APPLICATIONS Water systems for residential, industrial, commercial, multiple housing and farm use.

Transcription

1 Precision-engineered, highquality, rugged MGS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water. s to 1,950 feet and capacities to 65 GPM. Built to deliver long-term, trouble-free service. Floating impeller design resists sand and reduces sand locking. These pumps feature the patented SignaSeal staging system. APPLICATIONS Water systems for residential, industrial, commercial, multiple housing and farm use. SPECIFICATIONS Shell Stainless steel Diameter -7/8" Discharge Stainless steel Discharge Bearing Nylatron Intermediate Bearing (On larger units) Polycarbonate, nitrile rubber and stainless steel Impellers Acetal Diffusers Polycarbonate Suction Caps Polycarbonate with stainless steel insert Thrust Pads Proprietary spec. Shaft and Coupling Stainless steel Intake Stainless steel Intake Screen Stainless steel Cable Guard Stainless steel Check Valve Acetal Agency Listings CSA Nylatron is a registered trademark of Polymer Corp. PENTEK and BERKELEY are registered trademarks of Pentair Water. PRO-SOURCE, SignaSeal and TrimLine are trademarks of Pentair Water. In order to provide the best products possible, specifications are subject to change. MGS STAINLESS STEEL FEATURES Patented Staging System Our proven SignaSeal staging system incorporates a harder-than-sand ceramic wear surface that when incorporated with our floating impeller design, greatly reduces problems with abrasives, sand lockup and running dry. Discharge Corrosion-resistant 00 grade stainless steel for durability in aggressive water. Large octagon wrench area for ease of installation. Discharge Bearing Exclusive self-lubricating Nylatron bearing resists wear from sand. Intake Corrosion-resistant 00 grade stainless steel for durability in aggressive water. Shaft Positive drive from 7/16" hexagonal heavy-duty 00 grade stainless steel. Coupling Stainless steel press fit to pump shaft. Couples to all standard NEMA motors. Shell Highest grade, heavy-walled corrosion-resistant stainless steel. Threaded for easy servicing. Hardware All screws, washers and nuts are corrosion-resistant 00 grade stainless steel. Check Valve Durable internal spring-loaded check valve. Cable Guard Corrosion-resistant stainless steel guard protects motor leads. Tapered ends prevent pump from catching on well. Intake Screen Corrosion-resistant stainless steel. PENTEK XE Motor and wire NEMA standard all stainless construction water-filled motors. Except where noted. 1

2 ORDERING INFORMATION Assembled Pump Pump End Motor Control Box Motor Catalog Length Wt. Catalog Length Weight Catalog Weight Catalog Weight GPM Type HP Stgs. PH Volt Number Inches* Lbs* Number Inches* Pounds* Number Pounds* Number Pounds* 1/ B10P4MS L10P4CMGS 1 8-1/ P4B0005A1 19 1/ B10P4MS051 7 L10P4CMGS 1 8-1/ P4B0005A 19 Wire / B10P4MS L10P4DMGS 1-/4 9-1/ P4B0007A B10P4MS L10P4EMGS 15-1/ 10-1/4 P4B0010A 5 1-1/ B10P4MS L10P4FMGS 19 1 P4B0015A 9 1/ B10P4MS L10P4CMGS 1 8-1/ P4B0005A1 19 SMC-IR / B10P4MS051 7 L10P4CMGS 1 8-1/ P4B0005A 18 SMC-CR051 4 / B10P4MS L10P4DMGS 1-/4 9-1/ P4B0007A 1 SMC-CR B10P4MS L10P4EMGS 15-1/ 10-1/4 P4B0010A SMC-CR / B10P4MS151 -/4 41 L10P4FMGS 19 1 P4B0015A 7 SMC-CR ** 1-1/ 15 0 L10P4FMGS 19 1 P4B0015A 1-1/ L10P4FMGS 19 1 Wire L10P4GMGS 1-1/ 1-1/ P4B000A 1 SMC-CR L10P4GMGS 1-1/ 1-1/ P4B000A L10P4GMGS 1-1/ 1-1/ L10P4HMGS 7-1/ 16-1/ P4B000A 40 SMC-CR L10P4HMGS 7-1/ 16-1/ P4B000A L10P4HMGS 7-1/ 16-1/ L10P4JMGS 4-/4 5 P4B0050A 70 SMC-CR L10P4JMGS 4-/4 5 P4B0050A L10P4JMGS 4-/4 5 1/ B15P4MS0511-1/4 7 L15P4CMGS 1-1/4 9 P4B0005A1 19 1/ B15P4MS051-1/4 7 L15P4CMGS 1-1/4 9 P4B0005A 19 Wire / B15P4MS071 5-/4 1 L15P4DMGS 14-1/ 10 P4B0007A B15P4MS /4 5 L15P4EMGS 16-/4 11 P4B0010A 5 1-1/ B15P4MS /4 4 L15P4FMGS 0-1/4 1 P4B0015A 9 1/ B15P4MS0511-1/4 7 L15P4CMGS 1-1/4 9 P4B0005A1 19 SMC-IR / B15P4MS051-1/4 7 L15P4CMGS 1-1/4 9 P4B0005A 18 SMC-CR051 4 / B15P4MS071 5-/4 1 L15P4DMGS 14-1/ 10 P4B0007A 1 SMC-CR ** B15P4MS /4 5 L15P4EMGS 16-/4 11 P4B0010A SMC-CR / B15P4MS151 -/4 41 L15P4FMGS 0-1/4 1 P4B0015A 7 SMC-CR / 1 0 L15P4FMGS 0-1/4 1 P4B0015A Wire 1-1/ L15P4FMGS 0-1/ L15P4GMGS -1/ 15 P4B000A 1 SMC-CR L15P4GMGS -1/ 15 P4B000A L15P4GMGS -1/ L15P4HMGS 1-1/4 18 P4B000A 40 SMC-CR L15P4HMGS 1-1/4 18 P4B000A 460 L15P4HMGS 1-1/4 18 * Length and Weight are approximate. ** For 10 GPM, 15 GPM, and 0 GPM, discharge is 1-1/4" NPT. *** For 0 GPM and 50 GPM discharge is " NPT. NOTE: On HP and larger Pump, Motor, Control Box or Magnetic Starter must be ordered separately. Check Valve not included on 5 HP, 7-1/ HP and 10 HP models. Check valve not included on 50 GPM models. TrimLine version maximum outside diameter -/4". Standard version maximum outside diameter on all models is -7/8".

