- Soft resin impregnated Stacked winding Tripple Safety System

Transcription

1 TORRENT Reactive Power Solutions - Soft resin impregnated Stacked winding Tripple Safety System Parameter Unit Hercules Reference Standard IS / IEC Power (Rated Capacitance) Qn 1 30 Tolerance 0 10% Connection Delta Rated voltage Rated Frequency f R 50 / 60 Hz Max. Ratings Max. Permisible Voltage Max. Permisible Current Vmax. Imax % (up to 8 h daily) + 15 % (up to 30 min daily) + 20 % (up to 5 min daily) + 30 % (up to 1 min daily) Up to 1.3 x I R (up to 1.5 x I incl. combined R effects of harmonics, over voltages and capacitance) Max. Transient Inrush Current Handling Capacity I S up to 200 x I R Test Data AC Test Voltage Terminal to Terminal V TT 2.15 x U N, 2 Sec. Insulation Voltage Between Terminal & Container V TC 3600 V AC, 2 Sec. Losses: Dielectric < 0.2 W/ Total* < 0.4 W/ Climatic Category Ambient Temperature 0 C -25 / D; max. temp C; max mean 24h = 45 0 C; max. mean 1 year = 35 0 C; lowest temp. = C Max. humidity H rel 95% Max. Permisible Altitute 4000 M above sea level Design Data Case Material / Shape Aluminium / Cylindrical Dimensions According to specification table page no. 33, 34 Dielectric Impregnation Fixing Polypropylene Film Soft Resin Threaded Bolt M8 / M12 Max. Tourque for Fixing N m 4 Nm / 10 Nm Mounting Position Terminals Degree of Protection Safety Upright. Horizontal mounting with additional head support possible. Upto 5 fast on and above clamp IP20 optional IP54 Max. Tourque for Connection Terminals (6 and above) N m 2.5 Nm Safety Mechnical Safety Discharge Device Tear of fuses, overpressure disconnector Resister Discharge Device Time Sec. 60 Sec (50 V) Cooling Max. Switching Operations Ordering Code Natural or Forced Max Nos. Per Year QHNTC* Note: 1. It should be noted that presence of harmonics produce over voltage & over current on capacitors. Resonance may cause serious damage to capacitor if a significant level of total harmonic distortion level exists for voltage or current. In such cases, series reactors must be considered. 2. Operating temperature class: In accordance with the reference standards, these temperatures are those measured on the surface on the capacitor. * Without Discharge Resister 31

2 TORRENT Technical data, specifications & dimensional drawing of plastic top capacitor series up to 5 Reactive Power Solutions Diameter D (Ø) Expansion µ 50 / 63.5 / 68mm max. 12 mm Mounting M 12 M8 (Ø 63.5 mm / 68 mm) (Ø 50 mm) Torque T = 10 Nm T = 4 Nm Toothed Washer Hex nut Technical data, specifications & dimensional drawing of Metal top capacitor series above 5 Diameter D 1 (Ø) Diameter D (Ø) Expansion µ 79.5 mm / 89.5 mm / 94.5 mm 75.0 mm / 85.0 mm / 90 mm max. 13 mm Mounting M 12 Torque T = 10 Nm Toothed Washer 12.5 Hex nut 12 Terminal Cover for IP 54 32

3 Three phase power capacitor (Normal Duty) 50Hz Current (A) Rated Voltage 400 V AC 60Hz Current (A) Capacitance (3XµF) D (mm) H (mm) Pack Unit* Product Code QHNTCQ5001X QHNTCQ5002X QHNTCQ5002X QHNTCQ5003X QHNTCQ5004X QHNTCQ5005X QHNTCQ5006X QHNTCQ5007X QHNTCQ5007X QHNTCQ5010X QHNTCQ5012X QHNTCQ5015X QHNTCQ5020X QHNTCQ5025X0 Rated Voltage 415 V AC QHNTCB5001X QHNTCB5002X QHNTCB5002X QHNTCB5003X QHNTCB5004X QHNTCB5005X QHNTCB5006X QHNTCB5007X QHNTCB5007X QHNTCB5010X QHNTCB5012X QHNTCB5015X QHNTCB5020X QHNTCB5025X0 Rated Voltage 440 V AC QHNTCC5001X QHNTCC5002X QHNTCC5002X QHNTCC5003X QHNTCC5004X QHNTCC5005X QHNTCC5006X QHNTCC5007X QHNTCC5007X QHNTCC5008X QHNTCC5010X QHNTCC5012X QHNTCC5015X QHNTCC5020X QHNTCC5025X0 33

