4" SUBMERSIBLE PUMP. ST SERIES (stainless steel) FEATURES. OPTION Extended 5 years warranty plan offered by the manufacturer

Transcription

1 Section: 7 Page: 1 Cancel & replace: February 14, 5 4" SUBMERSIBLE PUMP ST SERIES (stainless steel) The "ST" (stainless steel) series of submersible pumps are built with precision to provide a superior output. They are also manufactured to be efficient for a long period of time in any condition, even in abrasive water. FEATURES Check valve - External check valve made of stainless steel Discharge & Motor bracket - Made of (304) stainless steel. Shaft - Hexagonal shaft made of (303) stainless steel for corrosion and wear resistance. Couplings - Made of stainless steel and fit perfectly to any 4" standard motor which allows for maximum efficiency. Diffuser - Injection molded in Noryl. Washer - Made of stainless steel, prevents wearing of the impellers and the diffusers. Impeller - Injection molded in Polycarbonate. Disc - Injection molded in Acetal. All parts (diffuser, impeller and disc) are designed to resist wearing in abrasive water. Top bearing - Injection molded in Polypropylene plus fibers, with a rubber centre for an even more precise alignment of the shaft. The rubber center considerably reduces wearing of the shaft caused by sand. Screen - Made of stainless steel, prevents the obstruction of the impellers from large debris. Cable guard - Made of stainless steel, corrosion resistant, protects motor lead. Housing - Made of (T-304) stainless steel, threaded for easy maintenance. Fasteners - All stainless steel fasteners. Motor - OPTION Extended 5 years warranty plan offered by the manufacturer

2 Section: 7 Page: 2 Cancel & replace: February 14, 5 4" SUBMERSIBLE PUMPS INCLUDED: PUMP - - LEAD - EXTERNAL S/S CHECK VALVE (CONTROL BOX with 3 WIRES S) H.P. 1/2 3/4 1 1½ 2 3 G.P.M. Stages Phase Voltage Part number 3 WIRES + GROUND 2 WIRES + GROUND Model Suggested list price Part number Model Suggested list price ST ST ST * ST * ST ST ST * ST * ST ST ST * ST * ST ST ST ST ST ST ST ST ST * ST * ST * ST * ST * ST * ST * ST * ST ST ST ST ST * ST ST * ST = available voltage ST volts ST "ST" SERIES G.P.M ST ST ST * ST ST * ST ST ST ST ST ST ST ST ST ST ST ST ST EXAMPLE OF NUMBER CODE ST ST SERIES G.P.M. H.P. 11 = 115 VOLTS 23 = 230 VOLTS DISCHARGE FOR G.P.M. 1/2 H.P. to 1 H.P. = 1" DISCHARGE FOR G.P.M. 1 ½ H.P. to 5 H.P. = 1 ¼" DISCHARGE FOR 20 G.P.M. 3/4 H.P. to 5 H.P. = 1 ¼" WARNING: These pumps may develop very high pressure. A pressure valve must be installed on the tank to avoid possible danger of the tank bursting that can cause property damage and/or personal injury or death. 2 WIRES 3 WIRES

3 Section: 7 Page: 3 Cancel & replace: February 14, 5 4" SUBMERSIBLE PUMP "ST" SERIES "ST" SERIES PUMP END ROTATING KIT H.P. G.P.M. Stages Part # Model Price Part # Price ST ST / ST ST ST ST ST / ST ST ST ST ST ST ST ST ½ ST ST ST ST ST ST ST ST EXAMPLE OF NUMBER CODE ST 5-50 R ST 5 50 SERIES G.P.M. H.P. ROTATING KIT R Part number TEE KITS FOR SUBMERSIBLE PUMPS CIC 100 B Tank tee CIC 100 BC Tank tee FSG-2 Pressure switch FSG-2M4 Pressure switch PPG L Pressure gauge 1/4 X 3 Brass nipple Teflon HNKD-50 Boiler drain RV lbs Relief valve * * * ACCESSORY KITS FOR SUBMERSIBLE PUMPS Sugg. price Part number TA-48 Torque arrestor B12C-1" Male adapter MA Male adapter FA-100 Female adapter A4C Splicing kit A3C Splicing kit Teflon HF 16 SS Clamp PT-10 Pitless PT-100 Pitless LDS-10 Pitless * * * * * * * list price

