SH330-5/SH330LC-5/SH350HD-5/SH350LHD-5 Hydraulic Excavator

Transcription

1 /SH330L-/SH30-/SH30L- Hydraulic Excavator Engine Rated Power(Net) : 202 kw 274 PS Operating weight : 33,400 34,100 kg SH330L- 34,000 34,800 kg SH30-3,600 36,300 kg SH30L- 36,100 36,900 kg apacity(iso heaped) : m Naganumahara-cho, Inage-ku,hiba, Japan For further information please contact: Phone : Facsimile : We are constantly improving our products and therefore reserve the right to change designs and specifications without notice.illustrations may include optional equipment and accessories and may not include all standard equipment. at. No T.SH330/ Printed in Japan

2 SH330(L)/30(L)- Technical Data Engine Type Rated output Maximum torque Piston displacement ore and stroke Starting system lternator Fuel tank ir filter SH330(L)-/SH30(L)- ISUZU H-6HK1XYSS Water-cooled, 4-cycle,diesel, 6-cylinder in line, direct injection (electric control), turbochanger with air cooled intercooler. 202 kw 274 PS/2,00in -1 1,080 N m at 1,0in -1 7,790 cc 11m x 12m 24 V electric motor starting 24 V, 0 80 liters Double element SIH:S Two variable displacement axial piston pumps, one gear pump for pilot controls and the electronic-controlled engine of SPE and SIH:S (SUMITOMO Interigent Hydraulic System) includes: three working mode (SP,H,) one-touch/automatic idling system and automatic power-boost. Hydraulic pumps Two variable displacement axial piston pumps supply power for attachment, swing and travel. SH330(L)-/SH30(L)- Maximum oil flow 2 x 290 liters/min Pilot pump max.oil flow 30 liters/min Hydraulic motors For travel: Two variable displacement axial piston motors For swing: One fixed displacement axial piston motor Working circuit pressure oom/arm/bucket 34.3 Mpa(30 kgf/cm 2 ) oom/arm/bucket 37.3 Mpa(380 kgf/cm 2 )with auto power-up Swing circuit 30.4 Mpa(310 kgf/cm 2 ) Travel circuit 34.3 Mpa(30 kgf/cm 2 ) ontrol valve With boom/arm holding valve One 4-spool valve for right track travel, bucket, boom and arm acceleration One -spool valve for left track travel, auxiliary, swing, boom acceleration and arm Oil filtration Return filter Pilot filter Suction filter icrons 8 microns 10icrons Hydraulic cylinders SH330(L)-/SH30(L)- oom rm m x 10m x 149m 17m x 12m x 1748 mm 1m x 10m x 121m Double-acting, bolt-up-type cylinder tube-end; hardened steel bushings are installed in the cylinder tube and rods ends. ab & ontrols The cab is mounted on 4 fluid mountings. Features include safety glass front, rear and side windows, reclining/sliding cloth upholstered suspension seat with headrest and armrest, cigarette lighter, pop-up skylight window, and intermittent wiper with washer. The front window slides upward for storage, and the lower front window is removable. ontrol levers are located in 4 positions with tilting control consoles. Reliable soft-touch switches are a standard feature. n easy-to-read full-dot LD monitor keeps operation in touch with critical machine functions. Swing Planetary reduction is powered by an axial piston motor. The internal ring gear with has a grease cavity for pinion. The swing bearing is a single-row shear type ball bearing. Dual stage relief valves are used for smooth swing deceleration and stops. mechanical disc swing brake is included. Swing speed Tail swing radius Swing torque SH330(L)-/SH30(L)- 0~9.8 rpm 3,4m 112 kn m 11,420 kgf m Undercarriage