4 Three phase power capacitor (Normal Duty) Current (A) 50Hz Rated Voltage 480 V AC Current (A) 60Hz Capacitance (3XµF) D (mm) H (mm) Pack Unit* *Packing units for capacitors equal minimum order quantity. Orders will be rounded up to packing unit or multiple thereof. Note: Customized products available upon request. Minimum Order Quantity 50 Nos. All Hercules type capacitors may be used for 60Hz, the output will be 1.2 times higher Replace X with E for export orders. Product Code QHNTCD5001X QHNTCD5002X QHNTCD5002X QHNTCD5003X QHNTCD5004X QHNTCD5005X QHNTCD5006X QHNTCD5007X QHNTCD5007X QHNTCD5008X QHNTCD5010X QHNTCD5012X QHNTCD5015X QHNTCD5020X QHNTCD5025X QHNTCD5030X0 Rated Voltage 525 V AC QHNTCF5001X QHNTCF5002X QHNTCF5002X QHNTCF5003X QHNTCF5004X QHNTCF5005X QHNTCF5006X QHNTCF5007X QHNTCF5007X QHNTCF5008X QHNTCF5010X QHNTCF5012X QHNTCF5015X QHNTCF5020X QHNTCF5025X0 34

5 35

6 Cylindrical PFC Capacitor Phantom Three Phase PFC Capacitors (Heavy Duty) Non PCB Soft Resin Impregnated Stacked Winding Tripple Safety System General Phantom capacitors are MPP (metalized polypropylene) capacitors from Havells which have been used for PFC applications for more than 7 years. The power range varies from 1.0 to The Phantom capacitor is used for power factor correction in industrial applications where some amount of harmonics are presents. Applications Power Factor Correction (PFC) Automatic capacitor banks Fixed PFC applications, e.g. motor compensation Detuned PFC systems Dynamic PFC systems Filter Application Features Compact design in cylindrical aluminum can with stud Stacked winding MPP technology Voltage range V Output range Electrical Long life expectancy of up to hours Max. transient inrush current handling capability is 250 x I R Mechanical and maintenance Reduced mounting costs Easy installation and connection Low weight and compact volume Maintenance-free Safety Self-healing Overpressure disconnector Shock hazard protected optimized capacitor safety terminals above 6 36

7 - Soft resin impregnated Stacked winding Tripple Safety System Parameter Unit Phantom Reference Standard IS / IEC Power (Rated Capacitance) Qn 1 25 Tolerance 0 10% Connection Delta Rated voltage Rated Frequency f R 50 / 60 Hz Max. Ratings Max. Permisible Voltage Max. Permisible Current Vmax. Imax % (up to 8 h daily) + 15 % (up to 30 min daily) + 20 % (up to 5 min daily) + 30 % (up to 1 min daily) Up to 1.3 x I R (up to 1.5 x I incl. R combined effects of harmonics, over voltages and capacitance) Reactive Power Solutions Max. Transient Inrush Current Handling Capacity I S up to 250 x I R Test Data AC Test Voltage Terminal to Terminal V TT 2.15 x U N, 2 Sec. Insulation Voltage Between Terminal & Container V TC 3600 V AC, 2 Sec. Losses: Dielectric < 0.2 W/ Total* < 0.4 W/ Climatic Category Ambient Temperature 0 C -25 / D; max. temp C; max mean 24h = 45 0 C; max. mean 1 year = 35 0 C; lowest temp. = C Max. humidity H rel 95% Max. Permisible Altitute 4000 M above sea level Design Data Case Material / Shape Aluminium / Cylindrical Dimensions According to Specification Table Page No. 39, 40 Dielectric Polypropylene Film Impregnation Soft Resin Fixing Threaded Bolt M8 / M12 Max. Tourque for Fixing N m 4 Nm / 10 Nm Mounting Position Upright. Horizontal mounting with additional head support Possible. Terminals Upto 5 fast on and above clamp Degree of Protection Safety IP20 optional IP54 Max. Tourque for Connection Terminals (6 and above) N m 2.5 Nm Safety Mechnical Safety Tear of fuses, overpressure disconnector Discharge Device Resister Discharge Device Time Sec. 60 Sec (50 V) Cooling Natural or Forced Max. Switching Operations Max Nos. Per Year Ordering Code QHHTC* Note: 1. It should be noted that presence of harmonics produce over voltage & over current on capacitors. Resonance may cause serious damage to capacitor if a significant level of total harmonic distortion level exists for voltage or current. In such cases, series reactors must be considered. 2. Operating temperature class: In accordance with the reference standards, these temperatures are those measured on the surface on the capacitor. * Without Discharge Resister 37

