Waterflo WF Series Back pull-out End Suction Centrifugal pump
|
|
- Hubert Hampton
- 5 years ago
- Views:
Transcription
1 08
2 Waterflo WF AKAY INDUSTRIES AKAY WATERFLO WF SERIES Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN Stuffing Box Standard stuffing box includes gland packing with a lantern ring incorporating high pressure internal flushing. External flush can be fitted and pump can be supplied with a mechanical seal. Conversion from packed box to mechanical seal and back to packing is easy. All pumps that can operate at 2 pole speed have a close tolerance stuffing box bush fitted. Bearing housing Rugged iron construction with only three bearing housings covering complete range of pumps which gives many common inter changeable parts. 08 bearings and for this arrangement the housing includes an oil level sight glass and Bearings Bearings on sizes are grease lubricated sealed for life. 4 sizes have oil lubricated vent. Support Foot Each pump has a remove-able support foot fitted at drive and for greater rigidity. Shaft Sleeve Fully mechanical hook type shaft sleeve prevents shaft damage under the gland packing which substantially reduces maintenance costs. Wear Rings Replaceable wear-rings are fitted as standard to all casings and also to back covers on lager pumps which reduces maintenance time and costs.
3 Waterflo WF AKAY INDUSTRIES Casing The cast iron volute casing is of robust design with integrally cast feed, vertical top centreline discharge with axial suction incorporating cast inlet vane to give best flow to impeller eye. Impeller Double shrouded type is hydraulically balanced and positively driven by shaft key and axially locked sleeve and impeller nut. Shaft A domed type locking nut seals the stainless steel shaft at the impeller. Only 4 shafts are required to cover whole 7 sizes and reduces inventory to a minimum. 08 Back pull out feature This design feature allows the complete rotating element to be removed for servicing without disconnecting pipework. If a spacer coupling is fitted than motor does not have to be moved. On re-assembly of pump coupling re-alignment problems are completely eliminated. Applications Air Conditioning Heating and Ventilating Refrigeration Fire Protection Plumbing Food and Drink Manufacture Circulating Water Pressure Boosting Transfer Water Treatment and supply Irrigation Drainage Factory Pumping Process Industry Petroleum Products General Industry Material of construction Bonze fitted Cast iron All iron Casing Cast iron Cast iron Cast iron Impeller Bronze Cast iron Cast iron Wear Ring Cast iron Cast iron Cast iron Shaft Stainless steel Stainless steel Stainless steel Shaft Nut Stainless steel Stainless steel Cast iron Shaft Sleeve Stainless steel Stainless steel Stainless steel Lantern Ring Cast iron Cast iron Cast iron Gland Cast iron Cast iron Cast iron Materials specification Material Nearest Australian Cast iron AS 180/T0 BS 1452 GR 2 Bronze AS1565/86B BS 1400 LG2 Stainless Steel AS 1444 GR 4 Equivalent British BS970 4/S7 Standard American ASTM A48 Class 0 ASTM B 145 CDA 86 DIN DIN 1691 GG DIN 1705 AISI 4 DIN 17440
4 Structural drawing of AKAY INDUSTRIES 08
5 Shaft Model Diameter Suction Discharge Pump dimentions Foot Dimensions Shaft End Coupling Net A F H 1 B M 1 M2 N 1 N 2 N H Ồ1 Ồ2 W X D L Key Weight kg x x x x x x h 45 h x x x x x x =2 h 45 h x x x x x x h 45 h x x x x x h 45 h x x x x x h 45 h x x h 45 h x x x x x x x x x x x x x x FLANGE DATA Dimensions in mm Brach Flange Drilling Raised face Bolting Size D B D1 F No D2 K M M M M M M M M M
6 Selection Chart AKAY INDUSTRIES n=2900rpm H(m) /26 2/16 Selection charts of WF stage centrifugal pump 40/16 2/1 40/ /2H 40/26 2/ 40/ 50/ 50/16 50/1 50/2H 50/ / /26 65/1 65/16 65/2H 80/16 80/2H 80/26 80/ /26 / /16 /2H 125/ Q [IM.gpm] Q[US.gpm] Q[m /h] Q[l/s] H(ft) n=1450rpm H(m) /26 2/16 2/ Q [IM.gpm] Q[US.gpm] /40 150/ /40 0/40 250/40 /2 150/2 80/2 /2 250/2 80 0/2 H(ft) /2 40/1 40/26 40/ 2/ 50/ Selection charts of WF stage centrifugal pump 40/16 50/16 50/2 50/1 50/26 65/26 65/ 65/16 65/1 80/ /2 80/ /26 80/ /16 /26 / 125/26 125/ 150/26 150/ Q[m /h] Q[l/s]
7 Selection Chart AKAY INDUSTRIES n=500rpm H(m) /26 2/ 2/16 2/ Selection charts of WF single stage centrifugal pump 40/ 40/16 40/ / / 50/16 50/ / / /26 65/1 65/ /16 80/ / / /16 / / Q [IM.gpm] Q[US.gpm] Q[m /h] Q[l/s] H(ft) n=1750rpm Selection charts of WF single stage centrifugal pump /40 125/ /2 50/ / /26 H(m) 0/26 50/26 65/26 80/26 /26 125/26 150/ / 40/ 50/ / 150/ / 80/ / /16 40/16 125/ /16 80/ / /1 40/1 50/1 65/ Q [IM.gpm] Q[US.gpm] / /40 0/40 250/ /2 150/2 80/2 125/2 250/ /2 86 H(ft) Q[m /h] Q[l/s]