n X-style carbody is integrally welded for strength and durability. The grease cylinder track adjusters have shock absorbing springs. The undercarriage has lubricated rollers and idlers. Type of shoe: sealed link shoe Upper rollers - Heat treated, mounted on steel bushings with leaded bronze casting, sealed for lifetime lubrication. Lower rollers - Heat treated, mounted on steel bushings with leaded bronze casting, sealed for lifetime lubrication. Track adjustment - Idler axles adjusted with grease cylinder integral with each side frame; adjustment yoke mechanism fitted with heavy duty recoil spring. Number of rollers and shoes on each side /SH30- Upper rollers 2 Lower rollers 7 Track shoes 4 Upper rollers Lower rollers Track shoes SH330L-/SH30L- Travel System Two-speed independent hydrostatic system with compact axial motors for Increased performance. Hydraulic motor powerd output shaft coupled to a planetary reduction unit and track sprocket. ll hydraulic components mounted within the width of side frame. Travel speed can be selected by switch panel. Hydraulically released disc parking brake is built each motor. Travel speed Drawbar Pull High Low SH330(L)-/SH30(L)-. km/h 3. km/h 26 kn/264 kn Lubricant & oolant capacity SH330(L)-/SH30(L)- Hydraulic system 30 liters Hydraulic oil tank 17 liters Fuel tank 80 liters ooling system 30 liters Final drive case(per side) 9. liters Swing drive case 7.9 liters Engine crank case (with remote oil filter) 38 liters uxiliary hydraulic system uxiliary piping type (option) rm type linkage type uxiliary hydraulic pump flow uxiliary piping type (option) rm type linkage type uxiliary hydraulic pump flow capacity (ISO/SE/PS heaped) unit:mm capacity (EE heaped) unit:mm type Number of teeth Length Length Width unit:mm Weight unit:kg ombination With side cutter Without side cutter 2.6 arm 3.2 arm 4.0 arm m m 1 74m Suitable for materials with density up to 2,000 kg/m 3 or less Standard bucket (Suitable for materials with density up to 1,800 kg/m 3 or less) Weight & Ground Pressure Shoe type Triple grouser shoe Shoe type Triple grouser shoe Digging Force rm length digging force <with auto power up> rm digging force <with auto power up> ISO 601 SE: PS ISO SE: PS m 1 10m 1 04 kg SH330(L)- For reaker For Double (breaker & crusher) acting For D/ + Second option line with Reinforcement plate with Reinforcement plate 290 liters/min 80 liters/min 80 liters/min+63 liters/min SH30(L)- For reaker For Double (breaker & crusher) acting For D/ + Second option line with Reinforcement plate with Reinforcement plate with Reinforcement plate 290 liters/min 80 liters/min 80 liters/min+63 liters/min m 1 30m kg SH330(L)- 1.4 m m 1 40m 1 42m 1 31m 1 00 kg m 1 44m kg N/ 1 74m 1 74m 1.8 m Suitable for materials with density up to 1,600 kg/m 3 or less Suitable for materials with density up to 1,200 kg/m 3 or less Shoe width 60m 80m Shoe width 60m 80m kn 211 kn 189 kn 20 kn 1 73m 1 60m kg N/ N/ SH330(L)- Operating weight kg ( kg) kg ( kg) SH30(L)- Operating weight kg ( kg) kg ( kg) SH330(L)-/SH30(L) kn 248 kn 204 kn 221 kn 164 kn 178 kn 160 kn 173 kn SH30(L)- 1.4 m m 1 31m 1 00 kg 1 73m 1 40m 1.6 m m 1 4m 1 7 kg Ground pressure 67 kpa (64 kpa) 2 kpa (49 kpa) Ground pressure 72 kpa (67 kpa) kpa (2 kpa) kn 12 kn 137 kn 149 kn

