Spare parts list M R S. Motor Clamshell Grab. No. 2.3G ,7 m 3
|
|
- Sydney Quinn
- 5 years ago
- Views:
Transcription
1 Spare parts list M R S Motor Clamshell Grab No. 2.3G ,7 m 3 MRS Greifer GmbH, Talweg 15 17, Helmstadt-Bargen/Germany Tel. : , Fax : info@mrs-greifer.de
2 Technical Data 1.0 Motor Clamshell Grab with electro-hydraulic drive Grab Serial No.: Year of construction: 1998 Capacity: 3,7 m³ Dead weight: Closing time: Opening time: Hydraulic pressure "Closing": "Opening": kg 10,5 sec. 6,0 sec. 220 bar 150 bar Driving parts 1.) E Motor: 18,5 kw at 100% duty cycle 23,1 kw at 40% duty cycle Protection: IP 55 Rotations: RPM Working tension: 380 V - 50 Hz 2.) Axial piston pump: in bent axis design, fixed displacement Type: A2FM 45 Oil output of pump: 66,0 l/min 3.) Hydraulic cylinders: 2 pieces, double - acting, piston rod hard - chromed Type: 125 / Brand: MRS 4.) Control block: NG 15 N Brand: Rexroth 5) Tank capacity: 140 litres Oil type: Renolin B10 VG 32
3 Electric wiring diagram Working tension 380 V 50 Hz Auxiliar circuit 220 V Open Close Cable drum CRANE PART Socket connection at the grab Limit switch GRAB PART Open Close Motor: 18,5 kw at 100% duty cycle 23,1 kw at 40% duty cycle IP RPM
4 Hydraulic circuit diagram / Grab closing Grab opening Control block NG 15 N RD 4 DV 1 DV bar 150 bar Three-phase current motor N= 18,5 kw at 100% duty cycle N= 23,1 kw at 40% duty cycle n= RPM, 380 V - 50 Hz Pump output 66,0 l/min
5 Lubrication plan 4.0 Oil filling Oil level check Oil outlet = Daily grease (after every 8 working hours)
6 Spare parts list 5.0 Page 1 of
7 Spare parts list 5.0 Page 2 of 2 Motor Clamshell Grab Grab serial no.: 2.3G Year of construction: 1998 Grab capacity: 3,7 m³ Grab dead weight: kg Part Qty Denomination Drawing 1 1 Suspension bolt Upper cylinder bolt Grab cross beam Cylinder protection Guiding rods Shell rotation bearing 7 4 Lower cylinder bearing 8 2 Grab shell Guiding rods bearing 10 2 Cover Pressure hose (closing) NW Pressure hose (opening) NW Electric socket and plug Leidel 14 1 Closing and opening advice Hydraulic cylinder Hydraulic drive unit Look at sectional drawing
8 Shell rotation bearing Part Qty/grab Denomination Drawing-No. Remark Shell rotation bolt Disc Clamping sleeve Bush
9 Lower cylinder bearing Part Qty/grab Denomination Drawing-No. Remark Lower cylinder bolt, complete Swing bearing SEEGER circlip ring
10 Guiding rods bearing Part Qty/grab Denomination Drawing-No. Remark Guiding rods bolt Bush
11 Hydraulic cylinder 125 / Part Qty/cyl. Denomination Drawing-No. Remark 35 1 Hydraulic cylinder complete Piston rod Piston Counter nut Piston sealing O - Ring, piston Piston rod guiding Piston rod sealing Piston rod strip-off device O - Ring, cover Final cover Cylinder bottom Cylinder tube with head part Cylinder eye with thread Fixing screw with spring-ring
12 Hydraulic drive unit Part Qty. Denomination Drawing-No Hydraulic drive unit 66,0 l 18,5 kw - NG 15 N E - Motor IP V - 50 Hz 18,5 kw Coupling Pump basement O Ring Basic plate for drive unit O Ring Flat tightening High pressure hydraulic pump 66,0 l/min A2FM O Ring for return check valve O Ring for return check valve Return check valve O Ring for return check valve Control block complete Rexroth NG 15 N O - Ring Basic plate for control block O Ring Restrictor valve RD 4
