HP Volts Stages Discharge Head Length Brand S10P4HS /2 6 S10P4HS / " Sta-Rite S10P4HS Stainless Steel

Size: px

Start display at page:

Download "HP Volts Stages Discharge Head Length Brand S10P4HS /2 6 S10P4HS / " Sta-Rite S10P4HS Stainless Steel"

Marilynn Andrews
5 years ago
Views:

28/03/14 E48 4" (Sta-Rite) For well & lake applications in residential, industrial, commercial, multiple housing & farm use Draw down to 13-1/2" from bottom of well Corrosion resistant intake,

1 28/03/14 E48 4" (Sta-Rite) For well & lake applications in residential, industrial, commercial, multiple housing & farm use Draw down to 13-1/2" from bottom of well Corrosion resistant intake, hardware and cable guard SignaSeal staging system incorporates a harder-than-sand ceramic wear surface Floating impeller design resists sand and reduce sand locking PENTEK XE Motor, single phase Body 1 Year Limited Warranty Drinking Water NSF/ANSI 61 Constant Pressure Pump Package HP Volts Stages Discharge Head Length Brand 2 Wire Part 3 Wire Part 10 GPM 1/2 7 S10P4HS /2 6 S10P4HS /2 6 22" Sta-Rite S10P4HS / /4" NPT 25" Sta-Rite S10P4HS /2 6 22" Sta-Rite - S10P4HS /4 8 25" Sta-Rite - S10P4HS " Sta-Rite - S10P4HS / /4" Sta-Rite - S10P4HS GPM 3/ /4" NPT 25 3/4" Sta-Rite - S15P4HS /4" Sta-Rite - S15P4HS GPM /4" NPT 27 1/4" Sta-Rite - S20P4HS / /2" Sta-Rite - S20P4HS GPM 1 1/2 6 2" NPT 29" Sta-Rite - S30P4HS15231 Pump Package for drip tank, cistern, reservoir and well applications Application Typical Application: Designed for rural low pressure water distribution systems Part PIDPACK Not all package contents are pictured Storage tank not included. 200, 300 & 600 gallon poly tanks available. See "Water Storage Tanks" in section F for more information. Call Davies, we can size a package for each specific application!

16/10/15 E48-1 4" (JClass) For well & lake applications in residential, industrial, commercial, multiple housing & farm use Stainless steel body, draw down to 13-1/2" from bottom of well, designed to