8 Akay Industries B.V. Headquarters T. +1 (0) Seggelant Noord 11 F. +1 (0) MG Vierpolders E. The Netherlands W.
PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationNormpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationTKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationHYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationKIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS. Description. Cut-sectional View. Shaft :
KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS Description Range : Delivery size up to 150 mm Capacity up to 550 m 3 /hr Head up to 100 metres Applications : Suitable for Circulation of Water in Industries,
More informationabcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationEnd suction back pull-out pumps for general industry, mining, rural and building services
End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive
More informationCombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 5199 and ISO 858 / EN 858 (DIN 456) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal
More informationCombiNorm. Centrifugal pump according to EN 733 (DIN 24255)
CombiNorm Centrifugal pump according to EN 733 (DIN 242) The SPX FLOW Johnson Pump Combi system is a modular programme of single stage centrifugal pumps with a high degree of interchangeability of parts
More informationCasing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
More informationZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationGeneral. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue
Product Catalogue ETA C and D General The well-known ETA-pump on the bearing bracket C and D is constructed in accordance with DIN 24 255 standard and completes the performance range up to max. 100 m3/hr
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationSingle-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating
OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to
More informationStandard SO according to DIN
Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.
More informationAxial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.
More informationDesign Characteristics. Aplicaciones
Design Characteristics Single stage centrifugal. Casing axially split. Double entry impeller. Bearings on both sides of impeller. Suction and discharge branches located in lower casing. Características
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationData sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
More informationmultiflow Multistage Heavy Duty Axially
2 multiflow Multistage Heavy Duty Axially Multistage Heavy Duty Axially Split Casing Centrifugal Pump PERFORMANCE RANGE Capacity Up to 6000m 3 /h Up to 2600gpm Heads Up to 1000m Up to 32810 feet Temperatures
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationVertical multistage centrifugal pumps in ring-section design
Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design PUMP DESIGN Multistage centrifugal pumps in ring-section design, radially split,
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationHORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
More informationFE Frame-Mounted End Suction Pumps. Leading The Flow. TACO.
FE Frame-Mounted End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. FE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationSIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationWTX. Complete Stainless Steel Monoblock Process Pumps
Complete Stainless Steel Monoblock Process Pumps FEATURES, stainless steel, horizontal shaft, non-self-priming, single stage centrifugal volute pumps are made by advanced techniques such as pressing welding
More informationKIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation
More informationSMD axially split casing, double suction pump
SMD axially split casing, double suction pump Main applications SMD single stage, double suction, axial split casing pumps are designed to meet the needs of the water market for a wide range of raw, clean,
More informationHeat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet
Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,
More informationSJP Vertical Propeller Pumps
Sulzer Pumps SJP Vertical Propeller Pumps The Heart of Your Process Sulzer Pumps Sulzer Pumps is a world leader in reliable products and innovative pumping solutions. Our advanced research and development,
More informationPUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.
SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,
More informationAjax ISO. Centrifugal Pump ISO Application Application. Designation Designation. Operating Data - 50 Hz. Design. Type Series Booklet
Type Series Booklet Ajax ISO Centrifugal Pump ISO 288 Application Application The KSB Ajax ISO centrifugal pump is suitable for handling water and similar liquids mainly used in the following The KSB Ajax
More informationHigh-pressure In-line Pump. Movitec. 50 Hz. Type Series
High-pressure In-line Pump 50 Hz Type Series Operating data A Characteristic Value low rate Q [m 3 /h] 8,6 Q [l/s] 2,4 Head H [m] 1 luid temperature T [ C] -15 to +120 Operating pressure p [bar] 1) B Characteristic
More informationBearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationCE Close-Coupled End Suction Pumps. Leading The Flow. TACO.
