combirex Made in Italy CX250
|
|
- Joshua McKinney
- 6 years ago
- Views:
Transcription
1
2 combirex CX50 Combirex CX50 pneumatic brake has been the reference brake in the converting industry and it is still widely used on unwinders and in various applications. The CX50 has been designed by Giampiero Re, in the 1980s, who later founded the company, Renova, in 005. In the 1980 s Mr. Re applied an innovative axial fan ventilation on the CX mono-disc brakes which helped to decrease the temperature faster than before. This led to a reduction of pad wear and an increased web tension quality compared to previous brakes without a cooling fan. Today, the Renova CX pneumatic brake is the result of continuous research and improvements. Great importance is given to the selection of precise materials to reach and always provide a higher performance and less wear of components. Made in Italy { All Renova s products are managed by TUV ISO
3 Brake selection guide combirex CX50 The combirex CX50 is a monodisc, multicaliper air cooled brake. It reaches a maximum torque of 90 Nm and a power dissipation of,5 kw. CUSTOMIZABLE CALIPER CONFIGURATION Up to calipers STURDY DISC Cast iron 50 mm diameter disc T max min Ts LIGHT STRUCTURE Aluminium housing Tensioning Unit of measure max/min web tension [N] T max = Ts Lmax maximum web tension web tension per centimeter [N/cm] T min = Ts Lmin minimum web tension D max min max/min roll diameter [m] Cf max = Dmax Tmax maximum torque L max min max/min web width [cm] Cf min = Dmin Tmin minimum torque m roll maximum weight [Kg] v web speed [m/min] p heat dissipated [kw] t breaking time [s] P = Tmax v heat dissipated Emergency stop Cf max = m Dmax v 0 t torque in Tm HIGH QUALITY COMPOUNDS High pad performance and constant tension control ax / Tm HIGH HEAT DISSIPATION High rpm fan up to,5 kw ax / Lm in Lm ax in Dm Dm 0LA?Eł? PAJOEKJ R=HQAO BKN I=PANE=HO Paper Weight g/m Web tension [N] per centimeter Ts ,3-0, , , , , Board Weight g/m Web tension [N] per centimeter Ts Cellophane 0,0 Polyethylene 0,01-0,0 Polypropilene 0,015-0,05 Aluminium 0,035-0,105 See the videos on 5
4 Technical data The combirex CX50 is available with up to calipers according to the torque needed. Moreover, a selection of diverse HP fan models is available in order to reach different heat dissipation values red CX50 spare parts The CX50 has a wide range of spare parts that are also suitable for all of the CX50 brakes series available on the market. Complete calipers or components, pads, fans and discs are all made of the highest quality material to ensure high life span of parts and better performance of the brake. -0/+0,1 100% INTERCHANGEABLE 1/8" fan + termoswitch _+ VDC + _ rew counter black bleu braun black nr calipers max NUMBER OF CALIBERS TORQUE (Nm) 0, bar TORQUE (Nm) bar HEAT DISSIPATION (kw) Fan Vdc HP1 Fan Vdc HP Fan Vdc HP3 CX ,5 10 CX CX 50.3 CX 50. 3, ,5,5 CX ,5 800 CX
