abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
|
|
- Jane Farmer
- 5 years ago
- Views:
Transcription
1 abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps
2 Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X X X X X / X X X X X X X - X X X X - X Discharge Size Impeller Nominal Size Seal Type M = Carbon - Ceramic/Viton *P = Gland Packing M1 = Carbon - SiC/Viton (Optional) M2 = Carbon - SiC/EPDM Impeller / Body Casing Material BC = Bronze impeller and Cast Iron Body BD = Bronze impeller and Ductile Iron Body BB = Bronze impeller and Body CC = Cast Iron impeller and Body CD = Cast Iron impeller and Ductile Iron Body KK = SS1 impeller and Body KC = SS1 impeller and Cast Iron Body SS = SS0 impeller and Body SC = SS0 impeller and Cast Iron Body Special Code 1 DB = Double Bearing 1 HH = Bigger Shaft and Bearing Frame 1 OL = Oil Lubricator S = SS0 Shaft K = SS1 Shaft **A2 = Hz / 2 Poles **A = Hz / Poles **B2 = Hz / 2 Poles **B = Hz / Poles **ZZ = Special Motor / Voltage Motor Rating eg.000 = 0.kW 00 =.kw 00 = kw 00 = 0kW Motor Type eg. Stub Shaft Extended Shaft Barepump (B) Note: * Only for EU series of pumps **Applicable to EUM pumps only 1 All shaft are in SS 2
3 Introduction Description: Volute casing centrifugal end suction pump with Back Pull-Out (BPO) feature, main dimensions and performance according to EN7/DIN22 standards. Type : End Suction Centrifugal, Back Pull-Out (BPO) Design : EN7/DIN22 Flange : DIN22 PN RF Direction of Rotation: Clockwise as viewed from the drive side Material: Casing Impeller Shaft Shaft Seal : Cast Iron, Ductile Iron, Bronze and Stainless Steel : Cast Iron, Ductile Iron, Bronze and Stainless Steel : SS optional AISI0 & AISI1 : Mechanical Seal and Gland Packing Operating Range: Flow Rate(Q) : up to 1m /h Head(H) : up to 1m Speed : rpm (Hz) : 17-0 rpm (Hz) Operating Temp. : - C to C standard; optional 1 C Operating Pressure : bar standard; optional 1 Bar Range of Application: EUROFLO Pumps can be used for the following services in the Commercial, Residential, Agricultural, Industrial, Process, Petroleum and Food & Beverage industries: Water Treatment & Supply Sea Water Transfer Fire Fighting & Protection Bilging & Ballasting Pressure Boosting Air Conditioning Cooling Towers Refrigeration Plumbing Circulating Transfer Irrigation Drainage Shaft Spacer Seal Plate Parts: No. Name Mechanical Seal 1 Bearing Cover (Shaft End) 2 Shaft Bearing Housing Shaft protection Sleeve (with Gland Packing only) Mechanical Seal Gland Packing (Option) 7 Volute Casing Impeller 9 Impeller Nut Casing Wear Rings 11 Front Foot Support Seal Plate 1 Slinger 1 Ball Bearings (Deep Groove) Rear Foot Support
4 EU Performance - Hz 2900 RPM I.G.P.M. TOTAL HEAD METRES H H H - -2H FEET FLOW RATE (Q) L / S M /Hr 1 RPM I.G.P.M TOTAL HEAD METRES FEET FLOW RATE (Q) L / S M /Hr
5 EU Performance - Hz 0 RPM I.G.P.M. TOTAL HEAD METRES RPM RPM -2H RPM RPM FEET FLOW RATE (Q) L / S M /Hr 17 RPM I.G.P.M TOTAL HEAD METRES FEET FLOW RATE (Q) L / S 21 M /Hr