Technical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
More informationHydraulic Rotary Hammer Drill
M a s c h i n e n f a b r i k G m b H Hydraulic Rotary Hammer Drill Type 2 2406 0010 Techn. Doc. No. 262 Illustration can differ from the original Repair Manual and Spare Parts List 224060010_Inst_en_Version_06.doc
More informationBC Spare parts list. Bucket crusher. BC 2500 s/n DEQ Construction Tools GmbH No
BC 2500 Spare parts list Bucket crusher BC 2500 s/n DEQ159235 2018 Construction Tools GmbH No. 3390786201 2018-01-01 General information This spare parts list applies to the following: Part number Description
More informationVibrastar 40, 50, 60. Spare parts list. Poker vibrators. Valid from serial number Construction Tools PC AB No e
Vibrastar 40, 50, 60 Spare parts list Poker vibrators Vibrastar 40, 50, 60 Valid from serial number MHN000001 2015 Construction Tools PC AB No. 9800 1182 01e 2015-09-03 Vibrastar 40, 50, 60 Spare parts
More informationCB Spare parts list. Hydraulic concrete buster. CB 2500 s/n DEQ Construction Tools GmbH No
CB 2500 Spare parts list Hydraulic concrete buster CB 2500 s/n DEQ169050-2018 Construction Tools GmbH No. 3390787501 2018-11-22 General information This spare parts list applies to the following: Part
More informationTechnical data Hydraulic crawler crane HS 885 HD
Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight
More informationSpare parts list. Hydraulic breakers RX 30.
Spare parts list Hydraulic breakers RX 30 RX 30 Valid from serial number DEQ121453 Valid to serial number www.cp.com RX 30 Spare parts list General information This spare parts list applies to the following:
More informationTechnical data Hydraulic crawler crane HS 875 HD
Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight
More informationSpare parts list. Hydraulic breakers RX 26.
Spare parts list Hydraulic breakers RX 26 RX 26 Valid from serial number DEQ152263 Valid to serial number www.cp.com RX 26 Spare parts list General information This spare parts list applies to the following:
More informationTechnical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
More informationHB 3100, 3100 DP. Spare parts list. Hydraulic breakers. HB 3100 s/n DEQ HB 3100 DP s/n DEQ
HB 3100, 3100 DP Spare parts list Hydraulic breakers HB 3100 s/n DEQ180614 - HB 3100 DP s/n DEQ180614-2018 Construction Tools GmbH No. 3390791201 2018-04-26 General information This spare parts list applies
More informationConstruction Machine HS enus HS
Construction Machine HS 8200 enus HS 8007.01 Concept and characteristics Basic machine HS 8200 with dragline equipment Main boom 2220.24 Pendant straps Hoist rope guide Hoist winch I Cabin Undercarriage
More informationTechnical data Hydraulic crawler crane HS 8040 HD
Technical data Hydraulic crawler crane HS 8040 HD Dimensions Basic machine with undercarriage 2860 7350 3000 1700 1060 3300 1200 2340 4610 5460 R = 3900 700 4200 310 4200 990 11240 Operating weight The
More informationHB 3600, 3600 DP. Spare parts list. Hydraulic breakers. HB 3600 s/n DEQ HB 3600 DP s/n DEQ
