BA series - brake motors. for wind turbine generators
|
|
- John Jones
- 6 years ago
- Views:
Transcription
1 series brake motors for wind turbine generators
2 general information on MGM brake motors MGM brake motors are asynchronous three phase totally enclosed fan cooled motors. In case of power failure motors brake ensuring a precise stop and emergency braking action. This security feature provides immediate intervention when there is unintentional power supply failure (f.e. power supply black out, equipment failure). The braking action is obtained without axial sliding of the shaft and provides equal braking torque in both directions of rotations. MGM brake motors are especially suitable in all situations where precision and rapid braking is required, or to reduce production cycles in fixed spaces and times. MGM brake motors are not a simple assembly of a standard motor with a brake group but rather they are specifically designed as complete brake motors; the perfect engineering and assembling combined with a strong and safe brake guarantee a great reliability. MGM brake motors are designed to withstand a high number of starts and stops. The brake disc lining material is asbestos free with a high friction coefficient and a long life span. The motors are supplied as standard with an IP54 protection degree; class F insulation materials are used. On request it is possible to have higher protection degree (IP55, IP56) and class H insulation. All MGM motors are suitable to operate with inverters. On request it is possible to supply the motor with a second shaft end to fit tachogenerator or encoder. MGM brake motors range displayed on the table consists of (725) and BM (63132) series. series brake motors have a very strong AC or DC brake while BM series brake motors have a soft and low noise DC brake. series brake motors for wind turbine generators series brake motors are widely used on yaw and pitch systems of wind turbine generators. The series consists of three phase, asynchronous brake motors starting from 71 frame size up to 225. The motors are equipped as standard with an AC brake while DC brake is available on request. The DC brake rectifier is located inside the terminal board box and it s supplied as standard with an over voltage safety protector. It is possible to choose between many different motor voltage supplies. The braking torque adjustment is a very simple operation and a wide braking torque is available. On request it s possible to order the brake motor with the braking torque adjusted according to the application requirements. All series motors are provided with manual brake release and a hexagonal hole for the manual shaft rotation. The brake disc has a large friction surface that allows the adjusting of the air gap at long maintenance intervals. The brake surface is selfventiled and this solution allows constant braking time and a high braking workload, specially required in the wind turbine applications. The brake lining material is asbestos free. The brake surface and the brake moving element are cast iron made. The brake moving element and brake coil have a laminated core to reduce electrical losses and to ensure an extremely quick brake intervention. The frame is die cast made up to 132 frame size and cast iron from 160 to 225. The shields and the flanges are aluminium made up to frame size and cast iron from 100 to 225. On request it s possible to supply special motors suitable for offshore wind turbine generators. MGM can provide E series brake motors with integrated encoder. MGM motors can also be provided with ccsaus approval for the North American market. For further available options please contact MGM technical support. series main features are a particularly solid construction, a very short braking reaction time, a high and constant braking torque, mainly needed to ensure precision in positioning, the capability to handle frequent and heavy load braking cycles, long maintenance intervals, a very simple construction that makes easier any custom adjustment. All those things make the series motors really suitable for wind turbine generators. E
3 product range The table below shows the brake motors production range and their series: BM,. Motor Series 2pole 4pole 6pole 8pole 2 / 4pole 4 / 8pole 2 / 6pole 2 / 8pole 4 / 6pole 4 / pole 2 / pole type kw kw kw kw kw kw kw kw kw kw kw (S3) 4 / 16pole kw (S4 40% 4pole 25% 16pole) 56 A BM B BM A BM B BM / C BM / / D BM A BM / / B BM / / / / C BM / / / / D BM 0.65 A BM / / / / / /0.05 B BM / / / / / / /0.07 C BM 0.9 SA BM / / / / /0.11 SB BM 11.3/ /0.18 LA BM / / / / /0.15 LB BM / / / / / /0.22 LC BM LA BM / / / / / LB BM / /0.9.2/0.8.2/ / / / MB BM /3.3.2/ / /0.8.0/ / / SA BM / SB BM / / / /1.1.2/ / MA BM / / / / / / / / MB BM / / / / / / / / MA BM / / MB BM / / / / / / / / LA BM / / / / / LB BM / / /2.5 1 LA BM / / / /3.0 1 LB BM / / / / / /2.6 0 LA BM / LB BM / / / / S BM /.0.0/ / / M BM / /25.0.0/ /6.0 braking torque and brake reaction time TYPE A.C. Brake Max braking torque (Nm) D.C. Brake BM D.C. Brake A.C. Brake D.C. Brake (normal) Brake reaction time (ms) D.C. Brake (quick) BM BM D.C. Brake (normal) D.C. Brake (quick)
4 Flange and cover in cast iron starting from 100 frame size. The motors tolerate a high degree of overloading and have a high capability to withstand overheating, that guarantees high reliability, also under severe operating conditions. Ball bearings with double seal. Winding for 400/6 V 50 Hz (available on request). Motors with efficiency class EFF 2 or EFF 1 (available on request). Special execution for offshore application (available on request). Cast iron frame starting from 160 size. B3 foot mounted execution has integrated support feet giving to the structure a notable robustness.