6 EU - Installing Dimensions KEY LENGTH KEY WIDTH KEY HEIGHT SEAT DEPTH Shaft Dimensions BEARING HOUSING DIAMETER d NOM KEY HEIGHT KEY WIDTH B ød d2 HOLES øs F D Df PCD OD Flange Data Key dimensions are nominal. D OD B Df F d2 øs PCD ROTATION Service Connections A B* D DD S A B* D DD S S A Pump Model Casing Drain Housing Drain Gauge Tapping Vent Tapping Gauge Tapping Pump Model Casing Drain Housing Drain Gauge Tapping Vent Tapping Gauge Tapping END ELEVATION 2-1 1/ / 1/ 1/ 1/ 2-1 1/ / 1/ 1/ 1/ 2-1/ / 1/ 1/ 1/ 2-2 / / 1/ 1/ 1/ -1 1/ / 1/ 1/ 1/ -1 1/ / 1/ 1/ 1/ - 1/ / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2H / / 1/ 1/ 1/ -1 1/ / 1/ 1/ 1/ -1 / / 1/ 1/ 1/ - 1/ / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2H / / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2H / / 1/ 1/ 1/ -1 1/ / 1/ 1/ 1/ -1 / / 1/ 1/ 1/ - / / 1/ 1/ 1/ -H / / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2H / / 1/ 1/ 1/ -1 / / 1/ 1/ 1/ -1H / / 1/ 1/ 1/ - / / 1/ 1/ 1/ -2 / / 1/ 1/ 1/ -2 / / / 1/ / -2H / / / 1/ / - / / / / / -1 / / / / / - / / / / / -2 / / / / / -2H / / / / 1/2-2 / / / / 1/2 - / 1/2 1/2 / 1/2-2 / 1/2 1/2 / 1/2-2 / 1/2 1/2 / 1/2 - / 1/2 1/2 / 1/2-1/2 / / / / 1- / 1/2 1/2 / 1/2 1-2 / 1/2 1/2 / 1/2 1-2 / 1/2 1/2 / 1/2 1- / 1/2 1/2 / 1/2 1/ 1/2 / / / / 0-2 / 1/2 1/2 / 1/2 0- / 1/2 1/2 / 1/2 0- / / / / / 2- / 1/2 1/2 / 1/2 2- / / / / / 00/ / / / / / Note all service connections are BSP female parallel thread.
7 EU - Installing Dimensions EU - Installing Dimensions con t a f DN2 h 2 l u h 1 c DN1 d b n øs 1 t n 2 n 1 FRONT ELEVATION m 2 m 1 w SIDE ELEVATION ø1 Pump Model Bearing Housing Discharge Suction DN2 Suction Discharge DN1 Pump Dimension Foot Dimension Shaft End h 1 h 2 b c n m 1 m 2 n 1 n 2 s w d l t u Net Weight EU2/ EU2/ EU2/ EU2/ EU/ EU/ EU/ EU/ EU/ EU/2DB EU/2H EU/ EU/ EU/ 1 0 EU/ EU/ EU/2DB EU/2H EU/ EU/ EU/ EU/ EU/ EU/2DB EU/2H EU/ EU/ EU/ EU/ EU/2DB EU/2H EU/ EU/ EU/ EU/ EU/ EU/ EU/ EU/ EU/ EU/ EU/ EU1/ EU1/ EU1/ EU1/ 2 EU1/ EU0/ EU0/ EU0/ EU0/ EU2/ EU2/ EU2/ EU00/ EU00/ Pumps dimension may vary vary,, please refer to to manufacturer. 7 7
8 EUM - Monobloc pump Parts: No. Name 1. Volute Casting 2. Wear Ring. Impeller. Screw Plug. Seal Seat. Mechanical Seal 7. Casing Cover. Bearing 9. IEC Standard Motor. Bearing Cover 11. Adapter. Flexible Washer 1. Circlip For Shaft 1. Slinger. Shaft 1. Impeller Nut Description: EUM pump series series pumps are are designed closed coupled, and manufactured to End the Suction European Centrifugal Standard pumps. EN7/DIN22. This is Designed a closed according coupled version. to EN7/DIN22 The advantage is that the standard pump for can interchangeability. be fitted to IEC standard Pump is electric motors. suitable This to be provides coupled a with wide both range NEMA of motor and to select IEC designed from. Shaft motor stub by are a stub supported shaft that by an extra bearing will eliminated that will time reduces consuming vibration alignments. and improve life performance An extra bearing of the located seals on and the motor stub bearing. located shaft reduces on in the vibration adapter. and improve seal performance even when operating at unfavorable duty condition. Interchangeability: Many of the components are interchangeable resulting in a reduction in spares requirements and an initila cost saving. Material: Casing Impeller Shaft Shaft Seal - Cast Iron standard; optional Stainless Steel - Bronze standard; optional Cast iron or Stainless Steel - SS - Mechanical Seal standard Operating Range: Flow Rate(Q) : up to 7m /hr Head(H) : -10m Speed : rpm (Hz) : 17-0 rpm (Hz) Temperature : - C to C standard; optional C Using pressure : Bar standard.