8 Technical data, specifications & dimensional drawing of plastic top capacitor series up to 5 Diameter D (Ø) Expansion µ 50 / 63.5 / 68mm max. 12 mm Mounting M 12 M8 (Ø 63.5 mm / 68 mm) (Ø 50 mm) Torque T = 10 Nm T = 4 Nm Toothed Washer Hex nut Technical data, specifications & dimensional drawing of Metal top capacitor series above 5 Diameter D 1 (Ø) Diameter D (Ø) Expansion µ 79.5 mm / 89.5 mm / 94.5 mm 75.0 mm / 85.0 mm / 90 mm max. 13 mm Mounting M 12 Torque T = 10 Nm Toothed Washer 12.5 Hex nut 12 Terminal Cover for IP 54 38

9 Three phase power capacitor (Heavy Duty) 50Hz Current (A) Rated Voltage 400 V AC 60Hz Current (A) Capacitance (3XµF) D (mm) H (mm) Pack Unit* Product Code QHHTCQ5001X QHHTCQ5002X QHHTCQ5002X QHHTCQ5003X QHHTCQ5004X QHHTCQ5005X QHHTCQ5006X QHHTCQ5007X QHHTCQ5007X QHHTCQ5008X QHHTCQ5010X QHHTCQ5012X QHHTCQ5015X QHHTCQ5020X QHHTCQ5025X0 Rated Voltage 415 V AC QHHTCB5001X QHHTCB5002X QHHTCB5002X QHHTCB5003X QHHTCB5004X QHHTCB5005X QHHTCB5006X QHHTCB5007X QHHTCB5007X QHHTCB5008X QHHTCB5010X QHHTCB5012X QHHTCB5015X QHHTCB5020X QHHTCB5025X0 Rated Voltage 440 V AC QHHTCC5001X QHHTCC5002X QHHTCC5002X QHHTCC5003X QHHTCC5004X QHHTCC5005X QHHTCC5006X QHHTCC5007X QHHTCC5007X QHHTCC5008X QHHTCC5010X QHHTCC5012X QHHTCC5015X QHHTCC5020X QHHTCC5025X0 39

10 Three phase power capacitor (heavy duty) Current Current Capacitance D H Pack (A) (A) (3XµF) (mm) (mm) Unit* Product Code 50Hz 60Hz Rated Voltage 480 V AC QHHTCD5001X QHHTCD5002X QHHTCD5002X QHHTCD5003X QHHTCD5004X QHHTCD5005X QHHTCD5006X QHHTCD5007X QHHTCD5007X QHHTCD5008X QHHTCD5010X QHHTCD5012X QHHTCD5015X QHHTCD5020X QHHTCD5025X0 Rated Voltage 525 V AC QHHTCF5001X QHHTCF5002X QHHTCF5002X QHHTCF5003X QHHTCF5004X QHHTCF5005X QHHTCF5006X QHHTCF5007X QHHTCF5007X QHHTCF5008X QHHTCF5010X QHHTCF5012X QHHTCF5015X QHHTCF5020X QHHTCF5025X0 *Packing units for capacitors equal minimum order quantity. Orders will be rounded up to packing unit or multiple thereof. Note: Customized products available upon request. Minimum Order Quantity 50 Nos. All Phantom Type capacitors may be used for 60Hz, the output will be 1.2 times higher Replace X with E for export orders. 40