2 16/10/15 E48-1 4" (JClass) For well & lake applications in residential, industrial, commercial, multiple housing & farm use Stainless steel body, draw down to 13-1/2" from bottom of well, designed to resist sand and reduce sand locking TRI-SEAL Floating Stage System Further improves efficiency and protects against wear when pumping abrasives (sand): - Floating impeller hub seal provides a radial seal to prevent fluid recirculation around the impeller hub - Phenolic washer provides axial sealing and high performance even in severe conditions - Stainless steel impeller eye seal Warranty: Unconditionally guaranteed against sand locking in abrasive well conditions for 5 full years Drinking Water NSF/ANSI 61 (Pump End Only) HP Volts Stages Discharge Head Brand 2 Wire Part 3 Wire Part 5 GPM 1/2 J-Class (5JS05P4-2W115) (5JS05P4-3W115) 115 J-Class (5JS05S4-2W115) (5JS05S4-3W115) 8 J-Class (5JS05P4-2W) (5JS05P4-3W) J-Class (5JS05S4-2W) (5JS05S4-3W) 3/4 12 J-Class (5JS07P4-2W) (5JS07P4-3W) J-Class (5JS07S4-2W) J-Class (5JS1P4-2W) (5JS1P4-3W) J-Class (5JS1S4-2W) (5JS1S4-3W) GPM J-Class (5JS15P4-2W) (5JS15P4-3W) J-Class (5JS15S4-2W) (5JS15S4-3W) 1/2 J-Class (7JS05P4-2W115) (7JS05P4-3W115) 115 J-Class (7JS05S4-2W115) (7JS05S4-3W115) 7 J-Class (7JS05P4-2W) (7JS05P4-3W) J-Class (7JS05S4-2W) (7JS05S4-3W) 3/4 10 J-Class (7JS07P4-2W) (7JS07P4-3W) J-Class (7JS07S4-2W) (7JS07S4-3W) 1 13 J-Class (7JS1P4-2W) (7JS1P4-3W) J-Class (7JS1S4-2W) (7JS1S4-3W) GPM J-Class (7JS15P4-2W) (7JS15P4-3W) J-Class (7JS15S4-2W) (7JS15S4-3W) 1/2 J-Class (10JS05P4-2W115) (10JS05P4-3W115) 115 J-Class (10JS05S4-2W115) (10JS05S4-3W115) 6 J-Class (10JS05P4-2W) (10JS05P4-3W) J-Class (10JS05S4-2W) (10JS05S4-3W) 3/4 8 J-Class (10JS07P4-2W) (10JS07P4-3W) J-Class (10JS07S4-2W) (10JS07S4-3W) 1 11 J-Class (10JS1P4-2W) (10JS1P4-3W) J-Class (10JS1S4-2W) (10JS1S4-3W) GPM J-Class (10JS15P4-2W) (10JS15P4-3W) J-Class (10JS15S4-2W) (10JS15S4-3W) 3/4 6 J-Class (15JS07S4-3W) 20 GPM J-Class (20JS15S4-3W)

06/12/13 E48-1A Constant Pressure Pump Package Pump Packages for drip tank, cistern, reservoir and well applications Application Typical Application: Designed for rural low pressure water

3 06/12/13 E48-1A Constant Pressure Pump Package Pump Packages for drip tank, cistern, reservoir and well applications Application Typical Application: Designed for rural low pressure water distribution systems Part MONOPACK2 Storage tank not included. 200, 300 & 600 gallon poly tanks available. See "Water Storage Tanks" in section F for more information. Call Davies, we can size a package for each specific application! Not all package contents are pictured

29/04/11 E48-2 4" Multi-Stage (Sta-Rite) - STEP Plus D Series Wide variety of residential, commercial and agriculture applications: - Cistern & Holding Tanks - Wells - Grey Water No solids handling

4 29/04/11 E48-2 4" Multi-Stage (Sta-Rite) - STEP Plus D Series Wide variety of residential, commercial and agriculture applications: - Cistern & Holding Tanks - Wells - Grey Water No solids handling capabilities Superior draw-down capability: Draw down to 4-1/2" from bottom of tank Reduced Amp draw Body Impellers: Acetel Intake: Fiberglass reinforced thermoplastic Intake Screen: Cool & quiet operation Discharge Outlet: 1 1/4" NPT threaded 10' cord 1 Year Limited Warranty HP Volts Wire Max Load Amps Phase Discharge Head Brand Part 10 GPM 1/ Sta-Rite 10D0M / Sta-Rite 10D0M GPM 1/ Sta-Rite 20D0M / Sta-Rite 20D0M GPM 1/ Sta-Rite 30D0M GPM 1/ Sta-Rite 30D0M05221

05/11/07 E49 4" Submersible Motors These single & three phase submersible motors are a reliable, efficient & trouble free means of powering single & three phase pumps Built-in lightning protection

5 05/11/07 E49 4" Submersible Motors These single & three phase submersible motors are a reliable, efficient & trouble free means of powering single & three phase pumps Built-in lightning protection Two wire motors have an integral starting component Single phase, three wire motors require the use of above ground control boxes with the same HP & voltage HP Volts / Hz Thrust (lbs.) Brand Part Single Phase 2 Wire Motors with Leads 1/2 115 / Franklin Electric Single Phase 3 Wire Motors with Leads 1/2 115 / Franklin Electric /2 / Franklin Electric /4 / Franklin Electric / Franklin Electric /2 / Franklin Electric / Franklin Electric / Franklin Electric Phase 3 Wire Motors with Leads 1 1/2 / Franklin Electric / Franklin Electric / Franklin Electric / Franklin Electric Replacement Leads Fits 2 & 3 wire motors Length Brand Part 2 Wire 48" Franklin Electric Wire 48" Franklin Electric " Franklin Electric