HB 3600, 3600 DP Spare parts list Hydraulic breakers HB 3600 s/n DEQ180361 - HB 3600 DP s/n DEQ180361-2018 Construction Tools GmbH No. 3390791301 2018-04-26 General information This spare parts list applies
More informationHB 2500, HB 2500 DP. Spare parts list. Hydraulic breakers. HB 2500 DP s/n DEQ Construction Tools GmbH No
HB 2500, HB 2500 DP Spare parts list Hydraulic breakers HB 2500 DP s/n DEQ180110-2018 Construction Tools GmbH No. 3390791101 2018-05-07 General information This spare parts list applies to the following:
More informationHB 2000, HB 2000 DP. Spare parts list. Hydraulic breakers. HB 2000 s/n DEQ HB 2000 DP s/n DEQ
HB 2000, HB 2000 DP Spare parts list Hydraulic breakers HB 2000 s/n DEQ171469 - HB 2000 DP s/n DEQ171469-2018 Construction Tools GmbH No. 3390791001 2018-11-12 General information This spare parts list
More informationHB 2000, HB 2000 DP. Spare parts list. Hydraulic breakers. HB 2000 s/n DEQ HB 2000 DP s/n DEQ
HB 2000, HB 2000 DP Spare parts list Hydraulic breakers HB 2000 s/n DEQ171469 - HB 2000 DP s/n DEQ171469-2018 Construction Tools GmbH No. 3390791001 2018-01-01 General information This spare parts list
More informationEC 150T. Spare parts list. Hydraulic breakers. EC 150T s/n DEQ Construction Tools GmbH No
EC 150T Spare parts list Hydraulic breakers EC 150T s/n DEQ181223-2018 Construction Tools GmbH No. 3390768001 2018-07-30 General information This spare parts list applies to the following: Part number
More informationConstruction Machine HS 8300 HD. enus HS
Construction Machine HS 8300 HD enus HS 8008.01 Dimensions Basic machine with undercarriage R 35 11 12 43 8 13 11 11 7 10 7 2 19 6 7 3 26 31 4 12 8 9 11 47.2 22 8 27 1 25.2 71 R 25 8 Operating weight The
More informationHydraulic Impact Wrench Type
M a s c h i n e n f a b r i k G m b H Hydraulic Impact Wrench Type 6 1520 0010 Illustration can differ from the original Operation and Maintenance Manual 615200010_en_Version_03 Page 1 of 19 TECHNICAL
More informationEC 120T. Spare parts list. Hydraulic breakers. EC 120T s/n DEQ Construction Tools GmbH No
EC 120T Spare parts list Hydraulic breakers EC 120T s/n DEQ150544-2018 Construction Tools GmbH No. 3390767701 2018-01-01 General information This spare parts list applies to the following: Part number
More informationTechnical data Hydraulic crawler crane HS 845 HD
Technical data Hydraulic crawler crane HS 845 HD Dimensions Basic machine with undercarriage 2870 8000 3000 1800 1330 3350 1100 1200 5000 5920 2500 1590 700 4500 330 R 4580 11860 Operating weight The operating
More informationGround bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD under carriage, 2 main winches 250 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, boom foot (5.5 m) and boom head (5.5
More informationSpare parts list. Hydraulic breakers RX Valid from serial number
Hydraulic breakers Valid from serial number 50 www.cp.com Contents Contents General information............................................................... 5....................................................................
More informationParts List Book CPE CPVS
Code 2205 6010 04 Edition 08/2013 Oil-injected Rotary Screw Compressors Parts List Book CPE125-1 CPVS125-1 People.Passion.Performance. CONTENTS WARRANTY AND LIABILITY LIMITATION... 2 ORDERING SPARE PARTS...
