SH330-5/SH330LC-5/SH350HD-5/SH350LHD-5 Hydraulic Excavator

Transcription

1 /SH330L-5/SH350-5/SH350L-5 Hydraulic Excavator Engine Rated Power(Net) : 202 kw 274 PS Operating weight : 33,400 34,100 kg SH330L-5 34,000 34,800 kg SH ,600 36,300 kg SH350L-5 36,100 36,900 kg apacity(iso heaped) : m Naganumahara-cho, Inage-ku,hiba, Japan For further information please contact: Phone : Facsimile : We are constantly improving our products and therefore reserve the right to change designs and specifications without notice.illustrations may include optional equipment and accessories and may not include all standard equipment. at. No T.SH330/ Printed in Japan

2 MDE IN JPN The world knows that Japanese design and manufacturing is the best especially for industrial products. The hydraulic excavator is not the exception when a total integration concept is required in design work involving key components, manufacturing engineering and product quality assurance in the factory. ll hydraulic excavators are engineered and assembled 's its one and only factory located in hiba ity, Japan, and distributed to each country in the world. This distinctive feature is unique to, giving the machine users total comfort and reliance on product quality. (Note: Some of the items manufactured and sourced in other countries may be assembled in Japan.) Engine and Hydraulics SPE 5 SIH S New working mode Durability Stronger boom and arm Durable bucket Ridged swing frame Undercarriage Maintenance High performance hydraulic return filter Fuel tank Engine oil drain coupler Ground level maintenance The new engine complies with the Emission Regulations U.S. EP Tier III, and EU Stage III. The advanced low noise design complies with the upcoming EU noise regulation 2000/14/E, STGE II. Operator omfort Spacious cabin omfortable operator's seat Message display from LD monitor Safety 14 Optimised view from cabin High -rigidity cabin structure ustomer and Product Support 15 Specifications

3

4 Engine and Hydraulics The integration of the new engine system SPE 5 and new hydraulic system SIH:S has created 5% fuel efficiency improvement in comparison with our conventional model. New engine system + New hydraulic system = Hydraulic Oil Flow ontrol unique design In the case of sudden lever movement and high load activation, the newly developed hydraulic control system reduces the main pump oil flow intentionally and keeps the engine speed at a constant level. This enables a reduction in fuel consumption. In addition, this also reduces the level of exhaust smoke due to excessive fuel injection. Mode Selection by Throttle Mode selection by pressing the button in our previous model sometimes cause inconveniences for the operator. The throttle control system has been upgraded and the new system "" mode which stands for "djustment Mode" now covers the 3 previous modes of "uto, Standard and Light". In addition there is "H" (Heavy) mode and "SP" (Speed Priority) mode, and the hydrostatic pump oil flow will be regulated automatically in each of the odes respectively. The SP mode is added to the operation mode. Furthermore, the (djustment) mode is added to the SP and H modes, respectively. In comparison with the H mode of Dash 3, the H mode of Dash 5 has reduced the fuel consumption by 5% as compared with Dash 3. 5% reduction in fuel consumption compared to SH330/350-3 (H mode) *The fuel consumption may vary from time to time depending on site and working conditions, operator skill and other circumstances. Greater productivity and increased working efficiency Reduction of Hydraulic unique design Oil Flow at Swing The hydraulic oil quantity required at the time of sudden swing motion is limited. The new hydraulic system can start the oil flow volume at the minimum level and then allow it to increase on demand. This optimum oil flow control significantly improves the fuel efficiency. Reduction in Pump Stand-by Pressure Reducing pump oil flow pressure during stand-by minimizes the load unique design on the engine. This also improves fuel consumption. Throttle knob position Engine speed Operation mode utomatic 16.0power boost 1 1,900 SP 2 1,800 H utomatic 3 1,700 4~15 1,699~900 onstant Increased Pump Efficiency Same level in fuel consumption SP SPEED PRIORITY The new modified hydraulic pump structure lowers the oil leak volume in the pump which means improved pump efficiency and improved engine fuel efficiency. H S L HEVY (Speed priority) UTO Simultaneous pursuit of speed and fuel efficiency ( ) STNDRD (Fuel priority) LIGHT/LIFT Fine operation/ ( Lifting operation ) Reduction in fuel consumption by 5% Same level in fuel consumption H (13 steps) HEVY Simultaneous pursuit of speed and fuel efficiency ( ) DJUSTMENT Ordinary operation /Fine operation /Lifting operation ( ) Working speed SH330/350-3 SH330/