5 Calipers NT Description Code FRICTION COEFFICENT µ Complete caliper 00CX50P01 1 Selector SELAIRCX50 Dem gasket 00DEM350 0,5 0, 0,3 0, NT DESCRIPTION Standard pads KPCXNT 3 Complete piston 00CXP5000 0,1 F=79 N V=7,0 m/s Standard pads with anti-vibration ring KPCXNTA Spring 00CXMO TEE for capiper 00CXRT1080 R-15 TEMPERATURE ( C) ELBOW for capiper 00CXRL1080 FRICTION COEFFICENT µ 7 Locking ring 00CX50ANP 0,5 0, R-15 DESCRIPTION 8 Pad spring 00CXMO9010 0,3 KPCXR15 9 Seeger 00CXAS305 0, 0,1 F=79 N V=7,0 m/s with anti-vibration ring KPCXR15A Pads New and better performing pad models with a new compounds formula are available. R-15K Kevlar TEMPERATURE ( C) Reduced powder emissions FRICTION COEFFICENT µ Longer life span of pads Higher performance 0,5 0, 0,3 R-15K DESCRIPTION in Kevlar material KPCXR15K RoHs Compliant pads asbestos, hexavalent chromium, mercury, cadmium, antimony, lead FREE! 0, 0, TEMPERATURE ( C) F=79 N V=7,0 m/s in Kevlar material with anti-vibration ring KPCXR15KA 8 9
6 Fan INNOVATION DESIGNED TO LAST UPGRADE KIT FAN COVER + FAN KIT HP1 (fan cover + INTERNAL Vdc HP1) KVCX KIT HP (fan cover + INTERNAL Vdc HP) KVCX0000H30 KIT HP3 (fan cover + INTERNAL Vdc HP3 KVCX0000H0 Renova provides class-leading products that increase the productivity =J@ PDA O=BAPU HARAH SDEHA NA@Q?EJC maintenance costs and procedures. SPARE PARTS Ø x 10 COMPACT STANDARD 80 x 80 INTERNAL STANDARD (Ø150X55) Vdc VT STANDARD (Ø150X55) 0 AC VT STANDARD (Ø150X55) 110 AC VT COMPACT (10X10X38) 0 AC VT10380 COMPACT (10X10X38) 110 AC VT COMPACT (10X10X38) Vdc VT10380 COMPACT (10X10X38) Vdc HP VT10380H COMPACT (10X10X38) Vdc HP VT10380H INTERNAL (80X80X38) Vdc HP1 VT INTERNAL (80X80X38) Vdc HP VT800380H3 INTERNAL (80X80X38) Vdc HP3 VT800380H Central disc hole 30 mm rough DCCX50000 Disc hole 35mm for taper lock DCCX50D35C Disc hole 0mm for taper lock DCCX50D0C Disc hole 5mm for taper lock DCCX50D5C Disc hole 50mm with keyway DCCX50D50K Disc hole 0mm with keyway DCCX50D0K Disc All other dimensions are available customizable disc 10 11
7 CATCXENAV0517
control systems Made in Italy Integrated systems for the web tension regulation
control systems Integrated systems for the web tension regulation We know that producing quality laminates require very high web tension control. For this reason we provide a very wide range of integrated
More informationWinding technology, pneumatically actuated tension brakes
Winding technology, pneumatically actuated tension brakes Pneumatically actuated tension brakes with internally ventilated brake disc Series 0454 Operation 7.03.00 Properties, areas of application 7.03.00
More informationEasy Access with Removable Cover Panel
Mistral Brakes Modular design permits variable tensioning capacities! Wichita Clutch s Mistral pneumatic tension brakes are ideally suited to the needs of the corrugating market for which it was originally
More informationHydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc rakes SF Series SF SF 30 SF 1 SF 4 4 380 3 3 30 80 0 1 1 10 0 rake torque in knm DIN ISO 01 : 0 QA-Nr.: 0 1941 SF 80 UENZER REMSEN is certified according to DIN EN ISO 01:0 00 1
More informationHydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc Brakes SF Series 40 20 00 480 460 SF 0 440 420 400 380 360 340 320 SF 40 SF 30 SF 24 280 260 160 Brake torque in knm SF 1 SF 0 0 80 60 PINTSCH BUBENZER is certified according to
More informationTAKE IT TO THE NEXEN LEVEL
TAKE IT TO THE NEXEN LEVEL INDUSTRIES SERVED Aerospace Automation Equipment Automotive Bottling CNC Machining Commercial Laundry Equipment Converting Conveying Food Processing Machine Tool Material Handling
More informationHydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc rakes SF Series SF SF 30 SF 1 SF SF 4 4 0 380 3 3 30 80 0 1 1 10 0 80 rake torque in knm PINTSCH UENZER is certified according to DIN EN ISO 01:0 0 00 1 10 10 0 0 0 0 800 rake disc
More informationHydraulic Caliper Disc Brakes SFRA 5
BRAKE SYSTEMS FOR WIND ENERGY Rotor Brake (active) Hydraulic Caliper Disc Brakes SFRA 5 25 PINTSCH BUBENZER is certified according to DIN EN ISO 9001:2000 SFRA 5 (µ = 0,4) SFRA 5 (µ = 0,3) SFRA 5 (µ =
More informationEXAMPLES GEARS. page 1
(EXAMPLES GEARS) EXAMPLES GEARS Example 1: Shilds p. 76 A 20 full depth spur pinion is to trans mit 1.25 kw at 850 rpm. The pinion has 18 teeth. Determine the Lewis bending stress if the module is 2 and
More informationbrakes WBA1-75-SC Active Hydraulic Disc Brake experienced, global, reliable wind turbine Customer Options Key Features
WBA1-75-SC The WBA1-75-SC has been specifically designed to meet the exacting requirements of Wind Turbine rotor braking applications, where guaranteed stopping and holding performance is required in both
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationHoles 13 dia (M12-87Nm)
MR Disc Brake Caliper DS000 5 6 66 33 3 36.5 06.4 4.7 55.6 8 Disc Thickness 3 Holes 3 (M - 87Nm) 7 79.4 3 4.3 54 Braking path Disc Brake Caliper Part Number 678043 Weight Pad wear allowance Total pad area
More informationBA series - brake motors. for wind turbine generators
series brake motors for wind turbine generators general information on MGM brake motors MGM brake motors are asynchronous three phase totally enclosed fan cooled motors. In case of power failure motors
More informationAirflex Air Cooled Disc Clutches and Brakes
Airflex Air Cooled Disc Clutches and Brakes DBA Description... 183 DBA Brake Elements... 185 DBA Technical information... 186 DBB and DBBS Description... 187 DBB Brake Elements... 189 DBB Technical Information...
More informationCaliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7
Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2
More informationAtlas Copco Professional Aluminium Piston Compressors
Atlas Copco Professional Aluminium Piston Compressors Automan Series Oil-lubricated (- kw / - hp) Total capability, total responsibility Right at the heart of your business, Atlas Copco delivers quality
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPB
Progressive distributor VPB Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. different proportioning
More informationR to disc edge. Caliper Part Number Caliper Part Number for K and L Thrusters. Pad wear allowance
MS Disc Brake Caliper DS1500 TWIFLEX MS 6.4 20.5 to disc edge 137 R22 2 Holes14 dia M12-87Nm) 12.7 1 76 135 2 121 Caliper Part Number. 6780277 Caliper Part Number. 6780842 for K and L Thrusters Weight
More informationOIL/AIR ACTUATED POWER TAKE OFF
HF OIL/AIR ACTUATED POWER TAKE OFF HF POWER TAKE OFF HFO - FOR SIDE LOAD APPLICATIONS Unique greased for life bearing design Eliminates the pilot bearing inside the engine flywheel Rotary union for high
More informationCable break device. Cable break device. Cable break device 9.1
9 9 25350 Max. cable Ø Cable break device : Pair : 1.04 kg with plastic cover : Cable break device for residential doors max. 170kgs. Only suitable for Doco tracks. Supplied with orange safety cover. TÜV
More informationBrake Systems for Mining. Safety. Made in Germany.