3 Lifting apacity Notes: 1. Ratings are based on SE J/ISO 1067 : Radius of load : hook height : Lifting capacity Notes: 1. Ratings are based on SE J/ISO 1067 : Radius of load : hook height : Lifting capacity SHOE UKET : SE/PS 1.1 (m 3 ) RM LENGTH = 4.04 (m) MXIMUM REH = (m) OOM : 6.4 (m) Over Front 1 9 m 8 m Min. Radius Over Side Unit : kg Over Front Over Side Unit : kg SH330L- SHOE RM LENGTH = 4.04 (m) OOM : 6.4 (m) UKET : SE/PS 1.1 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * * * * * * * * * * * * * * 1 271* * * * * * * 11 20* * * * 6 697* 9 127* 6 697* 6 303* 9 127* 8 779* * * * 1 674* * * * * * * * * * * * * * * * * * * * * 9 27* * * * * * * * 7 98* 10 41* 13 07* 1 933* * * * * * * 6 476* 6 917* * * * * * * * * * 9 364* * * * * 1 271* * * * * * * * * * * * 11 20* * * * * * 1 674* * * * * * * * 9 27* * * * * * * * 6 761* 9 183* 11 7* 14 4* * * * * 7 98* 10 41* 13 07* 1 933* SHOE RM LENGTH = 3.2 (m) OOM : 6.4 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH330L- SHOE RM LENGTH = 3.2 (m) OOM : 6.4 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * * * * * * 8 112* * * * * * * * * * * * * 7 202* * * 8 06* * * * * * * * * 9 776* * * * * * * * * 21 10* * * * * * * 21 14* 21 14* 20 6* * * * * * 9 239* 9 239* * * * 12 48* 1 736* * 238* 639* * * * * * * * * * * * * * * * * * * * * 7 202* * * * 8 06* * * * * * * * * * * * * * * 21 10* * * * * 9 239* * * * * * * 9 239* * * 7 99* * 13 47* * * * 12 48* 1 736* SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH330L- SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * * * * * * * 1 1* * * * * * * * * * * * 18 88* * * * * * * 19 74* 19 74* * * * * * * * 12 89* 1 242* 1 242* * 6 871* * * * * * * * * * * * 1 1* 9 994* * * * * * * * * * * * * * * * * * * 18 88* * * * * * * * * * * 12 89* 1 242* 1 242* * *

4 Lifting apacity Notes: 1. Ratings are based on SE J/ISO 1067 : Radius of load : hook height : Lifting capacity Notes: 1. Ratings are based on SE J/ISO 1067 : Radius of load : hook height : Lifting capacity SHOE UKET : SE/PS 1.1 (m 3 ) RM LENGTH = 4.04 (m) MXIMUM REH = (m) OOM : 6.4 (m) Over Front 1 9 m 8 m Min. Radius Over Side Unit : kg Over Front Over Side Unit : kg SH330L- SHOE RM LENGTH = 4.04 (m) OOM : 6.4 (m) UKET : SE/PS 1.1 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * * * 6 476* * * * * * * * * * * * * 1 271* * * * * * * 11 20* * * * 6 697* 9 127* 6 697* 6 303* 9 127* 8 779* * * * 1 674* * * * * * * * * * * * * * * * * * * * * 9 27* * * * * * * * 7 98* 10 41* 13 07* 1 933* * * * * * * * 6 476* 6 917* * * * * * * * * * 8 37* * * * * * 1 271* * * * * * * * * * * 11 20* * * * * * * * * * 1 674* * * * * * * 9 499* * * 9 27* * * * * * * * 6 761* 9 183* 11 7* 14 4* * * * * 7 98* 10 41* 13 07* 1 933* SHOE RM LENGTH = 3.2 (m) OOM : 6.4 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH330L- SHOE RM LENGTH = 3.2 (m) OOM : 6.4 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * 238* * * * * * 8 112* * * * * * * * * * * * * 7 202* * * 8 06* * * * * * * * * * 9 776* * * * * * * * * 21 10* * * * * * * 21 14* 21 14* 20 6* * * * * * 9 239* 9 239* * * * 12 48* 1 736* * 238* 639* 6 192* * * * * * * * * * * 8 49* * * * * * * * * * * * 7 202* * * * * 8 06* * * * * * * * * * * * * * * * 21 10* * * * * 9 239* * * * * * * 9 239* * * 7 99* * 13 47* * * * 12 48* 1 736* SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH330L- SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * * * * * * * * 1 1* * * * * * * * * * * * 18 88* * * * * * * 19 74* 19 74* * * * * * * * 12 89* 1 242* 1 242* * 6 871* * * * * * * * * * * * * 1 1* * * * * * * * * * * * * * * * * * * 18 88* * * * * * * * * * * * * 12 89* 1 242* 1 242* * *