3 ORDERING INFORMATION Assembled Pump Pump End Motor Control Box Motor Catalog Length Wt. Catalog Length Weight Catalog Weight Catalog Weight GPM Type HP Stgs. PH Volt Number Inches* Lbs* Number Inches* Pounds* Number Pounds* Number Pounds* / B0P4MS071 -/4 0 L0P4DMGS 1-1/ 8-1/ P4B0007A Wire B0P4MS /4 4 L0P4EMGS 14-/4 9-/4 P4B0010A 5 1-1/ B0P4MS151 9 L0P4FMGS 16-/4 10-/4 P4B0015A 9 / B0P4MS071 -/4 0 L0P4DMGS 1-1/ 8-1/ P4B0007A SMC-CR B0P4MS /4 4 L0P4EMGS 14-/4 9-/4 P4B0010A 5 SMC-CR / B0P4MS / 9 L0P4FMGS 16-/4 10-/4 P4B0015A 9 SMC-CR / 9 0 L0P4FMGS 16-/4 10-/4 P4B0015A 1-1/ L0P4FMGS 16-/4 10-/ L0P4GMGS 0-1/4 1-1/ P4B000A 1 SMC-CR01 7 ** 1 0 L0P4GMGS 0-1/4 1-1/ P4B000A L0P4GMGS 0-1/4 1-1/ Wire L0P4HMGS 5-/4 15 P4B000A 40 SMC-CR L0P4HMGS 5-/4 15 P4B000A L0P4HMGS 5-/ L0P4JMGS 8 1 P4B0050A 70 SMC-CR L0P4JMGS 8 1 P4B0050A L0P4JMGS / 40 0 L0P4KMGS 5-/4 0 P4B0075A / L0P4KMGS 5-/ L0P4LMGS Wire B0P4MS / 5 L0P4EMGS 14 9-/4 P4B0010A 5 1-1/ B0P4MS / 9 L0P4FMGS 15-1/4 10-/4 P4B0015A B0P4MS / 5 L0P4EMGS P4B0010A 5 SMC-CR / B0P4MS L0P4FMGS 15-1/4 11 P4B0015A 9 SMC-CR / 6 0 L0P4FMGS 15-1/4 11 P4B0015A 1-1/ L0P4FMGS 15-1/ L0P4GMGS 18-1/4 1 P4B000A 1 SMC-CR L0P4GMGS 18-1/4 1 P4B000A 0 *** L0P4GMGS 18-1/4 1 Wire L0P4HMGS 4 15 P4B000A 40 SMC-CR L0P4HMGS 4 15 P4B000A L0P4HMGS L0P4JMGS 5-/4 0 P4B0050A 70 SMC-CR L0P4JMGS 5-/4 0 P4B0050A / 8 0 L0P4KMGS 50 7 P4B0075A / L0P4KMGS L0P4LMGS 65-1/ 5 * Length and Weight are approximate. ** For 10 GPM, 15 GPM, and 0 GPM, discharge is 1-1/4" NPT. *** For 0 GPM and 50 GPM discharge is " NPT. NOTE: On HP and larger Pump, Motor, Control Box or Magnetic Starter must be ordered separately. Check Valve not included on 5 HP, 7-1/ HP and 10 HP models. Check valve not included on 50 GPM models. TrimLine version maximum outside diameter -/4". Standard version maximum outside diameter on all models is -7/8".

