HITACHI ZAXIS210. engine rated power 108 kw / 147 HP. operating weight kg

Transcription

1 HITHI ZXIS210 engine rated power 108 kw / 147 HP operating weight kg bucket capacity PS heaped : m 3 EE heaped : m 3

2 EQUIPMENT Engine Upper structure Model Isuzu -6BG1T Type cycle water-cooled, direct injection spiration Turbocharged, intercooled No. of cylinders Rated power DIN 6271, net..... H/P mode: 110 kw (150 PS) at min -1 (rpm) P mode: 103 kw (140 PS) at min -1 (rpm) SE J1349, net... H/P mode: 108 kw (147 HP) at min -1 (rpm) P mode: 101 kw (137 HP) at min -1 (rpm) Maximum torque Nm (56 kgf/m) at min -1 (rpm) Piston Displacement l Bore and stroke mm x 125 mm Batteries x 12 V / 97 h Governor Mechanical speed control with stepping motor Hydraulic system Work mode selector Digging mode / ttachment mode Engine speed sensing system Main pumps variable displacement axial piston pumps Maximum oil flow x 194 l/min Pilot pump gear pump Maximum oil flow l/min HYDRULI MOTORS Travel variable displacement axial piston motors Swing axial piston motor RELIEF VLVE SETTINGS Implement circuit MPa (350 kgf/cm 2 ) Swing circuit MPa (310 kgf/cm 2 ) Travel circuit MPa (350 kgf/cm 2 ) Pilot circuit MPa (40 kgf/cm 2 ) Power boost MPa (370 kgf/cm 2 ) HYDRULI YLINDERS High-strength piston rods and tubes. ylinder cushion mechanisms provided in boom and arm cylinders to absorb shock at stroke ends. DIMENSIONS Quantity Bore Rod dia Boom mm 85 mm rm mm 95 mm Bucket mm 80 mm HYDRULI FILTERS Hydraulic circuits use high-quality hydraulic filters. suction filter is incorporated in the suction line, and full-flow filters in the return line and swing/travel motor drain lines. REVOLVING FRME Welded sturdy box construction, using heavy-gauge steel plates for ruggedness. Reinforce frame for resistance to deformation. SWING MEHNISM xial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with inductionhardened internal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type. Swing speed min -1 (rpm) OPERTOR'S BIN Independent spacious cabin, mm wide by mm high, conforming to ISO standards. Reinforced glass windows on 4 sides for visibility. Front windows (upper and lower) can be opened. Reclining seat with armrests; adjustable with or without control levers. Undercarriage TRKS Tractor-type undercarriage. Welded track frame using selected materials. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals. Track shoes with triple grousers made of induction-hardened rolled alloy. Flat and triangular shoes are also available. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs. NUMBERS OF ROLLERS ND SHOES ON EH SIDE Upper rollers Lower rollers : ZXIS210 / 210N 8: ZXIS210L Track shoes : ZXIS210 / 210N 49: ZXIS210L Track guard : ZXIS210 / 210N 2: ZXIS210L TRTION DEVIE Each track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replaceable. Parking brake is spring-set/hydraulic-released disc type. Travel shockless relief valve built in travel motor absorbs shocks when stopping travel. utomatic transmission system: High-Low. Travel speeds High: 0 to 5.5 km/h Low: 0 to 3.6 km/h Maximum traction force kn ( kgf) Gradeability (70%) continuous ontrols Pilot controls. Hitachi's original shockless valve and quick warm-up system built in the pilot circuit. Hydraulic warm-up control system for engine and hydraulic oil. Implement levers Travel levers with pedals