9 EUM Performance - Hz 2900 RPM I.G.P.M. TOTAL HEAD METRES FEET FLOW RATE (Q) L / S M /Hr 1 RPM I.G.P.M TOTAL HEAD METRES FEET FLOW RATE (Q) L / S M /Hr 9
10 EUM Performance - Hz 0 RPM I.G.P.M. TOTAL HEAD METRES FEET FLOW RATE (Q) L / S M /Hr 17 RPM I.G.P.M. TOTAL HEAD METRES FEET FLOW RATE (Q) L / S M /Hr
11 EUM - Installing Dimensions (2 Pole) Model/Power Suction/Discharge Dimension Type KW / 2pole Inlet Outlet a h1 h 2 L 1 L 2 L A B H HD m 1 m 2 n 1 n 2 S 1 S 2 EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM- 7 2 EUM EUM EUM EUM EUM EUM Pumps dimension may vary, please refer to manufacturer. Weight (kgs) 11
12 EUM - Installing Dimensions ( Pole) Model/Power Suction/Discharge Dimension Weight Type KW / pole Inlet Outlet a h (kgs) 1 h 2 L 1 L 2 L A B H HD m 1 m 2 n 1 n 2 S 1 S 2 EUM EUM EUM EUM EUM2-2 9 EUM EUM EUM EUM EUM- 1. EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM EUM1-21 EUM EUM Pumps dimension may vary, please refer to manufacturer.
13 Project Applications EUROFLO EU pump for self contain high pressure feed fire fighting. EUROFLO End Suction Pumpset used in HVAC and cooling tower system for commercial building. Process Cooling circulation run by EUROFLO centrifugal pump in a car manufacturing plant. 1
14 Notes 1
15 Notes
16 Your local distributor details: Euroflo Pumps International Pte Ltd No.1 Joo Koon Way Singapore 292 Tel: + 1 Fax: + 1 9
EUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)
ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump
More informationabcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG
abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationNormpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationAxial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More informationHYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationTKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationWaterflo WF Series Back pull-out End Suction Centrifugal pump
08 Waterflo WF AKAY INDUSTRIES AKAY WATERFLO WF SERIES Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN 24255 Stuffing Box Standard
More informationHORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
More informationEJseries. Self-Priming Centrifugal Pumps
EJseries Self-Priming Centrifugal Pumps T w w w. e u r o f l o p u m ps. c o m EJseries - Coding System Eg. EJS -11 XX XX XX EJT - XXX XX-XXX XX XXXX XXXX Series EJS = Shaft (bare) pumps EJT = Large Flow
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationHorizontal Double Suction Volute Pump Type CN. Pipe line
PUMP Horizontal Double Suction Volute Pump Type APPLICATIONS Buildings Irrigation Water supply Drainage Water circulation Fire fighting Air conditioning Water supply Drainage Waterworks Water intake Booster
More informationbarmesapumps.com VERTICAL MULTI-STAGE PUMP PERFORMANCE CURVE NOMENCLATURE B M V
VERTICAL MULTI-STAGE PUMP The BMV pump is designed to handle neutral clean liquids. It is a multifunctional product designed to transfer and boost water from various sources. The BMV pump is also designed
More informationBoiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
More informationThe e-nsc End Suction Pump Series
NEW The e-nsc End Suction Pump Series Your go-to single-stage pump for heavy-duty use STANDARDIZED TO EN733, ISO 5199 AND DIRECTIVE 9/125/EC. POTABLE WATER APPROVED (ACS AND DM174). It s not your standard
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationSNM / SNM-V. Close - Coupled Centrifugal Pumps ATEX SNM EN
EN ISO 9905 SN / SNV Close Coupled Centrifugal umps ATEX SN 00 1111 EN General Information SN / SNV Liquids Handled SN / SNV type pumps are suitable for nonaggresive, clean or slightly contaminated liquids
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationSMD axially split casing, double suction pump