02/05/08 E50 HP 4" Submersible Pump Ends Stages Discharge Head Part 18 GPM 1 1/2 14 9249-2321 (15S41814PV) 25 GPM 1 1/2 10 9249-1034 (15S42510PV) 2 12 9247-1093 (2S42512XMV) 3 17 9247-1101

6 02/05/08 E50 HP 4" Submersible Pump Ends Stages Discharge Head Part 18 GPM 1 1/ (15S41814PV) 25 GPM 1 1/ (15S42510PV) (2S42512XMV) (3S42517XMV) 4" Submersible Pump Ends with TRI-SEAL Floating Stage System HP Stages 1/2 8 3/ Discharge Head 5 GPM Part (5JS05P4-PE) (5JS05S4-PE) (5JS07P4-PE) (5JS07S4-PE) (5JS1P4-PE) (5JS1S4-PE) (5JS15P4-PE) (5JS15S4-PE) (5JS2S4-PE) 7 GPM 1/2 7 3/ (7JS05P4-PE) (7JS05S4-PE) (7JS07P4-PE) (7JS07S4-PE) (7JS1P4-PE) (7JS1S4-PE) (7JS15P4-PE) (7JS15S4-PE) (7JS2S4-PE) (7JS3S4-PE) 10 GPM 1/2 6 3/ (10JS05P4-PE) (10JS05S4-PE) (10JS07P4-PE) (10JS07S4-PE) (10JS1P4-PE) (10JS1S4-PE) (10JS15P4-PE) (10JS15S4-PE) (10JS2S4-PE) (10JS3S4-PE) (10JS5S4-PE)

27/06/08 E51 Submersible Pump Accessories Control Boxes Solid state controls for single phase, 3 wire submersible motors NEMA 3R, IP23 Enclosure is suitable for outdoor mounting Quick Disconnect

7 27/06/08 E51 Submersible Pump Accessories Control Boxes Solid state controls for single phase, 3 wire submersible motors NEMA 3R, IP23 Enclosure is suitable for outdoor mounting Quick Disconnect Control Boxes - For motors through 1 HP Standard Control Boxes - For motors from 1 1/2 through 5 HP - Recommended for water systems that use standard/heavy duty pressure switches, level switches or other pilot devices - External access to overload resets (110 models only) - Model does not come with overload protection. If installed on a motor with a date code prior to 06H, overload kit # must be added first. HP KW Volts / Hz Terminals Max Wire Brand Part Quick Disconnect Boxes (QD) - Accepts the Pumptech Quick Disconnect 1/ / 60 5 AWG 10 Franklin Electric / / 60 5 AWG 10 Franklin Electric /2.37 / 60 5 AWG 10 Franklin Electric /4.55 / 60 5 AWG 10 Franklin Electric / 60 5 AWG 10 Franklin Electric Standard Boxes - Capacitor Start / Capacitor Run 1 1/2 1.1 / 60 6 AWG 2 Franklin Electric Overload Kit for # installed on a motor with a date code prior to 06H. See notes above. Franklin Electric / 60 6 AWG 2 Franklin Electric / 60 6 AWG 2 Franklin Electric / 60 6 AWG 2 Franklin Electric

23/05/08 E52 Submersible Pump Accessories Pumptech Pump Protection 580-0070-600 Quick Disconnect Quick Disconnect

single phase, V submersible motors from 1/3 to 1 HP - Dry well conditions are detected when the motor load drops