5

6 Maintenance High-Performance Return Filter The hydraulic oil change interval is 5,000hours, and the return filter change interval is 2,000hours. One high performance return filter keeps the same level of filtering effect as a nephron. Hydraulic oil change : 5,000 hours Life of filter : 2,000 hours * The oil and filter change interval depends on the working conditions. EMS (Easy Maintenance System) as Standard 's new improved EMS keeps the pins and bushes fully lubricated at all times and prevents rattling. This system significantly extends the service life of the pins and bushes. The interval of greasing around the bucket is 1,000 hours, keeping the joints lubricated for a long time and extending the service life of parts by reducing abrasion and rattling. Greasing interval for other sections : 1,000 hours * The greasing interval depends on the working conditions. EMS bushing Ground Level ccess to Engine rea Improves Preventative Maintenance. Parts cleaning and maintenance are possible from the ground without climbing onto the upper structure of the excavator body. Remote fuel and oil filters fuel prefilter is provided as standard equipment to reduce the likelihood of fuel clogging. In addition, the fuel and oil filters are installed at ground-accessible locations to facilitate replacement. Solid lubricant Plated pin Dust seal The High-Performance Return Filter is made more precisely to condense the Nephron filter function. High strength brass Special bushing solid lubricant embedded in high strength brass forms a layer on the bushing surface to prevent contact between metals, maintaining an excellent lubricated state to reduce abrasion of joints. Pilot filter Oil filter Fuel prefilter (with water separator) Fuel filter (with water separator) The surface of the pin is plated to increase the surface hardness and improve the wear resistance accordingly. onventional return filter High-performance return filter Fuel Tank Stainless steel is used for the strainer that prevents dust entering during refueling. Furthermore, a maintenance hole is provided to permit easy periodical maintenance. Sections equipped with EMS bushing Precautionary use of EMS Stainless steel strainer Maintenance hole for cleaning Engine Oil Drain oupler The engine oil pan is provided with a drain coupler. This makes easier to do drain work and preventing oil from spattering with an attached drain hose. Grease is enclosed, however, greasing is necessary every 1000 hours or six months depending on the level of dusting conditions. Greasing is also necessary after any components have been submerged underwater for prolonged periods. Greasing is also recommended after use with hydraulic breakers, crushers or other high impact attachments such as Rock Saws etc. pins should be cleaned thoroughly when removing or attaching new buckets. Parallel installation of radiator and oil cooler The radiator and the oil cooler are installed in parallel, and a space is provided at the front of the inter cooler to facilitate cleaning. Oil cooler Radiator Engine maintenance steps The engine room designed to permit safe maintenance. Open-air filter of air conditioner ir cleaner attery Reserve tank Inter cooler Fuel cooler 10 11