More informationMB 1200 DP. Spare parts list. Hydraulic breakers. MB 1200 DP s/n DEQ Construction Tools GmbH No
MB 1200 DP Spare parts list Hydraulic breakers MB 1200 DP s/n DEQ171453-2018 Construction Tools GmbH No. 3390800601 2018-07-04 General information This spare parts list applies to the following: Part number
More informationMB 1500, 1500 DP. Spare parts list. Hydraulic breakers. MB 1500 s/n DEQ DEQ MB 1500 DP s/n DEQ
MB 1500, 1500 DP Spare parts list Hydraulic breakers MB 1500 s/n DEQ130431 - DEQ170638 MB 1500 DP s/n DEQ130431-2018 Construction Tools GmbH No. 3390731101 2018-01-01 General information This spare parts
More informationELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES
EFFECTIVE: October 21, 2011 ELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES 2 Ton through 20 Ton Capacity Hoist Code and Serial Number This equipment should not be installed, operated or maintained by
More informationGround bearing pressure. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD undercarriage, 2 main winches 55,200 lbs including wire ropes (295 ft) and 36 ft main boom, consisting of A frame, boom foot (18 ft) and boom head
More informationParts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
More informationMG Spare parts list. Multi grapple. MG 2700 s/n BGF Construction Tools GmbH No
MG 2700 Spare parts list Multi grapple MG 2700 s/n BGF057417-2017 Construction Tools GmbH No. 3390775501 2017-01-23 General information This spare parts list applies to the following: Part number Description
More informationConstruction Machine HS 8130 HD. enus HS
Construction Machine HS 8130 HD enus HS 8005.01 Dimensions Basic machine with standard undercarriage 10 11 32 4 17 3 88.6 63 13 59 18 8 11 39.4 12.6 22 1 20 3 54.3 7 R 18 1 17 11 46 3 Operating weight
More informationMB 1650, 1650 DP. Spare parts list. Hydraulic breakers. MB 1650 s/n DEQ MB 1650 DP s/n DEQ
MB 1650, 1650 DP Spare parts list Hydraulic breakers MB 1650 s/n DEQ180501 - MB 1650 DP s/n DEQ180501-2018 Construction Tools GmbH No. 3390790701 2018-04-06 General information This spare parts list applies
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationHydraulic Diaphragm Wall Grab Mechanical Diaphragm Wall Grab Stop End Pipes Hydraulic Tube Extracting Equipment Interlocking Tremie Pipes
Hydraulic Diaphragm Wall Grab Mechanical Diaphragm Wall Grab Stop End Pipes Hydraulic Tube Extracting Equipment Interlocking Tremie Pipes Hydraulic Diaphragm Wall Grab H Technical Data Hydraulic tilting
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationVolute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive. Series CNH-M
Volute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive Series CNH-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationCrawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
More informationView thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom
More informationSpare parts list. Hydraulic breakers RX Valid from serial number
Hydraulic breakers Valid from serial number 50 www.cp.com Contents Contents General information............................................................... 5....................................................................
More informationMB Spare parts list. Hydraulic breakers. MB 1000 s/n DEQ Construction Tools GmbH No
MB 1000 Spare parts list Hydraulic breakers MB 1000 s/n DEQ170832-2018 Construction Tools GmbH No. 3390801001 2018-01-01 General information This spare parts list applies to the following: Part number
More informationRepair Manual and Spare Parts List
Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,
More informationInstruction Manual. High Lift Hand Truck
Instruction Manual High Lift Hand Truck Note: The Owner/Operator must read carefully and understand all the information presented here before operation. CONTENT 1. Specification. 2 2. Safety Instructions...
More informationBP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ
BP 2050, 2050 R Spare parts list Bulk pulverizer BP 2050 s/n DEQ169181 - BP 2050 R s/n DEQ169181-2018 Construction Tools GmbH No. 3390756701 2018-01-01 General information This spare parts list applies
More informationBP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ
BP 3050, 3050 R Spare parts list Bulk pulverizer BP 3050 s/n DEQ169179 - BP 3050 R s/n DEQ169179-2018 Construction Tools GmbH No. 3390758101 2018-01-01 General information This spare parts list applies
More informationpreliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine
Technical Specifications SENNEBOGEN Tracked Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight R/Crawler Undercarriage Cummins QSB., Tier Final 13 HP (97 kw)
More informationLPD. Spare parts list. Post drivers heavy-duty HD-T, HD-RV Atlas Copco Construction Tools AB No f
LPD HD-T, HD-RV Post drivers heavy-duty Contents Contents General information................................................................ 5.....................................................................
