ITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together!

Transcription

1 GS Subs, New Guardian System and You, Stronger Together! GS Submersibles have always had a reputation for being reliable and tough pumps. Now the best is even better! The new Guardian System now makes the GS Submersible pumps even tougher and longer lasting. The Guardian System includes an engineered polymer bearing which is resistant to damage from sand, abrasives and over pumping a well. It has years of field-proven reliability and durability in some of the world s toughest submersible pump applications, coalbed methane recovery wells. GS submersibles have long featured one of the most durable stages in the industry. Our floating impeller stack design, made with Noryl impellers, Lexan diffusers and stainless steel bowls has proven itself for over four decades as a best sand handling design in the industry. When it comes to submersible wells, accept no substitute, install the GS submersible with the Guardian System. For more information call (315) ext. 347 or visit ITT Engineered for Life

2 The Guardian Bearing System The New GS Discharge Head, with dual safety loops, identifies that the new Guardian Bearing System is inside. The new GS features longer thread engagement in the casing for greater strength and improved serviceability. It also provides a smooth transition at the casing lip for easy removal; the pump won t catch on well casing joints. The Guardian Bearing System features: Engineered polymer bearing material protects against wear from abrasives and over-pumped wells Enclosed, smooth bore bearing design for longer life New Dual Surface Upthrust Washer provides improved protection to the internal components during upthrust Redesigned Noryl upper bearing spider with an abrasive deflector plate for improved abrasion resistance Longer intermediate bearing spider on the larger, dual casing pumps for strength The Goulds s GS Submersible features our floating stack hydraulic design. This field proven design has over four decades of reliable, sand-handling, abrasion resistant service to its credit. Noryl impellers, Lexan diffusers and Stainless Steel bowls; a Goulds s exclusive design. ITT Water Technology, Inc. December BRGSBRG Specifications are subject to change without notice. Printed in USA. Goulds s is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. Goulds s, Guardian and the ITT Engineered Blocks Symbol are registered trademarks and tradenames of ITT Industries. Noryl and Lexan are registered trademarks of GE Plastic. ITT Engineered for Life

3 ITT Goulds s 5GS, 7GS, 1GS, 13GS, 18GS, GS 6 Hz Standard Capacity 4" Submersible s Goulds s is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. Engineered for life Features n Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without damage to the motor. n Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts. n Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 4 years as a superior sand handling, durable pump design. n FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic. n Discharge Head/Check Valve: Cast 33 stainless steel for strength and durability. Two castin safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. n Motor Adapter: Cast 33 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench. n Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant. n Hex Shaft Design: Six sided shafts for positive impeller drive. n Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl bearing spider for excellent abrasion resistance.

4 WATER END DATA Series Required H.P. Stages Water End Length (in) Wt (lbs) 5GS5R GS5R GS 5GS GS GS GS GS5R GS5R GS GS 7GS GS GS GS GS5R GS GS GS GS 1GS GS GS GS5R GS GS GS GS 13GS GS GS GS GS GS GS GS 18GS GS GS5R GS GS GS GS GS GS GS5R GS NOMENCLATURE See price book for complete order numbers. 5 GS ( C ) Specifications Flow Horse- Best Minimum Range power Efficiency Discharge Well Range Connection Size Rotation 1 5GS ½ 2 5 1¼ 4" CCW 7GS ½ 3 7 1¼ 4" CCW 1GS 3 16 ½ 5 1 1¼ 4" CCW 13GS 4 2 ½ ¼ 4" CCW 18GS 6 28 ½ ¼ 4" CCW GS ¼ 4" CCW 1 Rotation is counterclockwise when observed from pump discharge end. GS Series Materials of Construction Part Name Material Discharge Head AISI 33 SS Check Valve Poppet AISI 34 SS Check Valve Seal BUNA, FDA compliant Check Valve Seat AISI 34 SS Check Valve Retaining Ring AISI 32 SS Bearing Spider Upper Noryl GFN2 Bearing Proprietary Engineered Polymer Klipring AISI 31 SS Diffuser Lexan Impeller Noryl Bowl AISI 34 SS Intermediate Sleeve* AISI 34 SS, Powder Metal Intermediate Shaft Coupling* AISI 34 SS, Powder Metal Intermediate Bearing Spider* Glass Filled Engineered Composite Intermediate Bearing Spider* AISI 33 SS Shim AISI 34 SS Screws Cable Guard AISI 34 SS Motor Adapter AISI 33 SS Casing Shaft AISI 34 SS Coupling AISI 34 SS, Powder Metal Cable Guard AISI 34 SS Suction Screen AISI 34 SS *See repair parts for where used. AGENCY LISTINGS All factory assembled, complete pump/motor assemblies are UL778 and CSA listed. All pumps and motors comply with ANSI/NSF Motors are UL778 recognized. Canadian Standards Association at Best Efficiency 5, 7, 1, 13, 18, Blank = w/ F.E. Motor C = CentriPro Motor GS Series L = Less Control Box R = Reduced Stage 1 2 or 5 HP CL = w/centripro Motor, less Control Box Horsepower Code 5 = = = 1 15 = = 2 3 = 3 5 = 5 4 = 4" Motor Voltage 1 = 115 V 2 = 23 V 3 = 38 V 4 = 46 V 7 = 575 V Phase 1 = 1 Phase 3 Wire 2 = 1 Phase 2 Wire 3 = 3 Phase 3 Wire RL = Reduced Stage / less Control Box RCL = Reduced Stage / CentriPro Motor less Control Box u l U L CLASSIFIED EPH Underwriters Laboratories ANSI/NSF 61 - Drinking Water System Components 4P49 Goulds s is ISO 91 Registered.