Brake Systems for Mining. Safety. Made in Germany. 2014 PINTSCH BUBENZER www.pintschbubenzer.com Content Thruster Disc Brakes A7 - A13 Pneumatic Disc Brakes J1 - J8 Hydraulic Disc Brakes B1 - B21 Electromagnetic
More informationbrakes WBA1-75-SC Active Hydraulic Disc Brake experienced, global, reliable wind turbine Customer Options Key Features
WBA1-75-SC The WBA1-75-SC has been specifically designed to meet the exacting requirements of Wind Turbine rotor braking applications, where guaranteed stopping and holding performance is required in both
More information...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationButterfly valves. Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy
Butterfly valves pneumatic electric hydraulic pneumatic actuators Technical features 1 Elements list 2 Tables 3 torque 3 dimensions 5 Solenoids 6 options and 6 Declutchable gearboxes 7 electric actuators
More informationDrilling Rig LB LB
Drilling Rig LB 2-23 EN LB 22.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment
More informationOIL/AIR ACTUATED POWER TAKE OFF
OIL/AIR ACTUATED POWER TAKE OFF POWER TAKE OFF O - FOR SIDE LOAD APPLICATIONS Unique greased for life bearing design Eliminate the pilot bearing inside the engine flywheel R - - Rotary union for high reliability
More informationTechnical data Drilling rig LB 16
Technical data Drilling rig LB 16 Concept and characteristics Leader top for auxiliary rope Leader top for Kelly rope Kelly Kelly rope Tensioning cylinder for crowd system Rotary Inclination device Casing
More informationPiling Rig LRH 100 LRH
Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Leader top Leader top for auxiliary rope Auxiliary rope Leader Leader ball joint Hydraulic hammer Rope guide Boom Radius adjustment device
More informationDrilling Rig LB LB Courtesy of Crane.Market
Drilling Rig LB 36-41 EN LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationDrilling Rig LB LB
Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More information14 (0.55 in) MU-2 Brake Caliper. Caliper with Tension Spring Part No Weight (caliper only) kg (1.65 lb)
MU (Mk ) Series Disc Brake Caliper DB00 9 M0 Mounting Bolt Grade Tighten to Nm (.9 lbf-ft) Bolt not supplied with Caliper. A A 0 (. in) (.99 in) Crs Crs (.0 in) (0. in) ø0 (. in) Section on A-A MU- Brake
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationPiling Rig LRH 100 LRH
Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Dimension and weights LRH 1 18.4 18.4 18.4 18.4 19 1998-243 6 45 875 368 R 376 9 44 545 Technical data Total height 19.98-24.3 m Max. pile
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationPOSEIDON 5. Part List English
Model: -21-28 -31-43 -51-54 -58-62 -63 POSEIDON FAVORITE Part List English Table of Contents Cabinet 3 Frame 5 Motor 7 Pump, oiltank 9 Pump, kits 11 Cylinder head 13 Control safety block (a) 15 Control
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationROLL-UP COVERS Standard products
A ROLL-UP COVERS Standard products P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages: Reliability Compact size Extremely high speeds
More informationpatented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
More informationAirflex. Airflex DBB & DBA Brakes
36191_12pg Covers 8/11/03 6:06 PM Page 01 Airflex Airflex DBB & DBA Brakes These spring-applied, pressure released, disc style brakes develop equal torque in either direction of rotation. Their torque
More informationDiscover the BLUESTAR 5
World Premiere! BLUESTAR 5 Discover the BLUESTAR 5 *Price plus VAT Subject to alterations The New Standard Machining Center from Hüller Hille Hüller Hille A Company of ThyssenKrupp MetalCutting tk Numerous
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationMagnetic particle clutches and brakes
Accurate torque control with instantaneous engagement! Warner Electric Precision Tork magnetic particle clutches and brakes are unique because of the wide operating torque range available. Torque to current
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 1 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Leader Rope guide Leader ball joint Radius adjustment device Boom Pile
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationMB SERIES High Precision Horizontal Boring Mills
MACHINING CENTERS by MACHINING CENTERS by YAMA SEIKI USA, INC. 5788 Schaefer Ave., Chino, CA 91710 TEL : ( 909 ) 628-5568 ( 888 ) 976-6789 FAX : ( 909 ) 628-5556 Web : www.yamaseiki.com E-mail : info@yamaseiki.com
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device
More informationPNEUMATIC RADIAL PISTON MOTOR
EasyDrive 4 Product features Start / stop under full load possible Maximum torque from starting available Overload protected Maintenance free Low noise level Minimised air consumption at high performance