7 Operator omfort 's Redesigned abin and Seat for Optimum Operator omfort The seat reclining system allows the operator to lay the seat flat and to rest on site without removing the headrest. Operating Positions of Sliding Seat and Tilting onsole In addition to the tilting console that is adjustable in four steps vertically, the increased sliding distance ensures optimum working conditions. Simple to Read LD Monitor and Switch Panel In addition to the monitor that is easy to read during daytime as well as nighttime by changing the backlight to white, a simple and convenient universally designed switch panel is provided. Fluid Filled ab Mounts Four fluid cab mounts reduce vibration and impact transmitted to the cabin, and improve the operators' sitting quality and reduce operator fatigue. ross section Warning message New Water-repelling Operator s Seat unique design rainwater and dust-resistant, water-repelling operator s seat has been adopted. Seat sliding distance 18m Seat frame sliding distance 160mm The Suspension Seat Eliminates Vibration ir suspension (Option) Seat height adjustment 6m 1. OVER HET 2. LTERNTOR 3. LOW FUEL 4. LOW OIL PRESSURE 5. LOW OOLNT 6. ELE.PROLEM 7. OVER LOD (option) 8. IR FILTER 9. HEK ENGINE 10. OOST TEMP. HIGH 11. HEK REKER FILTER (option) ctive condition message 1. ENG.PRE HET 2. UTO WRM UP 3. ENG.IDLING 4. POWER UP 5. ENGINE STOP Language menu Japanese English Thai hinese German French Italian Spanish Portuguese Dutch Danish Norwegian Swedish Finnish Turkish rabic Malay Indonesian (Pictograph) Flow Setting in 10 Patterns and Switching of ombined ircuit The switch panel in the cab permits setting the flow rate for work with a maximum of ten different special attachments in advance. circuit change for the breaker and crusher is also possible in the cab. Silicone oil utomatic ir onditioner with Round Outlets for Increased omfort The air outlets of the air conditioner are provided with round grills with wide adjusting angles. The efficiency of the air conditioner has been increased by pressurizing the cab to make it airtight, providing a comfortable space. ISO-compliant Pressurized ab to Prevent Dust Entry The sealed and pressurized (sealing by pressure) cab prevents entry of dust from outside. onvenient One-touch Muting of M/FM Radio unique design n M/FM radio is provided as standard equipment. The mute switch on the left lever permits onetouch muting of the radio. One-touch radio muting 12 13

8 Safety ustomer and Product Support The wide view increases the safety of work unique design In addition to the wide front view, the down-right view is also made larger to enhance the safety of work. New Gate Lock Lever and onsole Tilt-up Function The console tilt-up function permits easy entry and exit. Easy ccess to the Upper Structure large step and handrail, as well as a non-slip place, minimize the effort when climbing on and off the upper structure. Front-right large step unique design 's total commitment to product and customer support has enabled it grow into a world renowned manufacturer of hydraulic excavators. Supported by a global sales and service network of over four hundred distributors representing hydraulic excavators manufactured by, the company supply 70% of total production from Japan to all five continents. spread of over one thousand outlets offering excellent parts and service support has global coverage ensuring hydraulic excavator users have at their disposal Regional Spare Parts enters, technical repair shops and service vehicles carrying all the necessary equipment to service and repair any hydraulic excavator manufactured by. aims to produce the right products to meet all work applications and at the same time provide the highest level of more training and education to ensure complete product support quality throughout the service network in the world. Safe and Easy Entry into and Exit from the ab large handrail for easy opening/closing of the door and a non-slip plate are installed to permit the operator to get in and out of the cab easily. Non-slip plate Large handrail unique design ISO-compliant large handrail nti-theft larm System s unique anti-theft system can be activated by your distributors at the time of purchase. New non-slip plate High-rigidity abin The new cabin structure provides advanced operator protection. nti-theft alarm system Safety Equipment in case of an Emergency bout 3 times greater rigidity * s compared with SH330/350-3 Emergency stop switch 14 15