CE Close-Coupled End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. CE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationHORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
More informationGENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range :
Fluid Technology from Holland GENERAL DIMENSIONS OF SMF PUMPS Features : Closed or Semi-open Impeller Different Orientation of Delivery Nozzle. Vertical Execution The SMF series are single-stage centrifugal
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationRDLO / RDLO V Type Series Booklet
RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More informationRDLO / RDLO V Type Series Booklet
RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More informationJansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
More informationAxially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationSide channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH
Side channel pumps ADH/CDH 0801... 2504 AEH 0805... 0808 TECHNICAL DATA Capacity: Head: Speed: max. 7,2 m³/h max. 400 m max. 3000 rpm Temperature: max. 120 C Casing pressure: Shaft sealing: PN 25 for ADH/CDH
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationVolute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
More informationPumps Motors ISO 9001 Company
SERIES DATA BOOKLET EndSuction Centrifugal Monoblock Pumps 6 Hz Pumps Motors ISO 91 Company Pumping Solution Contents Endsuction centrifugal monoblock pumps Product data Introduction Applications Features
More informationRDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
More informationMBN Medium Pressure Stage Casing Pump
MBN Medium Pressure Stage Casing Pump Main Applications The MBN pumps are horizontal, radially split, ring section pumps with a modular design. They are suitable for pumping clean or slightly polluted,
More information1100 Series Multi-Stage Vertical Turbine Pumps
1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationKSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709
Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationTHOMAS DREDGE PUMP RANGES
THOMAS DREDGE PUMP RANGES Pump Technologies Thomas Dredge The Metso Thomas Dredge Pumps are designed for hydraulic dredging and mining applications. These rugged pumps feature extra heavy metal sections
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP. Heavy Duty, Single Stage ANSI Chemical Process Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP For more than 0 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationHydro MPC-E 2CRIE L GNL
GRUNDFOS DATA BOOKLET Hydro MPC-E 2CRIE15-4 33L GNL Grundfos Pump 98875972 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/98875972/tp-1-3-4-ai-f-a-bqqe.html
More informationClose-coupled pumps Series ES04
Close-coupled pumps Series ES04 www.andritz.com/pumps General Description / Application Pumps of series ES04 are extremely compact units which require very little space. They are particularly suitable
More informationSeries Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:
Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every
More informationCPS. Horizontal Split Case Centrifugal Pump
CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water
More informationTP /4-A-F-A-BUBE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 1-6/4-A-F-A-BUBE 4Y 5HZ Grundfos Pump 9642628 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9642628/tp-1-6-4-a-f-a-bube.html
More information320 Series Vertical Sump Pumps
320 Series Vertical Sump Pumps Flows to: 9,200 GPM Heads to: 985 Feet Temperatures to: 400 + F 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products
More informationES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS
ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS Conforms to ISO 2858 Conforms to ISO 5199 Optimized for capacity Efficiency as per Hydraulic Institute & Europump Norms Many product variants -
More informationEtanorm SYT Type Series Booklet
Thermal Oil / Hot Water Pump Etanorm SYT Type Series Booklet Legal information/copyright Type Series Booklet Etanorm SYT All rights reserved. The contents provided herein must neither be distributed, copied,
More informationVolute pumps for hot water up to 230 C
Volute pumps for hot water up to 230 C SIHI SuperNova ZEND 031125... 125250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 rpm Temperature: max. 230 C (1) Casing pressure:
More informationBristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
More informationNon-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationTP /4-A-F-A-BQQE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 4-1/4-A-F-A-BQQE 4Y 5HZ Grundfos Pump 9686883 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9686883/tp-4-1-4-a-f-a-bqqe.html
More informationCRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationCSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps
CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud
More informationMUV. VERTICAL MULTI-STAGE PUMPS 2 pole - 50 Hz APPLICATIONS ADVANTAGES OPERATING RANGES. Certified
OPERATING RANGES Flow rates of up to: 14 m 3 /h Manometric heads of up to: 137 m CE Max. operating pressure: 1 bar Max. intake pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: +
More informationProcess Pump RPH. Type Series Booklet
Process Pump RPH Type Series Booklet Legal information/copyright Type Series Booklet RPH All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
More informationTechnical Data 50 Hz. Vertical centrifugal pumps Series: DPVE / DPV(S) / DPVCF / DPLHS
Technical Data 50 Hz Vertical centrifugal pumps Series: DPVE / DPV(S) / DPVCF / DPLHS DPVE DPV(S) DPVCF DPLHS Table of Contents 1 Pump introduction 1.1 General... 5 1.2 Model key... 5 1.3 Description of
More informationCENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
More informationEUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)
ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump
More informationSNS End Suction Single Stage Centrifugal Pumps
SNS End Suction Single Stage Centrifugal Pumps SNS Process Pumps Range - Efficiency by Design Sulzer s new SNS pump range has been designed to exceed the highest energy efficiency regulations across all
More informationStainless Steel Centrifugal Pump Type 3 SERIES
PUMP Stainless Steel Centrifugal Pump Type APPLICATIONS Water supply to civil, agricultural and industrial plants Pressure boosting Fire-fighting, heating systems and air-conditioning Moving industrial
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More information