4" submersible pumps 10, 15, 20, and 30 gpm

Transcription

1 UL Classified to ANSI/NSF Standard 6, Drinking Water Systems Components Health Effects Precision-engineered, corrosionresistant Signature 2000 Composite Pumps in 0, 5, 20 and 30 GPM deliver efficient, dependable performance even in rough, aggressive water. Heads to over 650 feet and capacities to 45 GPM. Built to deliver longterm, trouble-free service. These pumps feature the patented SignaSeal staging system. Floating impeller design resists sand and reduces sand locking. APPLICATIONS Water systems for residential, industrial, commercial, multiple housing and farm use. SPECIFICATIONS Shell Stainless steel Diameter 3-7/8" Discharge Fiberglass-reinforced thermoplastic Discharge Bearing Nylatron Intermediate Bearing (On larger units) Polycarbonate, nitrile rubber and stainless steel. Impellers Acetal Diffusers Polycarbonate Suction Caps Polycarbonate with stainless steel insert Thrust Pads Proprietary spec. Shaft and Coupling Stainless steel Intake Fiberglass-reinforced thermoplastic Intake Screen Polypropylene CableGuard Stainless steel Check Valve Acetal Agency Listings UL and CSA Nylatron is a registered trademark of Polymer Corp. Signature 2000 is a registered trademark of WICOR Industries. PRO-Source, SignaSeal, and TrimLine are trademarks of WICOR Industries. In order to provide the best products possible, specifications are subject to change. COMPOSITE FEATURES Patented Staging System Our proven SignaSeal staging system incorporates a harder-than-sand ceramic wear surface that when incorporated with our floating impeller design, greatly reduces problems with abrasives, sand lockup and running dry. Discharge Corrosion-resistant fiberglass reinforced thermoplastic for durability in aggressive water. Large octagon wrench area for ease of installation. Discharge Bearing Exclusive self-lubricating Nylatron bearing resists wear from sand. Intake Corrosion-resistant fiberglass reinforced thermoplastic for durability in aggressive water. Shaft Positive drive from 7/6" hexagonal heavy-duty 300 grade stainless steel. Coupling Stainless steel press fit to pump shaft. Couples to all standard NEMA motors. Shell Heavy-walled corrosionresistant stainless steel. Threaded for easy servicing. Hardware All screws, washers and nuts are corrosion-resistant 300 grade stainless steel. Check Valve Durable internal poppitt type check valve. Cable Guard Corrosion-resistant stainless steel guard protects motor leads. Tapered ends prevent pump from catching on well. Intake Screen Corrosion-proof polypropylene. Franklin Electric Motor 2 and 3 wire NEMA standard super stainless series water-filled motors.