9 SH330(L)/350(L)-5 Technical Data Engine Type Rated output Maximum torque Piston displacement ore and stroke Starting system lternator Fuel tank ir filter SH330(L)-5/SH350(L)-5 ISUZU H-6HK1XYSS Water-cooled, 4-cycle,diesel, 6-cylinder in line, direct injection (electric control), turbochanger with air cooled intercooler. 202 kw 274 PS/2,00in -1 1,080 N m at 1,50in -1 7,790 cc 11m x 12m 24 V electric motor starting 24 V, liters Double element SIH:S Two variable displacement axial piston pumps, one gear pump for pilot controls and the electronic-controlled engine of SPE5 and SIH:S ( Interigent Hydraulic System) includes: three working mode (SP,H,) one-touch/automatic idling system and automatic power-boost. Hydraulic pumps Two variable displacement axial piston pumps supply power for attachment, swing and travel. SH330(L)-5/SH350(L)-5 Maximum oil flow 2 x 290 liters/min Pilot pump max.oil flow 30 liters/min Hydraulic motors For travel: Two variable displacement axial piston motors For swing: One fixed displacement axial piston motor Working circuit pressure oom/arm/bucket 34.3 Mpa(350 kgf/cm 2 ) oom/arm/bucket 37.3 Mpa(380 kgf/cm 2 )with auto power-up Swing circuit 30.4 Mpa(310 kgf/cm 2 ) Travel circuit 34.3 Mpa(350 kgf/cm 2 ) ontrol valve With boom/arm holding valve One 4-spool valve for right track travel, bucket, boom and arm acceleration One 5-spool valve for left track travel, auxiliary, swing, boom acceleration and arm Oil filtration Return filter Pilot filter Suction filter icrons 8 microns 10icrons Hydraulic cylinders SH330(L)-5/SH350(L)-5 oom rm m x 10m x 149m 17m x 12m x 1748 mm 15m x 10m x 121m Double-acting, bolt-up-type cylinder tube-end; hardened steel bushings are installed in the cylinder tube and rods ends. ab & ontrols The cab is mounted on 4 fluid mountings. Features include safety glass front, rear and side windows, reclining/sliding cloth upholstered suspension seat with headrest and armrest, cigarette lighter, pop-up skylight window, and intermittent wiper with washer. The front window slides upward for storage, and the lower front window is removable. ontrol levers are located in 4 positions with tilting control consoles. Reliable soft-touch switches are a standard feature. n easy-to-read full-dot LD monitor keeps operation in touch with critical machine functions. Swing Planetary reduction is powered by an axial piston motor. The internal ring gear with has a grease cavity for pinion. The swing bearing is a single-row shear type ball bearing. Dual stage relief valves are used for smooth swing deceleration and stops. mechanical disc swing brake is included. Swing speed Tail swing radius Swing torque SH330(L)-5/SH350(L)-5 0~9.8 rpm 3,45m 112 kn m 11,420 kgf m Undercarriage n X-style carbody is integrally welded for strength and durability. The grease cylinder track adjusters have shock absorbing springs. The undercarriage has lubricated rollers and idlers. Type of shoe: sealed link shoe Upper rollers - Heat treated, mounted on steel bushings with leaded bronze casting, sealed for lifetime lubrication. Lower rollers - Heat treated, mounted on steel bushings with leaded bronze casting, sealed for lifetime lubrication. Track adjustment - Idler axles adjusted with grease cylinder integral with each side frame; adjustment yoke mechanism fitted with heavy duty recoil spring. Number of rollers and shoes on each side /SH350-5 Upper rollers 2 Lower rollers 7 Track shoes 45 Upper rollers Lower rollers Track shoes SH330L-5/SH350L-5 Travel System Two-speed independent hydrostatic system with compact axial motors for Increased performance. Hydraulic motor powerd output shaft coupled to a planetary reduction unit and track sprocket. ll hydraulic components mounted within the width of side frame. Travel speed can be selected by switch panel. Hydraulically released disc parking brake is built each motor. Travel speed Drawbar Pull High Low SH330(L)-5/SH350(L) km/h 3.5 km/h 265 kn/264 kn Lubricant & oolant capacity SH330(L)-5/SH350(L)-5 Hydraulic system 350 liters Hydraulic oil tank 175 liters Fuel tank 580 liters ooling system 30 liters Final drive case(per side) 9.5 liters Swing drive case 7.9 liters Engine crank case (with remote oil filter) 38 liters uxiliary hydraulic system uxiliary piping type (option) rm type linkage type uxiliary hydraulic pump flow uxiliary piping type (option) rm type linkage type uxiliary hydraulic pump flow capacity (ISO/SE/PS heaped) unit:mm capacity (EE heaped) unit:mm type Number of teeth Length Length Width unit:mm Weight unit:kg ombination With side cutter Without side cutter 2.6 arm 3.2 arm 4.0 arm m 3 STD 1 74m 1 74m Suitable for materials with density up to 2,000 kg/m 3 or less Standard bucket (Suitable for materials with density up to 1,800 kg/m 3 or less) Weight & Ground Pressure Shoe type Triple grouser shoe Shoe type Triple grouser shoe Digging Force rm length digging force <with auto power up> rm digging force <with auto power up> ISO 6015 SE: PS ISO SE: PS m 1 10m kg SH330(L)-5 For reaker For Double (breaker & crusher) acting For D/ + Second option line STD STD STD with Reinforcement plate STD with Reinforcement plate 290 liters/min 580 liters/min 580 liters/min+63 liters/min SH350(L)-5 For reaker For Double (breaker & crusher) acting For D/ + Second option line STD with Reinforcement plate with Reinforcement plate with Reinforcement plate 290 liters/min 580 liters/min 580 liters/min+63 liters/min STD m 1 30m kg SH330(L) m m 1 40m 1 42m 1 31m kg STD m 1 44m kg N/ 1 74m 1 74m 1.8 m STD Suitable for materials with density up to 1,600 kg/m 3 or less Suitable for materials with density up to 1,200 kg/m 3 or less Shoe width 60m 80m Shoe width 60m 80m kn 211 kn 189 kn 205 kn m 1 60m kg N/ N/ SH330(L)-5 Operating weight kg ( kg) kg ( kg) SH350(L)-5 Operating weight kg ( kg) kg ( kg) SH330(L)-5/SH350(L) kn 248 kn 204 kn 221 kn 164 kn 178 kn 160 kn 173 kn SH350(L) m m 1 31m kg 1 73m 1 40m 1.6 m m 1 45m kg Ground pressure 67 kpa (64 kpa) 52 kpa (49 kpa) Ground pressure 72 kpa (67 kpa) 55 kpa (52 kpa) kn 152 kn 137 kn 149 kn

