA Euro-HYGIA s Construction Euro-HYGIA pumps are single-stage, end-suction centrifugal pumps designed to meet the hygienic requirements of sterile process technology. The pumps are CIP and SIP
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP. Heavy Duty, Single Stage ANSI Chemical Process Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP For more than 0 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
Company name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017
Position Qty. Description 1 CM5-4 S-R-I-E-AQQE Product No.: 98482185 Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The pump
RDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
CATALOGUE CARD SCREW PUMPS
HYDROSTER Ltd. Na Ostrowiu Str. 1 80-958 Gda sk hone: (48 58) 307 12 90, fax (48 58) 307 12 92, e-mail: market@hydroster.com.pl CATALOGUE CARD SCREW UMS Screw pump AB KKA-11130/04.99 Catalogue card Screw
SIL Inline Single Stage Centrifugal Pumps
SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also
Screw Pumps Series SPF
Screw umps Application For the delivery of fuel oils, lube oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack the pump materials chemically.
Volute pumps for heat carrier oils up to 350 C SIHI SuperNova ZTND 032-125... -500 TECHNICAL DATA Output: max. 0 m³/h Delivery head: max. 95 m Speed: max. 3600 rpm Temperature: max. 350 C Casing pressure:
ILN, ILNC. In Line vertical pumps. ILN single suction ILN double suction ILNC. 1. Fields of Application. 3. Design. 4. Designation. 2.
Type series booklet CTI-2600/04 [04-2017] ILN, ILNC In Line vertical pumps ILN single suction ILN double suction ILNC sizes 65/ to 250/... sizes 300/ all sizes 1. Fields of Application Suitable for a wide
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.).
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
TS series STERLING PUMPS. Submersible Turbine Pumps.
TS series STERLING UMS Submersible Turbine umps www.sterlingpumps.com.au STERLING UMS TS series 5 through to 12 Submersible turbine pumps The Sterling TS series of submersible pumps are abroad family of
Volute pumps for hot water
Volute pumps for hot water ZLI 25-125... 80-200 TECHNICAL DATA output: max. 140 m³/h delivery head: max. 60 m speed: max. 3600 1/min material: spheroidal graphite iron temperature: max. 150 C casing pressure:
APIFLO-M series Series
APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25
RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps
VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet)
SCE Heavy Duty, Single Stage, Overhung, API 610 Process Pump (OH2)
SCE Heavy Duty, Single Stage, Overhung, API 610 Process Pump (OH2) Ruhrpumpen is an innovative and efficient centrifugal pump technology company and offers operators of Pump Systems, a wide range of quality
CM15-1 A-R-I-V-AQQV C-A-A-N
GRUNDFOS DATA BOOKLET CM15-1 A-R-I-V-AQQV C-A-A-N Grundfos Pump 97515 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97515/cm15-1-a-r-i-v-aqqv.html