3 EQUIPMENT Weights and ground pressure ZXIS210 / 210L WITH MONOBLOK BOOM: Equipped with 5.6 monoblock boom, 2.91 m arm and 0.80 m 3 (PS heaped) bucket. Shoe type Shoe Operating Ground pressure width weight Triple grouser 600 mm kg 44 kpa (0.45 kgf/cm 2 ) Triple grouser 600 mm kg 42 kpa (0.43 kgf/cm 2 ) Triple grouser 700 mm kg 38 kpa (0.39 kgf/cm 2 ) Triple grouser 700 mm kg 36 kpa (0.37 kgf/cm 2 ) Triple grouser 800 mm kg 34 kpa (0.35 kgf/cm 2 ) Triple grouser 800 mm kg 32 kpa (0.33 kgf/cm 2 ) Triple grouser 900 mm kg 30 kpa (0.31 kgf/cm 2 ) Triple grouser 900 mm kg 29 kpa (0.30 kgf/cm 2 ) Flat 600 mm kg 45 kpa (0.46 kgf/cm 2 ) Flat 600 mm kg 43 kpa (0.44 kgf/cm 2 ) ZXIS210N (NRROW TYPE UNDERRRIGE) WITH MONOBLOK BOOM: Equipped with 5.6 monoblock boom, 2.91 m arm and 0.80 m 3 (PS heaped) bucket. Shoe type Shoe Operating Ground pressure width weight Triple grouser 500 mm kg 55 kpa (0.56 kgf/cm 2 ) Triple grouser 600 mm kg 47 kpa (0.48 kgf/cm 2 ) Triple grouser 700 mm kg 40 kpa (0.41 kgf/cm 2 ) Flat 600 mm kg 48 kpa (0.49 kgf/cm 2 ) ZXIS210 / 210L WITH 2-PIEE BOOM: Equipped with 2-piece boom, 2.03 m arm and 0.80 m 3 (PS heaped) bucket. ZXIS210N (NRROW TYPE UNDERRRIGE) WITH 2-PIEE BOOM: Equipped with 2-piece boom, 2.91 m arm and 0.80 m 3 (PS heaped) bucket. Shoe type Shoe Operating Ground pressure width weight Triple grouser 500 mm kg 57 kpa (0.58 kgf/cm 2 ) Triple grouser 600 mm kg 48 kpa (0.49 kgf/cm 2 ) Triple grouser 700 mm kg 42 kpa (0.43 kgf/cm 2 ) Flat 600 mm kg 50 kpa (0.51 kgf/cm 2 ) Figures in are data on the ZXIS210L. Weights of the basic machines [including kg (ZXIS210 / 210L), kg (ZXIS210N), counterweight and triple grouser shoes, excluding front-end attachment, fuel, hydraulic oil, engine oil and coolant etc.] are: ZXIS kg with 600 mm shoes ZXIS210L kg with 600 mm shoes ZXIS210N kg with 500 mm shoes Service refill capacities Fuel tank ZXIS210(L) l ZXIS210N l Engine coolant l Engine oil l Swing mechanism l Travel final device l (each side) Hydraulic system l Hydraulic tank l Shoe type Shoe Operating Ground pressure width weight Triple grouser 600 mm kg 45 kpa (0.46 kgf/cm 2 ) Triple grouser 600 mm kg 43 kpa (0.44 kgf/cm 2 ) Triple grouser 700 mm kg 39 kpa (0.40 kgf/cm 2 ) Triple grouser 700 mm kg 37 kpa (0.38 kgf/cm 2 ) Triple grouser 800 mm kg 35 kpa (0.36 kgf/cm 2 ) Triple grouser 800 mm kg 33 kpa (0.34 kgf/cm 2 ) Triple grouser 900 mm kg 31 kpa (0.32 kgf/cm 2 ) Triple grouser 900 mm kg 30 kpa (0.31 kgf/cm 2 ) Flat 600 mm kg 47 kpa (0.48 kgf/cm 2 ) Flat 600 mm kg 45 kpa (0.46 kgf/cm 2 ) Backhoe attachments Boom and arms are of welded, box-section design. 5.6 monoblock boom, 2-piece boom and 2.03 m, 2.42 m, 2.91 m and 3.51 m arms are available. Bucket is of welded steel structure. BUKETS apacity Width Weight PS heaped Without side cutters 0.56 m mm 498 kg mm 548 kg 0.90 m mm 608 kg 1.02 m mm 658 kg 1.13 m mm 688 kg 1.25 m mm 718 kg 3

4 SPEIFITIONS Dimensions: Monoblock boom K L E D / D F M I G H J N B ZXIS210 ZXIS210L ZXIS210N Sprocket centre to idler centre B Undercarriage length * ounterweight clearance D Rear-end swing radius D Rear-end length E Overall width of upper structure F Overall of cabin *G Min. ground clearance H Track gauge I Track shoe width G 600 G 600 G 500 J Undercarriage width K Overall width L Overall length With 2.03 m arm With 2.42 m arm With 2.91 m arm With 3.51 m arm M Overall of boom With 2.03 m arm With 2.42 m arm With 2.91 m arm With 3.51 m arm N Track with triple grouser shoes * Excluding track shoe lug. G: Triple grouser shoe Unit: mm Working ranges m E D Ground 2 Line 3 F B B m Unit: mm ZXIS210 / 210L / 210N 5.6 Monoboom rm length 2.03 m 2.42 m 2.91 m 3.51 m Max. digging reach ' Max. digging reach (on ground) B Max. digging depth B' Max. digging depth (8' level) Max. cutting D Max. dumping E Min. swing radius F Max. vertical wall Bucket digging force ISO 151 kn 151 kn 151 kn 151 kn ( kgf) ( kgf) ( kgf) ( kgf) Bucket digging force SE : PS 129 kn 129 kn 129 kn 129 kn ( kgf) ( kgf) ( kgf) ( kgf) rm crowd force ISO 144 kn 133 kn 109 kn 95 kn ( kgf) ( kgf) ( kgf) (9 700 kgf) rm crowd force SE : PS 138 kn 127 kn 102 kn 92 kn ( kgf) ( kgf) ( kgf) (9 400 kgf) Excluding track shoe lug. ** t power boost. 4