10 Lifting apacity Notes: 1. Ratings are based on SE J/ISO Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) located on the back of the bucket. 4. *Indicates load limited by hydraulic capacity. 5. 0m = Ground. : Radius of load : hook height : Lifting capacity Notes: 1. Ratings are based on SE J/ISO Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) located on the back of the bucket. 4. *Indicates load limited by hydraulic capacity. 5. 0m = Ground. : Radius of load : hook height : Lifting capacity Max. Radius SHOE : 600 (mm)g UKET : SE/PS 1.15 (m 3 ) RM LENGTH = 4.04 (m) MXIMUM REH = (m) OOM : 6.45 (m) Load Radius Over Front 1 9 m 8 m Min. Radius Load Radius Load Radius Load Radius Over Side Unit : kg Over Front Over Side Unit : kg SH330L-5 SHOE : 600 (mm)g RM LENGTH = 4.04 (m) OOM : 6.45 (m) UKET : SE/PS 1.15 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 3 531* * * * * * * * 4 681* * * * * * 6 493* 6 998* 7 804* * * * * * * * * * * * * * * * * * * * 6 697* 9 127* 6 697* 6 303* 9 127* 8 779* * * * * * * * * * * * * * * * * * * * * * * * * 9 527* * * * * * * * * 7 958* * * * * * * * * * * * * * * * * 4 681* 5 479* * * 6 476* 6 917* * * * * * * * * * 9 364* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 9 527* * * * * * * * 6 033* 6 493* 6 998* 8 142* 6 761* 9 183* * * * * * * 7 958* * * * * * SHOE : 600 (mm)g RM LENGTH = 3.25 (m) OOM : 6.45 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius SH330L-5 SHOE : 600 (mm)g RM LENGTH = 3.25 (m) OOM : 6.45 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 4 577* 4 627* 4 750* 4 949* * * * * * * 7 599* 8 112* * * * * 8 473* * * * * * * * * 7 202* * * 8 056* * * * * * * * * 9 776* * * * * * * * * * * * * * * * * * * * * * * * 9 239* 9 239* * * * * * * * 4 627* 4 750* 4 949* 5 238* 5 639* * 4 577* * * * * * * * * * * * * * * * * * * * * 7 202* * * * 8 056* * * * * * * * * * * * * * * * * * * * 9 239* * * * * * * 9 239* * * 7 282* 7 599* 8 473* * * * * * * * * 1.67 SHOE : 600 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius SH330L-5 SHOE : 600 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 7 898* 6 627* * * * * * * 8 614* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 6 627* 6 695* 6 871* * 8 906* * * * * * * * * * * * 9 994* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 8 137* 8 614* * * * * * *