SMD axially split casing, double suction pump Main applications SMD single stage, double suction, axial split casing pumps are designed to meet the needs of the water market for a wide range of raw, clean,
More informationEnd suction back pull-out pumps for general industry, mining, rural and building services
End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive
More informationGeneral. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue
Product Catalogue ETA C and D General The well-known ETA-pump on the bearing bracket C and D is constructed in accordance with DIN 24 255 standard and completes the performance range up to max. 100 m3/hr
More informationSIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
More informationStandard SO according to DIN
Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.
More informationILN, ILNC. In Line vertical pumps. ILN single suction ILN double suction ILNC. 1. Fields of Application. 3. Design. 4. Designation. 2.
Type series booklet CTI-2600/04 [04-2017] ILN, ILNC In Line vertical pumps ILN single suction ILN double suction ILNC sizes 65/ to 250/... sizes 300/ all sizes 1. Fields of Application Suitable for a wide
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationAxially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationStainless Steel Centrifugal Pump Type 3 SERIES
PUMP Stainless Steel Centrifugal Pump Type APPLICATIONS Water supply to civil, agricultural and industrial plants Pressure boosting Fire-fighting, heating systems and air-conditioning Moving industrial
More informationMONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron
Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationSingle-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating
OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationN, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationSWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design
RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)
More informationBEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
More informationKIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS. Description. Cut-sectional View. Shaft :
KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS Description Range : Delivery size up to 150 mm Capacity up to 550 m 3 /hr Head up to 100 metres Applications : Suitable for Circulation of Water in Industries,
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationVolute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationKIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation
More informationAjax ISO. Centrifugal Pump ISO Application Application. Designation Designation. Operating Data - 50 Hz. Design. Type Series Booklet
Type Series Booklet Ajax ISO Centrifugal Pump ISO 288 Application Application The KSB Ajax ISO centrifugal pump is suitable for handling water and similar liquids mainly used in the following The KSB Ajax
More informationMZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
More informationNTT CENTRIFUGAL PUMPS TO EN733 (DIN 24255) FOR HEAT TRANSFER OILS UP TO 350 C
FOR HEAT TRANSFER OILS UP TO 350 C WE HAVE ALL THE TICKS Version 1 - NTT: Rapid Allweiler Pumps Whilst all care has been taken to ensure the accuracy of the information contained in this brochure was correct
More informationCasing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
More informationNDM. Horizontal Multistage Centrifugal Pumps, 50Hz
NDM Horizontal Multistage Centrifugal Pumps, 50Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 645 Thun-Gwatt Switzerland Whole Company Design, development,
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationMTB /158 A-F-A-BQQV 400D-2 5,5kW
GRUNDFOS DATA BOOKLET MTB 5-1/158 A-F-A-BQQV D- 5,5kW Grundfos pump 95879 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/95879/mtb-5-1-158-a-f-a-bqqv.html
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationFE Frame-Mounted End Suction Pumps. Leading The Flow. TACO.