5 SPEIFITIONS Dimensions: 2-Piece boom K L E D / D F M I G H J N B ZXIS210 ZXIS210L ZXIS210N Sprocket centre to idler centre B Undercarriage length * ounterweight clearance D Rear-end swing radius D Rear-end length E Overall width of upper structure F Overall of cabin *G Min. ground clearance H Track gauge I Track shoe width G 600 G 600 G 500 J Undercarriage width K Overall width L Overall length With 2.03 m arm With 2.42 m arm With 2.91 m arm With 3.51 m arm M Overall of boom With 2.03 m arm With 2.42 m arm With 2.91 m arm With 3.51 m arm N Track with triple grouser shoes * Excluding track shoe lug. G: Triple grouser shoe Unit: mm Working ranges m E D B F B Ground Line m Unit: mm ZXIS210 / 210L / 210N 2-Piece boom rm length 2.03 m 2.42 m 2.91 m 3.51 m Max. digging reach ' Max. digging reach (on ground) B Max. digging depth B' Max. digging depth (8' level) Max. cutting D Max. dumping E Min. swing radius F Max. vertical wall Bucket digging force ISO 151 kn 151 kn 151 kn 151 kn ( kgf) ( kgf) ( kgf) ( kgf) Bucket digging force SE : PS 129 kn 129 kn 129 kn 129 kn ( kgf) ( kgf) ( kgf) ( kgf) rm crowd force ISO 144 kn 133 kn 109 kn 95 kn ( kgf) ( kgf) ( kgf) (9 700 kgf) rm crowd force SE : PS 138 kn 127 kn 102 kn 92 kn ( kgf) ( kgf) ( kgf) (9 400 kgf) Excluding track shoe lug. ** t power boost. 5

6 LIFTING PITIES Metric measure Notes: 1. Ratings are based on ISO Lifting capacity of the ZXIS series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load is the center-line of the bucket pivot mounting pin on the arm. 4. * Indicates load limited by hydraulic capacity m = Ground. B : B: : Lifting capacity ZXIS210 MONOBLOK BOOM Rating over-side or 360 degrees Rating over-front t max. reach rm 2.03 m 6 m * Shoe 600 mm 4 m *7 990 *7 560 * m m m * m * * rm 2.42 m 6 m * * Shoe 600 mm 4 m *7 320 *7 320 * * m * m m m * * rm 2.91 m 6 m *4 360 *4 360 * * Shoe 600 mm 4 m *6 460 *6 460 *5 580 *5 580 * * m * * m *4 640 * m *7 330 * m * * m * * rm 3.51 m 6 m * * Shoe 600 mm 4 m *4 880 *4 880 * * * m *6 870 *6 870 * * * m *5 710 *5 710 * m *7 390 * m * * m * * * * ZXIS210L MONOBLOK BOOM t max. reach rm 2.03 m 6 m *5 340 *5 340 * * Shoe 600 mm 4 m *7 990 *7 990 * * * m * * m m * m * * * * * * rm 2.42 m 6 m *4 850 *4 850 * Shoe 600 mm 4 m *7 320 *7 320 * * * m * * m * * m * m * * * *