11 Lifting apacity Notes: 1. Ratings are based on SE J/ISO Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) located on the back of the bucket. 4. *Indicates load limited by hydraulic capacity. 5. 0m = Ground. : Radius of load : hook height : Lifting capacity Notes: 1. Ratings are based on SE J/ISO Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) located on the back of the bucket. 4. *Indicates load limited by hydraulic capacity. 5. 0m = Ground. : Radius of load : hook height : Lifting capacity Max. Radius SHOE : 800 (mm)g UKET : SE/PS 1.15 (m 3 ) RM LENGTH = 4.04 (m) MXIMUM REH = (m) OOM : 6.45 (m) Load Radius Over Front 1 9 m 8 m Min. Radius Load Radius Load Radius Load Radius Over Side Unit : kg Over Front Over Side Unit : kg SH330L-5 SHOE : 800 (mm)g RM LENGTH = 4.04 (m) OOM : 6.45 (m) UKET : SE/PS 1.15 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 3 531* * * * * * * * * 4 681* * * 6 476* * * * * 6 493* 6 998* 7 804* * * * * 8 142* * * * * * * * * * * * * * * * 6 697* 9 127* 6 697* 6 303* 9 127* 8 779* * * * * * * * * * * * * * * * * * * * * * * * * 9 527* * * * * * * * * 7 958* * * * * * * * * * * * * * * * * * 4 681* 5 479* * * 6 476* 6 917* * * * * * * * * * 8 357* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 9 499* * * 9 527* * * * * * * * 6 033* 6 493* 6 998* 8 142* 6 761* 9 183* * * * * * * 7 958* * * * * * SHOE : 800 (mm)g RM LENGTH = 3.25 (m) OOM : 6.45 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius SH330L-5 SHOE : 800 (mm)g RM LENGTH = 3.25 (m) OOM : 6.45 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 4 577* 4 627* 4 750* 4 949* 5 238* * 4 577* * * * * * 7 599* 8 112* * * * * 8 473* * * * * * * * * 7 202* * * 8 056* * * * * * * * * * 9 776* * * * * * * * * * * * * * * * * * * * * * * * 9 239* 9 239* * * * * * * * 4 627* 4 750* 4 949* 5 238* 5 639* 6 192* * 4 577* * * * * * * * * * * 8 549* * * * * * * * * * * * 7 202* * * * * 8 056* * * * * * * * * * * * * * * * * * * * * 9 239* * * * * * * 9 239* * * 7 282* 7 599* 8 473* * * * * * * * * 1.67 SHOE : 800 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius SH330L-5 SHOE : 800 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 7 898* 6 627* * * * * * * 8 614* * 9 353* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 6 627* 6 695* 6 871* * 8 906* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 8 137* 8 614* * * * * * *