5 Lifting apacity Notes: 1. Ratings are based on SE J/ISO 1067 : Radius of load : hook height : Lifting capacity Notes: 1. Ratings are based on SE J/ISO 1067 : Radius of load : hook height : Lifting capacity Over Front Over Side Unit : kg Over Front Over Side Unit : kg SH30- SHOE UKET : SE/PS 1.4 (m 3 ) RM LENGTH = 3.2 (m) MXIMUM REH = (m) OOM : 6.4 (m) 1 9 m 8 m Min. Radius SH30- SHOE RM LENGTH = 3.2 (m) OOM : 6.4 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * 4 426* 4 626* 4 91* * * * 8* 6 916* * * * * * * * * * * * 16 01* * * * * * * 6 87* * * * 7 729* * * * * * 13 43* 9 717* 9 717* 9 41* * * * * * * 12 84* * * * * * * * * * 20 82* 20 82* * 9 62* * * * * 8 93* 8 93* * * 10 28* * 1 409* * * 4 426* 4 626* 4 91* 316* * * * 8* 6 916* * * * * * * * * * * * 16 01* * * * * * * 6 87* * * * 7 729* * * * * * 13 43* * * * * * * * * 12 84* * * * * * * * * * 20 82* 20 82* * 9 62* * * 14 40* * * 8 93* 8 93* * * 10 28* * 1 409* * SH30- SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH30- SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * 6 31* 6 382* * 8 332* * * * * * * 9 117* 8 874* * * * 1 003* * * * * * * * * * * * * * * * * * * * * 19 26* 19 26* 18 84* 10 47* * * * * * * * * * * * * 6 31* 6 382* * 8 332* * * * * * * 9 117* 8 874* * * * 1 003* 1 003* 9 492* * * 11 14* * * * * * * * * * * * * * * * * * * * 19 26* 19 26* 18 84* 10 47* * * * * * * * * * * * * SH30L- SHOE RM LENGTH = 3.2 (m) OOM : 6.4 (m) UKET : SE/PS 1.4 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius SH30L- SHOE RM LENGTH = 2.63 (m) OOM : 6.4 (m) UKET : SE/PS 1.6 (m 3 ) MXIMUM REH = (m) 1 9 m 8 m Min. Radius * 4 426* 4 626* 4 91* 316* 871* * 8 442* * 7 008* * 8* 6 916* * * * * * * * 8 037* * * * * 16 01* * * * * * * * 6 87* * * * * * 7 729* * * * * * * * * * 13 43* * * * * * * * * 9 368* * * 9 62* * 8 93* * * * * 14 40* * * 8 93* * * 9 762* * 16 83* 20 90* 10 28* * 1 409* * * 6 31* 6 382* 6 8* * 8 646* 8 332* * * * * * * 9 117* 8 096* * * * * * 1 003* 1 003* 9 492* * * * 1 74* * * * * * * * * * * * * * * * * * * 9 843* * * 10 47* * * * * * * * * * * * * * * * * * 22 23

6 Working Range rm length oom length Max digging radius Max digging depth Max digging height D Max dumping height E Max vertical wall cut depth F Min. front swing radius G Rear end swing radius m 6 73m 10 32m 7 14m 97m 4 63m SH330(L) m 7 34m 10 37m 7 23m 6 3m 4 0m 3 4m m 8 14m 10 67m 7 4m 7 1m 4 6m D F G Standard equipment [Hydraulic system] SIH:S hydraulic system Operation mode (SP, H and mode) uto/one-touch idling utomatic 2-speed travel utomatic power boost rm/boom/bucket reactivation circuit utomatic swing parking system High-performance return filter [Safety equipment] Rearview mirror (left/right) Emergency escape tool Winding seat belt Gate lock lever Travel alarm (with on and off switch) nti-theft alarm system Engine room firewall Fan guard Engine emergency stop switch ccessories (option) ab-top light Front guard (OPG level 1) Rain reflector Head guard for SH30 (FOPS level 2) Principle Specifications Others Performance Hydraulic System Engine ase rm length oom length Max digging radius Max digging depth Max digging height D Max dumping height E Max vertical wall cut depth F Min. front swing