2 ORDERING INFORMATION Assembled Pump Pump End Motor Control Box Motor Catalog Length Weight Catalog Length Weight Catalog Weight Catalog Weight GPM Type HP Stgs. PH Volt Number Inches* Pounds* Number Inches* Pounds* Number Pounds* Number Pounds* / SP4C0J L0P4CJ 2 8-/2 P28-079C 22 / SP4C02J L0P4CJ 2 8-/2 P28-080C 22 2 Wire 3/ SP4D02J L0P4DJ 3-3/4 9-/2 P28-08C SP4E02J L0P4EJ 5-/2 0-/4 P28-082C 29 -/ SP4F02J 34 4 L0P4FJ 9 2 P28-327C 39 0** / P4C0J L0P4CJ 2 8-/2 P28-072C 2 P / P4C02J L0P4CJ 2 8-/2 P28-073C 2 P / P4D02J L0P4DJ 3-3/4 9-/2 P28-074C 25 P Wire P4E02J L0P4EJ 5-/2 0-/4 P28-075C 28 P / P4F02J 32-3/4 4 L0P4FJ 9 2 P28-076C 3 P / L0P4FJ 9 2 P28-330C K4 6 -/ L0P4FJ 9 2 P28-279C K33 6 / SP4C0J 22-/4 27 L5P4CJ 2-/4 9 P28-079C 22 / SP4C02J 22-/4 27 L5P4CJ 2-/4 9 P28-080C 22 2 Wire 3/ SP4D02J 25-3/4 3 L5P4DJ 4-/2 0 P28-08C SP4E02J 29-/4 35 L5P4EJ 6-3/4 P28-082C 29 -/ SP4F02J 35-/4 43 L5P4FJ 20-/4 3 P28-327C 39 5** / P4C0J 22-/4 27 L5P4CJ 2-/4 9 P28-072C 2 P / P4C02J 22-/4 27 L5P4CJ 2-/4 9 P28-073C 2 P / P4D02J 25-3/4 3 L5P4DJ 4-/2 0 P28-074C 25 P Wire P4E02J 29-/4 35 L5P4EJ 6-3/4 P28-075C 28 P / P4F02J 33-3/4 4 L5P4FJ 20-/4 3 P28-076C 3 P / L5P4FJ 20-/4 3 P28-330C K4 6 -/ L5P4FJ 20-/4 3 P28-279C K33 6 3/ SP4D02J 23-3/4 30 L20P4DJ 2-/2 8-/2 P28-08C 26 2 Wire SP4E02J 27-/4 34 L20P4EJ 4-3/4 9-3/4 P28-082C 29 -/ SP4F02J L20P4FJ 6-3/4 0-3/4 P28-327C 39 3/ P4D02J 23-3/4 30 L20P4DJ 2-/2 8-/2 P28-074C 25 P P4E02J 27-/4 34 L20P4EJ 4-3/4 9-3/4 P28-075C 28 P / P4F02J 30-/2 39 L20P4FJ 6-3/4 0-3/4 P28-076C 3 P ** -/ L20P4FJ 6-3/4 0-3/4 P28-330C K4 6 3 Wire -/ L20P4FJ 6-3/4 0-3/4 P28-279C K L20P4GJ 20-/4 2-/2 P28-328C 43 P L20P4GJ 20-/4 2-/2 P28-33C K Wire L20P4GJ 20-/4 2-/2 P28-274C K SP4E02J 26-/2 35 L30P4EJ 4 0 P28-082C 29 -/ SP4F02J 30-/2 39 L30P4FJ 5-/4 P28-327C P4E02J 26-/2 35 L30P4EJ 4 0 P28-075C 28 P / P4F02J L30P4FJ 5-/4 P28-076C 3 P ** -/ L30P4FJ 5-/4 P28-330C K4 6 3 Wire -/ L30P4FJ 5-/4 P28-297C K L30P4GJ 8-/4 2 P28-328C 43 P L30P4GJ 8-/4 2 P28-33C K L30P4GJ 8-/4 2 P28-274C K33 6 *Length and Weight are approximate. **For 0 GPM, 5 GPM, 20 GPM, and 30 GPM discharge is -/4" NPT. NOTE: On 2 HP and larger pumps Motor, Control Box or Magnetic Starter must be ordered separately. 2

3 PUMP PERFORMANCE 0 GPM CAPACITY LITERS PER MINUTE PUMP PERFORMANCE 5 GPM CAPACITY LITERS PER MINUTE TOTAL HEAD IN FEET /2 HP HP 3/4 HP /2 HP TOTAL HEAD IN METERS TOTAL HEAD IN FEET /2 HP HP 3/4 HP /2 HP TOTAL HEAD IN METERS CAPACITY GALLONS PER MINUTE CAPACITY GALLONS PER MINUTE 0 PUMP PERFORMANCE 20 GPM PUMP PERFORMANCE 30 GPM CAPACITY LITERS PER MINUTE CAPACITY LITERS PER MINUTE TOTAL HEAD IN FEET HP -/2 HP HP 3/4 HP TOTAL HEAD IN METERS TOTAL HEAD IN FEET HP -/2 HP HP TOTAL HEAD IN METERS CAPACITY GALLONS PER MINUTE CAPACITY GALLONS PER MINUTE 3

4 OUTLINE DIMENSIONS 3-7/8 Pump End Discharge 0 GPM -/4" NPT 5 GPM -/4" NPT 20 GPM -/4" NPT 30 GPM -/4" NPT For lengths, refer to Ordering Information tables. Assembled Pump Dimensions (in inches) are for estimating purposes only. 4

5 0 Gallons per Minute HP /2 3/4 -/2 PUMP PERFORMANCE (Capacity in Gallons Per Minute) Pumping Depth in Feet Shutoff Head PSI Feet PSI CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. NOTE: Pumps installed with a PRO-Source tank require a 00 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. 5

6 5 Gallons per Minute PUMP PERFORMANCE (Capacity in Gallons Per Minute) Pumping Depth in Feet Shutoff Head HP PSI Feet PSI / / / CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. NOTE: Pumps installed with a PRO-Source tank require a 00 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. 6

7 20 Gallons per Minute HP 3/4 -/2 2 PUMP PERFORMANCE (Capacity in Gallons Per Minute) Shutoff Pumping Depth in Feet Head PSI Feet PSI CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. NOTE: Pumps installed with a PRO-Source tank require a 00 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. 7

8 30 Gallons per Minute HP -/2 2 PUMP PERFORMANCE (Capacity in Gallons Per Minute) Shutoff Pumping Depth in Feet Head PSI Feet PSI CAUTION: DO NOT use pump at flow rates indicated by the symbol. To do so can cause premature failure of unit. Pump warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards. NOTE: Pumps installed with a PRO-Source tank require a 00 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. S4559WS (7/04) Customer Service: (262)