5 CentriPro 4" Single-Phase Motors Order No. Type HP Volts Length (in) Weight (lb) M M wire M PSC M M M M M wire M M Franklin Electric 4" Single-Phase Motors Order No. Type HP Volts Length (in) Weight (lb) S S wire S5942 Split S6942 Phase S S S S S S794 3-wire S S S994HT S DISCHARGE 1¼" NPT Franklin Electric 4" Three-Phase Motors Order No. HP Volts Length (in) Weight (lb) S S S S S S S S S S S S S S S S S S S S S S9978HT 2 S997HT 3 23 High S9975HT 46 Thrust S9979HT S S S S S S S S W.E. MOTOR 3.9" Effective diameter with cable guard 3.75" NEMA Motor Corrosion resistant stainless steel construction. Built-in surge arrestor is provided on single phase motors through 5 HP. Stainless steel splined shaft. Hermetically sealed windings. Replaceable motor lead assembly. UL 778 recognized. NEMA mounting dimensions. Control box is required with 3 wire single phase units. Three phase units require a magnetic starter with three leg protection. Magnetic starter and heaters must be ordered separately.

6 5GS selection chart Horsepower Range ½ 2, Recommended Range , 6 Hz, 345 RPM 5GS5R ½ HP PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI

7 7GS selection chart Horsepower Range ½ 1, Recommended Range 1.5 1, 6 Hz, 345 RPM HP 7GS5R ½R 7GS15 1½ PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI Horsepower Range 1½ 3, Recommended Range 1.5 1, 6 Hz, 345 RPM HP PSI Shut-off PSI GS Shut-off PSI GS Shut-off PSI

8 1GS selection chart Horsepower Range ½ 3, Recommended Range 3 16, 6 Hz, 345 RPM HP 1GS5R ½ 1GS5R 5 PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 5, Recommended Range 3 16, 6 Hz, 345 RPM HP PSI Shut-off PSI HP 1GS5 5 PSI Shut-off PSI

9 13GS selection chart Horsepower Range ½ 3, Recommended Range 4 2, 6 Hz, 345 RPM 13GS5 ½ HP PSI Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI

10 18GS selection chart Horsepower Range ¾ 5, Recommended Range 6 28, 6 Hz, 345 RPM HP PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS5R Shut-off PSI GS Shut-off PSI

11 GS selection chart Horsepower Range 1 5, Recommended Range 8 33, 6 Hz, 345 RPM HP GS1 1 PSI Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS5R Shut-off PSI GS Shut-off PSI

12 METERS FEET GS RECOMMENDED RANGE Ft. RPM Hz GS1 model 5GS TOTAL DYNAMIC HEAD GS1 GS GS GSR m /hr CAPACITY METERS 36 FEET 12 7GS3 RECOMMENDED RANGE RPM Hz GS2.5 2 Ft. TOTAL DYNAMIC HEAD GS GS1 model 7GS GS GS GS5R CAPACITY METERS 4 35 FEET 1GS5 12 1GS5R 11 m 3 /hr 13 RECOMMENDED RANGE Ft. RPM Hz 3 1 model 1GS TOTAL DYNAMIC HEAD GS GS2 6 1GS GS GS7 3 1GS5 2 1GS5R CAPACITY 1 m /hr

