5GS, 7GS, 10GS, 13GS, 18GS & 25GS 5-25 GPM, ½ 5 HP, 60 HZ, SUBMERSIBLE PUMPS

Transcription

1 TECHNICAL BROCHURE B5-25GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without damage to the motor. Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts. Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 4 years as a superior sand handling, durable pump design. FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic. Discharge Head/Check Valve: Cast 33 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. Motor Adapter: Cast 33 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench. Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant. Hex Shaft Design: Six sided shafts for positive impeller drive. Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl bearing spider for excellent abrasion resistance. 5GS, 7GS, 1GS, 13GS, 18GS & 25GS 5-25, ½ 5 HP, 6 HZ, SUBMERSIBLE PUMPS

2 WATER END DATA Series Required Water End Stages H.P. Length (in) Wt (lbs) 5GS5R GS GS 5GS GS GS GS GS5R GS GS GS 7GS GS GS GS GS5R GS GS GS GS 1GS GS GS GS5R GS GS GS GS 13GS GS GS GS GS GS GS GS 18GS GS GS5R GS GS GS GS 25GS GS GS5R GS SPECIFICATIONS Flow Horse- Best Discharge Minimum Range power Efficiency Well Rotation 1 Range Connection Size 5GS ½ 2 5 1¼ 4" CCW 7GS ½ 3 7 1¼ 4" CCW 1GS 3 16 ½ 5 1 1¼ 4" CCW 13GS 4 2 ½ ¼ 4" CCW 18GS 6 28 ¾ ¼ 4" CCW 25GS ¼ 4" CCW 1 Rotation is counterclockwise when observed from pump discharge end. GS SERIES MATERIALS OF CONSTRUCTION Part Name Material Discharge Head AISI 33 SS Check Valve Poppet AISI 34 SS Check Valve Seal BUNA, FDA compliant Check Valve Seat AISI 34 SS Check Valve Retaining Ring AISI 32 SS Bearing Spider Upper Noryl GFN2 Bearing Proprietary Engineered Polymer Klipring AISI 31 SS Diffuser Lexan Impeller Noryl Bowl AISI 34 SS Intermediate Sleeve* AISI 34 SS, Powder Metal Intermediate Shaft Coupling* AISI 34 SS, Powder Metal Intermediate Bearing Spider* Glass Filled Engineered Composite Intermediate Bearing Spider* AISI 33 SS Shim AISI 34 SS Screws Cable Guard AISI 34 SS Motor Adapter AISI 33 SS Casing Shaft AISI 34 SS Coupling AISI 34 SS, Powder Metal Cable Guard AISI 34 SS Suction Screen AISI 34 SS *See repair parts for where used. DISCHARGE 1¼" NPT NOMENCLATURE at Best Efficiency 5, 7, 1, 13, 18, 25 GS Series Horsepower Code 5 = 1 /2 7 = 3 /4 1 = 1 15 = 1 1 /2 2 = 2 3 = 3 5 = 5 4 = 4" Motor See price book for complete order numbers. 5 GS C Voltage 1 = 115 V 2 = 23 V 3 = 38 V 4 = 46 V 7 = 575 V Phase 1 = 1 Phase 3 Wire 2 = 1 Phase 2 Wire 3 = 3 Phase 3 Wire C = CentriPro Motor CL = w/centripro Motor, less Control Box RCL = Reduced Stage / CentriPro Motor less Control Box W.E. MOTOR 3.9" Effective diameter with cable guard 3.75" PAGE 2