More informationMATERIAL HANDLER MHL320 D. Specifications. Features
MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads
More informationFlow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
More informationPneumatech. Heatless adsorption compressed air dryers PH 55 HE, PH 65 HE, PH 75 HE, PH 105 HE, PH 130 HE, PH 150 HE, PH 170 HE, PH 210 HE, PH 310 HE
Pneumatech Heatless adsorption compressed air dryers PH 55 HE, PH 65 HE, PH 75 HE, PH 105 HE, PH 130 HE, PH 150 HE, PH 170 HE, PH 210 HE, PH 310 HE Parts list Pneumatech Heatless adsorption compressed
More informationMG 100. Spare parts list. Multi grapple. MG 100 s/n DEQ Construction Tools GmbH No
MG 100 Spare parts list Multi grapple MG 100 s/n DEQ176000-2018 Construction Tools GmbH No. 3390802401 2018-01-01 General information This spare parts list applies to the following: Part number Description
More informationPneumatic Angle Grinder also for Underwater Use Type
M a s c h i n e n f a b r i k G m b H Pneumatic Angle Grinder also for Underwater Use Type 1 4311 0050 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 22.06.11 143110050_Inst_en_Version_00
More informationLHD. Spare parts list 23 M. Rock drills Construction Tools PC AB No
LHD 23 M Spare parts list Rock drills 2015 Construction Tools PC AB No. 3392 5014 01 2015-06 General information This spare parts list applies to the following: Part number Description 1801 3800 01 (clockwise
More informationRepair Manual and Spare Parts List
Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,
More informationSPARE PARTS LIST TRIMMERS/EDGERS 325 E X-SERIES,
SPARE PARTS LIST TRIMMERS/EDGERS 325 E X-SERIES, 2001-01 ACCESSORIES 325 E X-SERIES, 2001-01 ACCESSORIES 325 E X-SERIES, 2001-01 Ref Part No Description Remark QTY KIT 501 60 02-03 SCREWDRIVER 1 502 11
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps. V Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationPneumatic Circular Saw. Type Illustration can differ from the original. Spare Parts List
Pneumatic Circular Saw Type Illustration can differ from the original Cleaning Regular cleaning is required for a continuous and proper operation. Clean the housing regularly with a soft cloth, it is important
More informationCrawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
More informationSERIES HYDRAULIC EXCAVATORS CX225SR
CX SERIES HYDRAULIC EXCAVATORS CX225SR Engine Latest generation engine meeting European standards (tier 2 regulations) low smoke emissions. CASE, since the first machines in the CX series were introduced,
More informationSPARE PART LIST LW 300 E & LW 450 E
SPARE PART LIST LW 300 E & LW 450 E Nautico Maldives Pvt Ltd H. Oleander Hiththafinivaa Magu Male' Tel: + 960 31 52 53 Fax: + 960 32 44 96 Mobil: 00960 77 23 81 --------00960 77 88 79 E-mail: nautico@dhivehinet.net.mv
More informationCrawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
More informationSpare parts list. Post drivers heavy-duty PDR 95 T, PDR 95 RV.
Spare parts list Post drivers heavy-duty PDR 95 T, PDR 95 RV www.cp.com 339 536 0b Contents Contents General information............................................................... 5 Spare parts list....................................................................
