Spare parts list. Hydraulic breakers RX Valid from serial number

Transcription

1 Hydraulic breakers Valid from serial number 50

2

3 Contents Contents General information Hydraulic breaker Percussion unit part : cover Percussion unit part : main body complete Tightening torques Working tools Accessories Hydraulic hoses Optional equipment Kits Seal kit Label kit Dimensions

4 4

5 General information This spare parts list applies to the following: Part number Hydraulic breaker Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 5

6 Hydraulic breaker

7 No. Remark Quantity Part number (-4) Percussion unit Elastic pad Shock absorber Guide plate Guide plate Guide ring Cap Transport safety device complete Transport safety device Allen screw Label transport safety device Nut Plate Cover Pair of lock washers Allen screw Plate Plug Plug Plug Plug Sleeve Lifting eye Breaker box see separate chapter with 3 times no. 40 with 4 times no. 40 professional welding process necessary with no

8 Percussion unit part : cover X X 8

9 No. Remark Quantity Part number (8-83) (9-93) (9-9) 9 9 Cover O-ring Main control valve Cover Cap O-ring Allen screw Fitting Cap Pair of lock washers Plate spring Disk O-ring Threaded insert Screw plug Screw plug Filling valve complete Filling valve Threaded plug O-ring Bolt complete Bolt Washer Seal bush Seal Seal Seal kit Seal Back-up ring with no with no. 60 observe mounting direction

10 Percussion unit part : main body complete

11 No. Remark Quantity Part number (39-39) O-ring Seal Main body Cylinder bush Wiper Seal Seal Seal Retainer bar Bolt Protective cap O-ring Percussion piston Lock pin Impact ring Wear bush Threaded insert Bolt O-ring Non-return valve Grease nipple Seal kit Seal Back-up ring with no

12 Tightening torques No. Tightening torque Remark Allen screw Allen screw Fitting Filling valve Threaded plug Bolt Non-return valve 85 Nm 00 Nm 330 Nm 30 Nm 0 Nm 00 Nm Allen key size 0 Allen key size 4 Open-end wrench size 46 Socket spanner size Allen key size 5 Torque wrench or Power wrench size 4. Pretighten the bolts to 00 Nm, proceeding in a crosswise fashion,. again pretighten the bolts to 00 Nm, proceeding in a crosswise fashion, 3. then tighten each bolt through 60 ( sides of hexagonal head) in a crosswise fashion, 4. finally tighten each bolt again through 90 ( ½ sides of hexagonal head) in a crosswise fashion. Socket wrench size 7

13 Working tools 3 35 (5.3) L W L T Metric No. Remark W (mm) L (mm) L T (mm) Wt (kg) Part number 3 Moil point Chisel (cross) Blunt tool Imperial No. Remark W (in.) L (in.) L T (in.) Wt (lb) Part number 3 Moil point Chisel (cross) Blunt tool

14 Accessories Hydraulic hoses Remark Quantity Part number Hose Hose I.D. 5 ("), both ends M 4x conical seal 4, length 300 mm (9 in.) I.D. 5 ("), both ends M 4x conical seal 4, length 800 mm (0 in.) Optional equipment Chisel paste cartridge for grease gun and CP-Lube Grease gun for cartridge Service box with nitrogen cylinder Service box without nitrogen cylinder Test gauge lower wear bush Inside callipers upper wear bush Adapter plate matching the carrier Consult the Chicago Pneumatic Customer Center/Dealer in your area. Base plate with through borings Bolt kit Allen key CP-Lube kit Dust wiper HD kit Remark 30 x 500 g (. lbs) l 0.43 gal (0.53 US gal) 9 mm for bolt kit reinforcement for breaker box Quantity Part number

15 Kits Seal kit No. Remark Quantity Part number Seal kit Label kit No. Remark Quantity Part number Label kit

16 Dimensions mm (inch) (9.49) 47 (.85) 630 (4.80) (66.93) Ø 33 (9.49) (6.73) (.38) (.) (4.53) 40 (.58) (6.73) (.65) (4.9) (.58) (4.80) 95 (.6) 565 (.4) 45 (6.73) Ø (.30) Ø 35 (5.3) 6

17 7

18 8

19 9

20 0--3 No. Copyright Atlas Copco Construction Tools GmbH ESSEN GERMANY