11 41

12 Cylindrical PFC Capacitor Agri Boost Three Phase PFC Capacitors Non PCB Soft Resin Impregnated Stacked Winding Tripple Safety System General Agri Boost capacitors are MPP (metalized polypropylene) capacitors from Havells which have been used for PFC applications for more than 7 years. The power range varies from 1.0 to The Agri Boost capacitor is used for power factor correction. Applications Agriculture Use Features Compact design in cylindrical aluminum can with stud Stacked winding MPP technology Voltage range 415 V Output range Electrical Long life expectancy of up to hours Max. transient inrush current handling capability is 200 x I R Mechanical and maintenance Reduced mounting costs Easy installation and connection Low weight and compact volume Maintenance-free 42

13 - Soft resin impregnated Stacked winding Tripple Safety System Parameter Unit Agri Boost Reference Standard IS Power (Rated Capacitance) Qn 1 15 Tolerance 0 10% Connection Delta Rated voltage Rated Frequency f R 50 / 60 Hz Max. Ratings Max. Permisible Voltage Max. Permisible Current Vmax. Imax % (up to 8 h daily) + 15 % (up to 30 min daily) + 20 % (up to 5 min daily) + 30 % (up to 1 min daily) Up to 1.3 x I R (up to 1.5 x I incl. R combined effects of harmonics, over voltages and capacitance) Max. Transient Inrush Current Handling Capacity I S up to 200 x I R Test Data AC Test Voltage Terminal to Terminal V TT 1.75 x U N, 2 Sec. Insulation Voltage Between Terminal & Container V TC 3600 V AC, 2 Sec. Losses: Dielectric < 0.2 W/ Total < 0.4 W/ Climatic Category Ambient Temperature 0 C -25 / D; max. temp C; max mean 24h = 45 0 C; max. mean 1 year = 35 0 C; lowest temp. = C Max. humidity H rel 95% Max. Permisible Altitute 4000 M above sea level Mean Life Expectancy t LD (co) Hrs Design Data Case Material / Shape Aluminium / Cylindrical Dimensions According to Specification Table Page No. 44 Dielectric Polypropylene Film Impregnation Soft Resin Fixing Threaded Bolt M8 / M12 Mounting Position Upright. Horizontal mounting with additional head support Possible. Terminals Wire Terminal Degree of Protection Safety IP54 Max. Tourque for Connection Terminals (6 and above) N m Safety Mechnical Safety Tear of fuses, overpressure disconnector Discharge Device Resister Discharge Device Time Sec. 60 Sec (50 V) Cooling Natural or Forced Max. Switching Operations Max Nos. Per Year Ordering Code QHATC* Note: 1. It should be noted that presence of harmonics produce over voltage & over current on capacitors. Resonance may cause serious damage to capacitor if a significant level of total harmonic distortion level exists for voltage or current. In such cases, series reactors must be considered. 2. Operating temperature class: In accordance with the reference standards, these temperatures are those measured on the surface on the capacitor. 43

14 Three phase power capacitor 50Hz Current (A) 60Hz Rated Voltage 415 V AC (Normal Duty) Current (A) Capacitance (3XµF) D (mm) H (mm) Pack Unit* Product Code QHATCB5001X QHATCB5002X QHATCB5003X QHATCB5004X QHATCB5005X QHATCB5006X QHATCB5007X QHATCB5007X QHATCB5008X QHATCB5010X QHATCB5012X QHATCB5015X0 Rated Voltage 415 V AC (Heavy Duty) QHITCB5001X QHITCB5002X QHITCB5003X QHITCB5004X QHITCB5005X QHITCB5006X QHITCB5007X QHITCB5007X QHITCB5008X QHITCB5010X QHITCB5012X QHITCB5015X0 *Packing units for capacitors equal minimum order quantity. Orders will be rounded up to packing unit or multiple thereof. Note: Customized products available upon request. Minimum Order Quantity 50 Nos. All Agri Boost Type capacitors may be used for 60Hz, the output will be 1.2 times higher 44