4 Section: 7 Page: 4 Cancel & replace: February 14, 5 PUMPING CURVES 5 G.P.M. Efficiency area Meters Feet P.S.I STAGES STAGES 280 TOTAL HEAD DISCHARGE STAGES STAGES STAGES USGPM 0 L/MIN CAPACITY 0

5 Section: 7 Page: 5 Cancel & replace: PERFORMANCE CHART 5 G.P.M. H.P. P.S.I FEET P.S.I. 1/ Stages / Stages H.P. 1 P.S.I FEET P.S.I Stages ½ Stages Numbers in italic-bold indicate the maximum efficiency zone To convert feet to meters multiply by To convert U.S. gallon to liters multiply by 3.785

6 Section: 7 Page: 6 Cancel & replace: PUMPING CURVES 8 G.P.M. Efficiency area Meters Feet P.S.I STAGES 360 TOTAL HEAD DISCHARGE STAGES STAGES STAGES STAGES STAGES USGPM 0 L/MIN CAPACITY 0

7 Section: 7 Page: 7 Cancel & replace: H.P. P.S.I FEET P.S.I. 1/2 PERFORMANCE CHART 8 G.P.M Stages / Stages Stages H.P. 1 ½ P.S.I FEET P.S.I Stages Stages Numbers in italic-bold indicate the maximum efficiency zone To convert feet to meters multiply by To convert U.S. gallon to liters multiply by 3.785

8 Section: 7 Page: 8 Cancel & replace: PUMPING CURVES 12 G.P.M. Efficiency area Meters Feet P.S.I STAGES TOTAL HEAD DISCHARGE STAGES STAGES STAGES STAGES STAGES STAGES USGPM 0 L/MIN CAPACITY 0

9 Section: 7 Page: 9 Cancel & replace: H.P. P.S.I FEET P.S.I. 1/ Stages PERFORMANCE CHART 12 G.P.M / Stages Stages H.P. P.S.I FEET P.S.I ½ Stages Stages Stages

10 Section: 7 Page: 10 Cancel & replace: PUMPING CURVES 20 G.P.M. Efficiency area Meters Feet P.S.I STAGES TOTAL HEAD DISCHARGE STAGES STAGES STAGES STAGES STAGES STAGES 40 USGPM 0 L/MIN CAPACITY 0

11 Section: 7 Page: 11 Cancel & replace: H.P. P.S.I FEET P.S.I. 3/ Stages PERFORMANCE CHART 20 G.P.M Stages H.P. P.S.I FEET P.S.I. 1 ½ Stages H.P Stages P.S.I FEET P.S.I Stages Stages

12 Section: 7 Page: 12 Cancel & replace: " SUBMERSIBLE PUMP DIMENSIONS & WEIGHT Shipping weight lbs (kg) Model Stages Ph. Total length (A) in (cm) Motor length (B) in (cm) Pump end length (C) in (cm) 3 WIRES + GROUND 2 WIRES + GROUND (69.21) 9.50 (24.13) (45.00) 33 (15) 30 (14) (83.81) (27.31) (56.50) 38 (17) 35 (16) (94.00) (29.85) (64.18) 42 (19) 39 (18) (112.4) (34.29) (77.50) 54 (24) (108.0) (29.85) (77.50) 42 (19) 3.75 in (9.53 cm) Pump end length (C) Motor length (B) Total length (A) (61.60) 9.50 (24.13) (37.50) 32 (14) 29 (13) (72.43) (27.31) (43.13) 36 (16) 33 (15) (80.37) (29.85) (50.50) 40 (18) 37 (17) (99.00) (34.29) (64.70) 53 (24) (97.16) (29.85) (64.70) 41 (19) (114.3) (38.40) (76.20) 58 (26) (110.5) (34.29) (76.20) 48 (22) (59.69) 9.50 (24.13) (35.50) 31 (14) 28 (13) (68.26) (27.31) (41.00) 35 (16) 32 (15) (76.51) (29.85) (46.67) 39 (18) 36 (16) (93.35) (34.29) (59.05) 51 (23) (88.90) (29.85) (59.05) 39 (18) (100.9) (38.40) (62.87) 55 (25) (97.16) (34.29) (62.87) 46 (21) (135.9) (59.69) (76.20) 80 (36) (128.3) (52.07) (76.20) 62 (28) (54.93) 9.50 (24.13) (30.80) 30 (14) 27 (12) (70.80) (27.31) (43.50) 36 (16) 33 (15) (78.42) (29.85) (48.60) 39 (18) 36 (16) (93.03) (34.29) (58.74) 51 (23) (88.58) (29.85) (58.74) 39 (18) (109.2) (38.40) (71.12) 55 (25) (105.4) (34.29) (71.12) 46 (21) (143.5) (59.69) (83.82) 81 (36) (135.9) (52.07) (83.82) 63 (29) (184.2) (74.93) (109.2) 100 (45) (168.9) (59.69) (109.2) 78 (35)