12 Lifting apacity Notes: 1. Ratings are based on SE J/ISO Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) located on the back of the bucket. 4. *Indicates load limited by hydraulic capacity. 5. 0m = Ground. : Radius of load : hook height : Lifting capacity Notes: 1. Ratings are based on SE J/ISO Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) located on the back of the bucket. 4. *Indicates load limited by hydraulic capacity. 5. 0m = Ground. : Radius of load : hook height : Lifting capacity Load Radius Over Front Load Radius Load Radius Load Radius Over Side Unit : kg Over Front Over Side Unit : kg SH350-5 SHOE Max. Radius : 600 (mm)g UKET : SE/PS 1.4 (m 3 ) RM LENGTH = 3.25 (m) MXIMUM REH = (m) OOM : 6.45 (m) 1 9 m 8 m Min. Radius SH350-5 SHOE : 800 (mm)g RM LENGTH = 3.25 (m) OOM : 6.45 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 4 573* 4 252* 4 302* 4 426* 4 626* 4 915* * 8 059* 4 573* 4 252* * 5 462* * 5 558* 6 916* * * * * * * * 6 836* 7 148* 8 010* * * * * * * * * 8 946* * * * * 6 875* 6 520* * * * 7 729* 5 724* * * * * * * 9 717* 7 824* 9 717* 9 451* * * * * * * * * * * * * * * * * * * * 9 625* * * * * * 8 593* 8 593* * * * 6 836* 7 148* 8 010* * 8 946* 6 520* 5 724* 7 824* * * * * * * * 4 252* 4 302* 4 426* 4 626* 4 915* 5 316* * 8 059* 4 573* 4 252* * 5 462* * 5 558* 6 916* * * * * * * * 6 836* 7 148* 8 010* * * * * * * * * 8 946* * * * * 6 875* 6 520* * * * 7 729* 5 724* * * * * * * * 9 451* * * * * * * * * * * * * * * * * * * * * 9 625* * * * * * * 8 593* 8 593* * * * 6 836* 7 148* 8 010* * 8 946* 6 520* 5 724* 7 824* * * * * * * 1.67 SH350-5 SHOE : 600 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius SH350-5 SHOE : 800 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) Max. Radius 1 9 m 8 m Min. Radius 7 587* 6 315* 6 382* * 8 332* * * * * * * 9 117* 7 711* 8 181* 9 686* 8 874* * * * * * * * * * * * * * * * * * 9 345* 8 698* * * * * * * * * * * * * * * * * * * * * * * * * * * * 8 181* 9 686* * * * 9 345* 8 698* * * * * * * 6 315* 6 382* * 8 332* * * * * * * 9 117* 7 711* 8 181* 9 686* 8 874* * * * * * 9 492* * * * * * * * * * * * * * * * * 8 698* * * * * * * * * * * * * * * * * * * * * * * * * * * * * 8 181* 9 686* * * * 9 345* 8 698* * * * * * SH350L-5 SHOE Max. Radius : 600 (mm)g RM LENGTH = 3.25 (m) OOM : 6.45 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH350L-5 SHOE Max. Radius : 600 (mm)g RM LENGTH = 2.63 (m) OOM : 6.45 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius 4 573* 4 252* 4 302* 4 426* 4 626* 4 915* 5 316* 5 871* * 8 442* 8 059* 4 573* 4 252* * 5 462* 7 008* * 5 558* 6 916* * * * * * * * 8 037* * * * * * * * * * * * * 6 875* * * * * * 7 729* * * * * * * * * * * * * * * * * * * 9 368* * * 9 625* * 8 593* * * * * * * * 8 593* * * 6 836* 7 148* 8 010* * 8 946* 6 520* 5 724* 7 824* 9 762* * * * * * 6 836* 7 148* 8 010* * 8 946* 6 520* 5 724* 7 824* * * * * * * * 6 315* 6 382* 6 558* * 8 646* 8 332* * * * * * * 9 117* 8 096* * * * * * * * 9 492* * * * * * * * * * * * * * * * * * * * * * * 9 843* * * * * * * * * * * * * * * * * 7 711* 8 181* 9 686* * * * 9 345* 8 698* * * * * * * 8 181* 9 686* * * * 9 345* 8 698* * * * * *