More informationSB Spare parts list. Hydraulic breaker Construction Tools PC AB No
SB 1102 Spare parts list Hydraulic breaker 2016 Construction Tools PC AB No. 9800176601 2016-11 General information This spare parts list applies to the following: Part number Description 8460030090 SB
More informationGround bearing pressure 1.1 kg/cm 2 2 HS 855 HD
The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting
More informationSB 302. Spare parts list Hydraulic breakers. SB 302 s/n BES Construction Tools PC AB No g
SB 302 Spare parts list Hydraulic breakers SB 302 s/n BES043707 2018 Construction Tools PC AB No. 9800083101g 2018-01 General information This spare parts list applies to the following: Part number 8460030060
More informationSuspension strut, removing and installing
Page 1 of 18 42-24 Suspension strut, removing and installing Removing Vehicle must be standing on its wheels above vehicle lift - Remove wheel trim. On light alloy wheels use puller in vehicle tool kit
More informationSPARE PARTS LIST POLE PRUNER/POLE SAWS 327 P4
SPARE PARTS LIST POLE PRUNER/POLE SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 537 04 07-10 ACCESSORY BAG 1 2 501 69 17-01 COMBINATION WRENCH 1 3 502 21 58-01 WRENCH 1 4 503 97
More informationMG 400. Spare parts list. Multi grapple. MG 400 s/n BGF Construction Tools GmbH No
MG 400 Spare parts list Multi grapple MG 400 s/n BGF074759-2016 Construction Tools GmbH No. 3390774801 2016-07-21 General information This spare parts list applies to the following: Part number Description
More informationHPP09E Hydraulic Powerpack
HPP09E Hydraulic Powerpack From serial number 13885 Revised 22.11.2018 Prior to Operation We thank you for choosing a HYCON powerpack. Please note that the powerpack is delivered without hydraulic oil,
More informationSTAND MODEL FOR MACH M2
Mounting instructions Directions for use STAND MODEL FOR MACH M2 Stand lamps: Mach M2... Mach M2 F... Order No. 170 120 1300 Order No. 170 230 1300 GmbH u. Co. KG, Flossmannstrasse 28, D-85560 Ebersberg
More informationTechnical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
More informationTechnical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
More informationSPARE PARTS LIST. POLE PRUNER/POLE SAWS 327 P5x
SPARE PARTS LIST POLE PRUNER/POLE SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 537 04 07-10 ACCESSORY BAG 1 2 501 69 17-01 COMBINATION WRENCH 1 3 502 21 58-01 WRENCH 1 4 503 98
More informationHydraulic lift crane LR 1110 LR
Hydraulic lift crane LR 111 EN LR 11.2 Concept and characteristics LR 111 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin with improved and ergonomic operating
More informationMG 300. Spare parts list. Multi grapple Atlas Copco Construction Tools GmbH No
MG 300 Spare parts list Multi grapple 0 Atlas Copco Construction Tools GmbH No. 3390 7354 0 0046 MG 300 Contents Contents General information................................................................
More informationMATERIAL HANDLER MHL360 F HD. Features. Specifications
MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 223 L,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 223 L, 2006-01 ACCESSORIES 223 L, 2006-01 ACCESSORIES 223 L, 2006-01 Ref Part No Description Remark QTY KIT 1 501 78 33-01 SUSPENSION BAIL 1 2 503 21 83-16 SCREW
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 240 R,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 240 R, 2005-09 ACCESSORIES 240 R, 2005-09 ACCESSORIES 240 R, 2005-09 Ref Part No Description Remark QTY KIT 501 19 22-01 TOOL CASING 1 501 60 02-03 SCREWDRIVER
More informationMATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m
MHL36 E MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach Features 1,5 lbs 46 t 255 hp 19 kw Up to 59 ft 18 m Fuel saving ECO & ECO+ operating modes enhance flexibility while
More informationACROBAT SWING STAND MODEL