3 CENTRIPRO 4" SINGLE-PHASE MOTORS CENTRIPRO 4" THREE-PHASE MOTORS Order No. Type HP Volts Length Weight in. (mm) lb. (kg.) M5421 ½ (279) 2 (9.1) M5422 ½ 11. (279) 2 (9.1) 2-wire M7422 ¾ 12.4 (314) 23 (1.4) PSC 23 M (337) 25 (11.3) M (378) 29 (13.2) M5411 ½ (253) 19 (8.6) M5412 ½ (246) 18 (8.2) M7412 ¾ (275) 22 (1) M (297) 23 (1.4) 3-wire M (345) 28 (12.7) M (383) 31 (14.1) M (466) 4 (18.1) M (73) 7 (31.8) NEMA MOTOR Corrosion resistant stainless steel construction. Built-in surge arrestor is provided on single phase motors through 5 HP. Stainless steel splined shaft. Hermetically sealed windings. Replaceable motor lead assembly. NEMA mounting dimensions. Control box is required with 3 wire single phase units. Three phase units require a magnetic starter with three leg Class 1 overload protection. Order No. by Voltage Length Weight 2V 23V 46V HP In. (mm) Lb. (Kg.) M543 M5432 M5434 ½ 1.8 (275) 22 (9.7) M743 M7432 M7434 ¾ 1.8 (275) 22 (9.7) M143 M1432 M (297) 23 (1.4) M1543 M15432 M (297) 23 (1.4) M243 M2432 M (351) 28 (12.7) M343 M3432 M (389) 32 (14.5) M543 M5432 M (55) 55 (24.9) M7543 M75432 M (73) 7 (1.8) AGENCY LISTINGS C C U L U L CLASSIFIED US US WATER QUALITY U L CLASSIFIED WATER QUALITY LLC / Water End and Complete - tested to UL778 and CAN 22.2 by UL (Underwriters Laboratories Inc.) CentriPro Motor - tested to UL778 and CAN 22.2 by CSA International (Canadian Standards Association) /Water End - Certified to NSF/ANSI 61 Drinking Water System Components 4P49 CentriPro Motor - Certified to NSF/ANSI 61, Annex G, Drinking Water System Components 4P49 NSF/ANSI 372 Drinking Water System Components Lead Content CLASS Low Lead Content Certification Program - - Plumbing Products METERS FEET GS2 RECOMMENDED RANGE Ft. RPM Hz 5GS TOTAL DYNAMIC HEAD GS15 5GS1 5GS7 5GS5 5GS5R m 3 /hr CAPACITY PAGE 3

4 METERS 36 FEET 12 7GS3 RECOMMENDED RANGE RPM Hz 7GS GS2.5 2 Ft. TOTAL DYNAMIC HEAD GS15 7GS GS GS GS5R METERS FEET CAPACITY 1GS5 13 RECOMMENDED RANGE GS5R.5 25 Ft. RPM Hz m 3 /hr 1GS TOTAL DYNAMIC HEAD GS GS2 6 1GS GS1 1GS7 3 1GS5 2 1GS5R PAGE CAPACITY m 3 /hr

5 MODEL 5GS SELECTION CHART Horsepower Range ½ 2, Recommended Range , 6 Hz, 345 RPM 5GS5R ½ HP PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI PAGE 5

6 MODEL 7GS SELECTION CHART Horsepower Range ½ 1, Recommended Range 1.5 1, 6 Hz, 345 RPM HP 7GS5R ½ 7GS15 1½ PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI Horsepower Range 1½ 3, Recommended Range 1.5 1, 6 Hz, 345 RPM HP PSI Shut-off PSI GS Shut-off PSI GS Shut-off PSI PAGE 6

7 MODEL 1GS SELECTION CHART Horsepower Range ½ 3, Recommended Range 3 16, 6 Hz, 345 RPM HP 1GS5R ½ 1GS5R 5 PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 5, Recommended Range 3 16, 6 Hz, 345 RPM HP PSI Shut-off PSI HP 1GS5 5 PSI Shut-off PSI PAGE 7

8 METERS 22 2 FEET 7 13GS3 RECOMMENDED RANGE 4 2 RPM Hz 13GS Ft. TOTAL DYNAMIC HEAD GS2 13GS15 13GS GS GS METERS 32 3 FEET RECOMMENDED RANGE 6 28 CAPACITY 5 RPM Hz m 3 /hr 18GS GS5 1 2 Ft. TOTAL DYNAMIC HEAD GS5R 6 18GS3 5 18GS GS15 18GS1 18GS m 3 /h PAGE 8 CAPACITY

9 MODEL 13GS SELECTION CHART Horsepower Range ½ 3, Recommended Range 4 2, 6 Hz, 345 RPM 13GS5 ½ HP PSI Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI PAGE 9

10 MODEL 18GS SELECTION CHART Horsepower Range ¾ 5, Recommended Range 6 28, 6 Hz, 345 RPM HP PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS5R Shut-off PSI GS Shut-off PSI PAGE 1

11 MODEL 25GS SELECTION CHART Horsepower Range 1 5, Recommended Range 8 33, 6 Hz, 345 RPM 25GS1 1 HP PSI Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS5R Shut-off PSI GS Shut-off PSI PAGE 11

12 METERS FEET GS5 25GS5R RECOMMENDED RANGE 8 33 RPM Hz 25GS Ft. TOTAL DYNAMIC HEAD GS3 25GS GS GS m 3 /h CAPACITY Xylem, Inc East Bayard Street Ext., Suite A Seneca Falls, NY Phone: (866) Fax: (888) Goulds is a registered trademark of Goulds s, Inc. and is used under license. CentriPro is a trademark of Xylem Inc. or one of its subsidiaries. Noryl and Lexan are trademarks of GE Plastic. 212 Xylem Inc. B5-25GS March 212