More informationTechnical data Drilling rig LB 28
Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Kelly bar Inclination device Rotary
More informationHigh Pressure Gear Pumps KP 5
High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket
More informationHow to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
More informationDesign features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake
NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features
More informationMATERIALS PISTON TYPE. Non-magnetic
Cylinders to AFNOR NF E49-00 seriescx DESCRIPTION Cylinders series CX comply with AFNOR NF E49-00 (ex CNOMO) standard and so they result interchangeable. Cylinders series CX with magnetic piston type can
More informationTYPE 2 poles 4 poles 6 poles 8 poles 2 / 4 poles 4 / 8 poles 2 / 8 poles 4 / 16 poles
BAH-BAHS series Overwiew MGM Electric Motors was established in 1950 as a brake motors manufacturer. MGM is today a world leading manufacturer of this line of products. MGM brake motors are designed and
More informationAir cooled Diesel engines kw
Air cooled Diesel engines 2.7-8.8 kw 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 model s in the power r ange 2.7 to 8.8 k W. Particularly suited to small agricultur
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationDrilling Rig LB LB
Drilling Rig LB 16-18 EN LB 1.6 Concept and characteristics Leader top for Kelly rope Leader top for auxiliary rope Kelly rope Kelly Rotary Inclination device Special "Low Head" Auxiliary winch Standard
More informationTechnical data Drilling rig LB 20
Technical data Drilling rig LB 20 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device
More informationMX Series. MX Disc Brake Caliper Range. Disc Brake Caliper SMX. Disc Brake Caliper
MX Disc Brake Caliper Range The Twiflex MX13, MX25, MX30 and MX40 series of disc brake calipers are suitable for use with discs of 12.7mm, 25.4mm, 30mm and 40mm thick respectively. The SMX caliper is only
More informationAERZEN BULK VEHICLE BLOWER
AERZEN BULK VEHICLE BLOWER A E R Z E N E R M A S C H I N E N F A B R I K GMBH G1-071 05 EN 250 11.2012 Fields of application and principle of operation Aerzen bulk vehicle blowers have been specifically
More informationPneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke
Bonesi Series Pneumatic Cylinders VMA 24562 ISO 6431 SERIES CX Light alloy end caps painted gray. Clean profile aluminium body gauged inside and outside. Bore size 32-40-50-63-80-100-125 Available with
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationR D. Brackets Type Material Shaft D E F K R S T U X set mm mm mm mm mm mm mm mm mm mm Article N
Mounting Brackets for Interroll rum Motors 80s 113s rum Motor Bracket: ROHS chrome passivated mild steel or stainless steel R E K X T S rum Motor Brackets Brackets Type Material Shaft E K R S T X set mm
More informationAXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T
AXIAL PISTON MOTORS MF GENERAL DESCRIPTION Axial piston fixed displacement motors, Series 20, are of swash plate construction with preset displacement, and are intendent for closed circuit operation. The
More informationDrilling Rig LB LB
Drilling Rig LB 4-7 EN LB 3.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More informationWinding technology, pneumatically actuated tension brakes web tension open-loop and feedback control systems
Winding technology, pneumatically actuated tension brakes web tension open-loop and feedback control systems Ortlinghaus Plates. Clutches. Brakes. Systems. 왎 Winding technology - pneumatically actuated
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Poly-V Pulleys & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them Poly-V Pulleys & elt Drives Poly-V Pulleys & elt Drives Poly-V is a multi rib belt drive whose special construction allows it to be used with
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPA-D
Progressive distributor VPA-D Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. Clear and
More informationUCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS
CENTRIFUGAL PUMPS CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 PERFORMANCE CHART CMA 0.50 203 PERFORMANCE CHART CMA 0.75 204 PERFORMANCE CHART CMA 0.80 205 PERFORMANCE CHART
More informationKTM PNEUMATIC ACTUATORS AK SERIES (FOR SMALL AND MIDDLE SIZED VALVES)
Compact and light-weight actuator, equipped with a guide rod for smooth operation and extended durability FEATURES Double acting and single acting type are of the same shape and dimension Double rack and
More informationA l t r a I n d u s t r i a l M o t i o n. MSV/BRG Marine Clutches
A l t r a I n d u s t r i a l M o t i o n MSV/BRG Marine Clutches Wichita Clutch I MSV/BRG Marine Clutches FEATURES For drive arrangements in marine propulsion - PTO/PTI - dredge pump and thruster applications.