radius G Rear end swing radius oom length rm length capacity (ISO heaped) Std. operating weight Make & model Rated output Displacement Main pump Max pressure /with auto power boost Travel motor Parking brake type Swing motor Travel speed Traction force Grade ability Ground pressure Swing speed digging force /with power boost rm digging force /with power boost Fuel tank Hydraulic fluid tank SH30(L) m 11 17m 6 73m 7 34m 10 32m 10 37m 7 14m 7 23m 97m 6 3m 4 63m 4 0m 3 4m Specifications kg 26 kn 67 kpa SH330L- Specifications 26 kn 64 kpa E SH30- SH30L- Specifications Specifications 6.4 ( type) 3.2 ( type) ( type) kg kg kg ISUZU H-6HK1XYSS 202 kw/2 00in l(cc) 2 variable displacement axial piston pumps with regulating system 34.3 Mpa 37.3 Mpa Variable displacement axial piston motor Mechanical disc brake Fixed displacement axial piston motor./3. km/h 70% <3 > 9.8 min kn 248 kn 164 kn 178 kn 80 liter 30 liter 264 kn 72 kpa 264 kn 67 kpa [ab/interior equipment] Tilting console Open air introducing pressurized full-automatic air conditioner Defroster Hot & cool box Water-repelling operator s seat Seat suspension Rise-up wiper (with intermittent operation function) up holder M/FM radio (with muting function) lock Magazine rack ccessory case Floor mat rmrest & headrest shtray & cigar lighter Room light (uto-off function) oat hook [Others] EMS Long-life hydraulic oil Two lights (main unit and left of arm) Fuel filter (with water separator) Fuel prefilter (with water separator) Double-element air cleaner Grease-enclosed track link rattling control mechanism Large tool box set of tools 12V power (D-D converter) ir suspension (K seat) Polycarbonate with sunshade roof top window Full track guard Re-fuel Pump Pre-cleaner Hose burst check valve (for arm/boom cylinder) Lower window guard 24 2

7 Dimensions oom rm K J L F I D E G H O M N P ounter weight rm length Overall length Length from center of machine (to arm top) Upper structure rear end radius D enter to center of wheels E Overall track length F Overall height G learance height under upper structure H Shoe lug height I ab height J Upper structure overall width K Width from center of machine (left side) L Width from center of machine (right side) M Track gauge N Overall width O Std. Shoe width P Minimum ground clearance rm length Overall length Length from center of machine (to arm top) Upper structure rear end radius D enter to center of wheels E Overall track length F Overall height G learance height under upper structure H Shoe lug height I ab height J Upper structure overall width K Width from center of machine (left side) L Width from center of machine (right side) M Track gauge N Overall width O Std. Shoe width P Minimum ground clearance m 7 71m 3 0m m 7 71m 3 0m m 7 63m 3 72m 4 6m 3 26m SH m 4 6m m 11 13m 7 67m 7 71m 3 4m 3 48m 3 0m 1 21m 3m 3 13m 3 02m 1 3m 1 49m 2 60m 3 20m 60m 48m m 11 13m 7 63m 7 71m 3 4m 3 26m 1 21m 3m 3 13m 3 12m 1 6m 1 6m 2 60m 3 20m 60m 48m 3 0m SH330L m 7 63m 4 04m 4 98m 3 26m SH30L- 4 04m 4 98m m 7 67m 3 48m m 7 63m 3 26m oom Width Weight capacity (ISO/SE/PS heaped) unit:mm With side cutter Width unit:mm Without side cutter Weight unit:kg ounter Weight Weight SH330(L)- SH30(L) m 86m kg kg rm Type Width Weight m kg SH330(L)- 1.4 m SH330(L) kg SH330(L) m 39m 1 80 kg m 2 13 kg 2 99m 1 19m 62m 1.8 m SH30(L) m 1 08m 39m kg kg SH30(L)- 1.4 m SH30(L) kg m