4 ORDERING INFORMATION Pump End Motor Control Box Motor Catalog Length Weight Catalog Weight Catalog Weight GPM Type HP Stgs. PH Volt Number Inches* Pounds* Number Pounds* Number Pounds* Wire 1-1/ L50P4FMGS 15-1/4 10 P4B0015A 9 1-1/ L50P4FMGS 15-1/4 10 P4B0015A 7 SMC-CR / 4 0 L50P4FMGS 15-1/4 10 P4B0015A 1-1/ L50P4FMGS 15-1/ L50P4GMGS 19-1/4 1 P4B000A 1 SMC-CR L50P4GMGS 19-1/4 1 P4B000A L50P4GMGS 19-1/ *** L50P4HMGS -1/4 15 P4B000A 40 SMC-CR01 7 Wire 8 0 L50P4HMGS -1/4 15 P4B000A L50P4HMGS -1/ L50P4JMGS -1/ 0 P4B0050A 70 SMC-CR L50P4JMGS -1/ 0 P4B0050A L50P4JMGS -1/ 0 7-1/ 0 0 L50P4KMGS 47-1/ 5 P4B0075A / L50P4KMGS 47-1/ L50P4LMGS 57-/4 5 * Length and Weight are approximate. ** For 10 GPM, 15 GPM, and 0 GPM, discharge is 1-1/4" NPT. *** For 0 GPM and 50 GPM discharge is " NPT. NOTE: Pump, Motor, Control Box or Magnetic Starter must be ordered separately. Check valve not included on 50 GPM models. 4

5 OUTLINE DIMENSIONS 10, 15, 0, AND 0 GPM -7/8 OUTLINE DIMENSIONS 50 GPM -7/8 Pump End Discharge 10 GPM 1-1/4" NPT 15 GPM 1-1/4" NPT 0 GPM 1-1/4" NPT 0 GPM " NPT Pump End Discharge 50 GPM " NPT Pump diameter is -7/8". For lengths, refer to Ordering Information tables. Assembled Pump For lengths, refer to Ordering Information tables. Dimensions (in inches) are for estimating purposes only. Dimensions (in inches) are for estimating purposes only. PUMP PERFORMANCE 10 GPM CAPACITY LITERS PER MINUTE PUMP PERFORMANCE 15 GPM CAPACITY LITERS PER MINUTE HP 700 HP TOTAL HEAD IN FEET HP HP 1-1/ HP 1 HP /4 HP 1/ HP TOTAL HEAD IN METERS TOTAL HEAD IN FEET / HP 1 HP /4 HP 1/ HP HP TOTAL HEAD IN METERS CAPACITY GALLONS PER MINUTE CAPACITY GALLONS PER MINUTE 5 0 Tested and rated in accordance with Water Systems Council standards. 5

6 PUMP PERFORMANCE 0 GPM PUMP PERFORMANCE 0 GPM CAPACITY LITERS PER MINUTE HP CAPACITY LITERS PER MINUTE HP 160 TOTAL HEAD IN FEET / HP 5 HP HP 00 TOTAL HEAD IN METERS TOTAL HEAD IN FEET / HP 5 HP HP 00 TOTAL HEAD IN METERS HP 1-1/ HP 1 HP /4 HP 100 HP 1-1/ HP 1 HP CAPACITY GALLONS PER MINUTE CAPACITY GALLONS PER MINUTE 0 PUMP PERFORMANCE 50 GPM CAPACITY LITERS PER MINUTE HP / HP TOTAL HEAD IN FEET HP HP TOTAL HEAD IN METERS HP /HP CAPACITY GALLONS PER MINUTE 0 6

7 PUMP PERFORMANCE (Capacity in Gallons Per Minute) 10 GALLONS PER MINUTE Feet PSI / / / Feet PSI CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. 7

8 PUMP PERFORMANCE (Capacity in Gallons Per Minute) 15 GALLONS PER MINUTE Feet PSI / / CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards /

9 PUMP PERFORMANCE (Capacity in Gallons Per Minute) 0 GALLONS PER MINUTE Feet PSI / / Feet PSI / CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. 9

10 PUMP PERFORMANCE (Capacity in Gallons Per Minute) 0 GALLONS PER MINUTE Feet PSI / Feet PSI / CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. 10

11 PUMP PERFORMANCE (Capacity in Gallons Per Minute) 50 GALLONS PER MINUTE Feet PSI 1-1/ 5 7-1/ CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. Customer Service: BERKELEY (USA) PUMP (Canada) Pentair Water Delavan, WI 5115 USA CB565WS(/08) 11