FE Frame-Mounted End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. FE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationTP /2-A-F-A-BAQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 32-38/2-A-F-A-BAQE 4D 5HZ Grundfos Pump 968677 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/968677/tp-32-38-2-a-f-a-baqe.html
More informationA U S T R A L I A founded 1948
A U S T R A L I A founded 1948... all about moving fluids Regent Pumps Vertical Turbine Pumps has a wide ranging applications. Typical application include:- Water Treatment Plants Water Well Steel Mill
More informationSubmersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
More informationMARINE & OFFSHORE PUMP SOLUTIONS PROVEN TECHNOLOGY
MARINE & OFFSHORE PUMP SOLUTIONS PROVEN TECHNOLOGY DESMI Centrifugal Pumps (Vertical Pumps) DESMI centrifugal pumps are used as cooling, ballast, fire, and bilge pumps for fresh as well as seawater. The
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP. Chemical Centrifugal Pump Acc. to DIN EN ISO 2858 & DIN EN ISO 5199
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP Chemical Centrifugal Pump Acc. to DIN EN ISO 288 & DIN EN ISO 1 For more than years the name Ruhrpumpen has been synonymous worldwide with innovation
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationRDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
More informationBristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
More informationHORIZONTAL DOUBLE SUCTION VOLUTE PUMPS
HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS APPLICATIONS Buildings Water supply Drainage Water circulation Fire fighting Air conditioning Irrigation Water supply Drainage Waterworks FEATURES Split case design
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationVM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationHORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
More informationTP /4-A-F-A-BUBE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 1-6/4-A-F-A-BUBE 4Y 5HZ Grundfos Pump 9642628 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9642628/tp-1-6-4-a-f-a-bube.html
More informationVERTICAL MULTISTAGE PUMP SETS
VERTICAL MULTISTAGE PUMP SETS Not all pumps are born equal. Vada pumps are tough. Powerful. Hardworking. They re serious pumps for serious jobs. If water needs to be moved efficiently and effectively -
More informationTechnical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.
Technical Data DML Submersible Sewage s with Single Channel Impeller AUSTRALIA PTY. LTD. DML_Techdata_SS_V Contents -SPECIFICATIONS FEATURES & APPLICATIONS TYPICAL EXPLODED VIEW SPECIFICATIONS SELECTION
More informationSILI PUMP, Your reliable one-stop supplier of marine pumps.
SILI PUMP, Your reliable one-stop supplier of marine pumps. Shanghai SILI PUMP Industry Co., Ltd. Add: No.128 Jinyuan Road, 201518, Shanghai, China (Jinyuan Industry Area) Tel: 0086-21-39109967, fax: 0086-21-39109967
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationTP /4-A-F-A-BQQE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 4-1/4-A-F-A-BQQE 4Y 5HZ Grundfos Pump 9686883 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9686883/tp-4-1-4-a-f-a-bqqe.html
More informationHeat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet
Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,
More informationKIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199
KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal
More informationCENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
More informationVERTICAL TURBINE PUMP
21A, Canning Street, Ground Floor, Kolkata 700001, (W.B) India Ph.: (033) 22308125, 39855288, Mob: 09339834915 Fax: (033) 2230 8125, E- mail: powerpointpumps@yahoo.co.in Website: www.powerpointpumps.com
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationG&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries
G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum
More informationCRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-21 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96515918 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96515918/crn-1s-21-a-fgj-g-e-hqqe.html
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationCRI10-14 A-FGJ-I-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRI1-1 A-FGJ-I-E-HQQE 3xD 5 HZ Grundfos Pump 96512 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1/96512/cri-1-1-a-fgj-i-e-hqqe.html
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationXVM. Vertical, Multi-Staged Stainless Steel Pumps FEATURES APPLICATIONS
Vertical, Multi-Staged Stainless Steel Pumps FEATURES The pump is a non-self-priming vertical multistage centrifugal pump coupled to a standard motor. Inlet and outlet are located at the bottom at the
More informationCE Close-Coupled End Suction Pumps. Leading The Flow. TACO.
CE Close-Coupled End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. CE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More information