More information1 of 10. KT Hoist & Crane Sdn. Bhd. Electric Chain Hoist SR WINCH. Electric Chain Hoist, Trolley, Low Headroom Chain Hoist, Synchronize Twin Hoist
KT Hoist & Crane Sdn. Bhd. Electric Chain Hoist Electric Chain Hoist, Trolley, Low Headroom Chain Hoist, Synchronize Twin Hoist 12 Months Warranty 48 Months Peaces of Mind Warranty Original Japan Chain
More informationFMM bar. Working pressure. Style T. Style D. Style S. Style B D.I. D.I. D.I. D.I.
30 FMM 050 SRIS FMM 050 Working pressure 0 bar Style S Style Style T Style D 3 3 Technical data Filter body (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel (chemical heat treatment)
More informationDIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
More informationSection 21 Actuators. (Electric and Pneumatic) Edition 2
Section 21 Actuators (Electric and Pneumatic) Edition 2 291 [21] ACTUATORS Pneumatic Actuator FEATURES OF SINGLE AND DOUBLE ACTING ACTUATORS - Self Energizing V-Seal piston ring - Double rack & Pinion
More informationRX 3 MCB 4500 A Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationTypes and operating description
22 Flexible jaw and 24 -NORM Types and operating description ROTEX Flexible jaw and 73 74 75 76 78 79 REVOLEX Technical data Type KX-D, material cast Type KX-D, material steel Type KX-D with brake disk
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 100 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Rope guide Leader ball joint Boom Leader Radius adjustment device
More informationSpare parts list M R S. Motor Clamshell Grab. No. 2.3G ,7 m 3
Spare parts list M R S Motor Clamshell Grab No. 2.3G.2232-2234 3,7 m 3 MRS Greifer GmbH, Talweg 15 17, 74921 Helmstadt-Bargen/Germany Tel. : +49-7263-91 29-0, Fax : +49-7263-91 29 12 info@mrs-greifer.de
More informationHYTECH ENGINEERING & SERVICES
rental HPU 001-002 Variable pressure compensated pump Dimension (L * W * H) 15 * 10 * 0 Kg Efficiency 92,7 Power Factor Cos φ 0,88 I.P Class 56 K.W Rating 75 KW 86 KW Voltage 2 / 3 V 440 V Current 242
More informationSERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
More information[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer
[ E[M]CONOMY] means: Standing up to any challenge. FAMUP MC and MCP Vertical CNC machining centers with and without pallet changer MC 120-60 and MC 75-50 The EMCO FAMUP MC series. One of the most advanced
More informationMobile Hydraulics Solutions
Mobile Hydraulics Solutions Fan Drives Hydraulically Driven Lube Oil PTO Gear Pumps KP Asphalt Gear Pumps BTH 1 Mobile Hydraulics Solutions Content 2 Hydraulic motors KM 3-19 Fan drives 3 KM 1 space optimized
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationGearboxes. Gearboxes
254 Brammer provide a comprehensive nationwide industrial repair service. Strategically located Gearbox Centres around the UK Complete service from emergency repair or gearbox replacement to scheduled
More informationROMI VTL 500R / VTL 500MR Vertical Lathes
A TRADITION OF INNOVATION ROMI VTL 500R / VTL 500MR Vertical Lathes 28/08/2013 ROMI VTL 500R Vertical Lathe CNC R RIGHT / DIREITA The definition of R (right / right) is according to the turret and the
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationTechnical data Piling and drilling rig LRB 255
Technical data Piling and drilling rig LRB 255 Concept and characteristics Leader top for auxiliary rope Rope crowd system Tool with quick connection Auxiliary winch Leader Lateral inclination device Leader
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationmoviroll Made in Italy More productivity, higher safety level
moviroll More productivity, higher safety level Moviroll roll pushers improve the productivity and increase the safety level as they allow the operator to effortlessly and safely maneuver both large and
More information