ITT. Goulds Pumps 5GS, 7GS, 10GS, 13GS, 18GS & 25GS. Engineered for life B5-25GS. Residential Water Systems FEATURES

Transcription

1 B5-25GS ITT Goulds s 5GS, 7GS, 1GS, 13GS, 18GS & 25GS 5-25, ½ 5, 6 Hz, Submersible s Goulds s is a brand of ITT Corporation. Engineered for life FEATURES n Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without damage to the motor. n Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts. n Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 4 years as a superior sand handling, durable pump design. n FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic. n Discharge Head/Check Valve: Cast 33 stainless steel for strength and durability. Two castin safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. n Motor Adapter: Cast 33 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench. n Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant. n Hex Shaft Design: Six sided shafts for positive impeller drive. n Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl bearing spider for excellent abrasion resistance.

2 WATER END DATA Series Required H.P. Stages Water End Length (in) Wt (lbs) 5GS5R GS GS 5GS GS GS GS GS5R GS GS GS 7GS GS GS GS GS5R GS GS GS GS 1GS GS GS GS5R GS GS GS GS 13GS GS GS GS GS GS GS GS 18GS GS GS5R GS GS GS GS 25GS GS GS5R GS SPECIFICATIONS Residential Water MinimumSystems Flow Horse- Best Range power Efficiency Discharge Well Range Connection Size Rotation 1 5GS ½ 2 5 1¼ 4" CCW 7GS ½ 3 7 1¼ 4" CCW 1GS 3 16 ½ 5 1 1¼ 4" CCW 13GS 4 2 ½ ¼ 4" CCW 18GS 6 28 ¾ ¼ 4" CCW 25GS ¼ 4" CCW 1 Rotation is counterclockwise when observed from pump discharge end. GS SERIES MATERIALS OF CONSTRUCTION Part Name Material Discharge Head AISI 33 SS Check Valve Poppet AISI 34 SS Check Valve Seal BUNA, FDA compliant Check Valve Seat AISI 34 SS Check Valve Retaining Ring AISI 32 SS Bearing Spider Upper Noryl GFN2 Bearing Proprietary Engineered Polymer Klipring AISI 31 SS Diffuser Lexan Impeller Noryl Bowl AISI 34 SS Intermediate Sleeve* AISI 34 SS, Powder Metal Intermediate Shaft Coupling* AISI 34 SS, Powder Metal Intermediate Bearing Spider* Glass Filled Engineered Composite Intermediate Bearing Spider* AISI 33 SS Shim AISI 34 SS Screws Cable Guard AISI 34 SS Motor Adapter AISI 33 SS Casing Shaft AISI 34 SS Coupling AISI 34 SS, Powder Metal Cable Guard AISI 34 SS Suction Screen AISI 34 SS *See repair parts for where used. DISCHARGE 1¼" NPT NOMENCLATURE See price book for complete order numbers. at Best Efficiency Horsepower Code 5 = 1 /2 7 = 3 /4 1 = 1 15 = 1 1 /2 2 = 2 3 = 3 5 = 5 4 = 4" Motor 5 GS ( C ) 5, 7, 1, 13, 18, 25 Blank = w/ F.E. Motor C = CentriPro Motor GS Series L = Less Control Box R = Reduced Stage 1 2 or 5 CL = w/centripro Motor, less Control Box Voltage 1 = 115 V 2 = 23 V 3 = 38 V 4 = 46 V 7 = 575 V Phase 1 = 1 Phase 3 Wire 2 = 1 Phase 2 Wire 3 = 3 Phase 3 Wire RL = Reduced Stage / less Control Box RCL = Reduced Stage / CentriPro Motor less Control Box W.E. 3.9" Effective diameter with cable guard 3.75" MOTOR 2