Mounting instructions Directions for use ACROBAT SWING STAND MODEL Stand lamps: Mach 120... Mach 120F... Mach 130... Mach 130F... Mach LED 120... Mach LED 120F... Mach LED 130... Mach LED 130F... Order
More informationVolute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
More informationDC Spare parts list. Transverse Drum Cutters. DC 2100 s/n DEQ Construction Tools GmbH No
DC 2100 Spare parts list Transverse Drum Cutters DC 2100 s/n DEQ140172-2015 Construction Tools GmbH No. 3390771401 2015-05-05 General information This spare parts list applies to the following: Part number
More informationFULL OPERATING AND MAINTENANCE MANUAL
Enter Serial No. here. In the event of an enquiry please quote this serial number. www.monoequip.com FULL OPERATING AND MAINTENANCE MANUAL FOR THE STAND ALONE DIVIDER FG398 Stand alone divider REV.A17
More informationSPARE PARTS LIST. BRUSHCUTTERS/CLEARING SAWS 326 RJX, from
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 326 RJX, from 2009-05 ACCESSORIES 326 RJX, from 2009-05 ACCESSORIES 326 RJX, from 2009-05 Ref Part no. Description Remark Qty Kit 1 502 28 59-01 STOP 1 2 502
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 325 RX,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 325 RX, 2008-03 ACCESSORIES 325 RX, 2008-03 ACCESSORIES 325 RX, 2008-03 Ref Part No Description Remark QTY KIT 1 531 00 92-48 FILTER OIL 1 2 502 28 59-01 STOP
More information1200, 1200 DP. Spare parts list. Hydraulic breakers. Valid from serial number Atlas Copco Construction Tools GmbH No
MB 00, 00 DP Spare parts list Hydraulic breakers MB 00 MB 00 DP Valid from serial number 800 800 0 Atlas Copco Construction Tools GmbH 3390 7036 0 00807 MB 00, 00 DP Contents Contents General note.......................................................................
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationIC-20-J. Tech Spec. Industrial Crane. Features the exclusive rotating boom
Tech Spec IC-20-J Industrial Crane Features the exclusive rotating boom Capacity on Outriggers... 5,000 lbs (2,270 kg) Pick and Carry Capacity... up to 2,500 lbs (1,130 kg) Height... 5 6 (1.66 m) w/o Operator
More informationSpare parts list. Handheld core drills. Valid from serial number LPD-T LPD-RV Construction Tools PC AB No
LPD T, RV Spare parts list Handheld core drills Valid from serial number LPD-T 254682 LPD-RV 254682 LPD-T LPT-RV BGF000001 BGF000001 2015 Construction Tools PC AB No. 3392 5037 01 2015-06 General information
More informationTH23 POWER HOOK Spare Parts Manual
TH23 POWER HOOK Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:
More informationPS Powder Sieve Machine
Spare Parts List Issued 07/95 PS Powder Sieve An ITW Company 7 Spare Parts List 7.1 Ordering Spare Parts When ordering spare parts for powder coating equipment, please indicate the following specifications
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationTRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.
TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional
More informationThermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
More informationOriginal instructions 1/15 PARTS MANUAL PMHB-550ENG.115 HYDRAULIC HAMMER HB-550
Original instructions 1/15 PARTS MANUAL PMENG.115 HYDRAULIC HAMMER TABLE OF CONTENTS 1.1. Housing unit 6 1.2. Impact unit 8 1.3. Seal set 10 1.4. Service kit 12 1.5. Service kit 2 13 1.6. Tool box 14 GENUINE
More information1993 SUSPENSION Volkswagen Rear. EuroVan
Article Text ARTICLE BEGINNING 1993 SUSPENSION Volkswagen Rear EuroVan DESCRIPTION Suspension uses control arms and axle beam for stabilization. Control arms and axle beam are combined as one unit. Brake
More informationStanley MB/XP2620. HYDRAULIC BREAKER Parts Manual. Part Number PMMB/XP2620XENG.B17
Stanley MB/XP2620 HYDRAULIC BREAKER Parts Manual Part Number PMMB/XP2620XENG.B17 Contents Housing Unit...4 Accumulator...6 Main Valve...7 Restrictor Valve...8 Pressure COntrol Valve...10 Tie Rods...12
More information