13 Working Range rm length oom length Max digging radius Max digging depth Max digging height D Max dumping height E Max vertical wall cut depth F Min. front swing radius G Rear end swing radius m 6 73m 10 32m 7 14m 5 97m 4 63m SH330(L) m 7 34m 10 37m 7 23m 6 35m 4 50m 3 45m m 8 14m 10 67m 7 54m 7 15m 4 56m D F G Standard equipment [Hydraulic system] SIH:S hydraulic system Operation mode (SP, H and mode) uto/one-touch idling utomatic 2-speed travel utomatic power boost rm/boom/bucket reactivation circuit utomatic swing parking system High-performance return filter [Safety equipment] Rearview mirror (left/right) Emergency escape tool Winding seat belt Gate lock lever Travel alarm (with on and off switch) nti-theft alarm system Engine room firewall Fan guard Engine emergency stop switch ccessories (option) ab-top light Front guard (OPG level 1) Rain reflector Head guard for SH350 (FOPS level 2) Principle Specifications Others Performance Hydraulic System Engine ase rm length oom length Max digging radius Max digging depth Max digging height D Max dumping height E Max vertical wall cut depth F Min. front swing radius G Rear end swing radius oom length rm length capacity (ISO heaped) Std. operating weight Make & model Rated output Displacement Main pump Max pressure /with auto power boost Travel motor Parking brake type Swing motor Travel speed Traction force Grade ability Ground pressure Swing speed digging force /with power boost rm digging force /with power boost Fuel tank Hydraulic fluid tank SH350(L) m 11 17m 6 73m 7 34m 10 32m 10 37m 7 14m 7 23m 5 97m 6 35m 4 63m 4 50m 3 45m STD Specifications kg 265 kn 67 kpa SH330L-5 STD Specifications 265 kn 64 kpa E SH350-5 SH350L-5 STD Specifications STD Specifications 6.4 ( type) 3.2 ( type) ( type) kg kg kg ISUZU H-6HK1XYSS 202 kw/2 00in l(cc) 2 variable displacement axial piston pumps with regulating system 34.3 Mpa 37.3 Mpa Variable displacement axial piston motor Mechanical disc brake Fixed displacement axial piston motor 5.5/3.5 km/h 70% <35 > 9.8 min kn 248 kn 164 kn 178 kn 580 liter 350 liter 264 kn 72 kpa 264 kn 67 kpa [ab/interior equipment] Tilting console Open air introducing pressurized full-automatic air conditioner Defroster Hot & cool box Water-repelling operator s seat Seat suspension Rise-up wiper (with intermittent operation function) up holder M/FM radio (with muting function) lock Magazine rack ccessory case Floor mat rmrest & headrest shtray & cigar lighter Room light (uto-off function) oat hook [Others] EMS Long-life hydraulic oil Two lights (main unit and left of arm) Fuel filter (with water separator) Fuel prefilter (with water separator) Double-element air cleaner Grease-enclosed track link rattling control mechanism Large tool box set of tools 12V power (D-D converter) ir suspension (K seat) Polycarbonate with sunshade roof top window Full track guard Re-fuel Pump Pre-cleaner Hose burst check valve (for arm/boom cylinder) Lower window guard 24 25

14 Dimensions oom rm K J L F I D E G H O M N P ounter weight rm length Overall length Length from center of machine (to arm top) Upper structure rear end radius D enter to center of wheels E Overall track length F Overall height G learance height under upper structure H Shoe lug height I ab height J Upper structure overall width K Width from center of machine (left side) L Width from center of machine (right side) M Track gauge N Overall width O Std. Shoe width P Minimum ground clearance rm length Overall length Length from center of machine (to arm top) Upper structure rear end radius D enter to center of wheels E Overall track length F Overall height G learance height under upper structure H Shoe lug height I ab height J Upper structure overall width K Width from center of machine (left side) L Width from center of machine (right side) M Track gauge N Overall width O Std. Shoe width P Minimum ground clearance m 7 71m 3 50m m 7 71m 3 50m m 7 63m 3 72m 4 65m 3 26m SH m 4 65m m 11 13m 7 67m 7 71m 3 45m 3 48m 3 50m 1 21m 3m 3 13m 3 02m 1 53m 1 49m 2 60m 3 20m 60m 48m m 11 13m 7 63m 7 71m 3 45m 3 26m 1 21m 3m 3 13m 3 12m 1 56m 1 56m 2 60m 3 20m 60m 48m 3 50m SH330L m 7 63m 4 04m 4 98m 3 26m SH350L m 4 98m m 7 67m 3 48m m 7 63m 3 26m oom Width Weight capacity (ISO/SE/PS heaped) unit:mm With side cutter Width unit:mm Without side cutter Weight unit:kg ounter Weight Weight SH330(L)-5 SH350(L) m 86m kg kg rm Type Width Weight m kg SH330(L) m SH330(L) kg SH330(L) STD 1 08m 39m kg m kg 2 99m 1 19m 62m 1.8 m SH350(L) m 1 08m 39m kg kg SH350(L) m SH350(L) kg m