5 C US homologation in conformity with the requirements of standards UL 1004 Electric motors and CSA C 22.2 No Motors and generators (available on request). Rear cover braking surface in cast iron. Braking torque easily adjustable Hexagonal hole for manual shaft rotation. Self ventilating braking surface. New brake disc to allow a longer life. Magnet core with a lamina structure which allows higher efficiency and quicker brake reaction time.
6 EDITRICE ARTISTICA SSANO 04 M.G.M. motori elettrici S.p.A. Head office and production S/R 435 Lucchese Km Serravalle Pistoiese (PT) Italy Tel Fax Web site: North Italy branch office Via Fermi, 44 0 Assago (MI) Italy Tel Fax The data and the characteristics shown in this catalogue are not binding and are subjected to any changes without previous notice I26E0004
TYPE 2 poles 4 poles 6 poles 8 poles 2 / 4 poles 4 / 8 poles 2 / 8 poles 4 / 16 poles
BAH-BAHS series Overwiew MGM Electric Motors was established in 1950 as a brake motors manufacturer. MGM is today a world leading manufacturer of this line of products. MGM brake motors are designed and
More informationBrake motors ISO 9001: Certified Quality System
BRAKEMOTORES 3F Brake motors ISO 01: 0 Certified Quality System Index BA series General Characteristics 2 GENERAL INFORMATION PRODUCT RANGE: POWER AND POLE MOTOR DESIGNATION STANDARDS AND APPROVALS CE
More informationTn (Nm) Ts/Tn. Is/In
Technical Data Single Speed Motor Single Winding Motor type 2 pole Power (kw) RPM In V (A) Power factor Cos ϕ Tn (Nm) Ts/Tn Is/In AC brake In (ma) DC brake In (ma) Z 0 (starts/ hour) Moment of inertia
More informationBAH series Use and Maintenance Manual
Page 1 of 15 BAH 225-280 series Use and Maintenance Manual Page 2 of 15 We would like to thank you for trusting us and buying our product. Field of application Before starting the motor, it s necessary
More informationTn (Nm) Ts/Tn. Is/In
Technical Data Two Speed Motor Single Winding Motor type 4 / 8 pole Power (kw) RPM In V (A) Power factor Cos ϕ Tn (Nm) Ts/Tn Is/In AC brake In (ma) DC brake In (ma) Z 0 (starts/ hour) Moment of inertia
More informationCertificate of Compliance
FF0002 Certificate of Compliance Certificate: 1309537 Issued to: M.G.M. Motori Elettrici S.p.A. Via E. Fermi, 44 Assago (MI) / 20090 ITALY The products listed below are eligible to bear the CSA Mark shown
More informationLow Voltage Induction Motors
Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,
More informationHigh Torque Brake Motors Three Phase - Single Phase Technical Datasheets
High Torque Brake Motors Three Phase - Single Phase Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers
More informationFCR asynchronous brake motors LS FCR. General information
General information LIFTING USE : U.L. Enclosed three-phase asynchronous brake motors, LS series with failsafe brake, according to IEC 34, 72, EN 50281. Single speed : 0.55 to 15, frame size from 80 to
More informationModular Flameproof Brakes
Modular Flameproof Brakes New, Easy, Strong 2012 rev 0 INDEX PAG1 PAG2 PAG3 PAG4 PAG5 PAG6 PAG7 PAG8 PAG9-12 About VIS Application example, Main characteristics, Standards Certificates and available protection
More informationA.C. Motor for Railway. Auxiliary Application
A.C. Motor for Railway Auxiliary Application EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase
More informationCatalog Mars Low voltage Brake motors
Catalog Mars 2014 Low voltage Brake motors We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the total
More informationSMI SERIES MOTORS WITH INTEGRATED INVERTER
SERIES MOTORS WITH INTEGRATED INVERTER Series series is made up of three-phase asynchronous electric motors with integrated frequency inverter.power range is between 0,37 kw and 4 kw, while motor axis
More informationMINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280
More informationA6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
More informationCPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
More informationVariable speed asynchronous motors with FCPL brake LSMV FCPL. General information
General information GENERAL USE : U.G. Enclosed three-phase asynchronous brake motors, LSMV series with failsafe continuous current (dc) brake, according to IEC 60034, 60072, EN50281. Separate mains supply
More informationOrdering information. When placing an order, specify motor type, size and product code according to the following example.