13 METERS 22 2 FEET 7 1GS RECOMMENDED RANGE 4 2 RPM Hz Ft. model 13GS TOTAL DYNAMIC HEAD GS 5 4 1GS1 3 1GS GS 4 2 1GS METERS 32 3 FEET 1 RECOMMENDED RANGE 6 28 RPM Hz CAPACITY 5 m /hr GS5 1 2 Ft. TOTAL DYNAMIC HEAD GS5R 6 18GS3 5 18GS2 4 model 18GS GS15 18GS1 18GS m 3 /h CAPACITY METERS 2 2 FEET 8 7 GS5 GS5R RECOMMENDED RANGE 8 33 RPM Hz Ft. model GS TOTAL DYNAMIC HEAD GS3 GS GS GS m /h 11 CAPACITY

14 ITT Goulds s 33GS, 4GS, 55GS, 6GS, 75GS, 8GS 6 Hz High Capacity 4" Submersible s Goulds s is a brand of ITT Residential and Commercial Water. Engineered for life Features n Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without damage to the motor. n Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts. n Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 4 years as a superior sand handling, durable pump design. n FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic. n Discharge Head/Check Valve: Cast 33 stainless steel for strength and durability. Two castin safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. n Motor Adapter: Cast 33 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench. n Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant. n Hex Shaft Design: Six sided shafts for positive impeller drive. n Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The upper bearing is mounted in a durable engineered composite bearing spider for excellent abrasion resistance.

15 WATER END DATA Series Required H.P. Stages Water End Length (in) Wt (lbs) 33GS GS GS GS 33GS GS GS GS GS GS GS 4GS GS GS GS GS GS 55GS GS GS GS GS GS GS 6GS GS GS GS GS 75GS GS GS GS GS 8GS GS Specifications Flow Horse- Best Discharge Minimum Range power Efficiency Well Range Connection Size Rotation 1 33GS CCW 4GS ½ 7½ CCW 55GS 2 8 1½ CCW 6GS 4 8 1½ 7½ CCW 75GS CCW 8GS ½ CCW 1 Rotation is counterclockwise when observed from pump discharge end. GS Series Materials of Construction Part Name Material Discharge Head AISI 33 SS Check Valve Poppet AISI 34 SS Check Valve Seal BUNA, FDA compliant Check Valve Seat AISI 34 SS Check Valve Retaining Ring AISI 32 SS Bearing Spider Upper Glass Filled Engineered Composite Bearing Proprietary Engineered Polymer Klipring AISI 31 SS Diffuser Lexan Impeller Noryl Bowl AISI 34 SS Intermediate Sleeve* AISI 34 SS, Powder Metal Intermediate Shaft Coupling* AISI 34 SS, Powder Metal Intermediate Bearing Spider* Glass Filled Engineered Composite Intermediate Bearing Spider* AISI 33 SS Shim AISI 34 SS Screws Cable Guard AISI 34 SS Motor Adapter AISI 33 SS Casing Shaft AISI 34 SS Coupling AISI 34 SS, Powder Metal Cable Guard AISI 34 SS Suction Screen AISI 34 SS *See repair parts for where used. NOMENCLATURE at Best Efficiency 33, 4, 55, 6, 75, 8 GS Series Horsepower Code 15 = = 2 3 = 3 5 = 5 75 = = 1 4 = 4" Motor See price book for complete order numbers. 33 GS ( C ) Voltage 1 = 115 V 2 = 23 V 3 = 38 V 4 = 46 V 7 = 575 V Phase 1 = 1 Phase 3 Wire 2 = 1 Phase 2 Wire 3 = 3 Phase 3 Wire Blank = w/ F.E. Motor C = CentriPro Motor AGENCY LISTINGS All factory assembled, complete pump/motor assemblies are UL778 and CSA listed. All pumps and motors comply with ANSI/NSF Motors are UL778 recognized. u l u l CLASSIFIED EPH Canadian Standards Association Underwriters Laboratories ANSI/NSF 61 - Drinking Water System Components 4P49 Goulds s is ISO 91 Registered.