The unit will automatically restart after 2 to 240 min. (adjustable).

and restart - Protects against low yield wells, worn pump parts, drop in water level, broken shaft or coupling,

Optimized to work with all Franklin 2 & 3 wire single phase motors from 1/3 to 1 1/2 HP and is equipped for IR

interrupts power when the motor load drops below a preset level or load drops quickly - Protects against dry well,

with remote - Load, voltage and status indicator lights 5800020600 Pumptec Protection System HP Rating Volts Hz

8 23/05/08 E52 Submersible Pump Accessories Pumptech Pump Protection Quick Disconnect Quick Disconnect Pumptec - Internal ( ) - Made for the Franklin QD Control Box and works with all Franklin 3 wire, single phase, V submersible motors from 1/3 to 1 HP - Dry well conditions are detected when the motor load drops below a factory preset or field calibrated level for more than 3 seconds. The unit will automatically restart after 2 to 240 min. (adjustable). - Under and over voltage will shut the unit off for 2 min. and restart - Protects against low yield wells, worn pump parts, drop in water level, broken shaft or coupling, clogged well screen, air or gas locked pump and low voltage Pumptec Protection System - External ( ) - Optimized to work with all Franklin 2 & 3 wire single phase motors from 1/3 to 1 1/2 HP and is equipped for IR remote control - Microcomputer based device that continuously monitors motor load and power line conditions and interrupts power when the motor load drops below a preset level or load drops quickly - Protects against dry well, over & under voltage, rapid cycle, bound pump and waterlogged tanks - Automatic reset from 2 to 120 minutes, 240 with remote - Load, voltage and status indicator lights Pumptec Protection System HP Rating Volts Hz Brand Part 1/3 to 1 50/60 Franklin Electric /3 to 1 1/2 115 / 50/60 Franklin Electric Davies Stocks A Wide Selection Of Control Box Accessories. See Our Index For These And Many More Items! Capacitors Capacitor Overload Assemblies Overload Kits Relays

17/04/15 Pitless Adapters - Bronze E53 Submersible Pump Accessories Bronze construction For 1" adapters use 1

25% Third Party Drop Pipe Casing Working Load lbs.

CW-4-10WA Bronze construction Casing Inside Diameter Outside Diameter Drop Pipe Working Load lbs.

9 17/04/15 Pitless Adapters - Bronze E53 Submersible Pump Accessories Bronze construction For 1" adapters use 1 3/4" hole saw for installation For 1 1/4" adapters use 2 1/4" hole saw for installation No Lead <0.25% Third Party Drop Pipe Casing Working Load lbs. Part 1" 1" 5" to 12" 2000 PA100NL 1 1/4" 1 1/4" 5" to 12" 2000 PA125NL Pitless Adapters - Bronze Strap-On CW-4-10WA Bronze construction Casing Inside Diameter Outside Diameter Drop Pipe Working Load lbs. Part Dicken "Wrap Around" For PVC Casing 41/4" 4 1/2" 1" 2000 CW-4-10WA Dicken "Clear Way" For Steel Casing 4 1/2" to 5" 5" to 5 9/16" 1" 2000 CW /8" to 6" 6" to 6 5/8" 1" 2000 CW-6-10 CW-6-10

17/04/15 E54 Submersible Pump Accessories Rope Adapters - Bronze 1" MPT x 1" INS 1 1/4" MPT

submersible pumps from starting torque damage Precision molded to exacting specifications

D Two piece design Eliminates flashing problems Securely fasten to 1" or 1 1/4" drop pipe

10 17/04/15 E54 Submersible Pump Accessories Rope Adapters - Bronze 1" MPT x 1" INS 1 1/4" MPT x 1 1/4" INS of Barbs Part 7 BMA-100-ETNL 7 BMA-125-ETNL Torque Arrestor Protects submersible pumps from starting torque damage Precision molded to exacting specifications Snug fit in all well casings from 4" to 8" I.D Two piece design Eliminates flashing problems Securely fasten to 1" or 1 1/4" drop pipe Two stainless steel clamps included Infinite adjustment feature enables installer to obtain proper fit Black Casing Drop Pipe Part 4" to 8" 1" to 1 1/4" TA48