15 Havells easy way to perform energy consumption studies Harmonic Analysis Reactive Power Solutions For finding energy waste in commercial, factory buildings and equipment through energy consumption studies and electrical load analysis and perform power quality logging and analysis according to IEEE IEEE Recommended Practices & Requirements for Harmonic Control in Electrical Power System. Electronic equipment study measures virtually every power system parameter: voltage, current, frequency, power, energy consumption, cos f or power factor, unbalance, and harmonics and inter-harmonics. Load studies and energy assessments Monitor maximum power demand over user-defined averaging periods Demonstrate the benefit of efficiency improvements with energy consumption tests Measure harmonic distortion caused by electronic loads Analyze reliability problems by capturing voltage dips and swells from load switching Showcase events like dips and swells, interruptions and rapid voltage changes, based upon ½ cycle rms values. Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for measurements at service entrance Analyze every parameter on display The System-Monitor overview screen gives instant insight into whether the voltage, harmonics, frequency, and the number of dips and swells fall outside the set limits.provides analysis of user-selectable parameters to find intermittent problems or relate PQ issues to other phenomena/events. customize measurement selections and provides analysis of user-selectable parameters to find intermittent problems or relate PQ issues to other phenomena/events. Measure and record power (W), VA and VARs. Graph shows voltage and current unbalance, and helps verify connections For queries & price offer on harmonic analysis, please marketing@havells.com or contact our nearest sales offices. 45

16 Square Cap PFC Capacitor Mini Master / Master Three Phase PFC Capacitors (Normal Duty) Non PCB Soft Resin Impregnated Modular Construction Tripple Safety System General Mini Master / Master capacitors are MPP (metalized polypropylene) capacitors from Havells which have been used for PFC applications for more than 7 years. The power range varies from 1.0 to The Mini Master / Master capacitor is used for power factor correction in industrial applications. Applications Power Factor Correction (PFC) Automatic capacitor banks Fixed PFC applications, e.g. motor compensation Detuned PFC systems Dynamic PFC systems Filter Application Features Compact design in powder coated MS enclosure with base mounting facility Modular Construction MPP technology Voltage range V Output range Electrical Long life expectancy of up to hours Max. transient inrush current handling capability is 200 x I R Mechanical and maintenance Reduced mounting costs Easy installation and connection Low weight and compact volume Maintenance-free Safety Self-healing shield Overpressure disconnector shield Notch shield 46

17 Square PFC capacitor series for power factor correction Parameter Unit Mini Master / Master Reference Standard IS / IEC Power (Rated Capacitance) Qn Tolerance 0 10% Connection Delta Rated voltage Rated Frequency f R 50 / 60 Hz Max. Ratings Max. Permisible Voltage Vmax % (up to 8 h daily) + 15 % (up to 30 min daily) + 20 % (up to 5 min daily) + 30 % (up to 1 min daily) Max. Permisible Current Imax. Up to 1.3 x I R (up to 1.5 x I incl. combined R effects of harmonics, over voltages and capacitance) Max. Transient Inrush Current Handling Capacity I S up to 200 x I R Test Data AC Test Voltage Terminal to Terminal V TT 2.15 x U N, 2 Sec. Insulation Voltage Between Terminal & Container V TC 3600 V AC, 2 Sec. Losses: Dielectric < 0.2 W/ Total* < 0.4 W/ Climatic Category Ambient Temperature 0 C -25 / D; max. temp C; max mean 24h = 45 0 C; max. mean 1 year = 35 0 C; lowest temp. = C Max. humidity H rel 95% Permisible Altitute Max M above sea level Mean Life Expectancy t LD (co) Hrs Design Data Case Material / Shape Powder Coated, Fabricated Sheet Metal / Rectangular Dimensions According to Specification Table Page No. 48, 49 Dielectric Impregnation Fixing Mounting Position Degree of Protection Safety Polypropylene Film Soft Resin Base Mounting Upright IP41 Fabricated sheet metal Safety Mechnical Safety Discharge Device Tear of fuses, overpressure disconnector Resister Discharge Device Time Sec. 60 Sec (50 V) Cooling Max. Switching Operations Ordering Code Natural or Forced Max Nos. Per Year QHNTM* Note: 1. It should be noted that presence of harmonics produce over voltage & over current on capacitors. Resonance may cause serious damage to capacitor if a significant level of total harmonic distortion level exists for voltage or current. In such cases, series reactors must be considered. 2. Operating temperature class: In accordance with the reference standards, these temperatures are those measured on the surface on the capacitor. * Without Discharge Resister 47