16 CentriPro 4" Single-Phase Motors Order No. Type HP Volts Length (in) Weight (lb) M Wire M15422 PSC M Wire M Franklin Electric 4" Single-Phase Motors Order No. Type HP Volts Length (in) Weight (lb) S Wire S7942 SP S S S Wire S S994HT S DISCHARGE 1¼" NPT Franklin Electric 4" Three-Phase Motors Order No. HP Volts Length (in) Weight (lb) S S S S S S S S S S S S S S S S9978HT 2 S997HT 3 23 High S9975HT 46 Thrust S9979HT S S S S S S S S W.E. MOTOR 3.9" Effective diameter with cable guard 3.75" NEMA Motor Corrosion resistant stainless steel construction. Built-in surge arrestor is provided on single phase motors through 5 HP. Stainless steel splined shaft. Hermetically sealed windings. Replaceable motor lead assembly. UL 778 recognized. NEMA mounting dimensions. Control box is required with 3 wire single phase units. Three phase units require a magnetic starter with three leg protection. Magnetic starter and heaters must be ordered separately.

17 33GS selection chart Horsepower Range 1 3, Recommended Range 1 5, 6 Hz, 345 RPM 33GS1 1 HP PSI Shut-off PSI GS ½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 5-1, Recommended Range 1 5, 6 Hz, 345 RPM 33GS5 5 HP PSI Shut-off PSI GS75 7½ Shut-off PSI GS Shut-off PSI

18 4GS selection chart Horsepower Range 1½ 7½, Recommended Range 2 65, 6 Hz, 345 RPM 4GS15 1½ HP PSI Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI

19 55GS selection chart Horsepower Range 1½ 5, Recommended Range 2 8, 6 Hz, 345 RPM 55GS15 HP PSI ½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 7½ 1, Recommended Range 2 8, 6 Hz, 345 RPM 55GS75 HP PSI ½ Shut-off PSI GS Shut-off PSI

20 6GS selection chart Horsepower Range 1½ 7½, Recommended Range 4 8, 6 Hz, 345 RPM 6GS15 1½ HP PSI Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI

21 75GS selection chart Horsepower Range 3 1, Recommended Range 4 1, 6 Hz, 345 RPM HP PSI GS Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI GS Shut-off PSI

22 8GS selection chart Horsepower Range 3 7½, Recommended Range 5 12, 6 Hz, 345 RPM 8GS3 3 HP PSI Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI

23 METERS FEET 14 GS GS 1 RECOMMENDED RANGE Ft. 2 MODEL 33GS SIZE COMPOSITE RPM 345 model 33GS TOTAL DYNAMIC HEAD GS GS % EFF GS GS1 GS METERS 22 2 FEET 8 7 GS 6 RECOMMENDED RANGE Ft. MODEL 4GS SIZE COMPOSITE RPM m /hr CAPACITY TOTAL DYNAMIC HEAD GS GS GS GS % EFF model 4GS CAPACITY m /hr model 55GS METERS TOTAL DYNAMIC HEAD FEET GS1 GS GS 3 GS 2 1 GS GS1 RECOMMENDED RANGE Ft. MODEL 55GS SIZE COMPOSITE RPM 345 % EFF CAPACITY 15 2 m /hr

24 METERS FEET GS RECOMMENDED RANGE 4 8 Ft. MODEL 6GS SIZE COMPOSITE RPM 345 model 6GS TOTAL DYNAMIC HEAD GS 2 GS 1 GS GS % EFF METERS FEET 6 GS1 RECOMMENDED RANGE 4 1 Ft. MODEL 75GS SIZE COMPOSITE RPM CAPACITY m /hr 15 5 GS TOTAL DYNAMIC HEAD GS GS % EFF model 75GS m /h CAPACITY METERS FEET 7 MODEL 8GS SIZE COMPOSITE RPM Ft RECOMMENDED RANGE 5 12 model 8GS TOTAL DYNAMIC HEAD GS 4 3 GS % EFF GS CAPACITY m /hr

25 ITT Goulds s and the ITT Engineered Blocks Symbol are registered trademarks and tradenames of ITT Corporation. Noryl and Lexan is a registered trademark of GE Plastic. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. B33-8GS July, ITT Corporation Engineered for life