13 Section: 7 Page: 13 Cancel & replace: February 14, 5 VARIABLE SPEED SUBMERSIBLE PUMP SUBDRIVE 75 / 150 The POMPCO variable speed submersible pump is an innovative system that enable homeowners to obtain constant water pressure. People can now get city-like water pressure from their wells. This innovative variable speed pump is designed for applications with a wide range of flow demand, including large homes, ground source heat pumps, and sprinkler systems. The POMPCO - Subdrive 75 is designed for use with a 3/4 HP pump mounted to a 1.5 HP Franklin Electric motor (3 phases). The POMPCO - Subdrive 150 is designed for use with a 1.5 HP pump mounted to a 3.0 HP Franklin Electric motor (3 phases). FEATURES & BENEFITS? Constant water pressure with a wide range of settings (25 to 80 psi)? Works with a standard motor between 1800 and 4800 RPM.? Works with small pressure tanks or larger tanks already in place. - Minimum tank volume: 2 gallons (SUBDRIVE 75) - Minimum tank volume: 4 gallons (SUBDRIVE 150)? Installation is as simple as installing a control box.? Water faucets can be installed between well and controller.? Soft start an stop means less motor stress and longer motor life.? Built-in diagnostics and protection. - Surge protection - Open / Short circuit - Underload - Undervoltage - Overheated controller - Locked pump? Smart Reset technology allows well recovery before restarting the pump. Order number Model Stages HP Volt Ph. Recommended pressure tank Prix détail suggéré SUBDRIVE ST5-75-SB gallons * ST8-75-SB gallons * ST12-75-SB gallons * ST20-75-SB gallons * SUBDRIVE ST8-150-SB gallons * ST SB gallons * ST SB gallons * SUBDRIVE CONTROL SUBDRIVE * SUBDRIVE

14 Section: 7 Page: 14 Cancel & replace: February 14, 5 FAULT CODES # of Flashes Fault 1 Motor underload Possible cause Dry well Broken motor shaft 2 Undervoltage Low line voltage 3 Locked pump Sand-bound pump 4 5 Open circuit NOT USED Loose connection Defective motor or cable 6 Short circuit Defective motor or cable 7 Overheated controller High ambiant temperature Direct sunlight Copper wire size (AWG) Maximum length between the electrical input and the motor (feet) Wire sizing Model Shipping weight lbs (kg) SubDrive (6.25) SubDrive (7.75)

15 Section: 7 Page: 15 Cancel & replace: February 14, 5 PUMPING CURVE SB GPM Meters Feet P.S.I TOTAL HEAD DISCHARGE SB - 9 STAGES 8-75SB - 13 STAGES 12-75SB - 11 STAGES 5-75SB - 19 STAGES USGPM 0 L/MIN CAPACITY 0

16 Section: 7 Page: 16 Cancel & replace: February 14, 5 PUMPING CURVE SB GPM Meter Feet P.S.I TOTAL HEAD DISCHARGE SB - 19 STAGES SB - 15 STAGES SB - 22 STAGES USGPM 0 L/MIN CAPACITY 0