10/07/15 E55 Submersible Pump Accessories Submersible Pump Cable - 4 Conductor - CSA Flat Jacketed Conductors: 14 AWG to 10 AWG bare copper Insulation/Jacket: Polyvinyl chloride (PVC) Voltage Rating:

75 For use with submersible water pumps installed in wells, lakes, rivers, and streams in accordance with CSA C22.

Electrical Code (CEC) Marked "Direct Burial" to indicate suitability for direct earth burial Marked "SR" for Sunlight Resistance with Black Jacket Colour (required for outdoor storage) Cable is

11 10/07/15 E55 Submersible Pump Accessories Submersible Pump Cable - 4 Conductor - CSA Flat Jacketed Conductors: 14 AWG to 10 AWG bare copper Insulation/Jacket: Polyvinyl chloride (PVC) Voltage Rating: 600V Temperature Rating: -40 C* to 60 C Flame Rating: FT1, VW-1 Standards: CSA C22.2 No. 75 For use with submersible water pumps installed in wells, lakes, rivers, and streams in accordance with CSA C22.1 Canadian Electrical Code Part 1, section 26, rules and Marked "Submersible Pump Cable" and "-40 C" as required by the Canadian Standards Association (CSA) and by the Canadian Electrical Code (CEC) Marked "Direct Burial" to indicate suitability for direct earth burial Marked "SR" for Sunlight Resistance with Black Jacket Colour (required for outdoor storage) Cable is sequentially "Ft" marked to show length remaining on reel Sold by the foot (Full Reel is 984 ft. / 300 meters) Reel Length 984' / 300m 984' / 300m 984' / 300m B, R & Y Conductors AWG G (Ground Wire) Conductor AWG No. Of Strands Per Conductor Part #14 #14 (7) Stranded TWUFJ14-4 #12 #12 (7) Stranded TWUFJ12-4 #10 #10 (7) Stranded TWUFJ10-4 *The 40C low temp rating indicates that the cables have passed and a cold bend test under carefully controlled lab conditions. These conditions may or may not reflect actual field conditions. It is therefore recommended that all cables be warmed to at least 10C before installation. Well Caps Aluminum construction Stainless steel set screws Fitted for 1" conduit Casing Part Inside Diameter Outside Diameter 4" 4 1/2" WCC-A04 5" 5 1/2" WCC-A05 6" 6 5/8" WCC-A06 Well Seals - Single & Double Drop Pipe For submersible & jet pump applications Well I.D. Drop Pipe Vent Conduit Weight lbs. Part Single Drop Pipe 4" 1 1/4" 1/4" 3/4" 4 WS4012 6" 1 1/4" 1/2" 1" 9 WS /4" 1" 1/2" 1" 10 1/2 WS /4" 1 1/4" 1/2" 1" 9 WS6212 Double Drop Pipe 4" 1 1/4" x 1" 1/2" - 3 1/2 WS Davies Has Control Boxes, Poly Rope, Tanks & Tank Tee Packages

4" SUBMERSIBLE PUMP 4" SUBMERSIBLE PUMP. "GS" series. "ST" series. "SL" series. ST Series (stainless steel) SL Series (thermoplastic)

4 SUBMERSIBLE PUMP 4 SUBMERSIBLE PUMP. GS series. ST series. SL series. ST Series (stainless steel) SL Series (thermoplastic) 4" SUBMERSIBLE PUMP 4" SUBMERSIBLE PUMP ST / GS SERIES (stainless steel) SL SERIES (thermoplastic) The "ST / GS / SL" series are built with such precision that they provide a superior output for many years.