Ordering information When placing an order, specify motor type, size and product code according to the following example. Example Motor type M3AA 112 MB Pole number 4 Mounting arrangement (IM-code) IM
More informationMINING ELECTRIC MOTORS 3KTCR AND 4KTCR
MINING ELECTRIC MOTORS 3KTCR AND 4KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280 Frame
More informationAEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
More informationStandardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
More informationGMP-Type. Key Features: Integrated Motor-Pump Units
Integrated Motor-Pump Units GMP-Type Key Features: Direct coupling between motor and pump Rotation: Right (viewed from shaft end) Electric motor mounting type: special B3-B14 (IEC 34-7) Rated Voltage:
More informationLARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. MASS [Kg] STROKE T STROKE LENGTH STROKE LENGTH. standard brake CODE
BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS BSA 10 AC motor Stroke La =Lc + Stroke Lc Capacitor T Rear bracket SP Pin Standard head with threaded hollow bore BA 80 depth 17 Stroke end reed switches FCM
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationTHREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE
CAG Electric Machinery HGLIE2 series THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE Introduction Motors HGL IE2 with cast iron frame offers increased power output with reduced power consumption. This
More informationDrive IT Low Voltage General Purpose Motors
Drive IT Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motors are readily available from central stock locations and distributors throughout the world. While designed
More informationLow and Medium Voltage Motors. 21-FII Series. New High Efficiency Design 37 kw 1,400 kw (50 HP 1,850 HP)
Low and Medium Voltage Motors 21-FII Series New High Efficiency Design 37 kw 1,400 kw (50 HP 1,850 HP) Meets World Wide 21-F Series High performance reduces cost of ownership Compact size reduces cost
More informationIP66 GSW GEAR BOX MOTOR SERIES
IP66 GSW GEAR BOX MOTOR SERIES Three Phase Aluminium Gear Box Motors Australian Version October 2013 CONTENTS INTRODUCTION Pg 3 MATERIALS AND CONSTRUCTION Pg 3-4 SERIES OVERVIEW Pg 5 PERFORMANCE DATA Pg
More informationSYSTEM COMPONENTS ELECTRIC MOTORS
SYSTM COMPONNTS LCTRIC MOTORS 2 lectric Motors POWR JACKS CAN SUPPLY LCTRIC MOTORS OR ALL APPLICATIONS WHTHR AC OR C MOTORS AR RQUIR. C & -Series Screw Jacks Company Overview Capability 1 3 OUR XPRTIS
More informationAC Synchronous Reluctance motors
AC Synchronous Reluctance motors AC Synchronous Reluctance Motors Invented many years ago but developed for production in series only recently the Synchronous reluctance motors combine the advantage of
More informationANNEX No 1. C 17/05/2006 SGA112B TERMINAL BOX ARRANGEMENT Ex e, Ex na &Ex td V (OPTION 2)
ANNEX No 1 DRAWINGS Drawing No. Drawing Description Revision Date Ex e, na and td SGA100A General Arrangement for SGA 71 frame motor C 16/06/2006 SGA101A General Arrangement for SGA 80-132 frame motor
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH
BALL SCREW LINEAR ACTUATOR BSA 2 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T Capacitor Rear bracket Pin SP Standard head with threaded hollow bore BA depth 7 Stroke end reed switches FCM (brake motor)
More informationACME SCREW LINEAR ACTUATOR. Current [A] PERFORMANCES with AC 3-phase 50 Hz 230/400 V or 1-phase 50 Hz 230 V motor
ACME SCREW LINEAR ACTUATOR CLA 28 OVERALL DIMENSIONS La = Lc + Stroke Stroke Lc T Standard head with threaded hollow bore BA Motor cable length 0.3 m Bronze bushes depth 17 Lc [mm] T [mm] Length [mm] +
More informationRossi S.p.A a company of the Habasit Group -Copyright: all right reserved- Author: R&D - Electric Motors Division 1
www.wmmotors.com Rossi S.p.A. 2011 a company of the Habasit Group -Copyright: all right reserved- Author: R&D - Electric Motors Division 1 The Company WM Motors srl was born in mid-2013 on a covered area
More informationBRAKE MOTORS. 1. Brake motors TECHNICAL CATALOGUE. M Series / Standard / IEC
1. Brake motors Standard motors (TS, TH, TP, D) can be constructed as brake motors (TBS, TBH, TBP, DB) when the driven machine must be stopped quickly and safely. This is done without modifying the motor
More informationCustomised drive solutions
Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous
More informationSquirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2