3 CENTRIPRO 4" SINGLE-PHASE MOTORS Order No. Type Volts Length Weight in. (mm) lb. (kg.) M5421 ½ (279) 2 (9.1) M5422 ½ 11. (279) 2 (9.1) 2-wire M7422 ¾ 12.4 (314) 23 (1.4) PSC 23 M (337) 25 (11.3) M (378) 29 (13.2) M5411 ½ (253) 19 (8.6) M5412 ½ (246) 18 (8.2) M7412 ¾ (275) 22 (1) M (297) 23 (1.4) 3-wire M (345) 28 (12.7) M (383) 31 (14.1) M (466) 4 (18.1) M (73) 7 (31.8) CENTRIPRO 4" THREE-PHASE MOTORS Order No. by Voltage Length Weight 2V 23V 46V In. (mm) Lb. (Kg.) M543 M5432 M5434 ½ 1.8 (275) 22 (9.7) M743 M7432 M7434 ¾ 1.8 (275) 22 (9.7) M143 M1432 M (297) 23 (1.4) M1543 M15432 M (297) 23 (1.4) M243 M2432 M (351) 28 (12.7) M343 M3432 M (389) 32 (14.5) M543 M5432 M (55) 55 (24.9) M7543 M75432 M (73) 7 (1.8) NEMA MOTOR Corrosion resistant stainless steel construction. Built-in surge arrestor is provided on single phase motors through 5. Stainless steel splined shaft. Hermetically sealed windings. Replaceable motor lead assembly. CSA certified. UL 778 recognized. NEMA mounting dimensions. Control box is required with 3 wire single phase units. Three phase units require a magnetic starter with three leg Class 1 overload protection. METERS FEET GS2 RECOMMENDED RANGE AGENCY LISTINGS All factory assembled, complete pump/motor assemblies are UL778 and CSA listed. All pumps and motors comply with ANSI/NSF Motors are UL778 recognized. U L U L CLASSIFIED WATER QUALITY Canadian Standards Association Underwriters Laboratories ANSI/NSF 61 - Drinking Water System Components 4P49 Goulds s is ISO 91 Registered Ft. RPM Hz 5GS TOTAL DYNAMIC HEAD GS15 5GS1 5GS7 5GS5 5GS5R CAPACITY 3 m 3 /hr

4 METERS 36 FEET 12 7GS3 RECOMMENDED RANGE RPM 345 GOULDS PUMPS 7GS 6 Hz GS2.5 2 Ft. TOTAL DYNAMIC HEAD GS15 7GS GS GS GS5R CAPACITY m 3 /hr METERS 4 FEET 1GS5 13 RECOMMENDED RANGE 3 16 RPM Hz 1GS GS5R.5 25 Ft. 3 1 TOTAL DYNAMIC HEAD GS GS2 6 1GS GS1 1GS7 3 1GS5 2 1GS5R CAPACITY m 3 /hr 4

5 5GS SELECTION CHART Horsepower Range ½ 2, Recommended Range , 6 Hz, 345 RPM 5GS5R ½ PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI

6 7GS SELECTION CHART Horsepower Range ½ 1, Recommended Range 1.5 1, 6 Hz, 345 RPM 7GS5R ½ 7GS15 1½ PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI Horsepower Range 1½ 3, Recommended Range 1.5 1, 6 Hz, 345 RPM PSI Shut-off PSI GS Shut-off PSI GS Shut-off PSI

7 1GS SELECTION CHART Horsepower Range ½ 3, Recommended Range 3 16, 6 Hz, 345 RPM 1GS5R ½ 1GS5R 5 PSI Shut-off PSI GS5 ½ Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 5, Recommended Range 3 16, 6 Hz, 345 RPM PSI Shut-off PSI GS5 5 PSI Shut-off PSI

8 METERS 22 2 FEET 7 13GS3 RECOMMENDED RANGE 4 2 RPM GOULDS 345 PUMPS 13GS 6 Hz Ft. TOTAL DYNAMIC HEAD GS2 13GS15 13GS GS GS CAPACITY 5 m 3 /hr METERS 32 3 FEET 1 RECOMMENDED RANGE 6 28 RPM Hz 18GS GS5 1 2 Ft. TOTAL DYNAMIC HEAD GS5R 6 18GS3 5 18GS GS15 18GS1 18GS m 3 /h CAPACITY 8

9 13GS SELECTION CHART Horsepower Range ½ 3, Recommended Range 4 2, 6 Hz, 345 RPM 13GS5 ½ PSI Shut-off PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI

10 18GS SELECTION CHART Horsepower Range ¾ 5, Recommended Range 6 28, 6 Hz, 345 RPM PSI GS7 ¾ Shut-off PSI GS Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS5R Shut-off PSI GS Shut-off PSI

11 25GS SELECTION CHART Horsepower Range 1 5, Recommended Range 8 33, 6 Hz, 345 RPM 25GS1 1 PSI Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS5R Shut-off PSI GS Shut-off PSI

12 25GS METERS FEET GS5 25GS5R RECOMMENDED RANGE 8 33 RPM Hz Ft. TOTAL DYNAMIC HEAD GS3 25GS GS GS m 3 /h CAPACITY ITT 2881 East Bayard Street, Seneca Falls, NY Phone: (315) Fax: (315) Goulds s is a registered trademark of ITT Corporation. ITT, the Engineered Blocks Symbol and Engineered for Life are registered trademarks of ITT Manufacturing Enterprises, Inc. Copyright 21 ITT Corporation B5-25GS June, 21 Printed in U.S.A. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ITT Engineered for life