7 LIFTING PITIES Metric measure Notes: 1. Ratings are based on ISO Lifting capacity of the ZXIS series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load is the center-line of the bucket pivot mounting pin on the arm. 4. * Indicates load limited by hydraulic capacity m = Ground. B : B: : Lifting capacity ZXIS210L MONOBLOK BOOM Rating over-side or 360 degrees Rating over-front t max. reach rm 2.91 m 6 m *4 360 *4 360 * * Shoe 600 mm 4 m *6 460 *6 460 *5 580 *5 580 * * * m * * * * m *4 640 * * m *7 330 * m * * * m * * rm 3.51 m 6 m * * Shoe 600 mm 4 m *4 880 *4 880 *4 540 *4 540 * * * m *6 870 *6 870 * * * * * m *5 710 *5 710 * * m *7 390 *7 390 * * m * * * m * * * * * ZXIS210N MONOBLOK BOOM t max. reach rm 2.03 m 6 m *5 340 *5 340 * * Shoe 500 mm 4 m * * * * m * m m * m * * * * * rm 2.42 m 6 m * * Shoe 500 mm 4 m *4 870 *4 870 * * * m * * m * m * m * * * rm 2.91 m 6 m *4 360 *4 360 * * Shoe 500 mm 4 m *6 460 *6 460 *5 580 *5 580 * * * m * * * m *4 640 *4 640 * m *7 330 *7 330 * m * * m * * rm 3.51 m 6 m * * Shoe 500 mm 4 m *4 880 *4 880 * * * * m *6 870 *6 870 * * * * m *5 710 *5 710 * * m *7 390 *7 390 * m * * m * * * *

8 LIFTING PITIES Metric measure Notes: 1. Ratings are based on ISO Lifting capacity of the ZXIS series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load is the center-line of the bucket pivot mounting pin on the arm. 4. * Indicates load limited by hydraulic capacity m = Ground. B : B: : Lifting capacity ZXIS210 2-PIEE BOOM Rating over-side or 360 degrees Rating over-front t max. reach rm 2.03 m 6 m *7 890 *7 890 *7 580 *7 580 * * * Shoe 600 mm 4 m * * * * * m * * * * m * * m * * m * * * * rm 2.42 m 6 m *7 120 *7 120 * * * Shoe 600 mm 4 m * * * * * * m * * * * m * * m * * m * * * * rm 2.91 m *6 240 *6 240 *5 690 *5 690 *4 640 * Shoe 600 mm 6 m *5 930 *5 930 *5 770 *5 770 * * * m * * * * * * * m * * * * m * * * m * * * m * * * rm 3.51 m *4 980 *4 980 *4 360 *4 360 *3 620 * Shoe 600 mm 6 m *5 000 *5 000 * * * m *6 210 *6 210 *6 580 *6 580 * * * * * m * * * * * * m * m * * m * * m * * * * ZXIS210L 2-PIEE BOOM t max. reach rm 2.03 m 6 m *7 890 *7 890 *7 580 *7 580 *6 530 *6 530 * * Shoe 600 mm 4 m * * * * * * * m * * * * * m * * * m * * * * m * * * * rm 2.42 m 6 m *7 120 *7 120 *6 180 *6 180 * * Shoe 600 mm 4 m * * * *7 110 *6 390 * * * m * * * * * m * * * m * * * m * * * * *

9 LIFTING PITIES Metric measure Notes: 1. Ratings are based on ISO Lifting capacity of the ZXIS series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load is the center-line of the bucket pivot mounting pin on the arm. 4. * Indicates load limited by hydraulic capacity m = Ground. B : B: : Lifting capacity ZXIS210L 2-PIEE BOOM Rating over-side or 360 degrees Rating over-front t max. reach rm 2.91 m *6 240 *6 240 *5 690 *5 690 *4 640 * Shoe 600 mm 6 m *5 930 *5 930 *5 770 *5 770 * * * m * * *8 250 *8 250 * * * * * m * * *8 480 * * * * m * * * * * m * * * m * * * * * rm 3.51 m *4 980 *4 980 *4 360 *4 360 *3 620 * Shoe 600 mm 6 m *5 000 *5 000 *4 780 *4 780 * * m *6 210 *6 210 *6 580 *6 580 *6 050 *6 050 * * * * m * * * *8 470 * * * * * m * * *8 270 * * m * * * * m * * * * m * * * * * ZXIS210N 2-PIEE BOOM t max. reach rm 2.03 m *7 750 *7 750 *7 300 * Shoe 500 mm 6 m *7 890 *7 890 *7 580 *7 580 * * * m * * * * * * * m * * * * m * * * * m * * * m * * * * rm 2.42 m *7 090 *7 090 *6 330 * Shoe 500 mm 6 m *7 120 *7 120 * * * m * * * * * * * m * * * *8 630 * * m * * m * * * * m * * * * * rm 2.91 m *6 240 *6 240 *5 690 *5 690 *4 640 * Shoe 500 mm 6 m *5 930 *5 930 *5 770 *5 770 * * * m * * * * * * * * m * * *7 690 * * * * m * * m * m * * * rm 3.51 m *4 980 *4 980 *4 360 *4 360 *3 620 * Shoe 500 mm 6 m *5 000 *5 000 * * * m *6 210 *6 210 *6 580 *6 580 * * * * * m * * * * * * * m * * * * m * * * m * * * m * * * *

