Medium Voltage Capacitors

Transcription

1 Type MSCE and MSCD Features that matter: Single and Three-Phase Capacitors Up to 22 kv (50 / 60 Hz) Up to 1000 kvar For indoor and outdoor installation 1

2 Type MSCE and MSCD Application Product Scope The capacitors are designed for power factor correction and Harmonic filtration in power network. They are allfilm dielectric and impregnated with an environmentally friendly, Non-PCB biodegradable insulating oil. In addition each capacitor is provided with an internal discharge resistor. All FRAKO capacitors comply with most national and international capacitor standards. Capacitor benefits to - Improve Factor - Reduce Line Losses - Decrease Voltage Drop Through that it helps greater Energy Efficiency. Range: Voltage Range: Frequency: Standards: Single Phase 25kvar to 1000kvar Three Phase 50kvar to 500kvar Single Phase 1000V to 22000V Three Phase 1000V to 11000V 50Hz / 60Hz IEC, ANSI / IEEE, NEMA Technical Specification Capacitor Losses Ambient Temperature Over-voltage capability 0.2 W / kvar or less with internal fuse 0.15 W / kvar or less without internal fuse -40 C / A (+40 C) / B (+45 C) / C (+50 C) / D (+55 C) U N + 10% (up to 8 hours daily) U max Over-current capability I max I N x 1.3 Painting Color Munsell No. 5Y 7/1 Reference Standard IEC U N + 15% (up to 30 minutes daily) U N + 20% (up to 5 minutes) U N + 30% (up to 1 minute) Bushing Characteristics BIL in kv Creepage Distance in mm Strike Distance in mm Total Height in mm 60 Hz Withstand Dry Test Wet Test The standard terminal size is M12, but M16 could be applied according to rated voltage. Same Bushing is used on 60 and 75kV BIL of capacitor units. Bird Cap and Parallel-groove connector with all bushings are supplied, and it is applicable to Copper or Aluminum conductor [14~100mm² 2line]. Applied bushing could be changed by special requirements. 2

3 Type MSCE Single Phase Capacitor - Insulation Level 36 kv [50/150] Capacitor without Internal Fuse 33000, V Capacitor Rated Voltage: 19050/9530, 17320/8660 V Capacitor with Internal Fuse 33000, V Capacitor Rated Voltage: 9530, 8660 V Single-Bushing Capacitor also could be provided. Applied bushing could be changed by special requirements [See table under Bushing Characteristics]. Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. 3

4 Type MSCE Single Phase Capacitor - Insulation Level 24 kv [50/125] Capacitor without Internal Fuse V Capacitor Rated Voltage: 13860/6930 V Capacitor with Internal Fuse V Capacitor Rated Voltage: 13860/6930 V Single-Bushing Capacitor also could be provided. Applied bushing could be changed by special requirements [See table under Bushing Characteristics]. Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. 4

5 Type MSCE Single Phase Capacitor - Insulation Level 17.5 kv [38/95] Capacitor without Internal Fuse V Capacitor Rated Voltage: 8660 V Capacitor with Internal Fuse 15000, V Capacitor Rated Voltage: 8660, 7970 V Single-Bushing Capacitor also could be provided. Applied bushing could be changed by special requirements [See table under Bushing Characteristics]. Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. 5

6 Type MSCE Single Phase Capacitor - Insulation Level 12 kv [28/75] Capacitor without Internal Fuse 12000, V Capacitor Rated Voltage: 6930, 6350 V Capacitor with Internal Fuse 12000, V Capacitor Rated Voltage: 6930, 6350 V Single-Bushing Capacitor also could be provided. Applied bushing could be changed by special requirements [See table under Bushing Characteristics]. Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. 6

7 Type MSCE Single Phase Capacitor - Insulation Level 7.2 kv [20/60] Capacitor without Internal Fuse 7200, 6600, 6300, 6000 V Capacitor Rated Voltage: 4160, 3800, 3640, 3460 V Capacitor with Internal Fuse 7200, 6600, 6300, 6000 V Capacitor Rated Voltage: 4160, 3800, 3640, 3460 V Applied bushing could be changed by special requirements [See table under Bushing Characteristics]. Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. 7

8 Type MSCD Three Phase Capacitor - Insulation Level 12 kv [28/75] Capacitor V Capacitor Rated Voltage: V Three Phase Capacitor - Insulation Level 7.2 kv [20/60] Capacitor 7200, 6600, 6300, 6000 V Capacitor Rated Voltage: 7200, 6600, 6300, 6000 V Applied bushing could be changed by special requirements [See table under Bushing Characteristics] Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. Brackets are optional. 8

9 Type MSCD Three Phase Capacitor - Insulation Level 7.2 kv [20/60] Capacitor with Unbalanced Protection 7200, 6600, 6300, 6000 V Capacitor Rated Voltage: 7200, 6600, 6300, 6000 V Applied bushing could be changed by special requirements [See table under Bushing Characteristics]. Approximate dimensions and weights are given above. Please contact to factory for exact dimensions of a particular unit before order. Brackets are optional. 9

10 Capacitor innovation, development and production since 1928 Check out other FRAKO Products AC Capacitors Dry type design 240 V to 800 V, up to 40 kvar High current capability up to 2.7 nominal capacitor current (50 Hz) Ambient temperature up to 68 C Also available with following agency approvals: Altitude up to 4,000 meters Patented terminals offer fast, antivibration and maintanance free wiring Capacitor Switching Contactors Patented design with significant damping of inrush current Long life, tested for up to 100,000 switchings High reliability and low power losses Available for use in systems with or without reactors FRAKO Kondensatoren- und Anlagenbau GmbH Tscheulinstr. 21a Teningen Germany Phone: Fax: info@frako.com Internet: 10