Marine Motors Three Phase Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES 63-400 SIZES MarelliMotori ASI.CT.033.2 CONTENTS Page STANDARDS 5 ESSENTIAL AND NON-ESSENTIAL SERVICE 5 CLASSIFICATION
More informationVariable speed asynchronous motors with FCR brake LSMV FCR. General information
General information GENERAL USE : U.G. Closed three-phase asynchronous brake motors, LSMV series with failsafe continuous (dc) brake, according to IEC 3, 72, EN 50281. Single speed : 0.25 to 11, frame
More informationCEB 71204/a of 13 december 2005 SLSHR. 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw
CEB 71204/a of 13 december 2005 SLSHR 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw C.E.B. SLSHR RANGE TECHNICAL CATALOGUE 05/12/13 CONTENTS CONTENTS 2 APPLICATIONS
More informationTHREE PHASE ASYNCHRONOUS MOTORS. MS/S Series (frame Aluminum) TC Series (frame Cast iron) Y Series (frame Cast iron)
THREE PHASE ASYNCHRONOUS MOTORS MS/S Series (frame 56-200 Aluminum) TC Series (frame 160-355 Cast iron) Y Series (frame 132-355 Cast iron) INDICE 01. General features p.03 02. Standards p.04 03. Mounting
More informationAESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
More informationSeries E4F E5F
Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical
More informationAESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
More informationACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor
ACME SCREW LINEAR ACTUATOR ATL 10 AC motor Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore 80 BA depth 17 Stroke end reed switches FCM
More informationASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
More informationKAT.NMST ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST
KAT.NMST.02.14.ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST 90 355 IMPORTANT NOTE: Due to the continious development policy, our companyreserves the right to make changes the values, dimensions
More informationHigh Efficiency Induction Motors IE2. MarelliMotori MAQ - BAQ SERIES FRAME SIZES ASI.CT GB
High Efficiency Induction Motors MAQ - BAQ SERIES 80-280 FRAME SIZES IE2 MarelliMotori ASI.CT.043.5 GB - High efficiency motors IE2 - www.marellimotori.com International standards for motor efficiency
More informationA product of Coel Motori Srl, Milano, Italy
A product of Coel Motori Srl, Milano, Italy www.coelmotori.it Page 1 Description 2 General Features 3 Mounting 4 Motors 5 PMT85 Performances data 6 PMT95 Performances data 7 PMT105-125 Performances data
More informationDesign features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake
NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features
More informationAsynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationHIGH EFFICIENCY INDUCTION MOTORS COMBROHEF001_=
COMBROHEF001_= HIGH EFFICIENCY INDUCTION MOTORS High efficiency induction motors General specifications Rated outputs and efficiency values are in accordance with IEC 60034-30-1 all parameters are measured
More informationLSES high efficiency three-phase asynchronous motors. General information
Efficiency class IE2 General information Totally enclosed three-phase saving asynchronous motors, series, according to IEC 60034, 60038, 60072 ; 0.75 to 200 kw, frame size 80 to 315 mm. Single speed: 2,4
More informationCOMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS. IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series
COMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series 03 07 07 08 12 15 15 16 18 20 SPECIFICATIONS AND STANDARDS IE1 - MAA / BAA Series Technical
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Length [mm] Stroke Stroke LENGTH
BALL SCREW LINEAR ACUAOR BSA 11 AC motor OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc Capacitor Rear bracket SP Pin Standard head with threaded hollow bore BA 80 depth17 Stroke end reed switches FCM (brake
More informationLSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
More informationCORE VALUES TECHNOLOGIES ESS-ESD PRODUCT CATALOGUE Enjoy the peace of mind ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT
TECHNOLOGIES ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT Enjoy the peace of mind ESS-ESD PRODUCT CATALOGUE CORE VALUES PEACE OF MIND EFFICIENCY FAIRNESS RESPONSIBILITY CUSTOMER ORIENTATION GROWING DEVELOPED
More informationATL 12 ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. La =Lc + Stroke Lc T. Rear bracket SP. Stroke. Capacitor
ACME SCREW LINEAR ACTUATOR Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore BA depth 17 Stroke end reed switches FCM Lenght Stroke 300