10 EQUIPMENT Standard Equipment Standard equipment may vary by country, so please consult your Hitachi dealer for details. ENGINE H/P mode control E mode control 50 alternator Dry-type air filter with evacuator valve (air filter restriction indicator) artridge-type engine oil filter artridge-type fuel filter ir cleaner double filters Radiator and oil cooler with dust protective net Radiator reserve tank Fan guard Isolation-mounted engine uto-idle system uto acceleration system HYDRULI SYSTEM Work mode selector Engine speed sensing system E-P control system Power boost uto power lift Quick warm-up system for pilot circuit Shockless valve in pilot circuit Boom-arm anti-drift valve ontrol valve with main relief valve Extra port for control valve Suction filter Full-flow filter Pilot filter BIN RES (enter pillar Reinforced Structure) cabin OPG top guard fitted Level I (ISO) compliant cabin ll-weather soundsuppressed steel cabin Equipped with reinforced, tinted (bronze color) grass windows 4 fluid-filled elastic mounts Upper, lower and left-side windows can be opened Intermittent windshield retractable wipers Front window washer djustable reclining seat with adjustable armrests Footrest Electric double horn M - FM radio with digital clock uto-idle / acceleration selector Seat belt Drink holder igar lighter shtray Storage box Glove compartment Fire extinguisher bracket Floor mat Pilot control shut-off lever Engine stop knob uto control air conditioner Transparency roof with roll curtain Suspension seat MONITOR SYSTEM Meters: Hour- and trip-, engine coolant temperature gauge and fuel gauge Warning lamps: lternator charge, engine oil pressure, engine overheat, air filter restriction and minimum fuel level Pilot lamps: Engine preheat, work light, auto-idle, auto-acceleration, digging mode and attachment mode larm buzzers: Engine oil pressure and engine overheat LIGHTS 2 working lights UPPER STRUTURE Undercover kg counterweight (ZXIS210 / 210L) kg counterweight (ZXIS210N) Fuel level float Hydraulic oil level gauge Toolbox Utility space (without ZXIS210N) Rearview mirror (right & left side) Swing parking brake UNDERRRIGE Travel parking brake Travel motor covers Track guards and hydraulic track adjuster Bolt-on sprocket Upper rollers and lower rollers Reinforced track links with pin seals FRONT TTHMENTS HN bushing W thermal spraying Reinforced resin thrust plate Flanged pin Monolithically cast bucket link entralized lubrication system Dirt seal on all bucket pins MISELLNEOUS Standard tool kit Lockable machine covers Lockable fuel filling cap Skid-resistant tapes, plates and handrails. Travel direction mark on track frame Onboard IX Optional Equipment Optional equipment may vary by country, so please consult your Hitachi dealer for details. BIN Front glass lower guard Front glass upper guard Overhead guard OPG top and front guard fitted Level II (ISO) complied cabin nti-vandal cover Suspension seat with heater irsuspension seat with heater Rain guard Sun visor dditional fuse box Immobilizer key 12 V power supply LIGHTS dditional cabin roof front lights dditional cabin roof rear lights dditional boom light with cover Rotating lamp UNDERRRIGE Reinforced track guard (2 units each side) Full track guard Track undercover TTHMENT Hammer and crusher piping Parts for hammer Parts for hammer and crusher Parts for 2 speed selector ssist piping dditional pump (30 l/min, 50 l/min) lamshell piping Quick coupler piping Reinforced link B Reinforced arm OTHERS Hose rupture valves Overload warning device Electric fuel refilling pump uto-lubrication pump kg demolition counterweight (ZXIS210 / 210L) Pre-cleaner Fuel double filters Large-capacity battery Quick heater system High-performance full-flow filter (with restriction indicator) Bio oil 10

11 NOTES 11

12 Hitachi onstruction Machinery (Europe) NV Souvereinstraat 16, 4903 RH Oosterhout, P.O. Box 404, 4900 K Oosterhout, The Netherlands T +31-(0) , F +31-(0) , Siciliëweg 5, Haven 5112, 1045 T msterdam, P.O. Box 59239, 1040 KE msterdam, The Netherlands T +31-(0) , F +31-(0) , Breaking new ground DS-EN ZX These specifications are subject to change without notice. Illustrations show the standard models and may include optional equipment or accessories with some differences in color and features. Before use, go through the operator's manual for proper operation Hitachi onstruction Machinery (Europe) NV.