18 Technical Data, Specifications & Dimensional Drawing H A1 A3 D A2 Dimensions in (mm) Frame Size A1 A2 A3 D H B B B B B K H D A1 A2 A3 Dimensions in (mm) Bank Rating A1 A2 A3 D H K X 2 nos X 3 nos X 4 nos

19 Three phase power capacitor (Normal Duty) Current Current Capacitance Pack Frame Size (A) (A) (3XµF) Unit* Product Code 50Hz 60Hz Rated Voltage 415 V AC B00 30 QHNTMB5001X B00 30 QHNTMB5002X B0 24 QHNTMB5003X B0 24 QHNTMB5004X B0 24 QHNTMB5005X B1 1 QHNTMB5006X B1 1 QHNTMB5007X B1 1 QHNTMB5007X B1 1 QHNTMB5008X B1 1 QHNTMB5010X B2 1 QHNTMB5012X B2 1 QHNTMB5015X (2 X 61.6) B3 1 QHNTMB5020X (2 X 77.0) B3 1 QHNTMB5025X (2 X 92.4) B3 1 QHNTCB5030X (4 X 77.0) 25 X 2 NOS** 1 QHNTMB5050X (6 X 77.0) 25 X 3 NOS** 1 QHNTMB5075X (8 X 77.0) 25 X 4 NOS** 1 QHNTMB5100X0 Rated Voltage 440 V AC B00 30 QHNTMC5001X B00 30 QHNTMC5002X B0 24 QHNTMC5003X B0 24 QHNTMC5004X B0 24 QHNTMC5005X B1 1 QHNTMC5006X B1 1 QHNTMC5007X B1 1 QHNTMC5007X B1 1 QHNTMC5008X B1 1 QHNTMC5010X B2 1 QHNTMC5012X B2 1 QHNTMC5015X (2 X 54.8) B3 1 QHNTMC5020X (2 X 68.5) B3 1 QHNTMC5025X (2 X 82.2) B3 1 QHNTMC5030X (4 X 68.5) 25 X 2 NOS** 1 QHNTMC5050X (6 X 68.5) 25 X 3 NOS** 1 QHNTMC5075X (8 X 68.5) 25 X 4 NOS** 1 QHNTMC5100X0 *Packing units for capacitors equal minimum order quantity. Orders will be rounded up to packing unit or multiple thereof. Note: QHNTW is with wire terminal & QHNTM is with bolt terminal. Customized products available upon request. Minimum Order Quantity 50 Nos. All Minimaster & Master Type capacitors may be used for 60Hz, the output will be 1.2 times higher 49

20 CHAMP Square Cap PFC Capacitor Master Plus Three Phase PFC Capacitors (Heavy Duty) Non PCB Soft Resin Impregnated Modular Construction Tripple Safety System General Master Plus capacitors are MPP (metalized polypropylene) capacitors from Havells which have been used for PFC applications for more than 7 years. The power range varies from 1.0 to The Master Plus capacitor is used for power factor correction in industrial applications. Applications Power Factor Correction (PFC) Automatic capacitor banks Fixed PFC applications, e.g. motor compensation Detuned PFC systems Dynamic PFC systems Filter Application Features Compact design in powder coated MS enclosure with base mounting facility Modular Construction MPP technology Voltage range V Output range Electrical Long life expectancy of up to hours Max. transient inrush current handling capability is 250 x I R Reduced mounting costs Easy installation and connection Low weight and compact volume Maintenance-free Safety Self-healing shield Overpressure disconnector shield Notch shield 50