More informationPLSES 4500 IMfinity Platform. IP23 high-speed induction motors Industrial refrigeration Variable speed Frame size 225 to to 480 kw
IMfinity Platform IP23 high-speed induction motors Industrial refrigeration Variable speed Frame size 225 to 315 100 to 480 kw The answer to the highly demanding cold storage sector Companies that use
More informationMARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES , KW
MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 56-160, 0.09-18.5KW MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 56-160, 0.09-18.5KW INTRODUCTION 3 Standards
More informationIEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications
IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
More informationIEC Low Voltage Induction Motors 460 V 60 Hz. Motors for all applications
IEC Low Voltage Induction Motors 460 V 60 Hz Motors for all applications Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
More informationHoist Brake Motor. Hoist Gearbox Reeving Wire Rope Construction
DR11 Monorail Hoist Hoist Brake Motor Hoist Gearbox Reeving Wire Rope Construction Rope Drum Trolley Brake Motor Trolley gearbox Trolley Trolley Wheels Load Block Hoist VFD Controls Trolley VFD Controls
More informationLSES high efficiency three-phase asynchronous motors General information
General information Efficiency class IE2 Totally enclosed three-phase powersaving asynchronous motors, LSES series, according to IEC 60034, 60038, 60072 ; power 0.75 to 200 kw, frame size 80 to 315 mm.
More informationPower & Distribution Transformers
Motors Automation Energy Transmission & Distribution Coatings Power & Distribution Transformers USAPTX13.REV.3-22-18 www.weg.net Simple... WEG WILL Make it easy to do business Handle complex specifications
More informationIndustrial Performance Motors. New Aluminum and Cast Iron Motors. Flexibility
Industrial Performance Motors New Aluminum and Cast Iron Motors Flexibility Low Voltage Industrial Performance Motors Flexibility Industrial performance motors offer the flexibility needed by most of our
More informationW22 Brake Motor Three-phase Electric Motor
Motors Automation Energy Transmission & Distribution Coatings W22 Brake Motor Three-phase Electric Motor African Market -- Visual index Main motor parts 1 Sealing system 8 Fan 2 Endshields 9 Bridge rectifier
More informationDELPHI THREE PHASE MOTORS
DELPHI THREE PHASE MOTORS Technical manual Technical Manual delphi series motors rev. 06 Page 1 OF 19 Technical characteristics Rotomotive motors are built according to international standard regulations
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationDemag KB conical-rotor brake motors. Drives with unique principle
Demag KB conical-rotor brake motors Drives with unique principle 37468 Demag KB conical rotor brake motors: Demag KB conical rotor brake motors offered by Demag Cranes & Components feature a unique principle:
More informationchampion series motors
Introducing A brand new series of Super Performers Data Sheet champion series motors FRAME SIZE 63-132M TEFC 3 Phase Squirrel Cage Induction Motors Siemens CHAMPION Series Cage Motors are suitable for
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]
ACME SCREW LINEAR ACTUATOR ATL 02 Stroke Actuator with DC motor La =Lc + Stroke Lc T OVERALL DIMENSIONS Rear bracket SP Pin Actuator with or 3-phase motor Capacitor Stroke end reed switches FCM Motor cable
More informationBuilt-in motors. Contents. Product description 7/2 Overview of technical data 7/3
Built-in motors Contents Product description 7/2 Overview of technical data 7/3 Motor selection data Series W4.R (corresponds to Efficiency IE3) 7/4 Series WE.R (corresponds to High Efficiency IE2) 7/6
More informationODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME
More informationHigh efficiency induction motors
High efficiency induction motors Technical data Type Power Speed Efficiency Power factor Current Rated current Breakdown Sound pressure level Moment of Inertia η cosφ I n T n I s /I n T s T max L pa J
More informationExplosion and flame-proof cast iron electric motors
Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting
More informationLSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80
More informationTHE NEW UNDEROIL SERIES ONLY 110mm Ø UNIQUE WORLDWIDE. AC Motors for Hydraulic Powerpack motors - Underoil motors
THE NEW UNDEROIL SERIES ONLY 110mm Ø UNIQUE WORLDWIDE AC Motors for Hydraulic Powerpack motors - Underoil motors EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group,
More informationTechnical specifications. Wind Turbine GS 21 S. Power 60 kwp
Technical specifications Wind Turbine GS 21 S Power 60 kwp GS 21 S - 60 kwp The best wind turbines, without compromise. In order to exploit the kinetic energy contained in the wind and convert it into
More informationACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Actuator with. Attachment A1. Lc [mm] Stroke Stroke T [mm] Stroke Stroke
ACME SCREW LINEAR ACTUATOR CLA 20 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T La =Lc + Stroke Lc T Rear bracket SP Pin FC switches and potentiometer Attachment A1 Attachment A2 Motor cable length 0.3
More informationPLS Open Drip Proof three-phase asynchronous motors. General information
General information Open Drip Proof three-phase asynchronous motors, series PLS, according to IEC 60034, 60066, 60072 power 7,5 kw to 900 kw, frame size 160 to 400 mm, 2, 4, 6 and 8 ; 230/400 V or 400
More informationHAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis
More informationFlameproof brake motors. Technical data subject to change without notice. BARTEC VARNOST 1
Flameproof brake motors Technical data subject to change without notice. BARTEC VARNOST 1 2 BARTEC VARNOST Technical data subject to change without notice. Flameproof brake motors 4KTC - General performance
More informationbrakes WBA1-75-SC Active Hydraulic Disc Brake experienced, global, reliable wind turbine Customer Options Key Features
WBA1-75-SC The WBA1-75-SC has been specifically designed to meet the exacting requirements of Wind Turbine rotor braking applications, where guaranteed stopping and holding performance is required in both
More informationElECTRIC BRAKE MOTORs Type MAF
June14 www.motor-pump-ventilation.com ElECTRIC BRAKE MOTORs Type MAF Owner s manual Technical caracteristics The motors described in this catalogue are built according to international standard regulations;
More informationFLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
More informationMotors and Gearboxes for Wind Turbines. Durable Environmentally Friendly Low Maintenance
Motors and Gearboxes for Wind Turbines Durable Environmentally Friendly Low Maintenance Reliability in Many Areas ABM develops and manufactures innovative drive solutions of highest quality. As a single
More informationOpen continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
More informationELECTRIC MOTORS. Selection. Starting torque and nominal torque
SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these
More informationSolenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationARAGON MOTO R S. Three Phase Induction Motors
ARAGON MOTO R S Three Phase Induction Motors Introduction PEM series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact
More informationModern Design for Variable Speed Motor-Generators:
Modern Design for Variable Speed Motor-Generators: Asynchronous and Synchronous Electric Machinery Options for Pumped Storage Power Plants SHF - Enhancing Hydropower plants Grenoble, April 9-11, 2014 1
More informationThree-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC.
Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC Product summary VEM motors GmbH Introduction Roller table motors are
More informationW22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
More informationLow Voltage 3-Phase Induction Motors. Range 0.18kW to 670kW
Low Voltage 3-Phase Induction Motors Range 0.18kW to 670kW Totally Enclosed Fan-Cooled Cast Iron Series Contents page page PRODUCT DETAILS General Information 2 Electrical Design and Standards Altitude
More informationREEL SuPremE The IE5* magnet-free synchronous reluctance motor
High Efficiency Drives REEL SuPremE The IE5* magnet-free synchronous reluctance motor *IE5 acc. to IEC/TS 60034-30-2 up to 15 kw @ 1500 rpm / 18.5 kw @ 3000 rpm (only for 1500 rpm types rated 0.55 kw,
More informationThe Available Solution
The Available Solution ISO 02 NATIONAL ACCREDITATION QUALITY ASSURED OF CERTIFICATION FIRM BODIES POWER TRANSMISSION & CONTROLS GROUP ISO 14001 CERTIFICATION We have achieved ISO 14001 for environmental
More informationDYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors
Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet 0.75 kw to 400 kw Technical catalogue 4936 en - 2012.10 / b Rectifier Simplicity Performance Install and start using your system quickly
More information